Devicetree updates for Exynos 5260
Subsystems (2)
v2 cover Devicetree updates for Exynos 5260
These four patches are stand alone updates for the Exynos 5260 device tree, which do not depend on any other code changes. They either fix issues or add functionality which is already available on other Exynos devices. They were previously posted as version 1 of the larger patch series "Resuscitate Exynos 5260 support"
https://www.spinics.net/lists/linux-samsung-soc/#65035
which was only posted to the samsung-soc mailing list.
Changes since v1:
- Removed from larger patch set for easier review
- Applied reviewer comments to patch 2/4 "Add high speed I2C ports for exynos5260"
- Expanded patch comments
Stuart Menefy (4):
ARM: dts: exynos: Use bustop PLL as the source for MMC clocks on
Exynos5260
ARM: dts: exynos: Add high speed I2C ports for exynos5260
ARM: dts: exynos: Add interrupts for dedicated EINTs on Exynos5260
ARM: dts: exynos: Fix interrupt for shared EINTs on Exynos5260
arch/arm/boot/dts/exynos5260-pinctrl.dtsi | 16 ++++++ arch/arm/boot/dts/exynos5260.dtsi | 82 ++++++++++++++++++++++++++++++- 2 files changed, 97 insertions(+), 1 deletion(-)
Signature · 1 line
2.13.6
PATCH v2 1/4 ARM: dts: exynos: Use bustop PLL as the source for MMC clocks on Exynos5260
From: Stuart Menefy <[email protected]>
By default the MMC clock will be derived from mediatop PLL, which usually runs at 666MHz. However as most SD and MMC clocks are multiples or fractions of 100MHz, it makes more sense to use the bustop PLL which runs at 800MHz. This matches the behaviour of the Samsung vendor supplied 3.4 kernel.
--- arch/arm/boot/dts/exynos5260.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)
arch/arm/boot/dts/exynos5260.dtsi +24 -0
@@ -288,6 +288,14 @@ #size-cells = <0>; clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>; clock-names = "biu", "ciu"; + assigned-clocks = + <&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>, + <&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_B>, + <&clock_top TOP_SCLK_MMC0>; + assigned-clock-parents = + <&clock_top TOP_MOUT_BUSTOP_PLL_USER>, + <&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>; + assigned-clock-rates = <0>, <0>, <800000000>; fifo-depth = <64>; status = "disabled"; };
@@ -300,6 +308,14 @@ #size-cells = <0>; clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>; clock-names = "biu", "ciu"; + assigned-clocks = + <&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>, + <&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_B>, + <&clock_top TOP_SCLK_MMC1>; + assigned-clock-parents = + <&clock_top TOP_MOUT_BUSTOP_PLL_USER>, + <&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>; + assigned-clock-rates = <0>, <0>, <800000000>; fifo-depth = <64>; status = "disabled"; };
@@ -312,6 +328,14 @@ #size-cells = <0>; clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>; clock-names = "biu", "ciu"; + assigned-clocks = + <&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>, + <&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_B>, + <&clock_top TOP_SCLK_MMC2>; + assigned-clock-parents = + <&clock_top TOP_MOUT_BUSTOP_PLL_USER>, + <&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>; + assigned-clock-rates = <0>, <0>, <800000000>; fifo-depth = <64>; status = "disabled"; };
Signature · 1 line
2.13.6
PATCH v2 2/4 ARM: dts: exynos: Add high speed I2C ports for exynos5260
In reply to Stuart MenefyFrom: Stuart Menefy <[email protected]>
Most of the work to support the high speed I2C ports on the Exynos 5260 was added in commit 218e1496135e ("i2c: exynos5: add support for HSI2C on Exynos5260 SoC") and the pinctrl nodes have always been available. All that is missing to get them working is the additon of the DT bindings.
---
Changes since v1:
- Removed unused attribute: samsung,check-transdone-int
- Reordered additions so they now appear in address order
- Changed hex addresses to lower case
arch/arm/boot/dts/exynos5260.dtsi | 56 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+)
arch/arm/boot/dts/exynos5260.dtsi +56 -0
@@ -17,6 +17,10 @@ #size-cells = <1>; aliases { + i2c0 = &hsi2c_0; + i2c1 = &hsi2c_1; + i2c2 = &hsi2c_2; + i2c3 = &hsi2c_3; pinctrl0 = &pinctrl_0; pinctrl1 = &pinctrl_1; pinctrl2 = &pinctrl_2;
@@ -339,6 +343,58 @@ fifo-depth = <64>; status = "disabled"; }; + + hsi2c_0: hsi2c@12da0000 { + compatible = "samsung,exynos5260-hsi2c"; + reg = <0x12DA0000 0x1000>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_hs_bus>; + clocks = <&clock_peri PERI_CLK_HSIC0>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_1: hsi2c@12db0000 { + compatible = "samsung,exynos5260-hsi2c"; + reg = <0x12DB0000 0x1000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_hs_bus>; + clocks = <&clock_peri PERI_CLK_HSIC1>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_2: hsi2c@12dc0000 { + compatible = "samsung,exynos5260-hsi2c"; + reg = <0x12DC0000 0x1000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_hs_bus>; + clocks = <&clock_peri PERI_CLK_HSIC2>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_3: hsi2c@12dd0000 { + compatible = "samsung,exynos5260-hsi2c"; + reg = <0x12DD0000 0x1000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_hs_bus>; + clocks = <&clock_peri PERI_CLK_HSIC3>; + clock-names = "hsi2c"; + status = "disabled"; + }; }; };
Signature · 1 line
2.13.6
PATCH v2 3/4 ARM: dts: exynos: Add interrupts for dedicated EINTs on Exynos5260
In reply to Stuart MenefyFrom: Stuart Menefy <[email protected]>
Add the missing interrupt information for the GPIO lines with dedicated EINT interrupts.
--- arch/arm/boot/dts/exynos5260-pinctrl.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
arch/arm/boot/dts/exynos5260-pinctrl.dtsi +16 -0
@@ -153,6 +153,14 @@ #gpio-cells = <2>; interrupt-controller; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; };
@@ -161,6 +169,14 @@ #gpio-cells = <2>; interrupt-controller; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; };
Signature · 1 line
2.13.6
PATCH v2 4/4 ARM: dts: exynos: Fix interrupt for shared EINTs on Exynos5260
In reply to Stuart MenefyFrom: Stuart Menefy <[email protected]>
Fix the interrupt information for the GPIO lines with a shared EINT interrupt.
--- arch/arm/boot/dts/exynos5260.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/exynos5260.dtsi +1 -1
@@ -227,7 +227,7 @@ wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; interrupt-parent = <&gic>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; }; };
Signature · 1 line
2.13.6
Krzysztof Kozlowski
maintainerQuoted 15 lines · Stuart Menefy
These four patches are stand alone updates for the Exynos 5260 device tree, which do not depend on any other code changes. They either fix issues or add functionality which is already available on other Exynos devices. They were previously posted as version 1 of the larger patch series "Resuscitate Exynos 5260 support"
https://www.spinics.net/lists/linux-samsung-soc/#65035
which was only posted to the samsung-soc mailing list.Changes since v1:
- Removed from larger patch set for easier review
- Applied reviewer comments to patch 2/4 "Add high speed I2C ports for exynos5260"
- Expanded patch comments
Quoted 6 lines
Stuart Menefy (4):
ARM: dts: exynos: Use bustop PLL as the source for MMC clocks onExynos5260ARM: dts: exynos: Add high speed I2C ports for exynos5260
ARM: dts: exynos: Add interrupts for dedicated EINTs on Exynos5260
ARM: dts: exynos: Fix interrupt for shared EINTs on Exynos5260
Thanks for the changes. All look fine to me but it is too late to pick them up in this cycle. I will take them after merge window.
Best regards,
Krzysztof