Skip to contentSkip to conversation

board: pm9g45: Migrate to CONFIG_DM

PATCH New Ilko Iliev 2 participants 2 messages Apr 3, 2019 – Apr 4, 2019 Arm (32-bit)

lore
Share & tools
lore

Ilko Iliev

author
#0 lore raw

PATCH v2 1/1 board: pm9g45: Migrate to CONFIG_DM

Migrate the following options to CONFIG_DM:
CONFIG_DM_GPIO
CONFIG_DM_MMC
CONFIG_DM_ETH
CONFIG_DM_SERIAL
CONFIG_DM_USB

---
Changes for v2:
- fix undeclared 'PHYS_SDRAM' in pm9g45.c
- add missing .dtb

 arch/arm/dts/Makefile         |   2 +
 board/ronetix/pm9g45/pm9g45.c |  10 +-
 configs/pm9g45_defconfig      |  44 +++++++--
 include/configs/pm9g45.h      | 173 ++++++++++++++++++----------------
 4 files changed, 135 insertions(+), 94 deletions(-)
arch/arm/dts/Makefile +2 -0
index 0e2ffdb87f..e148e96455 100644
@@ -598,6 +598,8 @@ dtb-$(CONFIG_TARGET_AT91SAM9260EK) += \
 
 dtb-$(CONFIG_TARGET_AT91SAM9M10G45EK) += at91sam9m10g45ek.dtb
 
+dtb-$(CONFIG_TARGET_PM9G45) += at91sam9m10g45ek.dtb
+
 dtb-$(CONFIG_TARGET_AT91SAM9X5EK) += \
 	at91sam9g15ek.dtb	\
 	at91sam9g25ek.dtb	\
board/ronetix/pm9g45/pm9g45.c +5 -5
index 17e520a9e9..c5d28c61e2 100644
@@ -124,7 +124,7 @@ int board_init(void)
 	/* arch number of AT91SAM9M10G45EK-Board */
 	gd->bd->bi_arch_number = MACH_TYPE_PM9G45;
 	/* adress of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
 
 #ifdef CONFIG_CMD_NAND
 	pm9g45_nand_hw_init();
@@ -139,15 +139,15 @@ int board_init(void)
 int dram_init(void)
 {
 	/* dram_init must store complete ramsize in gd->ram_size */
-	gd->ram_size = get_ram_size((void *)PHYS_SDRAM,
-				PHYS_SDRAM_SIZE);
+	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+				    CONFIG_SYS_SDRAM_SIZE);
 	return 0;
 }
 
 int dram_init_banksize(void)
 {
-	gd->bd->bi_dram[0].start = PHYS_SDRAM;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].size = CONFIG_SYS_SDRAM_SIZE;
 
 	return 0;
 }
configs/pm9g45_defconfig +37 -7

64 lines not on this page · raw message

include/configs/pm9g45.h +91 -82

201 lines not on this page · raw message

Signature · 1 line
2.17.1