Skip to contentSkip to conversation

First round of new device support, cleanups and fixes for IIO in the 5.2 cycle.

GIT PULL Jonathan Cameron 2 participants 2 messages Apr 4, 2019 IIO

lore
Share & tools
lore

Jonathan Cameron

author maintainer
#0 lore raw

The following changes since commit b397f82585c3101dcf92642dd359891e66d00c55:

Merge 5.1-rc3 into staging-next (2019-04-01 07:49:24 +0200)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.2a-2

for you to fetch changes up to df1d80aee963480c5c2938c64ec0ac3e4a0df2e0:

iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertion (2019-04-04 20:21:15 +0100)

----------------------------------------------------------------
First set of new device support, features and fixes for IIO in the 5.2 cycle

Staging graduations
* ad7780
- Move this ADC driver out of staging. Included adding some new features along the way (see below). Also added DT bindings.

New device support
* adis16480
- Support the ADIS16495 and ADIS16497 IMU devices making
heavy use of refactoring of various aspects of the driver in precursor patches.
* lsm6dsx
- Support for the ASM330LHH 6-axis (accelerometer + gyro) sensor.
- Support for the LSM6DS0X
* matbotix mb1232
- New driver for this ultrasound ranging device family. Including bindings.
- Supports mb1202, mb1212, mb1222, mb1232, mb1242, mb7040 and mb7137.
* max31856
- New driver for this thermocouple temperature sensor.
* meson saradc
- Support the Meson-G12A (ID addition only).
* stmpe-adc
- New driver supporting generic ADC alongside touchscreen support which previously existed. Includes DT bindings.
* vcnl4000
- Support for the vcln4040 proximity and light sensor, including adding DT bindings for this and parts previously supported.

Features
* core
- Allow reading of mount matrices from ACPI in addition to DT.
- Common binding for theromcouple types.
* ad5933
- Add ABI docs as there are a few 'unsual' elements about this device - perhaps because it's our only impedance analyser.
* ad7780
- Add gain and filter gpio support + readback of current gain and filter.
* adis16480
- Allow selection fo the dataready pin to be used.
- Device tree ID table and binding documentation.
- Support external clock modes, including new bindings.
* bma180
- Mount matrix support.
* bmc150
- Mount matrix support.
* bmg160
- Mount matrix support.
- DT id table and bindings doc.
* bmp280
- Put calibration data into the entropy pool.
* hmc5843
- Mount matrix support.
* itg3200
- Mount matrix support.
* kxcjk1013
- Device tree id table, and binding docs.
* lpc32xx
- Add scale when regulator specified including DT docs for regulator.
* pms7003
- Add device IDs for all supported parts to driver and binding.
* stm32-dfsdm
- Enable hw consumer support, scan mode control and a complex set of triggered buffer modes.
- Power management.
* stm32-lptimer-counter
- power management.
- Document the pinctrl sleep state binding.
* ti-ads7950
- GPIO pin support.

Cleanups, minor fixes
* core
- Use bitmap_zalloc to make it explicit that is what we are doing.
- Tidy up all the Kconfig files (which had slowly gotten messy)
- Fix a forwards definition missing issue in iio/driver.h
* ad sigma delta core
- Improve handling of SPI bus locking vs CS assertion. This has been wrong a long time so not rushing this in.
* ad5064
- Mlock to local lock.
* ad5933 (staging cleanup)
- Multiline comment fixes.
- Include ordering.
- SPDX.
- Tidy up Kconfig help which was a bit missleading.
- Change some non standard attributes to ABI defined ones.
* ad7124
- White space fix.
* ad7192
- White space.
- Use DT clock binding.
- Improve error reporting.
- Platform data to DT conversion.
- Use read_avail callback, mostly to avoid the endless series of patches from new contributors trying to falsely put spaces around the negative sign.
* ad7280a
- Add brackets to macros to avoid potential precedence isseus.
- Add temp vars for event codes to reduce indent and improved readability.
- Clean out som CamelCase notation.
- White space.
* ad7606
- Fix broken file naming in MAINTAINERS.
* ad7780
- Missing switch defaults to supress warnings and harden the code slightly.
- Set pattern masks more directly.
- Add ID values and masks for all supported chips.
- SPDX + add Renato as a copyright holder as he has done a lot of work on this driver.
- Add brackets to macros to avoid potential precedence issues.
* ad7923
- White space fixes.
- Use BIT macro to improve readability.
- Add brackets to macros to avoid potential precedence issues.
- Tidy up a null comparisom.
* ad9523
- Fix a typo in naming of variables.
* adis16400
- Combine trigger file into main code as no advantage in separate files. Rename core file to just adis16400.
- Squash the header into the c file now there is only one file.
- Generalize burst mode to support new variants.
* ak8975
- Local variable to improve readability around mount matrix support.
* as3935
- Avoid potential race by ensuring remove does exact opposite of probe rather than a slightly different order.
* cross_ec
- Drop some unnecessary includes.
- Fix some warning and the slightly 'unusual' code.
- Add some docs for non obvious function.
- SPDX
* hmc5843
- Potential unhandled error case.
* iio trigger core
- Print an error if there is no available irq due to max consumers per trigger being set to low.
* iio loop trigger
- Drop an unlikely on IS_ERR as IS_ERR already has the annotation.
* ingenic-adc
- Drop a redundant dev_err call as devm_ioremap_resource reports the same internally.
* lmp91000
- Drop some unncessary parentheses and white space tidy up.
- Invert and if statement to improve readability.
- Fix a wrong error message.
* lpc32xx
- Header sorting + drop some unused ones.
* mma8542
- Mark a switch fallthrough.
* mpu6050
- Add a local variable to improve code readability around mount matrix support.
* mxs-lradc-adc
- Handle devm_iio_trigger_alloc failure.
* sps30
- Fix up a kernel version in the ABI docs.
* srf04
- DT binding doc converted to yaml.
* ssp_sensors
- Supress a clang build warning due to lack of visibility of conditional within a iio_push_to_buffers_with_timestamp. (reasonable false warning!)
* st_accel
- Drop pointless less than 0 comparisom of unsigned int.
* stm32-dfsdm
- Improve accuracy of spi_master_frequency calculation.
- Improve calculation fo sampling frequency.
- Rework various internals to simplify adding triggered buffer support.
- Claim direct mode to avoid racing around read_raw and being in buffered mode.
* stmpe
- Fix a clang false positive warning.
* ti-ads7950
- Use local lock rather than using the core mlock when not locking around the device mode.
* vcnl4000
- Use word writes instead of byte writes. It seems byte writes are fine for some parts (undocument) but not others that the driver will shortly support.

Other
* mailmap
- Add email address change for Sean Nyekjaer. Update in relevant drivers

----------------------------------------------------------------
Alexandru Ardelean (5):
iio: imu: adis16400: move trigger handler into adis16400_core
iio: imu: adis: generalize burst mode support
iio: imu: adis16400: move burst logic to ADIS lib
iio: imu: adis16400: rename adis16400_core.c -> adi16400.c
iio: imu: adis16400: move adis16400.h into adis16400.c

Anderson Reis (3):
iio:potentiostat:lmp91000: reduce line width and remove blank line iio:potentiostat:lmp91000: invert if statement iio:potentiostat:lmp91000: change dev_err message

Andreas Klinger (5):
dt-bindings: Add vendor prefix for MaxBotix
dt-bindings: maxbotix,mb1232: Add MaxBotix i2c ultrasonic rangers mb1232.c: add distance iio sensor with i2c
MAINTAINERS: add maintainer for maxbotix ultrasonic driver devantech-srf04.yaml: transform DT binding to YAML

Andy Shevchenko (3):
iio: Allow to read mount matrix from ACPI
iio: buffer: Switch to bitmap_zalloc()
iio: Make possible to include driver.h first

Angus Ainslie (Purism) (5):
iio: light: vcnl4000 use word writes instead of byte writes
iio: light: vcnl4000 add devicetree hooks
dt-bindings: iio: light: add vcnl4000 devicetree bindings
iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor
dt-bindings: iio: light: add vcnl4040 devicetree bindings

Bárbara Fernandes (4):
iio:adc:ad7923: Align broken line to parenthesis iio:adc:ad7923: Use BIT macro instead of bitshift iio:adc:ad7923: Put macro argument between ()'s iio:adc:ad7923: Rewrite comparison to NULL

Chengguang Xu (1):
iio: remove redundant unlikely annotation

Colin Ian King (2):
iio: st_accel: remove redundant unsigned less than zero check
iio: adc: ad7124 fix indentation issue, remove extra tab

Cristian Sicilia (4):
staging: iio: adc: ad7280a: Avoid precedence issues in macro
staging: iio: adc: ad7280a: Adding temp var to improve readability
staging: iio: adc: ad7280a: Remove CamelCase notation
staging: iio: adc: ad7280a: Tab alignment

Enric Balletbo i Serra (1):
iio: cros_ec: Switch to SPDX identifier.

Enrico Weigelt, metux IT consult (1):
drivers: iio: Kconfig: pedantic cleanup

Fabrice Gasnier (12):
dt-bindings: iio: stm32-lptimer-counter: document pinctrl sleep state
iio: counter: stm32-lptimer: Add power management support
iio: adc: stm32-dfsdm: make spi_master_freq more accurate
iio: adc: stm32-dfsdm: continuous mode depends on current mode
iio: adc: stm32-dfsdm: move dma enable from start_conv() to start_dma()
iio: adc: stm32-dfsdm: move dma slave config to start routine
iio: adc: stm32-dfsdm: enable hw consumer
iio: adc: stm32-dfsdm: add support for scan mode
iio: adc: stm32-dfsdm: add support for buffer modes
iio: adc: stm32-dfsdm: claim direct mode for raw read and settings
iio: adc: stm32-dfsdm: improve sampling frequency accuracy
iio: adc: stm32-dfsdm: add PM support

Gregory CLEMENT (4):
iio: adc: lpc32xx: Sort headers
iio: adc: lpc32xx: Cleanup headers
iio: adc: lpc32xx: Add scale feature
dt-bindings: iio: adc: lpc32xx-adc: Document vref-supply

Guenter Roeck (1):
iio: cros_ec: Drop unnecessary include files

Gustavo A. R. Silva (2):
iio: mma8452: mark expected switch fall-through
iio: cros_ec_accel_legacy: Refactor code in cros_ec_accel_legacy_probe

Gwendal Grignou (1):
iio: cros_ec: Add kernel-doc for cros_ec_sensors_read_lpc

H. Nikolaus Schaller (10):
iio: accel: bmc150: add mount matrix support
iio: accel: bma180: add mount matrix support
iio: gyro: bmg160: add mount matrix support
iio: gyro: itg3200: add mount matrix support
iio: magnetometer: bmc150: add mount matrix support
iio: magnetometer: hmc5843: add mount matrix support
iio: mpu6050: improve code readability
iio: ak8975: improve code readability
iio: gyro: bmg160: add device tree compatibility table
dt-bindings: iio: add Bosch BMG160 gyroscope sensor

Jonathan Cameron (1):
iio:dac:ad5064 mlock cleanup - move to a local lock.

Justin Chen (2):
iio: adc: ti-ads7950: Fix improper use of mlock
iio: adc: ti-ads7950: add GPIO support

Kangjie Lu (2):
iio: adc: fix a potential NULL pointer dereference
iio: hmc5843: fix potential NULL pointer dereferences

Lars-Peter Clausen (2):
iio: frequency: ad9523: Fix typo in ad9523_platform_data
iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertion

Linus Walleij (1):
iio: pressure: bmp280: BMP280 calibration to entropy

Lorenzo Bianconi (4):
iio: imu: st_lsm6dsx: add support to ASM330LHH
dt-bindings: iio: imu: st_lsm6dsx: add asm330lhh device bindings
iio: imu: st_lsm6dsx: add support to LSM6DSOX
dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsox device bindings

Lucas Oshiro (1):
iio:potentiostat:lmp91000: remove unnecessary parentheses

Marcelo Schmitt (6):
staging: iio: ad5933: change multi-line comment style
staging: iio: ad5933: organize includes
staging: iio: ad5933: add SPDX identifier
staging: iio: ad5933: change help rule message
staging: iio: ad5933: add ABI documentation
staging: iio: ad5933: change attributes to match ABI

Mathieu Othacehe (1):
iio: trigger: Print an error if there is no available irq

Mircea Caprioru (5):
staging: iio: adc: ad7192: Fix identation
staging: iio: adc: ad7192: Use DT clock binding
staging: iio: adc: ad7192: Report error directly in ad7192_setup
staging: iio: adc: ad7192: Convert platform data to DT properties
staging: iio: adc: ad7192: Use read_avail for available attributes

Nathan Chancellor (2):
iio: common: ssp_sensors: Initialize calculated_time in ssp_common_process_data
iio: adc: stmpe-adc: Shuffle an if statement around in stmpe_adc_isr

Neil Armstrong (2):
dt-bindings: iio: adc: document the Meson G12A support
iio: adc: meson-saradc: add support for Meson G12A

Paresh Chaudhary (2):
iio:temperature:max31856:Add device tree bind info iio:temperature: Add MAX31856 thermocouple support

Patrick Havelange (1):
dt-bindings: iio/temperature: Add thermocouple types (and doc)

Renato Lui Geh (11):
staging: iio: ad7780: add gain & filter gpio support
staging: iio: ad7780: add missing switch default case
staging: iio: ad7780: add gain reading to ad778x
staging: iio: ad7780: add filter reading to ad778x
staging: iio: ad7780: set pattern values and masks directly staging:iio:ad7780: add chip ID values and mask
staging: iio: ad7780: move regulator to after GPIO init
staging: iio: ad7780: add SPDX identifier
staging: iio: ad7780: add new copyright holder
staging: iio: ad7780: moving ad7780 out of staging
staging: iio: ad7780: add device tree binding

Robert Yang (3):
dt-bindings: Add vendor prefix for Kionix, Inc.
dt-bindings: iio: accel: kxcjk1013: Add device tree binding documentation
iio: accel: kxcjk1013: Add device tree support

Sean Nyekjaer (3):
mailmap: Update email for Sean Nyekjaer
iio: adc: ti-ads8688: Update the module author email address
iio: dac: ti-dac5571: Update the module author email address

Stefan Popa (10):
iio: imu: adis16480: Add support for configurable drdy indicator
iio: imu: adis16480: Add OF device ID table
iio: imu: adis16480: Treat temperature scale in a generic way
iio: imu: adis16480: Calculate the sampling frequency in a generic way
iio: imu: adis16480: Deal with filter freq in a generic way
iio: imu: adis16480: Add support for ADIS1649x family of devices
iio: imu: adis16480: Add docs for ADIS16480 IMU
iio: imu: adis16480: Add support for external clock
dt-bindings: iio: imu: adis16480: Document external clock
MAINTAINERS: Fix the link to ad7606 dt-bindings

Sven Van Asbroeck (1):
iio: proximity: as3935: fix use-after-free on device remove

Tomasz Duszynski (3):
iio: chemical: pms7003: extend supported sensors list
dt-bindings: iio: chemical: pms7003: extend supported sensors list
iio: chemical: sps30: fix attribute kernel version

Vladimir Petrigo (1):
iio: adc: ad7780: Add parentheses to macros

Wei Yongjun (1):
iio: adc: ingenic: remove redundant dev_err call in ingenic_adc_probe()

 .mailmap                                           |   1 +
 .../sysfs-bus-iio-impedance-analyzer-ad5933        |  19 +-
 Documentation/ABI/testing/sysfs-bus-iio-sps30      |   2 +-
 .../ABI/testing/sysfs-bus-iio-temperature-max31856 |  24 +
 .../bindings/iio/accel/kionix,kxcjk1013.txt        |  17 +
 .../devicetree/bindings/iio/adc/adi,ad7780.txt     |  48 ++
 .../bindings/iio/adc/amlogic,meson-saradc.txt      |   1 +
 .../devicetree/bindings/iio/adc/lpc32xx-adc.txt    |   5 +
 .../bindings/iio/chemical/plantower,pms7003.txt    |   8 +-
 .../bindings/iio/counter/stm32-lptimer-cnt.txt     |   8 +-
 .../devicetree/bindings/iio/gyroscope/bmg160.txt   |  20 +
 .../devicetree/bindings/iio/imu/adi,adis16480.txt  |  85 +++
 .../devicetree/bindings/iio/imu/st_lsm6dsx.txt     |   2 +
 .../devicetree/bindings/iio/light/vcnl4000.txt     |  24 +
 .../bindings/iio/proximity/devantech-srf04.txt     |  28 -
 .../bindings/iio/proximity/devantech-srf04.yaml    |  59 ++
 .../bindings/iio/proximity/maxbotix,mb1232.txt     |  29 +
 .../bindings/iio/temperature/max31856.txt          |  24 +
 .../iio/temperature/temperature-bindings.txt       |   7 +
 .../devicetree/bindings/vendor-prefixes.txt        |   2 +
 MAINTAINERS                                        |  10 +-
 drivers/iio/Kconfig                                |  24 +-
 drivers/iio/accel/Kconfig                          |  48 +-
 drivers/iio/accel/bma180.c                         |  18 +-
 drivers/iio/accel/bmc150-accel-core.c              |  21 +
 drivers/iio/accel/cros_ec_accel_legacy.c           |  40 +-
 drivers/iio/accel/kxcjk-1013.c                     |  10 +
 drivers/iio/accel/kxsd9.c                          |   4 +-
 drivers/iio/accel/mma8452.c                        |   2 +-
 drivers/iio/accel/st_accel_core.c                  |   2 +-
 drivers/iio/adc/Kconfig                            |  32 +-
 drivers/iio/adc/Makefile                           |   1 +
 drivers/iio/adc/ad7124.c                           |   2 +-
 drivers/{staging => }/iio/adc/ad7780.c             | 179 ++++--
 drivers/iio/adc/ad7923.c                           |  24 +-
 drivers/iio/adc/ad_sigma_delta.c                   |  16 +-
 drivers/iio/adc/ingenic-adc.c                      |   4 +-
 drivers/iio/adc/lpc32xx_adc.c                      |  60 +-
 drivers/iio/adc/meson_saradc.c                     |   8 +
 drivers/iio/adc/mxs-lradc-adc.c                    |   2 +
 drivers/iio/adc/stm32-dfsdm-adc.c                  | 628 ++++++++++++++++-----
 drivers/iio/adc/stm32-dfsdm-core.c                 | 180 +++++-
 drivers/iio/adc/stmpe-adc.c                        |   5 +-
 drivers/iio/adc/ti-ads7950.c                       | 219 ++++++-
 drivers/iio/adc/ti-ads8688.c                       |   2 +-
 drivers/iio/buffer/industrialio-buffer-cb.c        |  10 +-
 drivers/iio/chemical/Kconfig                       |  12 +-
 drivers/iio/chemical/pms7003.c                     |   5 +
 .../iio/common/cros_ec_sensors/cros_ec_sensors.c   |  12 +-
 .../common/cros_ec_sensors/cros_ec_sensors_core.c  |  22 +-
 drivers/iio/common/ms_sensors/Kconfig              |   2 +-
 drivers/iio/common/ssp_sensors/ssp_iio.c           |   2 +-
 drivers/iio/counter/stm32-lptimer-cnt.c            |  55 ++
 drivers/iio/dac/ad5064.c                           |  15 +-
 drivers/iio/dac/ti-dac5571.c                       |   2 +-
 drivers/iio/frequency/ad9523.c                     |  16 +-
 drivers/iio/gyro/bmg160_core.c                     |  21 +
 drivers/iio/gyro/bmg160_i2c.c                      |   9 +
 drivers/iio/gyro/itg3200_core.c                    |  20 +
 drivers/iio/gyro/mpu3050-core.c                    |   3 +-
 drivers/iio/humidity/Kconfig                       |  20 +-
 drivers/iio/imu/Makefile                           |   2 -
 drivers/iio/imu/{adis16400_core.c => adis16400.c}  | 232 +++++++-
 drivers/iio/imu/adis16400.h                        | 215 -------
 drivers/iio/imu/adis16400_buffer.c                 | 101 ----
 drivers/iio/imu/adis16480.c                        | 435 +++++++++++++-
 drivers/iio/imu/adis_buffer.c                      |  40 ++
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c         |  10 +-
 drivers/iio/imu/st_lsm6dsx/Kconfig                 |   2 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h            |   4 +
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c     |   8 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c       |  42 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c        |  10 +
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c        |  10 +
 drivers/iio/industrialio-buffer.c                  |  24 +-
 drivers/iio/industrialio-core.c                    |  46 +-
 drivers/iio/industrialio-trigger.c                 |   5 +-
 drivers/iio/light/Kconfig                          | 274 ++++-----
 drivers/iio/light/cros_ec_light_prox.c             |  12 +-
 drivers/iio/light/vcnl4000.c                       |  77 ++-
 drivers/iio/magnetometer/ak8974.c                  |   5 +-
 drivers/iio/magnetometer/ak8975.c                  |  13 +-
 drivers/iio/magnetometer/bmc150_magn.c             |  21 +
 drivers/iio/magnetometer/hmc5843.h                 |   1 +
 drivers/iio/magnetometer/hmc5843_core.c            |  20 +-
 drivers/iio/magnetometer/hmc5843_i2c.c             |   7 +-
 drivers/iio/magnetometer/hmc5843_spi.c             |   7 +-
 drivers/iio/potentiometer/Kconfig                  |  34 +-
 drivers/iio/potentiostat/lmp91000.c                |  14 +-
 drivers/iio/pressure/bmp280-core.c                 |   6 +
 drivers/iio/pressure/cros_ec_baro.c                |  11 +-
 drivers/iio/proximity/Kconfig                      |  12 +
 drivers/iio/proximity/Makefile                     |   1 +
 drivers/iio/proximity/as3935.c                     |  50 +-
 drivers/iio/proximity/mb1232.c                     | 272 +++++++++
 drivers/iio/temperature/Kconfig                    |  24 +-
 drivers/iio/temperature/Makefile                   |   1 +
 drivers/iio/temperature/max31856.c                 | 353 ++++++++++++
 drivers/iio/trigger/iio-trig-loop.c                |   2 +-
 drivers/staging/iio/adc/Kconfig                    |  13 -
 drivers/staging/iio/adc/Makefile                   |   1 -
 drivers/staging/iio/adc/ad7192.c                   | 233 +++++---
 drivers/staging/iio/adc/ad7192.h                   |   9 -
 drivers/staging/iio/adc/ad7280a.c                  | 109 ++--
 drivers/staging/iio/impedance-analyzer/Kconfig     |   2 +-
 drivers/staging/iio/impedance-analyzer/ad5933.c    |  54 +-
 include/dt-bindings/iio/temperature/thermocouple.h |  16 +
 include/linux/iio/adc/ad_sigma_delta.h             |   1 +
 include/linux/iio/driver.h                         |   1 +
 include/linux/iio/frequency/ad9523.h               |   8 +-
 include/linux/iio/gyro/itg3200.h                   |   1 +
 include/linux/iio/iio.h                            |   4 +-
 include/linux/iio/imu/adis.h                       |  14 +
 113 files changed, 3777 insertions(+), 1272 deletions(-)
 rename {drivers/staging/iio/Documentation => Documentation/ABI/testing}/sysfs-bus-iio-impedance-analyzer-ad5933 (56%)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856
 create mode 100644 Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt
 create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt
 create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt
 create mode 100644 Documentation/devicetree/bindings/iio/imu/adi,adis16480.txt
 create mode 100644 Documentation/devicetree/bindings/iio/light/vcnl4000.txt
 delete mode 100644 Documentation/devicetree/bindings/iio/proximity/devantech-srf04.txt
 create mode 100644 Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
 create mode 100644 Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.txt
 create mode 100644 Documentation/devicetree/bindings/iio/temperature/max31856.txt
 create mode 100644 Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt
 rename drivers/{staging => }/iio/adc/ad7780.c (63%)
 rename drivers/iio/imu/{adis16400_core.c => adis16400.c} (77%)
 delete mode 100644 drivers/iio/imu/adis16400.h
 delete mode 100644 drivers/iio/imu/adis16400_buffer.c
 create mode 100644 drivers/iio/proximity/mb1232.c
 create mode 100644 drivers/iio/temperature/max31856.c
 create mode 100644 include/dt-bindings/iio/temperature/thermocouple.h
#1 lore raw
Quoted 7 lines · Jonathan Cameron

The following changes since commit b397f82585c3101dcf92642dd359891e66d00c55:

Merge 5.1-rc3 into staging-next (2019-04-01 07:49:24 +0200)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.2a-2

Looks good, now pulled and pushed out.

greg k-h