perf/core: Restore mmap record type correctly
Subsystems (5)
Sasha Levin
maintainerPATCH 6/21 IB/mlx4: Fix race condition between catas error reset and aliasguid flows
In reply to Sasha LevinFrom: Jack Morgenstein <[email protected]>
[ Upstream commit 587443e7773e150ae29e643ee8f41a1eed226565 ]
Code review revealed a race condition which could allow the catas error flow to interrupt the alias guid query post mechanism at random points. Thiis is fixed by doing cancel_delayed_work_sync() instead of cancel_delayed_work() during the alias guid mechanism destroy flow.
--- drivers/infiniband/hw/mlx4/alias_GUID.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/hw/mlx4/alias_GUID.c +1 -1
@@ -805,8 +805,8 @@ void mlx4_ib_destroy_alias_guid_service(struct mlx4_ib_dev *dev)unsigned long flags;for (i =0 ; i < dev->num_ports; i++) { -cancel_delayed_work (&dev->sriov.alias_guid.ports_guid[i].alias_guid_work); det = &sriov->alias_guid.ports_guid[i]; +cancel_delayed_work_sync (&det->alias_guid_work);spin_lock_irqsave (&sriov->alias_guid.ag_work_lock, flags);while (!list_empty (&det->cb_list)) { cb_ctx = list_entry(det->cb_list.next,
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 7/21 mmc: davinci: remove extraneous __init annotation
In reply to Sasha LevinFrom: Arnd Bergmann <[email protected]>
[ Upstream commit 9ce58dd7d9da3ca0d7cb8c9568f1c6f4746da65a ]
Building with clang finds a mistaken __init tag:
WARNING: vmlinux.o(.text+0x5e4250): Section mismatch in reference from the function davinci_mmcsd_probe() to the function .init.text:init_mmcsd_host() The function davinci_mmcsd_probe() references
the function __init init_mmcsd_host().
This is often because davinci_mmcsd_probe lacks a __init
annotation or the annotation of init_mmcsd_host is wrong.
--- drivers/mmc/host/davinci_mmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/mmc/host/davinci_mmc.c +1 -1
@@ -1147,7 +1147,7 @@ static inline void mmc_davinci_cpufreq_deregister(struct mmc_davinci_host *host) { }#endif -static void __init init_mmcsd_host (struct mmc_davinci_host *host) +static void init_mmcsd_host (struct mmc_davinci_host *host) {mmc_davinci_reset_ctrl (host,1 );
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 9/21 thermal/int340x_thermal: Add additional UUIDs
In reply to Sasha LevinFrom: Matthew Garrett <[email protected]>
[ Upstream commit 16fc8eca1975358111dbd7ce65e4ce42d1a848fb ]
Add more supported DPTF policies than the driver currently exposes.
--- drivers/thermal/int340x_thermal/int3400_thermal.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
drivers/thermal/int340x_thermal/int3400_thermal.c +14 -0
@@ -20,6 +20,13 @@ enum int3400_thermal_uuid {INT3400_THERMAL_PASSIVE_1 ,INT3400_THERMAL_ACTIVE ,INT3400_THERMAL_CRITICAL , +INT3400_THERMAL_ADAPTIVE_PERFORMANCE , +INT3400_THERMAL_EMERGENCY_CALL_MODE , +INT3400_THERMAL_PASSIVE_2 , +INT3400_THERMAL_POWER_BOSS , +INT3400_THERMAL_VIRTUAL_SENSOR , +INT3400_THERMAL_COOLING_MODE , +INT3400_THERMAL_HARDWARE_DUTY_CYCLING , INT3400_THERMAL_MAXIMUM_UUID, };
@@ -27,6 +34,13 @@ static u8 *int3400_thermal_uuids[INT3400_THERMAL_MAXIMUM_UUID] = {"42A441D6-AE6A-462b-A84B-4A8CE79027D3" ,"3A95C389-E4B8-4629-A526-C52C88626BAE" ,"97C68AE7-15FA-499c-B8C9-5DA81D606E0A" , +"63BE270F-1C11-48FD-A6F7-3AF253FF3E2D" , +"5349962F-71E6-431D-9AE8-0A635B710AEE" , +"9E04115A-AE87-4D1C-9500-0F3E340BFE75" , +"F5A35014-C209-46A4-993A-EB56DE7530A1" , +"6ED722A7-9240-48A5-B479-31EEF723D7CF" , +"16CAF1B7-DD38-40ED-B1C1-1B8A1913D531" , + "BE84BABF-C4D4-403D-B495-3128FD44dAC1", }; struct int3400_thermal_priv {
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 10/21 thermal/int340x_thermal: fix mode setting
In reply to Sasha LevinFrom: Matthew Garrett <[email protected]>
[ Upstream commit 396ee4d0cd52c13b3f6421b8d324d65da5e7e409 ]
int3400 only pushes the UUID into the firmware when the mode is flipped to "enable". The current code only exposes the mode flag if the firmware supports the PASSIVE_1 UUID, which not all machines do. Remove the restriction.
--- drivers/thermal/int340x_thermal/int3400_thermal.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/thermal/int340x_thermal/int3400_thermal.c +3 -4
@@ -285,10 +285,9 @@ static int int3400_thermal_probe(struct platform_device *pdev)platform_set_drvdata (pdev, priv); -if (priv->uuid_bitmap &1 <<INT3400_THERMAL_PASSIVE_1 ) { - int3400_thermal_ops.get_mode = int3400_thermal_get_mode; - int3400_thermal_ops.set_mode = int3400_thermal_set_mode; - } + int3400_thermal_ops.get_mode = int3400_thermal_get_mode; + int3400_thermal_ops.set_mode = int3400_thermal_set_mode; + priv->thermal =thermal_zone_device_register ("INT3400 Thermal" ,0 ,0 , priv, &int3400_thermal_ops, &int3400_thermal_params,0 ,0 );
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 11/21 tools/power turbostat: return the exit status of a command
In reply to Sasha LevinFrom: David Arcari <[email protected]>
[ Upstream commit 2a95496634a017c19641f26f00907af75b962f01 ]
turbostat failed to return a non-zero exit status even though the supplied command (turbostat <command>) failed. Currently when turbostat forks a command it returns zero instead of the actual exit status of the command. Modify the code to return the exit status.
--- tools/power/x86/turbostat/turbostat.c | 3 +++ 1 file changed, 3 insertions(+)
tools/power/x86/turbostat/turbostat.c +3 -0
@@ -3089,6 +3089,9 @@ int fork_it(char **argv)signal (SIGQUIT ,SIG_IGN );if (waitpid (child_pid, &status,0 ) ==-1 )err (status,"waitpid" ); + +if (WIFEXITED (status)) + status =WEXITSTATUS (status); }/* * n.b. fork_it() does not check for errors from for_all_cpus()
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 18/21 iommu/vt-d: Check capability before disabling protected memory
In reply to Sasha LevinFrom: Lu Baolu <[email protected]>
[ Upstream commit 5bb71fc790a88d063507dc5d445ab8b14e845591 ]
The spec states in 10.4.16 that the Protected Memory Enable Register should be treated as read-only for implementations not supporting protected memory regions (PLMR and PHMR fields reported as Clear in the Capability register).
--- drivers/iommu/intel-iommu.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/iommu/intel-iommu.c +3 -0
@@ -1598,6 +1598,9 @@ static void iommu_disable_protect_mem_regions(struct intel_iommu *iommu)u32 pmen;unsigned long flags; +if (!cap_plmr (iommu->cap) && !cap_phmr (iommu->cap)) +return ; +raw_spin_lock_irqsave (&iommu->register_lock, flags); pmen =readl (iommu->reg +DMAR_PMEN_REG ); pmen &= ~DMA_PMEN_EPM ;
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 4/21 ALSA: echoaudio: add a check for ioremap_nocache
In reply to Sasha LevinFrom: Kangjie Lu <[email protected]>
[ Upstream commit 6ade657d6125ec3ec07f95fa51e28138aef6208f ]
In case ioremap_nocache fails, the fix releases chip and returns an error code upstream to avoid NULL pointer dereference.
--- sound/pci/echoaudio/echoaudio.c | 5 +++++ 1 file changed, 5 insertions(+)
sound/pci/echoaudio/echoaudio.c +5 -0
@@ -1953,6 +1953,11 @@ static int snd_echo_create(struct snd_card *card, } chip->dsp_registers = (volatile u32 __iomem *)ioremap_nocache (chip->dsp_registers_phys, sz); +if (!chip->dsp_registers) { +dev_err (chip->card->dev,"ioremap failed\n" ); +snd_echo_free (chip); +return -ENOMEM ; + }if (request_irq (pci->irq, snd_echo_interrupt,IRQF_SHARED ,KBUILD_MODNAME , chip)) {
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 5/21 ALSA: sb8: add a check for request_region
In reply to Sasha LevinFrom: Kangjie Lu <[email protected]>
[ Upstream commit dcd0feac9bab901d5739de51b3f69840851f8919 ]
In case request_region fails, the fix returns an error code to avoid NULL pointer dereference.
--- sound/isa/sb/sb8.c | 4 ++++ 1 file changed, 4 insertions(+)
sound/isa/sb/sb8.c +4 -0
@@ -111,6 +111,10 @@ static int snd_sb8_probe(struct device *pdev, unsigned int dev)/* block the 0x388 port to avoid PnP conflicts */ acard->fm_res =request_region (0x388 ,4 ,"SoundBlaster FM" ); +if (!acard->fm_res) { + err = -EBUSY ; + goto _err; + } if (port[dev] != SNDRV_AUTO_PORT) { if ((err = snd_sbdsp_create(card, port[dev], irq[dev],
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 12/21 perf top: Fix error handling in cmd_top()
In reply to Sasha LevinFrom: Changbin Du <[email protected]>
[ Upstream commit 70c819e4bf1c5f492768b399d898d458ccdad2b6 ]
We should go to the cleanup path, to avoid leaks, detected using gcc's ASan.
--- tools/perf/builtin-top.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
tools/perf/builtin-top.c +3 -2
@@ -1320,8 +1320,9 @@ int cmd_top(int argc, const char **argv, const char *prefix __maybe_unused) symbol_conf.priv_size =sizeof (struct annotation ); symbol_conf.try_vmlinux_path = (symbol_conf.vmlinux_name ==NULL ); -if (symbol__init (NULL ) <0 ) -return -1 ; + status =symbol__init (NULL ); +if (status <0 ) + goto out_delete_evlist;sort__setup_elide (stdout);
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 13/21 perf evsel: Free evsel->counts in perf_evsel__exit()
In reply to Sasha LevinFrom: Arnaldo Carvalho de Melo <[email protected]>
[ Upstream commit 42dfa451d825a2ad15793c476f73e7bbc0f9d312 ]
Using gcc's ASan, Changbin reports:
=================================================================
==7494==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 48 byte(s) in 1 object(s) allocated from:
#0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
#1 0x5625e5330a5e in zalloc util/util.h:23
#2 0x5625e5330a9b in perf_counts__new util/counts.c:10
#3 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47
#4 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505
#5 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347
#6 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47
#7 0x5625e51528e6 in run_test tests/builtin-test.c:358
#8 0x5625e5152baf in test_and_print tests/builtin-test.c:388
#9 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
#10 0x5625e515572f in cmd_test tests/builtin-test.c:722
#11 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
#12 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
#13 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
#14 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
#15 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)Indirect leak of 72 byte(s) in 1 object(s) allocated from:
#0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
#1 0x5625e532560d in zalloc util/util.h:23
#2 0x5625e532566b in xyarray__new util/xyarray.c:10
#3 0x5625e5330aba in perf_counts__new util/counts.c:15
#4 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47
#5 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505
#6 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347
#7 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47
#8 0x5625e51528e6 in run_test tests/builtin-test.c:358
#9 0x5625e5152baf in test_and_print tests/builtin-test.c:388
#10 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
#11 0x5625e515572f in cmd_test tests/builtin-test.c:722
#12 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
#13 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
#14 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
#15 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
#16 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)His patch took care of evsel->prev_raw_counts, but the above backtraces are about evsel->counts, so fix that instead.
--- tools/perf/util/evsel.c | 1 + 1 file changed, 1 insertion(+)
tools/perf/util/evsel.c +1 -0
@@ -1051,6 +1051,7 @@ void perf_evsel__exit(struct perf_evsel *evsel) {assert (list_empty (&evsel->node));assert (evsel->evlist ==NULL ); +perf_evsel__free_counts (evsel);perf_evsel__free_fd (evsel);perf_evsel__free_id (evsel);perf_evsel__free_config_terms (evsel);
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 15/21 perf tests: Fix a memory leak in test__perf_evsel__tp_sched_test()
In reply to Sasha LevinFrom: Changbin Du <[email protected]>
[ Upstream commit d982b33133284fa7efa0e52ae06b88f9be3ea764 ]
=================================================================
==20875==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 1160 byte(s) in 1 object(s) allocated from:
#0 0x7f1b6fc84138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
#1 0x55bd50005599 in zalloc util/util.h:23
#2 0x55bd500068f5 in perf_evsel__newtp_idx util/evsel.c:327
#3 0x55bd4ff810fc in perf_evsel__newtp /home/work/linux/tools/perf/util/evsel.h:216
#4 0x55bd4ff81608 in test__perf_evsel__tp_sched_test tests/evsel-tp-sched.c:69
#5 0x55bd4ff528e6 in run_test tests/builtin-test.c:358
#6 0x55bd4ff52baf in test_and_print tests/builtin-test.c:388
#7 0x55bd4ff543fe in __cmd_test tests/builtin-test.c:583
#8 0x55bd4ff5572f in cmd_test tests/builtin-test.c:722
#9 0x55bd4ffc4087 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
#10 0x55bd4ffc45c6 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
#11 0x55bd4ffc49ca in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
#12 0x55bd4ffc5138 in main /home/changbin/work/linux/tools/perf/perf.c:520
#13 0x7f1b6e34809a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)Indirect leak of 19 byte(s) in 1 object(s) allocated from:
#0 0x7f1b6fc83f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30)
#1 0x7f1b6e3ac30f in vasprintf (/lib/x86_64-linux-gnu/libc.so.6+0x8830f)--- tools/perf/tests/evsel-tp-sched.c | 1 + 1 file changed, 1 insertion(+)
tools/perf/tests/evsel-tp-sched.c +1 -0
@@ -84,5 +84,6 @@ int test__perf_evsel__tp_sched_test(void)if (perf_evsel__test_field (evsel,"target_cpu" ,4 , true)) ret =-1 ; +perf_evsel__delete (evsel);return ret; }
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 16/21 x86/hpet: Prevent potential NULL pointer dereference
In reply to Sasha LevinFrom: Aditya Pakki <[email protected]>
[ Upstream commit 2e84f116afca3719c9d0a1a78b47b48f75fd5724 ]
hpet_virt_address may be NULL when ioremap_nocache fail, but the code lacks a check.
Add a check to prevent NULL pointer dereference.
--- arch/x86/kernel/hpet.c | 2 ++ 1 file changed, 2 insertions(+)
arch/x86/kernel/hpet.c +2 -0
@@ -825,6 +825,8 @@ int __init hpet_enable(void)return 0 ;hpet_set_mapping (); +if (!hpet_virt_address) +return 0 ;/* * Read the period and check for a sane value:
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 20/21 fix incorrect error code mapping for OBJECTID_NOT_FOUND
In reply to Sasha LevinFrom: Steve French <[email protected]>
[ Upstream commit 85f9987b236cf46e06ffdb5c225cf1f3c0acb789 ]
It was mapped to EIO which can be confusing when user space queries for an object GUID for an object for which the server file system doesn't support (or hasn't saved one).
As Amir Goldstein suggested this is similar to ENOATTR (equivalently ENODATA in Linux errno definitions) so changing NT STATUS code mapping for OBJECTID_NOT_FOUND to ENODATA.
--- fs/cifs/smb2maperror.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
fs/cifs/smb2maperror.c +2 -1
@@ -1034,7 +1034,8 @@ static const struct status_to_posix_error smb2_error_map_table[] = { {STATUS_UNFINISHED_CONTEXT_DELETED , -EIO , "STATUS_UNFINISHED_CONTEXT_DELETED"}, {STATUS_NO_TGT_REPLY, -EIO, "STATUS_NO_TGT_REPLY"}, - {STATUS_OBJECTID_NOT_FOUND, -EIO, "STATUS_OBJECTID_NOT_FOUND"}, +/* Note that ENOATTTR and ENODATA are the same errno */ + {STATUS_OBJECTID_NOT_FOUND, -ENODATA, "STATUS_OBJECTID_NOT_FOUND"}, {STATUS_NO_IP_ADDRESSES, -EIO, "STATUS_NO_IP_ADDRESSES"}, {STATUS_WRONG_CREDENTIAL_HANDLE, -EIO, "STATUS_WRONG_CREDENTIAL_HANDLE"},
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 19/21 x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error
In reply to Sasha LevinFrom: Nathan Chancellor <[email protected]>
[ Upstream commit e898e69d6b9475bf123f99b3c5d1a67bb7cb2361 ]
When building with -Wsometimes-uninitialized, Clang warns:
arch/x86/kernel/hw_breakpoint.c:355:2: warning: variable 'align' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized]
The default cannot be reached because arch_build_bp_info() initializes hw->len to one of the specified cases. Nevertheless the warning is valid and returning -EINVAL makes sure that this cannot be broken by future modifications.
--- arch/x86/kernel/hw_breakpoint.c | 1 + 1 file changed, 1 insertion(+)
arch/x86/kernel/hw_breakpoint.c +1 -0
@@ -351,6 +351,7 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp)#endif default :WARN_ON_ONCE (1 ); +return -EINVAL ; }/*
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 21/21 ext4: prohibit fstrim in norecovery mode
In reply to Sasha LevinFrom: "Darrick J. Wong" <[email protected]>
[ Upstream commit 18915b5873f07e5030e6fb108a050fa7c71c59fb ]
The ext4 fstrim implementation uses the block bitmaps to find free space that can be discarded. If we haven't replayed the journal, the bitmaps will be stale and we absolutely *cannot* use stale metadata to zap the underlying storage.
--- fs/ext4/ioctl.c | 7 +++++++ 1 file changed, 7 insertions(+)
fs/ext4/ioctl.c +7 -0
@@ -599,6 +599,13 @@ long ext4_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)if (!blk_queue_discard (q))return -EOPNOTSUPP ; +/* +* We haven't replayed the journal, so we cannot use our +* block-bitmap-guided storage zapping commands. +*/ +if (test_opt (sb,NOLOAD ) &&ext4_has_feature_journal (sb)) +return -EROFS ; +if (copy_from_user (&range, (struct fstrim_range __user *)arg,sizeof (range)))return -EFAULT ;
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 17/21 x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors
In reply to Sasha LevinFrom: Matthew Whitehead <[email protected]>
[ Upstream commit 18fb053f9b827bd98cfc64f2a35df8ab19745a1d ]
There are comments in processor-cyrix.h advising you to _not_ make calls using the deprecated macros in this style:
setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);
This is because it expands the macro into a non-functioning calling sequence. The calling order must be:
outb(CX86_CCR2, 0x22); inb(0x23);
From the comments:
* When using the old macros a line like
* setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
* gets expanded to:
* do {
* outb((CX86_CCR2), 0x22);
* outb((({
* outb((CX86_CCR2), 0x22);
* inb(0x23);
* }) | 0x88), 0x23);
* } while (0);
The new macros fix this problem, so use them instead. Tested on an actual Geode processor.
--- arch/x86/kernel/cpu/cyrix.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
arch/x86/kernel/cpu/cyrix.c +7 -7
@@ -121,7 +121,7 @@ static void set_cx86_reorder(void)setCx86 (CX86_CCR3 , (ccr3 &0x0f ) |0x10 );/* enable MAPEN */ /* Load/Store Serialize to mem access disable (=reorder it) */ -setCx86_old (CX86_PCR0 ,getCx86_old (CX86_PCR0 ) & ~0x80 ); +setCx86 (CX86_PCR0 ,getCx86 (CX86_PCR0 ) & ~0x80 );/* set load/store serialize from 1GB to 4GB */ ccr3 |=0xe0 ;setCx86 (CX86_CCR3 , ccr3);
@@ -132,11 +132,11 @@ static void set_cx86_memwb(void)printk (KERN_INFO "Enable Memory-Write-back mode on Cyrix/NSC processor.\n" );/* CCR2 bit 2: unlock NW bit */ -setCx86_old (CX86_CCR2 ,getCx86_old (CX86_CCR2 ) & ~0x04 ); +setCx86 (CX86_CCR2 ,getCx86 (CX86_CCR2 ) & ~0x04 );/* set 'Not Write-through' */ write_cr0 (read_cr0 () |X86_CR0_NW );/* CCR2 bit 2: lock NW bit and set WT1 */ -setCx86_old (CX86_CCR2 ,getCx86_old (CX86_CCR2 ) |0x14 ); +setCx86 (CX86_CCR2 ,getCx86 (CX86_CCR2 ) |0x14 ); }/*
@@ -150,14 +150,14 @@ static void geode_configure(void)local_irq_save (flags);/* Suspend on halt power saving and enable #SUSP pin */ -setCx86_old (CX86_CCR2 ,getCx86_old (CX86_CCR2 ) |0x88 ); +setCx86 (CX86_CCR2 ,getCx86 (CX86_CCR2 ) |0x88 ); ccr3 =getCx86 (CX86_CCR3 );setCx86 (CX86_CCR3 , (ccr3 &0x0f ) |0x10 );/* enable MAPEN */ /* FPU fast, DTE cache, Mem bypass */ -setCx86_old (CX86_CCR4 ,getCx86_old (CX86_CCR4 ) |0x38 ); +setCx86 (CX86_CCR4 ,getCx86 (CX86_CCR4 ) |0x38 );setCx86 (CX86_CCR3 , ccr3);/* disable MAPEN */ set_cx86_memwb ();
@@ -292,7 +292,7 @@ static void init_cyrix(struct cpuinfo_x86 *c)/* GXm supports extended cpuid levels 'ala' AMD */ if (c->cpuid_level ==2 ) {/* Enable cxMMX extensions (GX1 Datasheet 54) */ -setCx86_old (CX86_CCR7 ,getCx86_old (CX86_CCR7 ) |1 ); +setCx86 (CX86_CCR7 ,getCx86 (CX86_CCR7 ) |1 );/* * GXm : 0x30 ... 0x5f GXm datasheet 51
@@ -315,7 +315,7 @@ static void init_cyrix(struct cpuinfo_x86 *c)if (dir1 >7 ) { dir0_msn++;/* M II */ /* Enable MMX extensions (App note 108) */ -setCx86_old (CX86_CCR7 ,getCx86_old (CX86_CCR7 )|1 ); +setCx86 (CX86_CCR7 ,getCx86 (CX86_CCR7 )|1 ); }else {/* A 6x86MX - it has the bug. */ set_cpu_bug (c,X86_BUG_COMA );
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 14/21 perf tests: Fix a memory leak of cpu_map object in the openat_syscall_event_on_all_cpus test
In reply to Sasha LevinFrom: Changbin Du <[email protected]>
[ Upstream commit 93faa52e8371f0291ee1ff4994edae2b336b6233 ]
=================================================================
==7497==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f0333a88f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30)
#1 0x5625e5326213 in cpu_map__trim_new util/cpumap.c:45
#2 0x5625e5326703 in cpu_map__read util/cpumap.c:103
#3 0x5625e53267ef in cpu_map__read_all_cpu_map util/cpumap.c:120
#4 0x5625e5326915 in cpu_map__new util/cpumap.c:135
#5 0x5625e517b355 in test__openat_syscall_event_on_all_cpus tests/openat-syscall-all-cpus.c:36
#6 0x5625e51528e6 in run_test tests/builtin-test.c:358
#7 0x5625e5152baf in test_and_print tests/builtin-test.c:388
#8 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
#9 0x5625e515572f in cmd_test tests/builtin-test.c:722
#10 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
#11 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
#12 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
#13 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
#14 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)--- tools/perf/tests/openat-syscall-all-cpus.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
tools/perf/tests/openat-syscall-all-cpus.c +3 -1
@@ -35,7 +35,7 @@ int test__openat_syscall_event_on_all_cpus(void)if (IS_ERR (evsel)) {tracing_path__strerror_open_tp (errno, errbuf,sizeof (errbuf),"syscalls" ,"sys_enter_openat" );pr_debug ("%s\n" , errbuf); - goto out_thread_map_delete; + goto out_cpu_map_delete; }if (perf_evsel__open (evsel, cpus, threads) <0 ) {
@@ -109,6 +109,8 @@ int test__openat_syscall_event_on_all_cpus(void)perf_evsel__close_fd (evsel,1 , threads->nr); out_evsel_delete:perf_evsel__delete (evsel); +out_cpu_map_delete: +cpu_map__put (cpus); out_thread_map_delete:thread_map__put (threads);return err;
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 8/21 ALSA: opl3: fix mismatch between snd_opl3_drum_switch definition and declaration
In reply to Sasha LevinFrom: Colin Ian King <[email protected]>
[ Upstream commit b4748e7ab731e436cf5db4786358ada5dd2db6dd ]
The function snd_opl3_drum_switch declaration in the header file has the order of the two arguments on_off and vel swapped when compared to the definition arguments of vel and on_off. Fix this by swapping them around to match the definition.
This error predates the git history, so no idea when this error was introduced.
--- sound/drivers/opl3/opl3_voice.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
sound/drivers/opl3/opl3_voice.h +1 -1
@@ -41,7 +41,7 @@ void snd_opl3_timer_func(unsigned long data);/* Prototypes for opl3_drums.c */ void snd_opl3_load_drums (struct snd_opl3 *opl3); -void snd_opl3_drum_switch (struct snd_opl3 *opl3,int note,int on_off,int vel,struct snd_midi_channel *chan); +void snd_opl3_drum_switch (struct snd_opl3 *opl3,int note,int vel,int on_off,struct snd_midi_channel *chan);/* Prototypes for opl3_oss.c */ #ifdef CONFIG_SND_SEQUENCER_OSS
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 3/21 ext4: report real fs size after failed resize
In reply to Sasha LevinFrom: Lukas Czerner <[email protected]>
[ Upstream commit 6c7328400e0488f7d49e19e02290ba343b6811b2 ]
Currently when the file system resize using ext4_resize_fs() fails it will report into log that "resized filesystem to <requested block count>". However this may not be true in the case of failure. Use the current block count as returned by ext4_blocks_count() to report the block count.
Additionally, report a warning that "error occurred during file system resize"
--- fs/ext4/resize.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
fs/ext4/resize.c +5 -1
@@ -2047,6 +2047,10 @@ int ext4_resize_fs(struct super_block *sb, ext4_fsblk_t n_blocks_count)free_flex_gd (flex_gd);if (resize_inode !=NULL )iput (resize_inode); -ext4_msg (sb,KERN_INFO ,"resized filesystem to %llu" , n_blocks_count); +if (err) +ext4_warning (sb,"error (%d) occurred during " +"file system resize" , err); +ext4_msg (sb,KERN_INFO ,"resized filesystem to %llu" , +ext4_blocks_count (es));return err; }
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 2/21 ext4: add missing brelse() in add_new_gdb_meta_bg()
In reply to Sasha LevinFrom: Lukas Czerner <[email protected]>
[ Upstream commit d64264d6218e6892edd832dc3a5a5857c2856c53 ]
Currently in add_new_gdb_meta_bg() there is a missing brelse of gdb_bh in case ext4_journal_get_write_access() fails.
Additionally kvfree() is missing in the same error path. Fix it by moving the ext4_journal_get_write_access() before the ext4 sb update as Ted suggested and release n_group_desc and gdb_bh in case it fails.
--- fs/ext4/resize.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
fs/ext4/resize.c +9 -2
@@ -907,11 +907,18 @@ static int add_new_gdb_meta_bg(struct super_block *sb,memcpy (n_group_desc, o_group_desc,EXT4_SB (sb)->s_gdb_count *sizeof (struct buffer_head *)); n_group_desc[gdb_num] = gdb_bh; + +BUFFER_TRACE (gdb_bh,"get_write_access" ); + err =ext4_journal_get_write_access (handle, gdb_bh); +if (err) { +kvfree (n_group_desc); +brelse (gdb_bh); +return err; + } +EXT4_SB (sb)->s_group_desc = n_group_desc;EXT4_SB (sb)->s_gdb_count++;kvfree (o_group_desc); -BUFFER_TRACE (gdb_bh,"get_write_access" ); - err =ext4_journal_get_write_access (handle, gdb_bh);return err; }
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 1/21 perf/core: Restore mmap record type correctly
From: Stephane Eranian <[email protected]>
[ Upstream commit d9c1bb2f6a2157b38e8eb63af437cb22701d31ee ]
On mmap(), perf_events generates a RECORD_MMAP record and then checks which events are interested in this record. There are currently 2 versions of mmap records: RECORD_MMAP and RECORD_MMAP2. MMAP2 is larger. The event configuration controls which version the user level tool accepts.
If the event->attr.mmap2=1 field then MMAP2 record is returned. The perf_event_mmap_output() takes care of this. It checks attr->mmap2 and corrects the record fields before putting it in the sampling buffer of the event. At the end the function restores the modified MMAP record fields.
The problem is that the function restores the size but not the type. Thus, if a subsequent event only accepts MMAP type, then it would instead receive an MMAP2 record with a size of MMAP record.
This patch fixes the problem by restoring the record type on exit.
--- kernel/events/core.c | 2 ++ 1 file changed, 2 insertions(+)
kernel/events/core.c +2 -0
@@ -5998,6 +5998,7 @@ static void perf_event_mmap_output(struct perf_event *event,struct perf_output_handle handle;struct perf_sample_data sample;int size = mmap_event->event_id.header.size; +u32 type = mmap_event->event_id.header.type;int ret;if (!perf_event_mmap_match (event, data))
@@ -6041,6 +6042,7 @@ static void perf_event_mmap_output(struct perf_event *event,perf_output_end (&handle); out: mmap_event->event_id.header.size = size; + mmap_event->event_id.header.type = type; }static void perf_event_mmap_event (struct perf_mmap_event *mmap_event)
Signature · 1 line
2.19.1