Skip to contentSkip to conversation

USB: serial: option: add Telit ME910 ECM composition

PATCH New Johan Hovold 1 participant 1 message Feb 20, 2019 USB

lore
Share & tools
lore

Johan Hovold

author
#0 lore raw

PATCH v2 1/1 USB: serial: option: add Telit ME910 ECM composition

Quoted 17 lines · Daniele Palmas

This patch adds Telit ME910 family ECM composition 0x1102.

Signed-off-by Daniele Palmas <[email protected]>

---
v2: add matching on interface class to remove blacklisting

lsusb verbose output:

---
 drivers/usb/serial/option.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/usb/serial/option.c +0 -0
index aef15497ff31..f6674fb7269a 100644

drivers/usb/serial/option.c static const struct usb_device_id option_ids[] = { · line 1152

Quoted 5 lines
drivers/usb/serial/option.c +2 -0
@@ -1148,6 +1148,8 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
 	  .driver_info = NCTRL(0) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1102, 0xff),
+	  .driver_info = NCTRL(0) }, /* TELIT ME910 (ECM) */

I moved the comment to the USB_DEVICE line for consistency with the other entries (it's ok to break the 80 col rule here).

drivers/usb/serial/option.c static const struct usb_device_id option_ids[] = { · line 1155

Quoted 3 lines
drivers/usb/serial/option.c +0 -0
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),

Now applied.

Thanks,
Johan