Allwinner H6 Mali GPU support
v4 cover Allwinner H6 Mali GPU support
From: Clément Péron <[email protected]>
Hi,
The Allwinner H6 has a Mali-T720 MP2. The drivers are out-of-tree so this series only introduce the dt-bindings.
The first patch is from Neil Amstrong and has been already merged in linux-amlogic. It is required for this series.
The second patch is from Icenowy Zheng where I changed the order has required by Rob Herring.
See: https://patchwork.kernel.org/patch/10699829/
Thanks,
Clément
Changes in v4:
- Add Rob Herring reviewed-by tag
- Resent with correct Maintainers
Changes in v3 (Thanks to Maxime Ripard):
- Reauthor Icenowy for her patch
Changes in v2 (Thanks to Maxime Ripard):
- Drop GPU OPP Table
- Add clocks and clock-names in required
Clément Péron (6):
dt-bindings: gpu: mali-midgard: Add H6 mali gpu compatible
arm64: dts: allwinner: Add ARM Mali GPU node for H6
arm64: dts: allwinner: Add mali GPU supply for Pine H64
arm64: dts: allwinner: Add mali GPU supply for Beelink GS1
arm64: dts: allwinner: Add mali GPU supply for OrangePi Boards
arm64: dts: allwinner: Add mali GPU supply for OrangePi 3
Icenowy Zheng (1):
dt-bindings: gpu: add bus clock for Mali Midgard GPUs
Neil Armstrong (1):
dt-bindings: gpu: mali-midgard: Add resets property
.../bindings/gpu/arm,mali-midgard.txt | 27 +++++++++++++++++++ .../dts/allwinner/sun50i-h6-beelink-gs1.dts | 5 ++++ .../dts/allwinner/sun50i-h6-orangepi-3.dts | 5 ++++ .../dts/allwinner/sun50i-h6-orangepi.dtsi | 5 ++++ .../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 5 ++++ arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 14 ++++++++++ 6 files changed, 61 insertions(+)
Signature · 7 lines
2.17.1 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/[email protected] To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20190512174608.10083-1-peron.clem%40gmail.com. For more options, visit https://groups.google.com/d/optout.
PATCH v4 1/8 dt-bindings: gpu: mali-midgard: Add resets property
From: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/[email protected]>
The Amlogic ARM Mali Midgard requires reset controls to power on and software reset the GPU, adds these as optional in the bindings.
--- .../devicetree/bindings/gpu/arm,mali-midgard.txt | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt +14 -0
@@ -37,6 +37,20 @@ Optional properties: - operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt for details. +- resets : Phandle of the GPU reset line. + +Vendor-specific bindings +------------------------ + +The Mali GPU is integrated very differently from one SoC to +another. In order to accomodate those differences, you have the option +to specify one more vendor-specific compatible, among: + +- "amlogic,meson-gxm-mali" + Required properties: + - resets : Should contain phandles of : + + GPU reset line + + GPU APB glue reset line Example for a Mali-T760:
Signature · 1 line
2.17.1
PATCH v4 2/8 dt-bindings: gpu: add bus clock for Mali Midgard GPUs
In reply to [email protected]From: Icenowy Zheng <[email protected]>
Some SoCs adds a bus clock gate to the Mali Midgard GPU.
Add the binding for the bus clock.
--- Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt | 6 ++++++ 1 file changed, 6 insertions(+)
Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt +6 -0
@@ -31,6 +31,12 @@ Optional properties: - clocks : Phandle to clock for the Mali Midgard device. +- clock-names : Specify the names of the clocks specified in clocks + when multiple clocks are present. + * core: clock driving the GPU itself (When only one clock is present, + assume it's this clock.) + * bus: bus clock for the GPU + - mali-supply : Phandle to regulator for the Mali device. Refer to Documentation/devicetree/bindings/regulator/regulator.txt for details.
Signature · 7 lines
2.17.1 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/[email protected] To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20190512174608.10083-3-peron.clem%40gmail.com. For more options, visit https://groups.google.com/d/optout.
PATCH v4 3/8 dt-bindings: gpu: mali-midgard: Add H6 mali gpu compatible
In reply to [email protected]From: Clément Péron <[email protected]>
This add the H6 mali compatible in the dt-bindings to later support specific implementation.
--- .../devicetree/bindings/gpu/arm,mali-midgard.txt | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt +8 -1
@@ -15,6 +15,7 @@ Required properties: + "arm,mali-t860" + "arm,mali-t880" * which must be preceded by one of the following vendor specifics: + + "allwinner,sun50i-h6-mali" + "amlogic,meson-gxm-mali" + "rockchip,rk3288-mali" + "rockchip,rk3399-mali"
@@ -49,9 +50,15 @@ Vendor-specific bindings ------------------------ The Mali GPU is integrated very differently from one SoC to -another. In order to accomodate those differences, you have the option +another. In order to accommodate those differences, you have the option to specify one more vendor-specific compatible, among: +- "allwinner,sun50i-h6-mali" + Required properties: + - clocks : phandles to core and bus clocks + - clock-names : must contain "core" and "bus" + - resets: phandle to GPU reset line + - "amlogic,meson-gxm-mali" Required properties: - resets : Should contain phandles of :
Signature · 7 lines
2.17.1 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/[email protected] To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20190512174608.10083-4-peron.clem%40gmail.com. For more options, visit https://groups.google.com/d/optout.
PATCH v4 4/8 arm64: dts: allwinner: Add ARM Mali GPU node for H6
In reply to [email protected]From: Clément Péron <[email protected]>
Add the mali gpu node to the H6 device-tree.
--- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +14 -0
@@ -157,6 +157,20 @@ allwinner,sram = <&ve_sram 1>; }; + gpu: gpu@1800000 { + compatible = "allwinner,sun50i-h6-mali", + "arm,mali-t720"; + reg = <0x01800000 0x4000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>; + clock-names = "core", "bus"; + resets = <&ccu RST_BUS_GPU>; + status = "disabled"; + }; + syscon: syscon@3000000 { compatible = "allwinner,sun50i-h6-system-control", "allwinner,sun50i-a64-system-control";
Signature · 7 lines
2.17.1 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/[email protected] To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20190512174608.10083-5-peron.clem%40gmail.com. For more options, visit https://groups.google.com/d/optout.
PATCH v4 5/8 arm64: dts: allwinner: Add mali GPU supply for Pine H64
In reply to [email protected]From: Clément Péron <[email protected]>
Enable and add supply to the Mali GPU node on the
Pine H64 board.
--- arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +5 -0
@@ -85,6 +85,11 @@ status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + &hdmi { status = "okay"; };
Signature · 7 lines
2.17.1 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/[email protected] To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20190512174608.10083-6-peron.clem%40gmail.com. For more options, visit https://groups.google.com/d/optout.
PATCH v4 6/8 arm64: dts: allwinner: Add mali GPU supply for Beelink GS1
In reply to [email protected]From: Clément Péron <[email protected]>
Enable and add supply to the Mali GPU node on the
Beelink GS1 board.
--- arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts +5 -0
@@ -70,6 +70,11 @@ status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + &hdmi { status = "okay"; };
Signature · 7 lines
2.17.1 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/[email protected] To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20190512174608.10083-7-peron.clem%40gmail.com. For more options, visit https://groups.google.com/d/optout.
PATCH v4 7/8 arm64: dts: allwinner: Add mali GPU supply for OrangePi Boards
In reply to [email protected]From: Clément Péron <[email protected]>
Enable and add supply to the Mali GPU node on the
Orange Pi One Plus and Lite2 boards.
--- arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi +5 -0
@@ -55,6 +55,11 @@ status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + &mmc0 { vmmc-supply = <®_cldo1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
Signature · 7 lines
2.17.1 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/[email protected] To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20190512174608.10083-8-peron.clem%40gmail.com. For more options, visit https://groups.google.com/d/optout.
PATCH v4 8/8 arm64: dts: allwinner: Add mali GPU supply for OrangePi 3
In reply to [email protected]From: Clément Péron <[email protected]>
Enable and add supply to the Mali GPU node on the
Orange Pi 3 board.
--- arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts +5 -0
@@ -58,6 +58,11 @@ status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + &mmc0 { vmmc-supply = <®_cldo1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
Signature · 7 lines
2.17.1 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/[email protected] To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20190512174608.10083-9-peron.clem%40gmail.com. For more options, visit https://groups.google.com/d/optout.
Re: [linux-sunxi] [PATCH v4 5/8] arm64: dts: allwinner: Add mali GPU supply for Pine H64
In reply to [email protected]Quoted 16 lines · On Sun, May 12, 2019 at 11:16 PM <[email protected]…
From: Clément Péron <[email protected]>
Enable and add supply to the Mali GPU node on the
Pine H64 board.Signed-off-by Clément Péron <[email protected]>--- arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 5 +++++ 1 file changed, 5 insertions(+)arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +0
-0
arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts line 91
Quoted 7 lines
arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +4
-0@@ -85,6 +85,11 @@ status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +};
I think we can squash all these board dts changes into single patch.
Signature · 4 lines
You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/[email protected] To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/CAMty3ZBTO9%2B9HLikR8%3DKgWZQBp%2B1yVgxQ_rD-E8WeJ8VvpuAcA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
Quoted 6 lines · On Sun, May 12, 2019 at 07:46:00PM +0200, [email protected] wrote:
From: Clément Péron <[email protected]>
Hi,
The Allwinner H6 has a Mali-T720 MP2. The drivers are out-of-tree so this series only introduce the dt-bindings.
We do have an in-tree midgard driver now (since 5.2). Does this stuff work together with your dt changes here?
-Daniel
Quoted 46 lines
The first patch is from Neil Amstrong and has been already merged in linux-amlogic. It is required for this series.
The second patch is from Icenowy Zheng where I changed the order has required by Rob Herring.
See: https://patchwork.kernel.org/patch/10699829/Thanks,
ClémentChanges in v4:
- Add Rob Herring reviewed-by tag
- Resent with correct MaintainersChanges in v3 (Thanks to Maxime Ripard):
- Reauthor Icenowy for her patchChanges in v2 (Thanks to Maxime Ripard):
- Drop GPU OPP Table
- Add clocks and clock-names in requiredClément Péron (6):
dt-bindings: gpu: mali-midgard: Add H6 mali gpu compatible
arm64: dts: allwinner: Add ARM Mali GPU node for H6
arm64: dts: allwinner: Add mali GPU supply for Pine H64
arm64: dts: allwinner: Add mali GPU supply for Beelink GS1
arm64: dts: allwinner: Add mali GPU supply for OrangePi Boards
arm64: dts: allwinner: Add mali GPU supply for OrangePi 3Icenowy Zheng (1):
dt-bindings: gpu: add bus clock for Mali Midgard GPUsNeil Armstrong (1):
dt-bindings: gpu: mali-midgard: Add resets property.../bindings/gpu/arm,mali-midgard.txt | 27 +++++++++++++++++++ .../dts/allwinner/sun50i-h6-beelink-gs1.dts | 5 ++++ .../dts/allwinner/sun50i-h6-orangepi-3.dts | 5 ++++ .../dts/allwinner/sun50i-h6-orangepi.dtsi | 5 ++++ .../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 5 ++++ arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 14 ++++++++++ 6 files changed, 61 insertions(+)Signature · 1 line
2.17.1
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch
Re: [linux-sunxi] [PATCH v4 5/8] arm64: dts: allwinner: Add mali GPU supply for Pine H64
In reply to Jagan TekiQuoted 21 lines · Jagan Teki
Quoted 19 lines · On Sun, May 12, 2019 at 11:16 PM <[email protected]…
From: Clément Péron <[email protected]>
Enable and add supply to the Mali GPU node on the
Pine H64 board.Signed-off-by Clément Péron <[email protected]>--- arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 5 +++++ 1 file changed, 5 insertions(+)arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +0
-0@@ -85,6 +85,11 @@ status = "okay"; };
Quoted 6 lines
arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts line 91
Quoted 4 lines
arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +4
-0+&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +};I think we can squash all these board dts changes into single patch.
Yes. Please do so for all patches with the same changes applied to different boards, and authored by the same person.
ChenYu
Signature · 4 lines
You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/[email protected] To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/CAGb2v64QpH2uL3Q2%3DePEaYhrB1_J5uNT4VnBssBgwbOB0NDD0Q%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
Hi,
Quoted 10 lines · Daniel Vetter
Quoted 6 lines · On Sun, May 12, 2019 at 07:46:00PM +0200, [email protected] wrote:
From: Clément Péron <[email protected]>
Hi,
The Allwinner H6 has a Mali-T720 MP2. The drivers are out-of-tree so this series only introduce the dt-bindings.
We do have an in-tree midgard driver now (since 5.2). Does this stuff work together with your dt changes here?
No, but it should be easy to add.
Clément, no need to resend the first patch, it's now on linus master.
Could you also add support for the bus clock in panfrost in the same patchset since it's also on master now ?
Neil
Quoted 49 lines
-Daniel
Quoted 46 lines
The first patch is from Neil Amstrong and has been already merged in linux-amlogic. It is required for this series.
The second patch is from Icenowy Zheng where I changed the order has required by Rob Herring.
See: https://patchwork.kernel.org/patch/10699829/Thanks,
ClémentChanges in v4:
- Add Rob Herring reviewed-by tag
- Resent with correct MaintainersChanges in v3 (Thanks to Maxime Ripard):
- Reauthor Icenowy for her patchChanges in v2 (Thanks to Maxime Ripard):
- Drop GPU OPP Table
- Add clocks and clock-names in requiredClément Péron (6):
dt-bindings: gpu: mali-midgard: Add H6 mali gpu compatible
arm64: dts: allwinner: Add ARM Mali GPU node for H6
arm64: dts: allwinner: Add mali GPU supply for Pine H64
arm64: dts: allwinner: Add mali GPU supply for Beelink GS1
arm64: dts: allwinner: Add mali GPU supply for OrangePi Boards
arm64: dts: allwinner: Add mali GPU supply for OrangePi 3Icenowy Zheng (1):
dt-bindings: gpu: add bus clock for Mali Midgard GPUsNeil Armstrong (1):
dt-bindings: gpu: mali-midgard: Add resets property.../bindings/gpu/arm,mali-midgard.txt | 27 +++++++++++++++++++ .../dts/allwinner/sun50i-h6-beelink-gs1.dts | 5 ++++ .../dts/allwinner/sun50i-h6-orangepi-3.dts | 5 ++++ .../dts/allwinner/sun50i-h6-orangepi.dtsi | 5 ++++ .../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 5 ++++ arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 14 ++++++++++ 6 files changed, 61 insertions(+)Signature · 1 line
2.17.1
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi,
Quoted 9 lines · Neil Armstrong
Hi,
Quoted 5 lines · Daniel Vetter
Quoted 4 lines · On Sun, May 12, 2019 at 07:46:00PM +0200, [email protected] wrote:
From: Clément Péron <[email protected]>
Hi,
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
The Allwinner H6 has a Mali-T720 MP2. The drivers are out-of-tree so this series only introduce the dt-bindings.
We do have an in-tree midgard driver now (since 5.2). Does this stuff work together with your dt changes here?
No, but it should be easy to add.
I will give it a try and let you know.
Quoted 3 lines
Clément, no need to resend the first patch, it's now on linus master.
Ok
Thanks,
Clement
Quoted 56 lines
Could you also add support for the bus clock in panfrost in the same patchset since it's also on master now ?
Neil
Quoted 49 lines
-Daniel
Quoted 46 lines
The first patch is from Neil Amstrong and has been already merged in linux-amlogic. It is required for this series.
The second patch is from Icenowy Zheng where I changed the order has required by Rob Herring.
See: https://patchwork.kernel.org/patch/10699829/Thanks,
ClémentChanges in v4:
- Add Rob Herring reviewed-by tag
- Resent with correct MaintainersChanges in v3 (Thanks to Maxime Ripard):
- Reauthor Icenowy for her patchChanges in v2 (Thanks to Maxime Ripard):
- Drop GPU OPP Table
- Add clocks and clock-names in requiredClément Péron (6):
dt-bindings: gpu: mali-midgard: Add H6 mali gpu compatible
arm64: dts: allwinner: Add ARM Mali GPU node for H6
arm64: dts: allwinner: Add mali GPU supply for Pine H64
arm64: dts: allwinner: Add mali GPU supply for Beelink GS1
arm64: dts: allwinner: Add mali GPU supply for OrangePi Boards
arm64: dts: allwinner: Add mali GPU supply for OrangePi 3Icenowy Zheng (1):
dt-bindings: gpu: add bus clock for Mali Midgard GPUsNeil Armstrong (1):
dt-bindings: gpu: mali-midgard: Add resets property.../bindings/gpu/arm,mali-midgard.txt | 27 +++++++++++++++++++ .../dts/allwinner/sun50i-h6-beelink-gs1.dts | 5 ++++ .../dts/allwinner/sun50i-h6-orangepi-3.dts | 5 ++++ .../dts/allwinner/sun50i-h6-orangepi.dtsi | 5 ++++ .../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 5 ++++ arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 14 ++++++++++ 6 files changed, 61 insertions(+)--
2.17.1
Re: [linux-sunxi] [PATCH v4 5/8] arm64: dts: allwinner: Add mali GPU supply for Pine H64
In reply to Chen-Yu TsaiHi Jagan, Chen-Yu,
Quoted 30 lines · Chen-Yu Tsai
Quoted 21 lines · Jagan Teki
Quoted 19 lines · On Sun, May 12, 2019 at 11:16 PM <[email protected]…
From: Clément Péron <[email protected]>
Enable and add supply to the Mali GPU node on the
Pine H64 board.Signed-off-by Clément Péron <[email protected]>--- arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 5 +++++ 1 file changed, 5 insertions(+)arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +0
-0@@ -85,6 +85,11 @@ status = "okay"; };Quoted 6 lines
arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts line 91
Quoted 4 lines
arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +4
-0+&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +};I think we can squash all these board dts changes into single patch.
Quoted 2 lines
Yes. Please do so for all patches with the same changes applied to different boards, and authored by the same person.
I thought it was required to have "smallest" patch as possible. And it's also better for tracking "Tested-by" tag.
I will squash them in the next version.
Thanks,
Clement
Quoted 2 lines
ChenYu
Signature · 4 lines
You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/[email protected] To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/CAJiuCccZvk_rHmh4Trt%2B1uG0APu886Zp_DvUwGcMkph0U0biAA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
Hi,
Quoted 13 lines · Clément Péron
Hi,
Quoted 9 lines · Neil Armstrong
Hi,
Quoted 5 lines · Daniel Vetter
Quoted 4 lines · On Sun, May 12, 2019 at 07:46:00PM +0200…
From: Clément Péron <[email protected]>
Hi,
Quoted 8 lines
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
The Allwinner H6 has a Mali-T720 MP2. The drivers are out-of-tree so this series only introduce the dt-bindings.
We do have an in-tree midgard driver now (since 5.2). Does this stuff work together with your dt changes here?
No, but it should be easy to add.
I will give it a try and let you know.
Added the bus_clock and a ramp delay to the gpu_vdd but the driver fail at probe.
[ 3.052919] panfrost 1800000.gpu: clock rate = 432000000 [ 3.058278] panfrost 1800000.gpu: bus_clock rate = 100000000 [ 3.179772] panfrost 1800000.gpu: mali-t720 id 0x720 major 0x1 minor 0x1 status 0x0 [ 3.187432] panfrost 1800000.gpu: features: 00000000,10309e40, issues: 00000000,21054400 [ 3.195531] panfrost 1800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xf JS:0x7 [ 3.207178] panfrost 1800000.gpu: shader_present=0x3 l2_present=0x1 [ 3.238257] panfrost 1800000.gpu: Fatal error during GPU init [ 3.244165] panfrost: probe of 1800000.gpu failed with error -12
The ENOMEM is coming from "panfrost_mmu_init" alloc_io_pgtable_ops(ARM_MALI_LPAE, &pfdev->mmu->pgtbl_cfg,
pfdev);
Which is due to a check in the pgtable alloc "cfg->ias != 48" arm-lpae io-pgtable: arm_mali_lpae_alloc_pgtable cfg->ias 33 cfg->oas 40
DRI stack is totally new for me, could you give me a little clue about this issue ?
Thanks,
Clément
Quoted 65 lines
Quoted 4 lines
Clément, no need to resend the first patch, it's now on linus master.
Ok
Thanks,
ClementQuoted 56 lines
Could you also add support for the bus clock in panfrost in the same patchset since it's also on master now ?
Neil
Quoted 49 lines
-Daniel
Quoted 46 lines
The first patch is from Neil Amstrong and has been already merged in linux-amlogic. It is required for this series.
The second patch is from Icenowy Zheng where I changed the order has required by Rob Herring.
See: https://patchwork.kernel.org/patch/10699829/Thanks,
ClémentChanges in v4:
- Add Rob Herring reviewed-by tag
- Resent with correct MaintainersChanges in v3 (Thanks to Maxime Ripard):
- Reauthor Icenowy for her patchChanges in v2 (Thanks to Maxime Ripard):
- Drop GPU OPP Table
- Add clocks and clock-names in requiredClément Péron (6):
dt-bindings: gpu: mali-midgard: Add H6 mali gpu compatible
arm64: dts: allwinner: Add ARM Mali GPU node for H6
arm64: dts: allwinner: Add mali GPU supply for Pine H64
arm64: dts: allwinner: Add mali GPU supply for Beelink GS1
arm64: dts: allwinner: Add mali GPU supply for OrangePi Boards
arm64: dts: allwinner: Add mali GPU supply for OrangePi 3Icenowy Zheng (1):
dt-bindings: gpu: add bus clock for Mali Midgard GPUsNeil Armstrong (1):
dt-bindings: gpu: mali-midgard: Add resets property.../bindings/gpu/arm,mali-midgard.txt | 27 +++++++++++++++++++ .../dts/allwinner/sun50i-h6-beelink-gs1.dts | 5 ++++ .../dts/allwinner/sun50i-h6-orangepi-3.dts | 5 ++++ .../dts/allwinner/sun50i-h6-orangepi.dtsi | 5 ++++ .../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 5 ++++ arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 14 ++++++++++ 6 files changed, 61 insertions(+)--
2.17.1
Signature · 4 lines
You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/[email protected] To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/CAJiuCccWa5UTML68JDQq6q8SyNZzVWwQWTOL%3D%2B84Bh4EMHGC3A%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
Quoted 42 lines · Clément Péron
Hi,
Quoted 13 lines · Clément Péron
Hi,
Quoted 9 lines · Neil Armstrong
Hi,
Quoted 5 lines · Daniel Vetter
Quoted 4 lines · On Sun, May 12, 2019 at 07:46:00PM +0200…
From: Clément Péron <[email protected]>
Hi,
Quoted 8 lines
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
The Allwinner H6 has a Mali-T720 MP2. The drivers are out-of-tree so this series only introduce the dt-bindings.
We do have an in-tree midgard driver now (since 5.2). Does this stuff work together with your dt changes here?
No, but it should be easy to add.
I will give it a try and let you know.
Added the
bus_clockand a ramp delay to thegpu_vddbut the driver fail at probe.[ 3.052919] panfrost 1800000.gpu: clock rate = 432000000 [ 3.058278] panfrost 1800000.gpu: bus_clock rate = 100000000 [ 3.179772] panfrost 1800000.gpu: mali-t720 id 0x720 major 0x1 minor 0x1 status 0x0 [ 3.187432] panfrost 1800000.gpu: features: 00000000,10309e40, issues: 00000000,21054400 [ 3.195531] panfrost 1800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xf JS:0x7 [ 3.207178] panfrost 1800000.gpu: shader_present=0x3 l2_present=0x1 [ 3.238257] panfrost 1800000.gpu: Fatal error during GPU init [ 3.244165] panfrost: probe of 1800000.gpu failed with error -12The ENOMEM is coming from "
panfrost_mmu_init" alloc_io_pgtable_ops(ARM_MALI_LPAE,&pfdev->mmu->pgtbl_cfg,
Quoted 7 lines
pfdev);Which is due to a check in the pgtable alloc "
cfg->ias!= 48" arm-lpae io-pgtable:arm_mali_lpae_alloc_pgtablecfg->ias33cfg->oas40DRI stack is totally new for me, could you give me a little clue about this issue ?
Heh, this is probably the one bit which doesn't really count as "DRI stack".
That's merely a somewhat-conservative sanity check - I'm pretty sure it *should* be fine to change the test to "cfg->ias > 48" (io-pgtable itself ought to cope). You'll just get to be the first to actually test a non-48-bit configuration here :)
Robin.
Signature · 4 lines
You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/[email protected] To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/3c2c9094-69d4-bace-d5ee-c02b7f56ac82%40arm.com. For more options, visit https://groups.google.com/d/optout.
Hi Robin,
Quoted 52 lines · Robin Murphy
Quoted 42 lines · Clément Péron
Hi,
Quoted 13 lines · Clément Péron
Hi,
Quoted 9 lines · Neil Armstrong
Hi,
Quoted 5 lines · Daniel Vetter
Quoted 4 lines · On Sun, May 12, 2019 at 07:46:00PM +0200…
From: Clément Péron <[email protected]>
Hi,
Quoted 8 lines
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
The Allwinner H6 has a Mali-T720 MP2. The drivers are out-of-tree so this series only introduce the dt-bindings.
We do have an in-tree midgard driver now (since 5.2). Does this stuff work together with your dt changes here?
No, but it should be easy to add.
I will give it a try and let you know.
Added the
bus_clockand a ramp delay to thegpu_vddbut the driver fail at probe.[ 3.052919] panfrost 1800000.gpu: clock rate = 432000000 [ 3.058278] panfrost 1800000.gpu: bus_clock rate = 100000000 [ 3.179772] panfrost 1800000.gpu: mali-t720 id 0x720 major 0x1 minor 0x1 status 0x0 [ 3.187432] panfrost 1800000.gpu: features: 00000000,10309e40, issues: 00000000,21054400 [ 3.195531] panfrost 1800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xf JS:0x7 [ 3.207178] panfrost 1800000.gpu: shader_present=0x3 l2_present=0x1 [ 3.238257] panfrost 1800000.gpu: Fatal error during GPU init [ 3.244165] panfrost: probe of 1800000.gpu failed with error -12The ENOMEM is coming from "
panfrost_mmu_init" alloc_io_pgtable_ops(ARM_MALI_LPAE,&pfdev->mmu->pgtbl_cfg,Quoted 7 lines
pfdev);Which is due to a check in the pgtable alloc "
cfg->ias!= 48" arm-lpae io-pgtable:arm_mali_lpae_alloc_pgtablecfg->ias33cfg->oas40DRI stack is totally new for me, could you give me a little clue about this issue ?
Quoted 6 lines
Heh, this is probably the one bit which doesn't really count as "DRI stack".
That's merely a somewhat-conservative sanity check - I'm pretty sure it *should* be fine to change the test to "
cfg->ias> 48" (io-pgtable itself ought to cope). You'll just get to be the first to actually test a non-48-bit configuration here :)
Thanks a lot, the probe seems fine now :)
I try to run glmark2 :
# glmark2-es2-drm
=======================================================
glmark2 2017.07
=======================================================
OpenGL Information
GL_VENDOR: panfrost
GL_RENDERER: panfrost
GL_VERSION: OpenGL ES 2.0 Mesa 19.1.0-rc2
=======================================================
[build] use-vbo=false:But it seems that H6 is not so easy to add :(.
[ 345.204813] panfrost 1800000.gpu: mmu irq status=1 [ 345.209617] panfrost 1800000.gpu: Unhandled Page fault in AS0 at VA 0x0000000002400400 [ 345.209617] Reason: TODO [ 345.209617] raw fault status: 0x800002C1 [ 345.209617] decoded fault status: SLAVE FAULT [ 345.209617] exception type 0xC1: TRANSLATION_FAULT_LEVEL1 [ 345.209617] access type 0x2: READ [ 345.209617] source id 0x8000 [ 345.729957] panfrost 1800000.gpu: gpu sched timeout, js=0, status=0x8, head=0x2400400, tail=0x2400400, sched_job=000000009e204de9 [ 346.055876] panfrost 1800000.gpu: mmu irq status=1 [ 346.060680] panfrost 1800000.gpu: Unhandled Page fault in AS0 at VA 0x0000000002C00A00 [ 346.060680] Reason: TODO [ 346.060680] raw fault status: 0x810002C1 [ 346.060680] decoded fault status: SLAVE FAULT [ 346.060680] exception type 0xC1: TRANSLATION_FAULT_LEVEL1 [ 346.060680] access type 0x2: READ [ 346.060680] source id 0x8100 [ 346.561955] panfrost 1800000.gpu: gpu sched timeout, js=1, status=0x8, head=0x2c00a00, tail=0x2c00a00, sched_job=00000000b55a9a85 [ 346.573913] panfrost 1800000.gpu: mmu irq status=1 [ 346.578707] panfrost 1800000.gpu: Unhandled Page fault in AS0 at VA 0x0000000002C00B80 [ 346.578707] Reason: TODO [ 346.578707] raw fault status: 0x800002C1 [ 346.578707] decoded fault status: SLAVE FAULT [ 346.578707] exception type 0xC1: TRANSLATION_FAULT_LEVEL1 [ 346.578707] access type 0x2: READ [ 346.578707] source id 0x8000 [ 347.073947] panfrost 1800000.gpu: gpu sched timeout, js=0, status=0x8, head=0x2c00b80, tail=0x2c00b80, sched_job=00000000cf6af8e8 [ 347.104125] panfrost 1800000.gpu: mmu irq status=1 [ 347.108930] panfrost 1800000.gpu: Unhandled Page fault in AS0 at VA 0x0000000002800900 [ 347.108930] Reason: TODO [ 347.108930] raw fault status: 0x810002C1 [ 347.108930] decoded faultn thi status: SLAVE FAULT [ 347.108930] exception type 0xC1: TRANSLATION_FAULT_LEVEL1 [ 347.108930] access type 0x2: READ [ 347.108930] source id 0x8100 [ 347.617950] panfrost 1800000.gpu: gpu sched timeout, js=1, status=0x8, head=0x2800900, tail=0x2800900, sched_job=000000009325fdb7 [ 347.629902] panfrost 1800000.gpu: mmu irq status=1 [ 347.634696] panfrost 1800000.gpu: Unhandled Page fault in AS0 at VA
0x0000000002800A80
Regards,
Clement
Quoted 2 lines
Robin.
Signature · 4 lines
You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/[email protected] To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/CAJiuCcd%3DgCQJ4mxn3wNhHXveOhFLnYSEs%2BcnOMHcALPvd7bQZw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
Quoted 125 lines · Clément Péron
Hi Robin,
Quoted 52 lines · Robin Murphy
Quoted 42 lines · Clément Péron
Hi,
Quoted 13 lines · Clément Péron
Hi,
Quoted 9 lines · Neil Armstrong
Hi,
Quoted 5 lines · Daniel Vetter
Quoted 4 lines · On Sun, May 12, 2019 at 07:46:00PM +0200, [email protected] wrote:
From: Clément Péron <[email protected]>
Hi,
Quoted 8 lines
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
The Allwinner H6 has a Mali-T720 MP2. The drivers are out-of-tree so this series only introduce the dt-bindings.
We do have an in-tree midgard driver now (since 5.2). Does this stuff work together with your dt changes here?
No, but it should be easy to add.
I will give it a try and let you know.
Added the
bus_clockand a ramp delay to thegpu_vddbut the driver fail at probe.[ 3.052919] panfrost 1800000.gpu: clock rate = 432000000 [ 3.058278] panfrost 1800000.gpu: bus_clock rate = 100000000 [ 3.179772] panfrost 1800000.gpu: mali-t720 id 0x720 major 0x1 minor 0x1 status 0x0 [ 3.187432] panfrost 1800000.gpu: features: 00000000,10309e40, issues: 00000000,21054400 [ 3.195531] panfrost 1800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xf JS:0x7 [ 3.207178] panfrost 1800000.gpu: shader_present=0x3 l2_present=0x1 [ 3.238257] panfrost 1800000.gpu: Fatal error during GPU init [ 3.244165] panfrost: probe of 1800000.gpu failed with error -12The ENOMEM is coming from "
panfrost_mmu_init" alloc_io_pgtable_ops(ARM_MALI_LPAE,&pfdev->mmu->pgtbl_cfg,Quoted 7 lines
pfdev);Which is due to a check in the pgtable alloc "
cfg->ias!= 48" arm-lpae io-pgtable:arm_mali_lpae_alloc_pgtablecfg->ias33cfg->oas40DRI stack is totally new for me, could you give me a little clue about this issue ?
Quoted 6 lines
Heh, this is probably the one bit which doesn't really count as "DRI stack".
That's merely a somewhat-conservative sanity check - I'm pretty sure it *should* be fine to change the test to "
cfg->ias> 48" (io-pgtable itself ought to cope). You'll just get to be the first to actually test a non-48-bit configuration here :)Thanks a lot, the probe seems fine now :)
I try to run glmark2 :
# glmark2-es2-drm ======================================================= glmark2 2017.07 ======================================================= OpenGL Information GL_VENDOR: panfrost GL_RENDERER: panfrost GL_VERSION: OpenGL ES 2.0 Mesa 19.1.0-rc2 ======================================================= [build] use-vbo=false:But it seems that H6 is not so easy to add :(.
[ 345.204813] panfrost 1800000.gpu: mmu irq status=1 [ 345.209617] panfrost 1800000.gpu: Unhandled Page fault in AS0 at VA 0x0000000002400400 [ 345.209617] Reason: TODO [ 345.209617] raw fault status: 0x800002C1 [ 345.209617] decoded fault status: SLAVE FAULT [ 345.209617] exception type 0xC1: TRANSLATION_FAULT_LEVEL1 [ 345.209617] access type 0x2: READ [ 345.209617] source id 0x8000 [ 345.729957] panfrost 1800000.gpu: gpu sched timeout, js=0, status=0x8, head=0x2400400, tail=0x2400400, sched_job=000000009e204de9 [ 346.055876] panfrost 1800000.gpu: mmu irq status=1 [ 346.060680] panfrost 1800000.gpu: Unhandled Page fault in AS0 at VA 0x0000000002C00A00 [ 346.060680] Reason: TODO [ 346.060680] raw fault status: 0x810002C1 [ 346.060680] decoded fault status: SLAVE FAULT [ 346.060680] exception type 0xC1: TRANSLATION_FAULT_LEVEL1 [ 346.060680] access type 0x2: READ [ 346.060680] source id 0x8100 [ 346.561955] panfrost 1800000.gpu: gpu sched timeout, js=1, status=0x8, head=0x2c00a00, tail=0x2c00a00, sched_job=00000000b55a9a85 [ 346.573913] panfrost 1800000.gpu: mmu irq status=1 [ 346.578707] panfrost 1800000.gpu: Unhandled Page fault in AS0 at VA 0x0000000002C00B80 [ 346.578707] Reason: TODO [ 346.578707] raw fault status: 0x800002C1 [ 346.578707] decoded fault status: SLAVE FAULT [ 346.578707] exception type 0xC1: TRANSLATION_FAULT_LEVEL1 [ 346.578707] access type 0x2: READ [ 346.578707] source id 0x8000 [ 347.073947] panfrost 1800000.gpu: gpu sched timeout, js=0, status=0x8, head=0x2c00b80, tail=0x2c00b80, sched_job=00000000cf6af8e8 [ 347.104125] panfrost 1800000.gpu: mmu irq status=1 [ 347.108930] panfrost 1800000.gpu: Unhandled Page fault in AS0 at VA 0x0000000002800900 [ 347.108930] Reason: TODO [ 347.108930] raw fault status: 0x810002C1 [ 347.108930] decoded faultn thi status: SLAVE FAULT [ 347.108930] exception type 0xC1: TRANSLATION_FAULT_LEVEL1 [ 347.108930] access type 0x2: READ [ 347.108930] source id 0x8100 [ 347.617950] panfrost 1800000.gpu: gpu sched timeout, js=1, status=0x8, head=0x2800900, tail=0x2800900, sched_job=000000009325fdb7 [ 347.629902] panfrost 1800000.gpu: mmu irq status=1 [ 347.634696] panfrost 1800000.gpu: Unhandled Page fault in AS0 at VA
Quoted 1 line
0x0000000002800A80
Is this 32 or 64 bit userspace? I think 64-bit does not work with T7xx. You might need this[1]. You may also be the first to try T720, so it could be something else.
Rob
[1] https://gitlab.freedesktop.org/mesa/mesa/merge_requests/650
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 128 lines · Rob Herring
Quoted 125 lines · Clément Péron
Hi Robin,
Quoted 52 lines · Robin Murphy
Quoted 42 lines · Clément Péron
Hi,
Quoted 13 lines · Clément Péron
Hi,
Quoted 9 lines · Neil Armstrong
Hi,
Quoted 5 lines · Daniel Vetter
Quoted 4 lines · On Sun, May 12, 2019 at 07:46:00PM +0200, [email protected] wrote:
From: Clément Péron <[email protected]>
Hi,
Quoted 8 lines
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
The Allwinner H6 has a Mali-T720 MP2. The drivers are out-of-tree so this series only introduce the dt-bindings.
We do have an in-tree midgard driver now (since 5.2). Does this stuff work together with your dt changes here?
No, but it should be easy to add.
I will give it a try and let you know.
Added the
bus_clockand a ramp delay to thegpu_vddbut the driver fail at probe.[ 3.052919] panfrost 1800000.gpu: clock rate = 432000000 [ 3.058278] panfrost 1800000.gpu: bus_clock rate = 100000000 [ 3.179772] panfrost 1800000.gpu: mali-t720 id 0x720 major 0x1 minor 0x1 status 0x0 [ 3.187432] panfrost 1800000.gpu: features: 00000000,10309e40, issues: 00000000,21054400 [ 3.195531] panfrost 1800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xf JS:0x7 [ 3.207178] panfrost 1800000.gpu: shader_present=0x3 l2_present=0x1 [ 3.238257] panfrost 1800000.gpu: Fatal error during GPU init [ 3.244165] panfrost: probe of 1800000.gpu failed with error -12The ENOMEM is coming from "
panfrost_mmu_init" alloc_io_pgtable_ops(ARM_MALI_LPAE,&pfdev->mmu->pgtbl_cfg,Quoted 7 lines
pfdev);Which is due to a check in the pgtable alloc "
cfg->ias!= 48" arm-lpae io-pgtable:arm_mali_lpae_alloc_pgtablecfg->ias33cfg->oas40DRI stack is totally new for me, could you give me a little clue about this issue ?
Quoted 6 lines
Heh, this is probably the one bit which doesn't really count as "DRI stack".
That's merely a somewhat-conservative sanity check - I'm pretty sure it *should* be fine to change the test to "
cfg->ias> 48" (io-pgtable itself ought to cope). You'll just get to be the first to actually test a non-48-bit configuration here :)Thanks a lot, the probe seems fine now :)
I try to run glmark2 :
# glmark2-es2-drm ======================================================= glmark2 2017.07 ======================================================= OpenGL Information GL_VENDOR: panfrost GL_RENDERER: panfrost GL_VERSION: OpenGL ES 2.0 Mesa 19.1.0-rc2 ======================================================= [build] use-vbo=false:But it seems that H6 is not so easy to add :(.
[ 345.204813] panfrost 1800000.gpu: mmu irq status=1 [ 345.209617] panfrost 1800000.gpu: Unhandled Page fault in AS0 at VA 0x0000000002400400 [ 345.209617] Reason: TODO [ 345.209617] raw fault status: 0x800002C1 [ 345.209617] decoded fault status: SLAVE FAULT [ 345.209617] exception type 0xC1: TRANSLATION_FAULT_LEVEL1 [ 345.209617] access type 0x2: READ [ 345.209617] source id 0x8000 [ 345.729957] panfrost 1800000.gpu: gpu sched timeout, js=0, status=0x8, head=0x2400400, tail=0x2400400, sched_job=000000009e204de9 [ 346.055876] panfrost 1800000.gpu: mmu irq status=1 [ 346.060680] panfrost 1800000.gpu: Unhandled Page fault in AS0 at VA 0x0000000002C00A00 [ 346.060680] Reason: TODO [ 346.060680] raw fault status: 0x810002C1 [ 346.060680] decoded fault status: SLAVE FAULT [ 346.060680] exception type 0xC1: TRANSLATION_FAULT_LEVEL1 [ 346.060680] access type 0x2: READ [ 346.060680] source id 0x8100 [ 346.561955] panfrost 1800000.gpu: gpu sched timeout, js=1, status=0x8, head=0x2c00a00, tail=0x2c00a00, sched_job=00000000b55a9a85 [ 346.573913] panfrost 1800000.gpu: mmu irq status=1 [ 346.578707] panfrost 1800000.gpu: Unhandled Page fault in AS0 at VA 0x0000000002C00B80 [ 346.578707] Reason: TODO [ 346.578707] raw fault status: 0x800002C1 [ 346.578707] decoded fault status: SLAVE FAULT [ 346.578707] exception type 0xC1: TRANSLATION_FAULT_LEVEL1 [ 346.578707] access type 0x2: READ [ 346.578707] source id 0x8000 [ 347.073947] panfrost 1800000.gpu: gpu sched timeout, js=0, status=0x8, head=0x2c00b80, tail=0x2c00b80, sched_job=00000000cf6af8e8 [ 347.104125] panfrost 1800000.gpu: mmu irq status=1 [ 347.108930] panfrost 1800000.gpu: Unhandled Page fault in AS0 at VA 0x0000000002800900 [ 347.108930] Reason: TODO [ 347.108930] raw fault status: 0x810002C1 [ 347.108930] decoded faultn thi status: SLAVE FAULT [ 347.108930] exception type 0xC1: TRANSLATION_FAULT_LEVEL1 [ 347.108930] access type 0x2: READ [ 347.108930] source id 0x8100 [ 347.617950] panfrost 1800000.gpu: gpu sched timeout, js=1, status=0x8, head=0x2800900, tail=0x2800900, sched_job=000000009325fdb7 [ 347.629902] panfrost 1800000.gpu: mmu irq status=1 [ 347.634696] panfrost 1800000.gpu: Unhandled Page fault in AS0 at VAQuoted 1 line
0x0000000002800A80
Quoted 2 lines
Is this 32 or 64 bit userspace? I think 64-bit does not work with T7xx. You might need this[1].
[ Oooh... that makes T620 actually do stuff without falling over dereferencing VA 0 somewhere halfway through the job chain :D
I shall continue to play... ]
Quoted 2 lines
You may also be the first to try T720,
so it could be something else.
I was expecting to see a similar behaviour to my T620 (which I now assume was down to 64-bit job descriptors sort-of-but-not-quite working) but this does look a bit more fundamental - the fact that it's a level 1 fault with VA == head == tail suggests to me that the MMU can't see the page tables at all to translate anything. I really hope that the H6 GPU integration doesn't suffer from the same DMA offset as the Allwinner display pipeline stuff, because that would be a real pain to support in io-pgtable.
Robin.
On 16/05/2019 12:19, Robin Murphy wrote:
[...]
Quoted 8 lines
I was expecting to see a similar behaviour to my T620 (which I now assume was down to 64-bit job descriptors sort-of-but-not-quite working) but this does look a bit more fundamental - the fact that it's a level 1 fault with VA == head == tail suggests to me that the MMU can't see the page tables at all to translate anything. I really hope that the H6 GPU integration doesn't suffer from the same DMA offset as the Allwinner display pipeline stuff, because that would be a real pain to support in io-pgtable.
Assuming you mean the case where the physical address (as seen by the CPU) is different from the dma address (as seen by the GPU), then I highly doubt it because mali_kbase doesn't support it:
[from kbase_mem_pool_alloc_page() in mali_kbase_mem_pool.c]:
dma_addr = dma_map_page(dev, p, 0, PAGE_SIZE, DMA_BIDIRECTIONAL);
if (dma_mapping_error(dev, dma_addr)) {
__free_page(p);
return NULL;
}
WARN_ON(dma_addr != page_to_phys(p));That being said it's quite possible there could be something in the bus which needs configuring to make this work - in which case your best bet is to look at the vendor kernel and see if anything extra is poked when the Mali driver is loaded.
Steve
Jernej Škrabec
maintainerHi!
Dne četrtek, 16. maj 2019 ob 13:19:06 CEST je Robin Murphy napisal(a):
Quoted 2 lines · Rob Herring
Quoted 1 line
On Wed, May 15, 2019 at 5:06 PM Clément Péron <[email protected]>
Quoted 7 lines · wrote:
Quoted 7 lines
Quoted 7 lines
Hi Robin,
Quoted 4 lines · Robin Murphy
Quoted 3 lines · Clément Péron
Hi,
On Tue, 14 May 2019 at 17:17, Clément Péron <[email protected]>
Quoted 3 lines · wrote:
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Hi,
On Tue, 14 May 2019 at 12:29, Neil Armstrong <[email protected]>
Quoted 4 lines · wrote:
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Hi,
Quoted 1 line · Daniel Vetter
On Sun, May 12, 2019 at 07:46:00PM +0200, [email protected]
Quoted 130 lines · wrote:
Quoted 119 lines
Quoted 117 lines
Quoted 43 lines
Quoted 34 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
From: Clément Péron <[email protected]>
Hi,
The Allwinner H6 has a Mali-T720 MP2. The drivers are out-of-tree so this series only introduce the dt-bindings.
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
We do have an in-tree midgard driver now (since 5.2). Does this stuff work
together with your dt changes here?No, but it should be easy to add.
I will give it a try and let you know.
Added the
bus_clockand a ramp delay to thegpu_vddbut the driver fail at probe.[ 3.052919] panfrost 1800000.gpu: clock rate = 432000000 [ 3.058278] panfrost 1800000.gpu: bus_clock rate = 100000000 [ 3.179772] panfrost 1800000.gpu: mali-t720 id 0x720 major 0x1 minor 0x1 status 0x0 [ 3.187432] panfrost 1800000.gpu: features: 00000000,10309e40, issues: 00000000,21054400 [ 3.195531] panfrost 1800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xf JS:0x7 [ 3.207178] panfrost 1800000.gpu: shader_present=0x3 l2_present=0x1 [ 3.238257] panfrost 1800000.gpu: Fatal error during GPU init [ 3.244165] panfrost: probe of 1800000.gpu failed with error -12The ENOMEM is coming from "
panfrost_mmu_init" alloc_io_pgtable_ops(ARM_MALI_LPAE,&pfdev->mmu->pgtbl_cfg,Quoted 8 lines
pfdev);Which is due to a check in the pgtable alloc "
cfg->ias!= 48" arm-lpae io-pgtable:arm_mali_lpae_alloc_pgtablecfg->ias33cfg->oas40DRI stack is totally new for me, could you give me a little clue about this issue ?
Quoted 7 lines
Heh, this is probably the one bit which doesn't really count as "DRI stack".
That's merely a somewhat-conservative sanity check - I'm pretty sure it *should* be fine to change the test to "
cfg->ias> 48" (io-pgtable itself ought to cope). You'll just get to be the first to actually test a non-48-bit configuration here :)Thanks a lot, the probe seems fine now :)
I try to run glmark2 :
# glmark2-es2-drm =======================================================glmark2 2017.07=======================================================
OpenGL Information GL_VENDOR: panfrost GL_RENDERER: panfrost GL_VERSION: OpenGL ES 2.0 Mesa 19.1.0-rc2=======================================================
[build] use-vbo=false:But it seems that H6 is not so easy to add :(.
[ 345.204813] panfrost 1800000.gpu: mmu irq status=1 [ 345.209617] panfrost 1800000.gpu: Unhandled Page fault in AS0 at VA 0x0000000002400400 [ 345.209617] Reason: TODO [ 345.209617] raw fault status: 0x800002C1 [ 345.209617] decoded fault status: SLAVE FAULT [ 345.209617] exception type 0xC1: TRANSLATION_FAULT_LEVEL1 [ 345.209617] access type 0x2: READ [ 345.209617] source id 0x8000 [ 345.729957] panfrost 1800000.gpu: gpu sched timeout, js=0, status=0x8, head=0x2400400, tail=0x2400400, sched_job=000000009e204de9 [ 346.055876] panfrost 1800000.gpu: mmu irq status=1 [ 346.060680] panfrost 1800000.gpu: Unhandled Page fault in AS0 at VA 0x0000000002C00A00 [ 346.060680] Reason: TODO [ 346.060680] raw fault status: 0x810002C1 [ 346.060680] decoded fault status: SLAVE FAULT [ 346.060680] exception type 0xC1: TRANSLATION_FAULT_LEVEL1 [ 346.060680] access type 0x2: READ [ 346.060680] source id 0x8100 [ 346.561955] panfrost 1800000.gpu: gpu sched timeout, js=1, status=0x8, head=0x2c00a00, tail=0x2c00a00, sched_job=00000000b55a9a85 [ 346.573913] panfrost 1800000.gpu: mmu irq status=1 [ 346.578707] panfrost 1800000.gpu: Unhandled Page fault in AS0 at VA 0x0000000002C00B80 [ 346.578707] Reason: TODO [ 346.578707] raw fault status: 0x800002C1 [ 346.578707] decoded fault status: SLAVE FAULT [ 346.578707] exception type 0xC1: TRANSLATION_FAULT_LEVEL1 [ 346.578707] access type 0x2: READ [ 346.578707] source id 0x8000 [ 347.073947] panfrost 1800000.gpu: gpu sched timeout, js=0, status=0x8, head=0x2c00b80, tail=0x2c00b80, sched_job=00000000cf6af8e8 [ 347.104125] panfrost 1800000.gpu: mmu irq status=1 [ 347.108930] panfrost 1800000.gpu: Unhandled Page fault in AS0 at VA 0x0000000002800900 [ 347.108930] Reason: TODO [ 347.108930] raw fault status: 0x810002C1 [ 347.108930] decoded faultn thi status: SLAVE FAULT [ 347.108930] exception type 0xC1: TRANSLATION_FAULT_LEVEL1 [ 347.108930] access type 0x2: READ [ 347.108930] source id 0x8100 [ 347.617950] panfrost 1800000.gpu: gpu sched timeout, js=1, status=0x8, head=0x2800900, tail=0x2800900, sched_job=000000009325fdb7 [ 347.629902] panfrost 1800000.gpu: mmu irq status=1 [ 347.634696] panfrost 1800000.gpu: Unhandled Page fault in AS0 at VAQuoted 1 line
0x0000000002800A80Quoted 2 lines
Is this 32 or 64 bit userspace? I think 64-bit does not work with T7xx. You might need this[1].
[ Oooh... that makes T620 actually do stuff without falling over dereferencing VA 0 somewhere halfway through the job chain :D
I shall continue to play... ]
Quoted 2 lines
You may also be the first to try T720,
so it could be something else.
Quoted 8 lines
I was expecting to see a similar behaviour to my T620 (which I now assume was down to 64-bit job descriptors sort-of-but-not-quite working) but this does look a bit more fundamental - the fact that it's a level 1 fault with VA == head == tail suggests to me that the MMU can't see the page tables at all to translate anything. I really hope that the H6 GPU integration doesn't suffer from the same DMA offset as the Allwinner display pipeline stuff, because that would be a real pain to support in io-pgtable.
DMA offset is present only on early SoCs with DE1. DE2 and DE3 (used on H6) have no offset.
Best regards,
Jernej
Signature · 4 lines
You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/[email protected] To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/259803076.m90EgR4Zsz%40jernej-laptop. For more options, visit https://groups.google.com/d/optout.