Skip to contentSkip to conversation

habanalabs: increase PCI ELBI timeout for Palladium

PATCH New Oded Gabbay 1 participant 1 message May 13, 2019 Char and misc drivers

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 habanalabs: increase PCI ELBI timeout for Palladium

From: Omer Shpigelman <[email protected]>

This patch increases the timeout for PCI ELBI configuration to support low frequency Palladium images.

---
 drivers/misc/habanalabs/habanalabs.h |  2 ++
 drivers/misc/habanalabs/pci.c        | 10 +++++++++-
 2 files changed, 11 insertions(+), 1 deletion(-)
drivers/misc/habanalabs/habanalabs.h +2 -0
index 2941838c04c1..9b1c03f1ab32 100644
@@ -34,6 +34,8 @@
 #define HL_ARMCP_INFO_TIMEOUT_USEC	10000000 /* 10s */
 #define HL_ARMCP_EEPROM_TIMEOUT_USEC	10000000 /* 10s */
 
+#define HL_PCI_ELBI_TIMEOUT_MSEC	10 /* 10ms */
+
 #define HL_MAX_QUEUES			128
 
 #define HL_MAX_JOBS_PER_CS		64
drivers/misc/habanalabs/pci.c +9 -1
index 0e78a04d63f4..c98d88c7a5c6 100644
@@ -10,6 +10,8 @@
 
 #include <linux/pci.h>
 
+#define HL_PLDM_PCI_ELBI_TIMEOUT_MSEC	(HL_PCI_ELBI_TIMEOUT_MSEC * 10)
+
 /**
  * hl_pci_bars_map() - Map PCI BARs.
  * @hdev: Pointer to hl_device structure.
@@ -88,8 +90,14 @@ static int hl_pci_elbi_write(struct hl_device *hdev, u64 addr, u32 data)
 {
 	struct pci_dev *pdev = hdev->pdev;
 	ktime_t timeout;
+	u64 msec;
 	u32 val;
 
+	if (hdev->pldm)
+		msec = HL_PLDM_PCI_ELBI_TIMEOUT_MSEC;
+	else
+		msec = HL_PCI_ELBI_TIMEOUT_MSEC;
+
 	/* Clear previous status */
 	pci_write_config_dword(pdev, mmPCI_CONFIG_ELBI_STS, 0);
 
@@ -98,7 +106,7 @@ static int hl_pci_elbi_write(struct hl_device *hdev, u64 addr, u32 data)
 	pci_write_config_dword(pdev, mmPCI_CONFIG_ELBI_CTRL,
 				PCI_CONFIG_ELBI_CTRL_WRITE);
 
-	timeout = ktime_add_ms(ktime_get(), 10);
+	timeout = ktime_add_ms(ktime_get(), msec);
 	for (;;) {
 		pci_read_config_dword(pdev, mmPCI_CONFIG_ELBI_STS, &val);
 		if (val & PCI_CONFIG_ELBI_STS_MASK)
Signature · 1 line
2.17.1