configs: ls1046: Update mtd-id for QSPI nor in mtdparts variable
PATCH v4 1/1 configs: ls1046: Update mtd-id for QSPI nor in mtdparts variable
Update mtd-id for QSPI nor due to change introduced in mtd/spi in linux 5.0 commit 84d043185dbe ("spi: Add a driver for the Freescale/NXP QuadSPI controller")
This patch works only for linux kernel version > 5.0. In order to use
bootargs for kernel < 5.0, use the following bootargsCONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:2m(uboot),14m(free)" CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:2m(uboot),14m(free)"
---
v4:
Update commit message
v3:
Update commit message
v2:
Update commit message
configs/ls1046aqds_qspi_defconfig | 4 ++-- configs/ls1046aqds_sdcard_qspi_defconfig | 4 ++-- configs/ls1046ardb_emmc_defconfig | 4 ++-- configs/ls1046ardb_qspi_SECURE_BOOT_defconfig | 4 ++-- configs/ls1046ardb_qspi_defconfig | 4 ++-- configs/ls1046ardb_qspi_spl_defconfig | 4 ++-- configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig | 4 ++-- configs/ls1046ardb_sdcard_defconfig | 4 ++-- configs/ls1046ardb_tfa_SECURE_BOOT_defconfig | 4 ++-- configs/ls1046ardb_tfa_defconfig | 4 ++-- 10 files changed, 20 insertions(+), 20 deletions(-)
configs/ls1046aqds_qspi_defconfig +2 -2
@@ -10,7 +10,7 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:2m(uboot),14m(free)" +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:2m(uboot),14m(free)" # CONFIG_USE_BOOTCOMMAND is not set CONFIG_MISC_INIT_R=y CONFIG_CMD_BOOTZ=y
@@ -25,7 +25,7 @@ CONFIG_CMD_SF=y CONFIG_CMD_USB=y CONFIG_CMD_CACHE=y CONFIG_MP=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:2m(uboot),14m(free)" +CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:2m(uboot),14m(free)" CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart" CONFIG_ENV_IS_IN_SPI_FLASH=y
configs/ls1046aqds_sdcard_qspi_defconfig +2 -2
@@ -17,7 +17,7 @@ CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT_QSPI" CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:2m(uboot),14m(free)" +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:2m(uboot),14m(free)" # CONFIG_USE_BOOTCOMMAND is not set CONFIG_MISC_INIT_R=y CONFIG_SPL_BOARD_INIT=y
@@ -39,7 +39,7 @@ CONFIG_CMD_SF=y CONFIG_CMD_USB=y CONFIG_CMD_CACHE=y CONFIG_MP=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:2m(uboot),14m(free)" +CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:2m(uboot),14m(free)" # CONFIG_SPL_EFI_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart"
configs/ls1046ardb_emmc_defconfig +2 -2
@@ -17,7 +17,7 @@ CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,EMMC_BOOT" CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" # CONFIG_USE_BOOTCOMMAND is not set CONFIG_MISC_INIT_R=y CONFIG_SPL_BOARD_INIT=y
@@ -36,7 +36,7 @@ CONFIG_CMD_SF=y CONFIG_CMD_USB=y CONFIG_CMD_CACHE=y CONFIG_MP=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" +CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" # CONFIG_SPL_EFI_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
configs/ls1046ardb_qspi_SECURE_BOOT_defconfig +2 -2
@@ -12,7 +12,7 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" CONFIG_MISC_INIT_R=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y
@@ -23,7 +23,7 @@ CONFIG_CMD_SF=y CONFIG_CMD_USB=y CONFIG_CMD_CACHE=y CONFIG_MP=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" +CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb" CONFIG_DM=y
configs/ls1046ardb_qspi_defconfig +2 -2
@@ -11,7 +11,7 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" CONFIG_MISC_INIT_R=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y
@@ -22,7 +22,7 @@ CONFIG_CMD_SF=y CONFIG_CMD_USB=y CONFIG_CMD_CACHE=y CONFIG_MP=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" +CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb" CONFIG_ENV_IS_IN_SPI_FLASH=y
configs/ls1046ardb_qspi_spl_defconfig +2 -2
@@ -18,7 +18,7 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" CONFIG_MISC_INIT_R=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_ENV_SUPPORT=y
@@ -38,7 +38,7 @@ CONFIG_CMD_SF=y CONFIG_CMD_USB=y CONFIG_CMD_CACHE=y CONFIG_MP=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" +CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" # CONFIG_SPL_EFI_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig +2 -2
@@ -17,7 +17,7 @@ CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" CONFIG_MISC_INIT_R=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
@@ -36,7 +36,7 @@ CONFIG_CMD_SF=y CONFIG_CMD_USB=y CONFIG_CMD_CACHE=y CONFIG_MP=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" +CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" # CONFIG_SPL_EFI_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
configs/ls1046ardb_sdcard_defconfig +2 -2
@@ -17,7 +17,7 @@ CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" CONFIG_MISC_INIT_R=y CONFIG_SPL_BOARD_INIT=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
@@ -35,7 +35,7 @@ CONFIG_CMD_SF=y CONFIG_CMD_USB=y CONFIG_CMD_CACHE=y CONFIG_MP=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" +CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" # CONFIG_SPL_EFI_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
configs/ls1046ardb_tfa_SECURE_BOOT_defconfig +2 -2
@@ -13,7 +13,7 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" CONFIG_MISC_INIT_R=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y
@@ -24,7 +24,7 @@ CONFIG_CMD_SF=y CONFIG_CMD_USB=y CONFIG_CMD_CACHE=y CONFIG_MP=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" +CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb" CONFIG_DM=y
configs/ls1046ardb_tfa_defconfig +2 -2
@@ -12,7 +12,7 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" CONFIG_MISC_INIT_R=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y
@@ -23,7 +23,7 @@ CONFIG_CMD_SF=y CONFIG_CMD_USB=y CONFIG_CMD_CACHE=y CONFIG_MP=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" +CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb" CONFIG_ENV_IS_IN_MMC=y
Signature · 1 line
2.17.1
PATCH v4 1/1 configs: ls1046: Update mtd-id for QSPI nor in mtdparts variable
Quoted 34 lines
-----Original Message-----
From: Kuldeep Singh
Sent: Monday, April 8, 2019 11:33 AM
To: u-boot at lists.denx.de
Cc: Prabhakar Kushwaha <[email protected]>; Mingkai Hu <[email protected]>; Jagdish Gediya <[email protected]>; Ashish Kumar <[email protected]>; Kuldeep Singh <[email protected]>
Subject: [PATCH v4] configs: ls1046: Update mtd-id for QSPI nor in mtdparts variableUpdate mtd-id for QSPI nor due to change introduced in mtd/spi in linux 5.0 commit
84d043185dbe("spi: Add a driver for the Freescale/NXP QuadSPI controller")This patch works only for linux kernel version > 5.0. In order to use bootargs for kernel < 5.0, use the following bootargs
CONFIG_BOOTARGS="console=ttyS0,115200root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:2m(uboot),14m(free)"CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:2m(uboot),14m(free)"Signed-off-by Kuldeep Singh <[email protected]>---
v4:
Update commit messagev3:
Update commit messagev2:
Update commit message
Quoted 12 lines
configs/ls1046aqds_qspi_defconfig | 4 ++-- configs/ls1046aqds_sdcard_qspi_defconfig | 4 ++-- configs/ls1046ardb_emmc_defconfig | 4 ++-- configs/ls1046ardb_qspi_SECURE_BOOT_defconfig | 4 ++-- configs/ls1046ardb_qspi_defconfig | 4 ++-- configs/ls1046ardb_qspi_spl_defconfig | 4 ++-- configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig | 4 ++-- configs/ls1046ardb_sdcard_defconfig | 4 ++-- configs/ls1046ardb_tfa_SECURE_BOOT_defconfig | 4 ++-- configs/ls1046ardb_tfa_defconfig | 4 ++-- 10 files changed, 20 insertions(+), 20 deletions(-)
fix chechpatch warning i.e. updated subject and applied to fsl-qoriq master, awaiting upstream
pk