Skip to contentSkip to conversation

vfio-ccw: Release any channel program when releasing/removing vfio-ccw mdev

RFC Farhan Ali 1 participant 1 message Apr 4, 2019 1 message not in the archive s390

lore
Share & tools
lore

Farhan Ali

author
#1 lore raw
In reply to a message not in the archive
Quoted 119 lines · Cornelia Huck
Quoted 116 lines · On Wed, 3 Apr 2019 11:17:00 -0400 Farhan Ali <[email protected]> wrote:
Quoted 65 lines · Cornelia Huck
Quoted 62 lines · On Tue, 2 Apr 2019 12:44:35 -0400 Farhan Ali <[email protected]> wrote:

When releasing the vfio-ccw mdev, we currently do not release any existing channel program and it's pinned pages. This can lead to the following warning:

[1038876.561565] WARNING: CPU: 2 PID: 144727 at drivers/vfio/vfio_iommu_type1.c:1494 vfio_sanity_check_pfn_list+0x40/0x70 [vfio_iommu_type1]

....

1038876.561921] Call Trace:

[1038876.561935] ([<00000009897fb870>] 0x9897fb870)
[1038876.561949]  [<000003ff8013bf62>] vfio_iommu_type1_detach_group+0xda/0x2f0 [vfio_iommu_type1]
[1038876.561965]  [<000003ff8007b634>] __vfio_group_unset_container+0x64/0x190 [vfio]
[1038876.561978]  [<000003ff8007b87e>] vfio_group_put_external_user+0x26/0x38 [vfio]
[1038876.562024]  [<000003ff806fc608>] kvm_vfio_group_put_external_user+0x40/0x60 [kvm]
[1038876.562045]  [<000003ff806fcb9e>] kvm_vfio_destroy+0x5e/0xd0 [kvm]
[1038876.562065]  [<000003ff806f63fc>] kvm_put_kvm+0x2a4/0x3d0 [kvm]
[1038876.562083]  [<000003ff806f655e>] kvm_vm_release+0x36/0x48 [kvm]
[1038876.562098]  [<00000000003c2dc4>] __fput+0x144/0x228
[1038876.562113]  [<000000000016ee82>] task_work_run+0x8a/0xd8
[1038876.562125]  [<000000000014c7a8>] do_exit+0x5d8/0xd90
[1038876.562140]  [<000000000014d084>] do_group_exit+0xc4/0xc8
[1038876.562155]  [<000000000015c046>] get_signal+0x9ae/0xa68
[1038876.562169]  [<0000000000108d66>] do_signal+0x66/0x768
[1038876.562185]  [<0000000000b9e37e>] system_call+0x1ea/0x2d8
[1038876.562195] 2 locks held by qemu-system-s39/144727:
[1038876.562205]  #0: 00000000537abaf9 (&container->group_lock){++++}, at: __vfio_group_unset_container+0x3c/0x190 [vfio]
[1038876.562230]  #1: 00000000670008b5 (&iommu->lock){+.+.}, at: vfio_iommu_type1_detach_group+0x36/0x2f0 [vfio_iommu_type1]
[1038876.562250] Last Breaking-Event-Address:
[1038876.562262]  [<000003ff8013aa24>] vfio_sanity_check_pfn_list+0x3c/0x70 [vfio_iommu_type1]
[1038876.562272] irq event stamp: 4236481
[1038876.562287] hardirqs last  enabled at (4236489): [<00000000001cee7a>] console_unlock+0x6d2/0x740
[1038876.562299] hardirqs last disabled at (4236496): [<00000000001ce87e>] console_unlock+0xd6/0x740
[1038876.562311] softirqs last  enabled at (4234162): [<0000000000b9fa1e>] __do_softirq+0x556/0x598
[1038876.562325] softirqs last disabled at (4234153): [<000000000014e4cc>] irq_exit+0xac/0x108
[1038876.562337] ---[ end trace 6c96d467b1c3ca06 ]---

Similarly we do not free the channel program when we are removing the vfio-ccw device. Let's fix this by resetting the device and freeing the channel program and pinned pages in both the release and remove path.

---
   drivers/s390/cio/vfio_ccw_ops.c | 9 +++++++++
   1 file changed, 9 insertions(+)
drivers/s390/cio/vfio_ccw_ops.c +1 -0
index ec2f796c..763c350 100644
@@ -138,6 +138,7 @@ static int vfio_ccw_mdev_remove(struct mdev_device *mdev)
   		/* The state will be NOT_OPER on error. */
   	}
 
+	cp_free(&private->cp);
   	private->mdev = NULL;
   	atomic_inc(&private->avail);
 
@@ -171,6 +172,14 @@ static void vfio_ccw_mdev_release(struct mdev_device *mdev)
   		dev_get_drvdata(mdev_parent_dev(mdev));
   	int i;
 
Quoted 11 lines

drivers/s390/cio/vfio_ccw_ops.c static void vfio_ccw_mdev_release(struct mdev_device *mdev) · line 180

Quoted 6 lines
drivers/s390/cio/vfio_ccw_ops.c +6 -0
+	if ((private->state != VFIO_CCW_STATE_NOT_OPER) &&
+	    (private->state != VFIO_CCW_STATE_STANDBY)) {
+		if (!vfio_ccw_mdev_reset(mdev))
+			private->state = VFIO_CCW_STATE_STANDBY;
+		/* The state will be NOT_OPER on error. */
+	}

Ok, now I have gotten lost in that maze of unregister, release, remove, and whatever functions. Does it even make sense here to do the disable/enable reset, or is disabling the subchannel the more sensible approach? Isn't the device going away anyway?

If it helps, we enter the release path when we either do a device hot unplug, or the guest dies, shuts down or I believe closes the mediated device file descriptor. For example a stacktrace for release would be something like this:

[  389.970906]  [<000003ff8033583e>] vfio_ccw_mdev_release+0x36/0xd0
[vfio_ccw]
[  389.970910]  [<000003ff8031e1d8>] vfio_mdev_release+0x38/0x58
[vfio_mdev]
[  389.970915]  [<000003ff80074832>] vfio_device_fops_release+0x3a/0x60
[vfio]
[  389.970919]  [<00000000003c2dc4>] __fput+0x144/0x228
[  389.970924]  [<000000000016ee82>] task_work_run+0x8a/0xd8
[  389.970928]  [<00000000001094ae>] do_notify_resume+0x46/0x88
[  389.970932]  [<0000000000b9e276>] system_call+0xe2/0x2d8

OTOH remove is called when we write to remove file for the mediated device and an example stacktrace would look like this:

[  285.190391]  [<000003ff802458b0>] vfio_ccw_mdev_remove+0x40/0x78
[vfio_ccw]
[  285.190397]  [<000003ff801a499c>] mdev_device_remove_ops+0x3c/0x80
[mdev]
[  285.190402]  [<000003ff801a4d5c>] mdev_device_remove+0xc4/0x130 [mdev]
[  285.190407]  [<000003ff801a5074>] remove_store+0x6c/0xa8 [mdev]
[  285.190412]  [<000000000046f494>] kernfs_fop_write+0x14c/0x1f8
[  285.190417]  [<00000000003c1530>] __vfs_write+0x38/0x1a8
[  285.190421]  [<00000000003c187c>] vfs_write+0xb4/0x198
[  285.190425]  [<00000000003c1af2>] ksys_write+0x5a/0xb0
[  285.190430]  [<0000000000b9e270>] system_call+0xdc/0x2d8

Now trying to answer your question, I think reseting the device on a release makes more sense. This is because the mediated device still exists but there is no user using the device.

Quoted 6 lines
Quoted 2 lines

On the remove case the mediated device is going away for good and so maybe just disabling the subchannel makes more sense in that case.

Thanks for the backtraces; and yes, I agree that reset on release and quiesce on remove look reasonable.

I will update and spin a v2 soon. I just want to wait and see if there are any other comments.

Quoted 16 lines
Quoted 14 lines

Thanks
Farhan

Quoted 8 lines
Quoted 6 lines
drivers/s390/cio/vfio_ccw_ops.c +2 -0
+
+	cp_free(&private->cp);
   	vfio_unregister_notifier(mdev_dev(mdev), VFIO_IOMMU_NOTIFY,
   				 &private->nb);