IB/mlx5: Use mlx5 core to create/destroy a DEVX DCT
Subsystems (5)
PATCH 1/1 IB/mlx5: Use mlx5 core to create/destroy a DEVX DCT
From: Yishai Hadas <[email protected]>
To prevent a hardware memory leak when a DEVX DCT object is destroyed without calling DRAIN DCT before, (e.g. under cleanup flow), need to manage its creation and destruction via mlx5 core.
In that case the DRAIN DCT command will be called and only once that it will be completed the DESTROY DCT command will be called. Otherwise, the DESTROY DCT may fail and a hardware leak may occur.
As of that change the DRAIN DCT command should not be exposed any more from DEVX, it's managed internally by the driver to work as expected by the device specification.
--- drivers/infiniband/hw/mlx5/devx.c | 34 +++++++++++++++----- drivers/infiniband/hw/mlx5/qp.c | 4 ++- drivers/net/ethernet/mellanox/mlx5/core/qp.c | 6 ++-- include/linux/mlx5/qp.h | 3 +- 4 files changed, 34 insertions(+), 13 deletions(-)
drivers/infiniband/hw/mlx5/devx.c +26 -8
@@ -20,6 +20,7 @@enum devx_obj_flags {DEVX_OBJ_FLAGS_INDIRECT_MKEY =1 <<0 , +DEVX_OBJ_FLAGS_DCT =1 <<1 , };struct devx_async_data {
@@ -39,7 +40,10 @@ struct devx_obj {u32 dinlen;/* destroy inbox length */ u32 dinbox[MLX5_MAX_DESTROY_INBOX_SIZE_DW ];u32 flags; -struct mlx5_ib_devx_mr devx_mr; +union { +struct mlx5_ib_devx_mr devx_mr; +struct mlx5_core_dct core_dct; + }; };struct devx_umem {
@@ -347,7 +351,6 @@ static u64 devx_get_obj_id(const void *in) obj_id =get_enc_obj_id (MLX5_CMD_OP_CREATE_RQ ,MLX5_GET (arm_rq_in, in, srq_number));break ; -case MLX5_CMD_OP_DRAIN_DCT :case MLX5_CMD_OP_ARM_DCT_FOR_KEY_VIOLATION : obj_id =get_enc_obj_id (MLX5_CMD_OP_CREATE_DCT ,MLX5_GET (drain_dct_in, in, dctn));
@@ -618,7 +621,6 @@ static bool devx_is_obj_modify_cmd(const void *in)case MLX5_CMD_OP_2RST_QP :case MLX5_CMD_OP_ARM_XRC_SRQ :case MLX5_CMD_OP_ARM_RQ : -case MLX5_CMD_OP_DRAIN_DCT :case MLX5_CMD_OP_ARM_DCT_FOR_KEY_VIOLATION :case MLX5_CMD_OP_ARM_XRQ :case MLX5_CMD_OP_SET_XRQ_DC_PARAMS_ENTRY :
@@ -1124,7 +1126,11 @@ static int devx_obj_cleanup(struct ib_uobject *uobject,if (obj->flags &DEVX_OBJ_FLAGS_INDIRECT_MKEY )devx_cleanup_mkey (obj); - ret =mlx5_cmd_exec (obj->mdev, obj->dinbox, obj->dinlen, out,sizeof (out)); +if (obj->flags &DEVX_OBJ_FLAGS_DCT ) + ret =mlx5_core_destroy_dct (obj->mdev, &obj->core_dct); +else + ret =mlx5_cmd_exec (obj->mdev, obj->dinbox, obj->dinlen, out, +sizeof (out));if (ib_is_destroy_retryable (ret, why, uobject))return ret;
@@ -1185,9 +1191,17 @@ static int UVERBS_HANDLER(MLX5_IB_METHOD_DEVX_OBJ_CREATE)(devx_set_umem_valid (cmd_in); } - err =mlx5_cmd_exec (dev->mdev, cmd_in, - cmd_in_len, - cmd_out, cmd_out_len); +if (opcode ==MLX5_CMD_OP_CREATE_DCT ) { + obj->flags |=DEVX_OBJ_FLAGS_DCT ; + err =mlx5_core_create_dct (dev->mdev, &obj->core_dct, + cmd_in, cmd_in_len, + cmd_out, cmd_out_len); + }else { + err =mlx5_cmd_exec (dev->mdev, cmd_in, + cmd_in_len, + cmd_out, cmd_out_len); + } +if (err) goto obj_free;
@@ -1214,7 +1228,11 @@ static int UVERBS_HANDLER(MLX5_IB_METHOD_DEVX_OBJ_CREATE)(if (obj->flags &DEVX_OBJ_FLAGS_INDIRECT_MKEY )devx_cleanup_mkey (obj); obj_destroy: -mlx5_cmd_exec (obj->mdev, obj->dinbox, obj->dinlen, out,sizeof (out)); +if (obj->flags &DEVX_OBJ_FLAGS_DCT ) +mlx5_core_destroy_dct (obj->mdev, &obj->core_dct); +else +mlx5_cmd_exec (obj->mdev, obj->dinbox, obj->dinlen, out, +sizeof (out)); obj_free:kfree (obj);return err;
drivers/infiniband/hw/mlx5/qp.c +3 -1
@@ -3729,6 +3729,7 @@ static int mlx5_ib_modify_dct(struct ib_qp *ibqp, struct ib_qp_attr *attr, }else if (cur_state ==IB_QPS_INIT && new_state ==IB_QPS_RTR ) {struct mlx5_ib_modify_qp_resp resp = {}; +u32 out[MLX5_ST_SZ_DW (create_dct_out)] = {0 };u32 min_resp_len = offsetof(typeof (resp ), dctn) +sizeof (resp.dctn);
@@ -3747,7 +3748,8 @@ static int mlx5_ib_modify_dct(struct ib_qp *ibqp, struct ib_qp_attr *attr,MLX5_SET (dctc, dctc, hop_limit, attr->ah_attr.grh.hop_limit); err =mlx5_core_create_dct (dev->mdev, &qp->dct.mdct, qp->dct.in, -MLX5_ST_SZ_BYTES (create_dct_in)); +MLX5_ST_SZ_BYTES (create_dct_in), out, +sizeof (out));if (err)return err; resp.dctn = qp->dct.mdct.mqp.qpn;
drivers/net/ethernet/mellanox/mlx5/core/qp.c +3 -3
@@ -261,16 +261,16 @@ static int _mlx5_core_destroy_dct(struct mlx5_core_dev *dev,int mlx5_core_create_dct (struct mlx5_core_dev *dev,struct mlx5_core_dct *dct, -u32 *in,int inlen) +u32 *in,int inlen, +u32 *out,int outlen) { -u32 out[MLX5_ST_SZ_DW (create_dct_out)] = {0 };struct mlx5_core_qp *qp = &dct->mqp;int err;init_completion (&dct->drained);MLX5_SET (create_dct_in, in, opcode,MLX5_CMD_OP_CREATE_DCT ); - err =mlx5_cmd_exec (dev, in, inlen, &out,sizeof (out)); + err =mlx5_cmd_exec (dev, in, inlen, out, outlen);if (err) {mlx5_core_warn (dev,"create DCT failed, ret %d\n" , err);return err;
include/linux/mlx5/qp.h +2 -1
@@ -557,7 +557,8 @@ static inline struct mlx5_core_mkey *__mlx5_mr_lookup(struct mlx5_core_dev *dev,int mlx5_core_create_dct (struct mlx5_core_dev *dev,struct mlx5_core_dct *qp, -u32 *in,int inlen); +u32 *in,int inlen, +u32 *out,int outlen); int mlx5_core_create_qp(struct mlx5_core_dev *dev, struct mlx5_core_qp *qp, u32 *in,
Signature · 1 line
2.19.1
Jason Gunthorpe
AppliedQuoted 18 lines · Leon Romanovsky
From: Yishai Hadas <[email protected]>
To prevent a hardware memory leak when a DEVX DCT object is destroyed without calling DRAIN DCT before, (e.g. under cleanup flow), need to manage its creation and destruction via mlx5 core.
In that case the DRAIN DCT command will be called and only once that it will be completed the DESTROY DCT command will be called. Otherwise, the DESTROY DCT may fail and a hardware leak may occur.
As of that change the DRAIN DCT command should not be exposed any more from DEVX, it's managed internally by the driver to work as expected by the device specification.
Fixes 7efce3691d33 ("IB/mlx5: Add obj create and destroy functionality")Signed-off-by Yishai Hadas <[email protected]>Reviewed-by Artemy Kovalyov <[email protected]>Signed-off-by Leon Romanovsky <[email protected]>
Quoted 6 lines
--- drivers/infiniband/hw/mlx5/devx.c | 34 +++++++++++++++----- drivers/infiniband/hw/mlx5/qp.c | 4 ++- drivers/net/ethernet/mellanox/mlx5/core/qp.c | 6 ++-- include/linux/mlx5/qp.h | 3 +- 4 files changed, 34 insertions(+), 13 deletions(-)
Applied to for-rc
Thanks,
Jason