pico-imx6ul, pico-imx7d: Explain how to use eMMC user partition
PATCH 1/1 pico-imx6ul, pico-imx7d: Explain how to use eMMC user partition
The default U-Boot environment expects the use of eMMC user partition. To ensure we are using the proper eMMC partition for boot we need to run the mmc partconf command.
This patch updates the README instructions to avoid users to follow misleading instructions.
---
board/technexion/pico-imx6ul/README | 9 ++++++++- board/technexion/pico-imx7d/README | 9 ++++++++- 2 files changed, 16 insertions(+), 2 deletions(-)
board/technexion/pico-imx6ul/README +8 -1
@@ -50,7 +50,14 @@ Use the default environment variables: 2. Flashing U-Boot into the eMMC -Run the DFU agent so we can flash the new images using dfu-util tool: +The default U-Boot environment expects the use of eMMC user +partition. To ensure we are using the proper eMMC partition for boot, +please run: + +=> mmc partconf 0 0 0 0 + +Next, un the DFU agent so we can flash the new images using dfu-util +tool: => dfu 0 mmc 0
board/technexion/pico-imx7d/README +8 -1
@@ -47,7 +47,14 @@ Use the default environment variables: 2. Flashing U-Boot into the eMMC -Run the DFU agent so we can flash the new images using dfu-util tool: +The default U-Boot environment expects the use of eMMC user +partition. To ensure we are using the proper eMMC partition for boot, +please run: + +=> mmc partconf 0 0 0 0 + +Next, un the DFU agent so we can flash the new images using dfu-util +tool: => dfu 0 mmc 0
Signature · 1 line
2.21.0
Fabio Estevam
reviewerPATCH 1/1 pico-imx6ul, pico-imx7d: Explain how to use eMMC user partition
Hi Otavio,
board/technexion/pico-imx6ul/README Use the default environment variables: · line 59
Quoted 10 lines · Otavio Salvador
2. Flashing U-Boot into the eMMC
board/technexion/pico-imx6ul/README +7
-1-Run the DFU agent so we can flash the new images using dfu-util tool: +The default U-Boot environment expects the use of eMMC user +partition. To ensure we are using the proper eMMC partition for boot, +please run: + +=> mmc partconf 0 0 0 0 + +Next, un the DFU agent so we can flash the new images using dfu-util
Typo: it should be "run" instead of "un"
I tested the instructions and it did not work for me. After I ran these steps I still got the old U-Boot on the eMMC.
The procedure that worked here is:
=> dfu 0 mmc 0
Flash SPL
=> dfu 0 mmc 0
Flash U-Boot proper
=> mmc partconf 0 0 0 0
=> saveenv
PATCH 1/1 pico-imx6ul, pico-imx7d: Explain how to use eMMC user partition
Quoted 19 lines · Fabio Estevam
board/technexion/pico-imx6ul/README Use the default environment variables: · line 59
Quoted 10 lines · Otavio Salvador
2. Flashing U-Boot into the eMMC
board/technexion/pico-imx6ul/README +7
-1-Run the DFU agent so we can flash the new images using dfu-util tool: +The default U-Boot environment expects the use of eMMC user +partition. To ensure we are using the proper eMMC partition for boot, +please run: + +=> mmc partconf 0 0 0 0 + +Next, un the DFU agent so we can flash the new images using dfu-utilTypo: it should be "run" instead of "un"
I tested the instructions and it did not work for me. After I ran these steps I still got the old U-Boot on the eMMC.
The procedure that worked here is:
Quoted 7 lines
=> dfu 0 mmc 0
Flash SPL
=> dfu 0 mmc 0
Flash U-Boot proper=> mmc partconf 0 0 0 0
=> saveenv
I sent a v2.
The order is:
Use the default environment variables:
=> env default -f -a
=> saveenv
To ensure we are using the proper eMMC partition for boot, please run:
=> mmc partconf 0 0 0 0
Next, run the DFU agent so we can flash the new images using dfu-util tool:
=> dfu 0 mmc 0
Flash SPL and u-boot-dtb.img into the eMMC running the following commands on a PC:
$ sudo dfu-util -D SPL -a spl $ sudo dfu-util -D u-boot-dtb.img -a u-boot
The environment setup but be run using the current U-Boot as it has the dfu_alt_info which needs to be used. Please try this sequence and see if it works for you.
Signature · 3 lines
Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750