arm64: dts: imx8mq: Move the opp table out of bus node
Subsystems (2)
Fabio Estevam
reviewerPATCH 1/1 arm64: dts: imx8mq: Move the opp table out of bus node
Move opp-table node from soc node to root node.
opp-table node does not have any register properties and thus shouldn't be placed inside the bus.
This fixes the following build warnings with W=1:
arch/arm64/boot/dts/freescale/imx8mq.dtsi:687.28-703.5: Warning (simple_bus_reg): /soc@0/opp-table: missing or empty reg/ranges property
--- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 37 +++++++++++------------ 1 file changed, 18 insertions(+), 19 deletions(-)
arch/arm64/boot/dts/freescale/imx8mq.dtsi +18 -19
@@ -132,6 +132,24 @@ }; }; + a53_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <900000>; + clock-latency-ns = <150000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <150000>; + opp-suspend; + }; + }; + pmu { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
@@ -683,25 +701,6 @@ status = "disabled"; }; - - a53_opp_table: opp-table { - compatible = "operating-points-v2"; - opp-shared; - - opp-800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <900000>; - clock-latency-ns = <150000>; - }; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <1000000>; - clock-latency-ns = <150000>; - opp-suspend; - }; - }; - gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, /* GIC Dist */
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Shawn Guo
AppliedQuoted 11 lines · Fabio Estevam
Move opp-table node from soc node to root node.
opp-table node does not have any register properties and thus shouldn't be placed inside the bus.
This fixes the following build warnings with W=1:
arch/arm64/boot/dts/freescale/imx8mq.dtsi:687.28-703.5: Warning (
simple_bus_reg): /soc@0/opp-table: missing or empty reg/ranges propertyFixes 64d26f8c1dde ("arm64: dts: imx8mq: Add the opp table and cores opp properties")Signed-off-by Fabio Estevam <[email protected]>
Applied, thanks.
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Hi,
Quoted 60 lines · Fabio Estevam
Move opp-table node from soc node to root node.
opp-table node does not have any register properties and thus shouldn't be placed inside the bus.
This fixes the following build warnings with W=1:
arch/arm64/boot/dts/freescale/imx8mq.dtsi:687.28-703.5: Warning (
simple_bus_reg): /soc@0/opp-table: missing or empty reg/ranges propertyFixes 64d26f8c1dde ("arm64: dts: imx8mq: Add the opp table and cores opp properties")Signed-off-by Fabio Estevam <[email protected]>--- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 37 +++++++++++------------ 1 file changed, 18 insertions(+), 19 deletions(-)arch/arm64/boot/dts/freescale/imx8mq.dtsi +18
-12@@ -132,6 +132,24 @@ }; }; + a53_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <900000>; + clock-latency-ns = <150000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <150000>; + opp-suspend; + }; + }; + pmu { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;@@ -683,25 +701,6 @@ status = "disabled"; }; - - a53_opp_table: opp-table { - compatible = "operating-points-v2"; - opp-shared; - - opp-800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <900000>; - clock-latency-ns = <150000>; - }; - - opp-1000000000 {
arch/arm64/boot/dts/freescale/imx8mq.dtsi line 706
Quoted 10 lines
arch/arm64/boot/dts/freescale/imx8mq.dtsi +0
-7- opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <1000000>; - clock-latency-ns = <150000>; - opp-suspend; - }; - }; - gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, /* GIC Dist */
Just noticed the very same, in case that still matters:
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel