Skip to contentSkip to conversation

memory: brcmstb: dpfe: introduce DPFE API v3

PATCH Applied Markus Mayer 2 participants 13 messages Apr 2, 2019 – Apr 17, 2019

Subsystems (3)
lore
Share & tools
lore
#3 lore raw

PATCH 2/6 memory: brcmstb: dpfe: report firmware loading error

In reply to Markus Mayer

From: Markus Mayer <[email protected]>

Print an error message if the DCPU firmware couldn't be downloaded.

---
 drivers/memory/brcmstb_dpfe.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/memory/brcmstb_dpfe.c +3 -1
index f143e40e528b..c67774a4fe8b 100644
@@ -703,8 +703,10 @@ static int brcmstb_dpfe_probe(struct platform_device *pdev)
 	}
 
 	ret = brcmstb_dpfe_download_firmware(pdev, &init);
-	if (ret)
+	if (ret) {
+		dev_err(dev, "Couldn't download firmware -- %d\n", ret);
 		return ret;
+	}
 
 	ret = sysfs_create_groups(&pdev->dev.kobj, dpfe_groups);
 	if (!ret)
Signature · 1 line
2.17.1
#5 lore raw

PATCH 3/6 memory: brcmstb: dpfe: wait for DCPU to be ready

In reply to Markus Mayer

From: Markus Mayer <[email protected]>

We wait for the DCPU to be ready before sending a command.

---
 drivers/memory/brcmstb_dpfe.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
drivers/memory/brcmstb_dpfe.c +12 -0
index c67774a4fe8b..f8d05a8266c3 100644
@@ -304,6 +304,18 @@ static int __send_command(struct private_data *priv, unsigned int cmd,
 
 	mutex_lock(&priv->lock);
 
+	/* Wait for DCPU to become ready */
+	for (i = 0; i < DELAY_LOOP_MAX; i++) {
+		resp = readl_relaxed(regs + REG_TO_HOST_MBOX);
+		if (resp == 0)
+			break;
+		msleep(1);
+	}
+	if (resp != 0) {
+		mutex_unlock(&priv->lock);
+		return -ETIMEDOUT;
+	}
+
 	/* Write command and arguments to message area */
 	for (i = 0; i < MSG_FIELD_MAX; i++)
 		writel_relaxed(msg[i], regs + DCPU_MSG_RAM(i));
Signature · 1 line
2.17.1
#11 lore raw

PATCH 6/6 memory: brcmstb: dpfe: introduce DPFE API v3

In reply to Markus Mayer

From: Markus Mayer <[email protected]>

Introduce code to handle DPFE API v3. We also change the driver to default to v3 by default and use API v2 only for select chips.

---
 drivers/memory/brcmstb_dpfe.c | 114 +++++++++++++++++++++++++++++++---
 1 file changed, 105 insertions(+), 9 deletions(-)
drivers/memory/brcmstb_dpfe.c +105 -9
index 43a53246abb3..bc6bf263c859 100644
@@ -76,7 +76,7 @@
 #define DRAM_MR4_TH_OFFS_MASK	0x3
 #define DRAM_MR4_TUF_MASK	0x1
 
-/* DRAM Vendor Offsets & Masks */
+/* DRAM Vendor Offsets & Masks (API v2) */
 #define DRAM_VENDOR_MR5		0x0
 #define DRAM_VENDOR_MR6		0x4
 #define DRAM_VENDOR_MR7		0x8
@@ -85,6 +85,15 @@
 #define DRAM_VENDOR_MASK	0xff
 #define DRAM_VENDOR_SHIFT	24	/* We need to look at byte 3 */
 
+/* DRAM Information Offsets & Masks (API v3) */
+#define DRAM_DDR_INFO_MR4	0x0
+#define DRAM_DDR_INFO_MR5	0x4
+#define DRAM_DDR_INFO_MR6	0x8
+#define DRAM_DDR_INFO_MR7	0xc
+#define DRAM_DDR_INFO_MR8	0x10
+#define DRAM_DDR_INFO_ERROR	0x14
+#define DRAM_DDR_INFO_MASK	0xff
+
 /* Reset register bits & masks */
 #define DCPU_RESET_SHIFT	0x0
 #define DCPU_RESET_MASK		0x1
@@ -121,7 +130,7 @@ enum dpfe_msg_fields {
 	MSG_ARG_COUNT,
 	MSG_ARG0,
 	MSG_CHKSUM,
-	MSG_FIELD_MAX /* Last entry */
+	MSG_FIELD_MAX	= 16 /* Max number of arguments */
 };
 
 enum dpfe_commands {
@@ -196,6 +205,7 @@ static ssize_t show_refresh(struct device *, struct device_attribute *, char *);
 static ssize_t store_refresh(struct device *, struct device_attribute *,
 			  const char *, size_t);
 static ssize_t show_vendor(struct device *, struct device_attribute *, char *);
+static ssize_t show_dram(struct device *, struct device_attribute *, char *);
 
 /*
  * Declare our attributes early, so they can be referenced in the API data
@@ -205,6 +215,7 @@ static ssize_t show_vendor(struct device *, struct device_attribute *, char *);
 static DEVICE_ATTR(dpfe_info, 0444, show_info, NULL);
 static DEVICE_ATTR(dpfe_refresh, 0644, show_refresh, store_refresh);
 static DEVICE_ATTR(dpfe_vendor, 0444, show_vendor, NULL);
+static DEVICE_ATTR(dpfe_dram, 0444, show_dram, NULL);
 
 /* API v2 sysfs attributes */
 static struct attribute *dpfe_v2_attrs[] = {
@@ -215,6 +226,14 @@ static struct attribute *dpfe_v2_attrs[] = {
 };
 ATTRIBUTE_GROUPS(dpfe_v2);
 
+/* API v3 sysfs attributes */
+static struct attribute *dpfe_v3_attrs[] = {
+	&dev_attr_dpfe_info.attr,
+	&dev_attr_dpfe_dram.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(dpfe_v3);
+
 /* API v2 firmware commands */
 static const struct dpfe_api dpfe_api_v2 = {
 	.version = 2,
@@ -245,6 +264,34 @@ static const struct dpfe_api dpfe_api_v2 = {
 	}
 };
 
+/* API v3 firmware commands */
+static const struct dpfe_api dpfe_api_v3 = {
+	.version = 3,
+	.fw_name = NULL, /* We expect the firmware to have been downloaded! */
+	.sysfs_attrs = dpfe_v3_groups,
+	.command = {
+		[DPFE_CMD_GET_INFO] = {
+			[MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
+			[MSG_COMMAND] = 0x0101,
+			[MSG_ARG_COUNT] = 1,
+			[MSG_ARG0] = 1,
+			[MSG_CHKSUM] = 0x104,
+		},
+		[DPFE_CMD_GET_REFRESH] = {
+			[MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
+			[MSG_COMMAND] = 0x0202,
+			[MSG_ARG_COUNT] = 0,
+			/*
+			 * This is a bit ugly. Without arguments, the checksum
+			 * follows right after the argument count and not at
+			 * offset MSG_CHKSUM.
+			 */
+			[MSG_ARG0] = 0x203,
+		},
+		/* There's no GET_VENDOR command in API v3. */
+	},
+};
+
 static bool is_dcpu_enabled(void __iomem *regs)
 {
 	u32 val;
@@ -286,13 +333,13 @@ static void __enable_dcpu(void __iomem *regs)
 	writel_relaxed(val, regs + REG_DCPU_RESET);
 }
 
-static unsigned int get_msg_chksum(const u32 msg[])
+static unsigned int get_msg_chksum(const u32 msg[], unsigned int max)
 {
 	unsigned int sum = 0;
 	unsigned int i;
 
 	/* Don't include the last field in the checksum. */
-	for (i = 0; i < MSG_FIELD_MAX - 1; i++)
+	for (i = 0; i < max; i++)
 		sum += msg[i];
 
 	return sum;
@@ -305,6 +352,11 @@ static void __iomem *get_msg_ptr(struct private_data *priv, u32 response,
 	unsigned int offset;
 	void __iomem *ptr = NULL;
 
+	/* There is no need to use this function for API v3 or later. */
+	if (unlikely(priv->dpfe_api->version >= 3)) {
+		return NULL;
+	}
+
 	msg_type = (response >> DRAM_MSG_TYPE_OFFSET) & DRAM_MSG_TYPE_MASK;
 	offset = (response >> DRAM_MSG_ADDR_OFFSET) & DRAM_MSG_ADDR_MASK;
 
@@ -332,12 +384,25 @@ static void __iomem *get_msg_ptr(struct private_data *priv, u32 response,
 	return ptr;
 }
 
+static void __finalize_command(struct private_data *priv)
+{
+	unsigned int release_mbox;
+
+	/*
+	 * It depends on the API version which MBOX register we have to write to
+	 * to signal we are done.
+	 */
+	release_mbox = (priv->dpfe_api->version < 3)
+			? REG_TO_HOST_MBOX : REG_TO_DCPU_MBOX;
+	writel_relaxed(0, priv->regs + release_mbox);
+}
+
 static int __send_command(struct private_data *priv, unsigned int cmd,
 			  u32 result[])
 {
 	const u32 *msg = priv->dpfe_api->command[cmd];
 	void __iomem *regs = priv->regs;
-	unsigned int i, chksum;
+	unsigned int i, chksum, chksum_idx;
 	int ret = 0;
 	u32 resp;
 
@@ -381,10 +446,11 @@ static int __send_command(struct private_data *priv, unsigned int cmd,
 		/* Read response data */
 		for (i = 0; i < MSG_FIELD_MAX; i++)
 			result[i] = readl_relaxed(regs + DCPU_MSG_RAM(i));
+		chksum_idx = result[MSG_ARG_COUNT] + MSG_ARG_COUNT + 1;
 	}
 
 	/* Tell DCPU we are done */
-	writel_relaxed(0, regs + REG_TO_HOST_MBOX);
+	__finalize_command(priv);
 
 	mutex_unlock(&priv->lock);
 
@@ -392,8 +458,8 @@ static int __send_command(struct private_data *priv, unsigned int cmd,
 		return ret;
 
 	/* Verify response */
-	chksum = get_msg_chksum(result);
-	if (chksum != result[MSG_CHKSUM])
+	chksum = get_msg_chksum(result, chksum_idx);
+	if (chksum != result[chksum_idx])
 		resp = DCPU_RET_ERR_CHKSUM;
 
 	if (resp != DCPU_RET_SUCCESS) {
@@ -710,6 +776,30 @@ static ssize_t show_vendor(struct device *dev, struct device_attribute *devattr,
 	return sprintf(buf, "%#x %#x %#x %#x %#x\n", mr5, mr6, mr7, mr8, err);
 }
 
+static ssize_t show_dram(struct device *dev, struct device_attribute *devattr,
+			 char *buf)
+{
+	u32 response[MSG_FIELD_MAX];
+	struct private_data *priv;
+	ssize_t ret;
+	u32 mr4, mr5, mr6, mr7, mr8, err;
+
+	priv = dev_get_drvdata(dev);
+	ret = generic_show(DPFE_CMD_GET_REFRESH, response, priv, buf);
+	if (ret)
+		return ret;
+
+	mr4 = response[MSG_ARG0 + 0] & DRAM_INFO_MR4_MASK;
+	mr5 = response[MSG_ARG0 + 1] & DRAM_DDR_INFO_MASK;
+	mr6 = response[MSG_ARG0 + 2] & DRAM_DDR_INFO_MASK;
+	mr7 = response[MSG_ARG0 + 3] & DRAM_DDR_INFO_MASK;
+	mr8 = response[MSG_ARG0 + 4] & DRAM_DDR_INFO_MASK;
+	err = response[MSG_ARG0 + 5] & DRAM_DDR_INFO_MASK;
+
+	return sprintf(buf, "%#x %#x %#x %#x %#x %#x\n", mr4, mr5, mr6, mr7,
+			mr8, err);
+}
+
 static int brcmstb_dpfe_resume(struct platform_device *pdev)
 {
 	struct init_data init;
@@ -787,7 +877,13 @@ static int brcmstb_dpfe_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id brcmstb_dpfe_of_match[] = {
-	{ .compatible = "brcm,dpfe-cpu", .data = &dpfe_api_v2 },
+	/* Use legacy API v2 for a select number of chips */
+	{ .compatible = "brcm,bcm7268-dpfe-cpu", .data = &dpfe_api_v2 },
+	{ .compatible = "brcm,bcm7271-dpfe-cpu", .data = &dpfe_api_v2 },
+	{ .compatible = "brcm,bcm7278-dpfe-cpu", .data = &dpfe_api_v2 },
+	{ .compatible = "brcm,bcm7211-dpfe-cpu", .data = &dpfe_api_v2 },
+	/* API v3 is the default going forward */
+	{ .compatible = "brcm,dpfe-cpu", .data = &dpfe_api_v3 },
 	{}
 };
 MODULE_DEVICE_TABLE(of, brcmstb_dpfe_of_match);
Signature · 1 line
2.17.1
#0 lore raw

cover memory: brcmstb: dpfe: introduce DPFE API v3

From: Markus Mayer <[email protected]>

This series introduces a new API for communicating with the DCPU. It will be used as the default going forward.

Before adding the new API, there is also some code cleanup and hardening.

This series is based on drivers/next of
https://github.com/Broadcom/stblinux.git, since it builds on top of recently upstreamed changes that are present in this branch.

Markus Mayer (6):
memory: brcmstb: dpfe: remove unused code and fix formatting
memory: brcmstb: dpfe: report firmware loading error
memory: brcmstb: dpfe: wait for DCPU to be ready
memory: brcmstb: dpfe: prepare support for multiple API versions
memory: brcmstb: dpfe: prepare for API-dependent sysfs attributes
memory: brcmstb: dpfe: introduce DPFE API v3

 drivers/memory/brcmstb_dpfe.c | 273 ++++++++++++++++++++++++++--------
 1 file changed, 213 insertions(+), 60 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/6 memory: brcmstb: dpfe: remove unused code and fix formatting

From: Markus Mayer <[email protected]>

Remove an unused struct and fix source code formatting in a few areas.

---
 drivers/memory/brcmstb_dpfe.c | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)
drivers/memory/brcmstb_dpfe.c +2 -11
index fae3ac3d65c6..f143e40e528b 100644
@@ -131,14 +131,6 @@ enum dpfe_commands {
 	DPFE_CMD_MAX /* Last entry */
 };
 
-struct dpfe_msg {
-	u32 header;
-	u32 command;
-	u32 arg_count;
-	u32 arg0;
-	u32 chksum; /* This is the sum of all other entries. */
-};
-
 /*
  * Format of the binary firmware file:
  *
@@ -585,7 +577,7 @@ static ssize_t show_refresh(struct device *dev,
 		return ret;
 
 	mr4 = (readl_relaxed(info + DRAM_INFO_MR4) >> DRAM_INFO_MR4_SHIFT) &
-	      DRAM_INFO_MR4_MASK;
+	       DRAM_INFO_MR4_MASK;
 
 	refresh = (mr4 >> DRAM_MR4_REFRESH) & DRAM_MR4_REFRESH_MASK;
 	sr_abort = (mr4 >> DRAM_MR4_SR_ABORT) & DRAM_MR4_SR_ABORT_MASK;
@@ -612,7 +604,6 @@ static ssize_t store_refresh(struct device *dev, struct device_attribute *attr,
 		return -EINVAL;
 
 	priv = dev_get_drvdata(dev);
-
 	ret = __send_command(priv, DPFE_CMD_GET_REFRESH, response);
 	if (ret)
 		return ret;
@@ -627,7 +618,7 @@ static ssize_t store_refresh(struct device *dev, struct device_attribute *attr,
 }
 
 static ssize_t show_vendor(struct device *dev, struct device_attribute *devattr,
-			 char *buf)
+			   char *buf)
 {
 	u32 response[MSG_FIELD_MAX];
 	struct private_data *priv;
Signature · 1 line
2.17.1
#7 lore raw

PATCH 4/6 memory: brcmstb: dpfe: prepare support for multiple API versions

In reply to Markus Mayer

From: Markus Mayer <[email protected]>

Extend the driver, so it can handle different API versions for interacting with the DCPU. This is in preparation for the upcoming API v3.

---
 drivers/memory/brcmstb_dpfe.c | 87 ++++++++++++++++++++++++-----------
 1 file changed, 59 insertions(+), 28 deletions(-)
drivers/memory/brcmstb_dpfe.c +59 -28
index f8d05a8266c3..9ad5ea08c134 100644
@@ -35,10 +35,10 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 
 #define DRVNAME			"brcmstb-dpfe"
-#define FIRMWARE_NAME		"dpfe.bin"
 
 /* DCPU register offsets */
 #define REG_DCPU_RESET		0x0
@@ -164,12 +164,20 @@ struct init_data {
 	bool is_big_endian;
 };
 
+/* API version and corresponding commands */
+struct dpfe_api {
+	int version;
+	const char *fw_name;
+	u32 command[DPFE_CMD_MAX][MSG_FIELD_MAX];
+};
+
 /* Things we need for as long as we are active. */
 struct private_data {
 	void __iomem *regs;
 	void __iomem *dmem;
 	void __iomem *imem;
 	struct device *dev;
+	const struct dpfe_api *dpfe_api;
 	struct mutex lock;
 };
 
@@ -178,29 +186,33 @@ static const char *error_text[] = {
 	"Incorrect checksum", "Malformed command", "Timed out",
 };
 
-/* List of supported firmware commands */
-static const u32 dpfe_commands[DPFE_CMD_MAX][MSG_FIELD_MAX] = {
-	[DPFE_CMD_GET_INFO] = {
-		[MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
-		[MSG_COMMAND] = 1,
-		[MSG_ARG_COUNT] = 1,
-		[MSG_ARG0] = 1,
-		[MSG_CHKSUM] = 4,
-	},
-	[DPFE_CMD_GET_REFRESH] = {
-		[MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
-		[MSG_COMMAND] = 2,
-		[MSG_ARG_COUNT] = 1,
-		[MSG_ARG0] = 1,
-		[MSG_CHKSUM] = 5,
-	},
-	[DPFE_CMD_GET_VENDOR] = {
-		[MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
-		[MSG_COMMAND] = 2,
-		[MSG_ARG_COUNT] = 1,
-		[MSG_ARG0] = 2,
-		[MSG_CHKSUM] = 6,
-	},
+/* API v2 firmware commands */
+static const struct dpfe_api dpfe_api_v2 = {
+	.version = 2,
+	.fw_name = "dpfe.bin",
+	.command = {
+		[DPFE_CMD_GET_INFO] = {
+			[MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
+			[MSG_COMMAND] = 1,
+			[MSG_ARG_COUNT] = 1,
+			[MSG_ARG0] = 1,
+			[MSG_CHKSUM] = 4,
+		},
+		[DPFE_CMD_GET_REFRESH] = {
+			[MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
+			[MSG_COMMAND] = 2,
+			[MSG_ARG_COUNT] = 1,
+			[MSG_ARG0] = 1,
+			[MSG_CHKSUM] = 5,
+		},
+		[DPFE_CMD_GET_VENDOR] = {
+			[MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
+			[MSG_COMMAND] = 2,
+			[MSG_ARG_COUNT] = 1,
+			[MSG_ARG0] = 2,
+			[MSG_CHKSUM] = 6,
+		},
+	}
 };
 
 static bool is_dcpu_enabled(void __iomem *regs)
@@ -293,7 +305,7 @@ static void __iomem *get_msg_ptr(struct private_data *priv, u32 response,
 static int __send_command(struct private_data *priv, unsigned int cmd,
 			  u32 result[])
 {
-	const u32 *msg = dpfe_commands[cmd];
+	const u32 *msg = priv->dpfe_api->command[cmd];
 	void __iomem *regs = priv->regs;
 	unsigned int i, chksum;
 	int ret = 0;
@@ -492,7 +504,15 @@ static int brcmstb_dpfe_download_firmware(struct platform_device *pdev,
 			return 0;
 	}
 
-	ret = request_firmware(&fw, FIRMWARE_NAME, dev);
+	/*
+	 * If the firmware filename is NULL it means the boot firmware has to
+	 * download the DCPU firmware for us. If that didn't work, we have to
+	 * bail, since downloading it ourselves wouldn't work either.
+	 */
+	if (!priv->dpfe_api->fw_name)
+		return -ENODEV;
+
+	ret = request_firmware(&fw, priv->dpfe_api->fw_name, dev);
 	/* request_firmware() prints its own error messages. */
 	if (ret)
 		return ret;
@@ -714,6 +734,16 @@ static int brcmstb_dpfe_probe(struct platform_device *pdev)
 		return -ENOENT;
 	}
 
+	priv->dpfe_api = of_device_get_match_data(dev);
+	if (unlikely(!priv->dpfe_api)) {
+		/*
+		 * It should be impossible to end up here, but to be safe we
+		 * check anyway.
+		 */
+		dev_err(dev, "Couldn't determine API\n");
+		return -ENOENT;
+	}
+
 	ret = brcmstb_dpfe_download_firmware(pdev, &init);
 	if (ret) {
 		dev_err(dev, "Couldn't download firmware -- %d\n", ret);
@@ -722,7 +752,8 @@ static int brcmstb_dpfe_probe(struct platform_device *pdev)
 
 	ret = sysfs_create_groups(&pdev->dev.kobj, dpfe_groups);
 	if (!ret)
-		dev_info(dev, "registered.\n");
+		dev_info(dev, "registered with API v%d.\n",
+			 priv->dpfe_api->version);
 
 	return ret;
 }
@@ -735,7 +766,7 @@ static int brcmstb_dpfe_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id brcmstb_dpfe_of_match[] = {
-	{ .compatible = "brcm,dpfe-cpu", },
+	{ .compatible = "brcm,dpfe-cpu", .data = &dpfe_api_v2 },
 	{}
 };
 MODULE_DEVICE_TABLE(of, brcmstb_dpfe_of_match);
Signature · 1 line
2.17.1
#9 lore raw

PATCH 5/6 memory: brcmstb: dpfe: prepare for API-dependent sysfs attributes

In reply to Markus Mayer

From: Markus Mayer <[email protected]>

Prepare the driver so that sysfs attributes can differ based on the API version.

---
 drivers/memory/brcmstb_dpfe.c | 47 +++++++++++++++++++++++++----------
 1 file changed, 34 insertions(+), 13 deletions(-)
drivers/memory/brcmstb_dpfe.c +34 -13
index 9ad5ea08c134..43a53246abb3 100644
@@ -168,6 +168,7 @@ struct init_data {
 struct dpfe_api {
 	int version;
 	const char *fw_name;
+	const struct attribute_group **sysfs_attrs;
 	u32 command[DPFE_CMD_MAX][MSG_FIELD_MAX];
 };
 
@@ -186,10 +187,39 @@ static const char *error_text[] = {
 	"Incorrect checksum", "Malformed command", "Timed out",
 };
 
+/*
+ * Forward declaration of our sysfs attribute functions, so we can declare the
+ * attribute data structures early.
+ */
+static ssize_t show_info(struct device *, struct device_attribute *, char *);
+static ssize_t show_refresh(struct device *, struct device_attribute *, char *);
+static ssize_t store_refresh(struct device *, struct device_attribute *,
+			  const char *, size_t);
+static ssize_t show_vendor(struct device *, struct device_attribute *, char *);
+
+/*
+ * Declare our attributes early, so they can be referenced in the API data
+ * structure. We need to do this, because the attributes depend on the API
+ * version.
+ */
+static DEVICE_ATTR(dpfe_info, 0444, show_info, NULL);
+static DEVICE_ATTR(dpfe_refresh, 0644, show_refresh, store_refresh);
+static DEVICE_ATTR(dpfe_vendor, 0444, show_vendor, NULL);
+
+/* API v2 sysfs attributes */
+static struct attribute *dpfe_v2_attrs[] = {
+	&dev_attr_dpfe_info.attr,
+	&dev_attr_dpfe_refresh.attr,
+	&dev_attr_dpfe_vendor.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(dpfe_v2);
+
 /* API v2 firmware commands */
 static const struct dpfe_api dpfe_api_v2 = {
 	.version = 2,
 	.fw_name = "dpfe.bin",
+	.sysfs_attrs = dpfe_v2_groups,
 	.command = {
 		[DPFE_CMD_GET_INFO] = {
 			[MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
@@ -687,17 +717,6 @@ static int brcmstb_dpfe_resume(struct platform_device *pdev)
 	return brcmstb_dpfe_download_firmware(pdev, &init);
 }
 
-static DEVICE_ATTR(dpfe_info, 0444, show_info, NULL);
-static DEVICE_ATTR(dpfe_refresh, 0644, show_refresh, store_refresh);
-static DEVICE_ATTR(dpfe_vendor, 0444, show_vendor, NULL);
-static struct attribute *dpfe_attrs[] = {
-	&dev_attr_dpfe_info.attr,
-	&dev_attr_dpfe_refresh.attr,
-	&dev_attr_dpfe_vendor.attr,
-	NULL
-};
-ATTRIBUTE_GROUPS(dpfe);
-
 static int brcmstb_dpfe_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -750,7 +769,7 @@ static int brcmstb_dpfe_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = sysfs_create_groups(&pdev->dev.kobj, dpfe_groups);
+	ret = sysfs_create_groups(&pdev->dev.kobj, priv->dpfe_api->sysfs_attrs);
 	if (!ret)
 		dev_info(dev, "registered with API v%d.\n",
 			 priv->dpfe_api->version);
@@ -760,7 +779,9 @@ static int brcmstb_dpfe_probe(struct platform_device *pdev)
 
 static int brcmstb_dpfe_remove(struct platform_device *pdev)
 {
-	sysfs_remove_groups(&pdev->dev.kobj, dpfe_groups);
+	struct private_data *priv = dev_get_drvdata(&pdev->dev);
+
+	sysfs_remove_groups(&pdev->dev.kobj, priv->dpfe_api->sysfs_attrs);
 
 	return 0;
 }
Signature · 1 line
2.17.1