Skip to contentSkip to conversation

armv7R: dts: k3: am654: Switch DMSC TX message thread ID

PATCH New Andreas Dannenberg 3 participants 3 messages Apr 25, 2019 – May 3, 2019 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 armv7R: dts: k3: am654: Switch DMSC TX message thread ID

Switch from using the high priority DMSC transmit message queue used by the secure R5 MCU island boot context to the low priority message queue. While the change in priority is irrelevant for the current boot architecture it however gives us access to a deeper message queue that will allow us to buffer more messages. This is an important aspect when sending several messages without requesting and waiting for a response in a row which is a communication scheme used during core shutdown for example. See AM654 TISCI User Guide for additional details.

---
 arch/arm/dts/k3-am654-r5-base-board.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/dts/k3-am654-r5-base-board.dts +1 -1
index 081a2eceb2..72039ac870 100644
@@ -99,7 +99,7 @@
 };
 
 &dmsc {
-	mboxes= <&mcu_secproxy 7>, <&mcu_secproxy 6>, <&mcu_secproxy 5>;
+	mboxes= <&mcu_secproxy 8>, <&mcu_secproxy 6>, <&mcu_secproxy 5>;
 	mbox-names = "tx", "rx", "notify";
 	ti,host-id = <4>;
 	ti,secure-host;
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/1 armv7R: dts: k3: am654: Switch DMSC TX message thread ID

Quoted 10 lines · Andreas Dannenberg

Switch from using the high priority DMSC transmit message queue used by the secure R5 MCU island boot context to the low priority message queue. While the change in priority is irrelevant for the current boot architecture it however gives us access to a deeper message queue that will allow us to buffer more messages. This is an important aspect when sending several messages without requesting and waiting for a response in a row which is a communication scheme used during core shutdown for example. See AM654 TISCI User Guide for additional details.

Thanks and regards,
Lokesh

#2 lore raw

PATCH 1/1 armv7R: dts: k3: am654: Switch DMSC TX message thread ID

In reply to Andreas Dannenberg
Quoted 11 lines · Andreas Dannenberg

Switch from using the high priority DMSC transmit message queue used by the secure R5 MCU island boot context to the low priority message queue. While the change in priority is irrelevant for the current boot architecture it however gives us access to a deeper message queue that will allow us to buffer more messages. This is an important aspect when sending several messages without requesting and waiting for a response in a row which is a communication scheme used during core shutdown for example. See AM654 TISCI User Guide for additional details.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190503/eb1a7f8e/attachment.sig>