Skip to contentSkip to conversation

PCI/LINK: Add Kconfig option (default off)

PATCH Superseded Keith Busch 3 participants 3 messages May 1, 2019 PCI

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 PCI/LINK: Add Kconfig option (default off)

e8303bb7a75c ("PCI/LINK: Report degraded links via link bandwidth notification") added dmesg logging whenever a link changes speed or width to a state that is considered degraded. Unfortunately, it cannot differentiate signal integrity-related link changes from those intentionally initiated by an endpoint driver, including drivers that may live in userspace or VMs when making use of vfio-pci. Some GPU drivers actively manage the link state to save power, which generates a stream of messages like this:

vfio-pci 0000:07:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:02.0 (capable of 64.000 Gb/s with 5 GT/s x16 link)

Since we can't distinguish the intentional changes from the signal integrity issues, leave the reporting turned off by default. Add a Kconfig option to turn it on if desired.

Fixes e8303bb7a75c ("PCI/LINK: Report degraded links via link bandwidth notification")
---
 drivers/pci/pcie/Kconfig   | 9 +++++++++
 drivers/pci/pcie/Makefile  | 2 +-
 drivers/pci/pcie/portdrv.h | 4 ++++
 3 files changed, 14 insertions(+), 1 deletion(-)
drivers/pci/pcie/Kconfig +9 -0
index 5cbdbca904ac..7f480685df93 100644
@@ -142,3 +142,12 @@ config PCIE_PTM
 
 	  This is only useful if you have devices that support PTM, but it
 	  is safe to enable even if you don't.
+
+config PCIE_BW
+	bool "PCI Express Bandwidth Change Notification"
+	default n
+	depends on PCIEPORTBUS
+	help
+	  This enables PCI Express Bandwidth Change Notification. If
+	  you know link width or rate changes occur only to correct
+	  unreliable links, you may answer Y.
drivers/pci/pcie/Makefile +1 -1
index f1d7bc1e5efa..efb9d2e71e9e 100644
@@ -3,7 +3,6 @@
 # Makefile for PCI Express features and port driver
 
 pcieportdrv-y			:= portdrv_core.o portdrv_pci.o err.o
-pcieportdrv-y			+= bw_notification.o
 
 obj-$(CONFIG_PCIEPORTBUS)	+= pcieportdrv.o
 
@@ -13,3 +12,4 @@ obj-$(CONFIG_PCIEAER_INJECT)	+= aer_inject.o
 obj-$(CONFIG_PCIE_PME)		+= pme.o
 obj-$(CONFIG_PCIE_DPC)		+= dpc.o
 obj-$(CONFIG_PCIE_PTM)		+= ptm.o
+obj-$(CONFIG_PCIE_BW)		+= bw_notification.o
drivers/pci/pcie/portdrv.h +4 -0
index 1d50dc58ac40..944827a8c7d3 100644
@@ -49,7 +49,11 @@ int pcie_dpc_init(void);
 static inline int pcie_dpc_init(void) { return 0; }
 #endif
 
+#ifdef CONFIG_PCIE_BW
 int pcie_bandwidth_notification_init(void);
+#else
+static inline int pcie_bandwidth_notification_init(void) { return 0; }
+#endif
 
 /* Port Type */
 #define PCIE_ANY_PORT			(~0)
Signature · 1 line
2.14.4
#1 lore raw

drivers/pci/pcie/Kconfig config PCIE_PTM · line 148

Quoted 3 lines · Keith Busch
drivers/pci/pcie/Kconfig +3 -0
+config PCIE_BW
+	bool "PCI Express Bandwidth Change Notification"
+	default n

n is the default default, no need to add it manually.

#2 lore raw
Quoted 6 lines · Christoph Hellwig

drivers/pci/pcie/Kconfig config PCIE_PTM · line 148

Quoted 3 lines · Keith Busch
drivers/pci/pcie/Kconfig +3 -0
+config PCIE_BW
+	bool "PCI Express Bandwidth Change Notification"
+	default n

n is the default default, no need to add it manually.

So extra credit for going beyond the bare minimum?!

... sending v2.