Skip to contentSkip to conversation

hint needed : how to integrate sublvds to mipi csi-2 converter

DISCUSSION Philippe De Muyter 1 participant 1 message Feb 20, 2019 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hello,

I am working on a driver for sony sensors that output sublvds, but that must be connected to a processor expecting mipi csi-2.

We use a Lattice lif-md6000 fpga for that purpose, but unfortunately the conversion is not transparent. The fpga must be instructed to know the bpp and line-length that were configured in the sensor.

I woul like to avoid the burden for the user to configure the fpga properly when changing bpp or line-length in the sensor. How should I implement that. Is there an example somewhere ?

TIA

Philippe

Signature · 1 line
Philippe De Muyter +32 2 6101532 Macq SA rue de l'Aeronef 2 B-1140 Bruxelles