Skip to contentSkip to conversation

armv8: ls1028ardb: Add sd and emmc related environments

PATCH New Yuantian Tang 2 participants 4 messages May 14, 2019 – May 23, 2019

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 armv8: ls1028ardb: Add sd and emmc related environments

Add SD and EMMC environments to faciliate the boot.

---
 include/configs/ls1028a_common.h | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)
include/configs/ls1028a_common.h +13 -4
index 10f2e88bfd..9531548184 100644
@@ -127,15 +127,24 @@
 			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
 			"&& esbc_validate ${scripthdraddr};"    \
 		"source ${scriptaddr}\0"	  \
-	"sd_bootcmd=echo Trying load from SD ..;"	\
+		"xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
+		"sf probe 0:0 && sf read $load_addr " \
+		"$kernel_start $kernel_size ; env exists secureboot &&" \
+		"sf read $kernelheader_addr_r $kernelheader_start " \
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+		" bootm $load_addr#$board\0" \
+	"sd_bootcmd=echo Trying load from SD ...;" \
 		"mmcinfo; mmc read $load_addr "		\
 		"$kernel_addr_sd $kernel_size_sd && "	\
 		"env exists secureboot && mmc read $kernelheader_addr_r " \
 		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
 		" && esbc_validate ${kernelheader_addr_r};"	\
 		"bootm $load_addr#$board\0"		\
-	"sd_hdploadcmd=echo Trying load HDP firmware from SD..;"      \
-		"mmcinfo;mmc read $load_addr 0x4800 0x200 "		\
+		"xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
+		"sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
+		"&& hdp load $load_addr 0x2000\0"			\
+	"sd_hdploadcmd=echo Trying load HDP firmware from SD..;"        \
+		"mmcinfo;mmc read $load_addr 0x4a00 0x200 "             \
 		"&& hdp load $load_addr 0x2000\0"	\
 	"emmc_bootcmd=echo Trying load from EMMC ..;"	\
 		"mmcinfo; mmc dev 1; mmc read $load_addr "		\
@@ -145,7 +154,7 @@
 		" && esbc_validate ${kernelheader_addr_r};"	\
 		"bootm $load_addr#$board\0"			\
 	"emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;"      \
-		"mmc dev 1;mmcinfo;mmc read $load_addr 0x4800 0x200 "	\
+		"mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 "	\
 		"&& hdp load $load_addr 0x2000\0"
 
 #undef CONFIG_BOOTCOMMAND
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/1 armv8: ls1028ardb: Add sd and emmc related environments

Quoted 10 lines

-----Original Message-----
From: Yuantian Tang <[email protected]>
Sent: Tuesday, May 14, 2019 2:24 PM
To: Prabhakar Kushwaha <[email protected]>; Sudhanshu Gupta <[email protected]>; Harninder Rai <[email protected]>; Rajesh Bhagat <[email protected]>
Cc: u-boot at lists.denx.de; Andy Tang <[email protected]>
Subject: [PATCH] armv8: ls1028ardb: Add sd and emmc related environments

Quoted 4 lines

Add SD and EMMC environments to faciliate the boot.

---

Please rebase after my pull request getting accepted

--pk

#2 lore raw

PATCH 1/1 armv8: ls1028ardb: Add sd and emmc related environments

Quoted 21 lines

-----Original Message-----
From: Prabhakar Kushwaha
Sent: Wednesday, May 22, 2019 6:07 PM
To: Yuantian Tang <[email protected]>; Sudhanshu Gupta <[email protected]>; Harninder Rai <[email protected]>; Rajesh Bhagat <[email protected]>
Cc: u-boot at lists.denx.de; Andy Tang <[email protected]>
Subject: RE: [PATCH] armv8: ls1028ardb: Add sd and emmc related environments

Quoted 10 lines

-----Original Message-----
From: Yuantian Tang <[email protected]>
Sent: Tuesday, May 14, 2019 2:24 PM
To: Prabhakar Kushwaha <[email protected]>; Sudhanshu Gupta <[email protected]>; Harninder Rai <[email protected]>; Rajesh Bhagat <[email protected]>
Cc: u-boot at lists.denx.de; Andy Tang <[email protected]>
Subject: [PATCH] armv8: ls1028ardb: Add sd and emmc related environments

Quoted 7 lines
Quoted 4 lines

Add SD and EMMC environments to faciliate the boot.

---

Please rebase after my pull request getting accepted

My pull request accepted. Please rebase it on top of the tree.

I am marking this patch as "change requested"

--pk

author
#3 lore raw

PATCH 1/1 armv8: ls1028ardb: Add sd and emmc related environments

No problem. Thanks Prabhakar,

BR,
Andy

Quoted 46 lines

-----Original Message-----
From: Prabhakar Kushwaha
Sent: 2019年5月23日 9:11
To: Andy Tang <[email protected]>; Sudhanshu Gupta <[email protected]>; Harninder Rai <[email protected]>; Rajesh Bhagat <[email protected]>
Cc: u-boot at lists.denx.de; Andy Tang <[email protected]>
Subject: RE: [PATCH] armv8: ls1028ardb: Add sd and emmc related environments

Quoted 15 lines

-----Original Message-----
From: Prabhakar Kushwaha
Sent: Wednesday, May 22, 2019 6:07 PM
To: Yuantian Tang <[email protected]>; Sudhanshu Gupta <[email protected]>; Harninder Rai <[email protected]>; Rajesh Bhagat <[email protected]>
Cc: u-boot at lists.denx.de; Andy Tang <[email protected]>
Subject: RE: [PATCH] armv8: ls1028ardb: Add sd and emmc related environments

Quoted 4 lines

-----Original Message-----
From: Yuantian Tang <[email protected]>
Sent: Tuesday, May 14, 2019 2:24 PM
To: Prabhakar Kushwaha <[email protected]>; Sudhanshu

Gupta

Quoted 6 lines
Quoted 6 lines

<[email protected]>; Harninder Rai <[email protected]>; Rajesh Bhagat <[email protected]>
Cc: u-boot at lists.denx.de; Andy Tang <[email protected]>
Subject: [PATCH] armv8: ls1028ardb: Add sd and emmc related environments

Quoted 7 lines
Quoted 4 lines

Add SD and EMMC environments to faciliate the boot.

---

Please rebase after my pull request getting accepted

My pull request accepted. Please rebase it on top of the tree.

I am marking this patch as "change requested"

--pk