rc/keymaps: add keytable for Pine64 IR Remote Controller
Subsystems (2)
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH 1/3 rc/keymaps: add keytable for Pine64 IR Remote Controller
This RC map is based on remote key schema at [1], the mouse button key did not have an obvious target and was mapped to KEY_CONTEXT_MENU.
[1] http://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg
--- drivers/media/rc/keymaps/Makefile | 1 + drivers/media/rc/keymaps/rc-pine64.c | 59 ++++++++++++++++++++++++++++ include/media/rc-map.h | 1 + 3 files changed, 61 insertions(+) create mode 100644 drivers/media/rc/keymaps/rc-pine64.c
drivers/media/rc/keymaps/Makefile +1 -0
@@ -76,6 +76,7 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \ rc-norwood.o \ rc-npgtech.o \ rc-pctv-sedna.o \ + rc-pine64.o \ rc-pinnacle-color.o \ rc-pinnacle-grey.o \ rc-pinnacle-pctv-hd.o \
drivers/media/rc/keymaps/rc-pine64.c new file +59 -0
59 lines not on this page · raw message
include/media/rc-map.h +1 -0
@@ -236,6 +236,7 @@ struct rc_map *rc_map_get(const char *name);#define RC_MAP_NORWOOD "rc-norwood"#define RC_MAP_NPGTECH "rc-npgtech"#define RC_MAP_PCTV_SEDNA "rc-pctv-sedna" +#define RC_MAP_PINE64 "rc-pine64"#define RC_MAP_PINNACLE_COLOR "rc-pinnacle-color"#define RC_MAP_PINNACLE_GREY "rc-pinnacle-grey"#define RC_MAP_PINNACLE_PCTV_HD "rc-pinnacle-pctv-hd"
Signature · 1 line
2.17.1
Sean Young
maintainerQuoted 2 lines · Jonas Karlman
This RC map is based on remote key schema at [1], the mouse button key did not have an obvious target and was mapped to
KEY_CONTEXT_MENU.
How about BTN_LEFT ?
Thanks,
Sean
Quoted 102 lines
[1] http://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg
Signed-off-by Jonas Karlman <[email protected]>--- drivers/media/rc/keymaps/Makefile | 1 + drivers/media/rc/keymaps/rc-pine64.c | 59 ++++++++++++++++++++++++++++ include/media/rc-map.h | 1 + 3 files changed, 61 insertions(+) create mode 100644 drivers/media/rc/keymaps/rc-pine64.cdrivers/media/rc/keymaps/Makefile +1
-0@@ -76,6 +76,7 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \ rc-norwood.o \ rc-npgtech.o \ rc-pctv-sedna.o \ + rc-pine64.o \ rc-pinnacle-color.o \ rc-pinnacle-grey.o \ rc-pinnacle-pctv-hd.o \drivers/media/rc/keymaps/rc-pine64.c new file +59
-0@@ -0,0 +1,59 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Keytable for Pine64 IR Remote Controller +// Copyright (c) 2017 Jonas Karlman + +#include <media/rc-map.h> +#include <linux/module.h> + +static struct rc_map_table pine64[] = { + {0x404000 ,KEY_NUMERIC_0 }, + {0x404001 ,KEY_NUMERIC_1 }, + {0x404002 ,KEY_NUMERIC_2 }, + {0x404003 ,KEY_NUMERIC_3 }, + {0x404004 ,KEY_NUMERIC_4 }, + {0x404005 ,KEY_NUMERIC_5 }, + {0x404006 ,KEY_NUMERIC_6 }, + {0x404007 ,KEY_NUMERIC_7 }, + {0x404008 ,KEY_NUMERIC_8 }, + {0x404009 ,KEY_NUMERIC_9 }, + {0x40400a ,KEY_MUTE }, + {0x40400b ,KEY_UP }, + {0x40400c ,KEY_BACKSPACE }, + {0x40400d ,KEY_OK }, + {0x40400e ,KEY_DOWN }, + {0x404010 ,KEY_LEFT }, + {0x404011 ,KEY_RIGHT }, + {0x404017 ,KEY_VOLUMEDOWN }, + {0x404018 ,KEY_VOLUMEUP }, + {0x40401a ,KEY_HOME }, + {0x40401d ,KEY_MENU }, + {0x40401f ,KEY_WWW }, + {0x404045 ,KEY_BACK }, + {0x404047 ,KEY_CONTEXT_MENU }, + {0x40404d ,KEY_POWER }, +}; + +static struct rc_map_list pine64_map = { + .map = { + .scan = pine64, + .size =ARRAY_SIZE (pine64), + .rc_proto =RC_PROTO_NECX , + .name =RC_MAP_PINE64 , + } +}; + +static int __init init_rc_map_pine64 (void ) +{ +return rc_map_register (&pine64_map); +} + +static void __exit exit_rc_map_pine64(void) +{ +rc_map_unregister (&pine64_map); +} + +module_init(init_rc_map_pine64) +module_exit(exit_rc_map_pine64) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR ("Jonas Karlman" );include/media/rc-map.h +1
-0@@ -236,6 +236,7 @@ struct rc_map *rc_map_get(const char *name);#define RC_MAP_NORWOOD "rc-norwood"#define RC_MAP_NPGTECH "rc-npgtech"#define RC_MAP_PCTV_SEDNA "rc-pctv-sedna" +#define RC_MAP_PINE64 "rc-pine64"#define RC_MAP_PINNACLE_COLOR "rc-pinnacle-color"#define RC_MAP_PINNACLE_GREY "rc-pinnacle-grey"#define RC_MAP_PINNACLE_PCTV_HD "rc-pinnacle-pctv-hd"Signature · 1 line
2.17.1
Quoted 4 lines · Sean Young
Quoted 2 lines · Jonas Karlman
This RC map is based on remote key schema at [1], the mouse button key did not have an obvious target and was mapped to
KEY_CONTEXT_MENU.How about
BTN_LEFT?
That should work, I only looked at the KEY_ events :-)
I will send a v2 using BTN_LEFT instead of KEY_CONTEXT_MENU.
Regards,
Jonas
Quoted 106 lines
Thanks,
Sean
Quoted 101 lines
[1] http://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg
Signed-off-by Jonas Karlman <[email protected]>--- drivers/media/rc/keymaps/Makefile | 1 + drivers/media/rc/keymaps/rc-pine64.c | 59 ++++++++++++++++++++++++++++ include/media/rc-map.h | 1 + 3 files changed, 61 insertions(+) create mode 100644 drivers/media/rc/keymaps/rc-pine64.cdrivers/media/rc/keymaps/Makefile +1
-0@@ -76,6 +76,7 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \ rc-norwood.o \ rc-npgtech.o \ rc-pctv-sedna.o \ + rc-pine64.o \ rc-pinnacle-color.o \ rc-pinnacle-grey.o \ rc-pinnacle-pctv-hd.o \drivers/media/rc/keymaps/rc-pine64.c new file +59
-0@@ -0,0 +1,59 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Keytable for Pine64 IR Remote Controller +// Copyright (c) 2017 Jonas Karlman + +#include <media/rc-map.h> +#include <linux/module.h> + +static struct rc_map_table pine64[] = { + {0x404000 ,KEY_NUMERIC_0 }, + {0x404001 ,KEY_NUMERIC_1 }, + {0x404002 ,KEY_NUMERIC_2 }, + {0x404003 ,KEY_NUMERIC_3 }, + {0x404004 ,KEY_NUMERIC_4 }, + {0x404005 ,KEY_NUMERIC_5 }, + {0x404006 ,KEY_NUMERIC_6 }, + {0x404007 ,KEY_NUMERIC_7 }, + {0x404008 ,KEY_NUMERIC_8 }, + {0x404009 ,KEY_NUMERIC_9 }, + {0x40400a ,KEY_MUTE }, + {0x40400b ,KEY_UP }, + {0x40400c ,KEY_BACKSPACE }, + {0x40400d ,KEY_OK }, + {0x40400e ,KEY_DOWN }, + {0x404010 ,KEY_LEFT }, + {0x404011 ,KEY_RIGHT }, + {0x404017 ,KEY_VOLUMEDOWN }, + {0x404018 ,KEY_VOLUMEUP }, + {0x40401a ,KEY_HOME }, + {0x40401d ,KEY_MENU }, + {0x40401f ,KEY_WWW }, + {0x404045 ,KEY_BACK }, + {0x404047 ,KEY_CONTEXT_MENU }, + {0x40404d ,KEY_POWER }, +}; + +static struct rc_map_list pine64_map = { + .map = { + .scan = pine64, + .size =ARRAY_SIZE (pine64), + .rc_proto =RC_PROTO_NECX , + .name =RC_MAP_PINE64 , + } +}; + +static int __init init_rc_map_pine64 (void ) +{ +return rc_map_register (&pine64_map); +} + +static void __exit exit_rc_map_pine64(void) +{ +rc_map_unregister (&pine64_map); +} + +module_init(init_rc_map_pine64) +module_exit(exit_rc_map_pine64) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR ("Jonas Karlman" );include/media/rc-map.h +1
-0@@ -236,6 +236,7 @@ struct rc_map *rc_map_get(const char *name);#define RC_MAP_NORWOOD "rc-norwood"#define RC_MAP_NPGTECH "rc-npgtech"#define RC_MAP_PCTV_SEDNA "rc-pctv-sedna" +#define RC_MAP_PINE64 "rc-pine64"#define RC_MAP_PINNACLE_COLOR "rc-pinnacle-color"#define RC_MAP_PINNACLE_GREY "rc-pinnacle-grey"#define RC_MAP_PINNACLE_PCTV_HD "rc-pinnacle-pctv-hd"Signature · 1 line
2.17.1
PATCH 2/3 rc/keymaps: add keytable for ODROID IR Remote Controller
In reply to a message not in the archiveThis RC map is based on remote key schema at [1]
[1] https://wiki.odroid.com/accessory/connectivity/ir_remote_controller
--- drivers/media/rc/keymaps/Makefile | 1 + drivers/media/rc/keymaps/rc-odroid.c | 46 ++++++++++++++++++++++++++++ include/media/rc-map.h | 1 + 3 files changed, 48 insertions(+) create mode 100644 drivers/media/rc/keymaps/rc-odroid.c
drivers/media/rc/keymaps/Makefile +1 -0
@@ -75,6 +75,7 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \ rc-nec-terratec-cinergy-xs.o \ rc-norwood.o \ rc-npgtech.o \ + rc-odroid.o \ rc-pctv-sedna.o \ rc-pine64.o \ rc-pinnacle-color.o \
drivers/media/rc/keymaps/rc-odroid.c new file +46 -0
46 lines not on this page · raw message
include/media/rc-map.h +1 -0
@@ -235,6 +235,7 @@ struct rc_map *rc_map_get(const char *name);#define RC_MAP_NEC_TERRATEC_CINERGY_XS "rc-nec-terratec-cinergy-xs"#define RC_MAP_NORWOOD "rc-norwood"#define RC_MAP_NPGTECH "rc-npgtech" +#define RC_MAP_ODROID "rc-odroid"#define RC_MAP_PCTV_SEDNA "rc-pctv-sedna"#define RC_MAP_PINE64 "rc-pine64"#define RC_MAP_PINNACLE_COLOR "rc-pinnacle-color"
Signature · 1 line
2.17.1
PATCH 3/3 rc/keymaps: add keytable for Khadas IR Remote Controller
In reply to a message not in the archiveThe mouse button key did not have an obvious target and was mapped to KEY_CONTEXT_MENU.
--- drivers/media/rc/keymaps/Makefile | 1 + drivers/media/rc/keymaps/rc-khadas.c | 46 ++++++++++++++++++++++++++++ include/media/rc-map.h | 1 + 3 files changed, 48 insertions(+) create mode 100644 drivers/media/rc/keymaps/rc-khadas.c
drivers/media/rc/keymaps/Makefile +1 -0
@@ -58,6 +58,7 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \ rc-it913x-v1.o \ rc-it913x-v2.o \ rc-kaiomy.o \ + rc-khadas.o \ rc-kworld-315u.o \ rc-kworld-pc150u.o \ rc-kworld-plus-tv-analog.o \
drivers/media/rc/keymaps/rc-khadas.c new file +46 -0
46 lines not on this page · raw message
include/media/rc-map.h +1 -0
@@ -218,6 +218,7 @@ struct rc_map *rc_map_get(const char *name);#define RC_MAP_IT913X_V1 "rc-it913x-v1"#define RC_MAP_IT913X_V2 "rc-it913x-v2"#define RC_MAP_KAIOMY "rc-kaiomy" +#define RC_MAP_KHADAS "rc-khadas"#define RC_MAP_KWORLD_315U "rc-kworld-315u"#define RC_MAP_KWORLD_PC150U "rc-kworld-pc150u"#define RC_MAP_KWORLD_PLUS_TV_ANALOG "rc-kworld-plus-tv-analog"
Signature · 1 line
2.17.1