Skip to contentSkip to conversation

dt-bindings: misc: aspeed-p2a-ctrl: add support

PATCH Patrick Venture 1 participant 1 message Apr 25, 2019 2 messages not in the archive

lore
Share & tools
lore
#2 lore raw
In reply to a message not in the archive
Quoted 75 lines · Patrick Venture

+OpenBMC Maillist

Quoted 67 lines · Patrick Venture

Document the ast2400, ast2500 PCI-to-AHB bridge control driver bindings.

(cherry picked from commit 28703c6ef6228635f7c8b248c1d846511a2b60a3)
---
 .../bindings/misc/aspeed-p2a-ctrl.txt         | 47 +++++++++++++++++++
 1 file changed, 47 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +47 -1
new file mode 100644
index 000000000000..854bd67ffec6
@@ -0,0 +1,47 @@
+======================================================================
+Device tree bindings for Aspeed AST2400/AST2500 PCI-to-AHB Bridge Control Driver
+======================================================================
+
+The bridge is available on platforms with the VGA enabled on the Aspeed device.
+In this case, the host has access to a 64KiB window into all of the BMC's
+memory.  The BMC can disable this bridge.  If the bridge is enabled, the host
+has read access to all the regions of memory, however the host only has read
+and write access depending on a register controlled by the BMC.
+
+Required properties:
+===================
+
+ - compatible: must be one of:
+       - "aspeed,ast2400-p2a-ctrl"
+       - "aspeed,ast2500-p2a-ctrl"
+
+Optional properties:
+===================
+
+- memory-region: A phandle to a reserved_memory region to be used for the PCI
+               to AHB mapping
+
+The p2a-control node should be the child of a syscon node with the required
+property:
+
+- compatible : Should be one of the following:
+               "aspeed,ast2400-scu", "syscon", "simple-mfd"
+               "aspeed,g4-scu", "syscon", "simple-mfd"
+               "aspeed,ast2500-scu", "syscon", "simple-mfd"
+               "aspeed,g5-scu", "syscon", "simple-mfd"
+
+Example
+===================
+
+g4 Example
+----------
+
+syscon: scu@1e6e2000 {
+       compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
+       reg = <0x1e6e2000 0x1a8>;
+
+       p2a: p2a-control {
+               compatible = "aspeed,ast2400-p2a-ctrl";
+               memory-region = <&reserved_memory>;
+       };
+};
--
Quoted 2 lines

2.21.0.593.g511ec345e18-goog

--suppress-cc=all really meant all.