Skip to contentSkip to conversation

5.1.3-stable review

PATCH In review Greg Kroah-Hartman 7 participants 60 messages May 15, 2019 – May 17, 2019

Subsystems (4)
lore
Share & tools
lore
author maintainer
#1 lore raw

PATCH 1/46 platform/x86: sony-laptop: Fix unintentional fall-through

In reply to Greg Kroah-Hartman

From: Gustavo A. R. Silva <[email protected]>

commit 1cbd7a64959d33e7a2a1fa2bf36a62b350a9fcbd upstream.

It seems that the default case should return AE_CTRL_TERMINATE, instead of falling through to case ACPI_RESOURCE_TYPE_END_TAG and returning AE_OK; otherwise the line of code at the end of the function is unreachable and makes no sense:

return AE_CTRL_TERMINATE;

This fix is based on the following thread of discussion:

https://lore.kernel.org/patchwork/patch/959782/

Fixes 33a04454527e ("sony-laptop: Add SNY6001 device handling (sonypi reimplementation)")
---
 drivers/platform/x86/sony-laptop.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/platform/x86/sony-laptop.c +5 -3
@@ -4424,14 +4424,16 @@ sony_pic_read_possible_resource(struct a
 			}
 			return AE_OK;
 		}
+
+	case ACPI_RESOURCE_TYPE_END_TAG:
+		return AE_OK;
+
 	default:
 		dprintk("Resource %d isn't an IRQ nor an IO port\n",
 			resource->type);
+		return AE_CTRL_TERMINATE;
 
-	case ACPI_RESOURCE_TYPE_END_TAG:
-		return AE_OK;
 	}
-	return AE_CTRL_TERMINATE;
 }
 
 static int sony_pic_possible_resources(struct acpi_device *device)
author maintainer
#10 lore raw

PATCH 10/46 USB: serial: fix unthrottle races

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 3f5edd58d040bfa4b74fb89bc02f0bc6b9cd06ab upstream.

Fix two long-standing bugs which could potentially lead to memory corruption or leave the port throttled until it is reopened (on weakly ordered systems), respectively, when read-URB completion races with unthrottle().

First, the URB must not be marked as free before processing is complete to prevent it from being submitted by unthrottle() on another CPU.

	CPU 1				CPU 2
	================		================
	complete()			unthrottle()
	  process_urb();
	  smp_mb__before_atomic();
	  set_bit(i, free);		  if (test_and_clear_bit(i, free))
	  					  submit_urb();

Second, the URB must be marked as free before checking the throttled flag to prevent unthrottle() on another CPU from failing to observe that the URB needs to be submitted if complete() sees that the throttled flag is set.

	CPU 1				CPU 2
	================		================
	complete()			unthrottle()
	  set_bit(i, free);		  throttled = 0;
	  smp_mb__after_atomic();	  smp_mb();
	  if (throttled)		  if (test_and_clear_bit(i, free))
	  	  return;			  submit_urb();

Note that test_and_clear_bit() only implies barriers when the test is successful. To handle the case where the URB is still in use an explicit barrier needs to be added to unthrottle() for the second race condition.

Fixes d83b405383c9 ("USB: serial: add support for multiple read urbs")
---
 drivers/usb/serial/generic.c |   39 ++++++++++++++++++++++++++++++++-------
 1 file changed, 32 insertions(+), 7 deletions(-)
drivers/usb/serial/generic.c +32 -7
@@ -376,6 +376,7 @@ void usb_serial_generic_read_bulk_callba
 	struct usb_serial_port *port = urb->context;
 	unsigned char *data = urb->transfer_buffer;
 	unsigned long flags;
+	bool stopped = false;
 	int status = urb->status;
 	int i;
 
@@ -383,33 +384,51 @@ void usb_serial_generic_read_bulk_callba
 		if (urb == port->read_urbs[i])
 			break;
 	}
-	set_bit(i, &port->read_urbs_free);
 
 	dev_dbg(&port->dev, "%s - urb %d, len %d\n", __func__, i,
 							urb->actual_length);
 	switch (status) {
 	case 0:
+		usb_serial_debug_data(&port->dev, __func__, urb->actual_length,
+							data);
+		port->serial->type->process_read_urb(urb);
 		break;
 	case -ENOENT:
 	case -ECONNRESET:
 	case -ESHUTDOWN:
 		dev_dbg(&port->dev, "%s - urb stopped: %d\n",
 							__func__, status);
-		return;
+		stopped = true;
+		break;
 	case -EPIPE:
 		dev_err(&port->dev, "%s - urb stopped: %d\n",
 							__func__, status);
-		return;
+		stopped = true;
+		break;
 	default:
 		dev_dbg(&port->dev, "%s - nonzero urb status: %d\n",
 							__func__, status);
-		goto resubmit;
+		break;
 	}
 
-	usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
-	port->serial->type->process_read_urb(urb);
+	/*
+	 * Make sure URB processing is done before marking as free to avoid
+	 * racing with unthrottle() on another CPU. Matches the barriers
+	 * implied by the test_and_clear_bit() in
+	 * usb_serial_generic_submit_read_urb().
+	 */
+	smp_mb__before_atomic();
+	set_bit(i, &port->read_urbs_free);
+	/*
+	 * Make sure URB is marked as free before checking the throttled flag
+	 * to avoid racing with unthrottle() on another CPU. Matches the
+	 * smp_mb() in unthrottle().
+	 */
+	smp_mb__after_atomic();
+
+	if (stopped)
+		return;
 
-resubmit:
 	/* Throttle the device if requested by tty */
 	spin_lock_irqsave(&port->lock, flags);
 	port->throttled = port->throttle_req;
@@ -484,6 +503,12 @@ void usb_serial_generic_unthrottle(struc
 	port->throttled = port->throttle_req = 0;
 	spin_unlock_irq(&port->lock);
 
+	/*
+	 * Matches the smp_mb__after_atomic() in
+	 * usb_serial_generic_read_bulk_callback().
+	 */
+	smp_mb();
+
 	if (was_throttled)
 		usb_serial_generic_submit_read_urbs(port, GFP_KERNEL);
 }
author maintainer
#11 lore raw

PATCH 11/46 mwl8k: Fix rate_idx underflow

In reply to Greg Kroah-Hartman

From: Petr Štetiar <[email protected]>

commit 6b583201fa219b7b1b6aebd8966c8fd9357ef9f4 upstream.

It was reported on OpenWrt bug tracking system[1], that several users are affected by the endless reboot of their routers if they configure 5GHz interface with channel 44 or 48.

The reboot loop is caused by the following excessive number of WARN_ON messages:

 WARNING: CPU: 0 PID: 0 at backports-4.19.23-1/net/mac80211/rx.c:4516
                             ieee80211_rx_napi+0x1fc/0xa54 [mac80211]

as the messages are being correctly emitted by the following guard:

case RX_ENC_LEGACY:

      if (WARN_ON(status->rate_idx >= sband->n_bitrates))

as the rate_idx is in this case erroneously set to 251 (0xfb). This fix simply converts previously used magic number to proper constant and guards against substraction which is leading to the currently observed underflow.

1. https://bugs.openwrt.org/index.php?do=details&task_id=2218

Fixes 854783444bab ("mwl8k: properly set receive status rate index on 5 GHz receive")
---
 drivers/net/wireless/marvell/mwl8k.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/net/wireless/marvell/mwl8k.c +9 -4
@@ -441,6 +441,9 @@ static const struct ieee80211_rate mwl8k
 #define MWL8K_CMD_UPDATE_STADB		0x1123
 #define MWL8K_CMD_BASTREAM		0x1125
 
+#define MWL8K_LEGACY_5G_RATE_OFFSET \
+	(ARRAY_SIZE(mwl8k_rates_24) - ARRAY_SIZE(mwl8k_rates_50))
+
 static const char *mwl8k_cmd_name(__le16 cmd, char *buf, int bufsize)
 {
 	u16 command = le16_to_cpu(cmd);
@@ -1016,8 +1019,9 @@ mwl8k_rxd_ap_process(void *_rxd, struct
 
 	if (rxd->channel > 14) {
 		status->band = NL80211_BAND_5GHZ;
-		if (!(status->encoding == RX_ENC_HT))
-			status->rate_idx -= 5;
+		if (!(status->encoding == RX_ENC_HT) &&
+		    status->rate_idx >= MWL8K_LEGACY_5G_RATE_OFFSET)
+			status->rate_idx -= MWL8K_LEGACY_5G_RATE_OFFSET;
 	} else {
 		status->band = NL80211_BAND_2GHZ;
 	}
@@ -1124,8 +1128,9 @@ mwl8k_rxd_sta_process(void *_rxd, struct
 
 	if (rxd->channel > 14) {
 		status->band = NL80211_BAND_5GHZ;
-		if (!(status->encoding == RX_ENC_HT))
-			status->rate_idx -= 5;
+		if (!(status->encoding == RX_ENC_HT) &&
+		    status->rate_idx >= MWL8K_LEGACY_5G_RATE_OFFSET)
+			status->rate_idx -= MWL8K_LEGACY_5G_RATE_OFFSET;
 	} else {
 		status->band = NL80211_BAND_2GHZ;
 	}
author maintainer
#14 lore raw

PATCH 14/46 bonding: fix arp_validate toggling in active-backup mode

In reply to Greg Kroah-Hartman

From: Jarod Wilson <[email protected]>

[ Upstream commit a9b8a2b39ce65df45687cf9ef648885c2a99fe75 ]

There's currently a problem with toggling arp_validate on and off with an active-backup bond. At the moment, you can start up a bond, like so:

modprobe bonding mode=1 arp_interval=100 arp_validate=0 arp_ip_targets=192.168.1.1 ip link set bond0 down
echo "ens4f0" > /sys/class/net/bond0/bonding/slaves
echo "ens4f1" > /sys/class/net/bond0/bonding/slaves
ip link set bond0 up
ip addr add 192.168.1.2/24 dev bond0

Pings to 192.168.1.1 work just fine. Now turn on arp_validate:

echo 1 > /sys/class/net/bond0/bonding/arp_validate

Pings to 192.168.1.1 continue to work just fine. Now when you go to turn arp_validate off again, the link falls flat on it's face:

echo 0 > /sys/class/net/bond0/bonding/arp_validate dmesg
...

[133191.911987] bond0: Setting arp_validate to none (0)
[133194.257793] bond0: bond_should_notify_peers: slave ens4f0
[133194.258031] bond0: link status definitely down for interface ens4f0, disabling it
[133194.259000] bond0: making interface ens4f1 the new active one
[133197.330130] bond0: link status definitely down for interface ens4f1, disabling it
[133197.331191] bond0: now running without any active interface!

The problem lies in bond_options.c, where passing in arp_validate=0 results in bond->recv_probe getting set to NULL. This flies directly in the face of commit 3fe68df97c7f, which says we need to set recv_probe = bond_arp_recv, even if we're not using arp_validate. Said commit fixed this in bond_option_arp_interval_set, but missed that we can get to that same state in bond_option_arp_validate_set as well.

One solution would be to universally set recv_probe = bond_arp_recv here as well, but I don't think bond_option_arp_validate_set has any business touching recv_probe at all, and that should be left to the arp_interval code, so we can just make things much tidier here.

Fixes 3fe68df97c7f ("bonding: always set recv_probe to bond_arp_rcv in arp monitor")
CC Jay Vosburgh <[email protected]>
CC Veaceslav Falico <[email protected]>
CC Andy Gospodarek <[email protected]>
CC "David S. Miller" <[email protected]>
---
 drivers/net/bonding/bond_options.c |    7 -------
 1 file changed, 7 deletions(-)
drivers/net/bonding/bond_options.c +0 -7
@@ -1098,13 +1098,6 @@ static int bond_option_arp_validate_set(
 {
 	netdev_dbg(bond->dev, "Setting arp_validate to %s (%llu)\n",
 		   newval->string, newval->value);
-
-	if (bond->dev->flags & IFF_UP) {
-		if (!newval->value)
-			bond->recv_probe = NULL;
-		else if (bond->params.arp_interval)
-			bond->recv_probe = bond_arp_rcv;
-	}
 	bond->params.arp_validate = newval->value;
 
 	return 0;
author maintainer
#15 lore raw

PATCH 15/46 bridge: Fix error path for kobject_init_and_add()

In reply to Greg Kroah-Hartman

From: "Tobin C. Harding" <[email protected]>

[ Upstream commit bdfad5aec1392b93495b77b864d58d7f101dc1c1 ]

Currently error return from kobject_init_and_add() is not followed by a call to kobject_put(). This means there is a memory leak. We currently set p to NULL so that kfree() may be called on it as a noop, the code is arguably clearer if we move the kfree() up closer to where it is called (instead of after goto jump).

Remove a goto label 'err1' and jump to call to kobject_put() in error return from kobject_init_and_add() fixing the memory leak. Re-name goto label 'put_back' to 'err1' now that we don't use err1, following current nomenclature (err1, err2 ...). Move call to kfree out of the error code at bottom of function up to closer to where memory was allocated. Add comment to clarify call to kfree().

---
 net/bridge/br_if.c |   13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
net/bridge/br_if.c +6 -7
@@ -602,13 +602,15 @@ int br_add_if(struct net_bridge *br, str
 	call_netdevice_notifiers(NETDEV_JOIN, dev);
 
 	err = dev_set_allmulti(dev, 1);
-	if (err)
-		goto put_back;
+	if (err) {
+		kfree(p);	/* kobject not yet init'd, manually free */
+		goto err1;
+	}
 
 	err = kobject_init_and_add(&p->kobj, &brport_ktype, &(dev->dev.kobj),
 				   SYSFS_BRIDGE_PORT_ATTR);
 	if (err)
-		goto err1;
+		goto err2;
 
 	err = br_sysfs_addif(p);
 	if (err)
@@ -700,12 +702,9 @@ err3:
 	sysfs_remove_link(br->ifobj, p->dev->name);
 err2:
 	kobject_put(&p->kobj);
-	p = NULL; /* kobject_put frees */
-err1:
 	dev_set_allmulti(dev, -1);
-put_back:
+err1:
 	dev_put(dev);
-	kfree(p);
 	return err;
 }
 
author maintainer
#16 lore raw

PATCH 16/46 dpaa_eth: fix SG frame cleanup

In reply to Greg Kroah-Hartman

From: Laurentiu Tudor <[email protected]>

[ Upstream commit 17170e6570c082717c142733d9a638bcd20551f8 ]

Fix issue with the entry indexing in the sg frame cleanup code being off-by-1. This problem showed up when doing some basic iperf tests and manifested in traffic coming to a halt.

---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c +1 -1
@@ -1648,7 +1648,7 @@ static struct sk_buff *dpaa_cleanup_tx_f
 				 qm_sg_entry_get_len(&sgt[0]), dma_dir);
 
 		/* remaining pages were mapped with skb_frag_dma_map() */
-		for (i = 1; i < nr_frags; i++) {
+		for (i = 1; i <= nr_frags; i++) {
 			WARN_ON(qm_sg_entry_is_ext(&sgt[i]));
 
 			dma_unmap_page(dev, qm_sg_addr(&sgt[i]),
author maintainer
#18 lore raw

PATCH 18/46 ipv4: Fix raw socket lookup for local traffic

In reply to Greg Kroah-Hartman

From: David Ahern <[email protected]>

[ Upstream commit 19e4e768064a87b073a4b4c138b55db70e0cfb9f ]

inet_iif should be used for the raw socket lookup. inet_iif considers rt_iif which handles the case of local traffic.

As it stands, ping to a local address with the '-I <dev>' option fails ever since ping was changed to use SO_BINDTODEVICE instead of cmsg + IP_PKTINFO.

IPv6 works fine.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 net/ipv4/raw.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/ipv4/raw.c +2 -2
@@ -173,6 +173,7 @@ static int icmp_filter(const struct sock
 static int raw_v4_input(struct sk_buff *skb, const struct iphdr *iph, int hash)
 {
 	int sdif = inet_sdif(skb);
+	int dif = inet_iif(skb);
 	struct sock *sk;
 	struct hlist_head *head;
 	int delivered = 0;
@@ -185,8 +186,7 @@ static int raw_v4_input(struct sk_buff *
 
 	net = dev_net(skb->dev);
 	sk = __raw_v4_lookup(net, __sk_head(head), iph->protocol,
-			     iph->saddr, iph->daddr,
-			     skb->dev->ifindex, sdif);
+			     iph->saddr, iph->daddr, dif, sdif);
 
 	while (sk) {
 		delivered = 1;
author maintainer
#21 lore raw

PATCH 21/46 net: macb: Change interrupt and napi enable order in open

In reply to Greg Kroah-Hartman

From: Harini Katakam <[email protected]>

[ Upstream commit 0504453139ef5a593c9587e1e851febee859c7d8 ]

Current order in open:
-> Enable interrupts (macb_init_hw)
-> Enable NAPI
-> Start PHY

Sequence of RX handling:
-> RX interrupt occurs
-> Interrupt is cleared and interrupt bits disabled in handler -> NAPI is scheduled
-> In NAPI, RX budget is processed and RX interrupts are re-enabled

With the above, on QEMU or fixed link setups (where PHY state doesn't matter), there's a chance macb RX interrupt occurs before NAPI is enabled. This will result in NAPI being scheduled before it is enabled. Fix this macb open by changing the order.

Fixes ae1f2a56d273 ("net: macb: Added support for many RX queues")
---
 drivers/net/ethernet/cadence/macb_main.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/net/ethernet/cadence/macb_main.c +3 -3
@@ -2461,12 +2461,12 @@ static int macb_open(struct net_device *
 		goto pm_exit;
 	}
 
-	bp->macbgem_ops.mog_init_rings(bp);
-	macb_init_hw(bp);
-
 	for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue)
 		napi_enable(&queue->napi);
 
+	bp->macbgem_ops.mog_init_rings(bp);
+	macb_init_hw(bp);
+
 	/* schedule a link state check */
 	phy_start(dev->phydev);
 
author maintainer
#22 lore raw

PATCH 22/46 net: seeq: fix crash caused by not set dev.parent

In reply to Greg Kroah-Hartman

From: Thomas Bogendoerfer <[email protected]>

[ Upstream commit 5afcd14cfc7fed1bcc8abcee2cef82732772bfc2 ]

The old MIPS implementation of dma_cache_sync() didn't use the dev argument, but commit c9eb6172c328 ("dma-mapping: turn dma_cache_sync into a dma_map_ops method") changed that, so we now need to set dev.parent.

---
 drivers/net/ethernet/seeq/sgiseeq.c |    1 +
 1 file changed, 1 insertion(+)
drivers/net/ethernet/seeq/sgiseeq.c +1 -0
@@ -735,6 +735,7 @@ static int sgiseeq_probe(struct platform
 	}
 
 	platform_set_drvdata(pdev, dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
 	sp = netdev_priv(dev);
 
 	/* Make private data page aligned */
author maintainer
#23 lore raw

PATCH 23/46 net: ucc_geth - fix Oops when changing number of buffers in the ring

In reply to Greg Kroah-Hartman

From: Christophe Leroy <[email protected]>

[ Upstream commit ee0df19305d9fabd9479b785918966f6e25b733b ]

When changing the number of buffers in the RX ring while the interface is running, the following Oops is encountered due to the new number of buffers being taken into account immediately while their allocation is done when opening the device only.

[   69.882706] Unable to handle kernel paging request for data at address 0xf0000100
[   69.890172] Faulting instruction address: 0xc033e164
[   69.895122] Oops: Kernel access of bad area, sig: 11 [#1]
[   69.900494] BE PREEMPT CMPCPRO
[   69.907120] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.115-00006-g179ade8ce3-dirty #269
[   69.915956] task: c0684310 task.stack: c06da000
[   69.920470] NIP:  c033e164 LR: c02e44d0 CTR: c02e41fc
[   69.925504] REGS: dfff1e20 TRAP: 0300   Not tainted  (4.14.115-00006-g179ade8ce3-dirty)
[   69.934161] MSR:  00009032 <EE,ME,IR,DR,RI>  CR: 22004428  XER: 20000000
[   69.940869] DAR: f0000100 DSISR: 20000000
[   69.940869] GPR00: c0352d70 dfff1ed0 c0684310 f00000a4 00000040 dfff1f68 00000000 0000001f
[   69.940869] GPR08: df53f410 1cc00040 00000021 c0781640 42004424 100c82b6 f00000a4 df53f5b0
[   69.940869] GPR16: df53f6c0 c05daf84 00000040 00000000 00000040 c0782be4 00000000 00000001
[   69.940869] GPR24: 00000000 df53f400 000001b0 df53f410 df53f000 0000003f df708220 1cc00044
[   69.978348] NIP [c033e164] skb_put+0x0/0x5c
[   69.982528] LR [c02e44d0] ucc_geth_poll+0x2d4/0x3f8
[   69.987384] Call Trace:
[   69.989830] [dfff1ed0] [c02e4554] ucc_geth_poll+0x358/0x3f8 (unreliable)
[   69.996522] [dfff1f20] [c0352d70] net_rx_action+0x248/0x30c
[   70.002099] [dfff1f80] [c04e93e4] __do_softirq+0xfc/0x310
[   70.007492] [dfff1fe0] [c0021124] irq_exit+0xd0/0xd4
[   70.012458] [dfff1ff0] [c000e7e0] call_do_irq+0x24/0x3c
[   70.017683] [c06dbe80] [c0006bac] do_IRQ+0x64/0xc4
[   70.022474] [c06dbea0] [c001097c] ret_from_except+0x0/0x14
[   70.027964] --- interrupt: 501 at rcu_idle_exit+0x84/0x90
[   70.027964]     LR = rcu_idle_exit+0x74/0x90
[   70.037585] [c06dbf60] [20000000] 0x20000000 (unreliable)
[   70.042984] [c06dbf80] [c004bb0c] do_idle+0xb4/0x11c
[   70.047945] [c06dbfa0] [c004bd14] cpu_startup_entry+0x18/0x1c
[   70.053682] [c06dbfb0] [c05fb034] start_kernel+0x370/0x384
[   70.059153] [c06dbff0] [00003438] 0x3438
[   70.063062] Instruction dump:
[   70.066023] 38a00000 38800000 90010014 4bfff015 80010014 7c0803a6 3123ffff 7c691910
[   70.073767] 38210010 4e800020 38600000 4e800020 <80e3005c> 80c30098 3107ffff 7d083910
[   70.081690] ---[ end trace be7ccd9c1e1a9f12 ]---

This patch forbids the modification of the number of buffers in the ring while the interface is running.

Fixes ac421852b3a0 ("ucc_geth: add ethtool support")
---
 drivers/net/ethernet/freescale/ucc_geth_ethtool.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/net/ethernet/freescale/ucc_geth_ethtool.c +3 -5
@@ -252,14 +252,12 @@ uec_set_ringparam(struct net_device *net
 		return -EINVAL;
 	}
 
+	if (netif_running(netdev))
+		return -EBUSY;
+
 	ug_info->bdRingLenRx[queue] = ring->rx_pending;
 	ug_info->bdRingLenTx[queue] = ring->tx_pending;
 
-	if (netif_running(netdev)) {
-		/* FIXME: restart automatically */
-		netdev_info(netdev, "Please re-open the interface\n");
-	}
-
 	return ret;
 }
 
author maintainer
#24 lore raw

PATCH 24/46 packet: Fix error path in packet_init

In reply to Greg Kroah-Hartman

From: YueHaibing <[email protected]>

[ Upstream commit 36096f2f4fa05f7678bc87397665491700bae757 ]

kernel BUG at lib/list_debug.c:47!
invalid opcode: 0000 [#1

CPU: 0 PID: 12914 Comm: rmmod Tainted: G        W         5.1.0+ #47
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:__list_del_entry_valid+0x53/0x90
Code: 48 8b 32 48 39 fe 75 35 48 8b 50 08 48 39 f2 75 40 b8 01 00 00 00 5d c3 48
89 fe 48 89 c2 48 c7 c7 18 75 fe 82 e8 cb 34 78 ff <0f> 0b 48 89 fe 48 c7 c7 50 75 fe 82 e8 ba 34 78 ff 0f 0b 48 89 f2
RSP: 0018:ffffc90001c2fe40 EFLAGS: 00010286
RAX: 000000000000004e RBX: ffffffffa0184000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff888237a17788 RDI: 00000000ffffffff
RBP: ffffc90001c2fe40 R08: 0000000000000000 R09: 0000000000000000
R10: ffffc90001c2fe10 R11: 0000000000000000 R12: 0000000000000000
R13: ffffc90001c2fe50 R14: ffffffffa0184000 R15: 0000000000000000
FS:  00007f3d83634540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555c350ea818 CR3: 0000000231677000 CR4: 00000000000006f0
Call Trace:
 unregister_pernet_operations+0x34/0x120
 unregister_pernet_subsys+0x1c/0x30
 packet_exit+0x1c/0x369 [af_packet
 __x64_sys_delete_module+0x156/0x260
 ? lockdep_hardirqs_on+0x133/0x1b0
 ? do_syscall_64+0x12/0x1f0
 do_syscall_64+0x6e/0x1f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

When modprobe af_packet, register_pernet_subsys
fails and does a cleanup, ops->list is set to LIST_POISON1, but the module init is considered to success, then while rmmod it, BUG() is triggered in __list_del_entry_valid which is called from unregister_pernet_subsys. This patch fix error handing path in packet_init to avoid possilbe issue if some error occur.

---
 net/packet/af_packet.c |   25 ++++++++++++++++++++-----
 1 file changed, 20 insertions(+), 5 deletions(-)
net/packet/af_packet.c +20 -5
@@ -4603,14 +4603,29 @@ static void __exit packet_exit(void)
 
 static int __init packet_init(void)
 {
-	int rc = proto_register(&packet_proto, 0);
+	int rc;
 
-	if (rc != 0)
+	rc = proto_register(&packet_proto, 0);
+	if (rc)
 		goto out;
+	rc = sock_register(&packet_family_ops);
+	if (rc)
+		goto out_proto;
+	rc = register_pernet_subsys(&packet_net_ops);
+	if (rc)
+		goto out_sock;
+	rc = register_netdevice_notifier(&packet_netdev_notifier);
+	if (rc)
+		goto out_pernet;
 
-	sock_register(&packet_family_ops);
-	register_pernet_subsys(&packet_net_ops);
-	register_netdevice_notifier(&packet_netdev_notifier);
+	return 0;
+
+out_pernet:
+	unregister_pernet_subsys(&packet_net_ops);
+out_sock:
+	sock_unregister(PF_PACKET);
+out_proto:
+	proto_unregister(&packet_proto);
 out:
 	return rc;
 }
author maintainer
#26 lore raw

PATCH 26/46 tipc: fix hanging clients using poll with EPOLLOUT flag

In reply to Greg Kroah-Hartman

From: Parthasarathy Bhuvaragan <[email protected]>

[ Upstream commit ff946833b70e0c7f93de9a3f5b329b5ae2287b38 ]

commit 517d7c79bdb398 ("tipc: fix hanging poll() for stream sockets") introduced a regression for clients using non-blocking sockets. After the commit, we send EPOLLOUT event to the client even in TIPC_CONNECTING state. This causes the subsequent send() to fail with ENOTCONN, as the socket is still not in TIPC_ESTABLISHED state.

In this commit, we:
- improve the fix for hanging poll() by replacing sk_data_ready() with sk_state_change() to wake up all clients.
- revert the faulty updates introduced by commit 517d7c79bdb398 ("tipc: fix hanging poll() for stream sockets").

Fixes 517d7c79bdb398 ("tipc: fix hanging poll() for stream sockets")
---
 net/tipc/socket.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/tipc/socket.c +2 -2
@@ -734,11 +734,11 @@ static __poll_t tipc_poll(struct file *f
 
 	switch (sk->sk_state) {
 	case TIPC_ESTABLISHED:
-	case TIPC_CONNECTING:
 		if (!tsk->cong_link_cnt && !tsk_conn_cong(tsk))
 			revents |= EPOLLOUT;
 		/* fall through */
 	case TIPC_LISTEN:
+	case TIPC_CONNECTING:
 		if (!skb_queue_empty(&sk->sk_receive_queue))
 			revents |= EPOLLIN | EPOLLRDNORM;
 		break;
@@ -2041,7 +2041,7 @@ static bool tipc_sk_filter_connect(struc
 			if (msg_data_sz(hdr))
 				return true;
 			/* Empty ACK-, - wake up sleeping connect() and drop */
-			sk->sk_data_ready(sk);
+			sk->sk_state_change(sk);
 			msg_set_dest_droppable(hdr, 1);
 			return false;
 		}
author maintainer
#25 lore raw

PATCH 25/46 selinux: do not report error on connect(AF_UNSPEC)

In reply to Greg Kroah-Hartman

From: Paolo Abeni <[email protected]>

[ Upstream commit c7e0d6cca86581092cbbf2cd868b3601495554cf ]

calling connect(AF_UNSPEC) on an already connected TCP socket is an established way to disconnect() such socket. After commit 68741a8adab9 ("selinux: Fix ltp test connect-syscall failure") it no longer works and, in the above scenario connect() fails with EAFNOSUPPORT.

Fix the above falling back to the generic/old code when the address family is not AF_INET{4,6}, but leave the SCTP code path untouched, as it has specific constraints.

Fixes 68741a8adab9 ("selinux: Fix ltp test connect-syscall failure")
---
 security/selinux/hooks.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
security/selinux/hooks.c +4 -4
@@ -4572,7 +4572,7 @@ static int selinux_socket_connect_helper
 		struct lsm_network_audit net = {0,};
 		struct sockaddr_in *addr4 = NULL;
 		struct sockaddr_in6 *addr6 = NULL;
-		unsigned short snum;
+		unsigned short snum = 0;
 		u32 sid, perm;
 
 		/* sctp_connectx(3) calls via selinux_sctp_bind_connect()
@@ -4595,12 +4595,12 @@ static int selinux_socket_connect_helper
 			break;
 		default:
 			/* Note that SCTP services expect -EINVAL, whereas
-			 * others expect -EAFNOSUPPORT.
+			 * others must handle this at the protocol level:
+			 * connect(AF_UNSPEC) on a connected socket is
+			 * a documented way disconnect the socket.
 			 */
 			if (sksec->sclass == SECCLASS_SCTP_SOCKET)
 				return -EINVAL;
-			else
-				return -EAFNOSUPPORT;
 		}
 
 		err = sel_netport_sid(sk->sk_protocol, snum, &sid);
author maintainer
#28 lore raw

PATCH 28/46 vrf: sit mtu should not be updated when vrf netdev is the link

In reply to Greg Kroah-Hartman

From: Stephen Suryaputra <[email protected]>

[ Upstream commit ff6ab32bd4e073976e4d8797b4d514a172cfe6cb ]

VRF netdev mtu isn't typically set and have an mtu of 65536. When the link of a tunnel is set, the tunnel mtu is changed from 1480 to the link mtu minus tunnel header. In the case of VRF netdev is the link, then the tunnel mtu becomes 65516. So, fix it by not setting the tunnel mtu in this case.

---
 net/ipv6/sit.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/ipv6/sit.c +1 -1
@@ -1084,7 +1084,7 @@ static void ipip6_tunnel_bind_dev(struct
 	if (!tdev && tunnel->parms.link)
 		tdev = __dev_get_by_index(tunnel->net, tunnel->parms.link);
 
-	if (tdev) {
+	if (tdev && !netif_is_l3_master(tdev)) {
 		int t_hlen = tunnel->hlen + sizeof(struct iphdr);
 
 		dev->hard_header_len = tdev->hard_header_len + sizeof(struct iphdr);
author maintainer
#3 lore raw

PATCH 3/46 platform/x86: dell-laptop: fix rfkill functionality

In reply to Greg Kroah-Hartman

From: Mario Limonciello <[email protected]>

commit 6cc13c28da5beee0f706db6450e190709700b34a upstream.

When converting the driver two arguments were transposed leading to rfkill not working.

---
 drivers/platform/x86/dell-laptop.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/platform/x86/dell-laptop.c +3 -3
@@ -531,7 +531,7 @@ static void dell_rfkill_query(struct rfk
 		return;
 	}
 
-	dell_fill_request(&buffer, 0, 0x2, 0, 0);
+	dell_fill_request(&buffer, 0x2, 0, 0, 0);
 	ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
 	hwswitch = buffer.output[1];
 
@@ -562,7 +562,7 @@ static int dell_debugfs_show(struct seq_
 		return ret;
 	status = buffer.output[1];
 
-	dell_fill_request(&buffer, 0, 0x2, 0, 0);
+	dell_fill_request(&buffer, 0x2, 0, 0, 0);
 	hwswitch_ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
 	if (hwswitch_ret)
 		return hwswitch_ret;
@@ -647,7 +647,7 @@ static void dell_update_rfkill(struct wo
 	if (ret != 0)
 		return;
 
-	dell_fill_request(&buffer, 0, 0x2, 0, 0);
+	dell_fill_request(&buffer, 0x2, 0, 0, 0);
 	ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
 
 	if (ret == 0 && (status & BIT(0)))
author maintainer
#32 lore raw

PATCH 32/46 tuntap: fix dividing by zero in ebpf queue selection

In reply to Greg Kroah-Hartman

From: Jason Wang <[email protected]>

[ Upstream commit a35d310f03a692bf4798eb309a1950a06a150620 ]

We need check if tun->numqueues is zero (e.g for the persist device) before trying to use it for modular arithmetic.

Fixes 96f84061620c6("tun: add eBPF based queue selection method")
---
 drivers/net/tun.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/net/tun.c +6 -1
@@ -596,13 +596,18 @@ static u16 tun_automq_select_queue(struc
 static u16 tun_ebpf_select_queue(struct tun_struct *tun, struct sk_buff *skb)
 {
 	struct tun_prog *prog;
+	u32 numqueues;
 	u16 ret = 0;
 
+	numqueues = READ_ONCE(tun->numqueues);
+	if (!numqueues)
+		return 0;
+
 	prog = rcu_dereference(tun->steering_prog);
 	if (prog)
 		ret = bpf_prog_run_clear_cb(prog->prog, skb);
 
-	return ret % tun->numqueues;
+	return ret % numqueues;
 }
 
 static u16 tun_select_queue(struct net_device *dev, struct sk_buff *skb,
author maintainer
#4 lore raw

PATCH 4/46 hwmon: (pwm-fan) Disable PWM if fetching cooling data fails

In reply to Greg Kroah-Hartman

From: Stefan Wahren <[email protected]>

commit 53f1647da3e8fb3e89066798f0fdc045064d353d upstream.

In case pwm_fan_of_get_cooling_data() fails we should disable the PWM just like in the other error cases.

Fixes 2e5219c77183 ("hwmon: (pwm-fan) Read PWM FAN configuration from device tree")
Cc <[email protected]> # 4.14+
---
 drivers/hwmon/pwm-fan.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hwmon/pwm-fan.c +1 -1
@@ -271,7 +271,7 @@ static int pwm_fan_probe(struct platform
 
 	ret = pwm_fan_of_get_cooling_data(&pdev->dev, ctx);
 	if (ret)
-		return ret;
+		goto err_pwm_disable;
 
 	ctx->pwm_fan_state = ctx->pwm_fan_max_state;
 	if (IS_ENABLED(CONFIG_THERMAL)) {
author maintainer
#5 lore raw

PATCH 5/46 hwmon: (occ) Fix extended status bits

In reply to Greg Kroah-Hartman

From: Lei YU <[email protected]>

commit b88c5049219a7f322bb1fd65fc30d17472a23563 upstream.

The occ's extended status is checked and shown as sysfs attributes. But the code was incorrectly checking the "status" bits.
Fix it by checking the "ext_status" bits.

Fixes df04ced684d4 ("hwmon (occ): Add sysfs attributes for additional OCC data")
---
 drivers/hwmon/occ/sysfs.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/hwmon/occ/sysfs.c +4 -4
@@ -42,16 +42,16 @@ static ssize_t occ_sysfs_show(struct dev
 		val = !!(header->status & OCC_STAT_ACTIVE);
 		break;
 	case 2:
-		val = !!(header->status & OCC_EXT_STAT_DVFS_OT);
+		val = !!(header->ext_status & OCC_EXT_STAT_DVFS_OT);
 		break;
 	case 3:
-		val = !!(header->status & OCC_EXT_STAT_DVFS_POWER);
+		val = !!(header->ext_status & OCC_EXT_STAT_DVFS_POWER);
 		break;
 	case 4:
-		val = !!(header->status & OCC_EXT_STAT_MEM_THROTTLE);
+		val = !!(header->ext_status & OCC_EXT_STAT_MEM_THROTTLE);
 		break;
 	case 5:
-		val = !!(header->status & OCC_EXT_STAT_QUICK_DROP);
+		val = !!(header->ext_status & OCC_EXT_STAT_QUICK_DROP);
 		break;
 	case 6:
 		val = header->occ_state;
author maintainer
#7 lore raw

PATCH 7/46 i2c: core: ratelimit transfer when suspended errors

In reply to Greg Kroah-Hartman

From: Wolfram Sang <[email protected]>

commit 4db61c2a16fce2ef85d82751de4ba43a39347cfb upstream.

There are two problems with WARN_ON() here. One: It is not ratelimited.
Two: We don't see which adapter was used when trying to transfer something when already suspended. Implement a custom ratelimit once per adapter and use dev_WARN there. This fixes both issues. Drawback is that we don't see if multiple drivers are trying to transfer with the same adapter while suspended. They need to be discovered one after the other now. This is better than a high CPU load because a really broken driver might try to resend endlessly.

Fixes 9ac6cb5fbb17 ("i2c: add suspended flag and accessors for i2c adapters")
---
 drivers/i2c/i2c-core-base.c |    5 ++++-
 include/linux/i2c.h         |    3 ++-
 2 files changed, 6 insertions(+), 2 deletions(-)
drivers/i2c/i2c-core-base.c +4 -1
@@ -1871,8 +1871,11 @@ int __i2c_transfer(struct i2c_adapter *a
 
 	if (WARN_ON(!msgs || num < 1))
 		return -EINVAL;
-	if (WARN_ON(test_bit(I2C_ALF_IS_SUSPENDED, &adap->locked_flags)))
+	if (test_bit(I2C_ALF_IS_SUSPENDED, &adap->locked_flags)) {
+		if (!test_and_set_bit(I2C_ALF_SUSPEND_REPORTED, &adap->locked_flags))
+			dev_WARN(&adap->dev, "Transfer while suspended\n");
 		return -ESHUTDOWN;
+	}
 
 	if (adap->quirks && i2c_check_for_quirks(adap, msgs, num))
 		return -EOPNOTSUPP;
include/linux/i2c.h +2 -1
@@ -682,7 +682,8 @@ struct i2c_adapter {
 	int retries;
 	struct device dev;		/* the adapter device */
 	unsigned long locked_flags;	/* owned by the I2C core */
-#define I2C_ALF_IS_SUSPENDED	0
+#define I2C_ALF_IS_SUSPENDED		0
+#define I2C_ALF_SUSPEND_REPORTED	1
 
 	int nr;
 	char name[48];
author maintainer
#9 lore raw

PATCH 9/46 virt: vbox: Sanity-check parameter types for hgcm-calls coming from userspace

In reply to Greg Kroah-Hartman

From: Hans de Goede <[email protected]>

commit cf4f2ad6b87dda2dbe0573b1ebeb0273f8d4aac6 upstream.

Userspace can make host function calls, called hgcm-calls through the /dev/vboxguest device.

In this case we should not accept all hgcm-function-parameter-types, some are only valid for in kernel calls.

This commit adds proper hgcm-function-parameter-type validation to the ioctl for doing a hgcm-call from userspace.

---
 drivers/virt/vboxguest/vboxguest_core.c |   31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
drivers/virt/vboxguest/vboxguest_core.c +31 -0
@@ -1298,6 +1298,20 @@ static int vbg_ioctl_hgcm_disconnect(str
 	return ret;
 }
 
+static bool vbg_param_valid(enum vmmdev_hgcm_function_parameter_type type)
+{
+	switch (type) {
+	case VMMDEV_HGCM_PARM_TYPE_32BIT:
+	case VMMDEV_HGCM_PARM_TYPE_64BIT:
+	case VMMDEV_HGCM_PARM_TYPE_LINADDR:
+	case VMMDEV_HGCM_PARM_TYPE_LINADDR_IN:
+	case VMMDEV_HGCM_PARM_TYPE_LINADDR_OUT:
+		return true;
+	default:
+		return false;
+	}
+}
+
 static int vbg_ioctl_hgcm_call(struct vbg_dev *gdev,
 			       struct vbg_session *session, bool f32bit,
 			       struct vbg_ioctl_hgcm_call *call)
@@ -1333,6 +1347,23 @@ static int vbg_ioctl_hgcm_call(struct vb
 	}
 	call->hdr.size_out = actual_size;
 
+	/* Validate parameter types */
+	if (f32bit) {
+		struct vmmdev_hgcm_function_parameter32 *parm =
+			VBG_IOCTL_HGCM_CALL_PARMS32(call);
+
+		for (i = 0; i < call->parm_count; i++)
+			if (!vbg_param_valid(parm[i].type))
+				return -EINVAL;
+	} else {
+		struct vmmdev_hgcm_function_parameter *parm =
+			VBG_IOCTL_HGCM_CALL_PARMS(call);
+
+		for (i = 0; i < call->parm_count; i++)
+			if (!vbg_param_valid(parm[i].type))
+				return -EINVAL;
+	}
+
 	/*
 	 * Validate the client id.
 	 */

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 5.1.3-stable review

This is the start of the stable review cycle for the 5.1.3 release. There are 46 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri 17 May 2019 09:04:22 AM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.3-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.1.3-rc1

Damien Le Moal <[email protected]>
f2fs: Fix use of number of devices

Dexuan Cui <[email protected]>
PCI: hv: Add pci_destroy_slot() in pci_devices_present_work(), if necessary

Dexuan Cui <[email protected]>
PCI: hv: Add hv_pci_remove_slots() when we unload the driver

Dexuan Cui <[email protected]>
PCI: hv: Fix a memory leak in hv_eject_device_work()

YueHaibing <[email protected]>
virtio_ring: Fix potential mem leak in virtqueue_add_indirect_packed

Laurentiu Tudor <[email protected]>
powerpc/booke64: set RI in default MSR

Russell Currey <[email protected]>
powerpc/powernv/idle: Restore IAMR after idle

Rick Lindsley <[email protected]>
powerpc/book3s/64: check for NULL pointer in pgd_alloc()

Dan Carpenter <[email protected]>
drivers/virt/fsl_hypervisor.c: prevent integer overflow in ioctl

Dan Carpenter <[email protected]>
drivers/virt/fsl_hypervisor.c: dereferencing error pointers in ioctl

Paul Bolle <[email protected]>
isdn: bas_gigaset: use usb_fill_int_urb() properly

Eric Dumazet <[email protected]>
flow_dissector: disable preemption around BPF calls

Heiner Kallweit <[email protected]>
net: phy: fix phy_validate_pause

Jason Wang <[email protected]>

    tuntap: synchronize through tfiles array instead of tun->numqueues

Jason Wang <[email protected]>
tuntap: fix dividing by zero in ebpf queue selection

Oliver Neukum <[email protected]>
aqc111: fix double endianness swap on BE

Oliver Neukum <[email protected]>
aqc111: fix writing to the phy on BE

Oliver Neukum <[email protected]>
aqc111: fix endianness issue in aqc111_change_mtu

Stephen Suryaputra <[email protected]>
vrf: sit mtu should not be updated when vrf netdev is the link

Hangbin Liu <[email protected]>
vlan: disable SIOCSHWTSTAMP in container

Parthasarathy Bhuvaragan <[email protected]>
tipc: fix hanging clients using poll with EPOLLOUT flag

Paolo Abeni <[email protected]>
selinux: do not report error on connect(AF_UNSPEC)

YueHaibing <[email protected]>
packet: Fix error path in packet_init

Christophe Leroy <[email protected]>
net: ucc_geth - fix Oops when changing number of buffers in the ring

Thomas Bogendoerfer <[email protected]>
net: seeq: fix crash caused by not set dev.parent

Harini Katakam <[email protected]>
net: macb: Change interrupt and napi enable order in open

Corentin Labbe <[email protected]>
net: ethernet: stmmac: dwmac-sun8i: enable support of unicast filtering

YueHaibing <[email protected]>
net: dsa: Fix error cleanup path in dsa_init_module

David Ahern <[email protected]>
ipv4: Fix raw socket lookup for local traffic

Hangbin Liu <[email protected]>
fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied

Laurentiu Tudor <[email protected]>
dpaa_eth: fix SG frame cleanup

Tobin C. Harding <[email protected]>
bridge: Fix error path for kobject_init_and_add()

Jarod Wilson <[email protected]>
bonding: fix arp_validate toggling in active-backup mode

Nigel Croxon <[email protected]>
Don't jump to compute_result state from check_result state

Gustavo A. R. Silva <[email protected]>
rtlwifi: rtl8723ae: Fix missing break in switch statement

Petr Štetiar <[email protected]>
mwl8k: Fix rate_idx underflow

Johan Hovold <[email protected]>
USB: serial: fix unthrottle races

Hans de Goede <[email protected]>
virt: vbox: Sanity-check parameter types for hgcm-calls coming from userspace

Andrea Parri <[email protected]>
kernfs: fix barrier usage in __kernfs_new_node()

Wolfram Sang <[email protected]>
i2c: core: ratelimit 'transfer when suspended' errors

Kees Cook <[email protected]>
selftests/seccomp: Handle namespace failures gracefully

Lei YU <[email protected]>
hwmon: (occ) Fix extended status bits

Stefan Wahren <[email protected]>
hwmon: (pwm-fan) Disable PWM if fetching cooling data fails

Mario Limonciello <[email protected]>
platform/x86: dell-laptop: fix rfkill functionality

Jiaxun Yang <[email protected]>
platform/x86: thinkpad_acpi: Disable Bluetooth for some machines

Gustavo A. R. Silva <[email protected]>
platform/x86: sony-laptop: Fix unintentional fall-through

-------------

Diffstat:

 Makefile                                           |  4 +-
 arch/powerpc/include/asm/book3s/64/pgalloc.h       |  3 +
 arch/powerpc/include/asm/reg_booke.h               |  2 +-
 arch/powerpc/kernel/idle_book3s.S                  | 20 ++++++
 drivers/hwmon/occ/sysfs.c                          |  8 +--
 drivers/hwmon/pwm-fan.c                            |  2 +-
 drivers/i2c/i2c-core-base.c                        |  5 +-
 drivers/isdn/gigaset/bas-gigaset.c                 |  9 +--
 drivers/md/raid5.c                                 | 19 ++----
 drivers/net/bonding/bond_options.c                 |  7 ---
 drivers/net/ethernet/cadence/macb_main.c           |  6 +-
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c     |  2 +-
 drivers/net/ethernet/freescale/ucc_geth_ethtool.c  |  8 +--
 drivers/net/ethernet/seeq/sgiseeq.c                |  1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c  |  2 +
 drivers/net/phy/phy_device.c                       | 11 ++--
 drivers/net/tun.c                                  | 14 ++++-
 drivers/net/usb/aqc111.c                           | 31 +++++++---
 drivers/net/wireless/marvell/mwl8k.c               | 13 ++--
 .../net/wireless/realtek/rtlwifi/rtl8723ae/hw.c    |  1 +
 drivers/pci/controller/pci-hyperv.c                | 23 +++++++
 drivers/platform/x86/dell-laptop.c                 |  6 +-
 drivers/platform/x86/sony-laptop.c                 |  8 ++-
 drivers/platform/x86/thinkpad_acpi.c               | 72 +++++++++++++++++++++-
 drivers/usb/serial/generic.c                       | 39 +++++++++---
 drivers/virt/fsl_hypervisor.c                      | 29 +++++----
 drivers/virt/vboxguest/vboxguest_core.c            | 31 ++++++++++
 drivers/virtio/virtio_ring.c                       |  1 +
 fs/f2fs/data.c                                     | 17 +++--
 fs/f2fs/f2fs.h                                     | 13 +++-
 fs/f2fs/file.c                                     |  2 +-
 fs/f2fs/gc.c                                       |  2 +-
 fs/f2fs/segment.c                                  | 13 ++--
 fs/kernfs/dir.c                                    |  5 +-
 include/linux/i2c.h                                |  3 +-
 net/8021q/vlan_dev.c                               |  4 +-
 net/bridge/br_if.c                                 | 13 ++--
 net/core/fib_rules.c                               |  6 +-
 net/core/flow_dissector.c                          |  3 +
 net/dsa/dsa.c                                      | 11 +++-
 net/ipv4/raw.c                                     |  4 +-
 net/ipv6/sit.c                                     |  2 +-
 net/packet/af_packet.c                             | 25 ++++++--
 net/tipc/socket.c                                  |  4 +-
 security/selinux/hooks.c                           |  8 +--
 tools/testing/selftests/seccomp/seccomp_bpf.c      | 43 +++++++------
 46 files changed, 399 insertions(+), 156 deletions(-)
author maintainer
#34 lore raw

PATCH 34/46 net: phy: fix phy_validate_pause

From: Heiner Kallweit <[email protected]>

[ Upstream commit b4010af981ac8cdf1f7f58eb6b131c482e5dee02 ]

We have valid scenarios where ETHTOOL_LINK_MODE_Pause_BIT doesn't need to be supported. Therefore extend the first check to check for rx_pause being set.

See also phy_set_asym_pause:
rx=0 and tx=1: advertise asym pause only
rx=0 and tx=0: stop advertising both pause modes

The fixed commit isn't wrong, it's just the one that introduced the linkmode bitmaps.

Fixes 3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode")
---
 drivers/net/phy/phy_device.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
drivers/net/phy/phy_device.c +7 -4
@@ -2044,11 +2044,14 @@ bool phy_validate_pause(struct phy_devic
 			struct ethtool_pauseparam *pp)
 {
 	if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
-			       phydev->supported) ||
-	    (!linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
-				phydev->supported) &&
-	     pp->rx_pause != pp->tx_pause))
+			       phydev->supported) && pp->rx_pause)
 		return false;
+
+	if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+			       phydev->supported) &&
+	    pp->rx_pause != pp->tx_pause)
+		return false;
+
 	return true;
 }
 EXPORT_SYMBOL(phy_validate_pause);
author maintainer
#43 lore raw

PATCH 43/46 PCI: hv: Fix a memory leak in hv_eject_device_work()

In reply to Greg Kroah-Hartman

From: Dexuan Cui <[email protected]>

commit 05f151a73ec2b23ffbff706e5203e729a995cdc2 upstream.

When a device is created in new_pcichild_device(), hpdev->refs is set to 2 (i.e. the initial value of 1 plus the get_pcichild()).

When we hot remove the device from the host, in a Linux VM we first call hv_pci_eject_device(), which increases hpdev->refs by get_pcichild() and then schedules a work of hv_eject_device_work(), so hpdev->refs becomes 3 (let's ignore the paired get/put_pcichild() in other places). But in hv_eject_device_work(), currently we only call put_pcichild() twice, meaning the 'hpdev' struct can't be freed in put_pcichild().

Add one put_pcichild() to fix the memory leak.

The device can also be removed when we run "rmmod pci-hyperv". On this path (hv_pci_remove() -> hv_pci_bus_exit() -> hv_pci_devices_present()), hpdev->refs is 2, and we do correctly call put_pcichild() twice in pci_devices_present_work().

Fixes 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
[[email protected]: commit log rework]
---
 drivers/pci/controller/pci-hyperv.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/pci/controller/pci-hyperv.c +3 -0
@@ -1900,6 +1900,9 @@ static void hv_eject_device_work(struct
 			 sizeof(*ejct_pkt), (unsigned long)&ctxt.pkt,
 			 VM_PKT_DATA_INBAND, 0);
 
+	/* For the get_pcichild() in hv_pci_eject_device() */
+	put_pcichild(hpdev);
+	/* For the two refs got in new_pcichild_device() */
 	put_pcichild(hpdev);
 	put_pcichild(hpdev);
 	put_hvpcibus(hpdev->hbus);
author maintainer
#44 lore raw

PATCH 44/46 PCI: hv: Add hv_pci_remove_slots() when we unload the driver

In reply to Greg Kroah-Hartman

From: Dexuan Cui <[email protected]>

commit 15becc2b56c6eda3d9bf5ae993bafd5661c1fad1 upstream.

When we unload the pci-hyperv host controller driver, the host does not send us a PCI_EJECT message.

In this case we also need to make sure the sysfs PCI slot directory is removed, otherwise a command on a slot file eg:

"cat /sys/bus/pci/slots/2/address"

will trigger a

"BUG: unable to handle kernel paging request"

and, if we unload/reload the driver several times we would end up with stale slot entries in PCI slot directories in /sys/bus/pci/slots/

root@localhost:~# ls -rtl  /sys/bus/pci/slots/
total 0
drwxr-xr-x 2 root root 0 Feb  7 10:49 2
drwxr-xr-x 2 root root 0 Feb  7 10:49 2-1
drwxr-xr-x 2 root root 0 Feb  7 10:51 2-2

Add the missing code to remove the PCI slot and fix the current behaviour.

Fixes a15f2c08c708 ("PCI: hv: support reporting serial number as slot information")
[[email protected]: reformatted the log]
---
 drivers/pci/controller/pci-hyperv.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)
drivers/pci/controller/pci-hyperv.c +16 -0
@@ -1486,6 +1486,21 @@ static void hv_pci_assign_slots(struct h
 	}
 }
 
+/*
+ * Remove entries in sysfs pci slot directory.
+ */
+static void hv_pci_remove_slots(struct hv_pcibus_device *hbus)
+{
+	struct hv_pci_dev *hpdev;
+
+	list_for_each_entry(hpdev, &hbus->children, list_entry) {
+		if (!hpdev->pci_slot)
+			continue;
+		pci_destroy_slot(hpdev->pci_slot);
+		hpdev->pci_slot = NULL;
+	}
+}
+
 /**
  * create_root_hv_pci_bus() - Expose a new root PCI bus
  * @hbus:	Root PCI bus, as understood by this driver
@@ -2680,6 +2695,7 @@ static int hv_pci_remove(struct hv_devic
 		pci_lock_rescan_remove();
 		pci_stop_root_bus(hbus->pci_bus);
 		pci_remove_root_bus(hbus->pci_bus);
+		hv_pci_remove_slots(hbus);
 		pci_unlock_rescan_remove();
 		hbus->state = hv_pcibus_removed;
 	}
author maintainer
#45 lore raw

PATCH 45/46 PCI: hv: Add pci_destroy_slot() in pci_devices_present_work(), if necessary

In reply to Greg Kroah-Hartman

From: Dexuan Cui <[email protected]>

commit 340d455699400f2c2c0f9b3f703ade3085cdb501 upstream.

When we hot-remove a device, usually the host sends us a PCI_EJECT message, and a PCI_BUS_RELATIONS message with bus_rel->device_count == 0.

When we execute the quick hot-add/hot-remove test, the host may not send us the PCI_EJECT message if the guest has not fully finished the initialization by sending the PCI_RESOURCES_ASSIGNED* message to the host, so it's potentially unsafe to only depend on the pci_destroy_slot() in hv_eject_device_work() because the code path

create_root_hv_pci_bus()
-> hv_pci_assign_slots()

is not called in this case. Note: in this case, the host still sends the guest a PCI_BUS_RELATIONS message with bus_rel->device_count == 0.

In the quick hot-add/hot-remove test, we can have such a race before the code path

pci_devices_present_work()
-> new_pcichild_device()

adds the new device into the hbus->children list, we may have already received the PCI_EJECT message, and since the tasklet handler

hv_pci_onchannelcallback()

may fail to find the "hpdev" by calling

get_pcichild_wslot(hbus, dev_message->wslot.slot)

hv_pci_eject_device() is not called; Later, by continuing execution

create_root_hv_pci_bus()
-> hv_pci_assign_slots()

creates the slot and the PCI_BUS_RELATIONS message with bus_rel->device_count == 0 removes the device from hbus->children, and we end up being unable to remove the slot in

hv_pci_remove()
-> hv_pci_remove_slots()

Remove the slot in pci_devices_present_work() when the device is removed to address this race.

pci_devices_present_work() and hv_eject_device_work() run in the singled-threaded hbus->wq, so there is not a double-remove issue for the slot.

We cannot offload hv_pci_eject_device() from hv_pci_onchannelcallback() to the workqueue, because we need the hv_pci_onchannelcallback() synchronously call hv_pci_eject_device() to poll the channel ringbuffer to work around the "hangs in hv_compose_msi_msg()" issue fixed in commit de0aa7b2f97d ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()")

Fixes a15f2c08c708 ("PCI: hv: support reporting serial number as slot information")
[[email protected]: rewritten commit log]
---
 drivers/pci/controller/pci-hyperv.c |    4 ++++
 1 file changed, 4 insertions(+)
drivers/pci/controller/pci-hyperv.c +4 -0
@@ -1776,6 +1776,10 @@ static void pci_devices_present_work(str
 		hpdev = list_first_entry(&removed, struct hv_pci_dev,
 					 list_entry);
 		list_del(&hpdev->list_entry);
+
+		if (hpdev->pci_slot)
+			pci_destroy_slot(hpdev->pci_slot);
+
 		put_pcichild(hpdev);
 	}
 
author maintainer
#35 lore raw

PATCH 35/46 flow_dissector: disable preemption around BPF calls

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit b1c17a9a353878602fd5bfe9103e4afe5e9a3f96 ]

Various things in eBPF really require us to disable preemption before running an eBPF program.

syzbot reported :

BUG: assuming atomic context at net/core/flow_dissector.c:737

in_atomic(): 0, irqs_disabled(): 0, pid: 24710, name: syz-executor.3
2 locks held by syz-executor.3/24710:
#0: 00000000e81a4bf1 (&tfile->napi_mutex){+.+.}, at: tun_get_user+0x168e/0x3ff0 drivers/net/tun.c:1850 #1: 00000000254afebd (rcu_read_lock){....}, at: __skb_flow_dissect+0x1e1/0x4bb0 net/core/flow_dissector.c:822

CPU: 1 PID: 24710 Comm: syz-executor.3 Not tainted 5.1.0+ #6
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 __cant_sleep kernel/sched/core.c:6165 [inline]
 __cant_sleep.cold+0xa3/0xbb kernel/sched/core.c:6142
 bpf_flow_dissect+0xfe/0x390 net/core/flow_dissector.c:737
 __skb_flow_dissect+0x362/0x4bb0 net/core/flow_dissector.c:853
 skb_flow_dissect_flow_keys_basic include/linux/skbuff.h:1322 [inline]
 skb_probe_transport_header include/linux/skbuff.h:2500 [inline]
 skb_probe_transport_header include/linux/skbuff.h:2493 [inline]
 tun_get_user+0x2cfe/0x3ff0 drivers/net/tun.c:1940
 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2037
 call_write_iter include/linux/fs.h:1872 [inline]
 do_iter_readv_writev+0x5fd/0x900 fs/read_write.c:693
 do_iter_write fs/read_write.c:970 [inline]
 do_iter_write+0x184/0x610 fs/read_write.c:951
 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1015
 do_writev+0x15b/0x330 fs/read_write.c:1058
 __do_sys_writev fs/read_write.c:1131 [inline]
 __se_sys_writev fs/read_write.c:1128 [inline]
 __x64_sys_writev+0x75/0xb0 fs/read_write.c:1128
 do_syscall_64+0x103/0x670 arch/x86/entry/common.c:298
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes d58e468b1112 ("flow_dissector: implements flow dissector BPF hook")
Cc Petar Penkov <[email protected]>
Cc Stanislav Fomichev <[email protected]>
---
 net/core/flow_dissector.c |    3 +++
 1 file changed, 3 insertions(+)
net/core/flow_dissector.c +3 -0
@@ -712,7 +712,10 @@ bool __skb_flow_bpf_dissect(struct bpf_p
 	flow_keys->thoff = flow_keys->nhoff;
 
 	bpf_compute_data_pointers((struct sk_buff *)skb);
+
+	preempt_disable();
 	result = BPF_PROG_RUN(prog, skb);
+	preempt_enable();
 
 	/* Restore state */
 	memcpy(cb, &cb_saved, sizeof(cb_saved));
author maintainer
#36 lore raw

PATCH 36/46 isdn: bas_gigaset: use usb_fill_int_urb() properly

In reply to Greg Kroah-Hartman

From: Paul Bolle <[email protected]>

[ Upstream commit 4014dfae3ccaaf3ec19c9ae0691a3f14e7132eae ]

The switch to make bas_gigaset use usb_fill_int_urb() - instead of filling that urb "by hand" - missed the subtle ordering of the previous code.

See, before the switch urb->dev was set to a member somewhere deep in a complicated structure and then supplied to usb_rcvisocpipe() and usb_sndisocpipe(). After that switch urb->dev wasn't set to anything specific before being supplied to those two macros. This triggers a nasty oops:

    BUG: unable to handle kernel NULL pointer dereference at 00000000
    #PF error: [normal kernel read fault]
    *pde = 00000000
    Oops: 0000 [#1] SMP
    CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.1.0-0.rc4.1.local0.fc28.i686 #1
    Hardware name: IBM 2525FAG/2525FAG, BIOS 74ET64WW (2.09 ) 12/14/2006
    EIP: gigaset_init_bchannel+0x89/0x320 [bas_gigaset]
    Code: 75 07 83 8b 84 00 00 00 40 8d 47 74 c7 07 01 00 00 00 89 45 f0 8b 44 b7 68 85 c0 0f 84 6a 02 00 00 8b 48 28 8b 93 88 00 00 00 <8b> 09 8d 54 12 03 c1 e2 0f c1 e1 08 09 ca 8b 8b 8c 00 00 00 80 ca
    EAX: f05ec200 EBX: ed404200 ECX: 00000000 EDX: 00000000
    ESI: 00000000 EDI: f065a000 EBP: f30c9f40 ESP: f30c9f20
    DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010086
    CR0: 80050033 CR2: 00000000 CR3: 0ddc7000 CR4: 000006d0
    Call Trace:
     <SOFTIRQ>
     ? gigaset_isdn_connD+0xf6/0x140 [gigaset]
     gigaset_handle_event+0x173e/0x1b90 [gigaset]
     tasklet_action_common.isra.16+0x4e/0xf0
     tasklet_action+0x1e/0x20
     __do_softirq+0xb2/0x293
     ? __irqentry_text_end+0x3/0x3
     call_on_stack+0x45/0x50
     </SOFTIRQ>
     ? irq_exit+0xb5/0xc0
     ? do_IRQ+0x78/0xd0
     ? acpi_idle_enter_s2idle+0x50/0x50
     ? common_interrupt+0xd4/0xdc
     ? acpi_idle_enter_s2idle+0x50/0x50
     ? sched_cpu_activate+0x1b/0xf0
     ? acpi_fan_resume.cold.7+0x9/0x18
     ? cpuidle_enter_state+0x152/0x4c0
     ? cpuidle_enter+0x14/0x20
     ? call_cpuidle+0x21/0x40
     ? do_idle+0x1c8/0x200
     ? cpu_startup_entry+0x25/0x30
     ? rest_init+0x88/0x8a
     ? arch_call_rest_init+0xd/0x19
     ? start_kernel+0x42f/0x448
     ? i386_start_kernel+0xac/0xb0
     ? startup_32_smp+0x164/0x168
    Modules linked in: ppp_generic slhc capi bas_gigaset gigaset kernelcapi nf_conntrack_netbios_ns nf_conntrack_broadcast xt_CT ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c iptable_mangle iptable_raw iptable_security ebtable_filter ebtables ip6table_filter ip6_tables sunrpc ipw2200 iTCO_wdt gpio_ich snd_intel8x0 libipw iTCO_vendor_support snd_ac97_codec lib80211 ppdev ac97_bus snd_seq cfg80211 snd_seq_device pcspkr thinkpad_acpi lpc_ich snd_pcm i2c_i801 snd_timer ledtrig_audio snd soundcore rfkill parport_pc parport pcc_cpufreq acpi_cpufreq i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sdhci_pci sysimgblt cqhci fb_sys_fops drm sdhci mmc_core tg3 ata_generic serio_raw yenta_socket pata_acpi video
    CR2: 0000000000000000
    ---[ end trace 1fe07487b9200c73 ]---
    EIP: gigaset_init_bchannel+0x89/0x320 [bas_gigaset]
    Code: 75 07 83 8b 84 00 00 00 40 8d 47 74 c7 07 01 00 00 00 89 45 f0 8b 44 b7 68 85 c0 0f 84 6a 02 00 00 8b 48 28 8b 93 88 00 00 00 <8b> 09 8d 54 12 03 c1 e2 0f c1 e1 08 09 ca 8b 8b 8c 00 00 00 80 ca
    EAX: f05ec200 EBX: ed404200 ECX: 00000000 EDX: 00000000
    ESI: 00000000 EDI: f065a000 EBP: f30c9f40 ESP: cddcb3bc
    DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010086
    CR0: 80050033 CR2: 00000000 CR3: 0ddc7000 CR4: 000006d0
    Kernel panic - not syncing: Fatal exception in interrupt
    Kernel Offset: 0xcc00000 from 0xc0400000 (relocation range: 0xc0000000-0xf6ffdfff)
    ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

No-one noticed because this Oops is apparently only triggered by setting up an ISDN data connection on a live ISDN line on a gigaset base (ie, the PBX that the gigaset driver support). Very few people do that running present day kernels.

Anyhow, a little code reorganization makes this problem go away, while avoiding the subtle ordering that was used in the past. So let's do that.

Fixes 78c696c19578 ("isdn: gigaset: use usb_fill_int_urb()")
---
 drivers/isdn/gigaset/bas-gigaset.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/isdn/gigaset/bas-gigaset.c +5 -4
@@ -958,6 +958,7 @@ static void write_iso_callback(struct ur
  */
 static int starturbs(struct bc_state *bcs)
 {
+	struct usb_device *udev = bcs->cs->hw.bas->udev;
 	struct bas_bc_state *ubc = bcs->hw.bas;
 	struct urb *urb;
 	int j, k;
@@ -975,8 +976,8 @@ static int starturbs(struct bc_state *bc
 			rc = -EFAULT;
 			goto error;
 		}
-		usb_fill_int_urb(urb, bcs->cs->hw.bas->udev,
-				 usb_rcvisocpipe(urb->dev, 3 + 2 * bcs->channel),
+		usb_fill_int_urb(urb, udev,
+				 usb_rcvisocpipe(udev, 3 + 2 * bcs->channel),
 				 ubc->isoinbuf + k * BAS_INBUFSIZE,
 				 BAS_INBUFSIZE, read_iso_callback, bcs,
 				 BAS_FRAMETIME);
@@ -1006,8 +1007,8 @@ static int starturbs(struct bc_state *bc
 			rc = -EFAULT;
 			goto error;
 		}
-		usb_fill_int_urb(urb, bcs->cs->hw.bas->udev,
-				 usb_sndisocpipe(urb->dev, 4 + 2 * bcs->channel),
+		usb_fill_int_urb(urb, udev,
+				 usb_sndisocpipe(udev, 4 + 2 * bcs->channel),
 				 ubc->isooutbuf->data,
 				 sizeof(ubc->isooutbuf->data),
 				 write_iso_callback, &ubc->isoouturbs[k],
author maintainer
#38 lore raw

PATCH 38/46 drivers/virt/fsl_hypervisor.c: prevent integer overflow in ioctl

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

commit 6a024330650e24556b8a18cc654ad00cfecf6c6c upstream.

The "param.count" value is a u64 thatcomes from the user. The code later in the function assumes that param.count is at least one and if it's not then it leads to an Oops when we dereference the ZERO_SIZE_PTR.

Also the addition can have an integer overflow which would lead us to allocate a smaller "pages" array than required. I can't immediately tell what the possible run times implications are, but it's safest to prevent the overflow.

Fixes 6db7199407ca ("drivers/virt: introduce Freescale hypervisor management driver")
Cc Timur Tabi <[email protected]>
Cc Mihai Caraman <[email protected]>
Cc Kumar Gala <[email protected]>
---
 drivers/virt/fsl_hypervisor.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/virt/fsl_hypervisor.c +3 -0
@@ -215,6 +215,9 @@ static long ioctl_memcpy(struct fsl_hv_i
 	 * hypervisor.
 	 */
 	lb_offset = param.local_vaddr & (PAGE_SIZE - 1);
+	if (param.count == 0 ||
+	    param.count > U64_MAX - lb_offset - PAGE_SIZE + 1)
+		return -EINVAL;
 	num_pages = (param.count + lb_offset + PAGE_SIZE - 1) >> PAGE_SHIFT;
 
 	/* Allocate the buffers we need */
author maintainer
#40 lore raw

PATCH 40/46 powerpc/powernv/idle: Restore IAMR after idle

In reply to Greg Kroah-Hartman

From: Russell Currey <[email protected]>

commit a3f3072db6cad40895c585dce65e36aab997f042 upstream.

Without restoring the IAMR after idle, execution prevention on POWER9 with Radix MMU is overwritten and the kernel can freely execute userspace without faulting.

This is necessary when returning from any stop state that modifies user state, as well as hypervisor state.

To test how this fails without this patch, load the lkdtm driver and do the following:

  $ echo EXEC_USERSPACE > /sys/kernel/debug/provoke-crash/DIRECT

which won't fault, then boot the kernel with powersave=off, where it will fault. Applying this patch will fix this.

Fixes 3b10d0095a1e ("powerpc/mm/radix: Prevent kernel execution of user space")
Cc [email protected] # v4.10+
---
 arch/powerpc/kernel/idle_book3s.S |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
arch/powerpc/kernel/idle_book3s.S +20 -0
@@ -170,6 +170,9 @@ core_idle_lock_held:
 	bne-	core_idle_lock_held
 	blr
 
+/* Reuse an unused pt_regs slot for IAMR */
+#define PNV_POWERSAVE_IAMR	_DAR
+
 /*
  * Pass requested state in r3:
  *	r3 - PNV_THREAD_NAP/SLEEP/WINKLE in POWER8
@@ -200,6 +203,12 @@ pnv_powersave_common:
 	/* Continue saving state */
 	SAVE_GPR(2, r1)
 	SAVE_NVGPRS(r1)
+
+BEGIN_FTR_SECTION
+	mfspr	r5, SPRN_IAMR
+	std	r5, PNV_POWERSAVE_IAMR(r1)
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
+
 	mfcr	r5
 	std	r5,_CCR(r1)
 	std	r1,PACAR1(r13)
@@ -924,6 +933,17 @@ BEGIN_FTR_SECTION
 END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
 	REST_NVGPRS(r1)
 	REST_GPR(2, r1)
+
+BEGIN_FTR_SECTION
+	/* IAMR was saved in pnv_powersave_common() */
+	ld	r5, PNV_POWERSAVE_IAMR(r1)
+	mtspr	SPRN_IAMR, r5
+	/*
+	 * We don't need an isync here because the upcoming mtmsrd is
+	 * execution synchronizing.
+	 */
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
+
 	ld	r4,PACAKMSR(r13)
 	ld	r5,_LINK(r1)
 	ld	r6,_CCR(r1)
author maintainer
#41 lore raw

PATCH 41/46 powerpc/booke64: set RI in default MSR

In reply to Greg Kroah-Hartman

From: Laurentiu Tudor <[email protected]>

commit 5266e58d6cd90ac85c187d673093ad9cb649e16d upstream.

Set RI in the default kernel's MSR so that the architected way of detecting unrecoverable machine check interrupts has a chance to work. This is inline with the MSR setup of the rest of booke powerpc architectures configured here.

---
 arch/powerpc/include/asm/reg_booke.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/include/asm/reg_booke.h +1 -1
@@ -41,7 +41,7 @@
 #if defined(CONFIG_PPC_BOOK3E_64)
 #define MSR_64BIT	MSR_CM
 
-#define MSR_		(MSR_ME | MSR_CE)
+#define MSR_		(MSR_ME | MSR_RI | MSR_CE)
 #define MSR_KERNEL	(MSR_ | MSR_64BIT)
 #define MSR_USER32	(MSR_ | MSR_PR | MSR_EE)
 #define MSR_USER64	(MSR_USER32 | MSR_64BIT)
author maintainer
#42 lore raw

PATCH 42/46 virtio_ring: Fix potential mem leak in virtqueue_add_indirect_packed

In reply to Greg Kroah-Hartman

From: YueHaibing <[email protected]>

commit df0bfe7501e9319546ea380d39674a4179e059c3 upstream.

'desc' should be freed before leaving from err handing path.

Fixes 1ce9e6055fa0 ("virtio_ring: introduce packed ring support")

[email protected]

---
 drivers/virtio/virtio_ring.c |    1 +
 1 file changed, 1 insertion(+)
drivers/virtio/virtio_ring.c +1 -0
@@ -1004,6 +1004,7 @@ static int virtqueue_add_indirect_packed
 
 	if (unlikely(vq->vq.num_free < 1)) {
 		pr_debug("Can't add buf len 1 - avail = 0\n");
+		kfree(desc);
 		END_USE(vq);
 		return -ENOSPC;
 	}
author maintainer
#33 lore raw

PATCH 33/46 tuntap: synchronize through tfiles array instead of tun->numqueues

In reply to Greg Kroah-Hartman

From: Jason Wang <[email protected]>

[ Upstream commit 9871a9e47a2646fe30ae7fd2e67668a8d30912f6 ]

When a queue(tfile) is detached through __tun_detach(), we move the last enabled tfile to the position where detached one sit but don't NULL out last position. We expect to synchronize the datapath through tun->numqueues. Unfortunately, this won't work since we're lacking sufficient mechanism to order or synchronize the access to tun->numqueues.

To fix this, NULL out the last position during detaching and check RCU protected tfile against NULL instead of checking tun->numqueues in datapath.

Cc YueHaibing <[email protected]>
Cc Cong Wang <[email protected]>
Cc weiyongjun (A) <[email protected]>
Cc Eric Dumazet <[email protected]>
Fixes c8d68e6be1c3b ("tuntap: multiqueue support")
---
 drivers/net/tun.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/net/tun.c +6 -1
@@ -705,6 +705,8 @@ static void __tun_detach(struct tun_file
 				   tun->tfiles[tun->numqueues - 1]);
 		ntfile = rtnl_dereference(tun->tfiles[index]);
 		ntfile->queue_index = index;
+		rcu_assign_pointer(tun->tfiles[tun->numqueues - 1],
+				   NULL);
 
 		--tun->numqueues;
 		if (clean) {
@@ -1087,7 +1089,7 @@ static netdev_tx_t tun_net_xmit(struct s
 	tfile = rcu_dereference(tun->tfiles[txq]);
 
 	/* Drop packet if interface is not attached */
-	if (txq >= tun->numqueues)
+	if (!tfile)
 		goto drop;
 
 	if (!rcu_dereference(tun->steering_prog))
@@ -1310,6 +1312,7 @@ static int tun_xdp_xmit(struct net_devic
 
 	rcu_read_lock();
 
+resample:
 	numqueues = READ_ONCE(tun->numqueues);
 	if (!numqueues) {
 		rcu_read_unlock();
@@ -1318,6 +1321,8 @@ static int tun_xdp_xmit(struct net_devic
 
 	tfile = rcu_dereference(tun->tfiles[smp_processor_id() %
 					    numqueues]);
+	if (unlikely(!tfile))
+		goto resample;
 
 	spin_lock(&tfile->tx_ring.producer_lock);
 	for (i = 0; i < n; i++) {
author maintainer
#39 lore raw

PATCH 39/46 powerpc/book3s/64: check for NULL pointer in pgd_alloc()

In reply to Greg Kroah-Hartman

From: Rick Lindsley <[email protected]>

commit f39356261c265a0689d7ee568132d516e8b6cecc upstream.

When the memset code was added to pgd_alloc(), it failed to consider that kmem_cache_alloc() can return NULL. It's uncommon, but not impossible under heavy memory contention. Example oops:

  Unable to handle kernel paging request for data at address 0x00000000
  Faulting instruction address: 0xc0000000000a4000
  Oops: Kernel access of bad area, sig: 11 [#1]
  LE SMP NR_CPUS=2048 NUMA pSeries
  CPU: 70 PID: 48471 Comm: entrypoint.sh Kdump: loaded Not tainted 4.14.0-115.6.1.el7a.ppc64le #1
  task: c000000334a00000 task.stack: c000000331c00000
  NIP:  c0000000000a4000 LR: c00000000012f43c CTR: 0000000000000020
  REGS: c000000331c039c0 TRAP: 0300   Not tainted  (4.14.0-115.6.1.el7a.ppc64le)
  MSR:  800000010280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]>  CR: 44022840  XER: 20040000
  CFAR: c000000000008874 DAR: 0000000000000000 DSISR: 42000000 SOFTE: 1
  ...
  NIP [c0000000000a4000] memset+0x68/0x104
  LR [c00000000012f43c] mm_init+0x27c/0x2f0
  Call Trace:
    mm_init+0x260/0x2f0 (unreliable)
    copy_mm+0x11c/0x638
    copy_process.isra.28.part.29+0x6fc/0x1080
    _do_fork+0xdc/0x4c0
    ppc_clone+0x8/0xc
  Instruction dump:
  409e000c b0860000 38c60002 409d000c 90860000 38c60004 78a0d183 78a506a0
  7c0903a6 41820034 60000000 60420000 <f8860000> f8860008 f8860010 f8860018
Fixes fc5c2f4a55a2 ("powerpc/mm/hash64: Zero PGD pages on allocation")
Cc [email protected] # v4.16+
---
 arch/powerpc/include/asm/book3s/64/pgalloc.h |    3 +++
 1 file changed, 3 insertions(+)
arch/powerpc/include/asm/book3s/64/pgalloc.h +3 -0
@@ -81,6 +81,9 @@ static inline pgd_t *pgd_alloc(struct mm
 
 	pgd = kmem_cache_alloc(PGT_CACHE(PGD_INDEX_SIZE),
 			       pgtable_gfp_flags(mm, GFP_KERNEL));
+	if (unlikely(!pgd))
+		return pgd;
+
 	/*
 	 * Don't scan the PGD for pointers, it contains references to PUDs but
 	 * those references are not full pointers and so can't be recognised by
author maintainer
#37 lore raw

PATCH 37/46 drivers/virt/fsl_hypervisor.c: dereferencing error pointers in ioctl

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

commit c8ea3663f7a8e6996d44500ee818c9330ac4fd88 upstream.

strndup_user() returns error pointers on error, and then in the error handling we pass the error pointers to kfree(). It will cause an Oops.

Fixes 6db7199407ca ("drivers/virt: introduce Freescale hypervisor management driver")
Cc Timur Tabi <[email protected]>
Cc Mihai Caraman <[email protected]>
Cc Kumar Gala <[email protected]>
---
 drivers/virt/fsl_hypervisor.c |   26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)
drivers/virt/fsl_hypervisor.c +13 -13
@@ -331,8 +331,8 @@ static long ioctl_dtprop(struct fsl_hv_i
 	struct fsl_hv_ioctl_prop param;
 	char __user *upath, *upropname;
 	void __user *upropval;
-	char *path = NULL, *propname = NULL;
-	void *propval = NULL;
+	char *path, *propname;
+	void *propval;
 	int ret = 0;
 
 	/* Get the parameters from the user. */
@@ -344,32 +344,30 @@ static long ioctl_dtprop(struct fsl_hv_i
 	upropval = (void __user *)(uintptr_t)param.propval;
 
 	path = strndup_user(upath, FH_DTPROP_MAX_PATHLEN);
-	if (IS_ERR(path)) {
-		ret = PTR_ERR(path);
-		goto out;
-	}
+	if (IS_ERR(path))
+		return PTR_ERR(path);
 
 	propname = strndup_user(upropname, FH_DTPROP_MAX_PATHLEN);
 	if (IS_ERR(propname)) {
 		ret = PTR_ERR(propname);
-		goto out;
+		goto err_free_path;
 	}
 
 	if (param.proplen > FH_DTPROP_MAX_PROPLEN) {
 		ret = -EINVAL;
-		goto out;
+		goto err_free_propname;
 	}
 
 	propval = kmalloc(param.proplen, GFP_KERNEL);
 	if (!propval) {
 		ret = -ENOMEM;
-		goto out;
+		goto err_free_propname;
 	}
 
 	if (set) {
 		if (copy_from_user(propval, upropval, param.proplen)) {
 			ret = -EFAULT;
-			goto out;
+			goto err_free_propval;
 		}
 
 		param.ret = fh_partition_set_dtprop(param.handle,
@@ -388,7 +386,7 @@ static long ioctl_dtprop(struct fsl_hv_i
 			if (copy_to_user(upropval, propval, param.proplen) ||
 			    put_user(param.proplen, &p->proplen)) {
 				ret = -EFAULT;
-				goto out;
+				goto err_free_propval;
 			}
 		}
 	}
@@ -396,10 +394,12 @@ static long ioctl_dtprop(struct fsl_hv_i
 	if (put_user(param.ret, &p->ret))
 		ret = -EFAULT;
 
-out:
-	kfree(path);
+err_free_propval:
 	kfree(propval);
+err_free_propname:
 	kfree(propname);
+err_free_path:
+	kfree(path);
 
 	return ret;
 }
author maintainer
#46 lore raw

PATCH 46/46 f2fs: Fix use of number of devices

In reply to Greg Kroah-Hartman

From: Damien Le Moal <[email protected]>

commit 0916878da355650d7e77104a7ac0fa1784eca852 upstream.

For a single device mount using a zoned block device, the zone information for the device is stored in the sbi->devs single entry array and sbi->s_ndevs is set to 1. This differs from a single device mount using a regular block device which does not allocate sbi->devs and sets sbi->s_ndevs to 0.

However, sbi->s_devs == 0 condition is used throughout the code to differentiate a single device mount from a multi-device mount where sbi->s_ndevs is always larger than 1. This results in problems with single zoned block device volumes as these are treated as multi-device mounts but do not have the start_blk and end_blk information set. One of the problem observed is skipping of zone discard issuing resulting in write commands being issued to full zones or unaligned to a zone write pointer.

Fix this problem by simply treating the cases sbi->s_ndevs == 0 (single regular block device mount) and sbi->s_ndevs == 1 (single zoned block device mount) in the same manner. This is done by introducing the helper function f2fs_is_multi_device() and using this helper in place of direct tests of sbi->s_ndevs value, improving code readability.

Fixes 7bb3a371d199 ("f2fs: Fix zoned block device support")
---
 fs/f2fs/data.c    |   17 +++++++++++------
 fs/f2fs/f2fs.h    |   13 ++++++++++++-
 fs/f2fs/file.c    |    2 +-
 fs/f2fs/gc.c      |    2 +-
 fs/f2fs/segment.c |   13 +++++++------
 5 files changed, 32 insertions(+), 15 deletions(-)
fs/f2fs/data.c +11 -6
@@ -220,12 +220,14 @@ struct block_device *f2fs_target_device(
 	struct block_device *bdev = sbi->sb->s_bdev;
 	int i;
 
-	for (i = 0; i < sbi->s_ndevs; i++) {
-		if (FDEV(i).start_blk <= blk_addr &&
-					FDEV(i).end_blk >= blk_addr) {
-			blk_addr -= FDEV(i).start_blk;
-			bdev = FDEV(i).bdev;
-			break;
+	if (f2fs_is_multi_device(sbi)) {
+		for (i = 0; i < sbi->s_ndevs; i++) {
+			if (FDEV(i).start_blk <= blk_addr &&
+			    FDEV(i).end_blk >= blk_addr) {
+				blk_addr -= FDEV(i).start_blk;
+				bdev = FDEV(i).bdev;
+				break;
+			}
 		}
 	}
 	if (bio) {
@@ -239,6 +241,9 @@ int f2fs_target_device_index(struct f2fs
 {
 	int i;
 
+	if (!f2fs_is_multi_device(sbi))
+		return 0;
+
 	for (i = 0; i < sbi->s_ndevs; i++)
 		if (FDEV(i).start_blk <= blkaddr && FDEV(i).end_blk >= blkaddr)
 			return i;
fs/f2fs/f2fs.h +12 -1
@@ -1366,6 +1366,17 @@ static inline bool time_to_inject(struct
 }
 #endif
 
+/*
+ * Test if the mounted volume is a multi-device volume.
+ *   - For a single regular disk volume, sbi->s_ndevs is 0.
+ *   - For a single zoned disk volume, sbi->s_ndevs is 1.
+ *   - For a multi-device volume, sbi->s_ndevs is always 2 or more.
+ */
+static inline bool f2fs_is_multi_device(struct f2fs_sb_info *sbi)
+{
+	return sbi->s_ndevs > 1;
+}
+
 /* For write statistics. Suppose sector size is 512 bytes,
  * and the return value is in kbytes. s is of struct f2fs_sb_info.
  */
@@ -3615,7 +3626,7 @@ static inline bool f2fs_force_buffered_i
 
 	if (f2fs_post_read_required(inode))
 		return true;
-	if (sbi->s_ndevs)
+	if (f2fs_is_multi_device(sbi))
 		return true;
 	/*
 	 * for blkzoned device, fallback direct IO to buffered IO, so
fs/f2fs/file.c +1 -1
@@ -2573,7 +2573,7 @@ static int f2fs_ioc_flush_device(struct
 							sizeof(range)))
 		return -EFAULT;
 
-	if (sbi->s_ndevs <= 1 || sbi->s_ndevs - 1 <= range.dev_num ||
+	if (!f2fs_is_multi_device(sbi) || sbi->s_ndevs - 1 <= range.dev_num ||
 			__is_large_section(sbi)) {
 		f2fs_msg(sbi->sb, KERN_WARNING,
 			"Can't flush %u in %d for segs_per_sec %u != 1\n",
fs/f2fs/gc.c +1 -1
@@ -1346,7 +1346,7 @@ void f2fs_build_gc_manager(struct f2fs_s
 	sbi->gc_pin_file_threshold = DEF_GC_FAILED_PINNED_FILES;
 
 	/* give warm/cold data area from slower device */
-	if (sbi->s_ndevs && !__is_large_section(sbi))
+	if (f2fs_is_multi_device(sbi) && !__is_large_section(sbi))
 		SIT_I(sbi)->last_victim[ALLOC_NEXT] =
 				GET_SEGNO(sbi, FDEV(0).end_blk) + 1;
 }
fs/f2fs/segment.c +7 -6
@@ -580,7 +580,7 @@ static int submit_flush_wait(struct f2fs
 	int ret = 0;
 	int i;
 
-	if (!sbi->s_ndevs)
+	if (!f2fs_is_multi_device(sbi))
 		return __submit_flush_wait(sbi, sbi->sb->s_bdev);
 
 	for (i = 0; i < sbi->s_ndevs; i++) {
@@ -648,7 +648,8 @@ int f2fs_issue_flush(struct f2fs_sb_info
 		return ret;
 	}
 
-	if (atomic_inc_return(&fcc->queued_flush) == 1 || sbi->s_ndevs > 1) {
+	if (atomic_inc_return(&fcc->queued_flush) == 1 ||
+	    f2fs_is_multi_device(sbi)) {
 		ret = submit_flush_wait(sbi, ino);
 		atomic_dec(&fcc->queued_flush);
 
@@ -754,7 +755,7 @@ int f2fs_flush_device_cache(struct f2fs_
 {
 	int ret = 0, i;
 
-	if (!sbi->s_ndevs)
+	if (!f2fs_is_multi_device(sbi))
 		return 0;
 
 	for (i = 1; i < sbi->s_ndevs; i++) {
@@ -1369,7 +1370,7 @@ static int __queue_discard_cmd(struct f2
 
 	trace_f2fs_queue_discard(bdev, blkstart, blklen);
 
-	if (sbi->s_ndevs) {
+	if (f2fs_is_multi_device(sbi)) {
 		int devi = f2fs_target_device_index(sbi, blkstart);
 
 		blkstart -= FDEV(devi).start_blk;
@@ -1732,7 +1733,7 @@ static int __f2fs_issue_discard_zone(str
 	block_t lblkstart = blkstart;
 	int devi = 0;
 
-	if (sbi->s_ndevs) {
+	if (f2fs_is_multi_device(sbi)) {
 		devi = f2fs_target_device_index(sbi, blkstart);
 		blkstart -= FDEV(devi).start_blk;
 	}
@@ -3089,7 +3090,7 @@ static void update_device_state(struct f
 	struct f2fs_sb_info *sbi = fio->sbi;
 	unsigned int devidx;
 
-	if (!sbi->s_ndevs)
+	if (!f2fs_is_multi_device(sbi))
 		return;
 
 	devidx = f2fs_target_device_index(sbi, fio->new_blkaddr);
author maintainer
#8 lore raw

PATCH 8/46 kernfs: fix barrier usage in __kernfs_new_node()

In reply to Greg Kroah-Hartman

From: Andrea Parri <[email protected]>

commit 998267900cee901c5d1dfa029a6304d00acbc29f upstream.

smp_mb__before_atomic() can not be applied to atomic_set(). Remove the barrier and rely on RELEASE synchronization.

Fixes ba16b2846a8c6 ("kernfs: add an API to get kernfs node from inode number")
---
 fs/kernfs/dir.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
fs/kernfs/dir.c +2 -3
@@ -650,11 +650,10 @@ static struct kernfs_node *__kernfs_new_
 	kn->id.generation = gen;
 
 	/*
-	 * set ino first. This barrier is paired with atomic_inc_not_zero in
+	 * set ino first. This RELEASE is paired with atomic_inc_not_zero in
 	 * kernfs_find_and_get_node_by_ino
 	 */
-	smp_mb__before_atomic();
-	atomic_set(&kn->count, 1);
+	atomic_set_release(&kn->count, 1);
 	atomic_set(&kn->active, KN_DEACTIVATED_BIAS);
 	RB_CLEAR_NODE(&kn->rb);
 
author maintainer
#6 lore raw

PATCH 6/46 selftests/seccomp: Handle namespace failures gracefully

In reply to Greg Kroah-Hartman

From: Kees Cook <[email protected]>

commit 9dd3fcb0ab73cb1e00b8562ef027a38521aaff87 upstream.

When running without USERNS or PIDNS the seccomp test would hang since it was waiting forever for the child to trigger the user notification since it seems the glibc() abort handler makes a call to getpid(), which would trap again. This changes the getpid filter to getppid, and makes sure ASSERTs execute to stop from spawning the listener.

Fixes 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
---
 tools/testing/selftests/seccomp/seccomp_bpf.c |   43 +++++++++++++-------------
 1 file changed, 23 insertions(+), 20 deletions(-)
tools/testing/selftests/seccomp/seccomp_bpf.c +23 -20
@@ -3095,9 +3095,9 @@ TEST(user_notification_basic)
 
 	/* Check that we get -ENOSYS with no listener attached */
 	if (pid == 0) {
-		if (user_trap_syscall(__NR_getpid, 0) < 0)
+		if (user_trap_syscall(__NR_getppid, 0) < 0)
 			exit(1);
-		ret = syscall(__NR_getpid);
+		ret = syscall(__NR_getppid);
 		exit(ret >= 0 || errno != ENOSYS);
 	}
 
@@ -3112,12 +3112,12 @@ TEST(user_notification_basic)
 	EXPECT_EQ(seccomp(SECCOMP_SET_MODE_FILTER, 0, &prog), 0);
 
 	/* Check that the basic notification machinery works */
-	listener = user_trap_syscall(__NR_getpid,
+	listener = user_trap_syscall(__NR_getppid,
 				     SECCOMP_FILTER_FLAG_NEW_LISTENER);
 	ASSERT_GE(listener, 0);
 
 	/* Installing a second listener in the chain should EBUSY */
-	EXPECT_EQ(user_trap_syscall(__NR_getpid,
+	EXPECT_EQ(user_trap_syscall(__NR_getppid,
 				    SECCOMP_FILTER_FLAG_NEW_LISTENER),
 		  -1);
 	EXPECT_EQ(errno, EBUSY);
@@ -3126,7 +3126,7 @@ TEST(user_notification_basic)
 	ASSERT_GE(pid, 0);
 
 	if (pid == 0) {
-		ret = syscall(__NR_getpid);
+		ret = syscall(__NR_getppid);
 		exit(ret != USER_NOTIF_MAGIC);
 	}
 
@@ -3144,7 +3144,7 @@ TEST(user_notification_basic)
 	EXPECT_GT(poll(&pollfd, 1, -1), 0);
 	EXPECT_EQ(pollfd.revents, POLLOUT);
 
-	EXPECT_EQ(req.data.nr,  __NR_getpid);
+	EXPECT_EQ(req.data.nr,  __NR_getppid);
 
 	resp.id = req.id;
 	resp.error = 0;
@@ -3176,7 +3176,7 @@ TEST(user_notification_kill_in_middle)
 		TH_LOG("Kernel does not support PR_SET_NO_NEW_PRIVS!");
 	}
 
-	listener = user_trap_syscall(__NR_getpid,
+	listener = user_trap_syscall(__NR_getppid,
 				     SECCOMP_FILTER_FLAG_NEW_LISTENER);
 	ASSERT_GE(listener, 0);
 
@@ -3188,7 +3188,7 @@ TEST(user_notification_kill_in_middle)
 	ASSERT_GE(pid, 0);
 
 	if (pid == 0) {
-		ret = syscall(__NR_getpid);
+		ret = syscall(__NR_getppid);
 		exit(ret != USER_NOTIF_MAGIC);
 	}
 
@@ -3298,7 +3298,7 @@ TEST(user_notification_closed_listener)
 		TH_LOG("Kernel does not support PR_SET_NO_NEW_PRIVS!");
 	}
 
-	listener = user_trap_syscall(__NR_getpid,
+	listener = user_trap_syscall(__NR_getppid,
 				     SECCOMP_FILTER_FLAG_NEW_LISTENER);
 	ASSERT_GE(listener, 0);
 
@@ -3309,7 +3309,7 @@ TEST(user_notification_closed_listener)
 	ASSERT_GE(pid, 0);
 	if (pid == 0) {
 		close(listener);
-		ret = syscall(__NR_getpid);
+		ret = syscall(__NR_getppid);
 		exit(ret != -1 && errno != ENOSYS);
 	}
 
@@ -3332,14 +3332,15 @@ TEST(user_notification_child_pid_ns)
 
 	ASSERT_EQ(unshare(CLONE_NEWUSER | CLONE_NEWPID), 0);
 
-	listener = user_trap_syscall(__NR_getpid, SECCOMP_FILTER_FLAG_NEW_LISTENER);
+	listener = user_trap_syscall(__NR_getppid,
+				     SECCOMP_FILTER_FLAG_NEW_LISTENER);
 	ASSERT_GE(listener, 0);
 
 	pid = fork();
 	ASSERT_GE(pid, 0);
 
 	if (pid == 0)
-		exit(syscall(__NR_getpid) != USER_NOTIF_MAGIC);
+		exit(syscall(__NR_getppid) != USER_NOTIF_MAGIC);
 
 	EXPECT_EQ(ioctl(listener, SECCOMP_IOCTL_NOTIF_RECV, &req), 0);
 	EXPECT_EQ(req.pid, pid);
@@ -3371,7 +3372,8 @@ TEST(user_notification_sibling_pid_ns)
 		TH_LOG("Kernel does not support PR_SET_NO_NEW_PRIVS!");
 	}
 
-	listener = user_trap_syscall(__NR_getpid, SECCOMP_FILTER_FLAG_NEW_LISTENER);
+	listener = user_trap_syscall(__NR_getppid,
+				     SECCOMP_FILTER_FLAG_NEW_LISTENER);
 	ASSERT_GE(listener, 0);
 
 	pid = fork();
@@ -3384,7 +3386,7 @@ TEST(user_notification_sibling_pid_ns)
 		ASSERT_GE(pid2, 0);
 
 		if (pid2 == 0)
-			exit(syscall(__NR_getpid) != USER_NOTIF_MAGIC);
+			exit(syscall(__NR_getppid) != USER_NOTIF_MAGIC);
 
 		EXPECT_EQ(waitpid(pid2, &status, 0), pid2);
 		EXPECT_EQ(true, WIFEXITED(status));
@@ -3393,11 +3395,11 @@ TEST(user_notification_sibling_pid_ns)
 	}
 
 	/* Create the sibling ns, and sibling in it. */
-	EXPECT_EQ(unshare(CLONE_NEWPID), 0);
-	EXPECT_EQ(errno, 0);
+	ASSERT_EQ(unshare(CLONE_NEWPID), 0);
+	ASSERT_EQ(errno, 0);
 
 	pid2 = fork();
-	EXPECT_GE(pid2, 0);
+	ASSERT_GE(pid2, 0);
 
 	if (pid2 == 0) {
 		ASSERT_EQ(ioctl(listener, SECCOMP_IOCTL_NOTIF_RECV, &req), 0);
@@ -3405,7 +3407,7 @@ TEST(user_notification_sibling_pid_ns)
 		 * The pid should be 0, i.e. the task is in some namespace that
 		 * we can't "see".
 		 */
-		ASSERT_EQ(req.pid, 0);
+		EXPECT_EQ(req.pid, 0);
 
 		resp.id = req.id;
 		resp.error = 0;
@@ -3435,14 +3437,15 @@ TEST(user_notification_fault_recv)
 
 	ASSERT_EQ(unshare(CLONE_NEWUSER), 0);
 
-	listener = user_trap_syscall(__NR_getpid, SECCOMP_FILTER_FLAG_NEW_LISTENER);
+	listener = user_trap_syscall(__NR_getppid,
+				     SECCOMP_FILTER_FLAG_NEW_LISTENER);
 	ASSERT_GE(listener, 0);
 
 	pid = fork();
 	ASSERT_GE(pid, 0);
 
 	if (pid == 0)
-		exit(syscall(__NR_getpid) != USER_NOTIF_MAGIC);
+		exit(syscall(__NR_getppid) != USER_NOTIF_MAGIC);
 
 	/* Do a bad recv() */
 	EXPECT_EQ(ioctl(listener, SECCOMP_IOCTL_NOTIF_RECV, NULL), -1);
author maintainer
#31 lore raw

PATCH 31/46 aqc111: fix double endianness swap on BE

In reply to Greg Kroah-Hartman

From: Oliver Neukum <[email protected]>

[ Upstream commit 2cf672709beb005f6e90cb4edbed6f2218ba953e ]

If you are using a function that does a swap in place, you cannot just reuse the buffer on the assumption that it has not been changed.

---
 drivers/net/usb/aqc111.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/net/usb/aqc111.c +4 -2
@@ -1428,7 +1428,7 @@ static int aqc111_resume(struct usb_inte
 {
 	struct usbnet *dev = usb_get_intfdata(intf);
 	struct aqc111_data *aqc111_data = dev->driver_priv;
-	u16 reg16;
+	u16 reg16, oldreg16;
 	u8 reg8;
 
 	netif_carrier_off(dev->net);
@@ -1444,9 +1444,11 @@ static int aqc111_resume(struct usb_inte
 	/* Configure RX control register => start operation */
 	reg16 = aqc111_data->rxctl;
 	reg16 &= ~SFR_RX_CTL_START;
+	/* needs to be saved in case endianness is swapped */
+	oldreg16 = reg16;
 	aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_RX_CTL, 2, &reg16);
 
-	reg16 |= SFR_RX_CTL_START;
+	reg16 = oldreg16 | SFR_RX_CTL_START;
 	aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_RX_CTL, 2, &reg16);
 
 	aqc111_set_phy_speed(dev, aqc111_data->autoneg,
author maintainer
#27 lore raw

PATCH 27/46 vlan: disable SIOCSHWTSTAMP in container

In reply to Greg Kroah-Hartman

From: Hangbin Liu <[email protected]>

[ Upstream commit 873017af778439f2f8e3d87f28ddb1fcaf244a76 ]

With NET_ADMIN enabled in container, a normal user could be mapped to root and is able to change the real device's rx filter via ioctl on vlan, which would affect the other ptp process on host. Fix it by disabling SIOCSHWTSTAMP in container.

Fixes a6111d3c93d0 ("vlan: Pass SIOC[SG]HWTSTAMP ioctls to real device")
---
 net/8021q/vlan_dev.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
net/8021q/vlan_dev.c +3 -1
@@ -367,10 +367,12 @@ static int vlan_dev_ioctl(struct net_dev
 	ifrr.ifr_ifru = ifr->ifr_ifru;
 
 	switch (cmd) {
+	case SIOCSHWTSTAMP:
+		if (!net_eq(dev_net(dev), &init_net))
+			break;
 	case SIOCGMIIPHY:
 	case SIOCGMIIREG:
 	case SIOCSMIIREG:
-	case SIOCSHWTSTAMP:
 	case SIOCGHWTSTAMP:
 		if (netif_device_present(real_dev) && ops->ndo_do_ioctl)
 			err = ops->ndo_do_ioctl(real_dev, &ifrr, cmd);
author maintainer
#30 lore raw

PATCH 30/46 aqc111: fix writing to the phy on BE

In reply to Greg Kroah-Hartman

From: Oliver Neukum <[email protected]>

[ Upstream commit 369b46e9fbcfa5136f2cb5f486c90e5f7fa92630 ]

When writing to the phy on BE architectures an internal data structure was directly given, leading to it being byte swapped in the wrong way for the CPU in 50% of all cases. A temporary buffer must be used.

---
 drivers/net/usb/aqc111.c |   23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)
drivers/net/usb/aqc111.c +17 -6
@@ -320,6 +320,7 @@ static int aqc111_get_link_ksettings(str
 static void aqc111_set_phy_speed(struct usbnet *dev, u8 autoneg, u16 speed)
 {
 	struct aqc111_data *aqc111_data = dev->driver_priv;
+	u32 phy_on_the_wire;
 
 	aqc111_data->phy_cfg &= ~AQ_ADV_MASK;
 	aqc111_data->phy_cfg |= AQ_PAUSE;
@@ -361,7 +362,8 @@ static void aqc111_set_phy_speed(struct
 		}
 	}
 
-	aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0, &aqc111_data->phy_cfg);
+	phy_on_the_wire = aqc111_data->phy_cfg;
+	aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0, &phy_on_the_wire);
 }
 
 static int aqc111_set_link_ksettings(struct net_device *net,
@@ -755,6 +757,7 @@ static void aqc111_unbind(struct usbnet
 {
 	struct aqc111_data *aqc111_data = dev->driver_priv;
 	u16 reg16;
+	u32 phy_on_the_wire;
 
 	/* Force bz */
 	reg16 = SFR_PHYPWR_RSTCTL_BZ;
@@ -768,8 +771,9 @@ static void aqc111_unbind(struct usbnet
 	aqc111_data->phy_cfg &= ~AQ_ADV_MASK;
 	aqc111_data->phy_cfg |= AQ_LOW_POWER;
 	aqc111_data->phy_cfg &= ~AQ_PHY_POWER_EN;
+	phy_on_the_wire = aqc111_data->phy_cfg;
 	aqc111_write32_cmd_nopm(dev, AQ_PHY_OPS, 0, 0,
-				&aqc111_data->phy_cfg);
+				&phy_on_the_wire);
 
 	kfree(aqc111_data);
 }
@@ -992,6 +996,7 @@ static int aqc111_reset(struct usbnet *d
 {
 	struct aqc111_data *aqc111_data = dev->driver_priv;
 	u8 reg8 = 0;
+	u32 phy_on_the_wire;
 
 	dev->rx_urb_size = URB_SIZE;
 
@@ -1004,8 +1009,9 @@ static int aqc111_reset(struct usbnet *d
 
 	/* Power up ethernet PHY */
 	aqc111_data->phy_cfg = AQ_PHY_POWER_EN;
+	phy_on_the_wire = aqc111_data->phy_cfg;
 	aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0,
-			   &aqc111_data->phy_cfg);
+			   &phy_on_the_wire);
 
 	/* Set the MAC address */
 	aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_NODE_ID, ETH_ALEN,
@@ -1036,6 +1042,7 @@ static int aqc111_stop(struct usbnet *de
 {
 	struct aqc111_data *aqc111_data = dev->driver_priv;
 	u16 reg16 = 0;
+	u32 phy_on_the_wire;
 
 	aqc111_read16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE,
 			  2, &reg16);
@@ -1047,8 +1054,9 @@ static int aqc111_stop(struct usbnet *de
 
 	/* Put PHY to low power*/
 	aqc111_data->phy_cfg |= AQ_LOW_POWER;
+	phy_on_the_wire = aqc111_data->phy_cfg;
 	aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0,
-			   &aqc111_data->phy_cfg);
+			   &phy_on_the_wire);
 
 	netif_carrier_off(dev->net);
 
@@ -1324,6 +1332,7 @@ static int aqc111_suspend(struct usb_int
 	u16 temp_rx_ctrl = 0x00;
 	u16 reg16;
 	u8 reg8;
+	u32 phy_on_the_wire;
 
 	usbnet_suspend(intf, message);
 
@@ -1395,12 +1404,14 @@ static int aqc111_suspend(struct usb_int
 
 		aqc111_write_cmd(dev, AQ_WOL_CFG, 0, 0,
 				 WOL_CFG_SIZE, &wol_cfg);
+		phy_on_the_wire = aqc111_data->phy_cfg;
 		aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0,
-				   &aqc111_data->phy_cfg);
+				   &phy_on_the_wire);
 	} else {
 		aqc111_data->phy_cfg |= AQ_LOW_POWER;
+		phy_on_the_wire = aqc111_data->phy_cfg;
 		aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0,
-				   &aqc111_data->phy_cfg);
+				   &phy_on_the_wire);
 
 		/* Disable RX path */
 		aqc111_read16_cmd_nopm(dev, AQ_ACCESS_MAC,
author maintainer
#29 lore raw

PATCH 29/46 aqc111: fix endianness issue in aqc111_change_mtu

In reply to Greg Kroah-Hartman

From: Oliver Neukum <[email protected]>

[ Upstream commit b8b277525e9df2fd2dc3d1f4fe01c6796bb107fc ]

If the MTU is large enough, the first write to the device is just repeated. On BE architectures, however, the first word of the command will be swapped a second time and garbage will be written. Avoid that.

---
 drivers/net/usb/aqc111.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/net/usb/aqc111.c +2 -0
@@ -453,6 +453,8 @@ static int aqc111_change_mtu(struct net_
 		reg16 = 0x1420;
 	else if (dev->net->mtu <= 16334)
 		reg16 = 0x1A20;
+	else
+		return 0;
 
 	aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_PAUSE_WATERLVL_LOW,
 			   2, &reg16);
author maintainer
#19 lore raw

PATCH 19/46 net: dsa: Fix error cleanup path in dsa_init_module

In reply to Greg Kroah-Hartman

From: YueHaibing <[email protected]>

[ Upstream commit 68be930249d051fd54d3d99156b3dcadcb2a1f9b ]

BUG: unable to handle kernel paging request at ffffffffa01c5430
PGD 3270067 P4D 3270067 PUD 3271063 PMD 230bc5067 PTE 0
Oops: 0000 [#1
CPU: 0 PID: 6159 Comm: modprobe Not tainted 5.1.0+ #33
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:raw_notifier_chain_register+0x16/0x40
Code: 63 f8 66 90 e9 5d ff ff ff 90 90 90 90 90 90 90 90 90 90 90 55 48 8b 07 48 89 e5 48 85 c0 74 1c 8b 56 10 3b 50 10 7e 07 eb 12 <39> 50 10 7c 0d 48 8d 78 08 48 8b 40 08 48 85 c0 75 ee 48 89 46 08
RSP: 0018:ffffc90001c33c08 EFLAGS: 00010282
RAX: ffffffffa01c5420 RBX: ffffffffa01db420 RCX: 4fcef45928070a8b
RDX: 0000000000000000 RSI: ffffffffa01db420 RDI: ffffffffa01b0068
RBP: ffffc90001c33c08 R08: 000000003e0a33d0 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000094443661 R12: ffff88822c320700
R13: ffff88823109be80 R14: 0000000000000000 R15: ffffc90001c33e78
FS:  00007fab8bd08540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa01c5430 CR3: 00000002297ea000 CR4: 00000000000006f0
Call Trace:
 register_netdevice_notifier+0x43/0x250
 ? 0xffffffffa01e0000
 dsa_slave_register_notifier+0x13/0x70 [dsa_core
 ? 0xffffffffa01e0000
 dsa_init_module+0x2e/0x1000 [dsa_core
 do_one_initcall+0x6c/0x3cc
 ? do_init_module+0x22/0x1f1
 ? rcu_read_lock_sched_held+0x97/0xb0
 ? kmem_cache_alloc_trace+0x325/0x3b0
 do_init_module+0x5b/0x1f1
 load_module+0x1db1/0x2690
 ? m_show+0x1d0/0x1d0
 __do_sys_finit_module+0xc5/0xd0
 __x64_sys_finit_module+0x15/0x20
 do_syscall_64+0x6b/0x1d0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Cleanup allocated resourses if there are errors,
otherwise it will trgger memleak.

Fixes c9eb3e0f8701 ("net: dsa: Add support for learning FDB through notification")
---
 net/dsa/dsa.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
net/dsa/dsa.c +9 -2
@@ -344,15 +344,22 @@ static int __init dsa_init_module(void)
 
 	rc = dsa_slave_register_notifier();
 	if (rc)
-		return rc;
+		goto register_notifier_fail;
 
 	rc = dsa_legacy_register();
 	if (rc)
-		return rc;
+		goto legacy_register_fail;
 
 	dev_add_pack(&dsa_pack_type);
 
 	return 0;
+
+legacy_register_fail:
+	dsa_slave_unregister_notifier();
+register_notifier_fail:
+	destroy_workqueue(dsa_owq);
+
+	return rc;
 }
 module_init(dsa_init_module);
 
author maintainer
#20 lore raw

PATCH 20/46 net: ethernet: stmmac: dwmac-sun8i: enable support of unicast filtering

In reply to Greg Kroah-Hartman

From: Corentin Labbe <[email protected]>

[ Upstream commit d4c26eb6e721683a0f93e346ce55bc8dc3cbb175 ]

When adding more MAC addresses to a dwmac-sun8i interface, the device goes directly in promiscuous mode.
This is due to IFF_UNICAST_FLT missing flag.

So since the hardware support unicast filtering, let's add IFF_UNICAST_FLT.

Fixes 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i")
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c +2 -0
@@ -1015,6 +1015,8 @@ static struct mac_device_info *sun8i_dwm
 	mac->mac = &sun8i_dwmac_ops;
 	mac->dma = &sun8i_dwmac_dma_ops;
 
+	priv->dev->priv_flags |= IFF_UNICAST_FLT;
+
 	/* The loopback bit seems to be re-set when link change
 	 * Simply mask it each time
 	 * Speed 10/100/1000 are set in BIT(2)/BIT(3)
author maintainer
#2 lore raw

PATCH 2/46 platform/x86: thinkpad_acpi: Disable Bluetooth for some machines

In reply to Greg Kroah-Hartman

From: Jiaxun Yang <[email protected]>

commit f7db839fccf087664e5587966220821289b6a9cb upstream.

Some AMD based ThinkPads have a firmware bug that calling "GBDC" will cause Bluetooth on Intel wireless cards blocked.

Probe these models by DMI match and disable Bluetooth subdriver if specified Intel wireless card exist.

---
 drivers/platform/x86/thinkpad_acpi.c |   72 ++++++++++++++++++++++++++++++++++-
 1 file changed, 70 insertions(+), 2 deletions(-)
drivers/platform/x86/thinkpad_acpi.c +70 -2
@@ -79,7 +79,7 @@
 #include <linux/jiffies.h>
 #include <linux/workqueue.h>
 #include <linux/acpi.h>
-#include <linux/pci_ids.h>
+#include <linux/pci.h>
 #include <linux/power_supply.h>
 #include <sound/core.h>
 #include <sound/control.h>
@@ -4501,6 +4501,74 @@ static void bluetooth_exit(void)
 	bluetooth_shutdown();
 }
 
+static const struct dmi_system_id bt_fwbug_list[] __initconst = {
+	{
+		.ident = "ThinkPad E485",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_BOARD_NAME, "20KU"),
+		},
+	},
+	{
+		.ident = "ThinkPad E585",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_BOARD_NAME, "20KV"),
+		},
+	},
+	{
+		.ident = "ThinkPad A285 - 20MW",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_BOARD_NAME, "20MW"),
+		},
+	},
+	{
+		.ident = "ThinkPad A285 - 20MX",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_BOARD_NAME, "20MX"),
+		},
+	},
+	{
+		.ident = "ThinkPad A485 - 20MU",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_BOARD_NAME, "20MU"),
+		},
+	},
+	{
+		.ident = "ThinkPad A485 - 20MV",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_BOARD_NAME, "20MV"),
+		},
+	},
+	{}
+};
+
+static const struct pci_device_id fwbug_cards_ids[] __initconst = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x24F3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x24FD) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2526) },
+	{}
+};
+
+
+static int __init have_bt_fwbug(void)
+{
+	/*
+	 * Some AMD based ThinkPads have a firmware bug that calling
+	 * "GBDC" will cause bluetooth on Intel wireless cards blocked
+	 */
+	if (dmi_check_system(bt_fwbug_list) && pci_dev_present(fwbug_cards_ids)) {
+		vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_RFKILL,
+			FW_BUG "disable bluetooth subdriver for Intel cards\n");
+		return 1;
+	} else
+		return 0;
+}
+
 static int __init bluetooth_init(struct ibm_init_struct *iibm)
 {
 	int res;
@@ -4513,7 +4581,7 @@ static int __init bluetooth_init(struct
 
 	/* bluetooth not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
 	   G4x, R30, R31, R40e, R50e, T20-22, X20-21 */
-	tp_features.bluetooth = hkey_handle &&
+	tp_features.bluetooth = !have_bt_fwbug() && hkey_handle &&
 	    acpi_evalf(hkey_handle, &status, "GBDC", "qd");
 
 	vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_RFKILL,
author maintainer
#17 lore raw

PATCH 17/46 fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied

In reply to Greg Kroah-Hartman

From: Hangbin Liu <[email protected]>

[ Upstream commit e9919a24d3022f72bcadc407e73a6ef17093a849 ]

With commit 153380ec4b9 ("fib_rules: Added NLM_F_EXCL support to fib_nl_newrule") we now able to check if a rule already exists. But this only works with iproute2. For other tools like libnl, NetworkManager, it still could add duplicate rules with only NLM_F_CREATE flag, like

[localhost ~ ]# ip rule

0:      from all lookup local
32766:  from all lookup main
32767:  from all lookup default

100000: from 192.168.7.5 lookup 5
100000: from 192.168.7.5 lookup 5

As it doesn't make sense to create two duplicate rules, let's just return 0 if the rule exists.

Fixes 153380ec4b9 ("fib_rules: Added NLM_F_EXCL support to fib_nl_newrule")
---
 net/core/fib_rules.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
net/core/fib_rules.c +3 -3
@@ -756,9 +756,9 @@ int fib_nl_newrule(struct sk_buff *skb,
 	if (err)
 		goto errout;
 
-	if ((nlh->nlmsg_flags & NLM_F_EXCL) &&
-	    rule_exists(ops, frh, tb, rule)) {
-		err = -EEXIST;
+	if (rule_exists(ops, frh, tb, rule)) {
+		if (nlh->nlmsg_flags & NLM_F_EXCL)
+			err = -EEXIST;
 		goto errout_free;
 	}
 
author maintainer
#13 lore raw

PATCH 13/46 Dont jump to compute_result state from check_result state

In reply to Greg Kroah-Hartman

From: Nigel Croxon <[email protected]>

commit 4f4fd7c5798bbdd5a03a60f6269cf1177fbd11ef upstream.

Changing state from check_state_check_result to check_state_compute_result not only is unsafe but also doesn't appear to serve a valid purpose. A raid6 check should only be pushing out extra writes if doing repair and a mis-match occurs. The stripe dev management will already try and do repair writes for failing sectors.

This patch makes the raid6 check_state_check_result handling work more like raid5's. If somehow too many failures for a check, just quit the check operation for the stripe. When any checks pass, don't try and use check_state_compute_result for a purpose it isn't needed for and is unsafe for. Just mark the stripe as in sync for passing its parity checks and let the stripe dev read/write code and the bad blocks list do their job handling I/O errors.

Repro steps from Xiao:

These are the steps to reproduce this problem:
1. redefined OPT_MEDIUM_ERR_ADDR to 12000 in scsi_debug.c
2. insmod scsi_debug.ko dev_size_mb=11000 max_luns=1 num_tgts=1
3. mdadm --create /dev/md127 --level=6 --raid-devices=5 /dev/sde1 /dev/sde2 /dev/sde3 /dev/sde5 /dev/sde6 sde is the disk created by scsi_debug
4. echo "2" >/sys/module/scsi_debug/parameters/opts
5. raid-check

It panic:

[ 4854.730899] md: data-check of RAID array md127
[ 4854.857455] sd 5:0:0:0: [sdr] tag#80 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4854.859246] sd 5:0:0:0: [sdr] tag#80 Sense Key : Medium Error [current]
[ 4854.860694] sd 5:0:0:0: [sdr] tag#80 Add. Sense: Unrecovered read error
[ 4854.862207] sd 5:0:0:0: [sdr] tag#80 CDB: Read(10) 28 00 00 00 2d 88 00 04 00 00
[ 4854.864196] print_req_error: critical medium error, dev sdr, sector 11656 flags 0
[ 4854.867409] sd 5:0:0:0: [sdr] tag#100 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4854.869469] sd 5:0:0:0: [sdr] tag#100 Sense Key : Medium Error [current]
[ 4854.871206] sd 5:0:0:0: [sdr] tag#100 Add. Sense: Unrecovered read error
[ 4854.872858] sd 5:0:0:0: [sdr] tag#100 CDB: Read(10) 28 00 00 00 2e e0 00 00 08 00
[ 4854.874587] print_req_error: critical medium error, dev sdr, sector 12000 flags 4000
[ 4854.876456] sd 5:0:0:0: [sdr] tag#101 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4854.878552] sd 5:0:0:0: [sdr] tag#101 Sense Key : Medium Error [current]
[ 4854.880278] sd 5:0:0:0: [sdr] tag#101 Add. Sense: Unrecovered read error
[ 4854.881846] sd 5:0:0:0: [sdr] tag#101 CDB: Read(10) 28 00 00 00 2e e8 00 00 08 00
[ 4854.883691] print_req_error: critical medium error, dev sdr, sector 12008 flags 4000
[ 4854.893927] sd 5:0:0:0: [sdr] tag#166 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4854.896002] sd 5:0:0:0: [sdr] tag#166 Sense Key : Medium Error [current]
[ 4854.897561] sd 5:0:0:0: [sdr] tag#166 Add. Sense: Unrecovered read error
[ 4854.899110] sd 5:0:0:0: [sdr] tag#166 CDB: Read(10) 28 00 00 00 2e e0 00 00 10 00
[ 4854.900989] print_req_error: critical medium error, dev sdr, sector 12000 flags 0
[ 4854.902757] md/raid:md127: read error NOT corrected!! (sector 9952 on sdr1).
[ 4854.904375] md/raid:md127: read error NOT corrected!! (sector 9960 on sdr1).
[ 4854.906201] ------------[ cut here ]------------
[ 4854.907341] kernel BUG at drivers/md/raid5.c:4190!

raid5.c:4190 above is this BUG_ON:

    handle_parity_checks6()
        ...
        BUG_ON(s->uptodate < disks - 1); /* We don't need Q to recover */

Cc: <[email protected]> # v3.16+
OriginalAuthor: David Jeffery <[email protected]>

---
 drivers/md/raid5.c |   19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)
drivers/md/raid5.c +4 -15
@@ -4223,26 +4223,15 @@ static void handle_parity_checks6(struct
 	case check_state_check_result:
 		sh->check_state = check_state_idle;
 
+		if (s->failed > 1)
+			break;
 		/* handle a successful check operation, if parity is correct
 		 * we are done.  Otherwise update the mismatch count and repair
 		 * parity if !MD_RECOVERY_CHECK
 		 */
 		if (sh->ops.zero_sum_result == 0) {
-			/* both parities are correct */
-			if (!s->failed)
-				set_bit(STRIPE_INSYNC, &sh->state);
-			else {
-				/* in contrast to the raid5 case we can validate
-				 * parity, but still have a failure to write
-				 * back
-				 */
-				sh->check_state = check_state_compute_result;
-				/* Returning at this point means that we may go
-				 * off and bring p and/or q uptodate again so
-				 * we make sure to check zero_sum_result again
-				 * to verify if p or q need writeback
-				 */
-			}
+			/* Any parity checked was correct */
+			set_bit(STRIPE_INSYNC, &sh->state);
 		} else {
 			atomic64_add(STRIPE_SECTORS, &conf->mddev->resync_mismatches);
 			if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery)) {
author maintainer
#12 lore raw

PATCH 12/46 rtlwifi: rtl8723ae: Fix missing break in switch statement

In reply to Greg Kroah-Hartman

From: Gustavo A. R. Silva <[email protected]>

commit 84242b82d81c54e009a2aaa74d3d9eff70babf56 upstream.

Add missing break statement in order to prevent the code from falling through to case 0x1025, and erroneously setting rtlhal->oem_id to RT_CID_819X_ACER when rtlefuse->eeprom_svid is equal to 0x10EC and none of the cases in switch (rtlefuse->eeprom_smid) match.

This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough.

Fixes 238ad2ddf34b ("rtlwifi: rtl8723ae: Clean up the hardware info routine")
---
 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c |    1 +
 1 file changed, 1 insertion(+)
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c +1 -0
@@ -1675,6 +1675,7 @@ static void _rtl8723e_read_adapter_info(
 					rtlhal->oem_id = RT_CID_819X_LENOVO;
 					break;
 				}
+				break;
 			case 0x1025:
 				rtlhal->oem_id = RT_CID_819X_ACER;
 				break;
#47 lore raw
In reply to Greg Kroah-Hartman
Quoted 4 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.1.3 release. There are 46 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

...

Quoted 8 lines

Oliver Neukum <[email protected]>
aqc111: fix double endianness swap on BE

Oliver Neukum <[email protected]>
aqc111: fix writing to the phy on BE

Oliver Neukum <[email protected]>
aqc111: fix endianness issue in aqc111_change_mtu

Hello Greg,

Could you please drop these three patches from the queue? They are invalid and will be reverted in net tree.

https://lore.kernel.org/netdev/[email protected]/

Thanks,
Igor

#49 lore raw
In reply to Greg Kroah-Hartman
Quoted 7 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.1.3 release. There are 46 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Quoted 9 lines

Oliver Neukum <[email protected]>
aqc111: fix double endianness swap on BE

Oliver Neukum <[email protected]>
aqc111: fix writing to the phy on BE

Oliver Neukum <[email protected]>
aqc111: fix endianness issue in aqc111_change_mtu

Hello Greg,

Same request for 5.1 tree.
Please drop these three patches from the queue, they are invalid and will be reverted in net tree.

https://lore.kernel.org/netdev/[email protected]/

Thanks,
Igor

author maintainer
#48 lore raw
In reply to Igor Russkikh
Quoted 19 lines · Igor Russkikh
Quoted 4 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.1.3 release. There are 46 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

...

Quoted 8 lines

Oliver Neukum <[email protected]>
aqc111: fix double endianness swap on BE

Oliver Neukum <[email protected]>
aqc111: fix writing to the phy on BE

Oliver Neukum <[email protected]>
aqc111: fix endianness issue in aqc111_change_mtu

Quoted 6 lines

Hello Greg,

Could you please drop these three patches from the queue? They are invalid and will be reverted in net tree.

https://lore.kernel.org/netdev/[email protected]/

Now dropped from the 5.0 and 5.1 queues.

thanks,

greg k-h

#50 lore raw
In reply to Greg Kroah-Hartman
Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.1.3 release. There are 46 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri 17 May 2019 09:04:22 AM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.3-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
and the diffstat can be found below.

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 5.1.3-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.1.y
git commit: 6c9703ae24981e4e4fa32f4e181fdcfc94988591
git describe: v5.1.2-47-g6c9703ae2498
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.1-oe/build/v5.1.2-47-g6c9703ae2498

No regressions (compared to build v5.1.2)

No fixes (compared to build v5.1.2)

Ran 19126 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libgpiod
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* ltp-fs-tests
* ltp-open-posix-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

Signature · 2 lines
Linaro LKFT
https://lkft.linaro.org
#52 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.1.3 release. There are 46 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri 17 May 2019 09:04:22 AM UTC. Anything received after that time might be too late.

Build results:

	total: 159 pass: 159 fail: 0
Qemu test results:
	total: 349 pass: 349 fail: 0

Guenter

author maintainer
#53 lore raw
Quoted 6 lines · Guenter Roeck
Quoted 5 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.1.3 release. There are 46 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Quoted 8 lines
Quoted 3 lines

Responses should be made by Fri 17 May 2019 09:04:22 AM UTC. Anything received after that time might be too late.

Build results:

	total: 159 pass: 159 fail: 0
Qemu test results:
	total: 349 pass: 349 fail: 0

Many thanks for the quick turn-around on testing all of these and letting me know.

greg k-h

author maintainer
#51 lore raw
In reply to Naresh Kamboju
Quoted 17 lines · Naresh Kamboju
Quoted 15 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.1.3 release. There are 46 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri 17 May 2019 09:04:22 AM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

        https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.3-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
and the diffstat can be found below.

Quoted 6 lines
Quoted 3 lines

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Wonderful!

Thanks for testing all of these and letting me know.

greg k-h

maintainer
#54 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.1.3 release. There are 46 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri 17 May 2019 09:04:22 AM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.3-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
and the diffstat can be found below.

thanks,

greg k-h

All tests are passing for Tegra ...

Test results for stable-v5.1:

    12 builds:	12 pass, 0 fail
    22 boots:	22 pass, 0 fail
    32 tests:	32 pass, 0 fail

Linux version: 5.1.3-rc1-g6c9703a
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

Signature · 1 line
nvpublic
#56 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.1.3 release. There are 46 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri 17 May 2019 09:04:22 AM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.3-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
and the diffstat can be found below.

thanks,

greg k-h

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

author maintainer
#57 lore raw
Quoted 15 lines · shuah
Quoted 14 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.1.3 release. There are 46 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri 17 May 2019 09:04:22 AM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.3-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
and the diffstat can be found below.

Quoted 6 lines
Quoted 4 lines

thanks,

greg k-h

Compiled and booted on my test system. No dmesg regressions.

Thanks for testing all of these and letting me know.

greg k-h

author maintainer
#55 lore raw
In reply to Jon Hunter
Quoted 23 lines · Jon Hunter
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.1.3 release. There are 46 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri 17 May 2019 09:04:22 AM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.3-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
and the diffstat can be found below.

thanks,

greg k-h

All tests are passing for Tegra ...

Test results for stable-v5.1:

Quoted 9 lines
    12 builds:	12 pass, 0 fail
    22 boots:	22 pass, 0 fail
    32 tests:	32 pass, 0 fail

Linux version: 5.1.3-rc1-g6c9703a
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Thanks for testing all of these and letting me know.

greg k-h

#58 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.1.3 release. There are 46 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri 17 May 2019 09:04:22 AM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.3-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
and the diffstat can be found below.

thanks,

greg k-h

Compiled and booted with no dmesg regressions on my system.

Cheers,
Kelsey

author maintainer
#59 lore raw
Quoted 15 lines · Kelsey Skunberg
Quoted 14 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.1.3 release. There are 46 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri 17 May 2019 09:04:22 AM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.3-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
and the diffstat can be found below.

Quoted 5 lines
Quoted 3 lines

thanks,

greg k-h

Compiled and booted with no dmesg regressions on my system.

Thanks for testing some of these and letting me know.

greg k-h