regulator: tps80031: Remove unused *rdev from struct tps80031_regulator
PATCH 1/3 regulator: tps80031: Remove unused *rdev from struct tps80031_regulator
The ri-rdev is assigend but not used, so remove it.
--- drivers/regulator/tps80031-regulator.c | 2 -- 1 file changed, 2 deletions(-)
drivers/regulator/tps80031-regulator.c +0 -2
@@ -85,7 +85,6 @@ struct tps80031_regulator_info {struct tps80031_regulator {struct device *dev; -struct regulator_dev *rdev;struct tps80031_regulator_info *rinfo;u8 device_flags;
@@ -736,7 +735,6 @@ static int tps80031_regulator_probe(struct platform_device *pdev) ri->rinfo->desc.name);return PTR_ERR (rdev); } - ri->rdev = rdev; }platform_set_drvdata (pdev, pmic);
Signature · 1 line
2.17.1
PATCH 2/3 regulator: tps80031: Constify regulator_ops and tps80031_dcdc_voltages array
These regulator_ops variables and tps80031_dcdc_voltages array never need to be modified, make them const so compiler can put them to .rodata.
--- drivers/regulator/tps80031-regulator.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/regulator/tps80031-regulator.c +6 -6
@@ -154,7 +154,7 @@ static int tps80031_reg_disable(struct regulator_dev *rdev) }/* DCDC voltages for the selector of 58 to 63 */ -static int tps80031_dcdc_voltages[4 ][5 ] = { +static const int tps80031_dcdc_voltages[4 ][5 ] = { {1350 ,1500 ,1800 ,1900 ,2100 }, {1350 ,1500 ,1800 ,1900 ,2100 }, {2084 ,2315 ,2778 ,2932 ,3241 },
@@ -377,7 +377,7 @@ static int tps80031_vbus_disable(struct regulator_dev *rdev)return ret; } -static struct regulator_ops tps80031_dcdc_ops = { +static const struct regulator_ops tps80031_dcdc_ops = { .list_voltage = tps80031_dcdc_list_voltage, .set_voltage_sel = tps80031_dcdc_set_voltage_sel, .get_voltage_sel = tps80031_dcdc_get_voltage_sel,
@@ -386,7 +386,7 @@ static struct regulator_ops tps80031_dcdc_ops = { .is_enabled = tps80031_reg_is_enabled, }; -static struct regulator_ops tps80031_ldo_ops = { +static const struct regulator_ops tps80031_ldo_ops = { .list_voltage = tps80031_ldo_list_voltage, .map_voltage = tps80031_ldo_map_voltage, .set_voltage_sel = regulator_set_voltage_sel_regmap,
@@ -396,18 +396,18 @@ static struct regulator_ops tps80031_ldo_ops = { .is_enabled = tps80031_reg_is_enabled, }; -static struct regulator_ops tps80031_vbus_sw_ops = { +static const struct regulator_ops tps80031_vbus_sw_ops = { .list_voltage = regulator_list_voltage_linear, .enable = tps80031_vbus_enable, .disable = tps80031_vbus_disable, .is_enabled = tps80031_vbus_is_enabled, }; -static struct regulator_ops tps80031_vbus_hw_ops = { +static const struct regulator_ops tps80031_vbus_hw_ops = { .list_voltage = regulator_list_voltage_linear, }; -static struct regulator_ops tps80031_ext_reg_ops = { +static const struct regulator_ops tps80031_ext_reg_ops = { .list_voltage = regulator_list_voltage_linear, .enable = tps80031_reg_enable, .disable = tps80031_reg_disable,
Signature · 1 line
2.17.1
Mark Brown
maintainerApplied "regulator: tps80031: Constify regulator_ops and tps80031_dcdc_voltages array" to the regulator tree
The patch
regulator: tps80031: Constify regulator_ops and tps80031_dcdc_voltages array
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From 4b77a49cb82652488e35ed8d3809f33cedbad6dc Mon Sep 17 00:00:00 2001
From: Axel Lin <[email protected]>
Date: Tue, 16 Apr 2019 18:17:28 +0800
Subject: [PATCH] regulator: tps80031: Constify regulator_ops and
tps80031_dcdc_voltages array
These regulator_ops variables and tps80031_dcdc_voltages array never need to be modified, make them const so compiler can put them to .rodata.
--- drivers/regulator/tps80031-regulator.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/regulator/tps80031-regulator.c +6 -6
@@ -154,7 +154,7 @@ static int tps80031_reg_disable(struct regulator_dev *rdev) }/* DCDC voltages for the selector of 58 to 63 */ -static int tps80031_dcdc_voltages[4 ][5 ] = { +static const int tps80031_dcdc_voltages[4 ][5 ] = { {1350 ,1500 ,1800 ,1900 ,2100 }, {1350 ,1500 ,1800 ,1900 ,2100 }, {2084 ,2315 ,2778 ,2932 ,3241 },
@@ -377,7 +377,7 @@ static int tps80031_vbus_disable(struct regulator_dev *rdev)return ret; } -static struct regulator_ops tps80031_dcdc_ops = { +static const struct regulator_ops tps80031_dcdc_ops = { .list_voltage = tps80031_dcdc_list_voltage, .set_voltage_sel = tps80031_dcdc_set_voltage_sel, .get_voltage_sel = tps80031_dcdc_get_voltage_sel,
@@ -386,7 +386,7 @@ static struct regulator_ops tps80031_dcdc_ops = { .is_enabled = tps80031_reg_is_enabled, }; -static struct regulator_ops tps80031_ldo_ops = { +static const struct regulator_ops tps80031_ldo_ops = { .list_voltage = tps80031_ldo_list_voltage, .map_voltage = tps80031_ldo_map_voltage, .set_voltage_sel = regulator_set_voltage_sel_regmap,
@@ -396,18 +396,18 @@ static struct regulator_ops tps80031_ldo_ops = { .is_enabled = tps80031_reg_is_enabled, }; -static struct regulator_ops tps80031_vbus_sw_ops = { +static const struct regulator_ops tps80031_vbus_sw_ops = { .list_voltage = regulator_list_voltage_linear, .enable = tps80031_vbus_enable, .disable = tps80031_vbus_disable, .is_enabled = tps80031_vbus_is_enabled, }; -static struct regulator_ops tps80031_vbus_hw_ops = { +static const struct regulator_ops tps80031_vbus_hw_ops = { .list_voltage = regulator_list_voltage_linear, }; -static struct regulator_ops tps80031_ext_reg_ops = { +static const struct regulator_ops tps80031_ext_reg_ops = { .list_voltage = regulator_list_voltage_linear, .enable = tps80031_reg_enable, .disable = tps80031_reg_disable,
Signature · 1 line
2.20.1
PATCH 3/3 regulator: tps80031: Switch to SPDX identifier
In reply to Axel Lin--- drivers/regulator/tps80031-regulator.c | 34 ++++++++------------------ 1 file changed, 10 insertions(+), 24 deletions(-)
drivers/regulator/tps80031-regulator.c +10 -24
@@ -1,27 +1,13 @@ -/* -* tps80031-regulator.c -- TI TPS80031 regulator driver. -* -* Regulator driver for TI TPS80031/TPS80032 Fully Integrated Power -* Management with Power Path and Battery Charger. -* -* Copyright (c) 2012, NVIDIA Corporation. -* -* Author: Laxman Dewangan <[email protected]> -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License as -* published by the Free Software Foundation version 2. -* -* This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, -* whether express or implied; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -* General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA -* 02111-1307, USA -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// tps80031-regulator.c -- TI TPS80031 regulator driver. +// +// Regulator driver for TI TPS80031/TPS80032 Fully Integrated Power +// Management with Power Path and Battery Charger. +// +// Copyright (c) 2012, NVIDIA Corporation. +// +// Author: Laxman Dewangan <[email protected]> #include <linux/delay.h> #include <linux/err.h>
Signature · 1 line
2.17.1
Mark Brown
maintainerApplied "regulator: tps80031: Switch to SPDX identifier" to the regulator tree
The patch
regulator: tps80031: Switch to SPDX identifier
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From fd1a4da3bfd77d3fe15165948b948ead2b522c1c Mon Sep 17 00:00:00 2001
From: Axel Lin <[email protected]>
Date: Tue, 16 Apr 2019 18:17:29 +0800
Subject: [PATCH] regulator: tps80031: Switch to SPDX identifier
--- drivers/regulator/tps80031-regulator.c | 34 ++++++++------------------ 1 file changed, 10 insertions(+), 24 deletions(-)
drivers/regulator/tps80031-regulator.c +10 -24
@@ -1,27 +1,13 @@ -/* -* tps80031-regulator.c -- TI TPS80031 regulator driver. -* -* Regulator driver for TI TPS80031/TPS80032 Fully Integrated Power -* Management with Power Path and Battery Charger. -* -* Copyright (c) 2012, NVIDIA Corporation. -* -* Author: Laxman Dewangan <[email protected]> -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License as -* published by the Free Software Foundation version 2. -* -* This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, -* whether express or implied; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -* General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA -* 02111-1307, USA -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// tps80031-regulator.c -- TI TPS80031 regulator driver. +// +// Regulator driver for TI TPS80031/TPS80032 Fully Integrated Power +// Management with Power Path and Battery Charger. +// +// Copyright (c) 2012, NVIDIA Corporation. +// +// Author: Laxman Dewangan <[email protected]> #include <linux/delay.h> #include <linux/err.h>
Signature · 1 line
2.20.1
Mark Brown
maintainerApplied "regulator: tps80031: Remove unused *rdev from struct tps80031_regulator" to the regulator tree
In reply to Axel LinThe patch
regulator: tps80031: Remove unused *rdev from struct tps80031_regulator
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From de110f387371337cf90f40055cf1ebdf01b6f427 Mon Sep 17 00:00:00 2001
From: Axel Lin <[email protected]>
Date: Tue, 16 Apr 2019 18:17:27 +0800
Subject: [PATCH] regulator: tps80031: Remove unused *rdev from struct
tps80031_regulator
The ri-rdev is assigend but not used, so remove it.
--- drivers/regulator/tps80031-regulator.c | 2 -- 1 file changed, 2 deletions(-)
drivers/regulator/tps80031-regulator.c +0 -2
@@ -85,7 +85,6 @@ struct tps80031_regulator_info {struct tps80031_regulator {struct device *dev; -struct regulator_dev *rdev;struct tps80031_regulator_info *rinfo;u8 device_flags;
@@ -736,7 +735,6 @@ static int tps80031_regulator_probe(struct platform_device *pdev) ri->rinfo->desc.name);return PTR_ERR (rdev); } - ri->rdev = rdev; }platform_set_drvdata (pdev, pmic);
Signature · 1 line
2.20.1