Skip to contentSkip to conversation

soc: fsl: qbman: avoid race in clearing QMan interrupt

PATCH New Sasha Levin 1 participant 19 messages Feb 28, 2019

Subsystems (10)
lore
Share & tools
lore
author maintainer
#2 lore raw

PATCH 3/19 arm64: dts: add msm8996 compatible to gicv3

In reply to Sasha Levin

From: Srinivas Kandagatla <[email protected]>

[ Upstream commit 2a81efb0de0e33f2d2c83154af0bd3ce389b3269 ]

Add compatible to gicv3 node to enable quirk required to restrict writing to GICR_WAKER register which is restricted on msm8996 SoC in Hypervisor.

With this quirk MSM8996 can at least boot out of mainline, which can help community to work with boards based on MSM8996.

Without this patch Qualcomm DB820c board reboots on mainline.

---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/qcom/msm8996.dtsi +1 -1
index 2c93de7fffe50..bdea2d6fde94a 100644
@@ -219,7 +219,7 @@
 		compatible = "simple-bus";
 
 		intc: interrupt-controller@9bc0000 {
-			compatible = "arm,gic-v3";
+			compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			#redistributor-regions = <1>;
Signature · 1 line
2.19.1
author maintainer
#7 lore raw

PATCH 8/19 vsock/virtio: fix kernel panic after device hot-unplug

In reply to Sasha Levin

From: Stefano Garzarella <[email protected]>

[ Upstream commit 22b5c0b63f32568e130fa2df4ba23efce3eb495b ]

virtio_vsock_remove() invokes the vsock_core_exit() also if there are opened sockets for the AF_VSOCK protocol family. In this way the vsock "transport" pointer is set to NULL, triggering the kernel panic at the first socket activity.

This patch move the vsock_core_init()/vsock_core_exit() in the virtio_vsock respectively in module_init and module_exit functions, that cannot be invoked until there are open sockets.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1609699

---
 net/vmw_vsock/virtio_transport.c | 26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)
net/vmw_vsock/virtio_transport.c +18 -8
index 936d7eee62d03..6cbc08d82e7fd 100644
@@ -71,6 +71,9 @@ static u32 virtio_transport_get_local_cid(void)
 {
 	struct virtio_vsock *vsock = virtio_vsock_get();
 
+	if (!vsock)
+		return VMADDR_CID_ANY;
+
 	return vsock->guest_cid;
 }
 
@@ -495,10 +498,6 @@ static int virtio_vsock_probe(struct virtio_device *vdev)
 
 	virtio_vsock_update_guest_cid(vsock);
 
-	ret = vsock_core_init(&virtio_transport.transport);
-	if (ret < 0)
-		goto out_vqs;
-
 	vsock->rx_buf_nr = 0;
 	vsock->rx_buf_max_nr = 0;
 	atomic_set(&vsock->queued_replies, 0);
@@ -526,8 +525,6 @@ static int virtio_vsock_probe(struct virtio_device *vdev)
 	mutex_unlock(&the_virtio_vsock_mutex);
 	return 0;
 
-out_vqs:
-	vsock->vdev->config->del_vqs(vsock->vdev);
 out:
 	kfree(vsock);
 	mutex_unlock(&the_virtio_vsock_mutex);
@@ -567,7 +564,6 @@ static void virtio_vsock_remove(struct virtio_device *vdev)
 
 	mutex_lock(&the_virtio_vsock_mutex);
 	the_virtio_vsock = NULL;
-	vsock_core_exit();
 	mutex_unlock(&the_virtio_vsock_mutex);
 
 	vdev->config->del_vqs(vdev);
@@ -600,14 +596,28 @@ static int __init virtio_vsock_init(void)
 	virtio_vsock_workqueue = alloc_workqueue("virtio_vsock", 0, 0);
 	if (!virtio_vsock_workqueue)
 		return -ENOMEM;
+
 	ret = register_virtio_driver(&virtio_vsock_driver);
 	if (ret)
-		destroy_workqueue(virtio_vsock_workqueue);
+		goto out_wq;
+
+	ret = vsock_core_init(&virtio_transport.transport);
+	if (ret)
+		goto out_vdr;
+
+	return 0;
+
+out_vdr:
+	unregister_virtio_driver(&virtio_vsock_driver);
+out_wq:
+	destroy_workqueue(virtio_vsock_workqueue);
 	return ret;
+
 }
 
 static void __exit virtio_vsock_exit(void)
 {
+	vsock_core_exit();
 	unregister_virtio_driver(&virtio_vsock_driver);
 	destroy_workqueue(virtio_vsock_workqueue);
 }
Signature · 1 line
2.19.1
author maintainer
#8 lore raw

PATCH 9/19 vsock/virtio: reset connected sockets on device removal

In reply to Sasha Levin

From: Stefano Garzarella <[email protected]>

[ Upstream commit 85965487abc540368393a15491e6e7fcd230039d ]

When the virtio transport device disappear, we should reset all connected sockets in order to inform the users.

---
 net/vmw_vsock/virtio_transport.c | 3 +++
 1 file changed, 3 insertions(+)
net/vmw_vsock/virtio_transport.c +3 -0
index 6cbc08d82e7fd..f66a6010ae075 100644
@@ -541,6 +541,9 @@ static void virtio_vsock_remove(struct virtio_device *vdev)
 	flush_work(&vsock->event_work);
 	flush_work(&vsock->send_pkt_work);
 
+	/* Reset all connected sockets when the device disappear */
+	vsock_for_each_connected_socket(virtio_vsock_reset_sock);
+
 	vdev->config->reset(vdev);
 
 	mutex_lock(&vsock->rx_lock);
Signature · 1 line
2.19.1
author maintainer
#10 lore raw

PATCH 11/19 selftests: netfilter: fix config fragment CONFIG_NF_TABLES_INET

In reply to Sasha Levin

From: Naresh Kamboju <[email protected]>

[ Upstream commit 952b72f89ae23b316da8c1021b18d0c388ad6cc4 ]

In selftests the config fragment for netfilter was added as NF_TABLES_INET=y and this patch correct it as CONFIG_NF_TABLES_INET=y

Signed-off-by Naresh Kamboju <naresh.kamboju at linaro.org>
Acked-by Florian Westphal <fw at strlen.de>
Signed-off-by Pablo Neira Ayuso <pablo at netfilter.org>
Signed-off-by Sasha Levin <sashal at kernel.org>
---
 tools/testing/selftests/netfilter/config | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/netfilter/config +1 -1
index 1017313e41a85..59caa8f71cd80 100644
@@ -1,2 +1,2 @@
 CONFIG_NET_NS=y
-NF_TABLES_INET=y
+CONFIG_NF_TABLES_INET=y
Signature · 1 line
2.19.1
author maintainer
#11 lore raw

PATCH 12/19 selftests: netfilter: add simple masq/redirect test cases

In reply to Sasha Levin

From: Florian Westphal <fw at strlen.de>

[ Upstream commit 98bfc3414bda335dbd7fec58bde6266f991801d7 ]

Check basic nat/redirect/masquerade for ipv4 and ipv6.

Signed-off-by Florian Westphal <fw at strlen.de>
Signed-off-by Pablo Neira Ayuso <pablo at netfilter.org>
Signed-off-by Sasha Levin <sashal at kernel.org>
---
 tools/testing/selftests/netfilter/Makefile   |   2 +-
 tools/testing/selftests/netfilter/nft_nat.sh | 762 +++++++++++++++++++
 2 files changed, 763 insertions(+), 1 deletion(-)
 create mode 100755 tools/testing/selftests/netfilter/nft_nat.sh
tools/testing/selftests/netfilter/Makefile +1 -1
index 47ed6cef93fb8..c9ff2b47bd1ca 100644
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 # Makefile for netfilter selftests
 
-TEST_PROGS := nft_trans_stress.sh
+TEST_PROGS := nft_trans_stress.sh nft_nat.sh
 
 include ../lib.mk
tools/testing/selftests/netfilter/nft_nat.sh new file +762 -0

762 lines not on this page · raw message

Signature · 1 line
2.19.1
author maintainer
#13 lore raw

PATCH 14/19 s390/qeth: fix use-after-free in error path

In reply to Sasha Levin

From: Julian Wiedmann <[email protected]>

[ Upstream commit afa0c5904ba16d59b0454f7ee4c807dae350f432 ]

The error path in qeth_alloc_qdio_buffers() that takes care of cleaning up the Output Queues is buggy. It first frees the queue, but then calls qeth_clear_outq_buffers() with that very queue struct.

Make the call to qeth_clear_outq_buffers() part of the free action (in the correct order), and while at it fix the naming of the helper.

Fixes 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks")
---
 drivers/s390/net/qeth_core_main.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)
drivers/s390/net/qeth_core_main.c +6 -9
index 8f77fc0630ce0..86a02592b982c 100644
@@ -2449,11 +2449,12 @@ static int qeth_init_qdio_out_buf(struct qeth_qdio_out_q *q, int bidx)
 	return rc;
 }
 
-static void qeth_free_qdio_out_buf(struct qeth_qdio_out_q *q)
+static void qeth_free_output_queue(struct qeth_qdio_out_q *q)
 {
 	if (!q)
 		return;
 
+	qeth_clear_outq_buffers(q, 1);
 	qdio_free_buffers(q->qdio_bufs, QDIO_MAX_BUFFERS_PER_Q);
 	kfree(q);
 }
@@ -2526,10 +2527,8 @@ static int qeth_alloc_qdio_buffers(struct qeth_card *card)
 		card->qdio.out_qs[i]->bufs[j] = NULL;
 	}
 out_freeoutq:
-	while (i > 0) {
-		qeth_free_qdio_out_buf(card->qdio.out_qs[--i]);
-		qeth_clear_outq_buffers(card->qdio.out_qs[i], 1);
-	}
+	while (i > 0)
+		qeth_free_output_queue(card->qdio.out_qs[--i]);
 	kfree(card->qdio.out_qs);
 	card->qdio.out_qs = NULL;
 out_freepool:
@@ -2562,10 +2561,8 @@ static void qeth_free_qdio_buffers(struct qeth_card *card)
 	qeth_free_buffer_pool(card);
 	/* free outbound qdio_qs */
 	if (card->qdio.out_qs) {
-		for (i = 0; i < card->qdio.no_out_queues; ++i) {
-			qeth_clear_outq_buffers(card->qdio.out_qs[i], 1);
-			qeth_free_qdio_out_buf(card->qdio.out_qs[i]);
-		}
+		for (i = 0; i < card->qdio.no_out_queues; i++)
+			qeth_free_output_queue(card->qdio.out_qs[i]);
 		kfree(card->qdio.out_qs);
 		card->qdio.out_qs = NULL;
 	}
Signature · 1 line
2.19.1

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/19 soc: fsl: qbman: avoid race in clearing QMan interrupt

From: Madalin Bucur <[email protected]>

[ Upstream commit 89857a8a5c89a406b967ab2be7bd2ccdbe75e73d ]

By clearing all interrupt sources, not only those that already occurred, the existing code may acknowledge by mistake interrupts that occurred after the code checks for them.

---
 drivers/soc/fsl/qbman/qman.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/soc/fsl/qbman/qman.c +5 -4
index 2cc82ed6433a0..91f5c951850f7 100644
@@ -1073,18 +1073,19 @@ static void qm_mr_process_task(struct work_struct *work);
 static irqreturn_t portal_isr(int irq, void *ptr)
 {
 	struct qman_portal *p = ptr;
-
-	u32 clear = QM_DQAVAIL_MASK | p->irq_sources;
 	u32 is = qm_in(&p->p, QM_REG_ISR) & p->irq_sources;
+	u32 clear = 0;
 
 	if (unlikely(!is))
 		return IRQ_NONE;
 
 	/* DQRR-handling if it's interrupt-driven */
-	if (is & QM_PIRQ_DQRI)
+	if (is & QM_PIRQ_DQRI) {
 		__poll_portal_fast(p, QMAN_POLL_LIMIT);
+		clear = QM_DQAVAIL_MASK | QM_PIRQ_DQRI;
+	}
 	/* Handling of anything else that's interrupt-driven */
-	clear |= __poll_portal_slow(p, is);
+	clear |= __poll_portal_slow(p, is) & QM_PIRQ_SLOW;
 	qm_out(&p->p, QM_REG_ISR, clear);
 	return IRQ_HANDLED;
 }
Signature · 7 lines
2.19.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author maintainer
#5 lore raw

PATCH 6/19 drm/sun4i: tcon: Prepare and enable TCON channel 0 clock at init

From: Paul Kocialkowski <[email protected]>

[ Upstream commit b14e945bda8ae227d1bf2b1837c0c4a61721cd1a ]

When initializing clocks, a reference to the TCON channel 0 clock is obtained. However, the clock is never prepared and enabled later. Switching from simplefb to DRM actually disables the clock (that was usually configured by U-Boot) because of that.

On the V3s, this results in a hang when writing to some mixer registers when switching over to DRM from simplefb.

Fix this by preparing and enabling the clock when initializing other clocks. Waiting for sun4i_tcon_channel_enable to enable the clock is apparently too late and results in the same mixer register access hang.

---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/gpu/drm/sun4i/sun4i_tcon.c +2 -0
index f2975a1525bee..2796fea70a427 100644
@@ -327,6 +327,7 @@ static int sun4i_tcon_init_clocks(struct device *dev,
 		dev_err(dev, "Couldn't get the TCON channel 0 clock\n");
 		return PTR_ERR(tcon->sclk0);
 	}
+	clk_prepare_enable(tcon->sclk0);
 
 	if (tcon->quirks->has_channel_1) {
 		tcon->sclk1 = devm_clk_get(dev, "tcon-ch1");
@@ -341,6 +342,7 @@ static int sun4i_tcon_init_clocks(struct device *dev,
 
 static void sun4i_tcon_free_clocks(struct sun4i_tcon *tcon)
 {
+	clk_disable_unprepare(tcon->sclk0);
 	clk_disable_unprepare(tcon->clk);
 }
 
Signature · 6 lines
2.19.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#4 lore raw

PATCH 5/19 irqchip/mmp: Only touch the PJ4 IRQ & FIQ bits on enable/disable

In reply to Sasha Levin

From: Lubomir Rintel <[email protected]>

[ Upstream commit 2380a22b60ce6f995eac806e69c66e397b59d045 ]

Resetting bit 4 disables the interrupt delivery to the "secure processor" core. This breaks the keyboard on a OLPC XO 1.75 laptop, where the firmware running on the "secure processor" bit-bangs the PS/2 protocol over the GPIO lines.

It is not clear what the rest of the bits are and Marvell was unhelpful when asked for documentation. Aside from the SP bit, there are probably priority bits.

Leaving the unknown bits as the firmware set them up seems to be a wiser course of action compared to just turning them off.

[maz: fixed-up subject and commit message]
---
 drivers/irqchip/irq-mmp.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/irqchip/irq-mmp.c +5 -1
index 013fc9659a842..2fe2bcb63a711 100644
@@ -34,6 +34,9 @@
 #define SEL_INT_PENDING		(1 << 6)
 #define SEL_INT_NUM_MASK	0x3f
 
+#define MMP2_ICU_INT_ROUTE_PJ4_IRQ	(1 << 5)
+#define MMP2_ICU_INT_ROUTE_PJ4_FIQ	(1 << 6)
+
 struct icu_chip_data {
 	int			nr_irqs;
 	unsigned int		virq_base;
@@ -190,7 +193,8 @@ static struct mmp_intc_conf mmp_conf = {
 static struct mmp_intc_conf mmp2_conf = {
 	.conf_enable	= 0x20,
 	.conf_disable	= 0x0,
-	.conf_mask	= 0x7f,
+	.conf_mask	= MMP2_ICU_INT_ROUTE_PJ4_IRQ |
+			  MMP2_ICU_INT_ROUTE_PJ4_FIQ,
 };
 
 static void __exception_irq_entry mmp_handle_irq(struct pt_regs *regs)
Signature · 1 line
2.19.1
author maintainer
#9 lore raw

PATCH 10/19 dmaengine: dmatest: Abort test in case of mapping error

In reply to Sasha Levin

From: Andy Shevchenko <[email protected]>

[ Upstream commit 6454368a804c4955ccd116236037536f81e5b1f1 ]

In case of mapping error the DMA addresses are invalid and continuing will screw system memory or potentially something else.

[  222.480310] dmatest: dma0chan7-copy0: summary 1 tests, 3 failures 6 iops 349 KB/s (0)
...
[  240.912725] check: Corrupted low memory at 00000000c7c75ac9 (2940 phys) = 5656000000000000
[  240.921998] check: Corrupted low memory at 000000005715a1cd (2948 phys) = 279f2aca5595ab2b
[  240.931280] check: Corrupted low memory at 000000002f4024c0 (2950 phys) = 5e5624f349e793cf

...

Abort any test if mapping failed.

Fixes 4076e755dbec ("dmatest: convert to dmaengine_unmap_data")
Cc Dan Williams <[email protected]>
---
 drivers/dma/dmatest.c | 28 ++++++++++++----------------
 1 file changed, 12 insertions(+), 16 deletions(-)
drivers/dma/dmatest.c +12 -16
index ebe72a4665875..7dd46cf5ed845 100644
@@ -583,11 +583,9 @@ static int dmatest_func(void *data)
 			srcs[i] = um->addr[i] + src_off;
 			ret = dma_mapping_error(dev->dev, um->addr[i]);
 			if (ret) {
-				dmaengine_unmap_put(um);
 				result("src mapping error", total_tests,
 				       src_off, dst_off, len, ret);
-				failed_tests++;
-				continue;
+				goto error_unmap_continue;
 			}
 			um->to_cnt++;
 		}
@@ -602,11 +600,9 @@ static int dmatest_func(void *data)
 					       DMA_BIDIRECTIONAL);
 			ret = dma_mapping_error(dev->dev, dsts[i]);
 			if (ret) {
-				dmaengine_unmap_put(um);
 				result("dst mapping error", total_tests,
 				       src_off, dst_off, len, ret);
-				failed_tests++;
-				continue;
+				goto error_unmap_continue;
 			}
 			um->bidi_cnt++;
 		}
@@ -643,12 +639,10 @@ static int dmatest_func(void *data)
 		}
 
 		if (!tx) {
-			dmaengine_unmap_put(um);
 			result("prep error", total_tests, src_off,
 			       dst_off, len, ret);
 			msleep(100);
-			failed_tests++;
-			continue;
+			goto error_unmap_continue;
 		}
 
 		done->done = false;
@@ -657,12 +651,10 @@ static int dmatest_func(void *data)
 		cookie = tx->tx_submit(tx);
 
 		if (dma_submit_error(cookie)) {
-			dmaengine_unmap_put(um);
 			result("submit error", total_tests, src_off,
 			       dst_off, len, ret);
 			msleep(100);
-			failed_tests++;
-			continue;
+			goto error_unmap_continue;
 		}
 		dma_async_issue_pending(chan);
 
@@ -675,16 +667,14 @@ static int dmatest_func(void *data)
 			dmaengine_unmap_put(um);
 			result("test timed out", total_tests, src_off, dst_off,
 			       len, 0);
-			failed_tests++;
-			continue;
+			goto error_unmap_continue;
 		} else if (status != DMA_COMPLETE) {
 			dmaengine_unmap_put(um);
 			result(status == DMA_ERROR ?
 			       "completion error status" :
 			       "completion busy status", total_tests, src_off,
 			       dst_off, len, ret);
-			failed_tests++;
-			continue;
+			goto error_unmap_continue;
 		}
 
 		dmaengine_unmap_put(um);
@@ -727,6 +717,12 @@ static int dmatest_func(void *data)
 			verbose_result("test passed", total_tests, src_off,
 				       dst_off, len, 0);
 		}
+
+		continue;
+
+error_unmap_continue:
+		dmaengine_unmap_put(um);
+		failed_tests++;
 	}
 	ktime = ktime_sub(ktime_get(), ktime);
 	ktime = ktime_sub(ktime, comparetime);
Signature · 1 line
2.19.1
author maintainer
#6 lore raw

PATCH 7/19 dmaengine: at_xdmac: Fix wrongfull report of a channel as in use

In reply to Sasha Levin

From: Codrin Ciubotariu <[email protected]>

[ Upstream commit dc3f595b6617ebc0307e0ce151e8f2f2b2489b95 ]

atchan->status variable is used to store two different information:
- pass channel interrupts status from interrupt handler to tasklet;
- channel information like whether it is cyclic or paused;

This causes a bug when device_terminate_all() is called, (AT_XDMAC_CHAN_IS_CYCLIC cleared on atchan->status) and then a late End of Block interrupt arrives (AT_XDMAC_CIS_BIS), which sets bit 0 of atchan->status. Bit 0 is also used for AT_XDMAC_CHAN_IS_CYCLIC, so when a new descriptor for a cyclic transfer is created, the driver reports the channel as in use:

if (test_and_set_bit(AT_XDMAC_CHAN_IS_CYCLIC, &atchan->status)) {
	dev_err(chan2dev(chan), "channel currently used\n");
	return NULL;
}

This patch fixes the bug by adding a different struct member to keep the interrupts status separated from the channel status bits.

Fixes e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
---
 drivers/dma/at_xdmac.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)
drivers/dma/at_xdmac.c +10 -9
index ee7b48d5243cf..b222dd7afe8e2 100644
@@ -203,6 +203,7 @@ struct at_xdmac_chan {
 	u32				save_cim;
 	u32				save_cnda;
 	u32				save_cndc;
+	u32				irq_status;
 	unsigned long			status;
 	struct tasklet_struct		tasklet;
 	struct dma_slave_config		sconfig;
@@ -1582,8 +1583,8 @@ static void at_xdmac_tasklet(unsigned long data)
 	struct at_xdmac_desc	*desc;
 	u32			error_mask;
 
-	dev_dbg(chan2dev(&atchan->chan), "%s: status=0x%08lx\n",
-		 __func__, atchan->status);
+	dev_dbg(chan2dev(&atchan->chan), "%s: status=0x%08x\n",
+		__func__, atchan->irq_status);
 
 	error_mask = AT_XDMAC_CIS_RBEIS
 		     | AT_XDMAC_CIS_WBEIS
@@ -1591,15 +1592,15 @@ static void at_xdmac_tasklet(unsigned long data)
 
 	if (at_xdmac_chan_is_cyclic(atchan)) {
 		at_xdmac_handle_cyclic(atchan);
-	} else if ((atchan->status & AT_XDMAC_CIS_LIS)
-		   || (atchan->status & error_mask)) {
+	} else if ((atchan->irq_status & AT_XDMAC_CIS_LIS)
+		   || (atchan->irq_status & error_mask)) {
 		struct dma_async_tx_descriptor  *txd;
 
-		if (atchan->status & AT_XDMAC_CIS_RBEIS)
+		if (atchan->irq_status & AT_XDMAC_CIS_RBEIS)
 			dev_err(chan2dev(&atchan->chan), "read bus error!!!");
-		if (atchan->status & AT_XDMAC_CIS_WBEIS)
+		if (atchan->irq_status & AT_XDMAC_CIS_WBEIS)
 			dev_err(chan2dev(&atchan->chan), "write bus error!!!");
-		if (atchan->status & AT_XDMAC_CIS_ROIS)
+		if (atchan->irq_status & AT_XDMAC_CIS_ROIS)
 			dev_err(chan2dev(&atchan->chan), "request overflow error!!!");
 
 		spin_lock_bh(&atchan->lock);
@@ -1654,7 +1655,7 @@ static irqreturn_t at_xdmac_interrupt(int irq, void *dev_id)
 			atchan = &atxdmac->chan[i];
 			chan_imr = at_xdmac_chan_read(atchan, AT_XDMAC_CIM);
 			chan_status = at_xdmac_chan_read(atchan, AT_XDMAC_CIS);
-			atchan->status = chan_status & chan_imr;
+			atchan->irq_status = chan_status & chan_imr;
 			dev_vdbg(atxdmac->dma.dev,
 				 "%s: chan%d: imr=0x%x, status=0x%x\n",
 				 __func__, i, chan_imr, chan_status);
@@ -1668,7 +1669,7 @@ static irqreturn_t at_xdmac_interrupt(int irq, void *dev_id)
 				 at_xdmac_chan_read(atchan, AT_XDMAC_CDA),
 				 at_xdmac_chan_read(atchan, AT_XDMAC_CUBC));
 
-			if (atchan->status & (AT_XDMAC_CIS_RBEIS | AT_XDMAC_CIS_WBEIS))
+			if (atchan->irq_status & (AT_XDMAC_CIS_RBEIS | AT_XDMAC_CIS_WBEIS))
 				at_xdmac_write(atxdmac, AT_XDMAC_GD, atchan->mask);
 
 			tasklet_schedule(&atchan->tasklet);
Signature · 7 lines
2.19.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author maintainer
#14 lore raw

PATCH 15/19 perf symbols: Filter out hidden symbols from labels

In reply to Sasha Levin

From: Jiri Olsa <[email protected]>

[ Upstream commit 59a17706915fe5ea6f711e1f92d4fb706bce07fe ]

When perf is built with the annobin plugin (RHEL8 build) extra symbols are added to its binary:

  # nm perf | grep annobin | head -10
  0000000000241100 t .annobin_annotate.c
  0000000000326490 t .annobin_annotate.c
  0000000000249255 t .annobin_annotate.c_end
  00000000003283a8 t .annobin_annotate.c_end
  00000000001bce18 t .annobin_annotate.c_end.hot
  00000000001bce18 t .annobin_annotate.c_end.hot
  00000000001bc3e2 t .annobin_annotate.c_end.unlikely
  00000000001bc400 t .annobin_annotate.c_end.unlikely
  00000000001bce18 t .annobin_annotate.c.hot
  00000000001bce18 t .annobin_annotate.c.hot
  ...

Those symbols have no use for report or annotation and should be skipped. Moreover they interfere with the DWARF unwind test on the PPC arch, where they are mixed with checked symbols and then the test fails:

  # perf test dwarf -v
  59: Test dwarf unwind                                     :
  --- start ---
  test child forked, pid 8515
  unwind: .annobin_dwarf_unwind.c:ip = 0x10dba40dc (0x2740dc)
  ...
  got: .annobin_dwarf_unwind.c 0x10dba40dc, expecting test__arch_unwind_sample
  unwind: failed with 'no error'

The annobin symbols are defined as NOTYPE/LOCAL/HIDDEN:

  # readelf -s ./perf | grep annobin | head -1
    40: 00000000001bce4f     0 NOTYPE  LOCAL  HIDDEN    13 .annobin_init.c

They can still pass the check for the label symbol. Adding check for HIDDEN and INTERNAL (as suggested by Nick below) visibility and filter out such symbols.

Quoted 4 lines

Just to be awkward, if you are going to ignore STV_HIDDEN symbols then you should probably also ignore STV_INTERNAL ones as well... Annobin does not generate them, but you never know, one day some other tool might create some.

---
 tools/perf/util/symbol-elf.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
tools/perf/util/symbol-elf.c +8 -1
index adbc6c02c3aaa..20ba5a9aeae40 100644
@@ -85,6 +85,11 @@ static inline uint8_t elf_sym__type(const GElf_Sym *sym)
 	return GELF_ST_TYPE(sym->st_info);
 }
 
+static inline uint8_t elf_sym__visibility(const GElf_Sym *sym)
+{
+	return GELF_ST_VISIBILITY(sym->st_other);
+}
+
 #ifndef STT_GNU_IFUNC
 #define STT_GNU_IFUNC 10
 #endif
@@ -109,7 +114,9 @@ static inline int elf_sym__is_label(const GElf_Sym *sym)
 	return elf_sym__type(sym) == STT_NOTYPE &&
 		sym->st_name != 0 &&
 		sym->st_shndx != SHN_UNDEF &&
-		sym->st_shndx != SHN_ABS;
+		sym->st_shndx != SHN_ABS &&
+		elf_sym__visibility(sym) != STV_HIDDEN &&
+		elf_sym__visibility(sym) != STV_INTERNAL;
 }
 
 static bool elf_sym__is_a(GElf_Sym *sym, enum map_type type)
Signature · 1 line
2.19.1
author maintainer
#12 lore raw

PATCH 13/19 netfilter: nf_nat: skip nat clash resolution for same-origin entries

In reply to Sasha Levin

From: Martynas Pumputis <[email protected]>

[ Upstream commit 4e35c1cb9460240e983a01745b5f29fe3a4d8e39 ]

It is possible that two concurrent packets originating from the same socket of a connection-less protocol (e.g. UDP) can end up having different IP_CT_DIR_REPLY tuples which results in one of the packets being dropped.

To illustrate this, consider the following simplified scenario:

1. Packet A and B are sent at the same time from two different threads by same UDP socket. No matching conntrack entry exists yet. Both packets cause allocation of a new conntrack entry.
2. get_unique_tuple gets called for A. No clashing entry found. conntrack entry for A is added to main conntrack table.
3. get_unique_tuple is called for B and will find that the reply tuple of B is already taken by A.
It will allocate a new UDP source port for B to resolve the clash.
4. conntrack entry for B cannot be added to main conntrack table because its ORIGINAL direction is clashing with A and the REPLY directions of A and B are not the same anymore due to UDP source port reallocation done in step 3.

This patch modifies nf_conntrack_tuple_taken so it doesn't consider colliding reply tuples if the IP_CT_DIR_ORIGINAL tuples are equal.

[ Florian: simplify patch to not use .allow_clash setting
and always ignore identical flows ]

---
 net/netfilter/nf_conntrack_core.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
net/netfilter/nf_conntrack_core.c +16 -0
index 19b3f4fbea520..df1d5618b008f 100644
@@ -855,6 +855,22 @@ nf_conntrack_tuple_taken(const struct nf_conntrack_tuple *tuple,
 		}
 
 		if (nf_ct_key_equal(h, tuple, zone, net)) {
+			/* Tuple is taken already, so caller will need to find
+			 * a new source port to use.
+			 *
+			 * Only exception:
+			 * If the *original tuples* are identical, then both
+			 * conntracks refer to the same flow.
+			 * This is a rare situation, it can occur e.g. when
+			 * more than one UDP packet is sent from same socket
+			 * in different threads.
+			 *
+			 * Let nf_ct_resolve_clash() deal with this later.
+			 */
+			if (nf_ct_tuple_equal(&ignored_conntrack->tuplehash[IP_CT_DIR_ORIGINAL].tuple,
+					      &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple))
+				continue;
+
 			NF_CT_STAT_INC_ATOMIC(net, found);
 			rcu_read_unlock();
 			return 1;
Signature · 1 line
2.19.1
author maintainer
#17 lore raw

PATCH 18/19 MIPS: Remove function size check in get_frame_info()

In reply to Sasha Levin

From: Jun-Ru Chang <[email protected]>

[ Upstream commit 2b424cfc69728224fcb5fad138ea7260728e0901 ]

Patch (b6c7a324df37b "MIPS: Fix get_frame_info() handling of microMIPS function size.") introduces additional function size check for microMIPS by only checking insn between ip and ip + func_size. However, func_size in get_frame_info() is always 0 if KALLSYMS is not enabled. This causes get_frame_info() to return immediately without calculating correct frame_size, which in turn causes "Can't analyze schedule() prologue" warning messages at boot time.

This patch removes func_size check, and let the frame_size check run up to 128 insns for both MIPS and microMIPS.

Fixes b6c7a324df37b ("MIPS: Fix get_frame_info() handling of microMIPS function size.")
---
 arch/mips/kernel/process.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
arch/mips/kernel/process.c +3 -4
index 1cc133e7026fd..fffd031dc6b61 100644
@@ -344,7 +344,7 @@ static inline int is_sp_move_ins(union mips_instruction *ip)
 static int get_frame_info(struct mips_frame_info *info)
 {
 	bool is_mmips = IS_ENABLED(CONFIG_CPU_MICROMIPS);
-	union mips_instruction insn, *ip, *ip_end;
+	union mips_instruction insn, *ip;
 	const unsigned int max_insns = 128;
 	unsigned int last_insn_size = 0;
 	unsigned int i;
@@ -356,10 +356,9 @@ static int get_frame_info(struct mips_frame_info *info)
 	if (!ip)
 		goto err;
 
-	ip_end = (void *)ip + info->func_size;
-
-	for (i = 0; i < max_insns && ip < ip_end; i++) {
+	for (i = 0; i < max_insns; i++) {
 		ip = (void *)ip + last_insn_size;
+
 		if (is_mmips && mm_insn_16bit(ip->halfword[0])) {
 			insn.halfword[0] = 0;
 			insn.halfword[1] = ip->halfword[0];
Signature · 1 line
2.19.1
author maintainer
#16 lore raw

PATCH 17/19 MIPS: Loongson: Introduce and use loongson_llsc_mb()

In reply to Sasha Levin

From: Huacai Chen <[email protected]>

[ Upstream commit e02e07e3127d8aec1f4bcdfb2fc52a2d99b4859e ]

On the Loongson-2G/2H/3A/3B there is a hardware flaw that ll/sc and lld/scd is very weak ordering. We should add sync instructions "before each ll/lld" and "at the branch-target between ll/sc" to workaround. Otherwise, this flaw will cause deadlock occasionally (e.g. when doing heavy load test with LTP).

Below is the explaination of CPU designer:

"For Loongson 3 family, when a memory access instruction (load, store, or prefetch)'s executing occurs between the execution of LL and SC, the success or failure of SC is not predictable. Although programmer would not insert memory access instructions between LL and SC, the memory instructions before LL in program-order, may dynamically executed between the execution of LL/SC, so a memory fence (SYNC) is needed before LL/LLD to avoid this situation.

Since Loongson-3A R2 (3A2000), we have improved our hardware design to handle this case. But we later deduce a rarely circumstance that some speculatively executed memory instructions due to branch misprediction between LL/SC still fall into the above case, so a memory fence (SYNC) at branch-target (if its target is not between LL/SC) is needed for Loongson 3A1000, 3B1500, 3A2000 and 3A3000.

Our processor is continually evolving and we aim to to remove all these workaround-SYNCs around LL/SC for new-come processor."

Here is an example:

Both cpu1 and cpu2 simutaneously run atomic_add by 1 on same atomic var, this bug cause both 'sc' run by two cpus (in atomic_add) succeed at same time('sc' return 1), and the variable is only *added by 1*, sometimes, which is wrong and unacceptable(it should be added by 2).

Why disable fix-loongson3-llsc in compiler?
Because compiler fix will cause problems in kernel's __ex_table section.

This patch fix all the cases in kernel, but:

+. the fix at the end of futex_atomic_cmpxchg_inatomic is for branch-target of 'bne', there other cases which smp_mb__before_llsc() and smp_llsc_mb() fix the ll and branch-target coincidently such as atomic_sub_if_positive/ cmpxchg/xchg, just like this one.

+. Loongson 3 does support CONFIG_EDAC_ATOMIC_SCRUB, so no need to touch edac.h

+. local_ops and cmpxchg_local should not be affected by this bug since only the owner can write.

+. mips_atomic_set for syscall.c is deprecated and rarely used, just let it go

[[email protected]:
- Simplify the addition of -mno-fix-loongson3-llsc to cflags, and add a comment describing why it's there.
- Make loongson_llsc_mb() a no-op when CONFIG_CPU_LOONGSON3_WORKAROUNDS=n, rather than a compiler memory barrier.
- Add a comment describing the bug & how loongson_llsc_mb() helps in asm/barrier.h.]

Cc Ralf Baechle <[email protected]>
Cc Steven J . Hill <[email protected]>
Cc Fuxin Zhang <[email protected]>
Cc Zhangjin Wu <[email protected]>
Cc Li Xuefeng <[email protected]>
Cc Xu Chenghua <[email protected]>
---
 arch/mips/Kconfig               | 15 ++++++++++++++
 arch/mips/include/asm/atomic.h  |  6 ++++++
 arch/mips/include/asm/barrier.h | 36 +++++++++++++++++++++++++++++++++
 arch/mips/include/asm/bitops.h  |  5 +++++
 arch/mips/include/asm/futex.h   |  3 +++
 arch/mips/include/asm/pgtable.h |  2 ++
 arch/mips/loongson64/Platform   | 23 +++++++++++++++++++++
 arch/mips/mm/tlbex.c            | 10 +++++++++
 8 files changed, 100 insertions(+)
arch/mips/Kconfig +15 -0
index bb9940c6927e7..47662626a375f 100644
@@ -1396,6 +1396,21 @@ config LOONGSON3_ENHANCEMENT
 	  please say 'N' here. If you want a high-performance kernel to run on
 	  new Loongson 3 machines only, please say 'Y' here.
 
+config CPU_LOONGSON3_WORKAROUNDS
+	bool "Old Loongson 3 LLSC Workarounds"
+	default y if SMP
+	depends on CPU_LOONGSON3
+	help
+	  Loongson 3 processors have the llsc issues which require workarounds.
+	  Without workarounds the system may hang unexpectedly.
+
+	  Newer Loongson 3 will fix these issues and no workarounds are needed.
+	  The workarounds have no significant side effect on them but may
+	  decrease the performance of the system so this option should be
+	  disabled unless the kernel is intended to be run on old systems.
+
+	  If unsure, please say Y.
+
 config CPU_LOONGSON2E
 	bool "Loongson 2E"
 	depends on SYS_HAS_CPU_LOONGSON2E
arch/mips/include/asm/atomic.h +6 -0
index 0ab176bdb8e81..8ee17565bc781 100644
@@ -47,6 +47,7 @@ static __inline__ void atomic_##op(int i, atomic_t * v)			      \
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {			      \
 		int temp;						      \
 									      \
+		loongson_llsc_mb();					      \
 		__asm__ __volatile__(					      \
 		"	.set	arch=r4000				\n"   \
 		"1:	ll	%0, %1		# atomic_" #op "	\n"   \
@@ -86,6 +87,7 @@ static __inline__ int atomic_##op##_return_relaxed(int i, atomic_t * v)	      \
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {			      \
 		int temp;						      \
 									      \
+		loongson_llsc_mb();					      \
 		__asm__ __volatile__(					      \
 		"	.set	arch=r4000				\n"   \
 		"1:	ll	%1, %2		# atomic_" #op "_return	\n"   \
@@ -134,6 +136,7 @@ static __inline__ int atomic_fetch_##op##_relaxed(int i, atomic_t * v)	      \
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {			      \
 		int temp;						      \
 									      \
+		loongson_llsc_mb();					      \
 		__asm__ __volatile__(					      \
 		"	.set	arch=r4000				\n"   \
 		"1:	ll	%1, %2		# atomic_fetch_" #op "	\n"   \
@@ -389,6 +392,7 @@ static __inline__ void atomic64_##op(long i, atomic64_t * v)		      \
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {			      \
 		long temp;						      \
 									      \
+		loongson_llsc_mb();					      \
 		__asm__ __volatile__(					      \
 		"	.set	arch=r4000				\n"   \
 		"1:	lld	%0, %1		# atomic64_" #op "	\n"   \
@@ -428,6 +432,7 @@ static __inline__ long atomic64_##op##_return_relaxed(long i, atomic64_t * v) \
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {			      \
 		long temp;						      \
 									      \
+		loongson_llsc_mb();					      \
 		__asm__ __volatile__(					      \
 		"	.set	arch=r4000				\n"   \
 		"1:	lld	%1, %2		# atomic64_" #op "_return\n"  \
@@ -477,6 +482,7 @@ static __inline__ long atomic64_fetch_##op##_relaxed(long i, atomic64_t * v)  \
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {			      \
 		long temp;						      \
 									      \
+		loongson_llsc_mb();					      \
 		__asm__ __volatile__(					      \
 		"	.set	arch=r4000				\n"   \
 		"1:	lld	%1, %2		# atomic64_fetch_" #op "\n"   \
arch/mips/include/asm/barrier.h +36 -0
index a5eb1bb199a7f..b7f6ac5e513c9 100644
@@ -222,6 +222,42 @@
 #define __smp_mb__before_atomic()	__smp_mb__before_llsc()
 #define __smp_mb__after_atomic()	smp_llsc_mb()
 
+/*
+ * Some Loongson 3 CPUs have a bug wherein execution of a memory access (load,
+ * store or pref) in between an ll & sc can cause the sc instruction to
+ * erroneously succeed, breaking atomicity. Whilst it's unusual to write code
+ * containing such sequences, this bug bites harder than we might otherwise
+ * expect due to reordering & speculation:
+ *
+ * 1) A memory access appearing prior to the ll in program order may actually
+ *    be executed after the ll - this is the reordering case.
+ *
+ *    In order to avoid this we need to place a memory barrier (ie. a sync
+ *    instruction) prior to every ll instruction, in between it & any earlier
+ *    memory access instructions. Many of these cases are already covered by
+ *    smp_mb__before_llsc() but for the remaining cases, typically ones in
+ *    which multiple CPUs may operate on a memory location but ordering is not
+ *    usually guaranteed, we use loongson_llsc_mb() below.
+ *
+ *    This reordering case is fixed by 3A R2 CPUs, ie. 3A2000 models and later.
+ *
+ * 2) If a conditional branch exists between an ll & sc with a target outside
+ *    of the ll-sc loop, for example an exit upon value mismatch in cmpxchg()
+ *    or similar, then misprediction of the branch may allow speculative
+ *    execution of memory accesses from outside of the ll-sc loop.
+ *
+ *    In order to avoid this we need a memory barrier (ie. a sync instruction)
+ *    at each affected branch target, for which we also use loongson_llsc_mb()
+ *    defined below.
+ *
+ *    This case affects all current Loongson 3 CPUs.
+ */
+#ifdef CONFIG_CPU_LOONGSON3_WORKAROUNDS /* Loongson-3's LLSC workaround */
+#define loongson_llsc_mb()	__asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
+#else
+#define loongson_llsc_mb()	do { } while (0)
+#endif
+
 #include <asm-generic/barrier.h>
 
 #endif /* __ASM_BARRIER_H */
arch/mips/include/asm/bitops.h +5 -0
index fa57cef12a466..38a162d11b7b8 100644
@@ -68,6 +68,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 		: "ir" (1UL << bit), GCC_OFF_SMALL_ASM() (*m));
 #if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
 	} else if (kernel_uses_llsc && __builtin_constant_p(bit)) {
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	" __LL "%0, %1		# set_bit	\n"
@@ -78,6 +79,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 		} while (unlikely(!temp));
 #endif /* CONFIG_CPU_MIPSR2 || CONFIG_CPU_MIPSR6 */
 	} else if (kernel_uses_llsc) {
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
@@ -120,6 +122,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 		: "ir" (~(1UL << bit)));
 #if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
 	} else if (kernel_uses_llsc && __builtin_constant_p(bit)) {
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	" __LL "%0, %1		# clear_bit	\n"
@@ -130,6 +133,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 		} while (unlikely(!temp));
 #endif /* CONFIG_CPU_MIPSR2 || CONFIG_CPU_MIPSR6 */
 	} else if (kernel_uses_llsc) {
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
@@ -188,6 +192,7 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
arch/mips/include/asm/futex.h +3 -0
index a9e61ea54ca96..0a62a91b592d6 100644
@@ -50,6 +50,7 @@
 		  "i" (-EFAULT)						\
 		: "memory");						\
 	} else if (cpu_has_llsc) {					\
+		loongson_llsc_mb();					\
 		__asm__ __volatile__(					\
 		"	.set	push				\n"	\
 		"	.set	noat				\n"	\
@@ -162,6 +163,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		  "i" (-EFAULT)
 		: "memory");
 	} else if (cpu_has_llsc) {
+		loongson_llsc_mb();
 		__asm__ __volatile__(
 		"# futex_atomic_cmpxchg_inatomic			\n"
 		"	.set	push					\n"
@@ -190,6 +192,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		: GCC_OFF_SMALL_ASM() (*uaddr), "Jr" (oldval), "Jr" (newval),
 		  "i" (-EFAULT)
 		: "memory");
+		loongson_llsc_mb();
 	} else
 		return -ENOSYS;
 
arch/mips/include/asm/pgtable.h +2 -0
index 9e9e94415d08f..aab7b382a0623 100644
@@ -229,6 +229,7 @@ static inline void set_pte(pte_t *ptep, pte_t pteval)
 			: [buddy] "+m" (buddy->pte), [tmp] "=&r" (tmp)
 			: [global] "r" (page_global));
 		} else if (kernel_uses_llsc) {
+			loongson_llsc_mb();
 			__asm__ __volatile__ (
 			"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
 			"	.set	push				\n"
@@ -244,6 +245,7 @@ static inline void set_pte(pte_t *ptep, pte_t pteval)
 			"	.set	mips0				\n"
 			: [buddy] "+m" (buddy->pte), [tmp] "=&r" (tmp)
 			: [global] "r" (page_global));
+			loongson_llsc_mb();
 		}
 #else /* !CONFIG_SMP */
 		if (pte_none(*buddy))
arch/mips/loongson64/Platform +23 -0
index 0fce4608aa886..c1a4d4dc46655 100644
@@ -23,6 +23,29 @@ ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
 endif
 
 cflags-$(CONFIG_CPU_LOONGSON3)	+= -Wa,--trap
+
+#
+# Some versions of binutils, not currently mainline as of 2019/02/04, support
+# an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction
+# to work around a CPU bug (see loongson_llsc_mb() in asm/barrier.h for a
+# description).
+#
+# We disable this in order to prevent the assembler meddling with the
+# instruction that labels refer to, ie. if we label an ll instruction:
+#
+# 1: ll v0, 0(a0)
+#
+# ...then with the assembler fix applied the label may actually point at a sync
+# instruction inserted by the assembler, and if we were using the label in an
+# exception table the table would no longer contain the address of the ll
+# instruction.
+#
+# Avoid this by explicitly disabling that assembler behaviour. If upstream
+# binutils does not merge support for the flag then we can revisit & remove
+# this later - for now it ensures vendor toolchains don't cause problems.
+#
+cflags-$(CONFIG_CPU_LOONGSON3)	+= $(call as-option,-Wa$(comma)-mno-fix-loongson3-llsc,)
+
 #
 # binutils from v2.25 on and gcc starting from v4.9.0 treat -march=loongson3a
 # as MIPS64 R2; older versions as just R1.  This leaves the possibility open
arch/mips/mm/tlbex.c +10 -0
index 2da5649fc545f..0026c77351347 100644
@@ -931,6 +931,8 @@ build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 		 * to mimic that here by taking a load/istream page
 		 * fault.
 		 */
+		if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS))
+			uasm_i_sync(p, 0);
 		UASM_i_LA(p, ptr, (unsigned long)tlb_do_page_fault_0);
 		uasm_i_jr(p, ptr);
 
@@ -1637,6 +1639,8 @@ static void
 iPTE_LW(u32 **p, unsigned int pte, unsigned int ptr)
 {
 #ifdef CONFIG_SMP
+	if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS))
+		uasm_i_sync(p, 0);
 # ifdef CONFIG_PHYS_ADDR_T_64BIT
 	if (cpu_has_64bits)
 		uasm_i_lld(p, pte, 0, ptr);
@@ -2218,6 +2222,8 @@ static void build_r4000_tlb_load_handler(void)
 #endif
 
 	uasm_l_nopage_tlbl(&l, p);
+	if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS))
+		uasm_i_sync(&p, 0);
 	build_restore_work_registers(&p);
 #ifdef CONFIG_CPU_MICROMIPS
 	if ((unsigned long)tlb_do_page_fault_0 & 1) {
@@ -2273,6 +2279,8 @@ static void build_r4000_tlb_store_handler(void)
 #endif
 
 	uasm_l_nopage_tlbs(&l, p);
+	if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS))
+		uasm_i_sync(&p, 0);
 	build_restore_work_registers(&p);
 #ifdef CONFIG_CPU_MICROMIPS
 	if ((unsigned long)tlb_do_page_fault_1 & 1) {
@@ -2329,6 +2337,8 @@ static void build_r4000_tlb_modify_handler(void)
 #endif
 
 	uasm_l_nopage_tlbm(&l, p);
+	if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS))
+		uasm_i_sync(&p, 0);
 	build_restore_work_registers(&p);
 #ifdef CONFIG_CPU_MICROMIPS
 	if ((unsigned long)tlb_do_page_fault_1 & 1) {
Signature · 1 line
2.19.1
author maintainer
#18 lore raw

PATCH 19/19 fs: ratelimit __find_get_block_slow() failure message.

In reply to Sasha Levin

From: Tetsuo Handa <[email protected]>

[ Upstream commit 43636c804df0126da669c261fc820fb22f62bfc2 ]

When something let __find_get_block_slow() hit all_mapped path, it calls printk() for 100+ times per a second. But there is no need to print same message with such high frequency; it is just asking for stall warning, or at least bloating log files.

  [  399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
  [  399.873324][T15342] b_state=0x00000029, b_size=512
  [  399.878403][T15342] device loop0 blocksize: 4096
  [  399.883296][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
  [  399.890400][T15342] b_state=0x00000029, b_size=512
  [  399.895595][T15342] device loop0 blocksize: 4096
  [  399.900556][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
  [  399.907471][T15342] b_state=0x00000029, b_size=512
  [  399.912506][T15342] device loop0 blocksize: 4096

This patch reduces frequency to up to once per a second, in addition to concatenating three lines into one.

  [  399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8, b_state=0x00000029, b_size=512, device loop0 blocksize: 4096
---
 fs/buffer.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)
fs/buffer.c +10 -9
index 5d8f496d624ed..e0d46d47e3587 100644
@@ -207,6 +207,7 @@ __find_get_block_slow(struct block_device *bdev, sector_t block)
 	struct buffer_head *head;
 	struct page *page;
 	int all_mapped = 1;
+	static DEFINE_RATELIMIT_STATE(last_warned, HZ, 1);
 
 	index = block >> (PAGE_SHIFT - bd_inode->i_blkbits);
 	page = find_get_page_flags(bd_mapping, index, FGP_ACCESSED);
@@ -234,15 +235,15 @@ __find_get_block_slow(struct block_device *bdev, sector_t block)
 	 * file io on the block device and getblk.  It gets dealt with
 	 * elsewhere, don't buffer_error if we had some unmapped buffers
 	 */
-	if (all_mapped) {
-		printk("__find_get_block_slow() failed. "
-			"block=%llu, b_blocknr=%llu\n",
-			(unsigned long long)block,
-			(unsigned long long)bh->b_blocknr);
-		printk("b_state=0x%08lx, b_size=%zu\n",
-			bh->b_state, bh->b_size);
-		printk("device %pg blocksize: %d\n", bdev,
-			1 << bd_inode->i_blkbits);
+	ratelimit_set_flags(&last_warned, RATELIMIT_MSG_ON_RELEASE);
+	if (all_mapped && __ratelimit(&last_warned)) {
+		printk("__find_get_block_slow() failed. block=%llu, "
+		       "b_blocknr=%llu, b_state=0x%08lx, b_size=%zu, "
+		       "device %pg blocksize: %d\n",
+		       (unsigned long long)block,
+		       (unsigned long long)bh->b_blocknr,
+		       bh->b_state, bh->b_size, bdev,
+		       1 << bd_inode->i_blkbits);
 	}
 out_unlock:
 	spin_unlock(&bd_mapping->private_lock);
Signature · 1 line
2.19.1
author maintainer
#15 lore raw

PATCH 16/19 perf trace: Support multiple "vfs_getname" probes

In reply to Sasha Levin

From: Arnaldo Carvalho de Melo <[email protected]>

[ Upstream commit 6ab3bc240ade47a0f52bc16d97edd9accbe0024e ]

With a suitably defined "probe:vfs_getname" probe, 'perf trace' can "beautify" its output, so syscalls like open() or openat() can print the "filename" argument instead of just its hex address, like:

  $ perf trace -e open -- touch /dev/null
  [...]
       0.590 ( 0.014 ms): touch/18063 open(filename: /dev/null, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
  [...]

The output without such beautifier looks like:

     0.529 ( 0.011 ms): touch/18075 open(filename: 0xc78cf288, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3

However, when the vfs_getname probe expands to multiple probes and it is not the first one that is hit, the beautifier fails, as following:

     0.326 ( 0.010 ms): touch/18072 open(filename: , flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3

Fix it by hooking into all the expanded probes (inlines), now, for instance:

[root@quaco ~]# perf probe -l
probe:vfs_getname (on getname_flags:73@fs/namei.c with pathname)
probe:vfs_getname_1 (on getname_flags:73@fs/namei.c with pathname)
[root@quaco ~]# perf trace -e open* sleep 1

       0.010 ( 0.005 ms): sleep/5588 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: RDONLY|CLOEXEC)   = 3
       0.029 ( 0.006 ms): sleep/5588 openat(dfd: CWD, filename: /lib64/libc.so.6, flags: RDONLY|CLOEXEC)   = 3
       0.194 ( 0.008 ms): sleep/5588 openat(dfd: CWD, filename: /usr/lib/locale/locale-archive, flags: RDONLY|CLOEXEC) = 3

[root@quaco ~]#

Works, further verified with:

[root@quaco ~]# perf test vfs
65: Use vfs_getname probe to get syscall args filenames : Ok
66: Add vfs_getname probe to get syscall args filenames : Ok
67: Check open filename arg using perf trace + vfs_getname: Ok [root@quaco ~]#

---
 tools/perf/builtin-trace.c | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)
tools/perf/builtin-trace.c +18 -7
index 0fd8bfb77f652..6e568d361edf7 100644
@@ -2059,19 +2059,30 @@ static size_t trace__fprintf_thread_summary(struct trace *trace, FILE *fp);
 
 static bool perf_evlist__add_vfs_getname(struct perf_evlist *evlist)
 {
-	struct perf_evsel *evsel = perf_evsel__newtp("probe", "vfs_getname");
+	bool found = false;
+	struct perf_evsel *evsel, *tmp;
+	struct parse_events_error err = { .idx = 0, };
+	int ret = parse_events(evlist, "probe:vfs_getname*", &err);
 
-	if (IS_ERR(evsel))
+	if (ret)
 		return false;
 
-	if (perf_evsel__field(evsel, "pathname") == NULL) {
+	evlist__for_each_entry_safe(evlist, evsel, tmp) {
+		if (!strstarts(perf_evsel__name(evsel), "probe:vfs_getname"))
+			continue;
+
+		if (perf_evsel__field(evsel, "pathname")) {
+			evsel->handler = trace__vfs_getname;
+			found = true;
+			continue;
+		}
+
+		list_del_init(&evsel->node);
+		evsel->evlist = NULL;
 		perf_evsel__delete(evsel);
-		return false;
 	}
 
-	evsel->handler = trace__vfs_getname;
-	perf_evlist__add(evlist, evsel);
-	return true;
+	return found;
 }
 
 static struct perf_evsel *perf_evsel__new_pgfault(u64 config)
Signature · 1 line
2.19.1
author maintainer
#3 lore raw

PATCH 4/19 usb: phy: fix link errors

In reply to Sasha Levin

From: Anders Roxell <[email protected]>

[ Upstream commit f2105d42597f4d10e431b195d69e96dccaf9b012 ]

Fix link errors when CONFIG_FSL_USB2_OTG is enabled and USB_OTG_FSM is set to module then the following link error occurs.

aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_ioctl':
drivers/usb/phy/phy-fsl-usb.c:1083: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:1083:(.text+0x574): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_srp':
drivers/usb/phy/phy-fsl-usb.c:674: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:674:(.text+0x61c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_host':
drivers/usb/phy/phy-fsl-usb.c:593: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:593:(.text+0x7a4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_hnp':
drivers/usb/phy/phy-fsl-usb.c:695: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:695:(.text+0x858): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `a_wait_enum':
drivers/usb/phy/phy-fsl-usb.c:274: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:274:(.text+0x16f0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o:drivers/usb/phy/phy-fsl-usb.c:619: more undefined references to `otg_statemachine' follow
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_peripheral':
drivers/usb/phy/phy-fsl-usb.c:619:(.text+0x1fa0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' make[1]: *** [Makefile:1020: vmlinux] Error 1
make[1]: Target 'Image' not remade because of errors.
make: *** [Makefile:152: sub-make] Error 2
make: Target 'Image' not remade because of errors.

Rework so that FSL_USB2_OTG depends on that the USB_OTG_FSM is builtin.

---
 drivers/usb/phy/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/phy/Kconfig +1 -1
index 125cea1c3c8df..19ce615455c1b 100644
@@ -20,7 +20,7 @@ config AB8500_USB
 
 config FSL_USB2_OTG
 	bool "Freescale USB OTG Transceiver Driver"
-	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM
+	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM=y && PM
 	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
 	select USB_PHY
 	help
Signature · 1 line
2.19.1
author maintainer
#1 lore raw

PATCH 2/19 ARM: pxa: ssp: unneeded to free devm_ allocated data

In reply to Sasha Levin

From: Peng Hao <[email protected]>

[ Upstream commit ba16adeb346387eb2d1ada69003588be96f098fa ]

devm_ allocated data will be automatically freed. The free of devm_ allocated data is invalid.

Fixes 1c459de1e645 ("ARM: pxa: ssp: use devm_ functions")
[title's prefix changed]
---
 arch/arm/plat-pxa/ssp.c | 3 ---
 1 file changed, 3 deletions(-)
arch/arm/plat-pxa/ssp.c +0 -3
index ba13f793fbce4..b92673efffffb 100644
@@ -237,8 +237,6 @@ static int pxa_ssp_remove(struct platform_device *pdev)
 	if (ssp == NULL)
 		return -ENODEV;
 
-	iounmap(ssp->mmio_base);
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(res->start, resource_size(res));
 
@@ -248,7 +246,6 @@ static int pxa_ssp_remove(struct platform_device *pdev)
 	list_del(&ssp->node);
 	mutex_unlock(&ssp_lock);
 
-	kfree(ssp);
 	return 0;
 }
 
Signature · 1 line
2.19.1