hwmon: (pmbus/ir38064): Add driver for Infineon IR38064 Voltage Regulator
PATCH 1/1 hwmon: (pmbus/ir38064): Add driver for Infineon IR38064 Voltage Regulator
From: Maxim Sloyko <[email protected]>
Add the pmbus driver for the Infineon ir38064 voltage regulator.
--- drivers/hwmon/pmbus/Kconfig | 9 ++++++ drivers/hwmon/pmbus/Makefile | 1 + drivers/hwmon/pmbus/ir38064.c | 60 +++++++++++++++++++++++++++++++++++ 3 files changed, 70 insertions(+) create mode 100644 drivers/hwmon/pmbus/ir38064.c
drivers/hwmon/pmbus/Kconfig +9 -0
@@ -64,6 +64,15 @@ config SENSORS_ISL68137 This driver can also be built as a module. If so, the module will be called isl68137. +config SENSORS_IR38064 + tristate "Infineon IR38064" + help + If you say yes here you get hardware monitoring support for Infineon + IR38064. + + This driver can also be built as a module. If so, the module will + be called ir38064. + config SENSORS_LM25066 tristate "National Semiconductor LM25066 and compatibles" help
drivers/hwmon/pmbus/Makefile +1 -0
@@ -9,6 +9,7 @@ obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o obj-$(CONFIG_SENSORS_IR35221) += ir35221.o obj-$(CONFIG_SENSORS_ISL68137) += isl68137.o +obj-$(CONFIG_SENSORS_IR38064) += ir38064.o obj-$(CONFIG_SENSORS_LM25066) += lm25066.o obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o obj-$(CONFIG_SENSORS_LTC3815) += ltc3815.o
drivers/hwmon/pmbus/ir38064.c new file +60 -0
60 lines not on this page · raw message
Signature · 1 line
2.21.0.392.gf8f6787159e-goog
Quoted 113 lines · Patrick Venture
From: Maxim Sloyko <[email protected]>
Add the pmbus driver for the Infineon ir38064 voltage regulator.
Signed-off-by Maxim Sloyko <[email protected]>Signed-off-by Patrick Venture <[email protected]>--- drivers/hwmon/pmbus/Kconfig | 9 ++++++ drivers/hwmon/pmbus/Makefile | 1 + drivers/hwmon/pmbus/ir38064.c | 60 +++++++++++++++++++++++++++++++++++ 3 files changed, 70 insertions(+) create mode 100644 drivers/hwmon/pmbus/ir38064.cdrivers/hwmon/pmbus/Kconfig +9
-0@@ -64,6 +64,15 @@ config SENSORS_ISL68137 This driver can also be built as a module. If so, the module will be called isl68137. +config SENSORS_IR38064 + tristate "Infineon IR38064" + help + If you say yes here you get hardware monitoring support for Infineon + IR38064. + + This driver can also be built as a module. If so, the module will + be called ir38064. + config SENSORS_LM25066 tristate "National Semiconductor LM25066 and compatibles" helpdrivers/hwmon/pmbus/Makefile +1
-0@@ -9,6 +9,7 @@ obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o obj-$(CONFIG_SENSORS_IR35221) += ir35221.o obj-$(CONFIG_SENSORS_ISL68137) += isl68137.o +obj-$(CONFIG_SENSORS_IR38064) += ir38064.o obj-$(CONFIG_SENSORS_LM25066) += lm25066.o obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o obj-$(CONFIG_SENSORS_LTC3815) += ltc3815.odrivers/hwmon/pmbus/ir38064.c new file +60
-1@@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Hardware monitoring driver for Infineon IR38064 +* +* Copyright (c) 2017 Google Inc +* +*/ + +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include "pmbus.h" + +static struct pmbus_driver_info ir38064_info = { + .pages =1 , + .format[PSC_VOLTAGE_IN ] = linear, + .format[PSC_VOLTAGE_OUT ] = direct, + .format[PSC_CURRENT_OUT ] = linear, + .format[PSC_POWER ] = linear, + .format[PSC_TEMPERATURE ] = linear, + .m[PSC_VOLTAGE_OUT ] =256 , + .b[PSC_VOLTAGE_OUT ] =0 , + .R[PSC_VOLTAGE_OUT ] =0 , + .func[0 ] =PMBUS_HAVE_VIN |PMBUS_HAVE_STATUS_INPUT + |PMBUS_HAVE_TEMP |PMBUS_HAVE_STATUS_TEMP + |PMBUS_HAVE_VOUT |PMBUS_HAVE_STATUS_VOUT + |PMBUS_HAVE_IOUT |PMBUS_HAVE_STATUS_IOUT + |PMBUS_HAVE_POUT , +}; + +static int ir38064_probe (struct i2c_client *client, +const struct i2c_device_id *id) +{ +return pmbus_do_probe (client, id, &ir38064_info); +} + +static const struct i2c_device_id ir38064_id[] = { + {"ir38064" ,0 }, + {} +}; + +MODULE_DEVICE_TABLE (i2c, ir38064_id); + +/* This is the driver that will be inserted */ +static struct i2c_driver ir38064_driver = { + .driver = { + .name ="ir38064" , + }, + .probe = ir38064_probe, + .remove = pmbus_do_remove, + .id_table = ir38064_id, +}; + +module_i2c_driver (ir38064_driver); + +MODULE_AUTHOR ("Maxim Sloyko <[email protected]>" ); +MODULE_DESCRIPTION ("PMBus driver for Infineon IR38064" ); +MODULE_LICENSE ("GPL" ); --
Quoted 1 line
2.21.0.392.gf8f6787159e-goog
I will also send this to upstream-upstream once I finish the isl patchset since that will require documentation and reworking various aspects of it... Although maybe I should flip them and push this patchset up ahead -- maybe it'll require less documentation since it's really an empty driver.
Quoted 1 line
Joel Stanley
AppliedQuoted 7 lines · Patrick Venture
From: Maxim Sloyko <[email protected]>
Add the pmbus driver for the Infineon ir38064 voltage regulator.
Signed-off-by Maxim Sloyko <[email protected]>Signed-off-by Patrick Venture <[email protected]>
Applied to dev-5.0.
Cheers,
Joel