Add support for loading FPGA bitstream
v12 cover Add support for loading FPGA bitstream
From: Tien Fong Chee <[email protected]>
This version mainly resolved comments from Dinh in [v11].
This series is working on top of u-boot.git http://git.denx.de/u-boot.git
These patches are required before applying this series of patches
1. [U-Boot,v4] misc: fs_loader: Add support for initializing block device
https://patchwork.ozlabs.org/project/uboot/list/?series=89282 (done review)
2. [U-Boot] fpga: Replace char * with const char * for filename
https://patchwork.ozlabs.org/patch/1042665/ (done review)
3. [U-Boot] misc: fs_loader: Replace label with DT phandle
https://patchwork.ozlabs.org/patch/1051782/ (under review)
[v11]: https://www.mail-archive.com/u-boot at lists.denx.de/msg318174.html [v10]: https://www.mail-archive.com/u-boot at lists.denx.de/msg318167.html [v9]: https://www.mail-archive.com/u-boot at lists.denx.de/msg316086.html [v8]: https://www.mail-archive.com/u-boot at lists.denx.de/msg316086.html [v7]: https://www.mail-archive.com/u-boot at lists.denx.de/msg314511.html
Tien Fong Chee (9):
ARM: socfpga: Description on FPGA bitstream type and file name for
Arria 10
ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
ARM: socfpga: Cleaning up and ensuring consistent format messages in
driver
ARM: socfpga: Moving the watchdog reset to the for-loop status polling
ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
ARM: socfpga: Synchronize the configuration for A10 SoCDK
ARM: socfpga: Increase Malloc pool size to support FAT filesystem in
SPL
arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts | 17 + .../include/mach/fpga_manager_arria10.h | 40 +- arch/arm/mach-socfpga/spl_a10.c | 31 +- board/altera/arria10-socdk/fit_spl_fpga.its | 38 ++ configs/socfpga_arria10_defconfig | 22 +- .../fpga/altera-socfpga-a10-fpga-mgr.txt | 26 +- drivers/fpga/socfpga_arria10.c | 514 ++++++++++++++++++++- include/configs/socfpga_common.h | 4 +- include/image.h | 4 + 9 files changed, 664 insertions(+), 32 deletions(-) create mode 100644 board/altera/arria10-socdk/fit_spl_fpga.its
Signature · 1 line
2.13.0
PATCH v12 1/9 ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
From: Tien Fong Chee <[email protected]>
This patch adds description on properties about file name used for both peripheral bitstream and core bitstream.
---
changes for v12
- No changes.
changes for v11
- No changes.
changes for v10
- No changes.
changes for v9
- No changes.
changes for v8
- Removed explanation about support for altr,bitstream-core
changes for v7
- Provided example of setting FPGA FIT image for both early IO release and full release FPGA configuration.
--- .../fpga/altera-socfpga-a10-fpga-mgr.txt | 26 +++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-)
doc/device-tree-bindings/fpga/altera-socfpga-a10-fpga-mgr.txt +25 -1
@@ -7,8 +7,31 @@ Required properties: - The second index is for writing FPGA configuration data. - resets : Phandle and reset specifier for the device's reset. - clocks : Clocks used by the device. +- altr,bitstream : Fit image file name for both FPGA peripheral bitstream, + FPGA core bitstream and full bitstream. -Example: + Full bitstream, consist of peripheral bitstream and core + bitstream. + + FPGA peripheral bitstream is used to initialize FPGA IOs, + PLL, IO48 and DDR. This bitstream is required to get DDR up + running. + + FPGA core bitstream contains FPGA design which is used to + program FPGA CRAM and ERAM. + +Example: Bundles both peripheral bitstream and core bitstream into FIT image + called fit_spl_fpga.itb. This FIT image can be created through running + this command: tools/mkimage + -E -p 400 + -f board/altera/arria10-socdk/fit_spl_fpga.its + fit_spl_fpga.itb + + For details of describing structure and contents of the FIT image, + please refer board/altera/arria10-socdk/fit_spl_fpga.its + +- Examples for booting with full release or booting with early IO release, then + follow by entering early user mode: fpga_mgr: fpga-mgr at ffd03000 { compatible = "altr,socfpga-a10-fpga-mgr";
@@ -16,4 +39,5 @@ Example: 0xffcfe400 0x20>; clocks = <&l4_mp_clk>; resets = <&rst FPGAMGR_RESET>; + altr,bitstream = "fit_spl_fpga.itb"; };
Signature · 1 line
2.13.0
PATCH v12 2/9 ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
In reply to tien.fong.chee at intel.comFrom: Tien Fong Chee <[email protected]>
Add default fitImage file bundling FPGA bitstreams for Arria10.
---
changes for v12
- No changes.
changes for v11
- Replaced core image node "-2" with "-1",
the numeric associates the core and periph images in case where there are multiple.
changes for v10
- Replaced both image nodes "@1" and "@2" with "-1" and "-2" respectively.
changes for v9
- Reordered the images and fpga configurations.
- Removed the load property at core image.
changes for v8
- Changed the FPGA node name to fpga-core and fpga-periph for both core and periph bitstreams respectively.
changes for v7
- No changes.
--- board/altera/arria10-socdk/fit_spl_fpga.its | 38 +++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 board/altera/arria10-socdk/fit_spl_fpga.its
board/altera/arria10-socdk/fit_spl_fpga.its new file +38 -0
@@ -0,0 +1,38 @@ +// SPDX-License-Identifier: GPL-2.0 + /* + * Copyright (C) 2019 Intel Corporation <www.intel.com> + * + */ + +/dts-v1/; + +/ { + description = "FIT image with FPGA bistream"; + #address-cells = <1>; + + images { + fpga-periph-1 { + description = "FPGA peripheral bitstream"; + data = /incbin/("../../../ghrd_10as066n2.periph.rbf"); + type = "fpga"; + arch = "arm"; + compression = "none"; + }; + + fpga-core-1 { + description = "FPGA core bitstream"; + data = /incbin/("../../../ghrd_10as066n2.core.rbf"); + type = "fpga"; + arch = "arm"; + compression = "none"; + }; + }; + + configurations { + default = "config-1"; + config-1 { + description = "Boot with FPGA early IO release config"; + fpga = "fpga-periph-1", "fpga-core-1"; + }; + }; +};
Signature · 1 line
2.13.0
PATCH v12 3/9 ARM: socfpga: Cleaning up and ensuring consistent format messages in driver
In reply to tien.fong.chee at intel.comFrom: Tien Fong Chee <[email protected]>
Ensure all the debug messages are always prefix with "FPGA: " and comment beginning with uppercase letter.
---
changes for v12
- Improved the commit messages.
changes for v11
- No changes.
changes for v10
- This patch was split out from [PATCH v10 5/9]
ARM: socfpga: Add FPGA drivers for Arria 10 FPGA.
--- drivers/fpga/socfpga_arria10.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/fpga/socfpga_arria10.c +7 -6
@@ -94,7 +94,7 @@ int fpgamgr_wait_early_user_mode(void) i++; } -debug ("Additional %i sync word needed\n" , i); +debug ("FPGA: Additional %i sync word needed\n" , i);/* restoring original CDRATIO */ fpgamgr_set_cd_ratio (cd_ratio);
@@ -172,9 +172,10 @@ static int fpgamgr_set_cdratio_cdwidth(unsigned int cfg_width, u32 *rbf_data, compress = (rbf_data[COMPRESSION_OFFSET ] >>1 ) &1 ; compress = !compress; -debug ("header word %d = %08x\n" ,69 , rbf_data[69 ]); -debug ("header word %d = %08x\n" ,229 , rbf_data[229 ]); -debug ("read from rbf header: encrypt=%d compress=%d\n" , encrypt, compress); +debug ("FPGA: Header word %d = %08x.\n" ,69 , rbf_data[69 ]); +debug ("FPGA: Header word %d = %08x.\n" ,229 , rbf_data[229 ]); +debug ("FPGA: Read from rbf header: encrypt=%d compress=%d.\n" , encrypt, + compress);/* * from the register map description of cdratio in imgcfg_ctrl_02:
@@ -455,10 +456,10 @@ int socfpga_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size) {int status; -/* disable all signals from hps peripheral controller to fpga */ +/* Disable all signals from hps peripheral controller to fpga */ writel (0 , &system_manager_base->fpgaintf_en_global); -/* disable all axi bridge (hps2fpga, lwhps2fpga & fpga2hps) */ +/* Disable all axi bridge (hps2fpga, lwhps2fpga & fpga2hps) */ socfpga_bridges_reset ();/* Initialize the FPGA Manager */
Signature · 1 line
2.13.0
PATCH v12 4/9 ARM: socfpga: Moving the watchdog reset to the for-loop status polling
In reply to tien.fong.chee at intel.comFrom: Tien Fong Chee <[email protected]>
Ensure the watchdog is reset timely on each status polling.
---
changes for v12
- Improved the commit messages.
changes for v11
- No changes.
changes for v10
- This patch was split out from [PATCH v10 5/9]
ARM: socfpga: Add FPGA drivers for Arria 10 FPGA.
--- drivers/fpga/socfpga_arria10.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/fpga/socfpga_arria10.c +1 -1
@@ -360,6 +360,7 @@ static int fpgamgr_program_poll_cd(void)printf ("nstatus == 0 while waiting for condone\n" );return -EPERM ; } +WATCHDOG_RESET (); }if (i ==FPGA_TIMEOUT_CNT )
@@ -433,7 +434,6 @@ int fpgamgr_program_finish(void)printf ("FPGA: Poll CD failed with error code %d\n" , status);return -EPERM ; } -WATCHDOG_RESET ();/* Ensure the FPGA entering user mode */ status =fpgamgr_program_poll_usermode ();
Signature · 1 line
2.13.0
PATCH v12 4/9 ARM: socfpga: Moving the watchdog reset to the for-loop status polling
Quoted 3 lines · tien.fong.chee at intel.com
From: Tien Fong Chee <[email protected]>
Ensure the watchdog is reset timely on each status polling.
I would have expected a longer commit message here explaining why this is done, and from where, where to, and why the watchdog reset has been moved.
Anyway, I don't want to hold back this series again for this, but please next time: write longer commit messages. Better write too much than risk someone in the future doesn't get what or why you did things.
Thanks,
Simon
Quoted 39 lines
Signed-off-by Tien Fong Chee <[email protected]>---
changes for v12
- Improved the commit messages.changes for v11
- No changes.changes for v10
- This patch was split out from [PATCH v10 5/9]
ARM: socfpga: Add FPGA drivers for Arria 10 FPGA.--- drivers/fpga/socfpga_arria10.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/fpga/socfpga_arria10.c +1
-1@@ -360,6 +360,7 @@ static int fpgamgr_program_poll_cd(void)printf ("nstatus == 0 while waiting for condone\n" );return -EPERM ; } +WATCHDOG_RESET (); }if (i ==FPGA_TIMEOUT_CNT )@@ -433,7 +434,6 @@ int fpgamgr_program_finish(void)printf ("FPGA: Poll CD failed with error code %d\n" , status);return -EPERM ; } -WATCHDOG_RESET ();/* Ensure the FPGA entering user mode */ status =fpgamgr_program_poll_usermode ();
Chee
PATCH v12 4/9 ARM: socfpga: Moving the watchdog reset to the for-loop status polling
Quoted 12 lines · Simon Goldschmidt
Quoted 4 lines · tien.fong.chee at intel.com
From: Tien Fong Chee <[email protected]>
Ensure the watchdog is reset timely on each status polling.
I would have expected a longer commit message here explaining why this
is done, and from where, where to, and why the watchdog reset has been
moved.
Quoted 6 lines
Anyway, I don't want to hold back this series again for this, but please
next time: write longer commit messages. Better write too much than risk
someone in the future doesn't get what or why you did things.
Noted.
Thanks.
Quoted 44 lines
Quoted 44 lines
Signed-off-by Tien Fong Chee <[email protected]>---
changes for v12
- Improved the commit messages.changes for v11
- No changes.changes for v10
- This patch was split out from [PATCH v10 5/9]
ARM: socfpga: Add FPGA drivers for Arria 10 FPGA.
---
drivers/fpga/socfpga_arria10.c| 2 +-1 file changed, 1 insertion(+), 1 deletion(-)drivers/fpga/socfpga_arria10.c +0
-0@@ -360,6 +360,7 @@ static int fpgamgr_program_poll_cd(void)
printf("nstatus == 0 while waiting for condone\n");
return-EPERM;
}drivers/fpga/socfpga_arria10.c +1
-0+WATCHDOG_RESET ();}
if (i ==FPGA_TIMEOUT_CNT)drivers/fpga/socfpga_arria10.c +0
-0@@ -433,7 +434,6 @@ int fpgamgr_program_finish(void)
printf("FPGA: Poll CD failed with error code %d\n", status);
return-EPERM;
}drivers/fpga/socfpga_arria10.c +0
-1-WATCHDOG_RESET ();
/* Ensure the FPGA entering user mode */
status =fpgamgr_program_poll_usermode();
Chee
PATCH v12 4/9 ARM: socfpga: Moving the watchdog reset to the for-loop status polling
In reply to Simon GoldschmidtQuoted 12 lines · Simon Goldschmidt
Quoted 4 lines · tien.fong.chee at intel.com
From: Tien Fong Chee <[email protected]>
Ensure the watchdog is reset timely on each status polling.
I would have expected a longer commit message here explaining why this
is done, and from where, where to, and why the watchdog reset has been
moved.
Quoted 9 lines
Anyway, I don't want to hold back this series again for this, but please
next time: write longer commit messages. Better write too much than risk
someone in the future doesn't get what or why you did things.Thanks,
Simon
I will improve the commit messages in next version patch set.
Thanks.
Quoted 43 lines
Quoted 43 lines
Signed-off-by Tien Fong Chee <[email protected]>---
changes for v12
- Improved the commit messages.changes for v11
- No changes.changes for v10
- This patch was split out from [PATCH v10 5/9]
ARM: socfpga: Add FPGA drivers for Arria 10 FPGA.
---
drivers/fpga/socfpga_arria10.c| 2 +-1 file changed, 1 insertion(+), 1 deletion(-)drivers/fpga/socfpga_arria10.c +0
-0@@ -360,6 +360,7 @@ static int fpgamgr_program_poll_cd(void)
printf("nstatus == 0 while waiting for condone\n");
return-EPERM;
}drivers/fpga/socfpga_arria10.c +1
-0+WATCHDOG_RESET ();}
if (i ==FPGA_TIMEOUT_CNT)drivers/fpga/socfpga_arria10.c +0
-0@@ -433,7 +434,6 @@ int fpgamgr_program_finish(void)
printf("FPGA: Poll CD failed with error code %d\n", status);
return-EPERM;
}drivers/fpga/socfpga_arria10.c +0
-1-WATCHDOG_RESET ();
/* Ensure the FPGA entering user mode */
status =fpgamgr_program_poll_usermode();
PATCH v12 5/9 ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
In reply to tien.fong.chee at intel.comFrom: Tien Fong Chee <[email protected]>
Add FPGA driver to support program FPGA with FPGA bitstream loading from filesystem. The driver are designed based on generic firmware loader framework. The driver can handle FPGA program operation from loading FPGA bitstream in flash to memory and then to program FPGA.
---
changes for v12
- No changes.
changes for v11
- No changes.
changes for v10
-Cleaned up the codes.
-Return -EPERM when programing core on non early IO release mode. -Using live function to get rid of gd->
-Removed @0 for fs-loader node
changes for v9
- Support data offset
- Added default DDR load address
- Squashed the image.h
- Changed to phandle
- Ensure the DDR is fully up running by checking the gd->ram
changes for v8
- Added codes to discern bitstream type based on fpga node name.
changes for v7
- Restructure the FPGA driver to support both peripheral bitstream and core bitstream bundled into FIT image.
- Support loadable property for core bitstream. User can set loadable in DDR for better performance. This loading would be done in one large chunk instead of chunk by chunk loading with small memory buffer.
--- arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts | 17 + .../include/mach/fpga_manager_arria10.h | 39 +- drivers/fpga/socfpga_arria10.c | 497 ++++++++++++++++++++- include/image.h | 4 + 4 files changed, 542 insertions(+), 15 deletions(-)
arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts +17 -0
@@ -18,6 +18,23 @@ /dts-v1/; #include "socfpga_arria10_socdk.dtsi" +/ { + chosen { + firmware-loader = <&fs_loader0>; + }; + + fs_loader0: fs-loader { + u-boot,dm-pre-reloc; + compatible = "u-boot,fs-loader"; + phandlepart = <&mmc 1>; + }; +}; + +&fpga_mgr { + u-boot,dm-pre-reloc; + altr,bitstream = "fit_spl_fpga.itb"; +}; + &mmc { u-boot,dm-pre-reloc; status = "okay";
arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +37 -2
@@ -1,9 +1,13 @@/* SPDX-License-Identifier: GPL-2.0 */ /* -* Copyright (C) 2017 Intel Corporation <www.intel.com> +* Copyright (C) 2017-2019 Intel Corporation <www.intel.com> * All rights reserved. */ +#include <asm/cache.h> +#include <altera.h> +#include <image.h> +#ifndef _FPGA_MANAGER_ARRIA10_H_#define _FPGA_MANAGER_ARRIA10_H_
@@ -51,6 +55,10 @@#define ALT_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SET_MSK BIT(24)#define ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_LSB 16 +#define FPGA_SOCFPGA_A10_RBF_UNENCRYPTED 0xa65c +#define FPGA_SOCFPGA_A10_RBF_ENCRYPTED 0xa65d +#define FPGA_SOCFPGA_A10_RBF_PERIPH 0x0001 +#define FPGA_SOCFPGA_A10_RBF_CORE 0x8001#ifndef __ASSEMBLY__ struct socfpga_fpga_manager {
@@ -88,12 +96,39 @@ struct socfpga_fpga_manager {u32 imgcfg_fifo_status; }; +enum rbf_type { + unknown, + periph_section, + core_section +}; + +enum rbf_security { + invalid, + unencrypted, + encrypted +}; + +struct rbf_info { +enum rbf_type section; +enum rbf_security security; +}; + +struct fpga_loadfs_info { +fpga_fs_info *fpga_fsinfo; +u32 remaining; +u32 offset; +struct rbf_info rbfinfo; +}; +/* Functions */ int fpgamgr_program_init (u32 * rbf_data,size_t rbf_size);int fpgamgr_program_finish (void );int is_fpgamgr_user_mode (void );int fpgamgr_wait_early_user_mode (void ); - +const char *get_fpga_filename (void ); +int socfpga_loadfs (fpga_fs_info *fpga_fsinfo,const void *buf,size_t bsize, +u32 offset); +void fpgamgr_program (const void *buf,size_t bsize,u32 offset);#endif /* __ASSEMBLY__ */ #endif /* _FPGA_MANAGER_ARRIA10_H_ */
drivers/fpga/socfpga_arria10.c +484 -13
532 lines not on this page · raw message
include/image.h +4 -0
@@ -1046,6 +1046,10 @@ int fit_check_format(const void *fit);int fit_conf_find_compat (const void *fit,const void *fdt);int fit_conf_get_node (const void *fit,const char *conf_uname); +int fit_conf_get_prop_node_count (const void *fit,int noffset, +const char *prop_name); +int fit_conf_get_prop_node_index (const void *fit,int noffset, +const char *prop_name,int index);/** * fit_conf_get_prop_node() - Get node refered to by a configuration
Signature · 1 line
2.13.0
PATCH v12 5/9 ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Quoted 18 lines · tien.fong.chee at intel.com
From: Tien Fong Chee <[email protected]>
Add FPGA driver to support program FPGA with FPGA bitstream loading from filesystem. The driver are designed based on generic firmware loader framework. The driver can handle FPGA program operation from loading FPGA bitstream in flash to memory and then to program FPGA.
Signed-off-by Tien Fong Chee <[email protected]>---
changes for v12
- No changes.changes for v11
- No changes.changes for v10
Review
Quoted 2 lines
(quoted diff) +0
-2-Cleaned up the codes. -Return -EPERM when programing core on non early IO release mode. > -Using live function to get rid of gd->
You got rid of gd-> in v10? How come I see numerous references to it below?
Regards,
Simon
Quoted 681 lines
-Removed @0 for fs-loader node
changes for v9
- Support data offset
- Added default DDR load address
- Squashed theimage.h
- Changed to phandle
- Ensure the DDR is fully up running by checking thegd->ramchanges for v8
- Added codes to discern bitstream type based on fpga node name.changes for v7
- Restructure the FPGA driver to support both peripheral bitstream and core bitstream bundled into FIT image.
- Support loadable property for core bitstream. User can set loadable in DDR for better performance. This loading would be done in one large chunk instead of chunk by chunk loading with small memory buffer.--- arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts | 17 + .../include/mach/fpga_manager_arria10.h | 39 +- drivers/fpga/socfpga_arria10.c | 497 ++++++++++++++++++++- include/image.h | 4 + 4 files changed, 542 insertions(+), 15 deletions(-)arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts +17
-0@@ -18,6 +18,23 @@ /dts-v1/; #include "socfpga_arria10_socdk.dtsi" +/ { + chosen { + firmware-loader = <&fs_loader0>; + }; + + fs_loader0: fs-loader { + u-boot,dm-pre-reloc; + compatible = "u-boot,fs-loader"; + phandlepart = <&mmc 1>; + }; +}; + +&fpga_mgr { + u-boot,dm-pre-reloc; + altr,bitstream = "fit_spl_fpga.itb"; +}; + &mmc { u-boot,dm-pre-reloc; status = "okay";arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +37
-2@@ -1,9 +1,13 @@/* SPDX-License-Identifier: GPL-2.0 */ /* -* Copyright (C) 2017 Intel Corporation <www.intel.com> +* Copyright (C) 2017-2019 Intel Corporation <www.intel.com> * All rights reserved. */ +#include <asm/cache.h> +#include <altera.h> +#include <image.h> +#ifndef _FPGA_MANAGER_ARRIA10_H_#define _FPGA_MANAGER_ARRIA10_H_@@ -51,6 +55,10 @@#define ALT_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SET_MSK BIT(24)#define ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_LSB 16 +#define FPGA_SOCFPGA_A10_RBF_UNENCRYPTED 0xa65c +#define FPGA_SOCFPGA_A10_RBF_ENCRYPTED 0xa65d +#define FPGA_SOCFPGA_A10_RBF_PERIPH 0x0001 +#define FPGA_SOCFPGA_A10_RBF_CORE 0x8001#ifndef __ASSEMBLY__ struct socfpga_fpga_manager {@@ -88,12 +96,39 @@ struct socfpga_fpga_manager {u32 imgcfg_fifo_status; }; +enum rbf_type { + unknown, + periph_section, + core_section +}; + +enum rbf_security { + invalid, + unencrypted, + encrypted +}; + +struct rbf_info { +enum rbf_type section; +enum rbf_security security; +}; + +struct fpga_loadfs_info { +fpga_fs_info *fpga_fsinfo; +u32 remaining; +u32 offset; +struct rbf_info rbfinfo; +}; +/* Functions */ int fpgamgr_program_init (u32 * rbf_data,size_t rbf_size);int fpgamgr_program_finish (void );int is_fpgamgr_user_mode (void );int fpgamgr_wait_early_user_mode (void ); - +const char *get_fpga_filename (void ); +int socfpga_loadfs (fpga_fs_info *fpga_fsinfo,const void *buf,size_t bsize, +u32 offset); +void fpgamgr_program (const void *buf,size_t bsize,u32 offset);#endif /* __ASSEMBLY__ */ #endif /* _FPGA_MANAGER_ARRIA10_H_ */ drivers/fpga/socfpga_arria10.c +484
-13@@ -1,8 +1,7 @@// SPDX-License-Identifier: GPL-2.0 /* -* Copyright (C) 2017 Intel Corporation <www.intel.com> +* Copyright (C) 2017-2019 Intel Corporation <www.intel.com> */ -#include <asm/io.h> #include <asm/arch/fpga_manager.h> #include <asm/arch/reset_manager.h> @@ -10,8 +9,11 @@#include <asm/arch/sdram.h> #include <asm/arch/misc.h> #include <altera.h> +#include <asm/arch/pinmux.h> #include <common.h> +#include <dm/ofnode.h> #include <errno.h> +#include <fs_loader.h> #include <wait_bit.h> #include <watchdog.h> @@ -21,6 +23,9 @@#define COMPRESSION_OFFSET 229#define FPGA_TIMEOUT_MSEC 1000/* timeout in ms */ #define FPGA_TIMEOUT_CNT 0x1000000 +#define DEFAULT_DDR_LOAD_ADDRESS 0x400 + +DECLARE_GLOBAL_DATA_PTR ;static const struct socfpga_fpga_manager *fpga_manager_base = (void *)SOCFPGA_FPGAMGRREGS_ADDRESS ;@@ -448,13 +453,461 @@ int fpgamgr_program_finish(void)return 0 ; } -/* -* FPGA Manager to program the FPGA. This is the interface used by FPGA driver. -* Return 0 for sucess, non-zero for error. -*/ +ofnode get_fpga_mgr_ofnode (ofnode from) +{ +return ofnode_by_compatible (from,"altr,socfpga-a10-fpga-mgr" ); +} + +const char *get_fpga_filename (void ) +{ +const char *fpga_filename =NULL ; + +ofnode fpgamgr_node =get_fpga_mgr_ofnode (ofnode_null ()); + +if (ofnode_valid (fpgamgr_node)) + fpga_filename =ofnode_read_string (fpgamgr_node, +"altr,bitstream" ); + +return fpga_filename; +} + +static void get_rbf_image_info (struct rbf_info *rbf,u16 *buffer) +{ +/* +* Magic ID starting at: +* -> 1st dword[15:0] in periph.rbf +* -> 2nd dword[15:0] in core.rbf +* Note: dword == 32 bits +*/ +u32 word_reading_max =2 ; +u32 i; + +for (i =0 ; i < word_reading_max; i++) { +if (*(buffer + i) ==FPGA_SOCFPGA_A10_RBF_UNENCRYPTED ) { + rbf->security = unencrypted; + }else if (*(buffer + i) ==FPGA_SOCFPGA_A10_RBF_ENCRYPTED ) { + rbf->security = encrypted; + }else if (*(buffer + i +1 ) == +FPGA_SOCFPGA_A10_RBF_UNENCRYPTED ) { + rbf->security = unencrypted; + }else if (*(buffer + i +1 ) == +FPGA_SOCFPGA_A10_RBF_ENCRYPTED ) { + rbf->security = encrypted; + }else { + rbf->security = invalid; +continue ; + } + +/* PERIPH RBF(buffer + i + 1), CORE RBF(buffer + i + 2) */ +if (*(buffer + i +1 ) ==FPGA_SOCFPGA_A10_RBF_PERIPH ) { + rbf->section = periph_section; +break ; + }else if (*(buffer + i +1 ) ==FPGA_SOCFPGA_A10_RBF_CORE ) { + rbf->section = core_section; +break ; + }else if (*(buffer + i +2 ) ==FPGA_SOCFPGA_A10_RBF_PERIPH ) { + rbf->section = periph_section; +break ; + }else if (*(buffer + i +2 ) ==FPGA_SOCFPGA_A10_RBF_CORE ) { + rbf->section = core_section; +break ; + } + + rbf->section = unknown; +break ; + +WATCHDOG_RESET (); + } +} + +#ifdef CONFIG_FS_LOADER +static int first_loading_rbf_to_buffer (struct udevice *dev, +struct fpga_loadfs_info *fpga_loadfs, +u32 *buffer,size_t *buffer_bsize) +{ +u32 *buffer_p = (u32 *)*buffer; +u32 *loadable = buffer_p; +size_t buffer_size = *buffer_bsize; +size_t fit_size; +int ret, i, count, confs_noffset, images_noffset, rbf_offset, rbf_size; +const char *fpga_node_name =NULL ; +const char *uname =NULL ; + +/* Load image header into buffer */ + ret =request_firmware_into_buf (dev, + fpga_loadfs->fpga_fsinfo->filename, + buffer_p,sizeof (struct image_header ), +0 ); +if (ret <0 ) { +debug ("FPGA: Failed to read image header from flash.\n" ); +return -ENOENT ; + } + +if (image_get_magic ((struct image_header *)buffer_p) !=FDT_MAGIC ) { +debug ("FPGA: No FDT magic was found.\n" ); +return -EBADF ; + } + + fit_size =fdt_totalsize (buffer_p); + +if (fit_size > buffer_size) { +debug ("FPGA: FIT image is larger than available buffer.\n" ); +debug ("Please use FIT external data or increasing buffer.\n" ); +return -ENOMEM ; + } + +/* Load entire FIT into buffer */ + ret =request_firmware_into_buf (dev, + fpga_loadfs->fpga_fsinfo->filename, + buffer_p, fit_size,0 ); +if (ret <0 ) +return ret; + + ret =fit_check_format (buffer_p); +if (!ret) { +debug ("FPGA: No valid FIT image was found.\n" ); +return -EBADF ; + } + + confs_noffset =fdt_path_offset (buffer_p,FIT_CONFS_PATH ); + images_noffset =fdt_path_offset (buffer_p,FIT_IMAGES_PATH ); +if (confs_noffset <0 || images_noffset <0 ) { +debug ("FPGA: No Configurations or images nodes were found.\n" ); +return -ENOENT ; + } + +/* Get default configuration unit name from default property */ + confs_noffset =fit_conf_get_node (buffer_p,NULL ); +if (confs_noffset <0 ) { +debug ("FPGA: No default configuration was found in config.\n" ); +return -ENOENT ; + } + + count =fit_conf_get_prop_node_count (buffer_p, confs_noffset, +FIT_FPGA_PROP ); +if (count <0 ) { +debug ("FPGA: Invalid configuration format for FPGA node.\n" ); +return count; + } +debug ("FPGA: FPGA node count: %d\n" , count); + +for (i =0 ; i < count; i++) { + images_noffset =fit_conf_get_prop_node_index (buffer_p, + confs_noffset, +FIT_FPGA_PROP , i); + uname =fit_get_name (buffer_p, images_noffset,NULL ); +if (uname) { +debug ("FPGA: %s\n" , uname); + +if (strstr (uname,"fpga-periph" ) && + (!is_fpgamgr_early_user_mode () || +is_fpgamgr_user_mode ())) { + fpga_node_name = uname; +printf ("FPGA: Start to program " ); +printf ("peripheral/full bitstream ...\n" ); +break ; + }else if (strstr (uname,"fpga-core" ) && + (is_fpgamgr_early_user_mode () && + !is_fpgamgr_user_mode ())) { + fpga_node_name = uname; +printf ("FPGA: Start to program core " ); +printf ("bitstream ...\n" ); +break ; + } + } +WATCHDOG_RESET (); + } + +if (!fpga_node_name) { +debug ("FPGA: No suitable bitstream was found, count: %d.\n" , i); +return 1 ; + } + + images_noffset =fit_image_get_node (buffer_p, fpga_node_name); +if (images_noffset <0 ) { +debug ("FPGA: No node '%s' was found in FIT.\n" , + fpga_node_name); +return -ENOENT ; + } + +if (!fit_image_get_data_position (buffer_p, images_noffset, + &rbf_offset)) { +debug ("FPGA: Data position was found.\n" ); + }else if (!fit_image_get_data_offset (buffer_p, images_noffset, + &rbf_offset)) { +/* +* For FIT with external data, figure out where +* the external images start. This is the base +* for the data-offset properties in each image. +*/ + rbf_offset += ((fdt_totalsize (buffer_p) +3 ) & ~3 ); +debug ("FPGA: Data offset was found.\n" ); + }else { +debug ("FPGA: No data position/offset was found.\n" ); +return -ENOENT ; + } + + ret =fit_image_get_data_size (buffer_p, images_noffset, &rbf_size); +if (ret <0 ) { +debug ("FPGA: No data size was found (err=%d).\n" , ret); +return -ENOENT ; + } + +if (gd->ram_size < rbf_size) { +debug ("FPGA: Using default OCRAM buffer and size.\n" ); + }else { + ret =fit_image_get_load (buffer_p, images_noffset, + (ulong *)loadable); +if (ret <0 ) { + buffer_p = (u32 *)DEFAULT_DDR_LOAD_ADDRESS ; +debug ("FPGA: No loadable was found.\n" ); +debug ("FPGA: Using default DDR load address: 0x%x .\n" , +DEFAULT_DDR_LOAD_ADDRESS ); + }else { + buffer_p = (u32 *)*loadable; +debug ("FPGA: Found loadable address = 0x%x.\n" , + *loadable); + } + + buffer_size = rbf_size; + } + +debug ("FPGA: External data: offset = 0x%x, size = 0x%x.\n" , + rbf_offset, rbf_size); + + fpga_loadfs->remaining = rbf_size; + +/* +* Determine buffer size vs bitstream size, and calculating number of +* chunk by chunk transfer is required due to smaller buffer size +* compare to bitstream +*/ +if (rbf_size <= buffer_size) { +/* Loading whole bitstream into buffer */ + buffer_size = rbf_size; + fpga_loadfs->remaining =0 ; + }else { + fpga_loadfs->remaining -= buffer_size; + } + + fpga_loadfs->offset = rbf_offset; +/* Loading bitstream into buffer */ + ret =request_firmware_into_buf (dev, + fpga_loadfs->fpga_fsinfo->filename, + buffer_p, buffer_size, + fpga_loadfs->offset); +if (ret <0 ) { +debug ("FPGA: Failed to read bitstream from flash.\n" ); +return -ENOENT ; + } + +/* Getting info about bitstream types */ +get_rbf_image_info (&fpga_loadfs->rbfinfo, (u16 *)buffer_p); + +/* Update next reading bitstream offset */ + fpga_loadfs->offset += buffer_size; + +/* Update the final addr for bitstream */ + *buffer = (u32 )buffer_p; + +/* Update the size of bitstream to be programmed into FPGA */ + *buffer_bsize = buffer_size; + +return 0 ; +} + +static int subsequent_loading_rbf_to_buffer (struct udevice *dev, +struct fpga_loadfs_info *fpga_loadfs, +u32 *buffer,size_t *buffer_bsize) +{ +int ret =0 ; +u32 *buffer_p = (u32 *)*buffer; + +/* Read the bitstream chunk by chunk. */ +if (fpga_loadfs->remaining > *buffer_bsize) { + fpga_loadfs->remaining -= *buffer_bsize; + }else { + *buffer_bsize = fpga_loadfs->remaining; + fpga_loadfs->remaining =0 ; + } + + ret =request_firmware_into_buf (dev, + fpga_loadfs->fpga_fsinfo->filename, + buffer_p, *buffer_bsize, + fpga_loadfs->offset); +if (ret <0 ) { +debug ("FPGA: Failed to read bitstream from flash.\n" ); +return -ENOENT ; + } + +/* Update next reading bitstream offset */ + fpga_loadfs->offset += *buffer_bsize; + +return 0 ; +} + +int socfpga_loadfs (fpga_fs_info *fpga_fsinfo,const void *buf,size_t bsize, +u32 offset) +{ +struct fpga_loadfs_info fpga_loadfs; +struct udevice *dev; +int status, ret, size; +u32 buffer = (uintptr_t )buf; +size_t buffer_sizebytes = bsize; +size_t buffer_sizebytes_ori = bsize; +size_t total_sizeof_image =0 ; +ofnode node; +const fdt32_t *phandle_p; +u32 phandle; + + node =get_fpga_mgr_ofnode (ofnode_null ()); + +if (ofnode_valid (node)) { + phandle_p =ofnode_get_property (node,"firmware-loader" , &size); +if (!phandle_p) { + node =ofnode_path ("/chosen" ); +if (!ofnode_valid (node)) { +debug ("FPGA: /chosen node was not found.\n" ); +return -ENOENT ; + } + + phandle_p =ofnode_get_property (node,"firmware-loader" , + &size); +if (!phandle_p) { +debug ("FPGA: firmware-loader property was not" ); +debug (" found.\n" ); +return -ENOENT ; + } + } + }else { +debug ("FPGA: FPGA manager node was not found.\n" ); +return -ENOENT ; + } + + phandle =fdt32_to_cpu (*phandle_p); + ret =uclass_get_device_by_phandle_id (UCLASS_FS_FIRMWARE_LOADER , + phandle, &dev); +if (ret) +return ret; + +memset (&fpga_loadfs,0 ,sizeof (fpga_loadfs)); + + fpga_loadfs.fpga_fsinfo = fpga_fsinfo; + fpga_loadfs.offset = offset; + +printf ("FPGA: Checking FPGA configuration setting ...\n" ); + +/* +* Note: Both buffer and buffer_sizebytes values can be altered by +* function below. +*/ + ret =first_loading_rbf_to_buffer (dev, &fpga_loadfs, &buffer, + &buffer_sizebytes); +if (ret ==1 ) { +printf ("FPGA: Skipping configuration ...\n" ); +return 0 ; + }else if (ret) { +return ret; + } + +if (fpga_loadfs.rbfinfo.section == core_section && + !(is_fpgamgr_early_user_mode () && !is_fpgamgr_user_mode ())) { +debug ("FPGA : Must be in Early Release mode to program " ); +debug ("core bitstream.\n" ); +return -EPERM ; + } + +/* Disable all signals from HPS peripheral controller to FPGA */ +writel (0 , &system_manager_base->fpgaintf_en_global); + +/* Disable all axi bridges (hps2fpga, lwhps2fpga & fpga2hps) */ +socfpga_bridges_reset (); + +if (fpga_loadfs.rbfinfo.section == periph_section) { +/* Initialize the FPGA Manager */ + status =fpgamgr_program_init ((u32 *)buffer, buffer_sizebytes); +if (status) { +debug ("FPGA: Init with peripheral bitstream failed.\n" ); +return -EPERM ; + } + } + +/* Transfer bitstream to FPGA Manager */ +fpgamgr_program_write ((void *)buffer, buffer_sizebytes); + + total_sizeof_image += buffer_sizebytes; + +while (fpga_loadfs.remaining) { + ret =subsequent_loading_rbf_to_buffer (dev, + &fpga_loadfs, + &buffer, + &buffer_sizebytes_ori); + +if (ret) +return ret; + +/* Transfer data to FPGA Manager */ +fpgamgr_program_write ((void *)buffer, + buffer_sizebytes_ori); + + total_sizeof_image += buffer_sizebytes_ori; + +WATCHDOG_RESET (); + } + +if (fpga_loadfs.rbfinfo.section == periph_section) { +if (fpgamgr_wait_early_user_mode () != -ETIMEDOUT ) { +config_pins (gd->fdt_blob,"shared" ); +puts ("FPGA: Early Release Succeeded.\n" ); + }else { +debug ("FPGA: Failed to see Early Release.\n" ); +return -EIO ; + } + +/* For monolithic bitstream */ +if (is_fpgamgr_user_mode ()) { +/* Ensure the FPGA entering config done */ + status =fpgamgr_program_finish (); +if (status) +return status; + +config_pins (gd->fdt_blob,"fpga" ); +puts ("FPGA: Enter user mode.\n" ); + } + }else if (fpga_loadfs.rbfinfo.section == core_section) { +/* Ensure the FPGA entering config done */ + status =fpgamgr_program_finish (); +if (status) +return status; + +config_pins (gd->fdt_blob,"fpga" ); +puts ("FPGA: Enter user mode.\n" ); + }else { +debug ("FPGA: Config Error: Unsupported bitstream type.\n" ); +return -ENOEXEC ; + } + +return (int )total_sizeof_image; +} + +void fpgamgr_program (const void *buf,size_t bsize,u32 offset) +{ +fpga_fs_info fpga_fsinfo; + + fpga_fsinfo.filename =get_fpga_filename (); + +if (fpga_fsinfo.filename) +socfpga_loadfs (&fpga_fsinfo, buf, bsize, offset); +} +#endif + +/* This function is used to load the core bitstream from the OCRAM. */ int socfpga_load (Altera_desc *desc,const void *rbf_data,size_t rbf_size) { -int status; +unsigned long status; +struct rbf_info rbfinfo; + +memset (&rbfinfo,0 ,sizeof (rbfinfo));/* Disable all signals from hps peripheral controller to fpga */ writel (0 , &system_manager_base->fpgaintf_en_global);@@ -462,13 +915,31 @@ int socfpga_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size)/* Disable all axi bridge (hps2fpga, lwhps2fpga & fpga2hps) */ socfpga_bridges_reset (); -/* Initialize the FPGA Manager */ - status =fpgamgr_program_init ((u32 *)rbf_data, rbf_size); -if (status) -return status; +/* Getting info about bitstream types */ +get_rbf_image_info (&rbfinfo, (u16 *)rbf_data); + +if (rbfinfo.section == periph_section) { +/* Initialize the FPGA Manager */ + status =fpgamgr_program_init ((u32 *)rbf_data, rbf_size); +if (status) +return status; + } -/* Write the RBF data to FPGA Manager */ +if (rbfinfo.section == core_section && + !(is_fpgamgr_early_user_mode () && !is_fpgamgr_user_mode ())) { +debug ("FPGA : Must be in early release mode to program " ); +debug ("core bitstream.\n" ); +return -EPERM ; + } + +/* Write the bitstream to FPGA Manager */ fpgamgr_program_write (rbf_data, rbf_size); -return fpgamgr_program_finish (); + status =fpgamgr_program_finish (); +if (status) { +config_pins (gd->fdt_blob,"fpga" ); +puts ("FPGA: Enter user mode.\n" ); + } + +return status; }include/image.h +4
-0@@ -1046,6 +1046,10 @@ int fit_check_format(const void *fit);int fit_conf_find_compat (const void *fit,const void *fdt);int fit_conf_get_node (const void *fit,const char *conf_uname); +int fit_conf_get_prop_node_count (const void *fit,int noffset, +const char *prop_name); +int fit_conf_get_prop_node_index (const void *fit,int noffset, +const char *prop_name,int index);/** * fit_conf_get_prop_node() - Get node refered to by a configuration
Chee
PATCH v12 5/9 ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Quoted 23 lines · Simon Goldschmidt
Quoted 21 lines · tien.fong.chee at intel.com
From: Tien Fong Chee <[email protected]>
Add FPGA driver to support program FPGA with FPGA bitstream loading from
filesystem. The driver are designed based on generic firmware loader
framework. The driver can handle FPGA program operation from loading FPGA
bitstream in flash to memory and then to program FPGA.Signed-off-by Tien Fong Chee <[email protected]>---
changes for v12
- No changes.changes for v11
- No changes.
Quoted 6 lines
Review
Quoted 4 lines
changes for v10
(quoted diff) +0
-3-Cleaned up the codes. -Return -EPERM when programing core on non early IO release mode. > -Using live function to get rid of gd->You got rid of gd-> in v10? How come I see numerous references to it below?
get rid of using gd->fdt_blob for finding the node_offset. Details in https://patchwork.ozlabs.org/patch/1044415/
-/*
- * FPGA Manager to program the FPGA. This is the interface used by FPGA driver.
- * Return 0 for sucess, non-zero for error.
- */
+ofnode get_fpga_mgr_ofnode(void)
+{
+ int node_offset;
+
+ fdtdec_find_aliases_for_id(gd->fdt_blob, "fpga_mgr",
nit: using of live functions would be better to get rid of gd->.
+ COMPAT_ALTERA_SOCFPGA_FPGA0,
+ &node_offset, 1);
Thanks.
Quoted 778 lines
Quoted 778 lines
-Removed @0 for fs-loader node
changes for v9
- Support data offset
- Added default DDR load address
- Squashed theimage.h
- Changed to phandle
- Ensure the DDR is fully up running by checking thegd->ramchanges for v8
- Added codes to discern bitstream type based on fpga node name.changes for v7
- Restructure the FPGA driver to support both peripheral bitstream and core
bitstream bundled into FIT image.
- Support loadable property for core bitstream. User can set loadable
in DDR for better performance. This loading would be done in one large
chunk instead of chunk by chunk loading with small memory buffer.
---
arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts | 17 + .../include/mach/fpga_manager_arria10.h | 39 +- drivers/fpga/socfpga_arria10.c | 497
++++++++++++++++++++-
include/image.h | 4 +4 files changed, 542 insertions(+), 15 deletions(-)arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts +0
-0@@ -18,6 +18,23 @@ /dts-v1/; #include "socfpga_arria10_socdk.dtsi"arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts +17
-0+/ { + chosen { + firmware-loader = <&fs_loader0>; + }; + + fs_loader0: fs-loader { + u-boot,dm-pre-reloc; + compatible = "u-boot,fs-loader"; + phandlepart = <&mmc 1>; + }; +}; + +&fpga_mgr { + u-boot,dm-pre-reloc; + altr,bitstream = "fit_spl_fpga.itb"; +}; +&mmc {
u-boot,dm-pre-reloc;
status = "okay";(quoted diff) +0
-0
socfpga/include/mach/fpga_manager_arria10.hb/arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h
index09d13f6fd3..c5f67714aa100644arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +1
-1@@ -1,9 +1,13 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* -* Copyright (C) 2017 Intel Corporation <www.intel.com> +* Copyright (C) 2017-2019 Intel Corporation <www.intel.com> * All rights reserved. */ arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +4
-0+#include <asm/cache.h> +#include <altera.h> +#include <image.h> +#ifndef _FPGA_MANAGER_ARRIA10_H_
#define _FPGA_MANAGER_ARRIA10_H_arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +0
-0@@ -51,6 +55,10 @@ #define ALT_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SET_MSK BIT(24) #define ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_LSB16
arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +4
-0+#define FPGA_SOCFPGA_A10_RBF_UNENCRYPTED 0xa65c +#define FPGA_SOCFPGA_A10_RBF_ENCRYPTED 0xa65d +#define FPGA_SOCFPGA_A10_RBF_PERIPH 0x0001 +#define FPGA_SOCFPGA_A10_RBF_CORE 0x8001#ifndef
__ASSEMBLY__
structsocfpga_fpga_manager{arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +0
-0@@ -88,12 +96,39 @@ struct socfpga_fpga_manager { u32 imgcfg_fifo_status; };arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +24
-0+enum rbf_type { + unknown, + periph_section, + core_section +}; + +enum rbf_security { + invalid, + unencrypted, + encrypted +}; + +struct rbf_info { +enum rbf_type section; +enum rbf_security security; +}; + +struct fpga_loadfs_info { +fpga_fs_info *fpga_fsinfo; +u32 remaining; +u32 offset; +struct rbf_info rbfinfo; +}; +/* Functions */
intfpgamgr_program_init(u32 * rbf_data, size_t rbf_size); intfpgamgr_program_finish(void);
intis_fpgamgr_user_mode(void);
intfpgamgr_wait_early_user_mode(void);arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +2
-1- +const char *get_fpga_filename (void ); +int socfpga_loadfs(fpga_fs_info *fpga_fsinfo, const void *buf,
size_tbsize,arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +2
-0+ u32 offset); +void fpgamgr_program (const void *buf,size_t bsize,u32 offset);#endif /*
__ASSEMBLY__*/
#endif /* _FPGA_MANAGER_ARRIA10_H_ */drivers/fpga/socfpga_arria10.c +4
-2@@ -1,8 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2017 Intel Corporation <www.intel.com> + * Copyright (C) 2017-2019 Intel Corporation <www.intel.com> */ - #include <asm/io.h> #include <asm/arch/fpga_manager.h> #include <asm/arch/reset_manager.h>@@ -10,8 +9,11 @@ #include <asm/arch/sdram.h> #include <asm/arch/misc.h> #include <altera.h> +#include <asm/arch/pinmux.h> #include <common.h> +#include <dm/ofnode.h> #include <errno.h> +#include <fs_loader.h> #include <wait_bit.h> #include <watchdog.h>drivers/fpga/socfpga_arria10.c +3
-0@@ -21,6 +23,9 @@ #define COMPRESSION_OFFSET 229 #define FPGA_TIMEOUT_MSEC 1000 /* timeout in ms */ #define FPGA_TIMEOUT_CNT 0x1000000 +#define DEFAULT_DDR_LOAD_ADDRESS 0x400 + +DECLARE_GLOBAL_DATA_PTR ;
static const structsocfpga_fpga_manager*fpga_manager_base= (void *)SOCFPGA_FPGAMGRREGS_ADDRESS;drivers/fpga/socfpga_arria10.c +0
-0@@ -448,13 +453,461 @@ int fpgamgr_program_finish(void) return 0; }
-/*
- * FPGA Manager to program the FPGA. This is the interface used by FPGA driver.
- * Return 0 for sucess, non-zero for error.
- */drivers/fpga/socfpga_arria10.c +3
-0+ofnode get_fpga_mgr_ofnode (ofnode from) +{ + return ofnode_by_compatible(from, "altr,socfpga-a10-fpga-mgr");
drivers/fpga/socfpga_arria10.c +28
-0+} + +const char *get_fpga_filename (void ) +{ +const char *fpga_filename =NULL ; + +ofnode fpgamgr_node =get_fpga_mgr_ofnode (ofnode_null ()); + +if (ofnode_valid (fpgamgr_node)) + fpga_filename =ofnode_read_string (fpgamgr_node, +"altr,bitstream" ); + +return fpga_filename; +} + +static void get_rbf_image_info (struct rbf_info *rbf,u16 *buffer) +{ +/* +* Magic ID starting at: +* -> 1st dword[15:0] in periph.rbf +* -> 2nd dword[15:0] in core.rbf +* Note: dword == 32 bits +*/ +u32 word_reading_max =2 ; +u32 i; + +for (i =0 ; i < word_reading_max; i++) { + if (*(buffer + i) ==
FPGA_SOCFPGA_A10_RBF_UNENCRYPTED) {drivers/fpga/socfpga_arria10.c +2
-0+ rbf->security = unencrypted; + } else if (*(buffer + i) ==
FPGA_SOCFPGA_A10_RBF_ENCRYPTED) {drivers/fpga/socfpga_arria10.c +3
-0+ rbf->security = encrypted; + }else if (*(buffer + i +1 ) == +FPGA_SOCFPGA_A10_RBF_UNENCRYPTED ){
drivers/fpga/socfpga_arria10.c +12
-0+ rbf->security = unencrypted; + }else if (*(buffer + i +1 ) == +FPGA_SOCFPGA_A10_RBF_ENCRYPTED ) { + rbf->security = encrypted; + }else { + rbf->security = invalid; +continue ; + } + +/* PERIPH RBF(buffer + i + 1), CORE RBF(buffer + i +2) */ + if (*(buffer + i + 1) ==
FPGA_SOCFPGA_A10_RBF_PERIPH) {drivers/fpga/socfpga_arria10.c +3
-0+ rbf->section = periph_section; +break ; + } else if (*(buffer + i + 1) ==
FPGA_SOCFPGA_A10_RBF_CORE) {drivers/fpga/socfpga_arria10.c +3
-0+ rbf->section = core_section; +break ; + } else if (*(buffer + i + 2) ==
FPGA_SOCFPGA_A10_RBF_PERIPH) {drivers/fpga/socfpga_arria10.c +3
-0+ rbf->section = periph_section; +break ; + } else if (*(buffer + i + 2) ==
FPGA_SOCFPGA_A10_RBF_CORE) {drivers/fpga/socfpga_arria10.c +14
-0+ rbf->section = core_section; +break ; + } + + rbf->section = unknown; +break ; + +WATCHDOG_RESET (); + } +} + +#ifdef CONFIG_FS_LOADER +static int first_loading_rbf_to_buffer (struct udevice *dev, + struct fpga_loadfs_info
*fpga_loadfs,drivers/fpga/socfpga_arria10.c +7
-0+ u32 *buffer, size_t *buffer_bsize) +{ +u32 *buffer_p = (u32 *)*buffer; +u32 *loadable = buffer_p; +size_t buffer_size = *buffer_bsize; +size_t fit_size; + int ret, i, count, confs_noffset, images_noffset,
rbf_offset,rbf_size;drivers/fpga/socfpga_arria10.c +6
-0+const char *fpga_node_name =NULL ; +const char *uname =NULL ; + +/* Load image header into buffer */ + ret = request_firmware_into_buf(dev, + fpga_loadfs->fpga_fsinfo-Quoted 1 line
filename,
drivers/fpga/socfpga_arria10.c +1
-0+ buffer_p, sizeof(struct
image_header),drivers/fpga/socfpga_arria10.c +3
-0+ 0); +if (ret <0 ) { + debug("FPGA: Failed to read image header fromflash.\n");
drivers/fpga/socfpga_arria10.c +4
-0+return -ENOENT ; + } + + if (image_get_magic((struct image_header *)buffer_p) !=
FDT_MAGIC) {drivers/fpga/socfpga_arria10.c +8
-0+debug ("FPGA: No FDT magic was found.\n" ); +return -EBADF ; + } + + fit_size =fdt_totalsize (buffer_p); + +if (fit_size > buffer_size) { + debug("FPGA: FIT image is larger than availablebuffer.\n");
drivers/fpga/socfpga_arria10.c +1
-0+ debug("Please use FIT external data or increasingbuffer.\n");
drivers/fpga/socfpga_arria10.c +6
-0+return -ENOMEM ; + } + +/* Load entire FIT into buffer */ + ret = request_firmware_into_buf(dev, + fpga_loadfs->fpga_fsinfo-Quoted 1 line
filename,
drivers/fpga/socfpga_arria10.c +12
-0+ buffer_p, fit_size, 0); +if (ret <0 ) +return ret; + + ret =fit_check_format (buffer_p); +if (!ret) { +debug ("FPGA: No valid FIT image was found.\n" ); +return -EBADF ; + } + + confs_noffset =fdt_path_offset (buffer_p,FIT_CONFS_PATH ); + images_noffset = fdt_path_offset(buffer_p,
FIT_IMAGES_PATH);drivers/fpga/socfpga_arria10.c +2
-0+if (confs_noffset <0 || images_noffset <0 ) { + debug("FPGA: No Configurations or images nodeswere found.\n");
drivers/fpga/socfpga_arria10.c +4
-0+return -ENOENT ; + } + +/* Get default configuration unit name from default property */
drivers/fpga/socfpga_arria10.c +3
-0+ confs_noffset =fit_conf_get_node (buffer_p,NULL ); +if (confs_noffset <0 ) { + debug("FPGA: No default configuration was found inconfig.\n");
drivers/fpga/socfpga_arria10.c +4
-0+return -ENOENT ; + } + + count = fit_conf_get_prop_node_count(buffer_p,
confs_noffset,drivers/fpga/socfpga_arria10.c +3
-0+ FIT_FPGA_PROP); +if (count <0 ) { + debug("FPGA: Invalid configuration format for FPGAnode.\n");
drivers/fpga/socfpga_arria10.c +6
-0+return count; + } +debug ("FPGA: FPGA node count: %d\n" , count); + +for (i =0 ; i < count; i++) { + images_noffset =fit_conf_get_prop_node_index(buffer_p,
drivers/fpga/socfpga_arria10.c +1
-0+ confs
_noffset,drivers/fpga/socfpga_arria10.c +1
-0+ FIT_F
PGA_PROP, i);drivers/fpga/socfpga_arria10.c +1
-0+ uname = fit_get_name(buffer_p, images_noffset,NULL);
drivers/fpga/socfpga_arria10.c +9
-0+if (uname) { +debug ("FPGA: %s\n" , uname); + +if (strstr (uname,"fpga-periph" ) && + (!is_fpgamgr_early_user_mode () || +is_fpgamgr_user_mode ())) { + fpga_node_name = uname; +printf ("FPGA: Start to program " ); + printf("peripheral/full bitstream...\n");
drivers/fpga/socfpga_arria10.c +3
-0+break ; + } else if (strstr(uname, "fpga-core") && + (is_fpgamgr_early_user_mod
e()&&drivers/fpga/socfpga_arria10.c +1
-0+ !is_fpgamgr_user_mode())){
drivers/fpga/socfpga_arria10.c +2
-0+ fpga_node_name = uname; + printf("FPGA: Start to programcore ");
drivers/fpga/socfpga_arria10.c +9
-0+printf ("bitstream ...\n" ); +break ; + } + } +WATCHDOG_RESET (); + } + +if (!fpga_node_name) { + debug("FPGA: No suitable bitstream was found,count: %d.\n", i);
drivers/fpga/socfpga_arria10.c +4
-0+return 1 ; + } + + images_noffset = fit_image_get_node(buffer_p,
fpga_node_name);drivers/fpga/socfpga_arria10.c +10
-0+if (images_noffset <0 ) { +debug ("FPGA: No node '%s' was found in FIT.\n" , + fpga_node_name); +return -ENOENT ; + } + +if (!fit_image_get_data_position (buffer_p, images_noffset, + &rbf_offset)) { +debug ("FPGA: Data position was found.\n" ); + } else if (!fit_image_get_data_offset(buffer_p,
images_noffset,drivers/fpga/socfpga_arria10.c +7
-0+ &rbf_offset)) { +/* +* For FIT with external data, figure out where +* the external images start. This is the base +* for the data-offset properties in each image. +*/ + rbf_offset += ((fdt_totalsize(buffer_p) + 3) &~3);
drivers/fpga/socfpga_arria10.c +3
-0+debug ("FPGA: Data offset was found.\n" ); + }else { + debug("FPGA: No data position/offset wasfound.\n");
drivers/fpga/socfpga_arria10.c +4
-0+return -ENOENT ; + } + + ret = fit_image_get_data_size(buffer_p, images_noffset,
&rbf_size);drivers/fpga/socfpga_arria10.c +2
-0+if (ret <0 ) { + debug("FPGA: No data size was found (err=%d).\n",ret);
drivers/fpga/socfpga_arria10.c +5
-0+return -ENOENT ; + } + +if (gd->ram_size < rbf_size) { + debug("FPGA: Using default OCRAM buffer andsize.\n");
drivers/fpga/socfpga_arria10.c +5
-0+ }else { + ret =fit_image_get_load (buffer_p, images_noffset, + (ulong *)loadable); +if (ret <0 ) { + buffer_p = (u32*)DEFAULT_DDR_LOAD_ADDRESS;
drivers/fpga/socfpga_arria10.c +2
-0+debug ("FPGA: No loadable was found.\n" ); + debug("FPGA: Using default DDR loadaddress: 0x%x .\n",
drivers/fpga/socfpga_arria10.c +4
-0+ DEFAULT_DDR_LOAD_ADDRESS); + }else { + buffer_p = (u32 *)*loadable; + debug("FPGA: Found loadable address =0x%x.\n",
drivers/fpga/socfpga_arria10.c +7
-0+ *loadable); + } + + buffer_size = rbf_size; + } + + debug("FPGA: External data: offset = 0x%x, size =0x%x.\n",
drivers/fpga/socfpga_arria10.c +6
-0+ rbf_offset, rbf_size); + + fpga_loadfs->remaining = rbf_size; + +/* +* Determine buffer size vs bitstream size, and calculating number of
drivers/fpga/socfpga_arria10.c +1
-0+ * chunk by chunk transfer is required due to smallerbuffer size
drivers/fpga/socfpga_arria10.c +14
-0+* compare to bitstream +*/ +if (rbf_size <= buffer_size) { +/* Loading whole bitstream into buffer */ + buffer_size = rbf_size; + fpga_loadfs->remaining =0 ; + }else { + fpga_loadfs->remaining -= buffer_size; + } + + fpga_loadfs->offset = rbf_offset; +/* Loading bitstream into buffer */ + ret = request_firmware_into_buf(dev, + fpga_loadfs->fpga_fsinfo-Quoted 1 line
filename,
drivers/fpga/socfpga_arria10.c +4
-0+ buffer_p, buffer_size, + fpga_loadfs->offset); +if (ret <0 ) { + debug("FPGA: Failed to read bitstream fromflash.\n");
drivers/fpga/socfpga_arria10.c +5
-0+return -ENOENT ; + } + +/* Getting info about bitstream types */ + get_rbf_image_info(&fpga_loadfs->rbfinfo, (u16*)buffer_p);
drivers/fpga/socfpga_arria10.c +8
-0+ +/* Update next reading bitstream offset */ + fpga_loadfs->offset += buffer_size; + +/* Update the final addr for bitstream */ + *buffer = (u32 )buffer_p; + +/* Update the size of bitstream to be programmed into FPGA */
drivers/fpga/socfpga_arria10.c +7
-0+ *buffer_bsize = buffer_size; + +return 0 ; +} + +static int subsequent_loading_rbf_to_buffer (struct udevice *dev, + struct fpga_loadfs_info
*fpga_loadfs,drivers/fpga/socfpga_arria10.c +1
-0+u32 *buffer, size_t
*buffer_bsize)drivers/fpga/socfpga_arria10.c +14
-0+{ +int ret =0 ; +u32 *buffer_p = (u32 *)*buffer; + +/* Read the bitstream chunk by chunk. */ +if (fpga_loadfs->remaining > *buffer_bsize) { + fpga_loadfs->remaining -= *buffer_bsize; + }else { + *buffer_bsize = fpga_loadfs->remaining; + fpga_loadfs->remaining =0 ; + } + + ret = request_firmware_into_buf(dev, + fpga_loadfs->fpga_fsinfo-Quoted 1 line
filename,
drivers/fpga/socfpga_arria10.c +4
-0+ buffer_p, *buffer_bsize, + fpga_loadfs->offset); +if (ret <0 ) { + debug("FPGA: Failed to read bitstream fromflash.\n");
drivers/fpga/socfpga_arria10.c +10
-0+return -ENOENT ; + } + +/* Update next reading bitstream offset */ + fpga_loadfs->offset += *buffer_bsize; + +return 0 ; +} + +int socfpga_loadfs(fpga_fs_info *fpga_fsinfo, const void *buf,
size_tbsize,drivers/fpga/socfpga_arria10.c +17
-0+ u32 offset) +{ +struct fpga_loadfs_info fpga_loadfs; +struct udevice *dev; +int status, ret, size; +u32 buffer = (uintptr_t )buf; +size_t buffer_sizebytes = bsize; +size_t buffer_sizebytes_ori = bsize; +size_t total_sizeof_image =0 ; +ofnode node; +const fdt32_t *phandle_p; +u32 phandle; + + node =get_fpga_mgr_ofnode (ofnode_null ()); + +if (ofnode_valid (node)) { + phandle_p = ofnode_get_property(node, "firmware-loader", &size);
drivers/fpga/socfpga_arria10.c +4
-0+if (!phandle_p) { + node =ofnode_path ("/chosen" ); +if (!ofnode_valid (node)) { + debug("FPGA: /chosen node was notfound.\n");
drivers/fpga/socfpga_arria10.c +4
-0+return -ENOENT ; + } + + phandle_p = ofnode_get_property(node,"firmware-loader",
drivers/fpga/socfpga_arria10.c +3
-0+ &size); +if (!phandle_p) { + debug("FPGA: firmware-loaderproperty was not");
drivers/fpga/socfpga_arria10.c +11
-0+debug (" found.\n" ); +return -ENOENT ; + } + } + }else { +debug ("FPGA: FPGA manager node was not found.\n" ); +return -ENOENT ; + } + + phandle =fdt32_to_cpu (*phandle_p); + ret =uclass_get_device_by_phandle_id(UCLASS_FS_FIRMWARE_LOADER,
drivers/fpga/socfpga_arria10.c +13
-0+ phandle, &dev); +if (ret) +return ret; + +memset (&fpga_loadfs,0 ,sizeof (fpga_loadfs)); + + fpga_loadfs.fpga_fsinfo = fpga_fsinfo; + fpga_loadfs.offset = offset; + +printf ("FPGA: Checking FPGA configuration setting ...\n" ); + +/* +* Note: Both buffer and buffer_sizebytes values can be altered by
drivers/fpga/socfpga_arria10.c +3
-0+* function below. +*/ + ret = first_loading_rbf_to_buffer(dev, &fpga_loadfs,&buffer,
drivers/fpga/socfpga_arria10.c +10
-0+ &buffer_sizebytes); +if (ret ==1 ) { +printf ("FPGA: Skipping configuration ...\n" ); +return 0 ; + }else if (ret) { +return ret; + } + + if (fpga_loadfs.rbfinfo.section == core_section && + !(is_fpgamgr_early_user_mode() &&!is_fpgamgr_user_mode())) {
drivers/fpga/socfpga_arria10.c +1
-0+ debug("FPGA : Must be in Early Release mode toprogram ");
drivers/fpga/socfpga_arria10.c +5
-0+debug ("core bitstream.\n" ); +return -EPERM ; + } + +/* Disable all signals from HPS peripheral controller to FPGA */
drivers/fpga/socfpga_arria10.c +3
-0+writel (0 , &system_manager_base->fpgaintf_en_global); + +/* Disable all axi bridges (hps2fpga, lwhps2fpga & fpga2hps) */
drivers/fpga/socfpga_arria10.c +5
-0+socfpga_bridges_reset (); + +if (fpga_loadfs.rbfinfo.section == periph_section) { +/* Initialize the FPGA Manager */ + status = fpgamgr_program_init((u32 *)buffer,
buffer_sizebytes);drivers/fpga/socfpga_arria10.c +2
-0+if (status) { + debug("FPGA: Init with peripheralbitstream failed.\n");
drivers/fpga/socfpga_arria10.c +12
-0+return -EPERM ; + } + } + +/* Transfer bitstream to FPGA Manager */ +fpgamgr_program_write ((void *)buffer, buffer_sizebytes); + + total_sizeof_image += buffer_sizebytes; + +while (fpga_loadfs.remaining) { + ret =subsequent_loading_rbf_to_buffer (dev, + &fpga_loadfs,
drivers/fpga/socfpga_arria10.c +2
-0+ &buffer, + &buffer_si
zebytes_ori);drivers/fpga/socfpga_arria10.c +15
-0+ +if (ret) +return ret; + +/* Transfer data to FPGA Manager */ +fpgamgr_program_write ((void *)buffer, + buffer_sizebytes_ori); + + total_sizeof_image += buffer_sizebytes_ori; + +WATCHDOG_RESET (); + } + +if (fpga_loadfs.rbfinfo.section == periph_section) { +if (fpgamgr_wait_early_user_mode () != -ETIMEDOUT ){
drivers/fpga/socfpga_arria10.c +4
-0+config_pins (gd->fdt_blob,"shared" ); +puts ("FPGA: Early Release Succeeded.\n" ); + }else { + debug("FPGA: Failed to see EarlyRelease.\n");
drivers/fpga/socfpga_arria10.c +23
-0+return -EIO ; + } + +/* For monolithic bitstream */ +if (is_fpgamgr_user_mode ()) { +/* Ensure the FPGA entering config done */ + status =fpgamgr_program_finish (); +if (status) +return status; + +config_pins (gd->fdt_blob,"fpga" ); +puts ("FPGA: Enter user mode.\n" ); + } + }else if (fpga_loadfs.rbfinfo.section == core_section) { +/* Ensure the FPGA entering config done */ + status =fpgamgr_program_finish (); +if (status) +return status; + +config_pins (gd->fdt_blob,"fpga" ); +puts ("FPGA: Enter user mode.\n" ); + }else { + debug("FPGA: Config Error: Unsupported bitstreamtype.\n");
drivers/fpga/socfpga_arria10.c +18
-0+ return -ENOEXEC; + } + +return (int )total_sizeof_image; +} + +void fpgamgr_program (const void *buf,size_t bsize,u32 offset) +{ +fpga_fs_info fpga_fsinfo; + + fpga_fsinfo.filename =get_fpga_filename (); + +if (fpga_fsinfo.filename) +socfpga_loadfs (&fpga_fsinfo, buf, bsize, offset); +} +#endif + +/* This function is used to load the core bitstream from the OCRAM. */
intsocfpga_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size)
{drivers/fpga/socfpga_arria10.c +4
-1-int status; +unsigned long status; +struct rbf_info rbfinfo; + +memset (&rbfinfo,0 ,sizeof (rbfinfo));
/* Disable all signals from hps peripheral controller to fpga */
writel(0, &system_manager_base->fpgaintf_en_global);drivers/fpga/socfpga_arria10.c +0
-0@@ -462,13 +915,31 @@ int socfpga_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size) /* Disable all axi bridge (hps2fpga, lwhps2fpga &fpga2hps) */
socfpga_bridges_reset();drivers/fpga/socfpga_arria10.c +6
-4-/* Initialize the FPGA Manager */ - status =fpgamgr_program_init ((u32 *)rbf_data, rbf_size); -if (status) -return status; +/* Getting info about bitstream types */ +get_rbf_image_info (&rbfinfo, (u16 *)rbf_data); + +if (rbfinfo.section == periph_section) { +/* Initialize the FPGA Manager */ + status = fpgamgr_program_init((u32 *)rbf_data,
rbf_size);drivers/fpga/socfpga_arria10.c +3
-0+if (status) +return status; + }drivers/fpga/socfpga_arria10.c +2
-1-/* Write the RBF data to FPGA Manager */ + if (rbfinfo.section == core_section && + !(is_fpgamgr_early_user_mode() &&!is_fpgamgr_user_mode())) {
drivers/fpga/socfpga_arria10.c +1
-0+ debug("FPGA : Must be in early release mode toprogram ");
drivers/fpga/socfpga_arria10.c +5
-0+debug ("core bitstream.\n" ); +return -EPERM ; + } + +/* Write the bitstream to FPGA Manager */
fpgamgr_program_write(rbf_data, rbf_size);drivers/fpga/socfpga_arria10.c +7
-1-return fpgamgr_program_finish (); + status =fpgamgr_program_finish (); +if (status) { +config_pins (gd->fdt_blob,"fpga" ); +puts ("FPGA: Enter user mode.\n" ); + } + +return status;}
include/image.h +0
-0@@ -1046,6 +1046,10 @@ int fit_check_format(const void *fit);
intfit_conf_find_compat(const void *fit, const void *fdt); intfit_conf_get_node(const void *fit, const char *conf_uname);include/image.h +4
-0+int fit_conf_get_prop_node_count (const void *fit,int noffset, +const char *prop_name); +int fit_conf_get_prop_node_index (const void *fit,int noffset, +const char *prop_name,int index);
/**
*fit_conf_get_prop_node()- Get node refered to by a configuration
PATCH v12 5/9 ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Quoted 32 lines · Tien Fong
Quoted 23 lines · Simon Goldschmidt
Quoted 21 lines · tien.fong.chee at intel.com
From: Tien Fong Chee <[email protected]>
Add FPGA driver to support program FPGA with FPGA bitstream loading from
filesystem. The driver are designed based on generic firmware loader
framework. The driver can handle FPGA program operation from loading FPGA
bitstream in flash to memory and then to program FPGA.Signed-off-by Tien Fong Chee <[email protected]>---
changes for v12
- No changes.changes for v11
- No changes.Quoted 6 lines
Review
Quoted 4 lines
changes for v10
(quoted diff) +0
-3-Cleaned up the codes. -Return -EPERM when programing core on non early IO release mode. > -Using live function to get rid of gd->You got rid of gd-> in v10? How come I see numerous references to it below?
Quoted 2 lines
get rid of using
gd->fdt_blobfor finding thenode_offset. Details in https://patchwork.ozlabs.org/patch/1044415/
Ah, ok. But still, here you're introducing yet more references to gd->fdt_blob. That wouldn't work with a live tree, either, or would it?
Regards,
Simon
Quoted 796 lines
-/*
- * FPGA Manager to program the FPGA. This is the interface used by FPGA driver.
- * Return 0 for sucess, non-zero for error.
- */(quoted diff) +5
-0+ofnode get_fpga_mgr_ofnode(void) +{ + int node_offset; + + fdtdec_find_aliases_for_id(gd->fdt_blob, "fpga_mgr",nit: using of live functions would be better to get rid of gd->.
(quoted diff) +2
-0+ COMPAT_ALTERA_SOCFPGA_FPGA0, + &node_offset, 1);Thanks.
Quoted 778 lines
Quoted 778 lines
-Removed @0 for fs-loader node
changes for v9
- Support data offset
- Added default DDR load address
- Squashed theimage.h
- Changed to phandle
- Ensure the DDR is fully up running by checking thegd->ramchanges for v8
- Added codes to discern bitstream type based on fpga node name.changes for v7
- Restructure the FPGA driver to support both peripheral bitstream and core
bitstream bundled into FIT image.
- Support loadable property for core bitstream. User can set loadable
in DDR for better performance. This loading would be done in one
large
chunk instead of chunk by chunk loading with small memory
buffer.--- arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts | 17 + .../include/mach/fpga_manager_arria10.h | 39 +- drivers/fpga/socfpga_arria10.c | 497 ++++++++++++++++++++- include/image.h | 4 + 4 files changed, 542 insertions(+), 15 deletions(-)arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts +17
-0@@ -18,6 +18,23 @@ /dts-v1/; #include "socfpga_arria10_socdk.dtsi" +/ { + chosen { + firmware-loader = <&fs_loader0>; + }; + + fs_loader0: fs-loader { + u-boot,dm-pre-reloc; + compatible = "u-boot,fs-loader"; + phandlepart = <&mmc 1>; + }; +}; + +&fpga_mgr { + u-boot,dm-pre-reloc; + altr,bitstream = "fit_spl_fpga.itb"; +}; + &mmc { u-boot,dm-pre-reloc; status = "okay";(quoted diff) +0
-0
socfpga/include/mach/fpga_manager_arria10.hb/arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h
index09d13f6fd3..c5f67714aa100644arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +5
-1@@ -1,9 +1,13 @@/* SPDX-License-Identifier: GPL-2.0 */ /* -* Copyright (C) 2017 Intel Corporation <www.intel.com> +* Copyright (C) 2017-2019 Intel Corporation <www.intel.com> * All rights reserved. */ +#include <asm/cache.h> +#include <altera.h> +#include <image.h> +#ifndef _FPGA_MANAGER_ARRIA10_H_#define _FPGA_MANAGER_ARRIA10_H_@@ -51,6 +55,10 @@#define ALT_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SET_MSK BIT(24)#define ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_LSB 16
arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +32
-1+#define FPGA_SOCFPGA_A10_RBF_UNENCRYPTED 0xa65c +#define FPGA_SOCFPGA_A10_RBF_ENCRYPTED 0xa65d +#define FPGA_SOCFPGA_A10_RBF_PERIPH 0x0001 +#define FPGA_SOCFPGA_A10_RBF_CORE 0x8001#ifndef __ASSEMBLY__ struct socfpga_fpga_manager {@@ -88,12 +96,39 @@ struct socfpga_fpga_manager {u32 imgcfg_fifo_status; }; +enum rbf_type { + unknown, + periph_section, + core_section +}; + +enum rbf_security { + invalid, + unencrypted, + encrypted +}; + +struct rbf_info { +enum rbf_type section; +enum rbf_security security; +}; + +struct fpga_loadfs_info { +fpga_fs_info *fpga_fsinfo; +u32 remaining; +u32 offset; +struct rbf_info rbfinfo; +}; +/* Functions */ int fpgamgr_program_init (u32 * rbf_data,size_t rbf_size);int fpgamgr_program_finish (void );int is_fpgamgr_user_mode (void );int fpgamgr_wait_early_user_mode (void ); - +const char *get_fpga_filename (void ); +int socfpga_loadfs (fpga_fs_info *fpga_fsinfo,const void *buf,size_t bsize, +u32 offset); +void fpgamgr_program (const void *buf,size_t bsize,u32 offset);#endif /* __ASSEMBLY__ */ #endif /* _FPGA_MANAGER_ARRIA10_H_ */drivers/fpga/socfpga_arria10.c +7
-4@@ -1,8 +1,7 @@// SPDX-License-Identifier: GPL-2.0 /* -* Copyright (C) 2017 Intel Corporation <www.intel.com> +* Copyright (C) 2017-2019 Intel Corporation <www.intel.com> */ -#include <asm/io.h> #include <asm/arch/fpga_manager.h> #include <asm/arch/reset_manager.h> @@ -10,8 +9,11 @@#include <asm/arch/sdram.h> #include <asm/arch/misc.h> #include <altera.h> +#include <asm/arch/pinmux.h> #include <common.h> +#include <dm/ofnode.h> #include <errno.h> +#include <fs_loader.h> #include <wait_bit.h> #include <watchdog.h> @@ -21,6 +23,9 @@#define COMPRESSION_OFFSET 229#define FPGA_TIMEOUT_MSEC 1000/* timeout in ms */ #define FPGA_TIMEOUT_CNT 0x1000000 +#define DEFAULT_DDR_LOAD_ADDRESS 0x400 + +DECLARE_GLOBAL_DATA_PTR ;static const struct socfpga_fpga_manager *fpga_manager_base = (void *)SOCFPGA_FPGAMGRREGS_ADDRESS ;@@ -448,13 +453,461 @@ int fpgamgr_program_finish(void)return 0 ; } -/* -* FPGA Manager to program the FPGA. This is the interface used by FPGA driver.
- * Return 0 for sucess, non-zero for error.
- */drivers/fpga/socfpga_arria10.c +3
-0+ofnode get_fpga_mgr_ofnode (ofnode from) +{ + return ofnode_by_compatible(from, "altr,socfpga-a10-fpga-mgr");
drivers/fpga/socfpga_arria10.c +28
-0+} + +const char *get_fpga_filename (void ) +{ +const char *fpga_filename =NULL ; + +ofnode fpgamgr_node =get_fpga_mgr_ofnode (ofnode_null ()); + +if (ofnode_valid (fpgamgr_node)) + fpga_filename =ofnode_read_string (fpgamgr_node, +"altr,bitstream" ); + +return fpga_filename; +} + +static void get_rbf_image_info (struct rbf_info *rbf,u16 *buffer) +{ +/* +* Magic ID starting at: +* -> 1st dword[15:0] in periph.rbf +* -> 2nd dword[15:0] in core.rbf +* Note: dword == 32 bits +*/ +u32 word_reading_max =2 ; +u32 i; + +for (i =0 ; i < word_reading_max; i++) { + if (*(buffer + i) ==
FPGA_SOCFPGA_A10_RBF_UNENCRYPTED) {drivers/fpga/socfpga_arria10.c +2
-0+ rbf->security = unencrypted; + } else if (*(buffer + i) ==
FPGA_SOCFPGA_A10_RBF_ENCRYPTED) {drivers/fpga/socfpga_arria10.c +3
-0+ rbf->security = encrypted; + }else if (*(buffer + i +1 ) == +FPGA_SOCFPGA_A10_RBF_UNENCRYPTED ){
drivers/fpga/socfpga_arria10.c +12
-0+ rbf->security = unencrypted; + }else if (*(buffer + i +1 ) == +FPGA_SOCFPGA_A10_RBF_ENCRYPTED ) { + rbf->security = encrypted; + }else { + rbf->security = invalid; +continue ; + } + +/* PERIPH RBF(buffer + i + 1), CORE RBF(buffer + i +2) */ + if (*(buffer + i + 1) ==
FPGA_SOCFPGA_A10_RBF_PERIPH) {drivers/fpga/socfpga_arria10.c +3
-0+ rbf->section = periph_section; +break ; + } else if (*(buffer + i + 1) ==
FPGA_SOCFPGA_A10_RBF_CORE) {drivers/fpga/socfpga_arria10.c +3
-0+ rbf->section = core_section; +break ; + } else if (*(buffer + i + 2) ==
FPGA_SOCFPGA_A10_RBF_PERIPH) {drivers/fpga/socfpga_arria10.c +3
-0+ rbf->section = periph_section; +break ; + } else if (*(buffer + i + 2) ==
FPGA_SOCFPGA_A10_RBF_CORE) {drivers/fpga/socfpga_arria10.c +14
-0+ rbf->section = core_section; +break ; + } + + rbf->section = unknown; +break ; + +WATCHDOG_RESET (); + } +} + +#ifdef CONFIG_FS_LOADER +static int first_loading_rbf_to_buffer (struct udevice *dev, + struct fpga_loadfs_info
*fpga_loadfs,drivers/fpga/socfpga_arria10.c +7
-0+ u32 *buffer, size_t *buffer_bsize) +{ +u32 *buffer_p = (u32 *)*buffer; +u32 *loadable = buffer_p; +size_t buffer_size = *buffer_bsize; +size_t fit_size; + int ret, i, count, confs_noffset, images_noffset,
rbf_offset,rbf_size;drivers/fpga/socfpga_arria10.c +6
-0+const char *fpga_node_name =NULL ; +const char *uname =NULL ; + +/* Load image header into buffer */ + ret = request_firmware_into_buf(dev, + fpga_loadfs->fpga_fsinfo-Quoted 1 line
filename,
+
buffer_p, sizeof(structimage_header),drivers/fpga/socfpga_arria10.c +3
-0+ 0); +if (ret <0 ) { + debug("FPGA: Failed to read image header fromflash.\n");
drivers/fpga/socfpga_arria10.c +4
-0+return -ENOENT ; + } + + if (image_get_magic((struct image_header *)buffer_p) !=
FDT_MAGIC) {drivers/fpga/socfpga_arria10.c +8
-0+debug ("FPGA: No FDT magic was found.\n" ); +return -EBADF ; + } + + fit_size =fdt_totalsize (buffer_p); + +if (fit_size > buffer_size) { + debug("FPGA: FIT image is larger than availablebuffer.\n");
+ debug("Please use FIT external data or increasing
buffer.\n");drivers/fpga/socfpga_arria10.c +6
-0+return -ENOMEM ; + } + +/* Load entire FIT into buffer */ + ret = request_firmware_into_buf(dev, + fpga_loadfs->fpga_fsinfo-Quoted 1 line
filename,
drivers/fpga/socfpga_arria10.c +12
-0+ buffer_p, fit_size, 0); +if (ret <0 ) +return ret; + + ret =fit_check_format (buffer_p); +if (!ret) { +debug ("FPGA: No valid FIT image was found.\n" ); +return -EBADF ; + } + + confs_noffset =fdt_path_offset (buffer_p,FIT_CONFS_PATH ); + images_noffset = fdt_path_offset(buffer_p,
FIT_IMAGES_PATH);drivers/fpga/socfpga_arria10.c +2
-0+if (confs_noffset <0 || images_noffset <0 ) { + debug("FPGA: No Configurations or images nodeswere found.\n");
drivers/fpga/socfpga_arria10.c +4
-0+return -ENOENT ; + } + +/* Get default configuration unit name from default property */
drivers/fpga/socfpga_arria10.c +3
-0+ confs_noffset =fit_conf_get_node (buffer_p,NULL ); +if (confs_noffset <0 ) { + debug("FPGA: No default configuration was found inconfig.\n");
drivers/fpga/socfpga_arria10.c +4
-0+return -ENOENT ; + } + + count = fit_conf_get_prop_node_count(buffer_p,
confs_noffset,drivers/fpga/socfpga_arria10.c +3
-0+ FIT_FPGA_PROP); +if (count <0 ) { + debug("FPGA: Invalid configuration format for FPGAnode.\n");
drivers/fpga/socfpga_arria10.c +6
-0+return count; + } +debug ("FPGA: FPGA node count: %d\n" , count); + +for (i =0 ; i < count; i++) { + images_noffset =fit_conf_get_prop_node_index(buffer_p,
+ confs_noffset,
+FIT_FPGA_PROP, i);
+ uname = fit_get_name(buffer_p,images_noffset,
NULL);drivers/fpga/socfpga_arria10.c +9
-0+if (uname) { +debug ("FPGA: %s\n" , uname); + +if (strstr (uname,"fpga-periph" ) && + (!is_fpgamgr_early_user_mode () || +is_fpgamgr_user_mode ())) { + fpga_node_name = uname; +printf ("FPGA: Start to program " ); + printf("peripheral/full bitstream...\n");
drivers/fpga/socfpga_arria10.c +3
-0+break ; + } else if (strstr(uname, "fpga-core") && + (is_fpgamgr_early_user_mod
e()&&
+ !is_fpgamgr_user_mode()))
{drivers/fpga/socfpga_arria10.c +2
-0+ fpga_node_name = uname; + printf("FPGA: Start to programcore ");
drivers/fpga/socfpga_arria10.c +9
-0+printf ("bitstream ...\n" ); +break ; + } + } +WATCHDOG_RESET (); + } + +if (!fpga_node_name) { + debug("FPGA: No suitable bitstream was found,count: %d.\n", i);
drivers/fpga/socfpga_arria10.c +4
-0+return 1 ; + } + + images_noffset = fit_image_get_node(buffer_p,
fpga_node_name);drivers/fpga/socfpga_arria10.c +10
-0+if (images_noffset <0 ) { +debug ("FPGA: No node '%s' was found in FIT.\n" , + fpga_node_name); +return -ENOENT ; + } + +if (!fit_image_get_data_position (buffer_p, images_noffset, + &rbf_offset)) { +debug ("FPGA: Data position was found.\n" ); + } else if (!fit_image_get_data_offset(buffer_p,
images_noffset,drivers/fpga/socfpga_arria10.c +7
-0+ &rbf_offset)) { +/* +* For FIT with external data, figure out where +* the external images start. This is the base +* for the data-offset properties in each image. +*/ + rbf_offset += ((fdt_totalsize(buffer_p) + 3) &~3);
drivers/fpga/socfpga_arria10.c +3
-0+debug ("FPGA: Data offset was found.\n" ); + }else { + debug("FPGA: No data position/offset wasfound.\n");
drivers/fpga/socfpga_arria10.c +4
-0+return -ENOENT ; + } + + ret = fit_image_get_data_size(buffer_p, images_noffset,
&rbf_size);drivers/fpga/socfpga_arria10.c +2
-0+if (ret <0 ) { + debug("FPGA: No data size was found (err=%d).\n",ret);
drivers/fpga/socfpga_arria10.c +5
-0+return -ENOENT ; + } + +if (gd->ram_size < rbf_size) { + debug("FPGA: Using default OCRAM buffer andsize.\n");
drivers/fpga/socfpga_arria10.c +5
-0+ }else { + ret =fit_image_get_load (buffer_p, images_noffset, + (ulong *)loadable); +if (ret <0 ) { + buffer_p = (u32*)DEFAULT_DDR_LOAD_ADDRESS;
drivers/fpga/socfpga_arria10.c +2
-0+debug ("FPGA: No loadable was found.\n" ); + debug("FPGA: Using default DDR loadaddress: 0x%x .\n",
drivers/fpga/socfpga_arria10.c +4
-0+ DEFAULT_DDR_LOAD_ADDRESS); + }else { + buffer_p = (u32 *)*loadable; + debug("FPGA: Found loadable address =0x%x.\n",
drivers/fpga/socfpga_arria10.c +7
-0+ *loadable); + } + + buffer_size = rbf_size; + } + + debug("FPGA: External data: offset = 0x%x, size =0x%x.\n",
drivers/fpga/socfpga_arria10.c +6
-0+ rbf_offset, rbf_size); + + fpga_loadfs->remaining = rbf_size; + +/* +* Determine buffer size vs bitstream size, and calculating number of
+ * chunk by chunk transfer is required due to smaller
buffer sizedrivers/fpga/socfpga_arria10.c +14
-0+* compare to bitstream +*/ +if (rbf_size <= buffer_size) { +/* Loading whole bitstream into buffer */ + buffer_size = rbf_size; + fpga_loadfs->remaining =0 ; + }else { + fpga_loadfs->remaining -= buffer_size; + } + + fpga_loadfs->offset = rbf_offset; +/* Loading bitstream into buffer */ + ret = request_firmware_into_buf(dev, + fpga_loadfs->fpga_fsinfo-Quoted 1 line
filename,
drivers/fpga/socfpga_arria10.c +4
-0+ buffer_p, buffer_size, + fpga_loadfs->offset); +if (ret <0 ) { + debug("FPGA: Failed to read bitstream fromflash.\n");
drivers/fpga/socfpga_arria10.c +5
-0+return -ENOENT ; + } + +/* Getting info about bitstream types */ + get_rbf_image_info(&fpga_loadfs->rbfinfo, (u16*)buffer_p);
drivers/fpga/socfpga_arria10.c +8
-0+ +/* Update next reading bitstream offset */ + fpga_loadfs->offset += buffer_size; + +/* Update the final addr for bitstream */ + *buffer = (u32 )buffer_p; + +/* Update the size of bitstream to be programmed into FPGA */
drivers/fpga/socfpga_arria10.c +7
-0+ *buffer_bsize = buffer_size; + +return 0 ; +} + +static int subsequent_loading_rbf_to_buffer (struct udevice *dev, + struct fpga_loadfs_info
*fpga_loadfs,
+ u32 *buffer,size_t*buffer_bsize)drivers/fpga/socfpga_arria10.c +14
-0+{ +int ret =0 ; +u32 *buffer_p = (u32 *)*buffer; + +/* Read the bitstream chunk by chunk. */ +if (fpga_loadfs->remaining > *buffer_bsize) { + fpga_loadfs->remaining -= *buffer_bsize; + }else { + *buffer_bsize = fpga_loadfs->remaining; + fpga_loadfs->remaining =0 ; + } + + ret = request_firmware_into_buf(dev, + fpga_loadfs->fpga_fsinfo-Quoted 1 line
filename,
drivers/fpga/socfpga_arria10.c +4
-0+ buffer_p, *buffer_bsize, + fpga_loadfs->offset); +if (ret <0 ) { + debug("FPGA: Failed to read bitstream fromflash.\n");
drivers/fpga/socfpga_arria10.c +10
-0+return -ENOENT ; + } + +/* Update next reading bitstream offset */ + fpga_loadfs->offset += *buffer_bsize; + +return 0 ; +} + +int socfpga_loadfs(fpga_fs_info *fpga_fsinfo, const void *buf,
size_tbsize,drivers/fpga/socfpga_arria10.c +17
-0+ u32 offset) +{ +struct fpga_loadfs_info fpga_loadfs; +struct udevice *dev; +int status, ret, size; +u32 buffer = (uintptr_t )buf; +size_t buffer_sizebytes = bsize; +size_t buffer_sizebytes_ori = bsize; +size_t total_sizeof_image =0 ; +ofnode node; +const fdt32_t *phandle_p; +u32 phandle; + + node =get_fpga_mgr_ofnode (ofnode_null ()); + +if (ofnode_valid (node)) { + phandle_p = ofnode_get_property(node, "firmware-loader", &size);
drivers/fpga/socfpga_arria10.c +4
-0+if (!phandle_p) { + node =ofnode_path ("/chosen" ); +if (!ofnode_valid (node)) { + debug("FPGA: /chosen node was notfound.\n");
drivers/fpga/socfpga_arria10.c +4
-0+return -ENOENT ; + } + + phandle_p = ofnode_get_property(node,"firmware-loader",
drivers/fpga/socfpga_arria10.c +3
-0+ &size); +if (!phandle_p) { + debug("FPGA: firmware-loaderproperty was not");
drivers/fpga/socfpga_arria10.c +11
-0+debug (" found.\n" ); +return -ENOENT ; + } + } + }else { +debug ("FPGA: FPGA manager node was not found.\n" ); +return -ENOENT ; + } + + phandle =fdt32_to_cpu (*phandle_p); + ret =uclass_get_device_by_phandle_id(UCLASS_FS_FIRMWARE_LOADER,
drivers/fpga/socfpga_arria10.c +13
-0+ phandle, &dev); +if (ret) +return ret; + +memset (&fpga_loadfs,0 ,sizeof (fpga_loadfs)); + + fpga_loadfs.fpga_fsinfo = fpga_fsinfo; + fpga_loadfs.offset = offset; + +printf ("FPGA: Checking FPGA configuration setting ...\n" ); + +/* +* Note: Both buffer and buffer_sizebytes values can be altered by
drivers/fpga/socfpga_arria10.c +3
-0+* function below. +*/ + ret = first_loading_rbf_to_buffer(dev, &fpga_loadfs,&buffer,
drivers/fpga/socfpga_arria10.c +10
-0+ &buffer_sizebytes); +if (ret ==1 ) { +printf ("FPGA: Skipping configuration ...\n" ); +return 0 ; + }else if (ret) { +return ret; + } + + if (fpga_loadfs.rbfinfo.section == core_section && + !(is_fpgamgr_early_user_mode() &&!is_fpgamgr_user_mode())) {
+ debug("FPGA : Must be in Early Release mode to
program ");drivers/fpga/socfpga_arria10.c +5
-0+debug ("core bitstream.\n" ); +return -EPERM ; + } + +/* Disable all signals from HPS peripheral controller to FPGA */
drivers/fpga/socfpga_arria10.c +3
-0+writel (0 , &system_manager_base->fpgaintf_en_global); + +/* Disable all axi bridges (hps2fpga, lwhps2fpga & fpga2hps) */
drivers/fpga/socfpga_arria10.c +5
-0+socfpga_bridges_reset (); + +if (fpga_loadfs.rbfinfo.section == periph_section) { +/* Initialize the FPGA Manager */ + status = fpgamgr_program_init((u32 *)buffer,
buffer_sizebytes);drivers/fpga/socfpga_arria10.c +2
-0+if (status) { + debug("FPGA: Init with peripheralbitstream failed.\n");
drivers/fpga/socfpga_arria10.c +12
-0+return -EPERM ; + } + } + +/* Transfer bitstream to FPGA Manager */ +fpgamgr_program_write ((void *)buffer, buffer_sizebytes); + + total_sizeof_image += buffer_sizebytes; + +while (fpga_loadfs.remaining) { + ret =subsequent_loading_rbf_to_buffer (dev, + &fpga_loadfs,
drivers/fpga/socfpga_arria10.c +2
-0+ &buffer, + &buffer_si
zebytes_ori);drivers/fpga/socfpga_arria10.c +15
-0+ +if (ret) +return ret; + +/* Transfer data to FPGA Manager */ +fpgamgr_program_write ((void *)buffer, + buffer_sizebytes_ori); + + total_sizeof_image += buffer_sizebytes_ori; + +WATCHDOG_RESET (); + } + +if (fpga_loadfs.rbfinfo.section == periph_section) { +if (fpgamgr_wait_early_user_mode () != -ETIMEDOUT ){
drivers/fpga/socfpga_arria10.c +4
-0+config_pins (gd->fdt_blob,"shared" ); +puts ("FPGA: Early Release Succeeded.\n" ); + }else { + debug("FPGA: Failed to see EarlyRelease.\n");
drivers/fpga/socfpga_arria10.c +23
-0+return -EIO ; + } + +/* For monolithic bitstream */ +if (is_fpgamgr_user_mode ()) { +/* Ensure the FPGA entering config done */ + status =fpgamgr_program_finish (); +if (status) +return status; + +config_pins (gd->fdt_blob,"fpga" ); +puts ("FPGA: Enter user mode.\n" ); + } + }else if (fpga_loadfs.rbfinfo.section == core_section) { +/* Ensure the FPGA entering config done */ + status =fpgamgr_program_finish (); +if (status) +return status; + +config_pins (gd->fdt_blob,"fpga" ); +puts ("FPGA: Enter user mode.\n" ); + }else { + debug("FPGA: Config Error: Unsupported bitstreamtype.\n");
drivers/fpga/socfpga_arria10.c +18
-0+ return -ENOEXEC; + } + +return (int )total_sizeof_image; +} + +void fpgamgr_program (const void *buf,size_t bsize,u32 offset) +{ +fpga_fs_info fpga_fsinfo; + + fpga_fsinfo.filename =get_fpga_filename (); + +if (fpga_fsinfo.filename) +socfpga_loadfs (&fpga_fsinfo, buf, bsize, offset); +} +#endif + +/* This function is used to load the core bitstream from the OCRAM. */
int socfpga_load(Altera_desc *desc, const void*rbf_data,size_trbf_size)
{drivers/fpga/socfpga_arria10.c +4
-1-int status; +unsigned long status; +struct rbf_info rbfinfo; + +memset (&rbfinfo,0 ,sizeof (rbfinfo));/* Disable all signals from hps peripheral controller to fpga */
writel(0, &system_manager_base->fpgaintf_en_global);drivers/fpga/socfpga_arria10.c +0
-0@@ -462,13 +915,31 @@ int socfpga_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size)/* Disable all axi bridge (hps2fpga, lwhps2fpga & fpga2hps) */
socfpga_bridges_reset();drivers/fpga/socfpga_arria10.c +6
-4-/* Initialize the FPGA Manager */ - status =fpgamgr_program_init ((u32 *)rbf_data, rbf_size); -if (status) -return status; +/* Getting info about bitstream types */ +get_rbf_image_info (&rbfinfo, (u16 *)rbf_data); + +if (rbfinfo.section == periph_section) { +/* Initialize the FPGA Manager */ + status = fpgamgr_program_init((u32 *)rbf_data,
rbf_size);drivers/fpga/socfpga_arria10.c +5
-1+if (status) +return status; + } -/* Write the RBF data to FPGA Manager */ + if (rbfinfo.section == core_section && + !(is_fpgamgr_early_user_mode() &&!is_fpgamgr_user_mode())) {
+ debug("FPGA : Must be in early release mode to
program ");drivers/fpga/socfpga_arria10.c +12
-1+debug ("core bitstream.\n" ); +return -EPERM ; + } + +/* Write the bitstream to FPGA Manager */ fpgamgr_program_write (rbf_data, rbf_size); -return fpgamgr_program_finish (); + status =fpgamgr_program_finish (); +if (status) { +config_pins (gd->fdt_blob,"fpga" ); +puts ("FPGA: Enter user mode.\n" ); + } + +return status; }include/image.h +4
-0@@ -1046,6 +1046,10 @@ int fit_check_format(const void *fit);int fit_conf_find_compat (const void *fit,const void *fdt);int fit_conf_get_node (const void *fit,const char *conf_uname); +int fit_conf_get_prop_node_count (const void *fit,int noffset, +const char *prop_name); +int fit_conf_get_prop_node_index (const void *fit,int noffset, +const char *prop_name,int index);/** * fit_conf_get_prop_node() - Get node refered to by a configuration
Chee
PATCH v12 5/9 ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Quoted 39 lines · Simon Goldschmidt
Quoted 37 lines · Tien Fong
Quoted 34 lines · Simon Goldschmidt
Quoted 26 lines · tien.fong.chee at intel.com
From: Tien Fong Chee <[email protected]>
Add FPGA driver to support program FPGA with FPGA bitstream loading
from
filesystem. The driver are designed based on generic firmware loader
framework. The driver can handle FPGA program operation from loading FPGA
bitstream in flash to memory and then to program FPGA.Signed-off-by Tien Fong Chee <[email protected]>---
changes for v12
- No changes.changes for v11
- No changes.changes for v10
(quoted diff) +0
-2-Cleaned up the codes. -Return -EPERM when programing core on non early IO releaseQuoted 2 lines
mode. >
-Using live function to get rid of gd->You got rid of gd-> in v10? How come I see numerous references to it
below?
Quoted 5 lines
Quoted 2 lines
get rid of using
gd->fdt_blobfor finding thenode_offset. Details in https://patchwork.ozlabs.org/patch/1044415/Ah, ok. But still, here you're introducing yet more references to gd-
Quoted 1 line
fdt_blob.That wouldn't work with a live tree, either, or would it?
Yeah, few direct call to config_pin function are still using gd- fdt_blob as argument. But, i'm not sure i should fix this function in this series patch set, or separately patch after this series patch set?
What do you think?
Thanks,
TF
Quoted 814 lines
Quoted 814 lines
-/*
- * FPGA Manager to program the FPGA. This is the interface used by FPGA driver.
- * Return 0 for sucess, non-zero for error.
- */(quoted diff) +5
-0+ofnode get_fpga_mgr_ofnode(void) +{ + int node_offset; + + fdtdec_find_aliases_for_id(gd->fdt_blob, "fpga_mgr",nit: using of live functions would be better to get rid of gd->.
+ COMPAT_ALTERA_SOCFPGA_FPGA0, + &node_offset, 1);
Thanks.
Quoted 794 lines
Quoted 794 lines
-Removed @0 for fs-loader node
changes for v9
- Support data offset
- Added default DDR load address
- Squashed theimage.h
- Changed to phandle
- Ensure the DDR is fully up running by checking thegd->ramchanges for v8
- Added codes to discern bitstream type based on fpga node name.changes for v7
- Restructure the FPGA driver to support both peripheral bitstream
and core
bitstream bundled into FIT image.
- Support loadable property for core bitstream. User can set loadable
in DDR for better performance. This loading would be done in one
large
chunk instead of chunk by chunk loading with small memory buffer.
---
arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts | 17 + .../include/mach/fpga_manager_arria10.h | 39 +- drivers/fpga/socfpga_arria10.c | 497
++++++++++++++++++++-
include/image.h | 4 +4 files changed, 542 insertions(+), 15 deletions(-)arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts +17
-0@@ -18,6 +18,23 @@ /dts-v1/; #include "socfpga_arria10_socdk.dtsi" +/ { + chosen { + firmware-loader = <&fs_loader0>; + }; + + fs_loader0: fs-loader { + u-boot,dm-pre-reloc; + compatible = "u-boot,fs-loader"; + phandlepart = <&mmc 1>; + }; +}; + +&fpga_mgr { + u-boot,dm-pre-reloc; + altr,bitstream = "fit_spl_fpga.itb"; +}; + &mmc { u-boot,dm-pre-reloc; status = "okay";(quoted diff) +0
-0
socfpga/include/mach/fpga_manager_arria10.hb/arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h
index09d13f6fd3..c5f67714aa100644arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +5
-1@@ -1,9 +1,13 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * Copyright (C) 2017 Intel Corporation <www.intel.com> +* Copyright (C) 2017-2019 Intel Corporation <www.intel.com> * All rights reserved. */ +#include <asm/cache.h> +#include <altera.h> +#include <image.h> + #ifndef _FPGA_MANAGER_ARRIA10_H_ #define _FPGA_MANAGER_ARRIA10_H_@@ -51,6 +55,10 @@ #define ALT_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SET_MSK BIT(24) #define ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_LSB16
arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +4
-0+#define FPGA_SOCFPGA_A10_RBF_UNENCRYPTED 0xa65c +#define FPGA_SOCFPGA_A10_RBF_ENCRYPTED 0xa65d +#define FPGA_SOCFPGA_A10_RBF_PERIPH 0x0001 +#define FPGA_SOCFPGA_A10_RBF_CORE 0x8001#ifndef
__ASSEMBLY__struct
socfpga_fpga_manager{arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +28
-1@@ -88,12 +96,39 @@ struct socfpga_fpga_manager { u32 imgcfg_fifo_status; }; +enum rbf_type { + unknown, + periph_section, + core_section +}; + +enum rbf_security { + invalid, + unencrypted, + encrypted +}; + +struct rbf_info { + enum rbf_type section; + enum rbf_security security; +}; + +struct fpga_loadfs_info { + fpga_fs_info *fpga_fsinfo; + u32 remaining; + u32 offset; + struct rbf_info rbfinfo; +}; + /* Functions */ int fpgamgr_program_init(u32 * rbf_data, size_t rbf_size); int fpgamgr_program_finish(void); int is_fpgamgr_user_mode(void); int fpgamgr_wait_early_user_mode(void); - +const char *get_fpga_filename (void ); +int socfpga_loadfs (fpga_fs_info *fpga_fsinfo,const void *buf,size_t bsize, + u32 offset); +void fpgamgr_program (const void *buf,size_t bsize,u32 offset); #endif /* __ASSEMBLY__ */#endif /* _FPGA_MANAGER_ARRIA10_H_ */
drivers/fpga/socfpga_arria10.c +7
-2@@ -1,8 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2017 Intel Corporation <www.intel.com> + * Copyright (C) 2017-2019 Intel Corporation <www.intel.com> */ - #include <asm/io.h> #include <asm/arch/fpga_manager.h> #include <asm/arch/reset_manager.h>@@ -10,8 +9,11 @@ #include <asm/arch/sdram.h> #include <asm/arch/misc.h> #include <altera.h> +#include <asm/arch/pinmux.h> #include <common.h> +#include <dm/ofnode.h> #include <errno.h> +#include <fs_loader.h> #include <wait_bit.h> #include <watchdog.h>@@ -21,6 +23,9 @@ #define COMPRESSION_OFFSET 229 #define FPGA_TIMEOUT_MSEC 1000 /* timeout in ms */ #define FPGA_TIMEOUT_CNT 0x1000000 +#define DEFAULT_DDR_LOAD_ADDRESS 0x400 + +DECLARE_GLOBAL_DATA_PTR ;static const struct
socfpga_fpga_manager*fpga_manager_base= (void *)SOCFPGA_FPGAMGRREGS_ADDRESS;drivers/fpga/socfpga_arria10.c +0
-2@@ -448,13 +453,461 @@ int fpgamgr_program_finish(void) return 0; } -/* -* FPGA Manager to program the FPGA. This is the interface used by
FPGA driver.
- * Return 0 for sucess, non-zero for error.
- */drivers/fpga/socfpga_arria10.c +3
-0+ofnode get_fpga_mgr_ofnode (ofnode from) +{ + return ofnode_by_compatible(from, "altr,socfpga-a10-fpga-mgr");
drivers/fpga/socfpga_arria10.c +16
-0+} + +const char *get_fpga_filename (void ) +{ + const char *fpga_filename = NULL; + + ofnode fpgamgr_node = get_fpga_mgr_ofnode(ofnode_null()); + + if (ofnode_valid(fpgamgr_node)) + fpga_filename = ofnode_read_string(fpgamgr_node, + "altr,bitstream"); + + return fpga_filename; +} + +static void get_rbf_image_info(struct rbf_info *rbf, u16*buffer)
drivers/fpga/socfpga_arria10.c +12
-0+{ + /* + * Magic ID starting at: + * -> 1st dword[15:0] in periph.rbf + * -> 2nd dword[15:0] in core.rbf + * Note: dword == 32 bits + */ + u32 word_reading_max = 2; + u32 i; + + for (i = 0; i < word_reading_max; i++) { + if (*(buffer + i) ==
FPGA_SOCFPGA_A10_RBF_UNENCRYPTED) {
+ rbf->security = unencrypted;
+ } else if (*(buffer + i) ==FPGA_SOCFPGA_A10_RBF_ENCRYPTED) {
+ rbf->security = encrypted;
+ } else if (*(buffer + i + 1) ==
+ FPGA_SOCFPGA_A10_RBF_UNENCRYPTED) {
+ rbf->security = unencrypted;
+ } else if (*(buffer + i + 1) ==
+ FPGA_SOCFPGA_A10_RBF_ENCRYPTED) { + rbf->security = encrypted;
+ } else {
+ rbf->security = invalid;
+ continue;
+ }
+
+ /* PERIPH RBF(buffer + i + 1), CORE RBF(buffer + i
+ 2) */
+ if (*(buffer + i + 1) ==FPGA_SOCFPGA_A10_RBF_PERIPH) {
+ rbf->section =periph_section;
+ break;
+ } else if (*(buffer + i + 1) ==FPGA_SOCFPGA_A10_RBF_CORE) {
+ rbf->section =core_section;
+ break;
+ } else if (*(buffer + i + 2) ==FPGA_SOCFPGA_A10_RBF_PERIPH) {
+ rbf->section =periph_section;
+ break;
+ } else if (*(buffer + i + 2) ==FPGA_SOCFPGA_A10_RBF_CORE) {
+ rbf->section =core_section;
+ break;
+ }drivers/fpga/socfpga_arria10.c +11
-0+ + rbf->section = unknown; + break; + + WATCHDOG_RESET(); + } +} + +#ifdef CONFIG_FS_LOADER +static int first_loading_rbf_to_buffer (struct udevice *dev, + struct fpga_loadfs_info
*fpga_loadfs,
+ u32 *buffer,size_t*buffer_bsize) +{
+ u32*buffer_p= (u32 *)*buffer;
+ u32 *loadable =buffer_p;
+ size_tbuffer_size=*buffer_bsize;
+ size_tfit_size;
+ int ret, i, count,confs_noffset,images_noffset,rbf_offset,rbf_size;
+ const char*fpga_node_name= NULL;
+ const char *uname = NULL;
+
+ /* Load image header into buffer */
+ ret = request_firmware_into_buf(dev,
+ fpga_loadfs->fpga_fsinfo-Quoted 2 lines
filename,
+ buffer_p,
sizeof(struct image_header),
+ 0);
+ if (ret < 0) {
+ debug("FPGA: Failed to read image header from flash.\n");
+ return-ENOENT;
+ }
+
+ if (image_get_magic((struct image_header *)buffer_p)!=FDT_MAGIC) {
+ debug("FPGA: No FDT magic was found.\n"); + return-EBADF;
+ }drivers/fpga/socfpga_arria10.c +5
-0+ + fit_size = fdt_totalsize(buffer_p); + + if (fit_size > buffer_size) { + debug("FPGA: FIT image is larger than availablebuffer.\n");
+ debug("Please use FIT external data or increasing buffer.\n");
+ return-ENOMEM;
+ }
+
+ /* Load entire FIT into buffer */
+ ret = request_firmware_into_buf(dev,
+ fpga_loadfs->fpga_fsinfo-Quoted 2 lines
filename,
+ buffer_p,
fit_size, 0); + if (ret < 0)
+ return ret;drivers/fpga/socfpga_arria10.c +9
-0+ + ret = fit_check_format(buffer_p); + if (!ret) { + debug("FPGA: No valid FIT image was found.\n"); + return -EBADF; + } + + confs_noffset = fdt_path_offset(buffer_p, FIT_CONFS_PATH); + images_noffset = fdt_path_offset(buffer_p,
FIT_IMAGES_PATH);
+ if (confs_noffset< 0 ||images_noffset< 0) {
+ debug("FPGA: No Configurations or images nodes were found.\n");
+ return-ENOENT;
+ }
+
+ /* Get default configuration unit name from default property */
+ confs_noffset =fit_conf_get_node(buffer_p, NULL); + if (confs_noffset< 0) {
+ debug("FPGA: No default configuration was found in config.\n");
+ return-ENOENT;
+ }
+
+ count = fit_conf_get_prop_node_count(buffer_p,confs_noffset,
+ FIT_FPGA_PROP); + if (count < 0) {
+ debug("FPGA: Invalid configuration format for FPGA node.\n");
+ return count;
+ }
+ debug("FPGA: FPGA node count: %d\n", count);
+
+ for (i = 0; i < count; i++) {
+ images_noffset = fit_conf_get_prop_node_index(buffer_p,
+ confs_noffset,
+ FIT_FPGA_PROP, i);
+ uname =fit_get_name(buffer_p, images_noffset, NULL);
+ if (uname) {
+ debug("FPGA: %s\n", uname);
+
+ if (strstr(uname, "fpga-periph")&& + (!is_fpgamgr_early_user_mode() || + is_fpgamgr_user_mode())) { + fpga_node_name = uname; + printf("FPGA: Start to program "); + printf("peripheral/full bitstream ...\n");
+ break;
+ } else if (strstr(uname, "fpga-core")&& + (is_fpgamgr_early_user_mode()&&
+ !is_fpgamgr_user_mode())) {
+ fpga_node_name = uname; + printf("FPGA: Start to program core ");
+ printf("bitstream ...\n"); + break;
+ }
+ }
+ WATCHDOG_RESET();
+ }
+
+ if (!fpga_node_name) {
+ debug("FPGA: No suitable bitstream was found,
count: %d.\n", i);
+ return 1;
+ }
+
+ images_noffset =fit_image_get_node(buffer_p, fpga_node_name);
+ if (images_noffset< 0) {
+ debug("FPGA: No node '%s' was found in FIT.\n", + fpga_node_name);
+ return-ENOENT;
+ }
+
+ if (!fit_image_get_data_position(buffer_p,images_noffset, + &rbf_offset)) { + debug("FPGA: Data position was found.\n"); + } else if (!fit_image_get_data_offset(buffer_p,images_noffset,
+ &rbf_offset)) {
+ /*
+ * For FIT with external data, figure out where + * the external images start. This is the base + * for the data-offset properties in each image. + */
+ rbf_offset += ((fdt_totalsize(buffer_p)+ 3) & ~3);
+ debug("FPGA: Data offset was found.\n"); + } else {
+ debug("FPGA: No data position/offset was found.\n");
+ return-ENOENT;
+ }
+
+ ret =fit_image_get_data_size(buffer_p, images_noffset, &rbf_size);
+ if (ret < 0) {
+ debug("FPGA: No data size was found (err=%d).\n", ret);
+ return-ENOENT;
+ }
+
+ if (gd->ram_size<rbf_size) {
+ debug("FPGA: Using default OCRAM buffer and size.\n");
+ } else {
+ ret = fit_image_get_load(buffer_p,images_noffset, + (ulong *)loadable); + if (ret < 0) {
+ buffer_p = (u32 *)DEFAULT_DDR_LOAD_ADDRESS;
+ debug("FPGA: No loadable was found.\n"); + debug("FPGA: Using default DDR load
address: 0x%x .\n",
+ DEFAULT_DDR_LOAD_ADDRESS); + } else {
+ buffer_p = (u32 *)*loadable;
+ debug("FPGA: Found loadable address = 0x%x.\n",
+ *loadable);
+ }drivers/fpga/socfpga_arria10.c +5
-0+ + buffer_size = rbf_size; + } + + debug("FPGA: External data: offset = 0x%x, size =0x%x.\n",
+ rbf_offset,rbf_size);drivers/fpga/socfpga_arria10.c +5
-0+ + fpga_loadfs->remaining = rbf_size; + + /* +* Determine buffer size vs bitstream size, and calculating number of
+ * chunk by chunk transfer is required due to smaller buffer size
+ * compare to bitstream
+ */
+ if (rbf_size<=buffer_size) {
+ /* Loading whole bitstream into buffer */ + buffer_size =rbf_size;
+ fpga_loadfs->remaining = 0;
+ } else {
+ fpga_loadfs->remaining -=buffer_size; + }
+
+ fpga_loadfs->offset =rbf_offset;
+ /* Loading bitstream into buffer */
+ ret = request_firmware_into_buf(dev,
+ fpga_loadfs->fpga_fsinfo-Quoted 2 lines
filename,
+ buffer_p,
buffer_size, + fpga_loadfs->offset); + if (ret < 0) {
+ debug("FPGA: Failed to read bitstream from flash.\n");
+ return-ENOENT;
+ }
+
+ /* Getting info about bitstream types */
+ get_rbf_image_info(&fpga_loadfs->rbfinfo, (u16 *)buffer_p);drivers/fpga/socfpga_arria10.c +8
-0+ + /* Update next reading bitstream offset */ + fpga_loadfs->offset += buffer_size; + + /* Update the final addr for bitstream */ + *buffer = (u32)buffer_p; + + /* Update the size of bitstream to be programmed into FPGA*/
+ *buffer_bsize =buffer_size;drivers/fpga/socfpga_arria10.c +5
-0+ + return 0; +} + +static int subsequent_loading_rbf_to_buffer(struct udevice*dev,
+ structfpga_loadfs_info*fpga_loadfs,
+ u32 *buffer,size_t*buffer_bsize)drivers/fpga/socfpga_arria10.c +14
-0+{ + int ret = 0; + u32 *buffer_p = (u32 *)*buffer; + + /* Read the bitstream chunk by chunk. */ + if (fpga_loadfs->remaining > *buffer_bsize) { + fpga_loadfs->remaining -= *buffer_bsize; + } else { + *buffer_bsize = fpga_loadfs->remaining; + fpga_loadfs->remaining = 0; + } + + ret = request_firmware_into_buf(dev, + fpga_loadfs->fpga_fsinfo-Quoted 2 lines
filename,
+ buffer_p,
*buffer_bsize, + fpga_loadfs->offset); + if (ret < 0) {
+ debug("FPGA: Failed to read bitstream from flash.\n");
+ return-ENOENT;
+ }drivers/fpga/socfpga_arria10.c +8
-0+ + /* Update next reading bitstream offset */ + fpga_loadfs->offset += *buffer_bsize; + + return 0; +} + +int socfpga_loadfs(fpga_fs_info *fpga_fsinfo, const void *buf,
size_tbsize,
+ u32 offset)drivers/fpga/socfpga_arria10.c +16
-0+{ + struct fpga_loadfs_info fpga_loadfs; + struct udevice *dev; + int status, ret, size; + u32 buffer = (uintptr_t)buf; + size_t buffer_sizebytes = bsize; + size_t buffer_sizebytes_ori = bsize; + size_t total_sizeof_image = 0; + ofnode node; + const fdt32_t *phandle_p; + u32 phandle; + + node = get_fpga_mgr_ofnode(ofnode_null()); + + if (ofnode_valid(node)) { + phandle_p = ofnode_get_property(node, "firmware-loader", &size);
+ if (!phandle_p) {
+ node =ofnode_path("/chosen");
+ if (!ofnode_valid(node)) {
+ debug("FPGA: /chosen node was not found.\n");
+ return-ENOENT;
+ }
+
+ phandle_p = ofnode_get_property(node, "firmware-loader",
+ &size); + if (!phandle_p) {
+ debug("FPGA: firmware-loader property was not");
+ debug(" found.\n");
+ return-ENOENT;
+ }
+ }
+ } else {
+ debug("FPGA: FPGA manager node was not found.\n"); + return-ENOENT;
+ }
+
+ phandle =fdt32_to_cpu(*phandle_p);
+ ret = uclass_get_device_by_phandle_id(UCLASS_FS_FIRMWARE_LOADER, + phandle, &dev); + if (ret)
+ return ret;drivers/fpga/socfpga_arria10.c +10
-0+ + memset(&fpga_loadfs, 0, sizeof(fpga_loadfs)); + + fpga_loadfs.fpga_fsinfo = fpga_fsinfo; + fpga_loadfs.offset = offset; + + printf("FPGA: Checking FPGA configuration setting ...\n"); + + /* +* Note: Both buffer and buffer_sizebytes values can be altered by
+ * function below.
+ */
+ ret = first_loading_rbf_to_buffer(dev,&fpga_loadfs, &buffer,
+ &buffer_sizebytes); + if (ret == 1) {
+ printf("FPGA: Skipping configuration ...\n"); + return 0;
+ } else if (ret) {
+ return ret;
+ }
+
+ if (fpga_loadfs.rbfinfo.section ==core_section&& + !(is_fpgamgr_early_user_mode() && !is_fpgamgr_user_mode())) {
+ debug("FPGA : Must be in Early Release mode to program ");
+ debug("core bitstream.\n");
+ return-EPERM;
+ }
+
+ /* Disable all signals from HPS peripheral controller to FPGA */
+ writel(0,&system_manager_base->fpgaintf_en_global); +
+ /* Disable all axi bridges (hps2fpga, lwhps2fpga & fpga2hps) */
+ socfpga_bridges_reset();
+
+ if (fpga_loadfs.rbfinfo.section ==periph_section) { + /* Initialize the FPGA Manager */
+ status =fpgamgr_program_init((u32 *)buffer, buffer_sizebytes);
+ if (status) {
+ debug("FPGA: Init with peripheral bitstream failed.\n");
+ return-EPERM;
+ }
+ }drivers/fpga/socfpga_arria10.c +9
-0+ + /* Transfer bitstream to FPGA Manager */ + fpgamgr_program_write((void *)buffer, buffer_sizebytes); + + total_sizeof_image += buffer_sizebytes; + + while (fpga_loadfs.remaining) { + ret = subsequent_loading_rbf_to_buffer(dev, + &fpga_loadfs,
+ &buffer, + &buffer_sizebytes_ori);drivers/fpga/socfpga_arria10.c +15
-0+ + if (ret) + return ret; + + /* Transfer data to FPGA Manager */ + fpgamgr_program_write((void *)buffer, + buffer_sizebytes_ori); + + total_sizeof_image += buffer_sizebytes_ori; + + WATCHDOG_RESET(); + } + + if (fpga_loadfs.rbfinfo.section == periph_section) { + if (fpgamgr_wait_early_user_mode() != -ETIMEDOUT){
+ config_pins(gd->fdt_blob, "shared"); + puts("FPGA: Early Release Succeeded.\n"); + } else {
+ debug("FPGA: Failed to see Early Release.\n");
+ return-EIO;
+ }drivers/fpga/socfpga_arria10.c +21
-0+ + /* For monolithic bitstream */ + if (is_fpgamgr_user_mode()) { + /* Ensure the FPGA entering config done */ + status = fpgamgr_program_finish(); + if (status) + return status; + + config_pins(gd->fdt_blob, "fpga"); + puts("FPGA: Enter user mode.\n"); + } + } else if (fpga_loadfs.rbfinfo.section == core_section) { + /* Ensure the FPGA entering config done */ + status = fpgamgr_program_finish(); + if (status) + return status; + + config_pins(gd->fdt_blob, "fpga"); + puts("FPGA: Enter user mode.\n"); + } else { + debug("FPGA: Config Error: Unsupported bitstreamtype.\n");
+ return-ENOEXEC;
+ }drivers/fpga/socfpga_arria10.c +5
-0+ + return (int)total_sizeof_image; +} + +void fpgamgr_program(const void *buf, size_t bsize, u32offset)
drivers/fpga/socfpga_arria10.c +11
-0+{ + fpga_fs_info fpga_fsinfo; + + fpga_fsinfo.filename = get_fpga_filename(); + + if (fpga_fsinfo.filename) + socfpga_loadfs(&fpga_fsinfo, buf, bsize, offset); +} +#endif + +/* This function is used to load the core bitstream from the OCRAM. */
int socfpga_load(Altera_desc *desc, const void*rbf_data,size_trbf_size)
{
- int status;
+ unsigned long status;
+ structrbf_inforbfinfo;
+
+ memset(&rbfinfo, 0, sizeof(rbfinfo));/* Disable all signals from hps peripheral controller to fpga */
writel(0,&system_manager_base->fpgaintf_en_global);drivers/fpga/socfpga_arria10.c +0
-0@@ -462,13 +915,31 @@ int socfpga_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size) /* Disable all axi bridge (hps2fpga, lwhps2fpga &fpga2hps) */
socfpga_bridges_reset();- /* Initialize the FPGA Manager */
- status =fpgamgr_program_init((u32 *)rbf_data, rbf_size); - if (status)
- return status;
+ /* Getting info about bitstream types */
+ get_rbf_image_info(&rbfinfo, (u16 *)rbf_data); +
+ if (rbfinfo.section ==periph_section) {
+ /* Initialize the FPGA Manager */
+ status =fpgamgr_program_init((u32 *)rbf_data, rbf_size);
+ if (status)
+ return status;
+ }- /* Write the RBF data to FPGA Manager */
+ if (rbfinfo.section ==core_section&&
+ !(is_fpgamgr_early_user_mode() && !is_fpgamgr_user_mode())) {
+ debug("FPGA : Must be in early release mode to program ");
+ debug("core bitstream.\n");
+ return-EPERM;
+ }
+
+ /* Write the bitstream to FPGA Manager */fpgamgr_program_write(rbf_data, rbf_size);- return
fpgamgr_program_finish();
+ status =fpgamgr_program_finish();
+ if (status) {
+ config_pins(gd->fdt_blob, "fpga");
+ puts("FPGA: Enter user mode.\n");
+ }
+
+ return status;
}include/image.h +0
-0@@ -1046,6 +1046,10 @@ int fit_check_format(const void *fit); int fit_conf_find_compat(const void *fit, const void *fdt);int
fit_conf_get_node(const void *fit, const char *conf_uname);include/image.h +4
-0+int fit_conf_get_prop_node_count (const void *fit,int noffset, + const char *prop_name); +int fit_conf_get_prop_node_index (const void *fit,int noffset, + const char *prop_name, int index);/**
*fit_conf_get_prop_node()- Get node refered to by a configuration
PATCH v12 5/9 ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Quoted 44 lines · Tien Fong
Quoted 42 lines · Simon Goldschmidt
Quoted 37 lines · Tien Fong
Quoted 26 lines · Simon Goldschmidt
Quoted 23 lines · tien.fong.chee at intel.com
From: Tien Fong Chee <[email protected]>
Add FPGA driver to support program FPGA with FPGA bitstream loading
from
filesystem. The driver are designed based on generic firmware loader
framework. The driver can handle FPGA program operation from loading FPGA
bitstream in flash to memory and then to program FPGA.Signed-off-by Tien Fong Chee <[email protected]>---
changes for v12
- No changes.changes for v11
- No changes.Quoted 8 lines
Quoted 5 lines
changes for v10
(quoted diff) +0
-2-Cleaned up the codes. -Return -EPERM when programing core on non early IO releasemode. >
-Using live function to get rid of gd->You got rid of gd-> in v10? How come I see numerous references to it
below?Quoted 2 lines
get rid of using
gd->fdt_blobfor finding thenode_offset. Details in https://patchwork.ozlabs.org/patch/1044415/Ah, ok. But still, here you're introducing yet more references to gd-
Quoted 8 lines
Quoted 2 lines
Quoted 1 line
fdt_blob.That wouldn't work with a live tree, either, or would it?
Yeah, few direct call to
config_pinfunction are still using gd-fdt_blobas argument. But, i'm not sure i should fix this function in this series patch set, or separately patch after this series patch set?What do you think?
While I do have a strong opinion that this should be cleaned up, it would be kind of off-topic in this patch. I was just confused by the version log.
Regards,
Simon
Quoted 817 lines
Thanks,
TFQuoted 814 lines
Quoted 814 lines
-/*
- * FPGA Manager to program the FPGA. This is the interface used by FPGA driver.
- * Return 0 for sucess, non-zero for error.
- */(quoted diff) +5
-0+ofnode get_fpga_mgr_ofnode(void) +{ + int node_offset; + + fdtdec_find_aliases_for_id(gd->fdt_blob, "fpga_mgr",nit: using of live functions would be better to get rid of gd->.
(quoted diff) +2
-0+ COMPAT_ALTERA_SOCFPGA_FPGA0, + &node_offset, 1);Thanks.
Quoted 794 lines
Quoted 794 lines
-Removed @0 for fs-loader node
changes for v9
- Support data offset
- Added default DDR load address
- Squashed theimage.h
- Changed to phandle
- Ensure the DDR is fully up running by checking thegd->ramchanges for v8
- Added codes to discern bitstream type based on fpga node name.changes for v7
- Restructure the FPGA driver to support both peripheral bitstream
and core
bitstream bundled into FIT image.
- Support loadable property for core bitstream. User can set loadable
in DDR for better performance. This loading would be done in
one
large
chunk instead of chunk by chunk loading with small memory
buffer.--- arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts | 17 + .../include/mach/fpga_manager_arria10.h | 39 +- drivers/fpga/socfpga_arria10.c | 497 ++++++++++++++++++++- include/image.h | 4 + 4 files changed, 542 insertions(+), 15 deletions(-)arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts +17
-0@@ -18,6 +18,23 @@ /dts-v1/; #include "socfpga_arria10_socdk.dtsi" +/ { + chosen { + firmware-loader = <&fs_loader0>; + }; + + fs_loader0: fs-loader { + u-boot,dm-pre-reloc; + compatible = "u-boot,fs-loader"; + phandlepart = <&mmc 1>; + }; +}; + +&fpga_mgr { + u-boot,dm-pre-reloc; + altr,bitstream = "fit_spl_fpga.itb"; +}; + &mmc { u-boot,dm-pre-reloc; status = "okay";(quoted diff) +0
-0
socfpga/include/mach/fpga_manager_arria10.hb/arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h
index09d13f6fd3..c5f67714aa100644arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +5
-1@@ -1,9 +1,13 @@/* SPDX-License-Identifier: GPL-2.0 */ /* -* Copyright (C) 2017 Intel Corporation <www.intel.com> +* Copyright (C) 2017-2019 Intel Corporation <www.intel.com> * All rights reserved. */ +#include <asm/cache.h> +#include <altera.h> +#include <image.h> +#ifndef _FPGA_MANAGER_ARRIA10_H_#define _FPGA_MANAGER_ARRIA10_H_@@ -51,6 +55,10 @@#define ALT_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SET_MSK BIT(24)#define ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_LSB 16
arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +32
-1+#define FPGA_SOCFPGA_A10_RBF_UNENCRYPTED 0xa65c +#define FPGA_SOCFPGA_A10_RBF_ENCRYPTED 0xa65d +#define FPGA_SOCFPGA_A10_RBF_PERIPH 0x0001 +#define FPGA_SOCFPGA_A10_RBF_CORE 0x8001#ifndef __ASSEMBLY__ struct socfpga_fpga_manager {@@ -88,12 +96,39 @@ struct socfpga_fpga_manager {u32 imgcfg_fifo_status; }; +enum rbf_type { + unknown, + periph_section, + core_section +}; + +enum rbf_security { + invalid, + unencrypted, + encrypted +}; + +struct rbf_info { +enum rbf_type section; +enum rbf_security security; +}; + +struct fpga_loadfs_info { +fpga_fs_info *fpga_fsinfo; +u32 remaining; +u32 offset; +struct rbf_info rbfinfo; +}; +/* Functions */ int fpgamgr_program_init (u32 * rbf_data,size_t rbf_size);int fpgamgr_program_finish (void );int is_fpgamgr_user_mode (void );int fpgamgr_wait_early_user_mode (void ); - +const char *get_fpga_filename (void ); +int socfpga_loadfs (fpga_fs_info *fpga_fsinfo,const void *buf,size_t bsize, +u32 offset); +void fpgamgr_program (const void *buf,size_t bsize,u32 offset);#endif /* __ASSEMBLY__ */ #endif /* _FPGA_MANAGER_ARRIA10_H_ */drivers/fpga/socfpga_arria10.c +7
-4@@ -1,8 +1,7 @@// SPDX-License-Identifier: GPL-2.0 /* -* Copyright (C) 2017 Intel Corporation <www.intel.com> +* Copyright (C) 2017-2019 Intel Corporation <www.intel.com> */ -#include <asm/io.h> #include <asm/arch/fpga_manager.h> #include <asm/arch/reset_manager.h> @@ -10,8 +9,11 @@#include <asm/arch/sdram.h> #include <asm/arch/misc.h> #include <altera.h> +#include <asm/arch/pinmux.h> #include <common.h> +#include <dm/ofnode.h> #include <errno.h> +#include <fs_loader.h> #include <wait_bit.h> #include <watchdog.h> @@ -21,6 +23,9 @@#define COMPRESSION_OFFSET 229#define FPGA_TIMEOUT_MSEC 1000/* timeout in ms */ #define FPGA_TIMEOUT_CNT 0x1000000 +#define DEFAULT_DDR_LOAD_ADDRESS 0x400 + +DECLARE_GLOBAL_DATA_PTR ;static const struct socfpga_fpga_manager *fpga_manager_base = (void *)SOCFPGA_FPGAMGRREGS_ADDRESS ;@@ -448,13 +453,461 @@ int fpgamgr_program_finish(void)return 0 ; } -/* -* FPGA Manager to program the FPGA. This is the interface used by
FPGA driver.
- * Return 0 for sucess, non-zero for error.
- */drivers/fpga/socfpga_arria10.c +3
-0+ofnode get_fpga_mgr_ofnode (ofnode from) +{ + return ofnode_by_compatible(from, "altr,socfpga-a10-fpga-mgr");
drivers/fpga/socfpga_arria10.c +16
-0+} + +const char *get_fpga_filename (void ) +{ +const char *fpga_filename =NULL ; + +ofnode fpgamgr_node =get_fpga_mgr_ofnode (ofnode_null ()); + +if (ofnode_valid (fpgamgr_node)) + fpga_filename =ofnode_read_string (fpgamgr_node, +"altr,bitstream" ); + +return fpga_filename; +} + +static void get_rbf_image_info(struct rbf_info *rbf, u16*buffer)
drivers/fpga/socfpga_arria10.c +12
-0+{ +/* +* Magic ID starting at: +* -> 1st dword[15:0] in periph.rbf +* -> 2nd dword[15:0] in core.rbf +* Note: dword == 32 bits +*/ +u32 word_reading_max =2 ; +u32 i; + +for (i =0 ; i < word_reading_max; i++) { + if (*(buffer + i) ==
FPGA_SOCFPGA_A10_RBF_UNENCRYPTED) {drivers/fpga/socfpga_arria10.c +2
-0+ rbf->security = unencrypted; + } else if (*(buffer + i) ==
FPGA_SOCFPGA_A10_RBF_ENCRYPTED) {drivers/fpga/socfpga_arria10.c +3
-0+ rbf->security = encrypted; + }else if (*(buffer + i +1 ) == +FPGA_SOCFPGA_A10_RBF_UNENCRYPTED ){
drivers/fpga/socfpga_arria10.c +12
-0+ rbf->security = unencrypted; + }else if (*(buffer + i +1 ) == +FPGA_SOCFPGA_A10_RBF_ENCRYPTED ) { + rbf->security = encrypted; + }else { + rbf->security = invalid; +continue ; + } + +/* PERIPH RBF(buffer + i + 1), CORE RBF(buffer + i +2) */ + if (*(buffer + i + 1) ==
FPGA_SOCFPGA_A10_RBF_PERIPH) {drivers/fpga/socfpga_arria10.c +3
-0+ rbf->section = periph_section; +break ; + } else if (*(buffer + i + 1) ==
FPGA_SOCFPGA_A10_RBF_CORE) {drivers/fpga/socfpga_arria10.c +3
-0+ rbf->section = core_section; +break ; + } else if (*(buffer + i + 2) ==
FPGA_SOCFPGA_A10_RBF_PERIPH) {drivers/fpga/socfpga_arria10.c +3
-0+ rbf->section = periph_section; +break ; + } else if (*(buffer + i + 2) ==
FPGA_SOCFPGA_A10_RBF_CORE) {drivers/fpga/socfpga_arria10.c +14
-0+ rbf->section = core_section; +break ; + } + + rbf->section = unknown; +break ; + +WATCHDOG_RESET (); + } +} + +#ifdef CONFIG_FS_LOADER +static int first_loading_rbf_to_buffer (struct udevice *dev, + struct fpga_loadfs_info
*fpga_loadfs,drivers/fpga/socfpga_arria10.c +7
-0+ u32 *buffer, size_t *buffer_bsize) +{ +u32 *buffer_p = (u32 *)*buffer; +u32 *loadable = buffer_p; +size_t buffer_size = *buffer_bsize; +size_t fit_size; + int ret, i, count, confs_noffset, images_noffset,
rbf_offset,rbf_size;drivers/fpga/socfpga_arria10.c +6
-0+const char *fpga_node_name =NULL ; +const char *uname =NULL ; + +/* Load image header into buffer */ + ret = request_firmware_into_buf(dev, + fpga_loadfs->fpga_fsinfo-Quoted 2 lines
filename,
+
buffer_p, sizeof(structimage_header),drivers/fpga/socfpga_arria10.c +3
-0+ 0); +if (ret <0 ) { + debug("FPGA: Failed to read image header fromflash.\n");
drivers/fpga/socfpga_arria10.c +4
-0+return -ENOENT ; + } + + if (image_get_magic((struct image_header *)buffer_p) !=
FDT_MAGIC) {drivers/fpga/socfpga_arria10.c +8
-0+debug ("FPGA: No FDT magic was found.\n" ); +return -EBADF ; + } + + fit_size =fdt_totalsize (buffer_p); + +if (fit_size > buffer_size) { + debug("FPGA: FIT image is larger than availablebuffer.\n");
+ debug("Please use FIT external data or increasing
buffer.\n");drivers/fpga/socfpga_arria10.c +6
-0+return -ENOMEM ; + } + +/* Load entire FIT into buffer */ + ret = request_firmware_into_buf(dev, + fpga_loadfs->fpga_fsinfo-Quoted 2 lines
filename,
drivers/fpga/socfpga_arria10.c +12
-0+ buffer_p, fit_size, 0); +if (ret <0 ) +return ret; + + ret =fit_check_format (buffer_p); +if (!ret) { +debug ("FPGA: No valid FIT image was found.\n" ); +return -EBADF ; + } + + confs_noffset =fdt_path_offset (buffer_p,FIT_CONFS_PATH ); + images_noffset = fdt_path_offset(buffer_p,
FIT_IMAGES_PATH);drivers/fpga/socfpga_arria10.c +2
-0+if (confs_noffset <0 || images_noffset <0 ) { + debug("FPGA: No Configurations or images nodeswere found.\n");
drivers/fpga/socfpga_arria10.c +4
-0+return -ENOENT ; + } + +/* Get default configuration unit name from default property */
drivers/fpga/socfpga_arria10.c +3
-0+ confs_noffset =fit_conf_get_node (buffer_p,NULL ); +if (confs_noffset <0 ) { + debug("FPGA: No default configuration was found inconfig.\n");
drivers/fpga/socfpga_arria10.c +4
-0+return -ENOENT ; + } + + count = fit_conf_get_prop_node_count(buffer_p,
confs_noffset,drivers/fpga/socfpga_arria10.c +3
-0+ FIT_FPGA_PROP); +if (count <0 ) { + debug("FPGA: Invalid configuration format for FPGAnode.\n");
drivers/fpga/socfpga_arria10.c +6
-0+return count; + } +debug ("FPGA: FPGA node count: %d\n" , count); + +for (i =0 ; i < count; i++) { + images_noffset =fit_conf_get_prop_node_index(buffer_p,
+ confs_noffset,
+FIT_FPGA_PROP, i);
+ uname = fit_get_name(buffer_p,images_noffset,
NULL);drivers/fpga/socfpga_arria10.c +9
-0+if (uname) { +debug ("FPGA: %s\n" , uname); + +if (strstr (uname,"fpga-periph" ) && + (!is_fpgamgr_early_user_mode () || +is_fpgamgr_user_mode ())) { + fpga_node_name = uname; +printf ("FPGA: Start to program " ); + printf("peripheral/full bitstream...\n");
drivers/fpga/socfpga_arria10.c +3
-0+break ; + } else if (strstr(uname, "fpga-core") && + (is_fpgamgr_early_user_mod
e()&&
+ !is_fpgamgr_user_mode()))
{drivers/fpga/socfpga_arria10.c +2
-0+ fpga_node_name = uname; + printf("FPGA: Start to programcore ");
drivers/fpga/socfpga_arria10.c +9
-0+printf ("bitstream ...\n" ); +break ; + } + } +WATCHDOG_RESET (); + } + +if (!fpga_node_name) { + debug("FPGA: No suitable bitstream was found,count: %d.\n", i);
drivers/fpga/socfpga_arria10.c +4
-0+return 1 ; + } + + images_noffset = fit_image_get_node(buffer_p,
fpga_node_name);drivers/fpga/socfpga_arria10.c +10
-0+if (images_noffset <0 ) { +debug ("FPGA: No node '%s' was found in FIT.\n" , + fpga_node_name); +return -ENOENT ; + } + +if (!fit_image_get_data_position (buffer_p, images_noffset, + &rbf_offset)) { +debug ("FPGA: Data position was found.\n" ); + } else if (!fit_image_get_data_offset(buffer_p,
images_noffset,drivers/fpga/socfpga_arria10.c +7
-0+ &rbf_offset)) { +/* +* For FIT with external data, figure out where +* the external images start. This is the base +* for the data-offset properties in each image. +*/ + rbf_offset += ((fdt_totalsize(buffer_p) + 3) &~3);
drivers/fpga/socfpga_arria10.c +3
-0+debug ("FPGA: Data offset was found.\n" ); + }else { + debug("FPGA: No data position/offset wasfound.\n");
drivers/fpga/socfpga_arria10.c +4
-0+return -ENOENT ; + } + + ret = fit_image_get_data_size(buffer_p, images_noffset,
&rbf_size);drivers/fpga/socfpga_arria10.c +2
-0+if (ret <0 ) { + debug("FPGA: No data size was found (err=%d).\n",ret);
drivers/fpga/socfpga_arria10.c +5
-0+return -ENOENT ; + } + +if (gd->ram_size < rbf_size) { + debug("FPGA: Using default OCRAM buffer andsize.\n");
drivers/fpga/socfpga_arria10.c +5
-0+ }else { + ret =fit_image_get_load (buffer_p, images_noffset, + (ulong *)loadable); +if (ret <0 ) { + buffer_p = (u32*)DEFAULT_DDR_LOAD_ADDRESS;
drivers/fpga/socfpga_arria10.c +2
-0+debug ("FPGA: No loadable was found.\n" ); + debug("FPGA: Using default DDR loadaddress: 0x%x .\n",
drivers/fpga/socfpga_arria10.c +4
-0+ DEFAULT_DDR_LOAD_ADDRESS); + }else { + buffer_p = (u32 *)*loadable; + debug("FPGA: Found loadable address =0x%x.\n",
drivers/fpga/socfpga_arria10.c +7
-0+ *loadable); + } + + buffer_size = rbf_size; + } + + debug("FPGA: External data: offset = 0x%x, size =0x%x.\n",
drivers/fpga/socfpga_arria10.c +6
-0+ rbf_offset, rbf_size); + + fpga_loadfs->remaining = rbf_size; + +/* +* Determine buffer size vs bitstream size, and calculating number of
+ * chunk by chunk transfer is required due to smaller
buffer sizedrivers/fpga/socfpga_arria10.c +14
-0+* compare to bitstream +*/ +if (rbf_size <= buffer_size) { +/* Loading whole bitstream into buffer */ + buffer_size = rbf_size; + fpga_loadfs->remaining =0 ; + }else { + fpga_loadfs->remaining -= buffer_size; + } + + fpga_loadfs->offset = rbf_offset; +/* Loading bitstream into buffer */ + ret = request_firmware_into_buf(dev, + fpga_loadfs->fpga_fsinfo-Quoted 2 lines
filename,
drivers/fpga/socfpga_arria10.c +4
-0+ buffer_p, buffer_size, + fpga_loadfs->offset); +if (ret <0 ) { + debug("FPGA: Failed to read bitstream fromflash.\n");
drivers/fpga/socfpga_arria10.c +5
-0+return -ENOENT ; + } + +/* Getting info about bitstream types */ + get_rbf_image_info(&fpga_loadfs->rbfinfo, (u16*)buffer_p);
drivers/fpga/socfpga_arria10.c +8
-0+ +/* Update next reading bitstream offset */ + fpga_loadfs->offset += buffer_size; + +/* Update the final addr for bitstream */ + *buffer = (u32 )buffer_p; + +/* Update the size of bitstream to be programmed into FPGA */
drivers/fpga/socfpga_arria10.c +6
-0+ *buffer_bsize = buffer_size; + +return 0 ; +} + +static int subsequent_loading_rbf_to_buffer(struct udevice*dev,
+ structfpga_loadfs_info*fpga_loadfs,
+ u32 *buffer,size_t*buffer_bsize)drivers/fpga/socfpga_arria10.c +14
-0+{ +int ret =0 ; +u32 *buffer_p = (u32 *)*buffer; + +/* Read the bitstream chunk by chunk. */ +if (fpga_loadfs->remaining > *buffer_bsize) { + fpga_loadfs->remaining -= *buffer_bsize; + }else { + *buffer_bsize = fpga_loadfs->remaining; + fpga_loadfs->remaining =0 ; + } + + ret = request_firmware_into_buf(dev, + fpga_loadfs->fpga_fsinfo-Quoted 2 lines
filename,
drivers/fpga/socfpga_arria10.c +4
-0+ buffer_p, *buffer_bsize, + fpga_loadfs->offset); +if (ret <0 ) { + debug("FPGA: Failed to read bitstream fromflash.\n");
drivers/fpga/socfpga_arria10.c +10
-0+return -ENOENT ; + } + +/* Update next reading bitstream offset */ + fpga_loadfs->offset += *buffer_bsize; + +return 0 ; +} + +int socfpga_loadfs(fpga_fs_info *fpga_fsinfo, const void *buf,
size_tbsize,drivers/fpga/socfpga_arria10.c +17
-0+ u32 offset) +{ +struct fpga_loadfs_info fpga_loadfs; +struct udevice *dev; +int status, ret, size; +u32 buffer = (uintptr_t )buf; +size_t buffer_sizebytes = bsize; +size_t buffer_sizebytes_ori = bsize; +size_t total_sizeof_image =0 ; +ofnode node; +const fdt32_t *phandle_p; +u32 phandle; + + node =get_fpga_mgr_ofnode (ofnode_null ()); + +if (ofnode_valid (node)) { + phandle_p = ofnode_get_property(node, "firmware-loader", &size);
drivers/fpga/socfpga_arria10.c +4
-0+if (!phandle_p) { + node =ofnode_path ("/chosen" ); +if (!ofnode_valid (node)) { + debug("FPGA: /chosen node was notfound.\n");
drivers/fpga/socfpga_arria10.c +4
-0+return -ENOENT ; + } + + phandle_p = ofnode_get_property(node,"firmware-loader",
drivers/fpga/socfpga_arria10.c +3
-0+ &size); +if (!phandle_p) { + debug("FPGA: firmware-loaderproperty was not");
drivers/fpga/socfpga_arria10.c +11
-0+debug (" found.\n" ); +return -ENOENT ; + } + } + }else { +debug ("FPGA: FPGA manager node was not found.\n" ); +return -ENOENT ; + } + + phandle =fdt32_to_cpu (*phandle_p); + ret =uclass_get_device_by_phandle_id(UCLASS_FS_FIRMWARE_LOADER,
drivers/fpga/socfpga_arria10.c +13
-0+ phandle, &dev); +if (ret) +return ret; + +memset (&fpga_loadfs,0 ,sizeof (fpga_loadfs)); + + fpga_loadfs.fpga_fsinfo = fpga_fsinfo; + fpga_loadfs.offset = offset; + +printf ("FPGA: Checking FPGA configuration setting ...\n" ); + +/* +* Note: Both buffer and buffer_sizebytes values can be altered by
drivers/fpga/socfpga_arria10.c +3
-0+* function below. +*/ + ret = first_loading_rbf_to_buffer(dev, &fpga_loadfs,&buffer,
drivers/fpga/socfpga_arria10.c +10
-0+ &buffer_sizebytes); +if (ret ==1 ) { +printf ("FPGA: Skipping configuration ...\n" ); +return 0 ; + }else if (ret) { +return ret; + } + + if (fpga_loadfs.rbfinfo.section == core_section && + !(is_fpgamgr_early_user_mode() &&!is_fpgamgr_user_mode())) {
+ debug("FPGA : Must be in Early Release mode to
program ");drivers/fpga/socfpga_arria10.c +5
-0+debug ("core bitstream.\n" ); +return -EPERM ; + } + +/* Disable all signals from HPS peripheral controller to FPGA */
drivers/fpga/socfpga_arria10.c +3
-0+writel (0 , &system_manager_base->fpgaintf_en_global); + +/* Disable all axi bridges (hps2fpga, lwhps2fpga & fpga2hps) */
drivers/fpga/socfpga_arria10.c +5
-0+socfpga_bridges_reset (); + +if (fpga_loadfs.rbfinfo.section == periph_section) { +/* Initialize the FPGA Manager */ + status = fpgamgr_program_init((u32 *)buffer,
buffer_sizebytes);drivers/fpga/socfpga_arria10.c +2
-0+if (status) { + debug("FPGA: Init with peripheralbitstream failed.\n");
drivers/fpga/socfpga_arria10.c +12
-0+return -EPERM ; + } + } + +/* Transfer bitstream to FPGA Manager */ +fpgamgr_program_write ((void *)buffer, buffer_sizebytes); + + total_sizeof_image += buffer_sizebytes; + +while (fpga_loadfs.remaining) { + ret =subsequent_loading_rbf_to_buffer (dev, + &fpga_loadfs,
drivers/fpga/socfpga_arria10.c +2
-0+ &buffer, + &buffer_si
zebytes_ori);drivers/fpga/socfpga_arria10.c +15
-0+ +if (ret) +return ret; + +/* Transfer data to FPGA Manager */ +fpgamgr_program_write ((void *)buffer, + buffer_sizebytes_ori); + + total_sizeof_image += buffer_sizebytes_ori; + +WATCHDOG_RESET (); + } + +if (fpga_loadfs.rbfinfo.section == periph_section) { +if (fpgamgr_wait_early_user_mode () != -ETIMEDOUT ){
drivers/fpga/socfpga_arria10.c +4
-0+config_pins (gd->fdt_blob,"shared" ); +puts ("FPGA: Early Release Succeeded.\n" ); + }else { + debug("FPGA: Failed to see EarlyRelease.\n");
drivers/fpga/socfpga_arria10.c +23
-0+return -EIO ; + } + +/* For monolithic bitstream */ +if (is_fpgamgr_user_mode ()) { +/* Ensure the FPGA entering config done */ + status =fpgamgr_program_finish (); +if (status) +return status; + +config_pins (gd->fdt_blob,"fpga" ); +puts ("FPGA: Enter user mode.\n" ); + } + }else if (fpga_loadfs.rbfinfo.section == core_section) { +/* Ensure the FPGA entering config done */ + status =fpgamgr_program_finish (); +if (status) +return status; + +config_pins (gd->fdt_blob,"fpga" ); +puts ("FPGA: Enter user mode.\n" ); + }else { + debug("FPGA: Config Error: Unsupported bitstreamtype.\n");
drivers/fpga/socfpga_arria10.c +7
-0+return -ENOEXEC ; + } + +return (int )total_sizeof_image; +} + +void fpgamgr_program(const void *buf, size_t bsize, u32offset)
drivers/fpga/socfpga_arria10.c +11
-0+{ +fpga_fs_info fpga_fsinfo; + + fpga_fsinfo.filename =get_fpga_filename (); + +if (fpga_fsinfo.filename) +socfpga_loadfs (&fpga_fsinfo, buf, bsize, offset); +} +#endif + +/* This function is used to load the core bitstream from the OCRAM. */
int socfpga_load(Altera_desc *desc, const void*rbf_data,size_trbf_size)
{drivers/fpga/socfpga_arria10.c +4
-1-int status; +unsigned long status; +struct rbf_info rbfinfo; + +memset (&rbfinfo,0 ,sizeof (rbfinfo));/* Disable all signals from hps peripheral controller to fpga */
writel(0, &system_manager_base->fpgaintf_en_global);drivers/fpga/socfpga_arria10.c +0
-0@@ -462,13 +915,31 @@ int socfpga_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size)/* Disable all axi bridge (hps2fpga, lwhps2fpga & fpga2hps) */
socfpga_bridges_reset();drivers/fpga/socfpga_arria10.c +6
-4-/* Initialize the FPGA Manager */ - status =fpgamgr_program_init ((u32 *)rbf_data, rbf_size); -if (status) -return status; +/* Getting info about bitstream types */ +get_rbf_image_info (&rbfinfo, (u16 *)rbf_data); + +if (rbfinfo.section == periph_section) { +/* Initialize the FPGA Manager */ + status = fpgamgr_program_init((u32 *)rbf_data,
rbf_size);drivers/fpga/socfpga_arria10.c +5
-1+if (status) +return status; + } -/* Write the RBF data to FPGA Manager */ + if (rbfinfo.section == core_section && + !(is_fpgamgr_early_user_mode() &&!is_fpgamgr_user_mode())) {
+ debug("FPGA : Must be in early release mode to
program ");drivers/fpga/socfpga_arria10.c +12
-1+debug ("core bitstream.\n" ); +return -EPERM ; + } + +/* Write the bitstream to FPGA Manager */ fpgamgr_program_write (rbf_data, rbf_size); -return fpgamgr_program_finish (); + status =fpgamgr_program_finish (); +if (status) { +config_pins (gd->fdt_blob,"fpga" ); +puts ("FPGA: Enter user mode.\n" ); + } + +return status; }include/image.h +4
-0@@ -1046,6 +1046,10 @@ int fit_check_format(const void *fit);int fit_conf_find_compat (const void *fit,const void *fdt);int fit_conf_get_node (const void *fit,const char *conf_uname); +int fit_conf_get_prop_node_count (const void *fit,int noffset, +const char *prop_name); +int fit_conf_get_prop_node_index (const void *fit,int noffset, +const char *prop_name,int index);/** *
fit_conf_get_prop_node()- Get node refered to by a
configuration
Chee
PATCH v12 5/9 ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Quoted 64 lines · Simon Goldschmidt
Quoted 62 lines · Tien Fong
Quoted 46 lines · Simon Goldschmidt
Quoted 43 lines · Tien Fong
Quoted 39 lines · Simon Goldschmidt
Quoted 29 lines · tien.fong.chee at intel.com
From: Tien Fong Chee <[email protected]>
Add FPGA driver to support program FPGA with FPGA bitstream loading
from
filesystem. The driver are designed based on generic firmware
loader
framework. The driver can handle FPGA program operation from
loading FPGA
bitstream in flash to memory and then to program FPGA.Signed-off-by Tien Fong Chee <[email protected]>---
changes for v12
- No changes.changes for v11
- No changes.changes for v10
(quoted diff) +0
-2-Cleaned up the codes. -Return -EPERM when programing core on non early IO releaseQuoted 2 lines
mode. >
-Using live function to get rid of gd->You got rid of gd-> in v10? How come I see numerous references to
it
below?Quoted 7 lines
Quoted 2 lines
get rid of using
gd->fdt_blobfor finding thenode_offset. Details in https://patchwork.ozlabs.org/patch/1044415/Ah, ok. But still, here you're introducing yet more references to gd-
Quoted 2 lines
fdt_blob.That wouldn't work with a live tree, either, or would it?
Yeah, few direct call to
config_pinfunction are still using gd-fdt_blobas argument. But, i'm not sure i should fix this function in
this series patch set, or separately patch after this series patch set?
Quoted 8 lines
Quoted 1 line
What do you think?
While I do have a strong opinion that this should be cleaned up, it would be kind of off-topic in this patch. I was just confused by the
version log.Regards,
Simon
Okay, how about we keep these changes. I will send out the fix separately after this patch set.
Thanks.
Quoted 900 lines
Quoted 900 lines
Thanks,
TFQuoted 895 lines
Quoted 895 lines
-/*
- * FPGA Manager to program the FPGA. This is the interface used by
FPGA driver.
- * Return 0 for sucess, non-zero for error.
- */(quoted diff) +5
-0+ofnode get_fpga_mgr_ofnode(void) +{ + int node_offset; + + fdtdec_find_aliases_for_id(gd->fdt_blob, "fpga_mgr",nit: using of live functions would be better to get rid of gd-
Quoted 1 line
.
+ COMPAT_ALTERA_SOCFPGA_FPGA0, + &node_offset, 1);
Thanks.
Quoted 871 lines
Quoted 871 lines
-Removed @0 for fs-loader node
changes for v9
- Support data offset
- Added default DDR load address
- Squashed theimage.h
- Changed to phandle
- Ensure the DDR is fully up running by checking the gd-Quoted 1 line
ram
changes for v8
- Added codes to discern bitstream type based on fpga node name.changes for v7
- Restructure the FPGA driver to support both peripheral bitstream
and core
bitstream bundled into FIT image.
- Support loadable property for core bitstream. User can set
loadable
in DDR for better performance. This loading would be done in
one
large
chunk instead of chunk by chunk loading with small memory
buffer.
---
arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts | 17 +
.../include/mach/fpga_manager_arria10.h | 39+- drivers/fpga/socfpga_arria10.c | 497 ++++++++++++++++++++- include/image.h | 4 + 4 files changed, 542 insertions(+), 15 deletions(-)arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts +17
-0@@ -18,6 +18,23 @@ /dts-v1/; #include "socfpga_arria10_socdk.dtsi" +/ { + chosen { + firmware-loader = <&fs_loader0>; + }; + + fs_loader0: fs-loader { + u-boot,dm-pre-reloc; + compatible = "u-boot,fs-loader"; + phandlepart = <&mmc 1>; + }; +}; + +&fpga_mgr { + u-boot,dm-pre-reloc; + altr,bitstream = "fit_spl_fpga.itb"; +}; + &mmc { u-boot,dm-pre-reloc; status = "okay";(quoted diff) +0
-0
socfpga/include/mach/fpga_manager_arria10.h
b/arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h
index09d13f6fd3..c5f67714aa100644
--- a/arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h
+++ b/arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.harch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +1
-1@@ -1,9 +1,13 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* -* Copyright (C) 2017 Intel Corporation <www.intel.com> +* Copyright (C) 2017-2019 Intel Corporation <www.intel.co m>
* All rights reserved.
*/arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +4
-0+#include <asm/cache.h> +#include <altera.h> +#include <image.h> +#ifndef _FPGA_MANAGER_ARRIA10_H_
#define _FPGA_MANAGER_ARRIA10_H_(quoted diff) +0
-0@@ -51,6 +55,10 @@ #define ALT_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SET_MSK BIT(24) #define ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_LSB16
arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +4
-0+#define FPGA_SOCFPGA_A10_RBF_UNENCRYPTED 0xa65c +#define FPGA_SOCFPGA_A10_RBF_ENCRYPTED 0xa65d +#define FPGA_SOCFPGA_A10_RBF_PERIPH 0x0001 +#define FPGA_SOCFPGA_A10_RBF_CORE 0x8001#ifndef
__ASSEMBLY__struct
socfpga_fpga_manager{arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +24
-0@@ -88,12 +96,39 @@ struct socfpga_fpga_manager { u32 imgcfg_fifo_status; }; +enum rbf_type { + unknown, + periph_section, + core_section +}; + +enum rbf_security { + invalid, + unencrypted, + encrypted +}; + +struct rbf_info { + enum rbf_type section; + enum rbf_security security; +}; + +struct fpga_loadfs_info { + fpga_fs_info *fpga_fsinfo; + u32 remaining; + u32 offset; + struct rbf_info rbfinfo; +}; + /* Functions */int fpgamgr_program_init(u32 *
rbf_data,size_trbf_size);
intfpgamgr_program_finish(void);
intis_fpgamgr_user_mode(void);
intfpgamgr_wait_early_user_mode(void);arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +2
-1- +const char *get_fpga_filename (void ); +int socfpga_loadfs(fpga_fs_info *fpga_fsinfo, const void*buf,
size_tbsize,
+ u32 offset);
+voidfpgamgr_program(const void *buf, size_t bsize, u32 offset);
#endif /*__ASSEMBLY__*/#endif /* _FPGA_MANAGER_ARRIA10_H_ */
drivers/fpga/socfpga_arria10.c +1
-1@@ -1,8 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /* -* Copyright (C) 2017 Intel Corporation <www.intel.com> +* Copyright (C) 2017-2019 Intel Corporation <www.intel.co m>
*/
-
#include <asm/io.h>
#include <asm/arch/fpga_manager.h>
#include <asm/arch/reset_manager.h>drivers/fpga/socfpga_arria10.c +6
-0@@ -10,8 +9,11 @@ #include <asm/arch/sdram.h> #include <asm/arch/misc.h> #include <altera.h> +#include <asm/arch/pinmux.h> #include <common.h> +#include <dm/ofnode.h> #include <errno.h> +#include <fs_loader.h> #include <wait_bit.h> #include <watchdog.h>@@ -21,6 +23,9 @@ #define COMPRESSION_OFFSET 229 #define FPGA_TIMEOUT_MSEC 1000 /* timeout in ms */ #define FPGA_TIMEOUT_CNT 0x1000000 +#define DEFAULT_DDR_LOAD_ADDRESS 0x400 + +DECLARE_GLOBAL_DATA_PTR ;static const struct
socfpga_fpga_manager*fpga_manager_base=
(void *)SOCFPGA_FPGAMGRREGS_ADDRESS;drivers/fpga/socfpga_arria10.c +0
-2@@ -448,13 +453,461 @@ int fpgamgr_program_finish(void) return 0; } -/* -* FPGA Manager to program the FPGA. This is the interface used by
FPGA driver.
- * Return 0 for sucess, non-zero for error.
- */drivers/fpga/socfpga_arria10.c +3
-0+ofnode get_fpga_mgr_ofnode (ofnode from) +{ + return ofnode_by_compatible(from, "altr,socfpga-a10-fpga-
mgr");drivers/fpga/socfpga_arria10.c +7
-0+} + +const char *get_fpga_filename (void ) +{ + const char *fpga_filename = NULL; + + ofnode fpgamgr_node =get_fpga_mgr_ofnode(ofnode_null());
+
+ if (ofnode_valid(fpgamgr_node))
+ fpga_filename = ofnode_read_string(fpgamgr_node,
+ "altr,bitstream ");drivers/fpga/socfpga_arria10.c +5
-0+ + return fpga_filename; +} + +static void get_rbf_image_info(struct rbf_info *rbf, u16*buffer)
drivers/fpga/socfpga_arria10.c +12
-0+{ + /* + * Magic ID starting at: + * -> 1st dword[15:0] in periph.rbf + * -> 2nd dword[15:0] in core.rbf + * Note: dword == 32 bits + */ + u32 word_reading_max = 2; + u32 i; + + for (i = 0; i < word_reading_max; i++) { + if (*(buffer + i) ==
FPGA_SOCFPGA_A10_RBF_UNENCRYPTED) {
+ rbf->security = unencrypted;
+ } else if (*(buffer + i) ==FPGA_SOCFPGA_A10_RBF_ENCRYPTED) {
+ rbf->security = encrypted;
+ } else if (*(buffer + i + 1) ==
+ FPGA_SOCFPGA_A10_RBF_UNENCRYPTE
D)
{
+ rbf->security = unencrypted;
+ } else if (*(buffer + i + 1) ==
+ FPGA_SOCFPGA_A10_RBF_ENCRYPTED) {
+ rbf->security = encrypted;
+ } else {
+ rbf->security = invalid;
+ continue;
+ }
+
+ /* PERIPH RBF(buffer + i + 1), CORE RBF(buffer
+ i
+ 2) */
+ if (*(buffer + i + 1) ==FPGA_SOCFPGA_A10_RBF_PERIPH) {
+ rbf->section =periph_section; + break;
+ } else if (*(buffer + i + 1) ==FPGA_SOCFPGA_A10_RBF_CORE) {
+ rbf->section =core_section;
+ break;
+ } else if (*(buffer + i + 2) ==FPGA_SOCFPGA_A10_RBF_PERIPH) {
+ rbf->section =periph_section; + break;
+ } else if (*(buffer + i + 2) ==FPGA_SOCFPGA_A10_RBF_CORE) {
+ rbf->section =core_section;
+ break;
+ }drivers/fpga/socfpga_arria10.c +10
-0+ + rbf->section = unknown; + break; + + WATCHDOG_RESET(); + } +} + +#ifdef CONFIG_FS_LOADER +static int first_loading_rbf_to_buffer(struct udevice*dev,
+ structfpga_loadfs_info*fpga_loadfs,
+ u32 *buffer,size_t*buffer_bsize)
+{
+ u32*buffer_p= (u32 *)*buffer;
+ u32 *loadable =buffer_p;
+ size_tbuffer_size=*buffer_bsize;
+ size_tfit_size;
+ int ret, i, count,confs_noffset,images_noffset,rbf_offset,rbf_size;
+ const char*fpga_node_name= NULL;
+ const char *uname = NULL;
+
+ /* Load image header into buffer */
+ ret = request_firmware_into_buf(dev,
+ fpga_loadfs-Quoted 4 lines
fpga_fsinfo-
filename,
+ buffer_p,
sizeof(struct image_header),
+ 0);
+ if (ret < 0) {
+ debug("FPGA: Failed to read image header from flash.\n");
+ return-ENOENT;
+ }
+
+ if (image_get_magic((struct image_header *)buffer_p)!=FDT_MAGIC) {
+ debug("FPGA: No FDT magic was found.\n"); + return-EBADF;
+ }drivers/fpga/socfpga_arria10.c +5
-0+ + fit_size = fdt_totalsize(buffer_p); + + if (fit_size > buffer_size) { + debug("FPGA: FIT image is larger than availablebuffer.\n");
+ debug("Please use FIT external data or increasing
buffer.\n");
+ return-ENOMEM;
+ }
+
+ /* Load entire FIT into buffer */
+ ret = request_firmware_into_buf(dev,
+ fpga_loadfs-Quoted 4 lines
fpga_fsinfo-
filename,
+ buffer_p,
fit_size, 0); + if (ret < 0)
+ return ret;drivers/fpga/socfpga_arria10.c +8
-0+ + ret = fit_check_format(buffer_p); + if (!ret) { + debug("FPGA: No valid FIT image was found.\n"); + return -EBADF; + } + + confs_noffset = fdt_path_offset(buffer_p,
FIT_CONFS_PATH);
+ images_noffset =fdt_path_offset(buffer_p, FIT_IMAGES_PATH);
+ if (confs_noffset< 0 ||images_noffset< 0) { + debug("FPGA: No Configurations or images nodes were found.\n");
+ return-ENOENT;
+ }
+
+ /* Get default configuration unit name from default property */
+ confs_noffset =fit_conf_get_node(buffer_p, NULL); + if (confs_noffset< 0) {
+ debug("FPGA: No default configuration was found in
config.\n");
+ return-ENOENT;
+ }
+
+ count = fit_conf_get_prop_node_count(buffer_p,confs_noffset,
+ FIT_FPGA_PROP); + if (count < 0) {
+ debug("FPGA: Invalid configuration format for FPGA
node.\n");
+ return count;
+ }
+ debug("FPGA: FPGA node count: %d\n", count);
+
+ for (i = 0; i < count; i++) {
+ images_noffset = fit_conf_get_prop_node_index(buffer_p,
+ co nfs_noffset,
+ FIT_FPGA_PROP, i);
+ uname =fit_get_name(buffer_p, images_noffset, NULL);
+ if (uname) {
+ debug("FPGA: %s\n", uname);
+
+ if (strstr(uname, "fpga-periph")&& + (!is_fpgamgr_early_user_mode() ||
+ is_fpgamgr_user_mode())) { + fpga_node_name = uname; + printf("FPGA: Start to program ");
+ printf("peripheral/full bitstream
...\n");
+ break;
+ } else if (strstr(uname, "fpga-core")&&
+ (is_fpgamgr_early_user_ mode()&&
+ !is_fpgamgr_user_mode() ))
{
+ fpga_node_name = uname; + printf("FPGA: Start to program core ");
+ printf("bitstream ...\n"); + break;
+ }
+ }
+ WATCHDOG_RESET();
+ }
+
+ if (!fpga_node_name) {
+ debug("FPGA: No suitable bitstream was found,
count: %d.\n", i);
+ return 1;
+ }
+
+ images_noffset =fit_image_get_node(buffer_p, fpga_node_name);
+ if (images_noffset< 0) {
+ debug("FPGA: No node '%s' was found in FIT.\n", + fpga_node_name);
+ return-ENOENT;
+ }
+
+ if (!fit_image_get_data_position(buffer_p,images_noffset,
+ &rbf_offset)) { + debug("FPGA: Data position was found.\n"); + } else if (!fit_image_get_data_offset(buffer_p,images_noffset,
+ &rbf_offset)) {
+ /*
+ * For FIT with external data, figure out where + * the external images start. This is the base + * for the data-offset properties in each image.
+ */
+ rbf_offset += ((fdt_totalsize(buffer_p)+ 3) & ~3);
+ debug("FPGA: Data offset was found.\n"); + } else {
+ debug("FPGA: No data position/offset was found.\n");
+ return-ENOENT;
+ }
+
+ ret =fit_image_get_data_size(buffer_p, images_noffset, &rbf_size);
+ if (ret < 0) {
+ debug("FPGA: No data size was found (err=%d).\n",
ret);
+ return-ENOENT;
+ }
+
+ if (gd->ram_size<rbf_size) {
+ debug("FPGA: Using default OCRAM buffer and size.\n");
+ } else {
+ ret = fit_image_get_load(buffer_p,images_noffset,
+ (ulong *)loadable); + if (ret < 0) {
+ buffer_p = (u32 *)DEFAULT_DDR_LOAD_ADDRESS;
+ debug("FPGA: No loadable was found.\n");
+ debug("FPGA: Using default DDR load
address: 0x%x .\n",
+ DEFAULT_DDR_LOAD_ADDRESS); + } else {
+ buffer_p = (u32 *)*loadable;
+ debug("FPGA: Found loadable address = 0x%x.\n",
+ *loadable);
+ }drivers/fpga/socfpga_arria10.c +5
-0+ + buffer_size = rbf_size; + } + + debug("FPGA: External data: offset = 0x%x, size =0x%x.\n",
+ rbf_offset,rbf_size);drivers/fpga/socfpga_arria10.c +5
-0+ + fpga_loadfs->remaining = rbf_size; + + /* +* Determine buffer size vs bitstream size, and calculating number of
+ * chunk by chunk transfer is required due to smaller buffer size
+ * compare to bitstream
+ */
+ if (rbf_size<=buffer_size) {
+ /* Loading whole bitstream into buffer */ + buffer_size =rbf_size;
+ fpga_loadfs->remaining = 0;
+ } else {
+ fpga_loadfs->remaining -=buffer_size; + }
+
+ fpga_loadfs->offset =rbf_offset;
+ /* Loading bitstream into buffer */
+ ret = request_firmware_into_buf(dev,
+ fpga_loadfs-Quoted 4 lines
fpga_fsinfo-
filename,
+ buffer_p,
buffer_size, + fpga_loadfs->offset); + if (ret < 0) {
+ debug("FPGA: Failed to read bitstream from flash.\n");
+ return-ENOENT;
+ }
+
+ /* Getting info about bitstream types */
+ get_rbf_image_info(&fpga_loadfs->rbfinfo, (u16 *)buffer_p);drivers/fpga/socfpga_arria10.c +8
-0+ + /* Update next reading bitstream offset */ + fpga_loadfs->offset += buffer_size; + + /* Update the final addr for bitstream */ + *buffer = (u32)buffer_p; + + /* Update the size of bitstream to be programmed intoFPGA
*/
+ *buffer_bsize =buffer_size;drivers/fpga/socfpga_arria10.c +5
-0+ + return 0; +} + +static int subsequent_loading_rbf_to_buffer(struct udevice*dev,
+ structfpga_loadfs_info*fpga_loadfs,
+ u32 *buffer,size_t*buffer_bsize)drivers/fpga/socfpga_arria10.c +14
-0+{ + int ret = 0; + u32 *buffer_p = (u32 *)*buffer; + + /* Read the bitstream chunk by chunk. */ + if (fpga_loadfs->remaining > *buffer_bsize) { + fpga_loadfs->remaining -= *buffer_bsize; + } else { + *buffer_bsize = fpga_loadfs->remaining; + fpga_loadfs->remaining = 0; + } + + ret = request_firmware_into_buf(dev, + fpga_loadfs-Quoted 4 lines
fpga_fsinfo-
filename,
+ buffer_p,
*buffer_bsize,
+ fpga_loadfs->offset); + if (ret < 0) {
+ debug("FPGA: Failed to read bitstream from flash.\n");
+ return-ENOENT;
+ }drivers/fpga/socfpga_arria10.c +8
-0+ + /* Update next reading bitstream offset */ + fpga_loadfs->offset += *buffer_bsize; + + return 0; +} + +int socfpga_loadfs(fpga_fs_info *fpga_fsinfo, const void*buf,
size_tbsize,
+ u32 offset)drivers/fpga/socfpga_arria10.c +16
-0+{ + struct fpga_loadfs_info fpga_loadfs; + struct udevice *dev; + int status, ret, size; + u32 buffer = (uintptr_t)buf; + size_t buffer_sizebytes = bsize; + size_t buffer_sizebytes_ori = bsize; + size_t total_sizeof_image = 0; + ofnode node; + const fdt32_t *phandle_p; + u32 phandle; + + node = get_fpga_mgr_ofnode(ofnode_null()); + + if (ofnode_valid(node)) { + phandle_p = ofnode_get_property(node,"firmware-
loader", &size);
+ if (!phandle_p) {
+ node =ofnode_path("/chosen"); + if (!ofnode_valid(node)) {
+ debug("FPGA: /chosen node was not
found.\n");
+ return-ENOENT;
+ }
+
+ phandle_p = ofnode_get_property(node, "firmware-loader",
+ &size); + if (!phandle_p) {
+ debug("FPGA: firmware-loader property was not");
+ debug(" found.\n");
+ return-ENOENT;
+ }
+ }
+ } else {
+ debug("FPGA: FPGA manager node was not found.\n");
+ return-ENOENT;
+ }
+
+ phandle =fdt32_to_cpu(*phandle_p);
+ ret = uclass_get_device_by_phandle_id(UCLASS_FS_FIRMWARE_LOADER, + phandle, &dev); + if (ret)
+ return ret;drivers/fpga/socfpga_arria10.c +7
-0+ + memset(&fpga_loadfs, 0, sizeof(fpga_loadfs)); + + fpga_loadfs.fpga_fsinfo = fpga_fsinfo; + fpga_loadfs.offset = offset; + + printf("FPGA: Checking FPGA configuration setting...\n");
+
+ /*
+ * Note: Both buffer andbuffer_sizebytesvalues can be altered by
+ * function below.
+ */
+ ret = first_loading_rbf_to_buffer(dev,&fpga_loadfs, &buffer,
+ &buffer_sizebytes); + if (ret == 1) {
+ printf("FPGA: Skipping configuration ...\n"); + return 0;
+ } else if (ret) {
+ return ret;
+ }
+
+ if (fpga_loadfs.rbfinfo.section ==core_section&& + !(is_fpgamgr_early_user_mode() && !is_fpgamgr_user_mode())) {
+ debug("FPGA : Must be in Early Release mode to program ");
+ debug("core bitstream.\n");
+ return-EPERM;
+ }
+
+ /* Disable all signals from HPS peripheral controller to
FPGA */
+ writel(0,&system_manager_base->fpgaintf_en_global); +
+ /* Disable all axi bridges (hps2fpga, lwhps2fpga & fpga2hps) */
+ socfpga_bridges_reset();
+
+ if (fpga_loadfs.rbfinfo.section ==periph_section) { + /* Initialize the FPGA Manager */
+ status =fpgamgr_program_init((u32 *)buffer, buffer_sizebytes);
+ if (status) {
+ debug("FPGA: Init with peripheral bitstream failed.\n");
+ return-EPERM;
+ }
+ }
+
+ /* Transfer bitstream to FPGA Manager */
+ fpgamgr_program_write((void *)buffer,buffer_sizebytes);drivers/fpga/socfpga_arria10.c +6
-0+ + total_sizeof_image += buffer_sizebytes; + + while (fpga_loadfs.remaining) { + ret = subsequent_loading_rbf_to_buffer(dev, + &fpga_load
fs,
+ &buffer ,
+ &buffer_sizebytes_ori);drivers/fpga/socfpga_arria10.c +15
-1+ + if (ret) + return ret; + + /* Transfer data to FPGA Manager */ + fpgamgr_program_write((void *)buffer, + buffer_sizebytes_ori); + + total_sizeof_image += buffer_sizebytes_ori; + + WATCHDOG_RESET(); + } + + if (fpga_loadfs.rbfinfo.section == periph_section) { + if (fpgamgr_wait_early_user_mode() != -ETIMEDOUT){
+ config_pins(gd->fdt_blob, "shared"); + puts("FPGA: Early Release Succeeded.\n");
+ } else {
+ debug("FPGA: Failed to see Early Release.\n");
+ return-EIO;
+ }
+
+ /* For monolithic bitstream */
+ if (is_fpgamgr_user_mode()) {
+ /* Ensure the FPGA entering config done */
+ status =fpgamgr_program_finish(); + if (status)
+ return status;
+
+ config_pins(gd->fdt_blob, "fpga"); + puts("FPGA: Enter user mode.\n"); + }
+ } else if (fpga_loadfs.rbfinfo.section ==core_section) {
+ /* Ensure the FPGA entering config done */ + status =fpgamgr_program_finish();
+ if (status)
+ return status;
+
+ config_pins(gd->fdt_blob, "fpga");
+ puts("FPGA: Enter user mode.\n");
+ } else {
+ debug("FPGA: Config Error: Unsupported bitstream
type.\n");
+ return-ENOEXEC;
+ }drivers/fpga/socfpga_arria10.c +5
-0+ + return (int)total_sizeof_image; +} + +void fpgamgr_program(const void *buf, size_t bsize, u32offset)
drivers/fpga/socfpga_arria10.c +7
-0+{ + fpga_fs_info fpga_fsinfo; + + fpga_fsinfo.filename = get_fpga_filename(); + + if (fpga_fsinfo.filename) + socfpga_loadfs(&fpga_fsinfo, buf, bsize,offset);
drivers/fpga/socfpga_arria10.c +4
-0+} +#endif + +/* This function is used to load the core bitstream from the
OCRAM. */
int socfpga_load(Altera_desc *desc, const void*rbf_data,size_trbf_size)
{
- int status;
+ unsigned long status;
+ structrbf_inforbfinfo;
+
+ memset(&rbfinfo, 0, sizeof(rbfinfo));/* Disable all signals from hps peripheral controller to
fpga */
writel(0,&system_manager_base->fpgaintf_en_global);drivers/fpga/socfpga_arria10.c +0
-0@@ -462,13 +915,31 @@ int socfpga_load(Altera_desc *desc,const
void*rbf_data,size_trbf_size)
/* Disable all axi bridge (hps2fpga, lwhps2fpga & fpga2hps) */
socfpga_bridges_reset();- /* Initialize the FPGA Manager */
- status =fpgamgr_program_init((u32 *)rbf_data, rbf_size);
- if (status)
- return status;
+ /* Getting info about bitstream types */
+ get_rbf_image_info(&rbfinfo, (u16 *)rbf_data); +
+ if (rbfinfo.section ==periph_section) {
+ /* Initialize the FPGA Manager */
+ status =fpgamgr_program_init((u32 *)rbf_data, rbf_size);
+ if (status)
+ return status;
+ }- /* Write the RBF data to FPGA Manager */
+ if (rbfinfo.section ==core_section&&
+ !(is_fpgamgr_early_user_mode() && !is_fpgamgr_user_mode())) {
+ debug("FPGA : Must be in early release mode to program ");
+ debug("core bitstream.\n");
+ return-EPERM;
+ }
+
+ /* Write the bitstream to FPGA Manager */fpgamgr_program_write(rbf_data, rbf_size);- return
fpgamgr_program_finish();
+ status =fpgamgr_program_finish();
+ if (status) {
+ config_pins(gd->fdt_blob, "fpga");
+ puts("FPGA: Enter user mode.\n");
+ }
+
+ return status;
}include/image.h +0
-0@@ -1046,6 +1046,10 @@ int fit_check_format(const void *fit);int
fit_conf_find_compat(const void *fit, const void *fdt);
intfit_conf_get_node(const void *fit, const char *conf_uname);
+int fit_conf_get_prop_node_count(const void *fit, int noffset,
+ const char*prop_name);
+int fit_conf_get_prop_node_index(const void *fit, int noffset,
+ const char*prop_name, int index);/**
*fit_conf_get_prop_node()- Get node refered to by a configuration
PATCH v12 5/9 ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Quoted 72 lines · Tien Fong
Quoted 70 lines · Simon Goldschmidt
Quoted 55 lines · Tien Fong
Quoted 52 lines · Simon Goldschmidt
Quoted 43 lines · Tien Fong
Quoted 30 lines · Simon Goldschmidt
Quoted 26 lines · tien.fong.chee at intel.com
From: Tien Fong Chee <[email protected]>
Add FPGA driver to support program FPGA with FPGA bitstream loading
from
filesystem. The driver are designed based on generic firmware
loader
framework. The driver can handle FPGA program operation from
loading FPGA
bitstream in flash to memory and then to program FPGA.Signed-off-by Tien Fong Chee <[email protected]>---
changes for v12
- No changes.changes for v11
- No changes.Quoted 9 lines
Quoted 5 lines
changes for v10
(quoted diff) +0
-2-Cleaned up the codes. -Return -EPERM when programing core on non early IO releasemode. >
-Using live function to get rid of gd->You got rid of gd-> in v10? How come I see numerous references to
it
below?Quoted 2 lines
get rid of using
gd->fdt_blobfor finding thenode_offset. Details in https://patchwork.ozlabs.org/patch/1044415/Ah, ok. But still, here you're introducing yet more references to gd-
Quoted 2 lines
fdt_blob.Quoted 8 lines
Quoted 1 line
That wouldn't work with a live tree, either, or would it?
Yeah, few direct call to
config_pinfunction are still using gd-fdt_blobas argument. But, i'm not sure i should fix this function in
this series patch set, or separately patch after this series patch set?What do you think?
While I do have a strong opinion that this should be cleaned up, it would be kind of off-topic in this patch. I was just confused by the
version log.
Quoted 4 lines
Quoted 2 lines
Regards,
SimonOkay, how about we keep these changes. I will send out the fix separately after this patch set.
That would be best, I think, yes.
Regards,
Simon
Quoted 902 lines
Thanks.
Quoted 900 lines
Quoted 900 lines
Thanks,
TFQuoted 895 lines
Quoted 895 lines
-/*
- * FPGA Manager to program the FPGA. This is the interface used by
FPGA driver.
- * Return 0 for sucess, non-zero for error.
- */(quoted diff) +5
-0+ofnode get_fpga_mgr_ofnode(void) +{ + int node_offset; + + fdtdec_find_aliases_for_id(gd->fdt_blob, "fpga_mgr",nit: using of live functions would be better to get rid of gd-
Quoted 1 line
.
(quoted diff) +2
-0+ COMPAT_ALTERA_SOCFPGA_FPGA0, + &node_offset, 1);Thanks.
Quoted 871 lines
Quoted 871 lines
-Removed @0 for fs-loader node
changes for v9
- Support data offset
- Added default DDR load address
- Squashed theimage.h
- Changed to phandle
- Ensure the DDR is fully up running by checking the gd-Quoted 1 line
ram
changes for v8
- Added codes to discern bitstream type based on fpga node name.changes for v7
- Restructure the FPGA driver to support both peripheral bitstream
and core
bitstream bundled into FIT image.
- Support loadable property for core bitstream. User can set
loadable
in DDR for better performance. This loading would be
done in
one
large
chunk instead of chunk by chunk loading with small
memory
buffer.--- arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts | 17(quoted diff) +4
-0+ .../include/mach/fpga_manager_arria10.h | 39 +- drivers/fpga/socfpga_arria10.c | 497 ++++++++++++++++++++- include/image.h | 4 + 4 files changed, 542 insertions(+), 15 deletions(-)arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts +17
-0@@ -18,6 +18,23 @@ /dts-v1/; #include "socfpga_arria10_socdk.dtsi" +/ { + chosen { + firmware-loader = <&fs_loader0>; + }; + + fs_loader0: fs-loader { + u-boot,dm-pre-reloc; + compatible = "u-boot,fs-loader"; + phandlepart = <&mmc 1>; + }; +}; + +&fpga_mgr { + u-boot,dm-pre-reloc; + altr,bitstream = "fit_spl_fpga.itb"; +}; + &mmc { u-boot,dm-pre-reloc; status = "okay";(quoted diff) +0
-0
socfpga/include/mach/fpga_manager_arria10.h
b/arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h
index09d13f6fd3..c5f67714aa100644
--- a/arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h
+++ b/arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h(quoted diff) +1
-1@@ -1,9 +1,13 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * Copyright (C) 2017 Intel Corporation <www.intel.com> + * Copyright (C) 2017-2019 Intel Corporation <www.intel.com>
* All rights reserved.
*/(quoted diff) +4
-0+#include <asm/cache.h> +#include <altera.h> +#include <image.h> + #ifndef _FPGA_MANAGER_ARRIA10_H_ #define _FPGA_MANAGER_ARRIA10_H_@@ -51,6 +55,10 @@ #define ALT_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SET_MSK BIT(24) #define ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_LSB16
(quoted diff) +32
-1+#define FPGA_SOCFPGA_A10_RBF_UNENCRYPTED 0xa65c +#define FPGA_SOCFPGA_A10_RBF_ENCRYPTED 0xa65d +#define FPGA_SOCFPGA_A10_RBF_PERIPH 0x0001 +#define FPGA_SOCFPGA_A10_RBF_CORE 0x8001 #ifndef __ASSEMBLY__ struct socfpga_fpga_manager {@@ -88,12 +96,39 @@ struct socfpga_fpga_manager { u32 imgcfg_fifo_status; }; +enum rbf_type { + unknown, + periph_section, + core_section +}; + +enum rbf_security { + invalid, + unencrypted, + encrypted +}; + +struct rbf_info { + enum rbf_type section; + enum rbf_security security; +}; + +struct fpga_loadfs_info { + fpga_fs_info *fpga_fsinfo; + u32 remaining; + u32 offset; + struct rbf_info rbfinfo; +}; + /* Functions */ int fpgamgr_program_init(u32 * rbf_data, size_t rbf_size); int fpgamgr_program_finish(void); int is_fpgamgr_user_mode(void); int fpgamgr_wait_early_user_mode(void); - +const char *get_fpga_filename(void); +int socfpga_loadfs(fpga_fs_info *fpga_fsinfo, const void *buf, size_t bsize, + u32 offset); +void fpgamgr_program(const void *buf, size_t bsize, u32offset);
#endif /*__ASSEMBLY__*/#endif /* _FPGA_MANAGER_ARRIA10_H_ */drivers/fpga/socfpga_arria10.c +1
-1@@ -1,8 +1,7 @@// SPDX-License-Identifier: GPL-2.0 /* -* Copyright (C) 2017 Intel Corporation <www.intel.com> +* Copyright (C) 2017-2019 Intel Corporation <www.intel.co m>
*/drivers/fpga/socfpga_arria10.c +6
-1-#include <asm/io.h> #include <asm/arch/fpga_manager.h> #include <asm/arch/reset_manager.h> @@ -10,8 +9,11 @@#include <asm/arch/sdram.h> #include <asm/arch/misc.h> #include <altera.h> +#include <asm/arch/pinmux.h> #include <common.h> +#include <dm/ofnode.h> #include <errno.h> +#include <fs_loader.h> #include <wait_bit.h> #include <watchdog.h> @@ -21,6 +23,9 @@#define COMPRESSION_OFFSET 229#define FPGA_TIMEOUT_MSEC 1000/* timeout in ms */ #define FPGA_TIMEOUT_CNT 0x1000000 +#define DEFAULT_DDR_LOAD_ADDRESS 0x400 + +DECLARE_GLOBAL_DATA_PTR ;static const struct socfpga_fpga_manager *fpga_manager_base =(void *)SOCFPGA_FPGAMGRREGS_ADDRESS;drivers/fpga/socfpga_arria10.c +0
-2@@ -448,13 +453,461 @@ int fpgamgr_program_finish(void)return 0 ; } -/* -* FPGA Manager to program the FPGA. This is the interface used by
FPGA driver.
- * Return 0 for sucess, non-zero for error.
- */drivers/fpga/socfpga_arria10.c +3
-0+ofnode get_fpga_mgr_ofnode (ofnode from) +{ + return ofnode_by_compatible(from, "altr,socfpga-a10-fpga-
mgr");drivers/fpga/socfpga_arria10.c +7
-0+} + +const char *get_fpga_filename (void ) +{ +const char *fpga_filename =NULL ; + + ofnode fpgamgr_node =get_fpga_mgr_ofnode(ofnode_null());
drivers/fpga/socfpga_arria10.c +3
-0+ +if (ofnode_valid (fpgamgr_node)) + fpga_filename =ofnode_read_string(fpgamgr_node,
+ "altr,bitstream
");drivers/fpga/socfpga_arria10.c +5
-0+ +return fpga_filename; +} + +static void get_rbf_image_info(struct rbf_info *rbf, u16*buffer)
drivers/fpga/socfpga_arria10.c +12
-0+{ +/* +* Magic ID starting at: +* -> 1st dword[15:0] in periph.rbf +* -> 2nd dword[15:0] in core.rbf +* Note: dword == 32 bits +*/ +u32 word_reading_max =2 ; +u32 i; + +for (i =0 ; i < word_reading_max; i++) { + if (*(buffer + i) ==
FPGA_SOCFPGA_A10_RBF_UNENCRYPTED) {drivers/fpga/socfpga_arria10.c +2
-0+ rbf->security = unencrypted; + } else if (*(buffer + i) ==
FPGA_SOCFPGA_A10_RBF_ENCRYPTED) {drivers/fpga/socfpga_arria10.c +3
-0+ rbf->security = encrypted; + }else if (*(buffer + i +1 ) == + FPGA_SOCFPGA_A10_RBF_UNENCRYPTED)
{drivers/fpga/socfpga_arria10.c +3
-0+ rbf->security = unencrypted; + }else if (*(buffer + i +1 ) == +FPGA_SOCFPGA_A10_RBF_ENCRYPTED ){
drivers/fpga/socfpga_arria10.c +10
-0+ rbf->security = encrypted; + }else { + rbf->security = invalid; +continue ; + } + +/* PERIPH RBF(buffer + i + 1), CORE RBF(buffer +i +2) */ + if (*(buffer + i + 1) ==
FPGA_SOCFPGA_A10_RBF_PERIPH) {drivers/fpga/socfpga_arria10.c +3
-0+ rbf->section = periph_section; +break ; + } else if (*(buffer + i + 1) ==
FPGA_SOCFPGA_A10_RBF_CORE) {drivers/fpga/socfpga_arria10.c +3
-0+ rbf->section = core_section; +break ; + } else if (*(buffer + i + 2) ==
FPGA_SOCFPGA_A10_RBF_PERIPH) {drivers/fpga/socfpga_arria10.c +3
-0+ rbf->section = periph_section; +break ; + } else if (*(buffer + i + 2) ==
FPGA_SOCFPGA_A10_RBF_CORE) {drivers/fpga/socfpga_arria10.c +13
-0+ rbf->section = core_section; +break ; + } + + rbf->section = unknown; +break ; + +WATCHDOG_RESET (); + } +} + +#ifdef CONFIG_FS_LOADER +static int first_loading_rbf_to_buffer(struct udevice*dev,
+ structfpga_loadfs_info*fpga_loadfs,
+ u32 *buffer,size_t*buffer_bsize)drivers/fpga/socfpga_arria10.c +6
-0+{ +u32 *buffer_p = (u32 *)*buffer; +u32 *loadable = buffer_p; +size_t buffer_size = *buffer_bsize; +size_t fit_size; + int ret, i, count, confs_noffset, images_noffset,
rbf_offset,rbf_size;drivers/fpga/socfpga_arria10.c +6
-0+const char *fpga_node_name =NULL ; +const char *uname =NULL ; + +/* Load image header into buffer */ + ret = request_firmware_into_buf(dev, + fpga_loadfs-Quoted 4 lines
fpga_fsinfo-
filename,
+
buffer_p, sizeof(structimage_header),drivers/fpga/socfpga_arria10.c +3
-0+ 0); +if (ret <0 ) { + debug("FPGA: Failed to read image header fromflash.\n");
drivers/fpga/socfpga_arria10.c +4
-0+return -ENOENT ; + } + + if (image_get_magic((struct image_header *)buffer_p) !=
FDT_MAGIC) {drivers/fpga/socfpga_arria10.c +8
-0+debug ("FPGA: No FDT magic was found.\n" ); +return -EBADF ; + } + + fit_size =fdt_totalsize (buffer_p); + +if (fit_size > buffer_size) { + debug("FPGA: FIT image is larger than availablebuffer.\n");
+ debug("Please use FIT external data or
increasing
buffer.\n");drivers/fpga/socfpga_arria10.c +6
-0+return -ENOMEM ; + } + +/* Load entire FIT into buffer */ + ret = request_firmware_into_buf(dev, + fpga_loadfs-Quoted 4 lines
fpga_fsinfo-
filename,
drivers/fpga/socfpga_arria10.c +11
-0+ buffer_p, fit_size, 0); +if (ret <0 ) +return ret; + + ret =fit_check_format (buffer_p); +if (!ret) { +debug ("FPGA: No valid FIT image was found.\n" ); +return -EBADF ; + } + + confs_noffset = fdt_path_offset(buffer_p,
FIT_CONFS_PATH);
+images_noffset= fdt_path_offset(buffer_p,FIT_IMAGES_PATH);drivers/fpga/socfpga_arria10.c +2
-0+if (confs_noffset <0 || images_noffset <0 ) { + debug("FPGA: No Configurations or images nodeswere found.\n");
drivers/fpga/socfpga_arria10.c +4
-0+return -ENOENT ; + } + +/* Get default configuration unit name from default property */
drivers/fpga/socfpga_arria10.c +3
-0+ confs_noffset =fit_conf_get_node (buffer_p,NULL ); +if (confs_noffset <0 ) { + debug("FPGA: No default configuration was foundin
config.\n");drivers/fpga/socfpga_arria10.c +4
-0+return -ENOENT ; + } + + count = fit_conf_get_prop_node_count(buffer_p,
confs_noffset,drivers/fpga/socfpga_arria10.c +3
-0+ FIT_FPGA_PROP); +if (count <0 ) { + debug("FPGA: Invalid configuration format forFPGA
node.\n");drivers/fpga/socfpga_arria10.c +6
-0+return count; + } +debug ("FPGA: FPGA node count: %d\n" , count); + +for (i =0 ; i < count; i++) { + images_noffset =fit_conf_get_prop_node_index(buffer_p,
+ co
nfs_noffset,
+ FIT_FPGA_PROP, i);
+ uname = fit_get_name(buffer_p,images_noffset,
NULL);drivers/fpga/socfpga_arria10.c +5
-0+if (uname) { +debug ("FPGA: %s\n" , uname); + + if (strstr(uname, "fpga-periph") && + (!is_fpgamgr_early_user_mode()||
drivers/fpga/socfpga_arria10.c +3
-0+ is_fpgamgr_user_mode())) { + fpga_node_name = uname; + printf("FPGA: Start to program");
+ printf("peripheral/full
bitstream
...\n");drivers/fpga/socfpga_arria10.c +2
-0+break ; + } else if (strstr(uname, "fpga-core")&&
+ (is_fpgamgr_early_user_
mode()&&
+ !is_fpgamgr_user_mode()
))
{drivers/fpga/socfpga_arria10.c +2
-0+ fpga_node_name = uname; + printf("FPGA: Start to programcore ");
drivers/fpga/socfpga_arria10.c +9
-0+printf ("bitstream ...\n" ); +break ; + } + } +WATCHDOG_RESET (); + } + +if (!fpga_node_name) { + debug("FPGA: No suitable bitstream was found,count: %d.\n", i);
drivers/fpga/socfpga_arria10.c +4
-0+return 1 ; + } + + images_noffset = fit_image_get_node(buffer_p,
fpga_node_name);drivers/fpga/socfpga_arria10.c +7
-0+if (images_noffset <0 ) { +debug ("FPGA: No node '%s' was found in FIT.\n" , + fpga_node_name); +return -ENOENT ; + } + + if (!fit_image_get_data_position(buffer_p,
images_noffset,drivers/fpga/socfpga_arria10.c +3
-0+ &rbf_offset)) { +debug ("FPGA: Data position was found.\n" ); + } else if (!fit_image_get_data_offset(buffer_p,
images_noffset,drivers/fpga/socfpga_arria10.c +5
-0+ &rbf_offset)) { +/* +* For FIT with external data, figure out where +* the external images start. This is the base +* for the data-offset properties in each image.
drivers/fpga/socfpga_arria10.c +2
-0+*/ + rbf_offset += ((fdt_totalsize(buffer_p) + 3) &~3);
drivers/fpga/socfpga_arria10.c +3
-0+debug ("FPGA: Data offset was found.\n" ); + }else { + debug("FPGA: No data position/offset wasfound.\n");
drivers/fpga/socfpga_arria10.c +4
-0+return -ENOENT ; + } + + ret = fit_image_get_data_size(buffer_p, images_noffset,
&rbf_size);drivers/fpga/socfpga_arria10.c +2
-0+if (ret <0 ) { + debug("FPGA: No data size was found(err=%d).\n",
ret);drivers/fpga/socfpga_arria10.c +5
-0+return -ENOENT ; + } + +if (gd->ram_size < rbf_size) { + debug("FPGA: Using default OCRAM buffer andsize.\n");
drivers/fpga/socfpga_arria10.c +2
-0+ }else { + ret = fit_image_get_load(buffer_p,
images_noffset,drivers/fpga/socfpga_arria10.c +3
-0+ (ulong *)loadable); +if (ret <0 ) { + buffer_p = (u32*)DEFAULT_DDR_LOAD_ADDRESS;
+ debug("FPGA: No loadable was
found.\n");
+ debug("FPGA: Using default DDR load
address: 0x%x .\n",drivers/fpga/socfpga_arria10.c +4
-0+ DEFAULT_DDR_LOAD_ADDRESS); + }else { + buffer_p = (u32 *)*loadable; + debug("FPGA: Found loadable address =0x%x.\n",
drivers/fpga/socfpga_arria10.c +7
-0+ *loadable); + } + + buffer_size = rbf_size; + } + + debug("FPGA: External data: offset = 0x%x, size =0x%x.\n",
drivers/fpga/socfpga_arria10.c +6
-0+ rbf_offset, rbf_size); + + fpga_loadfs->remaining = rbf_size; + +/* +* Determine buffer size vs bitstream size, and calculating number of
+ * chunk by chunk transfer is required due to smaller
buffer sizedrivers/fpga/socfpga_arria10.c +14
-0+* compare to bitstream +*/ +if (rbf_size <= buffer_size) { +/* Loading whole bitstream into buffer */ + buffer_size = rbf_size; + fpga_loadfs->remaining =0 ; + }else { + fpga_loadfs->remaining -= buffer_size; + } + + fpga_loadfs->offset = rbf_offset; +/* Loading bitstream into buffer */ + ret = request_firmware_into_buf(dev, + fpga_loadfs-Quoted 4 lines
fpga_fsinfo-
filename,
drivers/fpga/socfpga_arria10.c +4
-0+ buffer_p, buffer_size, + fpga_loadfs->offset); +if (ret <0 ) { + debug("FPGA: Failed to read bitstream fromflash.\n");
drivers/fpga/socfpga_arria10.c +5
-0+return -ENOENT ; + } + +/* Getting info about bitstream types */ + get_rbf_image_info(&fpga_loadfs->rbfinfo, (u16*)buffer_p);
drivers/fpga/socfpga_arria10.c +8
-0+ +/* Update next reading bitstream offset */ + fpga_loadfs->offset += buffer_size; + +/* Update the final addr for bitstream */ + *buffer = (u32 )buffer_p; + +/* Update the size of bitstream to be programmed into FPGA
*/drivers/fpga/socfpga_arria10.c +6
-0+ *buffer_bsize = buffer_size; + +return 0 ; +} + +static int subsequent_loading_rbf_to_buffer(struct udevice*dev,
+ structfpga_loadfs_info*fpga_loadfs,
+ u32 *buffer,size_t*buffer_bsize)drivers/fpga/socfpga_arria10.c +14
-0+{ +int ret =0 ; +u32 *buffer_p = (u32 *)*buffer; + +/* Read the bitstream chunk by chunk. */ +if (fpga_loadfs->remaining > *buffer_bsize) { + fpga_loadfs->remaining -= *buffer_bsize; + }else { + *buffer_bsize = fpga_loadfs->remaining; + fpga_loadfs->remaining =0 ; + } + + ret = request_firmware_into_buf(dev, + fpga_loadfs-Quoted 4 lines
fpga_fsinfo-
filename,
+
buffer_p,*buffer_bsize,drivers/fpga/socfpga_arria10.c +3
-0+ fpga_loadfs->offset); +if (ret <0 ) { + debug("FPGA: Failed to read bitstream fromflash.\n");
drivers/fpga/socfpga_arria10.c +10
-0+return -ENOENT ; + } + +/* Update next reading bitstream offset */ + fpga_loadfs->offset += *buffer_bsize; + +return 0 ; +} + +int socfpga_loadfs(fpga_fs_info *fpga_fsinfo, const void*buf,
size_tbsize,drivers/fpga/socfpga_arria10.c +17
-0+ u32 offset) +{ +struct fpga_loadfs_info fpga_loadfs; +struct udevice *dev; +int status, ret, size; +u32 buffer = (uintptr_t )buf; +size_t buffer_sizebytes = bsize; +size_t buffer_sizebytes_ori = bsize; +size_t total_sizeof_image =0 ; +ofnode node; +const fdt32_t *phandle_p; +u32 phandle; + + node =get_fpga_mgr_ofnode (ofnode_null ()); + +if (ofnode_valid (node)) { + phandle_p = ofnode_get_property(node,"firmware-
loader", &size);drivers/fpga/socfpga_arria10.c +4
-0+if (!phandle_p) { + node =ofnode_path ("/chosen" ); +if (!ofnode_valid (node)) { + debug("FPGA: /chosen node wasnot
found.\n");drivers/fpga/socfpga_arria10.c +4
-0+return -ENOENT ; + } + + phandle_p = ofnode_get_property(node,"firmware-loader",
drivers/fpga/socfpga_arria10.c +3
-0+ &size); +if (!phandle_p) { + debug("FPGA: firmware-loaderproperty was not");
drivers/fpga/socfpga_arria10.c +6
-0+debug (" found.\n" ); +return -ENOENT ; + } + } + }else { + debug("FPGA: FPGA manager node was notfound.\n");
drivers/fpga/socfpga_arria10.c +5
-0+return -ENOENT ; + } + + phandle =fdt32_to_cpu (*phandle_p); + ret =uclass_get_device_by_phandle_id(UCLASS_FS_FIRMWARE_LOADER,
drivers/fpga/socfpga_arria10.c +10
-0+ phandle, &dev); +if (ret) +return ret; + +memset (&fpga_loadfs,0 ,sizeof (fpga_loadfs)); + + fpga_loadfs.fpga_fsinfo = fpga_fsinfo; + fpga_loadfs.offset = offset; + + printf("FPGA: Checking FPGA configuration setting...\n");
drivers/fpga/socfpga_arria10.c +3
-0+ +/* +* Note: Both buffer and buffer_sizebytes values can be altered by
drivers/fpga/socfpga_arria10.c +3
-0+* function below. +*/ + ret = first_loading_rbf_to_buffer(dev, &fpga_loadfs,&buffer,
drivers/fpga/socfpga_arria10.c +10
-0+ &buffer_sizebytes); +if (ret ==1 ) { +printf ("FPGA: Skipping configuration ...\n" ); +return 0 ; + }else if (ret) { +return ret; + } + + if (fpga_loadfs.rbfinfo.section == core_section && + !(is_fpgamgr_early_user_mode() &&!is_fpgamgr_user_mode())) {
+ debug("FPGA : Must be in Early Release mode to
program ");drivers/fpga/socfpga_arria10.c +5
-0+debug ("core bitstream.\n" ); +return -EPERM ; + } + +/* Disable all signals from HPS peripheral controller to
FPGA */drivers/fpga/socfpga_arria10.c +3
-0+writel (0 , &system_manager_base->fpgaintf_en_global); + +/* Disable all axi bridges (hps2fpga, lwhps2fpga & fpga2hps) */
drivers/fpga/socfpga_arria10.c +5
-0+socfpga_bridges_reset (); + +if (fpga_loadfs.rbfinfo.section == periph_section) { +/* Initialize the FPGA Manager */ + status = fpgamgr_program_init((u32 *)buffer,
buffer_sizebytes);drivers/fpga/socfpga_arria10.c +2
-0+if (status) { + debug("FPGA: Init with peripheralbitstream failed.\n");
drivers/fpga/socfpga_arria10.c +6
-0+return -EPERM ; + } + } + +/* Transfer bitstream to FPGA Manager */ + fpgamgr_program_write((void *)buffer,
buffer_sizebytes);drivers/fpga/socfpga_arria10.c +6
-0+ + total_sizeof_image += buffer_sizebytes; + +while (fpga_loadfs.remaining) { + ret =subsequent_loading_rbf_to_buffer (dev, + &fpga_load
fs,
+ &buffer
,
+ &buffer_sizebytes_ori);drivers/fpga/socfpga_arria10.c +15
-1+ +if (ret) +return ret; + +/* Transfer data to FPGA Manager */ +fpgamgr_program_write ((void *)buffer, + buffer_sizebytes_ori); + + total_sizeof_image += buffer_sizebytes_ori; + +WATCHDOG_RESET (); + } + +if (fpga_loadfs.rbfinfo.section == periph_section) { + if (fpgamgr_wait_early_user_mode() != -ETIMEDOUT){
drivers/fpga/socfpga_arria10.c +2
-0+config_pins (gd->fdt_blob,"shared" ); + puts("FPGA: Early ReleaseSucceeded.\n");
drivers/fpga/socfpga_arria10.c +2
-0+ }else { + debug("FPGA: Failed to see EarlyRelease.\n");
drivers/fpga/socfpga_arria10.c +6
-0+return -EIO ; + } + +/* For monolithic bitstream */ +if (is_fpgamgr_user_mode ()) { +/* Ensure the FPGA entering config done */
drivers/fpga/socfpga_arria10.c +8
-0+ status =fpgamgr_program_finish (); +if (status) +return status; + +config_pins (gd->fdt_blob,"fpga" ); +puts ("FPGA: Enter user mode.\n" ); + } + }else if (fpga_loadfs.rbfinfo.section == core_section){
drivers/fpga/socfpga_arria10.c +9
-0+/* Ensure the FPGA entering config done */ + status =fpgamgr_program_finish (); +if (status) +return status; + +config_pins (gd->fdt_blob,"fpga" ); +puts ("FPGA: Enter user mode.\n" ); + }else { + debug("FPGA: Config Error: Unsupportedbitstream
type.\n");drivers/fpga/socfpga_arria10.c +7
-0+return -ENOEXEC ; + } + +return (int )total_sizeof_image; +} + +void fpgamgr_program(const void *buf, size_t bsize, u32offset)
drivers/fpga/socfpga_arria10.c +7
-0+{ +fpga_fs_info fpga_fsinfo; + + fpga_fsinfo.filename =get_fpga_filename (); + +if (fpga_fsinfo.filename) + socfpga_loadfs(&fpga_fsinfo, buf, bsize,offset);
drivers/fpga/socfpga_arria10.c +4
-0+} +#endif + +/* This function is used to load the core bitstream from the
OCRAM. */
int socfpga_load(Altera_desc *desc, const void*rbf_data,size_trbf_size)
{drivers/fpga/socfpga_arria10.c +4
-1-int status; +unsigned long status; +struct rbf_info rbfinfo; + +memset (&rbfinfo,0 ,sizeof (rbfinfo));/* Disable all signals from hps peripheral controller to
fpga */writel(0, &system_manager_base->fpgaintf_en_global);drivers/fpga/socfpga_arria10.c +0
-0@@ -462,13 +915,31 @@ int socfpga_load(Altera_desc *desc,const
void*rbf_data,size_trbf_size)/* Disable all axi bridge (hps2fpga, lwhps2fpga & fpga2hps) */ socfpga_bridges_reset();drivers/fpga/socfpga_arria10.c +0
-2-/* Initialize the FPGA Manager */ - status = fpgamgr_program_init((u32 *)rbf_data,
rbf_size);drivers/fpga/socfpga_arria10.c +6
-2-if (status) -return status; +/* Getting info about bitstream types */ +get_rbf_image_info (&rbfinfo, (u16 *)rbf_data); + +if (rbfinfo.section == periph_section) { +/* Initialize the FPGA Manager */ + status = fpgamgr_program_init((u32 *)rbf_data,
rbf_size);drivers/fpga/socfpga_arria10.c +5
-1+if (status) +return status; + } -/* Write the RBF data to FPGA Manager */ + if (rbfinfo.section == core_section && + !(is_fpgamgr_early_user_mode() &&!is_fpgamgr_user_mode())) {
+ debug("FPGA : Must be in early release mode to
program ");drivers/fpga/socfpga_arria10.c +12
-1+debug ("core bitstream.\n" ); +return -EPERM ; + } + +/* Write the bitstream to FPGA Manager */ fpgamgr_program_write (rbf_data, rbf_size); -return fpgamgr_program_finish (); + status =fpgamgr_program_finish (); +if (status) { +config_pins (gd->fdt_blob,"fpga" ); +puts ("FPGA: Enter user mode.\n" ); + } + +return status; }include/image.h +1
-0@@ -1046,6 +1046,10 @@ int fit_check_format(const void *fit);int fit_conf_find_compat (const void *fit,const void *fdt);int fit_conf_get_node (const void *fit,const char *conf_uname); +int fit_conf_get_prop_node_count(const void *fit, intnoffset,
include/image.h +2
-0+ const char *prop_name); +int fit_conf_get_prop_node_index(const void *fit, intnoffset,
+ const char*prop_name, int index);/**
*fit_conf_get_prop_node()- Get node refered to by a
configuration
PATCH v12 6/9 ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK
In reply to tien.fong.chee at intel.comFrom: Tien Fong Chee <[email protected]>
Update the default configuration file to enable the necessary functionality to get the SoCFPGA loadfs driver support. This would enable the implementation of programming bitstream into FPGA from MMC.
---
changes for v12
- No changes.
changes for v11
- No changes.
changes for v10
- No changes.
changes for v9
- No changes.
changes for v8
- Added FIT related configs
changes for v7
- Removed limit set for CONFIG_FS_FAT_MAX_CLUSTSIZE
--- configs/socfpga_arria10_defconfig | 9 +++++++++ 1 file changed, 9 insertions(+)
configs/socfpga_arria10_defconfig +9 -0
@@ -28,9 +28,18 @@ CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0" # CONFIG_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria10_socdk_sdmmc" CONFIG_ENV_IS_IN_MMC=y +CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_DM_MMC=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_EXT_SUPPORT=y +CONFIG_SPL_FS_FAT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_FS_LOADER=y CONFIG_FPGA_SOCFPGA=y +CONFIG_SPL_FIT=y +CONFIG_FIT=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_MMC=y
Signature · 1 line
2.13.0
PATCH v12 7/9 spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
In reply to tien.fong.chee at intel.comFrom: Tien Fong Chee <[email protected]>
Add support for loading FPGA bitstream to get DDR up running before U-Boot is loaded into DDR. Boot device initialization, generic firmware loader and SPL FAT support are required for this whole mechanism to work.
---
changes for v12
- No changes.
changes for v11
- No changes.
changes for v10
- Removed the static so the function can be referred by other c file.
changes for v9
- Used ALLOC_CACHE_ALIGN_BUFFER
- De-duplicated the same chunks of codes
changes for v8
- No changes.
changes for v7
- Removed casting for get_fpga_filename
- Removed hard coding DDR address for loading core bistream, using loadable property from FIT.
- Added checking for config_pins, return if error.
--- .../include/mach/fpga_manager_arria10.h | 1 + arch/arm/mach-socfpga/spl_a10.c | 31 +++++++++++++++++++++- drivers/fpga/socfpga_arria10.c | 2 +- 3 files changed, 32 insertions(+), 2 deletions(-)
arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +1 -0
@@ -126,6 +126,7 @@ int fpgamgr_program_finish(void);int is_fpgamgr_user_mode (void );int fpgamgr_wait_early_user_mode (void );const char *get_fpga_filename (void ); +int is_fpgamgr_early_user_mode (void );int socfpga_loadfs (fpga_fs_info *fpga_fsinfo,const void *buf,size_t bsize,u32 offset);void fpgamgr_program (const void *buf,size_t bsize,u32 offset);
arch/arm/mach-socfpga/spl_a10.c +30 -1
@@ -1,6 +1,6 @@// SPDX-License-Identifier: GPL-2.0+ /* -* Copyright (C) 2012 Altera Corporation <www.altera.com> +* Copyright (C) 2012-2019 Altera Corporation <www.altera.com> */ #include <common.h>
@@ -23,6 +23,11 @@#include <fdtdec.h> #include <watchdog.h> #include <asm/arch/pinmux.h> +#include <asm/arch/fpga_manager.h> +#include <mmc.h> +#include <memalign.h> + +#define FPGA_BUFSIZ 16 * 1024DECLARE_GLOBAL_DATA_PTR ;
@@ -68,11 +73,35 @@ u32 spl_boot_mode(const u32 boot_device)void spl_board_init (void ) { +ALLOC_CACHE_ALIGN_BUFFER (char, buf,FPGA_BUFSIZ ); +/* enable console uart printing */ preloader_console_init ();WATCHDOG_RESET ();arch_early_init_r (); + +/* If the full FPGA is already loaded, ie.from EPCQ, config fpga pins */ +if (is_fpgamgr_user_mode ()) { +int ret =config_pins (gd->fdt_blob,"shared" ); + +if (ret) +return ; + + ret =config_pins (gd->fdt_blob,"fpga" ); +if (ret) +return ; + }else if (!is_fpgamgr_early_user_mode ()) { +/* Program IOSSM(early IO release) or full FPGA */ +fpgamgr_program (buf,FPGA_BUFSIZ ,0 ); + } + +/* If the IOSSM/full FPGA is already loaded, start DDR */ +if (is_fpgamgr_early_user_mode () ||is_fpgamgr_user_mode ()) +ddr_calibration_sequence (); + +if (!is_fpgamgr_user_mode ()) +fpgamgr_program (buf,FPGA_BUFSIZ ,0 ); }void board_init_f (ulong dummy)
drivers/fpga/socfpga_arria10.c +1 -1
@@ -69,7 +69,7 @@ static int wait_for_user_mode(void) 1, FPGA_TIMEOUT_MSEC, false); } -static int is_fpgamgr_early_user_mode (void ) +int is_fpgamgr_early_user_mode (void ) {return (readl (&fpga_manager_base->imgcfg_stat) &ALT_FPGAMGR_IMGCFG_STAT_F2S_EARLY_USERMODE_SET_MSK ) !=0 ;
Signature · 1 line
2.13.0
PATCH v12 8/9 ARM: socfpga: Synchronize the configuration for A10 SoCDK
In reply to tien.fong.chee at intel.comFrom: Tien Fong Chee <[email protected]>
Update the default configuration file to enable the necessary functionality the get the kit working.
---
changes for v12
- No changes.
changes for v11
- No changes.
changes for v10
- No changes.
changes for v9
- No changes.
changes for v8
- Moved the FIT related configs to the patch of configuration for FPGA SoCFPGA A10 SoCDK.
changes for v7
- Keep minimal configs.
--- configs/socfpga_arria10_defconfig | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-)
configs/socfpga_arria10_defconfig +9 -6
@@ -10,11 +10,14 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200" # CONFIG_USE_BOOTCOMMAND is not set +CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y +CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y CONFIG_DEFAULT_FDT_FILE="socfpga_arria10_socdk_sdmmc.dtb" +CONFIG_VERSION_VARIABLE=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOUNCE_BUFFER=y CONFIG_SPL_FPGA_SUPPORT=y -CONFIG_SPL_SPI_LOAD=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y # CONFIG_CMD_FLASH is not set
@@ -23,9 +26,7 @@ CONFIG_CMD_MMC=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0" -# CONFIG_SPL_DOS_PARTITION is not set -# CONFIG_ISO_PARTITION is not set -# CONFIG_EFI_PARTITION is not set +CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names" CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria10_socdk_sdmmc" CONFIG_ENV_IS_IN_MMC=y CONFIG_SPL_ENV_SUPPORT=y
@@ -33,7 +34,6 @@ CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPL_DM_MMC=y CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_EXT_SUPPORT=y CONFIG_SPL_FS_FAT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_FS_LOADER=y
@@ -44,11 +44,14 @@ CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_MMC=y CONFIG_MTD_DEVICE=y +CONFIG_MMC_DW=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y CONFIG_MII=y +CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_TIMER=y CONFIG_SPL_TIMER=y CONFIG_DESIGNWARE_APB_TIMER=y -CONFIG_USE_TINY_PRINTF=y
Signature · 1 line
2.13.0
PATCH v12 9/9 ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL
In reply to tien.fong.chee at intel.comFrom: Tien Fong Chee <[email protected]>
Increasing Malloc pool size up to 0x15000 is required to support FAT in SPL . The result of calculation is come from after applying some few patches which are required for optimizing vfat and maximizing resusable of the memory pool, and then followed by the size required come from default max cluster(0x10000) + others(0x2000) + additional memory for headroom(0x3000). Previous records of describing these few patches can be checked from here [v7]: https://www.mail-archive.com/u-boot at lists.denx.de/msg314511.html .
---
changes for v12
- Improved the commit messages.
changes for v11
- No changes.
changes for v10
- No changes.
changes for v9
- No changes.
changes for v8
- Moved the FIT related configs to the patch of configuration for FPGA SoCFPGA A10 SoCDK.
changes for v7
- Keep minimal configs.
--- include/configs/socfpga_common.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
include/configs/socfpga_common.h +2 -2
@@ -1,6 +1,6 @@/* SPDX-License-Identifier: GPL-2.0+ */ /* -* Copyright (C) 2012 Altera Corporation <www.altera.com> +* Copyright (C) 2012-2019 Altera Corporation <www.altera.com> */ #ifndef __CONFIG_SOCFPGA_COMMON_H__#define __CONFIG_SOCFPGA_COMMON_H__
@@ -254,7 +254,7 @@ unsigned int cm_get_qspi_controller_clk_hz(void);#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10 )/* SPL memory allocation configuration, this is for FAT implementation */ #ifndef CONFIG_SYS_SPL_MALLOC_START -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00015000#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_INIT_RAM_SIZE - \ CONFIG_SYS_SPL_MALLOC_SIZE + \ CONFIG_SYS_INIT_RAM_ADDR)
Signature · 1 line
2.13.0
PATCH v12 9/9 ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL
Quoted 4 lines · tien.fong.chee at intel.com
From: Tien Fong Chee <[email protected]>
Increasing Malloc pool size up to
0x15000is required to support FAT in SPL . The result of calculation is come from after applying some few patches
"Some few patches"? What should that mean? Either you refer to the current state or you can refer to the patchwork items.
Quoted 5 lines
which are required for optimizing vfat and maximizing resusable of the memory pool, and then followed by the size required come from default max cluster(0x10000) + others(0x2000) + additional memory for headroom(0x3000). Previous records of describing these few patches can be checked from here [v7]: https://www.mail-archive.com/u-boot at lists.denx.de/msg314511.html .
Why do you refer to mail-archive.com instead of patchwork?
Regards,
Simon
Quoted 49 lines
Signed-off-by Tien Fong Chee <[email protected]>---
changes for v12
- Improved the commit messages.changes for v11
- No changes.changes for v10
- No changes.changes for v9
- No changes.changes for v8
- Moved the FIT related configs to the patch of configuration for FPGA SoCFPGA A10 SoCDK.changes for v7
- Keep minimal configs.--- include/configs/socfpga_common.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)include/configs/socfpga_common.h +2
-2@@ -1,6 +1,6 @@/* SPDX-License-Identifier: GPL-2.0+ */ /* -* Copyright (C) 2012 Altera Corporation <www.altera.com> +* Copyright (C) 2012-2019 Altera Corporation <www.altera.com> */ #ifndef __CONFIG_SOCFPGA_COMMON_H__#define __CONFIG_SOCFPGA_COMMON_H__@@ -254,7 +254,7 @@ unsigned int cm_get_qspi_controller_clk_hz(void);#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10 )/* SPL memory allocation configuration, this is for FAT implementation */ #ifndef CONFIG_SYS_SPL_MALLOC_START -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00015000#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_INIT_RAM_SIZE - \ CONFIG_SYS_SPL_MALLOC_SIZE + \ CONFIG_SYS_INIT_RAM_ADDR)
Chee
PATCH v12 9/9 ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL
Quoted 23 lines · Simon Goldschmidt
Quoted 7 lines · tien.fong.chee at intel.com
From: Tien Fong Chee <[email protected]>
Increasing Malloc pool size up to
0x15000is required to support FAT in SPL
. The result of calculation is come from after applying some few patches"Some few patches"? What should that mean? Either you refer to the current state or you can refer to the patchwork items.
Quoted 11 lines
which are required for optimizing vfat and maximizing resusable of the
memory pool, and then followed by the size required come from default max
cluster(0x10000) + others(0x2000) + additional memory for headroom(0x3000).
Previous records of describing these few patches can be checked from here
[v7]: https://www.mail-archive.com/u-boot atlists.denx.de/msg314511.html .
Quoted 1 line
Why do you refer to mail-archive.com instead of patchwork?
Contains the cover letter in case reviewer need to know more information.
Thanks.
Quoted 58 lines
Quoted 58 lines
Signed-off-by Tien Fong Chee <[email protected]>---
changes for v12
- Improved the commit messages.changes for v11
- No changes.changes for v10
- No changes.changes for v9
- No changes.changes for v8
- Moved the FIT related configs to the patch of configuration for FPGA
SoCFPGA A10 SoCDK.changes for v7
- Keep minimal configs.
---
include/configs/socfpga_common.h| 4 ++--1 file changed, 2 insertions(+), 2 deletions(-)include/configs/socfpga_common.h +1
-1@@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * Copyright (C) 2012 Altera Corporation <www.altera.com> + * Copyright (C) 2012-2019 Altera Corporation <www.altera.com> */ #ifndef __CONFIG_SOCFPGA_COMMON_H__ #define __CONFIG_SOCFPGA_COMMON_H__@@ -254,7 +254,7 @@ unsigned intcm_get_qspi_controller_clk_hz (void); #if defined(CONFIG_TARGET_SOCFPGA_ARRIA10) /* SPL memory allocation configuration, this is for FATimplementation */
#ifndefCONFIG_SYS_SPL_MALLOC_STARTinclude/configs/socfpga_common.h +1
-1-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00015000#define
CONFIG_SYS_SPL_MALLOC_START(CONFIG_SYS_INIT_RAM_S
IZE - \
CONFIG_SYS_SPL_MALLOC_SI ZE + \
CONFIG_SYS_INIT_RAM_ADDR )
PATCH v12 9/9 ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL
Quoted 25 lines · Tien Fong
Quoted 23 lines · Simon Goldschmidt
Quoted 7 lines · tien.fong.chee at intel.com
From: Tien Fong Chee <[email protected]>
Increasing Malloc pool size up to
0x15000is required to support FAT in SPL
. The result of calculation is come from after applying some few patches"Some few patches"? What should that mean? Either you refer to the current state or you can refer to the patchwork items.
Quoted 11 lines
which are required for optimizing vfat and maximizing resusable of the
memory pool, and then followed by the size required come from default max
cluster(0x10000) + others(0x2000) + additional memory for headroom(0x3000).
Previous records of describing these few patches can be checked from here
[v7]: https://www.mail-archive.com/u-boot atlists.denx.de/msg314511.html .
Quoted 3 lines
Quoted 1 line
Why do you refer to mail-archive.com instead of patchwork?
Contains the cover letter in case reviewer need to know more information.
I think you understood that wrong. Why do you reference a 3rd party host (mail-archive.com) instead of the official list archive or patchwork?
And please note patchwork keeps the cover letter as well.
Also note, this is the commit message which will got into the git lot. Referencing v7 and older history seems misplaced here. Better move it below the '---'.
Regards,
Simon
Quoted 60 lines
Thanks.
Quoted 58 lines
Quoted 58 lines
Signed-off-by Tien Fong Chee <[email protected]>---
changes for v12
- Improved the commit messages.changes for v11
- No changes.changes for v10
- No changes.changes for v9
- No changes.changes for v8
- Moved the FIT related configs to the patch of configuration for FPGA
SoCFPGA A10 SoCDK.changes for v7
- Keep minimal configs.--- include/configs/socfpga_common.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)include/configs/socfpga_common.h +1
-1@@ -1,6 +1,6 @@/* SPDX-License-Identifier: GPL-2.0+ */ /* -* Copyright (C) 2012 Altera Corporation <www.altera.com> +* Copyright (C) 2012-2019 Altera Corporation <www.altera.com> */ #ifndef __CONFIG_SOCFPGA_COMMON_H__#define __CONFIG_SOCFPGA_COMMON_H__@@ -254,7 +254,7 @@ unsigned intcm_get_qspi_controller_clk_hz (void);#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10 )/* SPL memory allocation configuration, this is for FAT implementation */
#ifndefCONFIG_SYS_SPL_MALLOC_STARTinclude/configs/socfpga_common.h +1
-1-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00015000#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_INIT_RAM_SIZE - \
CONFIG_SYS_SPL_MALLOC_SI
ZE + \
CONFIG_SYS_INIT_RAM_ADDR
)
Chee
PATCH v12 9/9 ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL
Quoted 36 lines · Simon Goldschmidt
Quoted 34 lines · Tien Fong
Quoted 31 lines · Simon Goldschmidt
Quoted 10 lines · tien.fong.chee at intel.com
From: Tien Fong Chee <[email protected]>
Increasing Malloc pool size up to
0x15000is required to support
FAT in SPL
. The result of calculation is come from after applying some few
patches"Some few patches"? What should that mean? Either you refer to the
current state or you can refer to the patchwork items.Quoted 14 lines
which are required for optimizing vfat and maximizing resusable of
the
memory pool, and then followed by the size required come from default max
cluster(0x10000) + others(0x2000) + additional memory for headroom(0x3000).
Previous records of describing these few patches can be checked from here
[v7]: https://www.mail-archive.com/u-boot at lists.denx.de/msg3145 11.h
tml .
Quoted 8 lines
Quoted 3 lines
Quoted 1 line
Why do you refer to mail-archive.com instead of patchwork?
Contains the cover letter in case reviewer need to know more information.
I think you understood that wrong. Why do you reference a 3rd party host (mail-archive.com) instead of the official list archive or patchwork?
And please note patchwork keeps the cover letter as well.
Okay, i can't find any cover letter from this link https://patchwork.oz
labs.org/project/uboot/list/?series=&submitter=70549&state=*&q=&archive =both&delegate= . Do you know how to find it?
Quoted 5 lines
Also note, this is the commit message which will got into the git lot.
Referencing v7 and older history seems misplaced here. Better move it below the '---'.
Okay, noted. So, what should i do with this patch now? Should i send next version with new commit message?
Thanks.
TF
Quoted 66 lines
Quoted 66 lines
Thanks.
Quoted 62 lines
Quoted 62 lines
Signed-off-by Tien Fong Chee <[email protected]>---
changes for v12
- Improved the commit messages.changes for v11
- No changes.changes for v10
- No changes.changes for v9
- No changes.changes for v8
- Moved the FIT related configs to the patch of configuration for
FPGA
SoCFPGA A10 SoCDK.changes for v7
- Keep minimal configs.
---
include/configs/socfpga_common.h| 4 ++--1 file changed, 2 insertions(+), 2 deletions(-)include/configs/socfpga_common.h +1
-1@@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * Copyright (C) 2012 Altera Corporation <www.altera.com> + * Copyright (C) 2012-2019 Altera Corporation <www.altera.com> */ #ifndef __CONFIG_SOCFPGA_COMMON_H__ #define __CONFIG_SOCFPGA_COMMON_H__@@ -254,7 +254,7 @@ unsigned intcm_get_qspi_controller_clk_hz (void); #if defined(CONFIG_TARGET_SOCFPGA_ARRIA10) /* SPL memory allocation configuration, this is for FATimplementation */
#ifndefCONFIG_SYS_SPL_MALLOC_STARTinclude/configs/socfpga_common.h +1
-1-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00015000#define
CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_INIT_RAM_S IZE - \
CONFIG_SYS_SPL_MALLOC_SI ZE + \
CONFIG_SYS_INIT_RAM_ADDR )
PATCH v12 9/9 ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL
Quoted 45 lines · Tien Fong
Quoted 43 lines · Simon Goldschmidt
Quoted 34 lines · Tien Fong
Quoted 31 lines · Simon Goldschmidt
Quoted 10 lines · tien.fong.chee at intel.com
From: Tien Fong Chee <[email protected]>
Increasing Malloc pool size up to
0x15000is required to support
FAT in SPL
. The result of calculation is come from after applying some few
patches"Some few patches"? What should that mean? Either you refer to the
current state or you can refer to the patchwork items.Quoted 14 lines
which are required for optimizing vfat and maximizing resusable of
the
memory pool, and then followed by the size required come from default max
cluster(0x10000) + others(0x2000) + additional memory for headroom(0x3000).
Previous records of describing these few patches can be checked from here
[v7]: https://www.mail-archive.com/u-boot at lists.denx.de/msg3145 11.h
tml .Quoted 3 lines
Quoted 1 line
Why do you refer to mail-archive.com instead of patchwork?
Contains the cover letter in case reviewer need to know more information.
I think you understood that wrong. Why do you reference a 3rd party host (mail-archive.com) instead of the official list archive or patchwork?
Quoted 5 lines
Quoted 1 line
And please note patchwork keeps the cover letter as well.
Okay, i can't find any cover letter from this link https://patchwork.oz
labs.org/project/uboot/list/?series=&submitter=70549&state=*&q=&archive =both&delegate= . Do you know how to find it?
- Go to one of the patches of v7, e.g.:
https://patchwork.ozlabs.org/patch/1034279/
- click "Related"
- click the 0/7 link and you'll get the cover letter:
https://patchwork.ozlabs.org/cover/1034282/
Quoted 9 lines
Quoted 6 lines
Also note, this is the commit message which will got into the git lot.
Referencing v7 and older history seems misplaced here. Better move it below the '---'.Okay, noted. So, what should i do with this patch now? Should i send next version with new commit message?
Well, I don't really care about which host you reference, but yes, please send a version that doesn't contain such a reference in the commit log.
Other than that, the series is, well, good enough for me to be accepted, I guess.
Regards,
Simon
Quoted 70 lines
Thanks.
TFQuoted 66 lines
Quoted 66 lines
Thanks.
Quoted 62 lines
Quoted 62 lines
Signed-off-by Tien Fong Chee <[email protected]>---
changes for v12
- Improved the commit messages.changes for v11
- No changes.changes for v10
- No changes.changes for v9
- No changes.changes for v8
- Moved the FIT related configs to the patch of configuration for
FPGA
SoCFPGA A10 SoCDK.changes for v7
- Keep minimal configs.--- include/configs/socfpga_common.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)include/configs/socfpga_common.h +1
-1@@ -1,6 +1,6 @@/* SPDX-License-Identifier: GPL-2.0+ */ /* -* Copyright (C) 2012 Altera Corporation <www.altera.com> +* Copyright (C) 2012-2019 Altera Corporation <www.altera.com> */ #ifndef __CONFIG_SOCFPGA_COMMON_H__#define __CONFIG_SOCFPGA_COMMON_H__@@ -254,7 +254,7 @@ unsigned intcm_get_qspi_controller_clk_hz (void);#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10 )/* SPL memory allocation configuration, this is for FAT implementation */
#ifndefCONFIG_SYS_SPL_MALLOC_STARTinclude/configs/socfpga_common.h +1
-1-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00015000 #define
CONFIG_SYS_SPL_MALLOC_START(CONFIG_SYS_INIT_RAM_S
IZE - \
CONFIG_SYS_SPL_MALLOC_SI
ZE + \
CONFIG_SYS_INIT_RAM_ADDR
)
Chee
PATCH v12 9/9 ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL
Quoted 88 lines · Simon Goldschmidt
Quoted 58 lines · Tien Fong
Quoted 55 lines · Simon Goldschmidt
Quoted 44 lines · Tien Fong
Quoted 40 lines · Simon Goldschmidt
Quoted 5 lines · tien.fong.chee at intel.com
From: Tien Fong Chee <[email protected]>
Quoted 7 lines
Increasing Malloc pool size up to
0x15000is required to support
FAT in SPL
. The result of calculation is come from after applying some
few
patches"Some few patches"? What should that mean? Either you refer to
the
current state or you can refer to the patchwork items.Quoted 19 lines
which are required for optimizing vfat and maximizing resusable
of
the
memory pool, and then followed by the size required come from
default max
cluster(0x10000) + others(0x2000) + additional memory for headroom(0x3000).
Previous records of describing these few patches can be checked
from here
[v7]: https://www.mail-archive.com/u-boot at lists.denx.de/msg 3145
11.h
tml .Quoted 3 lines
Quoted 1 line
Why do you refer to mail-archive.com instead of patchwork?
Contains the cover letter in case reviewer need to know more information.
I think you understood that wrong. Why do you reference a 3rd party
host (mail-archive.com) instead of the official list archive or patchwork?Quoted 6 lines
Quoted 1 line
And please note patchwork keeps the cover letter as well.
Okay, i can't find any cover letter from this link https://patchwor
k.oz labs.org/project/uboot/list/?series=&submitter=70549&state=*&q=&arc hive
=both&delegate= . Do you know how to find it?- Go to one of the patches of v7, e.g.:
https://patchwork.ozlabs.org/patch/1034279/
- click "Related"
- click the 0/7 link and you'll get the cover letter:
https://patchwork.ozlabs.org/cover/1034282/Quoted 4 lines
Quoted 4 lines
Quoted 8 lines
Quoted 5 lines
Also note, this is the commit message which will got into the git lot.
Referencing v7 and older history seems misplaced here. Better move
it below the '---'.Okay, noted. So, what should i do with this patch now? Should i send
next version with new commit message?Well, I don't really care about which host you reference, but yes, please send a version that doesn't contain such a reference in the commit log.
Quoted 6 lines
Other than that, the series is, well, good enough for me to be accepted, I guess.
Regards,
Simon
Okay, i will send a next version.
Quoted 79 lines
Quoted 79 lines
Thanks.
TFQuoted 74 lines
Quoted 74 lines
Thanks.
Quoted 68 lines
Quoted 68 lines
Signed-off-by Tien Fong Chee <[email protected]>---
changes for v12
- Improved the commit messages.changes for v11
- No changes.changes for v10
- No changes.changes for v9
- No changes.changes for v8
- Moved the FIT related configs to the patch of
configuration
for
FPGA
SoCFPGA A10 SoCDK.changes for v7
- Keep minimal configs.
---
include/configs/socfpga_common.h| 4 ++--1 file changed, 2 insertions(+), 2 deletions(-)include/configs/socfpga_common.h +1
-1@@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* -* Copyright (C) 2012 Altera Corporation <www.altera.com> +* Copyright (C) 2012-2019 Altera Corporation <www.altera. com>
*/
#ifndef__CONFIG_SOCFPGA_COMMON_H__
#define__CONFIG_SOCFPGA_COMMON_H__include/configs/socfpga_common.h +0
-0@@ -254,7 +254,7 @@ unsigned intcm_get_qspi_controller_clk_hz (void); #if defined(CONFIG_TARGET_SOCFPGA_ARRIA10) /* SPL memory allocation configuration, this is for FATimplementation */
#ifndefCONFIG_SYS_SPL_MALLOC_STARTinclude/configs/socfpga_common.h +1
-1-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00015000#define
CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_INIT_RAM_S IZE - \
CONFIG_SYS_SPL_MALLOC_ SI
ZE + \
CONFIG_SYS_INIT_RAM_AD DR
)
Chee
v12 cover Add support for loading FPGA bitstream
In reply to tien.fong.chee at intel.comQuoted 57 lines · tien.fong.chee at intel.com
From: Tien Fong Chee <[email protected]>
This version mainly resolved comments from Dinh in [v11].
This series is working on top of u-boot.git http://git.denx.de/u-boot
.gitThese patches are required before applying this series of patches
1. [U-Boot,v4] misc:fs_loader: Add support for initializing block device
https://patchwork.ozlabs.org/project/uboot/list/?series=89282 (done review)2. [U-Boot] fpga: Replace char * with const char * for filename
https://patchwork.ozlabs.org/patch/1042665/ (done review)3. [U-Boot] misc:
fs_loader: Replace label with DT phandle
https://patchwork.ozlabs.org/patch/1051782/ (under review)[v11]: https://www.mail-archive.com/u-boot at lists.denx.de/msg318174.ht ml
[v10]: https://www.mail-archive.com/u-boot at lists.denx.de/msg318167.ht ml
[v9]: https://www.mail-archive.com/u-boot at lists.denx.de/msg316086.htm l
[v8]: https://www.mail-archive.com/u-boot at lists.denx.de/msg316086.htm l
[v7]: https://www.mail-archive.com/u-boot at lists.denx.de/msg314511.htm lTien Fong Chee (9):
ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
ARM: socfpga: Cleaning up and ensuring consistent format messages in
driver
ARM: socfpga: Moving the watchdog reset to the for-loop status polling
ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
ARM: socfpga: Synchronize the configuration for A10 SoCDK
ARM: socfpga: Increase Malloc pool size to support FAT filesystem in
SPLarch/arm/dts/socfpga_arria10_socdk_sdmmc.dts | 17 + .../include/mach/fpga_manager_arria10.h | 40 +- arch/arm/mach-socfpga/spl_a10.c | 31 +- board/altera/arria10-socdk/fit_spl_fpga.its | 38 ++ configs/socfpga_arria10_defconfig | 22 +- .../fpga/altera-socfpga-a10-fpga-mgr.txt | 26 +- drivers/fpga/socfpga_arria10.c | 514
++++++++++++++++++++-
include/configs/socfpga_common.h | 4 +- include/image.h | 4 +
Quoted 3 lines
9 files changed, 664 insertions(+), 32 deletions(-)create mode 100644 board/altera/arria10-socdk/fit_spl_fpga.its
Any comment about this series of patches?
Thanks.
Regards,
TF.