HID: debug: fix race condition with between rdesc_show() and device removal
Subsystems (13)
Sasha Levin
maintainerPATCH 1/15 HID: debug: fix race condition with between rdesc_show() and device removal
From: "He, Bo" <[email protected]>
[ Upstream commit cef0d4948cb0a02db37ebfdc320e127c77ab1637 ]
There is a race condition that could happen if hid_debug_rdesc_show() is running while hdev is in the process of going away (device removal, system suspend, etc) which could result in NULL pointer dereference:
BUG: unable to handle kernel paging request at 0000000783316040 CPU: 1 PID: 1512 Comm: getevent Tainted: G U O 4.19.20-quilt-2e5dc0ac-00029-gc455a447dd55 #1 RIP: 0010:hid_dump_device+0x9b/0x160 Call Trace: hid_debug_rdesc_show+0x72/0x1d0 seq_read+0xe0/0x410 full_proxy_read+0x5f/0x90 __vfs_read+0x3a/0x170 vfs_read+0xa0/0x150 ksys_read+0x58/0xc0 __x64_sys_read+0x1a/0x20 do_syscall_64+0x55/0x110 entry_SYSCALL_64_after_hwframe+0x49/0xbe
Grab driver_input_lock to make sure the input device exists throughout the whole process of dumping the rdesc.
--- drivers/hid/hid-debug.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/hid/hid-debug.c +5 -0
@@ -1058,10 +1058,15 @@ static int hid_debug_rdesc_show(struct seq_file *f, void *p)seq_printf (f,"\n\n" );/* dump parsed data and input mappings */ +if (down_interruptible (&hdev->driver_input_lock)) +return 0 ; +hid_dump_device (hdev, f);seq_printf (f,"\n" );hid_dump_input_mapping (hdev, f); +up (&hdev->driver_input_lock); +return 0 ; }
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 9/15 scsi: storvsc: Fix calculation of sub-channel count
From: Michael Kelley <[email protected]>
[ Upstream commit 382e06d11e075a40b4094b6ef809f8d4bcc7ab2a ]
When the number of sub-channels offered by Hyper-V is >= the number of CPUs in the VM, calculate the correct number of sub-channels. The current code produces one too many.
This scenario arises only when the number of CPUs is artificially restricted (for example, with maxcpus=<n> on the kernel boot line), because Hyper-V normally offers a sub-channel count < number of CPUs. While the current code doesn't break, the extra sub-channel is unbalanced across the CPUs (for example, a total of 5 channels on a VM with 4 CPUs).
--- drivers/scsi/storvsc_drv.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
drivers/scsi/storvsc_drv.c +11 -2
@@ -613,13 +613,22 @@ static void handle_sc_creation(struct vmbus_channel *new_sc)static void handle_multichannel_storage (struct hv_device *device,int max_chns) {struct storvsc_device *stor_device; -int num_cpus =num_online_cpus ();int num_sc;struct storvsc_cmd_request *request;struct vstor_packet *vstor_packet;int ret, t; - num_sc = ((max_chns > num_cpus) ? num_cpus : max_chns); +/* +* If the number of CPUs is artificially restricted, such as +* with maxcpus=1 on the kernel boot line, Hyper-V could offer +* sub-channels >= the number of CPUs. These sub-channels +* should not be created. The primary channel is already created +* and assigned to one CPU, so check against # CPUs - 1. +*/ + num_sc =min ((int )(num_online_cpus () -1 ), max_chns); +if (!num_sc) +return ; + stor_device =get_out_stor_device (device);if (!stor_device)return ;
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 3/15 igb: Fix WARN_ONCE on runtime suspend
In reply to Sasha LevinFrom: Arvind Sankar <[email protected]>
[ Upstream commit dabb8338be533c18f50255cf39ff4f66d4dabdbe ]
The runtime_suspend device callbacks are not supposed to save configuration state or change the power state. Commit fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend") changed the driver to not save configuration state during runtime suspend, however the driver callback still put the device into a low-power state. This causes a warning in the pci pm core and results in pci_pm_runtime_suspend not calling pci_save_state or pci_finish_runtime_suspend.
Fix this by not changing the power state either, leaving that to pci pm core, and make the same change for suspend callback as well.
Also move a couple of defines into the appropriate header file instead of inline in the .c file.
--- .../net/ethernet/intel/igb/e1000_defines.h | 2 + drivers/net/ethernet/intel/igb/igb_main.c | 57 +++---------------- 2 files changed, 10 insertions(+), 49 deletions(-)
drivers/net/ethernet/intel/igb/e1000_defines.h +2 -0
@@ -193,6 +193,8 @@/* enable link status from external LINK_0 and LINK_1 pins */ #define E1000_CTRL_SWDPIN0 0x00040000/* SWDPIN 0 value */ #define E1000_CTRL_SWDPIN1 0x00080000/* SWDPIN 1 value */ +#define E1000_CTRL_ADVD3WUC 0x00100000/* D3 WUC */ +#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000/* PHY PM enable */ #define E1000_CTRL_SDP0_DIR 0x00400000/* SDP0 Data direction */ #define E1000_CTRL_SDP1_DIR 0x00800000/* SDP1 Data direction */ #define E1000_CTRL_RST 0x04000000/* Global reset */
drivers/net/ethernet/intel/igb/igb_main.c +8 -49
97 lines not on this page · raw message
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 6/15 debugfs: fix use-after-free on symlink traversal
In reply to Sasha LevinFrom: Al Viro <[email protected]>
[ Upstream commit 93b919da64c15b90953f96a536e5e61df896ca57 ]
symlink body shouldn't be freed without an RCU delay. Switch debugfs to ->destroy_inode() and use of call_rcu(); free both the inode and symlink body in the callback. Similar to solution for bpf, only here it's even more obvious that ->evict_inode() can be dropped.
--- fs/debugfs/inode.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)
fs/debugfs/inode.c +9 -4
@@ -164,19 +164,24 @@ static int debugfs_show_options(struct seq_file *m, struct dentry *root)return 0 ; } -static void debugfs_evict_inode (struct inode *inode) +static void debugfs_i_callback (struct rcu_head *head) { -truncate_inode_pages_final (&inode->i_data); -clear_inode (inode); + struct inode *inode = container_of(head, struct inode, i_rcu);if (S_ISLNK (inode->i_mode))kfree (inode->i_link); +free_inode_nonrcu (inode); +} + +static void debugfs_destroy_inode (struct inode *inode) +{ +call_rcu (&inode->i_rcu, debugfs_i_callback); }static const struct super_operations debugfs_super_operations = { .statfs = simple_statfs, .remount_fs = debugfs_remount, .show_options = debugfs_show_options, - .evict_inode = debugfs_evict_inode, + .destroy_inode = debugfs_destroy_inode, };static struct vfsmount *debugfs_automount (struct path *path)
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 7/15 rtc: da9063: set uie_unsupported when relevant
In reply to Sasha LevinFrom: Alexandre Belloni <[email protected]>
[ Upstream commit 882c5e552ffd06856de42261460f46e18319d259 ]
The DA9063AD doesn't support alarms on any seconds and its granularity is the minute. Set uie_unsupported in that case.
--- drivers/rtc/rtc-da9063.c | 7 +++++++ 1 file changed, 7 insertions(+)
drivers/rtc/rtc-da9063.c +7 -0
@@ -491,6 +491,13 @@ static int da9063_rtc_probe(struct platform_device *pdev)da9063_data_to_tm (data, &rtc->alarm_time, rtc); rtc->rtc_sync = false; +/* +* TODO: some models have alarms on a minute boundary but still support +* real hardware interrupts. Add this once the core supports it. +*/ +if (config->rtc_data_start !=RTC_SEC ) + rtc->rtc_dev->uie_unsupported =1 ; + irq_alarm =platform_get_irq_byname (pdev,"ALARM" ); ret = devm_request_threaded_irq(&pdev->dev, irq_alarm, NULL, da9063_alarm_event,
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 5/15 jffs2: fix use-after-free on symlink traversal
In reply to Sasha LevinFrom: Al Viro <[email protected]>
[ Upstream commit 4fdcfab5b5537c21891e22e65996d4d0dd8ab4ca ]
free the symlink body after the same RCU delay we have for freeing the struct inode itself, so that traversal during RCU pathwalk wouldn't step into freed memory.
--- fs/jffs2/readinode.c | 5 ----- fs/jffs2/super.c | 5 ++++- 2 files changed, 4 insertions(+), 6 deletions(-)
fs/jffs2/readinode.c +0 -5
@@ -1414,11 +1414,6 @@ void jffs2_do_clear_inode(struct jffs2_sb_info *c, struct jffs2_inode_info *f)jffs2_kill_fragtree (&f->fragtree, deleted?c:NULL ); -if (f->target) { -kfree (f->target); - f->target =NULL ; - } - fds = f->dents;while (fds) { fd = fds;
fs/jffs2/super.c +4 -1
@@ -47,7 +47,10 @@ static struct inode *jffs2_alloc_inode(struct super_block *sb)static void jffs2_i_callback (struct rcu_head *head) { struct inode *inode = container_of(head, struct inode, i_rcu); -kmem_cache_free (jffs2_inode_cachep,JFFS2_INODE_INFO (inode)); +struct jffs2_inode_info *f =JFFS2_INODE_INFO (inode); + +kfree (f->target); +kmem_cache_free (jffs2_inode_cachep, f); }static void jffs2_destroy_inode (struct inode *inode)
Signature · 6 lines
2.19.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
Sasha Levin
maintainerPATCH 8/15 vfio/pci: use correct format characters
In reply to Sasha LevinFrom: Louis Taylor <[email protected]>
[ Upstream commit 426b046b748d1f47e096e05bdcc6fb4172791307 ]
When compiling with -Wformat, clang emits the following warnings:
drivers/vfio/pci/vfio_pci.c:1601:5: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice, ^~~~~~
drivers/vfio/pci/vfio_pci.c:1601:13: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~
drivers/vfio/pci/vfio_pci.c:1601:21: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~~~~
drivers/vfio/pci/vfio_pci.c:1601:32: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~~~~
drivers/vfio/pci/vfio_pci.c:1605:5: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice, ^~~~~~
drivers/vfio/pci/vfio_pci.c:1605:13: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~
drivers/vfio/pci/vfio_pci.c:1605:21: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~~~~
drivers/vfio/pci/vfio_pci.c:1605:32: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~~~~
The types of these arguments are unconditionally defined, so this patch updates the format character to the correct ones for unsigned ints.
--- drivers/vfio/pci/vfio_pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/vfio/pci/vfio_pci.c +2 -2
@@ -1191,11 +1191,11 @@ static void __init vfio_pci_fill_ids(void) rc =pci_add_dynid (&vfio_pci_driver, vendor, device, subvendor, subdevice, class, class_mask,0 );if (rc) -pr_warn ("failed to add dynamic id [%04hx:%04hx[%04hx:%04hx]] class %#08x/%08x (%d)\n" , +pr_warn ("failed to add dynamic id [%04x:%04x[%04x:%04x]] class %#08x/%08x (%d)\n" , vendor, device, subvendor, subdevice, class, class_mask, rc);else -pr_info ("add [%04hx:%04hx[%04hx:%04hx]] class %#08x/%08x\n" , +pr_info ("add [%04x:%04x[%04x:%04x]] class %#08x/%08x\n" , vendor, device, subvendor, subdevice, class, class_mask); }
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 10/15 net: hns: Use NAPI_POLL_WEIGHT for hns driver
In reply to Sasha LevinFrom: Yonglong Liu <[email protected]>
[ Upstream commit acb1ce15a61154aa501891d67ebf79bc9ea26818 ]
When the HNS driver loaded, always have an error print:
"netif_napi_add() called with weight 256"
This is because the kernel checks the NAPI polling weights requested by drivers and it prints an error message if a driver requests a weight bigger than 64.
So use NAPI_POLL_WEIGHT to fix it.
--- drivers/net/ethernet/hisilicon/hns/hns_enet.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
drivers/net/ethernet/hisilicon/hns/hns_enet.c +2 -5
@@ -28,9 +28,6 @@#define SERVICE_TIMER_HZ (1 * HZ) -#define NIC_TX_CLEAN_MAX_NUM 256 -#define NIC_RX_CLEAN_MAX_NUM 64 -#define RCB_IRQ_NOT_INITED 0#define RCB_IRQ_INITED 1
@@ -1408,7 +1405,7 @@ static int hns_nic_init_ring_data(struct hns_nic_priv *priv) rd->fini_process = hns_nic_tx_fini_pro;netif_napi_add (priv->netdev, &rd->napi, - hns_nic_common_poll,NIC_TX_CLEAN_MAX_NUM ); + hns_nic_common_poll,NAPI_POLL_WEIGHT ); rd->ring->irq_init_flag =RCB_IRQ_NOT_INITED ; }for (i = h->q_num; i < h->q_num *2 ; i++) {
@@ -1420,7 +1417,7 @@ static int hns_nic_init_ring_data(struct hns_nic_priv *priv) rd->fini_process = hns_nic_rx_fini_pro;netif_napi_add (priv->netdev, &rd->napi, - hns_nic_common_poll,NIC_RX_CLEAN_MAX_NUM ); + hns_nic_common_poll,NAPI_POLL_WEIGHT ); rd->ring->irq_init_flag =RCB_IRQ_NOT_INITED ; }
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 11/15 net: hns: Fix WARNING when remove HNS driver with SMMU enabled
In reply to Sasha LevinFrom: Yonglong Liu <[email protected]>
[ Upstream commit 8601a99d7c0256b7a7fdd1ab14cf6c1f1dfcadc6 ]
When enable SMMU, remove HNS driver will cause a WARNING:
[ 141.924177] WARNING: CPU: 36 PID: 2708 at drivers/iommu/dma-iommu.c:443 __iommu_dma_unmap+0xc0/0xc8 [ 141.954673] Modules linked in: hns_enet_drv(-) [ 141.963615] CPU: 36 PID: 2708 Comm: rmmod Tainted: G W 5.0.0-rc1-28723-gb729c57de95c-dirty #32 [ 141.983593] Hardware name: Huawei D05/D05, BIOS Hisilicon D05 UEFI Nemo 1.8 RC0 08/31/2017 [ 142.000244] pstate: 60000005 (nZCv daif -PAN -UAO) [ 142.009886] pc : __iommu_dma_unmap+0xc0/0xc8 [ 142.018476] lr : __iommu_dma_unmap+0xc0/0xc8 [ 142.027066] sp : ffff000013533b90 [ 142.033728] x29: ffff000013533b90 x28: ffff8013e6983600 [ 142.044420] x27: 0000000000000000 x26: 0000000000000000 [ 142.055113] x25: 0000000056000000 x24: 0000000000000015 [ 142.065806] x23: 0000000000000028 x22: ffff8013e66eee68 [ 142.076499] x21: ffff8013db919800 x20: 0000ffffefbff000 [ 142.087192] x19: 0000000000001000 x18: 0000000000000007 [ 142.097885] x17: 000000000000000e x16: 0000000000000001 [ 142.108578] x15: 0000000000000019 x14: 363139343a70616d [ 142.119270] x13: 6e75656761705f67 x12: 0000000000000000 [ 142.129963] x11: 00000000ffffffff x10: 0000000000000006 [ 142.140656] x9 : 1346c1aa88093500 x8 : ffff0000114de4e0 [ 142.151349] x7 : 6662666578303d72 x6 : ffff0000105ffec8 [ 142.162042] x5 : 0000000000000000 x4 : 0000000000000000 [ 142.172734] x3 : 00000000ffffffff x2 : ffff0000114de500 [ 142.183427] x1 : 0000000000000000 x0 : 0000000000000035 [ 142.194120] Call trace: [ 142.199030] __iommu_dma_unmap+0xc0/0xc8 [ 142.206920] iommu_dma_unmap_page+0x20/0x28 [ 142.215335] __iommu_unmap_page+0x40/0x60 [ 142.223399] hnae_unmap_buffer+0x110/0x134 [ 142.231639] hnae_free_desc+0x6c/0x10c [ 142.239177] hnae_fini_ring+0x14/0x34 [ 142.246540] hnae_fini_queue+0x2c/0x40 [ 142.254080] hnae_put_handle+0x38/0xcc [ 142.261619] hns_nic_dev_remove+0x54/0xfc [hns_enet_drv] [ 142.272312] platform_drv_remove+0x24/0x64 [ 142.280552] device_release_driver_internal+0x17c/0x20c [ 142.291070] driver_detach+0x4c/0x90 [ 142.298259] bus_remove_driver+0x5c/0xd8 [ 142.306148] driver_unregister+0x2c/0x54 [ 142.314037] platform_driver_unregister+0x10/0x18 [ 142.323505] hns_nic_dev_driver_exit+0x14/0xf0c [hns_enet_drv] [ 142.335248] __arm64_sys_delete_module+0x214/0x25c [ 142.344891] el0_svc_common+0xb0/0x10c [ 142.352430] el0_svc_handler+0x24/0x80 [ 142.359968] el0_svc+0x8/0x7c0 [ 142.366104] ---[ end trace 60ad1cd58e63c407 ]---
The tx ring buffer map when xmit and unmap when xmit done. So in hnae_init_ring() did not map tx ring buffer, but in hnae_fini_ring() have a unmap operation for tx ring buffer, which is already unmapped when xmit done, than cause this WARNING.
The hnae_alloc_buffers() is called in hnae_init_ring(), so the hnae_free_buffers() should be in hnae_fini_ring(), not in hnae_free_desc().
In hnae_fini_ring(), adds a check is_rx_ring() as in hnae_init_ring(). When the ring buffer is tx ring, adds a piece of code to ensure that the tx ring is unmap.
--- drivers/net/ethernet/hisilicon/hns/hnae.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/ethernet/hisilicon/hns/hnae.c +3 -1
@@ -144,7 +144,6 @@ static int hnae_alloc_buffers(struct hnae_ring *ring)/* free desc along with its attached buffer */ static void hnae_free_desc (struct hnae_ring *ring) { -hnae_free_buffers (ring);dma_unmap_single (ring_to_dev (ring), ring->desc_dma_addr, ring->desc_num *sizeof (ring->desc[0 ]),ring_to_dma_dir (ring));
@@ -177,6 +176,9 @@ static int hnae_alloc_desc(struct hnae_ring *ring)/* fini ring, also free the buffer for the ring */ static void hnae_fini_ring (struct hnae_ring *ring) { +if (is_rx_ring (ring)) +hnae_free_buffers (ring); +hnae_free_desc (ring);kfree (ring->desc_cb); ring->desc_cb =NULL ;
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 12/15 hugetlbfs: fix memory leak for resv_map
In reply to Sasha LevinFrom: Mike Kravetz <[email protected]>
[ Upstream commit 58b6e5e8f1addd44583d61b0a03c0f5519527e35 ]
When mknod is used to create a block special file in hugetlbfs, it will allocate an inode and kmalloc a 'struct resv_map' via resv_map_alloc(). inode->i_mapping->private_data will point the newly allocated resv_map. However, when the device special file is opened bd_acquire() will set inode->i_mapping to bd_inode->i_mapping. Thus the pointer to the allocated resv_map is lost and the structure is leaked.
Programs to reproduce:
mount -t hugetlbfs nodev hugetlbfs
mknod hugetlbfs/dev b 0 0
exec 30<> hugetlbfs/dev
umount hugetlbfs/
resv_map structures are only needed for inodes which can have associated page allocations. To fix the leak, only allocate resv_map for those inodes which could possibly be associated with page allocations.
--- fs/hugetlbfs/inode.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-)
fs/hugetlbfs/inode.c +14 -6
@@ -745,11 +745,17 @@ static struct inode *hugetlbfs_get_inode(struct super_block *sb, umode_t mode, dev_t dev) {struct inode *inode; -struct resv_map *resv_map; +struct resv_map *resv_map =NULL ; - resv_map =resv_map_alloc (); -if (!resv_map) -return NULL ; +/* +* Reserve maps are only needed for inodes that can have associated +* page allocations. +*/ +if (S_ISREG (mode) ||S_ISLNK (mode)) { + resv_map =resv_map_alloc (); +if (!resv_map) +return NULL ; + } inode =new_inode (sb);if (inode) {
@@ -790,8 +796,10 @@ static struct inode *hugetlbfs_get_inode(struct super_block *sb,break ; }lockdep_annotate_inode_mutex_key (inode); - }else -kref_put (&resv_map->refs, resv_map_release); + }else { +if (resv_map) +kref_put (&resv_map->refs, resv_map_release); + }return inode; }
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 14/15 ARM: orion: don't use using 64-bit DMA masks
In reply to Sasha LevinFrom: Arnd Bergmann <[email protected]>
[ Upstream commit cd92d74d67c811dc22544430b9ac3029f5bd64c5 ]
clang warns about statically defined DMA masks from the DMA_BIT_MASK macro with length 64:
arch/arm/plat-orion/common.c:625:29: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
.coherent_dma_mask = DMA_BIT_MASK(64),
^~~~~~~~~~~~~~~~include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK'
#define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
The ones in orion shouldn't really be 64 bit masks, so changing them to what the driver can support avoids the warning.
--- arch/arm/plat-orion/common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/plat-orion/common.c +2 -2
@@ -645,7 +645,7 @@ static struct platform_device orion_xor0_shared = { .resource = orion_xor0_shared_resources, .dev = { .dma_mask = &orion_xor_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &orion_xor0_pdata, }, };
@@ -706,7 +706,7 @@ static struct platform_device orion_xor1_shared = { .resource = orion_xor1_shared_resources, .dev = { .dma_mask = &orion_xor_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &orion_xor1_pdata, }, };
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 13/15 xsysace: Fix error handling in ace_setup
In reply to Sasha LevinFrom: Guenter Roeck <[email protected]>
[ Upstream commit 47b16820c490149c2923e8474048f2c6e7557cab ]
If xace hardware reports a bad version number, the error handling code in ace_setup() calls put_disk(), followed by queue cleanup. However, since the disk data structure has the queue pointer set, put_disk() also cleans and releases the queue. This results in blk_cleanup_queue() accessing an already released data structure, which in turn may result in a crash such as the following.
[ 10.681671] BUG: Kernel NULL pointer dereference at 0x00000040 [ 10.681826] Faulting instruction address: 0xc0431480 [ 10.682072] Oops: Kernel access of bad area, sig: 11 [#1] [ 10.682251] BE PAGE_SIZE=4K PREEMPT Xilinx Virtex440 [ 10.682387] Modules linked in: [ 10.682528] CPU: 0 PID: 1 Comm: swapper Tainted: G W 5.0.0-rc6-next-20190218+ #2 [ 10.682733] NIP: c0431480 LR: c043147c CTR: c0422ad8 [ 10.682863] REGS: cf82fbe0 TRAP: 0300 Tainted: G W (5.0.0-rc6-next-20190218+) [ 10.683065] MSR: 00029000 <CE,EE,ME> CR: 22000222 XER: 00000000 [ 10.683236] DEAR: 00000040 ESR: 00000000 [ 10.683236] GPR00: c043147c cf82fc90 cf82ccc0 00000000 00000000 00000000 00000002 00000000 [ 10.683236] GPR08: 00000000 00000000 c04310bc 00000000 22000222 00000000 c0002c54 00000000 [ 10.683236] GPR16: 00000000 00000001 c09aa39c c09021b0 c09021dc 00000007 c0a68c08 00000000 [ 10.683236] GPR24: 00000001 ced6d400 ced6dcf0 c0815d9c 00000000 00000000 00000000 cedf0800 [ 10.684331] NIP [c0431480] blk_mq_run_hw_queue+0x28/0x114 [ 10.684473] LR [c043147c] blk_mq_run_hw_queue+0x24/0x114 [ 10.684602] Call Trace: [ 10.684671] [cf82fc90] [c043147c] blk_mq_run_hw_queue+0x24/0x114 (unreliable) [ 10.684854] [cf82fcc0] [c04315bc] blk_mq_run_hw_queues+0x50/0x7c [ 10.685002] [cf82fce0] [c0422b24] blk_set_queue_dying+0x30/0x68 [ 10.685154] [cf82fcf0] [c0423ec0] blk_cleanup_queue+0x34/0x14c [ 10.685306] [cf82fd10] [c054d73c] ace_probe+0x3dc/0x508 [ 10.685445] [cf82fd50] [c052d740] platform_drv_probe+0x4c/0xb8 [ 10.685592] [cf82fd70] [c052abb0] really_probe+0x20c/0x32c [ 10.685728] [cf82fda0] [c052ae58] driver_probe_device+0x68/0x464 [ 10.685877] [cf82fdc0] [c052b500] device_driver_attach+0xb4/0xe4 [ 10.686024] [cf82fde0] [c052b5dc] __driver_attach+0xac/0xfc [ 10.686161] [cf82fe00] [c0528428] bus_for_each_dev+0x80/0xc0 [ 10.686314] [cf82fe30] [c0529b3c] bus_add_driver+0x144/0x234 [ 10.686457] [cf82fe50] [c052c46c] driver_register+0x88/0x15c [ 10.686610] [cf82fe60] [c09de288] ace_init+0x4c/0xac [ 10.686742] [cf82fe80] [c0002730] do_one_initcall+0xac/0x330 [ 10.686888] [cf82fee0] [c09aafd0] kernel_init_freeable+0x34c/0x478 [ 10.687043] [cf82ff30] [c0002c6c] kernel_init+0x18/0x114 [ 10.687188] [cf82ff40] [c000f2f0] ret_from_kernel_thread+0x14/0x1c [ 10.687349] Instruction dump: [ 10.687435] 3863ffd4 4bfffd70 9421ffd0 7c0802a6 93c10028 7c9e2378 93e1002c 38810008 [ 10.687637] 7c7f1b78 90010034 4bfffc25 813f008c <81290040> 75290100 4182002c 80810008 [ 10.688056] ---[ end trace 13c9ff51d41b9d40 ]---
Fix the problem by setting the disk queue pointer to NULL before calling put_disk(). A more comprehensive fix might be to rearrange the code to check the hardware version before initializing data structures, but I don't know if this would have undesirable side effects, and it would increase the complexity of backporting the fix to older kernels.
--- drivers/block/xsysace.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/block/xsysace.c +2 -0
@@ -1062,6 +1062,8 @@ static int ace_setup(struct ace_device *ace)return 0 ; err_read: +/* prevent double queue cleanup */ + ace->gd->queue =NULL ;put_disk (ace->gd); err_alloc_disk:blk_cleanup_queue (ace->queue);
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 15/15 ARM: iop: don't use using 64-bit DMA masks
In reply to Sasha LevinFrom: Arnd Bergmann <[email protected]>
[ Upstream commit 2125801ccce19249708ca3245d48998e70569ab8 ]
clang warns about statically defined DMA masks from the DMA_BIT_MASK macro with length 64:
arch/arm/mach-iop13xx/setup.c:303:35: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64);
^~~~~~~~~~~~~~~~
include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK'
#define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
^ ~~~The ones in iop shouldn't really be 64 bit masks, so changing them to what the driver can support avoids the warning.
--- arch/arm/mach-iop13xx/setup.c | 8 ++++---- arch/arm/mach-iop13xx/tpmi.c | 10 +++++----- arch/arm/plat-iop/adma.c | 6 +++--- 3 files changed, 12 insertions(+), 12 deletions(-)
arch/arm/mach-iop13xx/setup.c +4 -4
@@ -300,7 +300,7 @@ static struct resource iop13xx_adma_2_resources[] = { } }; -static u64 iop13xx_adma_dmamask =DMA_BIT_MASK (64 ); +static u64 iop13xx_adma_dmamask =DMA_BIT_MASK (32 );static struct iop_adma_platform_data iop13xx_adma_0_data = { .hw_id =0 , .pool_size =PAGE_SIZE ,
@@ -324,7 +324,7 @@ static struct platform_device iop13xx_adma_0_channel = { .resource = iop13xx_adma_0_resources, .dev = { .dma_mask = &iop13xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = (void *) &iop13xx_adma_0_data, }, };
@@ -336,7 +336,7 @@ static struct platform_device iop13xx_adma_1_channel = { .resource = iop13xx_adma_1_resources, .dev = { .dma_mask = &iop13xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = (void *) &iop13xx_adma_1_data, }, };
@@ -348,7 +348,7 @@ static struct platform_device iop13xx_adma_2_channel = { .resource = iop13xx_adma_2_resources, .dev = { .dma_mask = &iop13xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = (void *) &iop13xx_adma_2_data, }, };
arch/arm/mach-iop13xx/tpmi.c +5 -5
@@ -152,7 +152,7 @@ static struct resource iop13xx_tpmi_3_resources[] = { } }; -u64 iop13xx_tpmi_mask =DMA_BIT_MASK (64 ); +u64 iop13xx_tpmi_mask =DMA_BIT_MASK (32 );static struct platform_device iop13xx_tpmi_0_device = { .name ="iop-tpmi" , .id =0 ,
@@ -160,7 +160,7 @@ static struct platform_device iop13xx_tpmi_0_device = { .resource = iop13xx_tpmi_0_resources, .dev = { .dma_mask = &iop13xx_tpmi_mask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), }, };
@@ -171,7 +171,7 @@ static struct platform_device iop13xx_tpmi_1_device = { .resource = iop13xx_tpmi_1_resources, .dev = { .dma_mask = &iop13xx_tpmi_mask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), }, };
@@ -182,7 +182,7 @@ static struct platform_device iop13xx_tpmi_2_device = { .resource = iop13xx_tpmi_2_resources, .dev = { .dma_mask = &iop13xx_tpmi_mask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), }, };
@@ -193,7 +193,7 @@ static struct platform_device iop13xx_tpmi_3_device = { .resource = iop13xx_tpmi_3_resources, .dev = { .dma_mask = &iop13xx_tpmi_mask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), }, };
arch/arm/plat-iop/adma.c +3 -3
@@ -143,7 +143,7 @@ struct platform_device iop3xx_dma_0_channel = { .resource = iop3xx_dma_0_resources, .dev = { .dma_mask = &iop3xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = (void *) &iop3xx_dma_0_data, }, };
@@ -155,7 +155,7 @@ struct platform_device iop3xx_dma_1_channel = { .resource = iop3xx_dma_1_resources, .dev = { .dma_mask = &iop3xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = (void *) &iop3xx_dma_1_data, }, };
@@ -167,7 +167,7 @@ struct platform_device iop3xx_aau_channel = { .resource = iop3xx_aau_resources, .dev = { .dma_mask = &iop3xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = (void *) &iop3xx_aau_data, }, };
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 4/15 bonding: show full hw address in sysfs for slave entries
In reply to Sasha LevinFrom: Konstantin Khorenko <[email protected]>
[ Upstream commit 18bebc6dd3281955240062655a4df35eef2c46b3 ]
Bond expects ethernet hwaddr for its slave, but it can be longer than 6 bytes - infiniband interface for example.
# cat /sys/devices/<skipped>/net/ib0/address 80:00:02:08:fe:80:00:00:00:00:00:00:7c:fe:90:03:00:be:5d:e1
# cat /sys/devices/<skipped>/net/ib0/bonding_slave/perm_hwaddr 80:00:02:08:fe:80
So print full hwaddr in sysfs "bonding_slave/perm_hwaddr" as well.
--- drivers/net/bonding/bond_sysfs_slave.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/bonding/bond_sysfs_slave.c +3 -1
@@ -55,7 +55,9 @@ static SLAVE_ATTR_RO(link_failure_count);static ssize_t perm_hwaddr_show (struct slave *slave,char *buf) { -return sprintf (buf,"%pM\n" , slave->perm_hwaddr); +return sprintf (buf,"%*phC\n" , + slave->dev->addr_len, + slave->perm_hwaddr); }static SLAVE_ATTR_RO (perm_hwaddr);
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 2/15 rtc: sh: Fix invalid alarm warning for non-enabled alarm
In reply to Sasha LevinFrom: Geert Uytterhoeven <[email protected]>
[ Upstream commit 15d82d22498784966df8e4696174a16b02cc1052 ]
When no alarm has been programmed on RSK-RZA1, an error message is printed during boot:
rtc rtc0: invalid alarm value: 2019-03-14T255:255:255
sh_rtc_read_alarm_value() returns 0xff when querying a hardware alarm field that is not enabled. __rtc_read_alarm() validates the received alarm values, and fills in missing fields when needed.
While 0xff is handled fine for the year, month, and day fields, and corrected as considered being out-of-range, this is not the case for the hour, minute, and second fields, where -1 is expected for missing fields.
Fix this by returning -1 instead, as this value is handled fine for all fields.
--- drivers/rtc/rtc-sh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/rtc/rtc-sh.c +1 -1
@@ -455,7 +455,7 @@ static int sh_rtc_set_time(struct device *dev, struct rtc_time *tm)static inline int sh_rtc_read_alarm_value (struct sh_rtc *rtc,int reg_off) {unsigned int byte; -int value =0xff ;/* return 0xff for ignored values */ +int value =-1 ;/* return -1 for ignored values */ byte =readb (rtc->regbase + reg_off);if (byte &AR_ENB ) {
Signature · 1 line
2.19.1