board/freescale: Enable DHCP distro boot for Layerscape board
PATCH 1/1 board/freescale: Enable DHCP distro boot for Layerscape board
Enable DHCP distro boot for Layerscape
--- include/configs/ls1012a_common.h | 5 +++-- include/configs/ls1021atwr.h | 3 ++- include/configs/ls1043a_common.h | 3 ++- include/configs/ls1046a_common.h | 3 ++- include/configs/ls1088ardb.h | 3 ++- include/configs/ls2080ardb.h | 3 ++- 6 files changed, 13 insertions(+), 7 deletions(-)
include/configs/ls1012a_common.h +3 -2
@@ -96,9 +96,10 @@#ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES (func) \ - func(SCSI, scsi, 0) \ func(MMC, mmc, 0) \ - func(USB, usb, 0) + func(USB, usb, 0) \ + func(SCSI, scsi, 0) \ + func(DHCP, dhcp, na)#include <config_distro_bootcmd.h> #endif
include/configs/ls1021atwr.h +2 -1
@@ -315,7 +315,8 @@#define BOOT_TARGET_DEVICES (func) \ func(MMC, mmc, 0) \ - func(USB, usb, 0) + func(USB, usb, 0) \ + func(DHCP, dhcp, na)#include <config_distro_bootcmd.h> #ifdef CONFIG_LPUART
include/configs/ls1043a_common.h +2 -1
@@ -239,7 +239,8 @@#ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES (func) \ func(MMC, mmc, 0) \ - func(USB, usb, 0) + func(USB, usb, 0) \ + func(DHCP, dhcp, na)#include <config_distro_bootcmd.h> #endif
include/configs/ls1046a_common.h +2 -1
@@ -213,7 +213,8 @@#define BOOT_TARGET_DEVICES (func) \ func(SCSI, scsi, 0) \ func(MMC, mmc, 0) \ - func(USB, usb, 0) + func(USB, usb, 0) \ + func(DHCP, dhcp, na)#include <config_distro_bootcmd.h> #endif
include/configs/ls1088ardb.h +2 -1
@@ -577,7 +577,8 @@#define BOOT_TARGET_DEVICES (func) \ func(MMC, mmc, 0) \ - func(SCSI, scsi, 0) + func(SCSI, scsi, 0) \ + func(DHCP, dhcp, na)#include <config_distro_bootcmd.h> #endif
include/configs/ls2080ardb.h +2 -1
@@ -333,7 +333,8 @@ unsigned long get_board_sys_clk(void);#define BOOT_TARGET_DEVICES (func) \ func(USB, usb, 0) \ func(MMC, mmc, 0) \ - func(SCSI, scsi, 0) + func(SCSI, scsi, 0) \ + func(DHCP, dhcp, na)#include <config_distro_bootcmd.h> #ifdef CONFIG_TFABOOT
Signature · 1 line
2.17.1
PATCH 1/1 board/freescale: Enable DHCP distro boot for Layerscape board
Dear Yunfeng,
Quoted 9 lines
-----Original Message-----
From: Yunfeng Ding <[email protected]>
Sent: Tuesday, February 19, 2019 12:14 PM
To: Prabhakar Kushwaha <[email protected]>; u-
boot at lists.denx.de
Cc: Yunfeng Ding <[email protected]>
Subject: [PATCH] board/freescale: Enable DHCP distro boot for Layerscape board
Quoted 4 lines
Enable DHCP distro boot for Layerscape
Signed-off-by Yunfeng Ding <[email protected]>
In internal discussions, it was decided not to enable DHCP boot in distro. It take lots of time if DHCP server is not present for booting tiny Linux
Let's discuss again internally for this patch...
--pk
PATCH 1/1 board/freescale: Enable DHCP distro boot for Layerscape board
In reply to Yunfeng DingQuoted 10 lines
-----Original Message-----
From: Yunfeng Ding <[email protected]>
Sent: Tuesday, February 19, 2019 12:14 PM
To: Prabhakar Kushwaha <[email protected]>; u-
boot at lists.denx.de
Cc: Yunfeng Ding <[email protected]>
Subject: [PATCH] board/freescale: Enable DHCP distro boot for Layerscape board
Quoted 4 lines
Enable DHCP distro boot for Layerscape
Signed-off-by Yunfeng Ding <[email protected]>
Updated patch only for ls1012a and ls1021a. Previous patch from other author has enabled same for LS1088A, LS2088A.
Applied to u-boot-fsl-qoriq, awaiting upstream
--pk