Skip to contentSkip to conversation

armv8: ls1028a: Add ecc address node for sata.

PATCH New Peng Ma 2 participants 2 messages May 23, 2019 – Jun 19, 2019 Arm (32-bit)

lore
Share & tools
lore

Peng Ma

author
#0 lore raw

PATCH 1/1 armv8: ls1028a: Add ecc address node for sata.

Move the ecc addr from driver to dts

---
 arch/arm/dts/fsl-ls1028a.dtsi |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)
arch/arm/dts/fsl-ls1028a.dtsi +3 -2
index e6a443a..29a0858 100644
@@ -272,9 +272,10 @@
 
 	sata: sata at 3200000 {
 		compatible = "fsl,ls1028a-ahci";
-		reg = <0x0 0x3200000 0x0 0x10000>;
+		reg = <0x0 0x3200000 0x0 0x10000	/* ccsr sata base */
+		       0x7 0x100520  0x0 0x4>;		/* ecc sata addr*/
+		reg-names = "sata-base", "ecc-addr";
 		interrupts = <0 133 4>;
-		clocks = <&clockgen 4 1>;
 		status = "disabled";
 	};
 
Signature · 1 line
1.7.1
#1 lore raw

PATCH 1/1 armv8: ls1028a: Add ecc address node for sata.

Quoted 11 lines

-----Original Message-----
From: Peng Ma <[email protected]>
Sent: Thursday, May 23, 2019 9:37 AM
To: Prabhakar Kushwaha <[email protected]>; albert.u.boot at aribaud.net
Cc: Sudhanshu Gupta <[email protected]>; Rajesh Bhagat <[email protected]>; Qiang Zhao <[email protected]>; Andy Tang <[email protected]>; u-boot at lists.denx.de; Peng Ma <[email protected]>
Subject: [PATCH] armv8: ls1028a: Add ecc address node for sata.

Quoted 7 lines

Move the ecc addr from driver to dts

---
 arch/arm/dts/fsl-ls1028a.dtsi |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)

This patch has been applied to fsl-qoriq master, awaiting upstream.

--pk