Skip to contentSkip to conversation

spapr: add splpar hcalls H_JOIN, H_PROD, H_CONFER

PATCH Superseded Nicholas Piggin 2 participants 2 messages Apr 12, 2019

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 spapr: add splpar hcalls H_JOIN, H_PROD, H_CONFER

These implementations have a few deficiencies that are noted, but are good enough for Linux to use.

---
This has been tested with TCG with some Linux hacks to use H_JOIN/H_PROD for suspend and CPU unplug (plus an implementation of ibm,suspend-me to do the suspend). Not sure if KVM might need some more work to support H_JOIN properly, but right now Linux only uses it on PowerVM.

 hw/ppc/spapr_hcall.c | 84 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 84 insertions(+)
hw/ppc/spapr_hcall.c +84 -0
index 8a736797b9..6829cadcd3 100644
@@ -1065,6 +1065,86 @@ static target_ulong h_cede(PowerPCCPU *cpu, SpaprMachineState *spapr,
     return H_SUCCESS;
 }
 
+static target_ulong h_join(PowerPCCPU *cpu, SpaprMachineState *spapr,
+                           target_ulong opcode, target_ulong *args)
+{
+    CPUPPCState *env = &cpu->env;
+    CPUState *cs = CPU(cpu);
+
+    if (env->msr & (1ULL << MSR_EE))
+        return H_BAD_MODE;
+
+    /*
+     * This should check for single-threaded mode. In practice, Linux
+     * does not try to H_JOIN all CPUs.
+     */
+
+    cs->halted = 1;
+    cs->exception_index = EXCP_HALTED;
+    cs->exit_request = 1;
+
+    return H_SUCCESS;
+}
+
+static target_ulong h_confer(PowerPCCPU *cpu, SpaprMachineState *spapr,
+                           target_ulong opcode, target_ulong *args)
+{
+    target_long target = args[0];
+    CPUState *cs = CPU(cpu);
+
+    /*
+     * This does not do a targeted yield or confer, but check the parameter
+     * anyway. -1 means confer to all/any other CPUs.
+     */
+    if (target != -1 && !CPU(spapr_find_cpu(target)))
+        return H_PARAMETER;
+
+    /*
+     * H_CONFER with target == this is not exactly the same as H_JOIN
+     * according to PAPR (e.g., MSR[EE] check and single threaded check
+     * is not done in this case), but unlikely to matter.
+     */
+    if (cpu == spapr_find_cpu(target))
+        return h_join(cpu, spapr, opcode, args);
+
+    /*
+     * This does not implement the dispatch sequence check that PAPR calls for,
+     * but PAPR also specifies a stronger implementation where the target must
+     * be run (or EE, or H_PROD) before H_CONFER returns. Without such a hard
+     * scheduling requirement implemented, there is no correctness reason to
+     * implement the dispatch sequence check.
+     */
+    cs->exception_index = EXCP_YIELD;
+    cpu_loop_exit(cs);
+
+    return H_SUCCESS;
+}
+
+/*
+ * H_PROD and H_CONFER are specified to only modify GPR r3, which is not
+ * achievable running under KVM, although KVM already implements H_CONFER
+ * this way.
+ */
+static target_ulong h_prod(PowerPCCPU *cpu, SpaprMachineState *spapr,
+                           target_ulong opcode, target_ulong *args)
+{
+    target_long target = args[0];
+    CPUState *cs;
+
+    /*
+     * This does not maintain a prod flag for the vCPU that PAPR asks for.
+     */
+
+    cs = CPU(spapr_find_cpu(target));
+    if (!cs)
+        return H_PARAMETER;
+
+    cs->halted = 0;
+    qemu_cpu_kick(cs);
+
+    return H_SUCCESS;
+}
+
 static target_ulong h_rtas(PowerPCCPU *cpu, SpaprMachineState *spapr,
                            target_ulong opcode, target_ulong *args)
 {
@@ -1860,6 +1940,10 @@ static void hypercall_register_types(void)
     /* hcall-splpar */
     spapr_register_hypercall(H_REGISTER_VPA, h_register_vpa);
     spapr_register_hypercall(H_CEDE, h_cede);
+    spapr_register_hypercall(H_CONFER, h_confer);
+    spapr_register_hypercall(H_JOIN, h_join);
+    spapr_register_hypercall(H_PROD, h_prod);
+
     spapr_register_hypercall(H_SIGNAL_SYS_RESET, h_signal_sys_reset);
 
     /* processor register resource access h-calls */
Signature · 1 line
2.20.1
#1 lore raw
Patchew URL: https://patchew.org/QEMU/[email protected]/

Patchew URL: https://patchew.org/QEMU/[email protected]/

Hi,

This series seems to have some coding style problems. See output below for more information:

Message-id: [email protected]
Subject: [Qemu-devel] [PATCH] spapr: add splpar hcalls H_JOIN, H_PROD, H_CONFER
Type: series

=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===

Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu

 t [tag update]            patchew/[email protected] -> patchew/[email protected]
 t [tag update]            patchew/[email protected] -> patchew/[email protected]
 * [new tag]               patchew/[email protected] -> patchew/[email protected]

Switched to a new branch 'test'
2f73cb0a80 spapr: add splpar hcalls H_JOIN, H_PROD, H_CONFER

=== OUTPUT BEGIN ===
ERROR: braces {} are necessary for all arms of this statement #28: FILE: hw/ppc/spapr_hcall.c:1074:
+ if (env->msr & (1ULL << MSR_EE))
[...]

ERROR: braces {} are necessary for all arms of this statement #53: FILE: hw/ppc/spapr_hcall.c:1099:
+ if (target != -1 && !CPU(spapr_find_cpu(target)))
[...]

ERROR: braces {} are necessary for all arms of this statement #61: FILE: hw/ppc/spapr_hcall.c:1107:
+ if (cpu == spapr_find_cpu(target))
[...]

ERROR: braces {} are necessary for all arms of this statement #93: FILE: hw/ppc/spapr_hcall.c:1139:
+ if (!cs)
[...]

total: 4 errors, 0 warnings, 96 lines checked

Commit 2f73cb0a80a1 (spapr: add splpar hcalls H_JOIN, H_PROD, H_CONFER) has style problems, please review. If any of these errors are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
=== OUTPUT END ===

Test command exited with code: 1

The full log is available at
http://patchew.org/logs/[email protected]/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]