toradex: common: fix/improve config block handling
v2 cover toradex: common: fix/improve config block handling
This series adds a -y parameter to cfgblock create command, unifies the behaviour when the config block is missing and fixes an off-by-one issue.
Changes in v2:
- Introduced a define for the Toradex OUI ("0x00142dUL") as suggested by Igor.
- Removed redundant comment as suggested by Igor.
Bhuvanchandra DV (1):
toradex: common: unify behaviour when config block is missing
Dominik Sliwa (1):
toradex: configblock: add an -y parameter to 'cfgblock create’
Marcel Ziswiler (1):
tdx-cfg-block: fix off by one issue
board/toradex/common/tdx-cfg-block.c | 41 ++++++++++++++++++---------- board/toradex/common/tdx-common.c | 34 ++++++++++++----------- 2 files changed, 45 insertions(+), 30 deletions(-)
Signature · 1 line
2.20.1
PATCH v2 1/3 toradex: configblock: add an -y parameter to 'cfgblock create’
From: Dominik Sliwa <[email protected]>
Add an optional -y parameter to 'cfgblock create’ to simplify automation.
---
Changes in v2: None
board/toradex/common/tdx-cfg-block.c | 39 ++++++++++++++++++---------- 1 file changed, 26 insertions(+), 13 deletions(-)
board/toradex/common/tdx-cfg-block.c +26 -13
@@ -418,6 +418,7 @@ static int do_cfgblock_create(cmd_tbl_t *cmdtp, int flag, int argc,int offset =0 ;int ret =CMD_RET_SUCCESS ;int err; +int force_overwrite =0 ;/* Allocate RAM area for config block */ config_block =memalign (ARCH_DMA_MINALIGN , size);
@@ -428,6 +429,11 @@ static int do_cfgblock_create(cmd_tbl_t *cmdtp, int flag, int argc,memset (config_block,0xff , size); +if (argc >=3 ) { +if (argv[2 ][0 ] =='-' && argv[2 ][1 ] =='y' ) + force_overwrite =1 ; + } +read_tdx_cfg_block ();if (valid_cfgblock) {#if defined(CONFIG_TDX_CFG_BLOCK_IS_IN_NAND )
@@ -448,24 +454,31 @@ static int do_cfgblock_create(cmd_tbl_t *cmdtp, int flag, int argc, CONFIG_TDX_CFG_BLOCK_OFFSET); goto out;#else -char message[CONFIG_SYS_CBSIZE ]; -sprintf (message, -"A valid Toradex config block is present, still recreate? [y/N] " ); +if (!force_overwrite) { +char message[CONFIG_SYS_CBSIZE ]; -if (!cli_readline (message)) - goto out; +sprintf (message, +"A valid Toradex config block is present, still recreate? [y/N] " ); -if (console_buffer[0 ] !='y' && console_buffer[0 ] !='Y' ) - goto out; +if (!cli_readline (message)) + goto out; + +if (console_buffer[0 ] !='y' && + console_buffer[0 ] !='Y' ) + goto out; + }#endif }/* Parse new Toradex config block data... */ -if (argc <3 ) +if (argc <3 || (force_overwrite && argc <4 )) { err =get_cfgblock_interactive (); -else - err =get_cfgblock_barcode (argv[2 ]); - + }else { +if (force_overwrite) + err =get_cfgblock_barcode (argv[3 ]); +else + err =get_cfgblock_barcode (argv[2 ]); + }if (err) { ret =CMD_RET_FAILURE ; goto out;
@@ -549,8 +562,8 @@ static int do_cfgblock(cmd_tbl_t *cmdtp, int flag, int argc, }U_BOOT_CMD ( - cfgblock,3 ,0 , do_cfgblock, + cfgblock,4 ,0 , do_cfgblock,"Toradex config block handling commands" , -"create [barcode] - (Re-)create Toradex config block\n" +"create [-y] [barcode] - (Re-)create Toradex config block\n" "cfgblock reload - Reload Toradex config block from flash" );
Signature · 1 line
2.20.1
PATCH v2 2/3 toradex: common: unify behaviour when config block is missing
In reply to Marcel ZiswilerFrom: Bhuvanchandra DV <[email protected]>
If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block.
---
Changes in v2:
- Introduced a define for the Toradex OUI ("0x00142dUL") as suggested by Igor.
- Removed redundant comment as suggested by Igor.
board/toradex/common/tdx-common.c | 34 ++++++++++++++++--------------- 1 file changed, 18 insertions(+), 16 deletions(-)
board/toradex/common/tdx-common.c +18 -16
@@ -12,6 +12,8 @@#include <asm/setup.h> #include "tdx-common.h" +#define TORADEX_OUI 0x00142dUL +#ifdef CONFIG_TDX_CFG_BLOCK static char tdx_serial_str[9 ];static char tdx_board_rev_str[6 ];
@@ -68,20 +70,25 @@ int show_board_info(void)unsigned char ethaddr[6 ];if (read_tdx_cfg_block ()) { -printf ("Missing Toradex config block\n" ); +printf ("MISSING TORADEX CONFIG BLOCK\n" ); + tdx_eth_addr.oui =htonl (TORADEX_OUI <<8 ); + tdx_eth_addr.nic =htonl (tdx_serial <<8 );checkboard (); -return 0 ; + }else { +sprintf (tdx_serial_str,"%08u" , tdx_serial); +sprintf (tdx_board_rev_str,"V%1d.%1d%c" , + tdx_hw_tag.ver_major, + tdx_hw_tag.ver_minor, + (char )tdx_hw_tag.ver_assembly +'A' ); + +env_set ("serial#" , tdx_serial_str); + +printf ("Model: Toradex %s %s, Serial# %s\n" , + toradex_modules[tdx_hw_tag.prodid], + tdx_board_rev_str, + tdx_serial_str); } -/* board serial-number */ -sprintf (tdx_serial_str,"%08u" , tdx_serial); -sprintf (tdx_board_rev_str,"V%1d.%1d%c" , - tdx_hw_tag.ver_major, - tdx_hw_tag.ver_minor, - (char )tdx_hw_tag.ver_assembly +'A' ); - -env_set ("serial#" , tdx_serial_str); -/* * Check if environment contains a valid MAC address, * set the one from config block if not
@@ -101,11 +108,6 @@ int show_board_info(void) }#endif -printf ("Model: Toradex %s %s, Serial# %s\n" , - toradex_modules[tdx_hw_tag.prodid], - tdx_board_rev_str, - tdx_serial_str); -return 0 ; }
Signature · 1 line
2.20.1
PATCH v2 2/3 toradex: common: unify behaviour when config block is missing
Quoted 89 lines · Marcel Ziswiler
From: Bhuvanchandra DV <[email protected]>
If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block.
Signed-off-by Bhuvanchandra DV <[email protected]>Acked-by Marcel Ziswiler <[email protected]>---
Changes in v2:
- Introduced a define for the Toradex OUI ("0x00142dUL") as suggested by Igor.
- Removed redundant comment as suggested by Igor.board/toradex/common/tdx-common.c | 34 ++++++++++++++++--------------- 1 file changed, 18 insertions(+), 16 deletions(-)board/toradex/common/tdx-common.c +18
-17@@ -12,6 +12,8 @@#include <asm/setup.h> #include "tdx-common.h" +#define TORADEX_OUI 0x00142dUL +#ifdef CONFIG_TDX_CFG_BLOCK static char tdx_serial_str[9 ];static char tdx_board_rev_str[6 ];@@ -68,20 +70,25 @@ int show_board_info(void)unsigned char ethaddr[6 ];if (read_tdx_cfg_block ()) { -printf ("Missing Toradex config block\n" ); +printf ("MISSING TORADEX CONFIG BLOCK\n" ); + tdx_eth_addr.oui =htonl (TORADEX_OUI <<8 ); + tdx_eth_addr.nic =htonl (tdx_serial <<8 );checkboard (); -return 0 ; + }else { +sprintf (tdx_serial_str,"%08u" , tdx_serial); +sprintf (tdx_board_rev_str,"V%1d.%1d%c" , + tdx_hw_tag.ver_major, + tdx_hw_tag.ver_minor, + (char )tdx_hw_tag.ver_assembly +'A' ); + +env_set ("serial#" , tdx_serial_str); + +printf ("Model: Toradex %s %s, Serial# %s\n" , + toradex_modules[tdx_hw_tag.prodid], + tdx_board_rev_str, + tdx_serial_str); } -/* board serial-number */ -sprintf (tdx_serial_str,"%08u" , tdx_serial); -sprintf (tdx_board_rev_str,"V%1d.%1d%c" , - tdx_hw_tag.ver_major, - tdx_hw_tag.ver_minor, - (char )tdx_hw_tag.ver_assembly +'A' ); - -env_set ("serial#" , tdx_serial_str); -/* * Check if environment contains a valid MAC address, * set the one from config block if not @@ -101,11 +108,6 @@ int show_board_info(void) }#endif -printf ("Model: Toradex %s %s, Serial# %s\n" , - toradex_modules[tdx_hw_tag.prodid], - tdx_board_rev_str, - tdx_serial_str); -return 0 ; } --2.20.1
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
PATCH v2 3/3 tdx-cfg-block: fix off by one issue
In reply to Marcel ZiswilerFrom: Marcel Ziswiler <[email protected]>
Fix toradex_modules array off by one issue potentially leading to spurious printout during boot e.g.
Model: Toradex V1.2A,
instead of
Model: Toradex UNKNOWN MODULE V1.2A.
---
Changes in v2: None
board/toradex/common/tdx-cfg-block.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
board/toradex/common/tdx-cfg-block.c +1 -1
@@ -261,7 +261,7 @@ int read_tdx_cfg_block(void) }/* Cap product id to avoid issues with a yet unknown one */ -if (tdx_hw_tag.prodid > (sizeof (toradex_modules) / +if (tdx_hw_tag.prodid >= (sizeof (toradex_modules) /sizeof (toradex_modules[0 ]))) tdx_hw_tag.prodid =0 ;
Signature · 1 line
2.20.1