Refactor to expand subslice mask
Subsystems (2)
cover Refactor to expand subslice mask
This patch series contains a few code clean-up patches, followed by a patch which changes the storage of the subslice mask to better match the userspace access through the I915_QUERY_TOPOLOGY_INFO ioctl. The index into the subslice_mask array is then calculated:
slice * subslice stride + subslice index / 8
v2: fix i915_pm_sseu test failure
v3: no changes to patches in the series, just resending to pick up
in CI correctly
v4: rebase
v5: fix header test
v6: address review comments from Jari
address minor checkpatch warning in existing code use eu_stride for EU div-by-8
v7: another rebase
v8: address review comments from Tvrtko and Daniele
v9: address review comments from Daniele
v10: add reviewed-by on last patch with minor suggested change,
rebase, and repost for CI
Stuart Summers (5):
drm/i915: Use local variable for SSEU info in GETPARAM ioctl drm/i915: Add macro for SSEU stride calculation drm/i915: Move calculation of subslices per slice to new function drm/i915: Refactor sseu helper functions
drm/i915: Expand subslice mask
drivers/gpu/drm/i915/gt/intel_engine_cs.c | 24 ++- drivers/gpu/drm/i915/gt/intel_engine_types.h | 30 ++-- drivers/gpu/drm/i915/gt/intel_hangcheck.c | 3 +- drivers/gpu/drm/i915/gt/intel_sseu.c | 62 +++++++ drivers/gpu/drm/i915/gt/intel_sseu.h | 35 +++- drivers/gpu/drm/i915/gt/intel_workarounds.c | 2 +- drivers/gpu/drm/i915/i915_debugfs.c | 46 ++--- drivers/gpu/drm/i915/i915_drv.c | 15 +- drivers/gpu/drm/i915/i915_gpu_error.c | 5 +- drivers/gpu/drm/i915/i915_query.c | 15 +- drivers/gpu/drm/i915/intel_device_info.c | 176 +++++++++++-------- drivers/gpu/drm/i915/intel_device_info.h | 47 ----- 12 files changed, 280 insertions(+), 180 deletions(-)
Signature · 6 lines
2.21.0.5.gaeb582a983 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 2/5 drm/i915: Add macro for SSEU stride calculation
Subslice stride and EU stride are calculated multiple times in i915_query. Move this calculation to a macro to reduce code duplication.
v2: update headers in intel_sseu.h
v3: use GEN_SSEU_STRIDE for stride calculations in intel_sseu.h
apply s/bits/max_entries/ to GEN_SSEU_STRIDE parameter
--- drivers/gpu/drm/i915/gt/intel_sseu.h | 2 ++ drivers/gpu/drm/i915/i915_query.c | 17 ++++++++--------- drivers/gpu/drm/i915/intel_device_info.h | 9 +++------ 3 files changed, 13 insertions(+), 15 deletions(-)
drivers/gpu/drm/i915/gt/intel_sseu.h +2 -0
@@ -8,11 +8,13 @@#define __INTEL_SSEU_H__#include <linux/types.h> +#include <linux/kernel.h> struct drm_i915_private ;#define GEN_MAX_SLICES (6)/* CNL upper bound */ #define GEN_MAX_SUBSLICES (8)/* ICL upper bound */ +#define GEN_SSEU_STRIDE (max_entries) DIV_ROUND_UP(max_entries, BITS_PER_BYTE)struct sseu_dev_info {u8 slice_mask;
drivers/gpu/drm/i915/i915_query.c +8 -9
@@ -37,6 +37,8 @@ static int query_topology_info(struct drm_i915_private *dev_priv,const struct sseu_dev_info *sseu = &RUNTIME_INFO (dev_priv)->sseu;struct drm_i915_query_topology_info topo;u32 slice_length, subslice_length, eu_length, total_length; +u8 subslice_stride =GEN_SSEU_STRIDE (sseu->max_subslices); +u8 eu_stride =GEN_SSEU_STRIDE (sseu->max_eus_per_subslice);int ret;if (query_item->flags !=0 )
@@ -48,12 +50,10 @@ static int query_topology_info(struct drm_i915_private *dev_priv,BUILD_BUG_ON (sizeof (u8) !=sizeof (sseu->slice_mask)); slice_length =sizeof (sseu->slice_mask); - subslice_length = sseu->max_slices * -DIV_ROUND_UP (sseu->max_subslices,BITS_PER_BYTE ); - eu_length = sseu->max_slices * sseu->max_subslices * -DIV_ROUND_UP (sseu->max_eus_per_subslice,BITS_PER_BYTE ); - - total_length =sizeof (topo) + slice_length + subslice_length + eu_length; + subslice_length = sseu->max_slices * subslice_stride; + eu_length = sseu->max_slices * sseu->max_subslices * eu_stride; + total_length =sizeof (topo) + slice_length + subslice_length + + eu_length; ret =copy_query_item (&topo,sizeof (topo), total_length, query_item);
@@ -69,10 +69,9 @@ static int query_topology_info(struct drm_i915_private *dev_priv, topo.max_eus_per_subslice = sseu->max_eus_per_subslice; topo.subslice_offset = slice_length; - topo.subslice_stride =DIV_ROUND_UP (sseu->max_subslices,BITS_PER_BYTE ); + topo.subslice_stride = subslice_stride; topo.eu_offset = slice_length + subslice_length; - topo.eu_stride = -DIV_ROUND_UP (sseu->max_eus_per_subslice,BITS_PER_BYTE ); + topo.eu_stride = eu_stride;if (__copy_to_user (u64_to_user_ptr (query_item->data_ptr), &topo,sizeof (topo)))
drivers/gpu/drm/i915/intel_device_info.h +3 -6
@@ -231,8 +231,7 @@ static inline unsigned int sseu_subslice_total(const struct sseu_dev_info *sseu)static inline int sseu_eu_idx (const struct sseu_dev_info *sseu,int slice,int subslice) { -int subslice_stride =DIV_ROUND_UP (sseu->max_eus_per_subslice, -BITS_PER_BYTE ); +int subslice_stride =GEN_SSEU_STRIDE (sseu->max_eus_per_subslice);int slice_stride = sseu->max_subslices * subslice_stride;return slice * slice_stride + subslice * subslice_stride;
@@ -244,8 +243,7 @@ static inline u16 sseu_get_eus(const struct sseu_dev_info *sseu,int i, offset =sseu_eu_idx (sseu, slice, subslice);u16 eu_mask =0 ; -for (i =0 ; - i <DIV_ROUND_UP (sseu->max_eus_per_subslice,BITS_PER_BYTE ); i++) { +for (i =0 ; i <GEN_SSEU_STRIDE (sseu->max_eus_per_subslice); i++) { eu_mask |= ((u16 ) sseu->eu_mask[offset + i]) << (i *BITS_PER_BYTE ); }
@@ -258,8 +256,7 @@ static inline void sseu_set_eus(struct sseu_dev_info *sseu, {int i, offset =sseu_eu_idx (sseu, slice, subslice); -for (i =0 ; - i <DIV_ROUND_UP (sseu->max_eus_per_subslice,BITS_PER_BYTE ); i++) { +for (i =0 ; i <GEN_SSEU_STRIDE (sseu->max_eus_per_subslice); i++) { sseu->eu_mask[offset + i] = (eu_mask >> (BITS_PER_BYTE * i)) &0xff ; }
Signature · 6 lines
2.21.0.5.gaeb582a983 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 3/5 drm/i915: Move calculation of subslices per slice to new function
In reply to Stuart SummersAdd a new function to return the number of subslices per slice to consolidate code usage.
v2: rebase on changes to move sseu struct to intel_sseu.h
v3: add intel_* prefix to sseu_subslices_per_slice
--- drivers/gpu/drm/i915/gt/intel_sseu.h | 6 ++++++ drivers/gpu/drm/i915/i915_debugfs.c | 2 +- drivers/gpu/drm/i915/intel_device_info.c | 4 ++-- 3 files changed, 9 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/gt/intel_sseu.h +6 -0
@@ -63,6 +63,12 @@ intel_sseu_from_device_info(const struct sseu_dev_info *sseu)return value; } +static inline unsigned int +intel_sseu_subslices_per_slice (const struct sseu_dev_info *sseu,u8 slice) +{ +return hweight8 (sseu->subslice_mask[slice]); +} +u32 intel_sseu_make_rpcs (struct drm_i915_private *i915,const struct intel_sseu *req_sseu);
drivers/gpu/drm/i915/i915_debugfs.c +1 -1
@@ -4203,7 +4203,7 @@ static void i915_print_sseu_info(struct seq_file *m, bool is_available_info, sseu_subslice_total(sseu));for (s =0 ; s <fls (sseu->slice_mask); s++) {seq_printf (m," %s Slice%i subslices: %u\n" , type, - s,hweight8 (sseu->subslice_mask[s])); + s,intel_sseu_subslices_per_slice (sseu, s)); }seq_printf (m," %s EU Total: %u\n" , type, sseu->eu_total);
drivers/gpu/drm/i915/intel_device_info.c +2 -2
@@ -93,7 +93,7 @@ static void sseu_dump(const struct sseu_dev_info *sseu, struct drm_printer *p)drm_printf (p,"subslice total: %u\n" ,sseu_subslice_total (sseu));for (s =0 ; s < sseu->max_slices; s++) {drm_printf (p,"slice%d: %u subslices, mask=%04x\n" , - s,hweight8 (sseu->subslice_mask[s]), + s,intel_sseu_subslices_per_slice (sseu, s), sseu->subslice_mask[s]); }drm_printf (p,"EU total: %u\n" , sseu->eu_total);
@@ -126,7 +126,7 @@ void intel_device_info_dump_topology(const struct sseu_dev_info *sseu,for (s =0 ; s < sseu->max_slices; s++) {drm_printf (p,"slice%d: %u subslice(s) (0x%hhx):\n" , - s,hweight8 (sseu->subslice_mask[s]), + s,intel_sseu_subslices_per_slice (sseu, s), sseu->subslice_mask[s]);for (ss =0 ; ss < sseu->max_subslices; ss++) {
Signature · 6 lines
2.21.0.5.gaeb582a983 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 4/5 drm/i915: Refactor sseu helper functions
In reply to Stuart SummersMove functions to intel_sseu.h and remove inline qualifier. Additionally, ensure these are all prefixed with intel_sseu_* to match the convention of other functions in i915.
v2: fix spacing from checkpatch warning
v3: squash helper function changes into a single patch
break 80 character line to fix checkpatch warning move get/set_eus helpers to intel_device_info.c
v4: Remove intel_ prefix from static functions in
intel_device_info.c and correctly copy changes to stride calculation in those functions.
--- drivers/gpu/drm/i915/gt/intel_sseu.c | 17 +++++++ drivers/gpu/drm/i915/gt/intel_sseu.h | 10 ++-- drivers/gpu/drm/i915/i915_debugfs.c | 4 +- drivers/gpu/drm/i915/i915_drv.c | 2 +- drivers/gpu/drm/i915/intel_device_info.c | 60 +++++++++++++++++++----- drivers/gpu/drm/i915/intel_device_info.h | 44 ----------------- 6 files changed, 74 insertions(+), 63 deletions(-)
drivers/gpu/drm/i915/gt/intel_sseu.c +17 -0
@@ -8,6 +8,23 @@#include "intel_lrc_reg.h" #include "intel_sseu.h" +unsigned int +intel_sseu_subslice_total (const struct sseu_dev_info *sseu) +{ +unsigned int i, total =0 ; + +for (i =0 ; i <ARRAY_SIZE (sseu->subslice_mask); i++) + total +=hweight8 (sseu->subslice_mask[i]); + +return total; +} + +unsigned int +intel_sseu_subslices_per_slice (const struct sseu_dev_info *sseu,u8 slice) +{ +return hweight8 (sseu->subslice_mask[slice]); +} +u32 intel_sseu_make_rpcs (struct drm_i915_private *i915,const struct intel_sseu *req_sseu) {
drivers/gpu/drm/i915/gt/intel_sseu.h +5 -5
@@ -63,11 +63,11 @@ intel_sseu_from_device_info(const struct sseu_dev_info *sseu)return value; } -static inline unsigned int -intel_sseu_subslices_per_slice (const struct sseu_dev_info *sseu,u8 slice) -{ -return hweight8 (sseu->subslice_mask[slice]); -} +unsigned int +intel_sseu_subslice_total (const struct sseu_dev_info *sseu); + +unsigned int +intel_sseu_subslices_per_slice (const struct sseu_dev_info *sseu,u8 slice);u32 intel_sseu_make_rpcs (struct drm_i915_private *i915,const struct intel_sseu *req_sseu);
drivers/gpu/drm/i915/i915_debugfs.c +2 -2
@@ -4176,7 +4176,7 @@ static void broadwell_sseu_device_status(struct drm_i915_private *dev_priv,RUNTIME_INFO (dev_priv)->sseu.subslice_mask[s]; } sseu->eu_total = sseu->eu_per_subslice * -sseu_subslice_total (sseu); +intel_sseu_subslice_total (sseu);/* subtract fused off EU(s) from enabled slice(s) */ for (s =0 ; s <fls (sseu->slice_mask); s++) {
@@ -4200,7 +4200,7 @@ static void i915_print_sseu_info(struct seq_file *m, bool is_available_info,seq_printf (m," %s Slice Total: %u\n" , type,hweight8 (sseu->slice_mask));seq_printf (m," %s Subslice Total: %u\n" , type, -sseu_subslice_total (sseu)); +intel_sseu_subslice_total (sseu));for (s =0 ; s <fls (sseu->slice_mask); s++) {seq_printf (m," %s Slice%i subslices: %u\n" , type, s,intel_sseu_subslices_per_slice (sseu, s));
drivers/gpu/drm/i915/i915_drv.c +1 -1
@@ -383,7 +383,7 @@ static int i915_getparam_ioctl(struct drm_device *dev, void *data, value =i915_cmd_parser_get_version (dev_priv);break ;case I915_PARAM_SUBSLICE_TOTAL : - value =sseu_subslice_total (sseu); + value =intel_sseu_subslice_total (sseu);if (!value)return -ENODEV ;break ;
drivers/gpu/drm/i915/intel_device_info.c +49 -11
111 lines not on this page · raw message
drivers/gpu/drm/i915/intel_device_info.h +0 -44
50 lines not on this page · raw message
Signature · 6 lines
2.21.0.5.gaeb582a983 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 1/5 drm/i915: Use local variable for SSEU info in GETPARAM ioctl
In reply to Stuart SummersIn the GETPARAM ioctl handler, use a local variable to consolidate usage of SSEU runtime info.
v2: add const to sseu_dev_info variable
--- drivers/gpu/drm/i915/i915_drv.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +6 -5
@@ -329,6 +329,7 @@ static int i915_getparam_ioctl(struct drm_device *dev, void *data, {struct drm_i915_private *dev_priv =to_i915 (dev);struct pci_dev *pdev = dev_priv->drm.pdev; +const struct sseu_dev_info *sseu = &RUNTIME_INFO (dev_priv)->sseu;drm_i915_getparam_t *param = data;int value;
@@ -382,12 +383,12 @@ static int i915_getparam_ioctl(struct drm_device *dev, void *data, value =i915_cmd_parser_get_version (dev_priv);break ;case I915_PARAM_SUBSLICE_TOTAL : - value =sseu_subslice_total (&RUNTIME_INFO (dev_priv)->sseu); + value =sseu_subslice_total (sseu);if (!value)return -ENODEV ;break ;case I915_PARAM_EU_TOTAL : - value =RUNTIME_INFO (dev_priv)->sseu.eu_total; + value = sseu->eu_total;if (!value)return -ENODEV ;break ;
@@ -404,7 +405,7 @@ static int i915_getparam_ioctl(struct drm_device *dev, void *data, value =HAS_POOLED_EU (dev_priv);break ;case I915_PARAM_MIN_EU_IN_POOL : - value =RUNTIME_INFO (dev_priv)->sseu.min_eu_in_pool; + value = sseu->min_eu_in_pool;break ;case I915_PARAM_HUC_STATUS : value =intel_huc_check_status (&dev_priv->huc);
@@ -455,12 +456,12 @@ static int i915_getparam_ioctl(struct drm_device *dev, void *data, value =intel_engines_has_context_isolation (dev_priv);break ;case I915_PARAM_SLICE_MASK : - value =RUNTIME_INFO (dev_priv)->sseu.slice_mask; + value = sseu->slice_mask;if (!value)return -ENODEV ;break ;case I915_PARAM_SUBSLICE_MASK : - value =RUNTIME_INFO (dev_priv)->sseu.subslice_mask[0 ]; + value = sseu->subslice_mask[0 ];if (!value)return -ENODEV ;break ;
Signature · 6 lines
2.21.0.5.gaeb582a983 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 5/5 drm/i915: Expand subslice mask
In reply to Stuart SummersCurrently, the subslice_mask runtime parameter is stored as an array of subslices per slice. Expand the subslice mask array to better match what is presented to userspace through the I915_QUERY_TOPOLOGY_INFO ioctl. The index into this array is then calculated:
slice * subslice stride + subslice index / 8
v2: fix spacing in set_sseu_info args
use set_sseu_info to initialize sseu data when building device status in debugfs
rename variables in intel_engine_types.h to avoid checkpatch warnings
v3: update headers in intel_sseu.h
v4: add const to some sseu_dev_info variables
use sseu->eu_stride for EU stride calculations
v5: address review comments from Tvrtko and Daniele
v6: remove extra space in intel_sseu_get_subslices
return the correct subslice enable in for_each_instdone add GEM_BUG_ON to ensure user doesn't pass invalid ss_mask size use printk formatted string for subslice mask
v7: remove string.h header and rebase
--- drivers/gpu/drm/i915/gt/intel_engine_cs.c | 24 +++- drivers/gpu/drm/i915/gt/intel_engine_types.h | 30 ++--- drivers/gpu/drm/i915/gt/intel_hangcheck.c | 3 +- drivers/gpu/drm/i915/gt/intel_sseu.c | 47 ++++++- drivers/gpu/drm/i915/gt/intel_sseu.h | 27 +++- drivers/gpu/drm/i915/gt/intel_workarounds.c | 2 +- drivers/gpu/drm/i915/i915_debugfs.c | 40 +++--- drivers/gpu/drm/i915/i915_drv.c | 6 +- drivers/gpu/drm/i915/i915_gpu_error.c | 5 +- drivers/gpu/drm/i915/i915_query.c | 10 +- drivers/gpu/drm/i915/intel_device_info.c | 122 +++++++++---------- 11 files changed, 200 insertions(+), 116 deletions(-)
drivers/gpu/drm/i915/gt/intel_engine_cs.c +22 -2
@@ -951,12 +951,30 @@ const char *i915_cache_level_str(struct drm_i915_private *i915, int type) } } +static inline u32 +intel_sseu_fls_subslice (const struct sseu_dev_info *sseu,u32 slice) +{ +u32 subslice; +int i; + +for (i = sseu->ss_stride -1 ; i >=0 ; i--) { + subslice =fls (sseu->subslice_mask[slice * sseu->ss_stride + + i]); +if (subslice) { + subslice += i *BITS_PER_BYTE ; +break ; + } + } + +return subslice; +} +u32 intel_calculate_mcr_s_ss_select (struct drm_i915_private *dev_priv) {const struct sseu_dev_info *sseu = &RUNTIME_INFO (dev_priv)->sseu;u32 mcr_s_ss_select;u32 slice =fls (sseu->slice_mask); -u32 subslice =fls (sseu->subslice_mask[slice]); +u32 subslice =intel_sseu_fls_subslice (sseu, slice);if (IS_GEN (dev_priv,10 )) mcr_s_ss_select = GEN8_MCR_SLICE(slice) |
@@ -1032,6 +1050,7 @@ void intel_engine_get_instdone(struct intel_engine_cs *engine, struct intel_instdone *instdone) {struct drm_i915_private *dev_priv = engine->i915; +const struct sseu_dev_info *sseu = &RUNTIME_INFO (dev_priv)->sseu;struct intel_uncore *uncore = engine->uncore;u32 mmio_base = engine->mmio_base;int slice;
@@ -1049,7 +1068,8 @@ void intel_engine_get_instdone(struct intel_engine_cs *engine, instdone->slice_common =intel_uncore_read (uncore,GEN7_SC_INSTDONE ); -for_each_instdone_slice_subslice (dev_priv, slice, subslice) { +for_each_instdone_slice_subslice (dev_priv, sseu, slice, + subslice) { instdone->sampler[slice][subslice] =read_subslice_reg (dev_priv, slice, subslice,GEN7_SAMPLER_INSTDONE );
drivers/gpu/drm/i915/gt/intel_engine_types.h +15 -15
@@ -551,20 +551,20 @@ intel_engine_is_virtual(const struct intel_engine_cs *engine) return engine->flags & I915_ENGINE_IS_VIRTUAL; } -#define instdone_slice_mask (dev_priv__) \ - (IS_GEN(dev_priv__, 7) ? \ - 1 : RUNTIME_INFO(dev_priv__)->sseu.slice_mask) - -#define instdone_subslice_mask (dev_priv__) \ - (IS_GEN(dev_priv__, 7) ? \ - 1 : RUNTIME_INFO(dev_priv__)->sseu.subslice_mask[0]) - -#define for_each_instdone_slice_subslice (dev_priv__, slice__, subslice__) \ - for ((slice__) = 0, (subslice__) = 0; \ - (slice__) < I915_MAX_SLICES; \ - (subslice__) = ((subslice__) + 1) < I915_MAX_SUBSLICES ? (subslice__) + 1 : 0, \ - (slice__) += ((subslice__) == 0)) \ - for_each_if((BIT(slice__) & instdone_slice_mask(dev_priv__)) && \ - (BIT(subslice__) & instdone_subslice_mask(dev_priv__))) +#define instdone_has_slice (dev_priv___, sseu___, slice___) \ + ((IS_GEN(dev_priv___, 7) ? 1 : ((sseu___)->slice_mask)) & \ + BIT(slice___)) + +#define instdone_has_subslice (dev_priv__, sseu__, slice__, subslice__) \ + (IS_GEN(dev_priv__, 7) ? (1 & BIT(subslice__)) : \ + intel_sseu_has_subslice(sseu__, slice__, subslice__)) + +#define for_each_instdone_slice_subslice (dev_priv_, sseu_, slice_, subslice_) \ + for ((slice_) = 0, (subslice_) = 0; (slice_) < I915_MAX_SLICES; \ + (subslice_) = ((subslice_) + 1) % I915_MAX_SUBSLICES, \ + (slice_) += ((subslice_) == 0)) \ + for_each_if((instdone_has_slice(dev_priv_, sseu_, slice_)) && \ + (instdone_has_subslice(dev_priv_, sseu_, slice_, \ + subslice_)))#endif /* __INTEL_ENGINE_TYPES_H__ */
drivers/gpu/drm/i915/gt/intel_hangcheck.c +2 -1
@@ -51,6 +51,7 @@ static bool instdone_unchanged(u32 current_instdone, u32 *old_instdone)static bool subunits_stuck (struct intel_engine_cs *engine) {struct drm_i915_private *dev_priv = engine->i915; +const struct sseu_dev_info *sseu = &RUNTIME_INFO (dev_priv)->sseu;struct intel_instdone instdone;struct intel_instdone *accu_instdone = &engine->hangcheck.instdone;bool stuck;
@@ -72,7 +73,7 @@ static bool subunits_stuck(struct intel_engine_cs *engine) stuck &=instdone_unchanged (instdone.slice_common, &accu_instdone->slice_common); -for_each_instdone_slice_subslice (dev_priv, slice, subslice) { +for_each_instdone_slice_subslice (dev_priv, sseu, slice, subslice) { stuck &=instdone_unchanged (instdone.sampler[slice][subslice], &accu_instdone->sampler[slice][subslice]); stuck &= instdone_unchanged(instdone.row[slice][subslice],
drivers/gpu/drm/i915/gt/intel_sseu.c +46 -1
62 lines not on this page · raw message
drivers/gpu/drm/i915/gt/intel_sseu.h +26 -1
@@ -15,10 +15,11 @@ struct drm_i915_private;#define GEN_MAX_SLICES (6)/* CNL upper bound */ #define GEN_MAX_SUBSLICES (8)/* ICL upper bound */ #define GEN_SSEU_STRIDE (max_entries) DIV_ROUND_UP(max_entries, BITS_PER_BYTE) +#define GEN_MAX_SUBSLICE_STRIDE GEN_SSEU_STRIDE(GEN_MAX_SUBSLICES)struct sseu_dev_info {u8 slice_mask; -u8 subslice_mask[GEN_MAX_SLICES ]; +u8 subslice_mask[GEN_MAX_SLICES *GEN_MAX_SUBSLICE_STRIDE ];u16 eu_total;u8 eu_per_subslice;u8 min_eu_in_pool;
@@ -33,6 +34,9 @@ struct sseu_dev_info {u8 max_subslices;u8 max_eus_per_subslice; +u8 ss_stride; +u8 eu_stride; +/* We don't have more than 8 eus per subslice at the moment and as we * store eus enabled using bits, no need to multiply by eus per * subslice.
@@ -63,12 +67,33 @@ intel_sseu_from_device_info(const struct sseu_dev_info *sseu)return value; } +static inline bool +intel_sseu_has_subslice (const struct sseu_dev_info *sseu,int slice, +int subslice) +{ +u8 mask = sseu->subslice_mask[slice * sseu->ss_stride + + subslice /BITS_PER_BYTE ]; + +return mask &BIT (subslice %BITS_PER_BYTE ); +} + +void intel_sseu_set_info (struct sseu_dev_info *sseu,u8 max_slices, +u8 max_subslices,u8 max_eus_per_subslice); +unsigned int intel_sseu_subslice_total (const struct sseu_dev_info *sseu);unsigned int intel_sseu_subslices_per_slice (const struct sseu_dev_info *sseu,u8 slice); +void intel_sseu_copy_subslices (const struct sseu_dev_info *sseu,int slice, +u8 *to_mask); + +u32 intel_sseu_get_subslices (const struct sseu_dev_info *sseu,u8 slice); + +void intel_sseu_set_subslices (struct sseu_dev_info *sseu,int slice, +u32 ss_mask); +u32 intel_sseu_make_rpcs (struct drm_i915_private *i915,const struct intel_sseu *req_sseu);
drivers/gpu/drm/i915/gt/intel_workarounds.c +1 -1
@@ -783,7 +783,7 @@ wa_init_mcr(struct drm_i915_private *i915, struct i915_wa_list *wal)u32 slice =fls (sseu->slice_mask);u32 fuse3 =intel_uncore_read (&i915->uncore,GEN10_MIRROR_FUSE3 ); -u8 ss_mask = sseu->subslice_mask[slice]; +u32 ss_mask =intel_sseu_get_subslices (sseu, slice);u8 enabled_mask = (ss_mask | ss_mask >>GEN10_L3BANK_PAIR_COUNT ) &GEN10_L3BANK_MASK ;
drivers/gpu/drm/i915/i915_debugfs.c +21 -19
@@ -1271,6 +1271,7 @@ static void i915_instdone_info(struct drm_i915_private *dev_priv,struct seq_file *m, struct intel_instdone *instdone) { + struct sseu_dev_info *sseu = &RUNTIME_INFO(dev_priv)->sseu;int slice;int subslice;
@@ -1286,11 +1287,11 @@ static void i915_instdone_info(struct drm_i915_private *dev_priv,if (INTEL_GEN (dev_priv) <=6 )return ; -for_each_instdone_slice_subslice (dev_priv, slice, subslice) +for_each_instdone_slice_subslice (dev_priv, sseu, slice, subslice)seq_printf (m,"\t\tSAMPLER_INSTDONE[%d][%d]: 0x%08x\n" , slice, subslice, instdone->sampler[slice][subslice]); -for_each_instdone_slice_subslice (dev_priv, slice, subslice) +for_each_instdone_slice_subslice (dev_priv, sseu, slice, subslice)seq_printf (m,"\t\tROW_INSTDONE[%d][%d]: 0x%08x\n" , slice, subslice, instdone->row[slice][subslice]); }
@@ -4084,7 +4085,7 @@ static void gen10_sseu_device_status(struct drm_i915_private *dev_priv,continue ; sseu->slice_mask |=BIT (s); - sseu->subslice_mask[s] = info->sseu.subslice_mask[s]; +intel_sseu_copy_subslices (&info->sseu, s, sseu->subslice_mask);for (ss =0 ; ss < info->sseu.max_subslices; ss++) {unsigned int eu_cnt;
@@ -4135,18 +4136,21 @@ static void gen9_sseu_device_status(struct drm_i915_private *dev_priv, sseu->slice_mask |=BIT (s);if (IS_GEN9_BC (dev_priv)) - sseu->subslice_mask[s] = -RUNTIME_INFO (dev_priv)->sseu.subslice_mask[s]; +intel_sseu_copy_subslices (&info->sseu, s, + sseu->subslice_mask);for (ss =0 ; ss < info->sseu.max_subslices; ss++) {unsigned int eu_cnt; +u8 ss_idx = s * info->sseu.ss_stride + + ss /BITS_PER_BYTE ;if (IS_GEN9_LP (dev_priv)) {if (!(s_reg[s] & (GEN9_PGCTL_SS_ACK (ss))))/* skip disabled subslice */ continue ; - sseu->subslice_mask[s] |=BIT (ss); + sseu->subslice_mask[ss_idx] |= +BIT (ss %BITS_PER_BYTE ); } eu_cnt = 2 * hweight32(eu_reg[2*s + ss/2] &
@@ -4163,25 +4167,23 @@ static void gen9_sseu_device_status(struct drm_i915_private *dev_priv,static void broadwell_sseu_device_status (struct drm_i915_private *dev_priv,struct sseu_dev_info *sseu) { +struct intel_runtime_info *info =RUNTIME_INFO (dev_priv);u32 slice_info =I915_READ (GEN8_GT_SLICE_INFO );int s; sseu->slice_mask = slice_info &GEN8_LSLICESTAT_MASK ;if (sseu->slice_mask) { - sseu->eu_per_subslice = -RUNTIME_INFO (dev_priv)->sseu.eu_per_subslice; -for (s =0 ; s <fls (sseu->slice_mask); s++) { - sseu->subslice_mask[s] = -RUNTIME_INFO (dev_priv)->sseu.subslice_mask[s]; - } + sseu->eu_per_subslice = info->sseu.eu_per_subslice; +for (s =0 ; s <fls (sseu->slice_mask); s++) +intel_sseu_copy_subslices (&info->sseu, s, + sseu->subslice_mask); sseu->eu_total = sseu->eu_per_subslice *intel_sseu_subslice_total (sseu);/* subtract fused off EU(s) from enabled slice(s) */ for (s =0 ; s <fls (sseu->slice_mask); s++) { -u8 subslice_7eu = -RUNTIME_INFO (dev_priv)->sseu.subslice_7eu[s]; +u8 subslice_7eu = info->sseu.subslice_7eu[s]; sseu->eu_total -=hweight8 (subslice_7eu); }
@@ -4228,6 +4230,7 @@ static void i915_print_sseu_info(struct seq_file *m, bool is_available_info,static int i915_sseu_status (struct seq_file *m,void *unused) {struct drm_i915_private *dev_priv =node_to_i915 (m->private); +const struct intel_runtime_info *info =RUNTIME_INFO (dev_priv);struct sseu_dev_info sseu;intel_wakeref_t wakeref;
@@ -4235,14 +4238,13 @@ static int i915_sseu_status(struct seq_file *m, void *unused)return -ENODEV ;seq_puts (m,"SSEU Device Info\n" ); -i915_print_sseu_info (m, true, &RUNTIME_INFO (dev_priv)->sseu); +i915_print_sseu_info (m, true, &info->sseu);seq_puts (m,"SSEU Device Status\n" );memset (&sseu,0 ,sizeof (sseu)); - sseu.max_slices =RUNTIME_INFO (dev_priv)->sseu.max_slices; - sseu.max_subslices =RUNTIME_INFO (dev_priv)->sseu.max_subslices; - sseu.max_eus_per_subslice = -RUNTIME_INFO (dev_priv)->sseu.max_eus_per_subslice; +intel_sseu_set_info (&sseu, info->sseu.max_slices, + info->sseu.max_subslices, + info->sseu.max_eus_per_subslice); with_intel_runtime_pm(dev_priv, wakeref) {if (IS_CHERRYVIEW (dev_priv))
drivers/gpu/drm/i915/i915_drv.c +4 -2
@@ -331,7 +331,7 @@ static int i915_getparam_ioctl(struct drm_device *dev, void *data,struct pci_dev *pdev = dev_priv->drm.pdev;const struct sseu_dev_info *sseu = &RUNTIME_INFO (dev_priv)->sseu;drm_i915_getparam_t *param = data; -int value; +int value =0 ;switch (param->param) {case I915_PARAM_IRQ_ACTIVE :
@@ -461,7 +461,9 @@ static int i915_getparam_ioctl(struct drm_device *dev, void *data,return -ENODEV ;break ;case I915_PARAM_SUBSLICE_MASK : - value = sseu->subslice_mask[0 ]; +/* Only copy bits from the first slice */ +memcpy (&value, sseu->subslice_mask, +min (sseu->ss_stride, (u8 )sizeof (value)));if (!value)return -ENODEV ;break ;
drivers/gpu/drm/i915/i915_gpu_error.c +3 -2
@@ -408,6 +408,7 @@ static void print_error_buffers(struct drm_i915_error_state_buf *m,static void error_print_instdone (struct drm_i915_error_state_buf *m,const struct drm_i915_error_engine *ee) { +struct sseu_dev_info *sseu = &RUNTIME_INFO (m->i915)->sseu;int slice;int subslice;
@@ -423,12 +424,12 @@ static void error_print_instdone(struct drm_i915_error_state_buf *m,if (INTEL_GEN (m->i915) <=6 )return ; -for_each_instdone_slice_subslice (m->i915, slice, subslice) +for_each_instdone_slice_subslice (m->i915, sseu, slice, subslice)err_printf (m," SAMPLER_INSTDONE[%d][%d]: 0x%08x\n" , slice, subslice, ee->instdone.sampler[slice][subslice]); -for_each_instdone_slice_subslice (m->i915, slice, subslice) +for_each_instdone_slice_subslice (m->i915, sseu, slice, subslice)err_printf (m," ROW_INSTDONE[%d][%d]: 0x%08x\n" , slice, subslice, ee->instdone.row[slice][subslice]);
drivers/gpu/drm/i915/i915_query.c +4 -6
@@ -37,8 +37,6 @@ static int query_topology_info(struct drm_i915_private *dev_priv,const struct sseu_dev_info *sseu = &RUNTIME_INFO (dev_priv)->sseu;struct drm_i915_query_topology_info topo;u32 slice_length, subslice_length, eu_length, total_length; -u8 subslice_stride =GEN_SSEU_STRIDE (sseu->max_subslices); -u8 eu_stride =GEN_SSEU_STRIDE (sseu->max_eus_per_subslice);int ret;if (query_item->flags !=0 )
@@ -50,8 +48,8 @@ static int query_topology_info(struct drm_i915_private *dev_priv,BUILD_BUG_ON (sizeof (u8) !=sizeof (sseu->slice_mask)); slice_length =sizeof (sseu->slice_mask); - subslice_length = sseu->max_slices * subslice_stride; - eu_length = sseu->max_slices * sseu->max_subslices * eu_stride; + subslice_length = sseu->max_slices * sseu->ss_stride; + eu_length = sseu->max_slices * sseu->max_subslices * sseu->eu_stride; total_length =sizeof (topo) + slice_length + subslice_length + eu_length;
@@ -69,9 +67,9 @@ static int query_topology_info(struct drm_i915_private *dev_priv, topo.max_eus_per_subslice = sseu->max_eus_per_subslice; topo.subslice_offset = slice_length; - topo.subslice_stride = subslice_stride; + topo.subslice_stride = sseu->ss_stride; topo.eu_offset = slice_length + subslice_length; - topo.eu_stride = eu_stride; + topo.eu_stride = sseu->eu_stride;if (__copy_to_user (u64_to_user_ptr (query_item->data_ptr), &topo,sizeof (topo)))
drivers/gpu/drm/i915/intel_device_info.c +56 -66
282 lines not on this page · raw message
Signature · 6 lines
2.21.0.5.gaeb582a983 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for Refactor to expand subslice mask (rev10)
In reply to Stuart Summers== Series Details ==
== Series Details ==
Series: Refactor to expand subslice mask (rev10)
URL : https://patchwork.freedesktop.org/series/59742/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip 1d605edfee68 drm/i915: Use local variable for SSEU info in GETPARAM ioctl 1b9931fa807c drm/i915: Add macro for SSEU stride calculation 3ff1c4ffe466 drm/i915: Move calculation of subslices per slice to new function 9380b92a1933 drm/i915: Refactor sseu helper functions 1b9826e9f3ff drm/i915: Expand subslice mask -:115: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'subslice__' - possible side-effects? #115: FILE: drivers/gpu/drm/i915/gt/intel_engine_types.h:558: +#define instdone_has_subslice(dev_priv__, sseu__, slice__, subslice__) \ + (IS_GEN(dev_priv__, 7) ? (1 & BIT(subslice__)) : \ + intel_sseu_has_subslice(sseu__, slice__, subslice__))
-:119: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'dev_priv_' - possible side-effects? #119: FILE: drivers/gpu/drm/i915/gt/intel_engine_types.h:562:
+#define for_each_instdone_slice_subslice(dev_priv_, sseu_, slice_, subslice_) \
+ for ((slice_) = 0, (subslice_) = 0; (slice_) < I915_MAX_SLICES; \
+ (subslice_) = ((subslice_) + 1) % I915_MAX_SUBSLICES, \
+ (slice_) += ((subslice_) == 0)) \
+ for_each_if((instdone_has_slice(dev_priv_, sseu_, slice_)) && \
+ (instdone_has_subslice(dev_priv_, sseu_, slice_, \
+ subslice_)))
-:119: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'sseu_' - possible side-effects? #119: FILE: drivers/gpu/drm/i915/gt/intel_engine_types.h:562:
+#define for_each_instdone_slice_subslice(dev_priv_, sseu_, slice_, subslice_) \
+ for ((slice_) = 0, (subslice_) = 0; (slice_) < I915_MAX_SLICES; \
+ (subslice_) = ((subslice_) + 1) % I915_MAX_SUBSLICES, \
+ (slice_) += ((subslice_) == 0)) \
+ for_each_if((instdone_has_slice(dev_priv_, sseu_, slice_)) && \
+ (instdone_has_subslice(dev_priv_, sseu_, slice_, \
+ subslice_)))
-:119: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'slice_' - possible side-effects? #119: FILE: drivers/gpu/drm/i915/gt/intel_engine_types.h:562:
+#define for_each_instdone_slice_subslice(dev_priv_, sseu_, slice_, subslice_) \
+ for ((slice_) = 0, (subslice_) = 0; (slice_) < I915_MAX_SLICES; \
+ (subslice_) = ((subslice_) + 1) % I915_MAX_SUBSLICES, \
+ (slice_) += ((subslice_) == 0)) \
+ for_each_if((instdone_has_slice(dev_priv_, sseu_, slice_)) && \
+ (instdone_has_subslice(dev_priv_, sseu_, slice_, \
+ subslice_)))
-:119: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'subslice_' - possible side-effects? #119: FILE: drivers/gpu/drm/i915/gt/intel_engine_types.h:562:
+#define for_each_instdone_slice_subslice(dev_priv_, sseu_, slice_, subslice_) \
+ for ((slice_) = 0, (subslice_) = 0; (slice_) < I915_MAX_SLICES; \
+ (subslice_) = ((subslice_) + 1) % I915_MAX_SUBSLICES, \
+ (slice_) += ((subslice_) == 0)) \
+ for_each_if((instdone_has_slice(dev_priv_, sseu_, slice_)) && \
+ (instdone_has_subslice(dev_priv_, sseu_, slice_, \
+ subslice_)))
total: 0 errors, 0 warnings, 5 checks, 679 lines checked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.SPARSE: warning for Refactor to expand subslice mask (rev10)
In reply to Stuart Summers== Series Details ==
== Series Details ==
Series: Refactor to expand subslice mask (rev10)
URL : https://patchwork.freedesktop.org/series/59742/
State : warning
== Summary ==
$ dim sparse origin/drm-tip Sparse version: v0.5.2 Commit: drm/i915: Use local variable for SSEU info in GETPARAM ioctl Okay!
Commit: drm/i915: Add macro for SSEU stride calculation Okay!
Commit: drm/i915: Move calculation of subslices per slice to new function Okay!
Commit: drm/i915: Refactor sseu helper functions
Okay!
Commit: drm/i915: Expand subslice mask +drivers/gpu/drm/i915/i915_drv.c:466:24: warning: expression using sizeof(void)
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for Refactor to expand subslice mask (rev10)
In reply to Stuart Summers== Series Details ==
== Series Details ==
Series: Refactor to expand subslice mask (rev10)
URL : https://patchwork.freedesktop.org/series/59742/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_6141 -> Patchwork_13092
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13092/
Known issues
------------
Here are the changes found in Patchwork_13092 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_suspend@basic-s4-devices:
- fi-blb-e6850: [PASS][1] -> [INCOMPLETE][2] ([fdo#107718])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/fi-blb-e6850/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13092/fi-blb-e6850/igt@[email protected]
* igt@i915_selftest@live_contexts:
- fi-skl-gvtdvm: [PASS][3] -> [DMESG-FAIL][4] ([fdo#110235])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/fi-skl-gvtdvm/igt@i915_selftest@live_contexts.html
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13092/fi-skl-gvtdvm/igt@i915_selftest@live_contexts.html
* igt@i915_selftest@live_evict:
- fi-bsw-kefka: [PASS][5] -> [DMESG-WARN][6] ([fdo#107709])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/fi-bsw-kefka/igt@i915_selftest@live_evict.html
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13092/fi-bsw-kefka/igt@i915_selftest@live_evict.html
#### Possible fixes ####
* igt@i915_pm_rpm@basic-rte:
- fi-skl-6600u: [INCOMPLETE][7] ([fdo#107807]) -> [PASS][8]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/fi-skl-6600u/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13092/fi-skl-6600u/igt@[email protected]
[fdo#107709]: https://bugs.freedesktop.org/show_bug.cgi?id=107709
[fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718
[fdo#107807]: https://bugs.freedesktop.org/show_bug.cgi?id=107807
[fdo#110235]: https://bugs.freedesktop.org/show_bug.cgi?id=110235
Participating hosts (53 -> 42)
------------------------------
Missing (11): fi-kbl-soraka fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-icl-u2 fi-bsw-cyan fi-byt-clapper fi-icl-u3 fi-icl-y fi-icl-dsi fi-bdw-samus
Build changes
-------------
* Linux: CI_DRM_6141 -> Patchwork_13092
CI_DRM_6141: e94845147cc0346c3a9114d5359b188008daff9d @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5015: cdd6b0a7630762cec14596b9863f418b48c32f46 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_13092: 1b9826e9f3ff6cb1d304f43c6a05e4700c02f97c @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
1b9826e9f3ff drm/i915: Expand subslice mask9380b92a1933 drm/i915: Refactor sseu helper functions 3ff1c4ffe466 drm/i915: Move calculation of subslices per slice to new function 1b9931fa807c drm/i915: Add macro for SSEU stride calculation 1d605edfee68 drm/i915: Use local variable for SSEU info in GETPARAM ioctl
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13092/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for Refactor to expand subslice mask (rev10)
In reply to Stuart Summers== Series Details ==
== Series Details ==
Series: Refactor to expand subslice mask (rev10)
URL : https://patchwork.freedesktop.org/series/59742/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_6141_full -> Patchwork_13092_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
Known issues
------------
Here are the changes found in Patchwork_13092_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@i915_pm_rpm@pm-caching:
- shard-skl: [PASS][1] -> [INCOMPLETE][2] ([fdo#107807])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-skl5/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13092/shard-skl8/igt@[email protected]
* igt@i915_pm_rpm@system-suspend-modeset:
- shard-skl: [PASS][3] -> [INCOMPLETE][4] ([fdo#104108] / [fdo#107807])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-skl6/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13092/shard-skl1/igt@[email protected]
* igt@i915_suspend@debugfs-reader:
- shard-apl: [PASS][5] -> [DMESG-WARN][6] ([fdo#108566]) +6 similar issues
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-apl8/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13092/shard-apl8/igt@[email protected]
* igt@kms_atomic_transition@2x-modeset-transitions-nonblocking-fencing:
- shard-glk: [PASS][7] -> [INCOMPLETE][8] ([fdo#103359] / [k.org#198133])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-glk1/igt@kms_atomic_transition@2x-modeset-transitions-nonblocking-fencing.html
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13092/shard-glk6/igt@kms_atomic_transition@2x-modeset-transitions-nonblocking-fencing.html
* igt@kms_plane_alpha_blend@pipe-c-constant-alpha-min:
- shard-skl: [PASS][9] -> [FAIL][10] ([fdo#108145])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-skl4/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13092/shard-skl8/igt@[email protected]
* igt@kms_setmode@basic:
- shard-hsw: [PASS][11] -> [FAIL][12] ([fdo#99912])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-hsw1/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13092/shard-hsw5/igt@[email protected]
#### Possible fixes ####
* igt@debugfs_test@read_all_entries_display_off:
- shard-skl: [INCOMPLETE][13] ([fdo#104108]) -> [PASS][14]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-skl8/igt@debugfs_test@read_all_entries_display_off.html
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13092/shard-skl8/igt@debugfs_test@read_all_entries_display_off.html
* igt@i915_pm_rpm@gem-execbuf-stress:
- shard-skl: [INCOMPLETE][15] ([fdo#107803] / [fdo#107807]) -> [PASS][16]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-skl4/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13092/shard-skl9/igt@[email protected]
* igt@i915_pm_rpm@gem-idle:
- shard-skl: [INCOMPLETE][17] ([fdo#107807]) -> [PASS][18] +1 similar issue
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-skl5/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13092/shard-skl10/igt@[email protected]
* igt@i915_suspend@fence-restore-tiled2untiled:
- shard-apl: [DMESG-WARN][19] ([fdo#108566]) -> [PASS][20] +3 similar issues
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-apl3/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13092/shard-apl8/igt@[email protected]
* igt@kms_cursor_legacy@2x-nonblocking-modeset-vs-cursor-atomic:
- shard-glk: [FAIL][21] ([fdo#106509] / [fdo#107409]) -> [PASS][22]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-glk8/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13092/shard-glk8/igt@[email protected]
* igt@kms_flip@2x-flip-vs-expired-vblank-interruptible:
- shard-hsw: [SKIP][23] ([fdo#109271]) -> [PASS][24] +20 similar issues
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-hsw1/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13092/shard-hsw6/igt@[email protected]
* igt@kms_flip@2x-modeset-vs-vblank-race:
- shard-glk: [FAIL][25] ([fdo#103060]) -> [PASS][26]
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-glk1/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13092/shard-glk6/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-pri-shrfb-draw-mmap-wc:
- shard-skl: [FAIL][27] ([fdo#103167]) -> [PASS][28]
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-skl2/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-pri-shrfb-draw-mmap-wc.html
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13092/shard-skl4/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-pri-shrfb-draw-mmap-wc.html
* igt@kms_plane_alpha_blend@pipe-a-constant-alpha-min:
- shard-skl: [FAIL][29] ([fdo#108145]) -> [PASS][30]
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-skl2/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13092/shard-skl4/igt@[email protected]
* igt@kms_setmode@basic:
- shard-skl: [FAIL][31] ([fdo#99912]) -> [PASS][32]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-skl7/igt@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13092/shard-skl7/igt@[email protected]
[fdo#103060]: https://bugs.freedesktop.org/show_bug.cgi?id=103060
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103359]: https://bugs.freedesktop.org/show_bug.cgi?id=103359
[fdo#104108]: https://bugs.freedesktop.org/show_bug.cgi?id=104108
[fdo#106509]: https://bugs.freedesktop.org/show_bug.cgi?id=106509
[fdo#107409]: https://bugs.freedesktop.org/show_bug.cgi?id=107409
[fdo#107803]: https://bugs.freedesktop.org/show_bug.cgi?id=107803
[fdo#107807]: https://bugs.freedesktop.org/show_bug.cgi?id=107807
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#108566]: https://bugs.freedesktop.org/show_bug.cgi?id=108566
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912
[k.org#198133]: https://bugzilla.kernel.org/show_bug.cgi?id=198133
Participating hosts (10 -> 9)
------------------------------
Missing (1): shard-iclb
Build changes
-------------
* Linux: CI_DRM_6141 -> Patchwork_13092
CI_DRM_6141: e94845147cc0346c3a9114d5359b188008daff9d @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5015: cdd6b0a7630762cec14596b9863f418b48c32f46 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_13092: 1b9826e9f3ff6cb1d304f43c6a05e4700c02f97c @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13092/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Manasi Navare
AppliedPushed to dinq, thanks for the patches and the reviews!
Regards
Manasi
Quoted 27 lines · Stuart Summers
This patch series contains a few code clean-up patches, followed by a patch which changes the storage of the subslice mask to better match the userspace access through the
I915_QUERY_TOPOLOGY_INFOioctl. The index into thesubslice_maskarray is then calculated:
slice * subslice stride + subslice index / 8v2: fix
i915_pm_sseutest failure
v3: no changes to patches in the series, just resending to pick up
in CI correctly
v4: rebase
v5: fix header test
v6: address review comments from Jari
address minor checkpatch warning in existing code useeu_stridefor EU div-by-8
v7: another rebase
v8: address review comments from Tvrtko and Daniele
v9: address review comments from Daniele
v10: add reviewed-by on last patch with minor suggested change,
rebase, and repost for CIStuart Summers (5):
drm/i915: Use local variable for SSEU info in GETPARAM ioctl drm/i915: Add macro for SSEU stride calculation drm/i915: Move calculation of subslices per slice to new function drm/i915: Refactor sseu helper functions
drm/i915: Expand subslice mask
Quoted 21 lines
drivers/gpu/drm/i915/gt/intel_engine_cs.c | 24 ++- drivers/gpu/drm/i915/gt/intel_engine_types.h | 30 ++-- drivers/gpu/drm/i915/gt/intel_hangcheck.c | 3 +- drivers/gpu/drm/i915/gt/intel_sseu.c | 62 +++++++ drivers/gpu/drm/i915/gt/intel_sseu.h | 35 +++- drivers/gpu/drm/i915/gt/intel_workarounds.c | 2 +- drivers/gpu/drm/i915/i915_debugfs.c | 46 ++--- drivers/gpu/drm/i915/i915_drv.c | 15 +- drivers/gpu/drm/i915/i915_gpu_error.c | 5 +- drivers/gpu/drm/i915/i915_query.c | 15 +- drivers/gpu/drm/i915/intel_device_info.c | 176 +++++++++++-------- drivers/gpu/drm/i915/intel_device_info.h | 47 ----- 12 files changed, 280 insertions(+), 180 deletions(-)Signature · 6 lines
2.21.0.5.gaeb582a983 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 1 line · Manasi Navare
Pushed to dinq, thanks for the patches and the reviews!
Thanks for the push Manasi and the reviews Daniele and others!
-Stuart
Quoted 54 lines
Regards
ManasiQuoted 49 lines · Stuart Summers
This patch series contains a few code clean-up patches, followed by a patch which changes the storage of the subslice mask to better match the userspace access through the
I915_QUERY_TOPOLOGY_INFOioctl. The index into thesubslice_maskarray is then calculated:
slice * subslice stride + subslice index / 8v2: fix
i915_pm_sseutest failure
v3: no changes to patches in the series, just resending to pick up
in CI correctly
v4: rebase
v5: fix header test
v6: address review comments from Jari
address minor checkpatch warning in existing code useeu_stridefor EU div-by-8
v7: another rebase
v8: address review comments from Tvrtko and Daniele
v9: address review comments from Daniele
v10: add reviewed-by on last patch with minor suggested change,
rebase, and repost for CIStuart Summers (5):
drm/i915: Use local variable for SSEU info in GETPARAM ioctl drm/i915: Add macro for SSEU stride calculation drm/i915: Move calculation of subslices per slice to new function drm/i915: Refactor sseu helper functions
drm/i915: Expand subslice maskdrivers/gpu/drm/i915/gt/intel_engine_cs.c | 24 ++- drivers/gpu/drm/i915/gt/intel_engine_types.h | 30 ++-- drivers/gpu/drm/i915/gt/intel_hangcheck.c | 3 +- drivers/gpu/drm/i915/gt/intel_sseu.c | 62 +++++++ drivers/gpu/drm/i915/gt/intel_sseu.h | 35 +++- drivers/gpu/drm/i915/gt/intel_workarounds.c | 2 +- drivers/gpu/drm/i915/i915_debugfs.c | 46 ++--- drivers/gpu/drm/i915/i915_drv.c | 15 +- drivers/gpu/drm/i915/i915_gpu_error.c | 5 +- drivers/gpu/drm/i915/i915_query.c | 15 +- drivers/gpu/drm/i915/intel_device_info.c | 176 +++++++++++-- ------ drivers/gpu/drm/i915/intel_device_info.h | 47 ----- 12 files changed, 280 insertions(+), 180 deletions(-)Signature · 6 lines
2.21.0.5.gaeb582a983 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Hi,
Quoted 8 lines
-----Original Message-----
From: Intel-gfx [mailto:[email protected]] On Behalf Of Summers, Stuart
Sent: tiistai 28. toukokuuta 2019 21.33
To: Navare, Manasi D <[email protected]>
Cc: [email protected]
Subject: Re: [Intel-gfx] [CI 0/5] Refactor to expand subslice mask
Quoted 4 lines
Quoted 1 line · Manasi Navare
Pushed to dinq, thanks for the patches and the reviews!
Thanks for the push Manasi and the reviews Daniele and others!
This broke all the ICL systems because CI data was not looked that they did not actually even boot at all. All ICL's in BAT and whole ICL shards.
Quoted 57 lines
-Stuart
Quoted 54 lines
Regards
ManasiQuoted 49 lines · Stuart Summers
This patch series contains a few code clean-up patches, followed by a patch which changes the storage of the subslice mask to better match the userspace access through the
I915_QUERY_TOPOLOGY_INFOioctl. The index into thesubslice_maskarray is then calculated:
slice * subslice stride + subslice index / 8v2: fix
i915_pm_sseutest failure
v3: no changes to patches in the series, just resending to pick up
in CI correctly
v4: rebase
v5: fix header test
v6: address review comments from Jari
address minor checkpatch warning in existing code useeu_stridefor EU div-by-8
v7: another rebase
v8: address review comments from Tvrtko and Daniele
v9: address review comments from Daniele
v10: add reviewed-by on last patch with minor suggested change,
rebase, and repost for CIStuart Summers (5):
drm/i915: Use local variable for SSEU info in GETPARAM ioctl drm/i915: Add macro for SSEU stride calculation drm/i915: Move calculation of subslices per slice to new function drm/i915: Refactor sseu helper functions
drm/i915: Expand subslice maskdrivers/gpu/drm/i915/gt/intel_engine_cs.c | 24 ++- drivers/gpu/drm/i915/gt/intel_engine_types.h | 30 ++-- drivers/gpu/drm/i915/gt/intel_hangcheck.c | 3 +- drivers/gpu/drm/i915/gt/intel_sseu.c | 62 +++++++ drivers/gpu/drm/i915/gt/intel_sseu.h | 35 +++- drivers/gpu/drm/i915/gt/intel_workarounds.c | 2 +- drivers/gpu/drm/i915/i915_debugfs.c | 46 ++--- drivers/gpu/drm/i915/i915_drv.c | 15 +- drivers/gpu/drm/i915/i915_gpu_error.c | 5 +- drivers/gpu/drm/i915/i915_query.c | 15 +- drivers/gpu/drm/i915/intel_device_info.c | 176 +++++++++++-- ------ drivers/gpu/drm/i915/intel_device_info.h | 47 ----- 12 files changed, 280 insertions(+), 180 deletions(-)--
2.21.0.5.gaeb582a983_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [CI,5/5] drm/i915: Expand subslice mask
In reply to Stuart SummersHi Stuart,
Quoted 28 lines · Stuart Summers
Currently, the
subslice_maskruntime parameter is stored as an array of subslices per slice. Expand the subslice mask array to better match what is presented to userspace through theI915_QUERY_TOPOLOGY_INFOioctl. The index into this array is then calculated:
slice * subslice stride + subslice index / 8v2: fix spacing in
set_sseu_infoargs
useset_sseu_infoto initialize sseu data when building device status in debugfs
rename variables inintel_engine_types.hto avoid checkpatch warnings
v3: update headers inintel_sseu.h
v4: add const to somesseu_dev_infovariablesuse sseu->eu_stride for EU stride calculationsv5: address review comments from Tvrtko and Daniele
v6: remove extra space inintel_sseu_get_subslices
return the correct subslice enable infor_each_instdoneaddGEM_BUG_ONto ensure user doesn't pass invalidss_masksize use printk formatted string for subslice mask
v7: removestring.hheader and rebaseCc Daniele Ceraolo Spurio <[email protected]>Cc Lionel Landwerlin <[email protected]>Reviewed-by Daniele Ceraolo Spurio <[email protected]>Signed-off-by Stuart Summers <[email protected]>---
<snip>
Quoted 170 lines
drivers/gpu/drm/i915/intel_device_info.c +33
-45@@ -92,9 +92,9 @@ static void sseu_dump(const struct sseu_dev_info *sseu, struct drm_printer *p) hweight8(sseu->slice_mask), sseu->slice_mask);drm_printf (p,"subslice total: %u\n" ,intel_sseu_subslice_total (sseu));for (s =0 ; s < sseu->max_slices; s++) { -drm_printf (p,"slice%d: %u subslices, mask=%04x\n" , +drm_printf (p,"slice%d: %u subslices, mask=%08x\n" , s,intel_sseu_subslices_per_slice (sseu, s), - sseu->subslice_mask[s]); +intel_sseu_get_subslices (sseu, s)); }drm_printf (p,"EU total: %u\n" , sseu->eu_total);drm_printf (p,"EU per subslice: %u\n" , sseu->eu_per_subslice);@@ -117,10 +117,9 @@ void intel_device_info_dump_runtime(const struct intel_runtime_info *info,static int sseu_eu_idx (const struct sseu_dev_info *sseu,int slice,int subslice) { -int subslice_stride =GEN_SSEU_STRIDE (sseu->max_eus_per_subslice); -int slice_stride = sseu->max_subslices * subslice_stride; +int slice_stride = sseu->max_subslices * sseu->eu_stride; -return slice * slice_stride + subslice * subslice_stride; +return slice * slice_stride + subslice * sseu->eu_stride; } static u16 sseu_get_eus(const struct sseu_dev_info *sseu, int slice,@@ -129,7 +128,7 @@ static u16 sseu_get_eus(const struct sseu_dev_info *sseu, int slice,int i, offset =sseu_eu_idx (sseu, slice, subslice);u16 eu_mask =0 ; -for (i =0 ; i <GEN_SSEU_STRIDE (sseu->max_eus_per_subslice); i++) { +for (i =0 ; i < sseu->eu_stride; i++) { eu_mask |= ((u16 )sseu->eu_mask[offset + i]) << (i *BITS_PER_BYTE ); }@@ -142,7 +141,7 @@ static void sseu_set_eus(struct sseu_dev_info *sseu, int slice, int subslice, {int i, offset =sseu_eu_idx (sseu, slice, subslice); -for (i =0 ; i <GEN_SSEU_STRIDE (sseu->max_eus_per_subslice); i++) { +for (i =0 ; i < sseu->eu_stride; i++) { sseu->eu_mask[offset + i] = (eu_mask >> (BITS_PER_BYTE * i)) &0xff ; }@@ -159,9 +158,9 @@ void intel_device_info_dump_topology(const struct sseu_dev_info *sseu, }for (s =0 ; s < sseu->max_slices; s++) { -drm_printf (p,"slice%d: %u subslice(s) (0x%hhx):\n" , +drm_printf (p,"slice%d: %u subslice(s) (0x%08x):\n" , s,intel_sseu_subslices_per_slice (sseu, s), - sseu->subslice_mask[s]); +intel_sseu_get_subslices (sseu, s));for (ss =0 ; ss < sseu->max_subslices; ss++) {u16 enabled_eus =sseu_get_eus (sseu, s, ss);@@ -190,15 +189,10 @@ static void gen11_sseu_info_init(struct drm_i915_private *dev_priv)u8 eu_en;int s; -if (IS_ELKHARTLAKE (dev_priv)) { - sseu->max_slices =1 ; - sseu->max_subslices =4 ; - sseu->max_eus_per_subslice =8 ; - }else { - sseu->max_slices =1 ; - sseu->max_subslices =8 ; - sseu->max_eus_per_subslice =8 ; - } +if (IS_ELKHARTLAKE (dev_priv)) +intel_sseu_set_info (sseu,1 ,4 ,8 ); +else +intel_sseu_set_info (sseu,1 ,8 ,8 ); s_en =I915_READ (GEN11_GT_SLICE_ENABLE ) &GEN11_GT_S_ENA_MASK ; ss_en = ~I915_READ (GEN11_GT_SUBSLICE_DISABLE );@@ -207,15 +201,15 @@ static void gen11_sseu_info_init(struct drm_i915_private *dev_priv)for (s =0 ; s < sseu->max_slices; s++) {if (s_en &BIT (s)) { -int ss_idx = sseu->max_subslices * s;int ss; sseu->slice_mask |=BIT (s); - sseu->subslice_mask[s] = (ss_en >> ss_idx) & ss_en_mask; -for (ss =0 ; ss < sseu->max_subslices; ss++) { -if (sseu->subslice_mask[s] &BIT (ss)) + +intel_sseu_set_subslices (sseu, s, ss_en_mask); + +for (ss =0 ; ss < sseu->max_subslices; ss++) +if (intel_sseu_has_subslice (sseu, s, ss))sseu_set_eus (sseu, s, ss, eu_en); - } } } sseu->eu_per_subslice =hweight8 (eu_en);@@ -235,23 +229,10 @@ static void gen10_sseu_info_init(struct drm_i915_private *dev_priv)const int eu_mask =0xff ;u32 subslice_mask, eu_en; +intel_sseu_set_info (sseu,6 ,4 ,8 ); + sseu->slice_mask = (fuse2 &GEN10_F2_S_ENA_MASK ) >>GEN10_F2_S_ENA_SHIFT ; - sseu->max_slices =6 ; - sseu->max_subslices =4 ; - sseu->max_eus_per_subslice =8 ; - - subslice_mask = (1 <<4 ) -1 ; - subslice_mask &= ~((fuse2 &GEN10_F2_SS_DIS_MASK ) >> -GEN10_F2_SS_DIS_SHIFT ); - -/* -* Slice0 can have up to 3 subslices, but there are only 2 in -* slice1/2. -*/ - sseu->subslice_mask[0 ] = subslice_mask; -for (s =1 ; s < sseu->max_slices; s++) - sseu->subslice_mask[s] = subslice_mask &0x3 ;/* Slice0 */ eu_en = ~I915_READ (GEN8_EU_DISABLE0 );@@ -276,14 +257,22 @@ static void gen10_sseu_info_init(struct drm_i915_private *dev_priv) eu_en = ~I915_READ (GEN10_EU_DISABLE3 );sseu_set_eus (sseu,5 ,1 , eu_en & eu_mask); -/* Do a second pass where we mark the subslices disabled if all their -* eus are off. -*/ + subslice_mask = (1 <<4 ) -1 ; + subslice_mask &= ~((fuse2 &GEN10_F2_SS_DIS_MASK ) >> +GEN10_F2_SS_DIS_SHIFT ); +for (s =0 ; s < sseu->max_slices; s++) {for (ss =0 ; ss < sseu->max_subslices; ss++) {if (sseu_get_eus (sseu, s, ss) ==0 ) - sseu->subslice_mask[s] &= ~BIT (ss); + subslice_mask &= ~BIT (ss); } + +/* +* Slice0 can have up to 3 subslices, but there are only 2 in +* slice1/2. +*/ +intel_sseu_set_subslices (sseu, s, s ==0 ? subslice_mask : + subslice_mask &0x3 ); } sseu->eu_total =compute_eu_total (sseu);@@ -309,13 +298,12 @@ static void cherryview_sseu_info_init(struct drm_i915_private *dev_priv) {struct sseu_dev_info *sseu = &RUNTIME_INFO (dev_priv)->sseu;u32 fuse; +u8 subslice_mask; fuse =I915_READ (CHV_FUSE_GT ); sseu->slice_mask =BIT (0 ); - sseu->max_slices =1 ; - sseu->max_subslices =2 ; - sseu->max_eus_per_subslice =8 ; +intel_sseu_set_info (sseu,1 ,2 ,8 );if (!(fuse &CHV_FGT_DISABLE_SS0 )) { u8 disabled_mask =
drivers/gpu/drm/i915/intel_device_info.c static void cherryview_sseu_info_init(struct drm_i915_private *dev_priv) · line 315
Quoted 5 lines
drivers/gpu/drm/i915/intel_device_info.c +1
-1@@ -324,7 +312,7 @@ static void cherryview_sseu_info_init(struct drm_i915_private *dev_priv) (((fuse &CHV_FGT_EU_DIS_SS0_R1_MASK ) >>CHV_FGT_EU_DIS_SS0_R1_SHIFT ) <<4 ); - sseu->subslice_mask[0 ] |=BIT (0 ); + subslice_mask |=BIT (0 );
When building with -Wuninitialized, clang warns:
drivers/gpu/drm/i915/intel_device_info.c:315:3: warning: variable 'subslice_mask' is uninitialized when used here [-Wuninitialized]
subslice_mask |= BIT(0);
^~~~~~~~~~~~~
drivers/gpu/drm/i915/intel_device_info.c:301:18: note: initialize the variable 'subslice_mask' to silence this warning
u8 subslice_mask;
^
= '\0'I assume that it should be initialized to zero but maybe you intended something different?
Thanks,
Nathan
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 10 lines · Jani
Hi,
Quoted 8 lines
-----Original Message-----
From: Intel-gfx [mailto:[email protected]] On Behalf Of Summers, Stuart
Sent: tiistai 28. toukokuuta 2019 21.33
To: Navare, Manasi D <[email protected]>
Cc: [email protected]
Subject: Re: [Intel-gfx] [CI 0/5] Refactor to expand subslice mask
Quoted 7 lines
Quoted 4 lines · Manasi Navare
Quoted 1 line
Pushed to dinq, thanks for the patches and the reviews!
Thanks for the push Manasi and the reviews Daniele and others!
This broke all the ICL systems because CI data was not looked that they did not actually even boot at all. All ICL's in BAT and whole ICL shards.
Can we change the CI reply for the case where there are extra missing machines compared to the reference run from SUCCESS to WARNING or something like that, so people have a clearer indication that something might have gone wrong?
Daniele
Quoted 54 lines
Quoted 54 lines
-Stuart
Quoted 50 lines
Regards
ManasiQuoted 45 lines · Stuart Summers
This patch series contains a few code clean-up patches, followed by a patch which changes the storage of the subslice mask to better match the userspace access through the
I915_QUERY_TOPOLOGY_INFOioctl. The index into thesubslice_maskarray is then calculated:
slice * subslice stride + subslice index / 8v2: fix
i915_pm_sseutest failure
v3: no changes to patches in the series, just resending to pick up
in CI correctly
v4: rebase
v5: fix header test
v6: address review comments from Jari
address minor checkpatch warning in existing code useeu_stridefor EU div-by-8
v7: another rebase
v8: address review comments from Tvrtko and Daniele
v9: address review comments from Daniele
v10: add reviewed-by on last patch with minor suggested change,
rebase, and repost for CIStuart Summers (5):
drm/i915: Use local variable for SSEU info in GETPARAM ioctl drm/i915: Add macro for SSEU stride calculation drm/i915: Move calculation of subslices per slice to new function drm/i915: Refactor sseu helper functions
drm/i915: Expand subslice maskdrivers/gpu/drm/i915/gt/intel_engine_cs.c | 24 ++- drivers/gpu/drm/i915/gt/intel_engine_types.h | 30 ++-- drivers/gpu/drm/i915/gt/intel_hangcheck.c | 3 +- drivers/gpu/drm/i915/gt/intel_sseu.c | 62 +++++++ drivers/gpu/drm/i915/gt/intel_sseu.h | 35 +++- drivers/gpu/drm/i915/gt/intel_workarounds.c | 2 +- drivers/gpu/drm/i915/i915_debugfs.c | 46 ++--- drivers/gpu/drm/i915/i915_drv.c | 15 +- drivers/gpu/drm/i915/i915_gpu_error.c | 5 +- drivers/gpu/drm/i915/i915_query.c | 15 +- drivers/gpu/drm/i915/intel_device_info.c | 176 +++++++++++-- ------ drivers/gpu/drm/i915/intel_device_info.h | 47 ----- 12 files changed, 280 insertions(+), 180 deletions(-)--
2.21.0.5.gaeb582a983
Quoted 9 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Jani Nikula
maintainerQuoted 10 lines · Jani
Hi,
Quoted 8 lines
-----Original Message-----
From: Intel-gfx [mailto:[email protected]] On Behalf Of Summers, Stuart
Sent: tiistai 28. toukokuuta 2019 21.33
To: Navare, Manasi D <[email protected]>
Cc: [email protected]
Subject: Re: [Intel-gfx] [CI 0/5] Refactor to expand subslice mask
Quoted 6 lines
Quoted 4 lines · Manasi Navare
Quoted 1 line
Pushed to dinq, thanks for the patches and the reviews!
Thanks for the push Manasi and the reviews Daniele and others!
This broke all the ICL systems because CI data was not looked that they did not actually even boot at all. All ICL's in BAT and whole ICL shards.
Commit 1ac159e23c2c ("drm/i915: Expand subslice mask") has now been reverted and we can carry on.
As discussed, I don't really expect people to dig into the logs after seeing "Fi.CI.IGT: success". For one I didn't expect patches to be able to take down machines with just a fairly silent "Participating hosts (10 -> 9)" message. But that discussion is for another forum, another time.
BR,
Jani.
Quoted 63 lines
Quoted 59 lines
-Stuart
Quoted 54 lines
Regards
ManasiQuoted 49 lines · Stuart Summers
This patch series contains a few code clean-up patches, followed by a patch which changes the storage of the subslice mask to better match the userspace access through the
I915_QUERY_TOPOLOGY_INFOioctl. The index into thesubslice_maskarray is then calculated:
slice * subslice stride + subslice index / 8v2: fix
i915_pm_sseutest failure
v3: no changes to patches in the series, just resending to pick up
in CI correctly
v4: rebase
v5: fix header test
v6: address review comments from Jari
address minor checkpatch warning in existing code useeu_stridefor EU div-by-8
v7: another rebase
v8: address review comments from Tvrtko and Daniele
v9: address review comments from Daniele
v10: add reviewed-by on last patch with minor suggested change,
rebase, and repost for CIStuart Summers (5):
drm/i915: Use local variable for SSEU info in GETPARAM ioctl drm/i915: Add macro for SSEU stride calculation drm/i915: Move calculation of subslices per slice to new function drm/i915: Refactor sseu helper functions
drm/i915: Expand subslice maskdrivers/gpu/drm/i915/gt/intel_engine_cs.c | 24 ++- drivers/gpu/drm/i915/gt/intel_engine_types.h | 30 ++-- drivers/gpu/drm/i915/gt/intel_hangcheck.c | 3 +- drivers/gpu/drm/i915/gt/intel_sseu.c | 62 +++++++ drivers/gpu/drm/i915/gt/intel_sseu.h | 35 +++- drivers/gpu/drm/i915/gt/intel_workarounds.c | 2 +- drivers/gpu/drm/i915/i915_debugfs.c | 46 ++--- drivers/gpu/drm/i915/i915_drv.c | 15 +- drivers/gpu/drm/i915/i915_gpu_error.c | 5 +- drivers/gpu/drm/i915/i915_query.c | 15 +- drivers/gpu/drm/i915/intel_device_info.c | 176 +++++++++++-- ------ drivers/gpu/drm/i915/intel_device_info.h | 47 ----- 12 files changed, 280 insertions(+), 180 deletions(-)--
2.21.0.5.gaeb582a983_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 5 lines
Jani Nikula, Intel Open Source Graphics Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Jani Nikula
maintainerRe: [CI,5/5] drm/i915: Expand subslice mask
In reply to Nathan ChancellorQuoted 220 lines · Nathan Chancellor
Hi Stuart,
Quoted 28 lines · Stuart Summers
Currently, the
subslice_maskruntime parameter is stored as an array of subslices per slice. Expand the subslice mask array to better match what is presented to userspace through theI915_QUERY_TOPOLOGY_INFOioctl. The index into this array is then calculated:
slice * subslice stride + subslice index / 8v2: fix spacing in
set_sseu_infoargs
useset_sseu_infoto initialize sseu data when building device status in debugfs
rename variables inintel_engine_types.hto avoid checkpatch warnings
v3: update headers inintel_sseu.h
v4: add const to somesseu_dev_infovariablesuse sseu->eu_stride for EU stride calculationsv5: address review comments from Tvrtko and Daniele
v6: remove extra space inintel_sseu_get_subslices
return the correct subslice enable infor_each_instdoneaddGEM_BUG_ONto ensure user doesn't pass invalidss_masksize use printk formatted string for subslice mask
v7: removestring.hheader and rebaseCc Daniele Ceraolo Spurio <[email protected]>Cc Lionel Landwerlin <[email protected]>Reviewed-by Daniele Ceraolo Spurio <[email protected]>Signed-off-by Stuart Summers <[email protected]>---
<snip>
Quoted 170 lines
drivers/gpu/drm/i915/intel_device_info.c +33
-45@@ -92,9 +92,9 @@ static void sseu_dump(const struct sseu_dev_info *sseu, struct drm_printer *p) hweight8(sseu->slice_mask), sseu->slice_mask);drm_printf (p,"subslice total: %u\n" ,intel_sseu_subslice_total (sseu));for (s =0 ; s < sseu->max_slices; s++) { -drm_printf (p,"slice%d: %u subslices, mask=%04x\n" , +drm_printf (p,"slice%d: %u subslices, mask=%08x\n" , s,intel_sseu_subslices_per_slice (sseu, s), - sseu->subslice_mask[s]); +intel_sseu_get_subslices (sseu, s)); }drm_printf (p,"EU total: %u\n" , sseu->eu_total);drm_printf (p,"EU per subslice: %u\n" , sseu->eu_per_subslice);@@ -117,10 +117,9 @@ void intel_device_info_dump_runtime(const struct intel_runtime_info *info,static int sseu_eu_idx (const struct sseu_dev_info *sseu,int slice,int subslice) { -int subslice_stride =GEN_SSEU_STRIDE (sseu->max_eus_per_subslice); -int slice_stride = sseu->max_subslices * subslice_stride; +int slice_stride = sseu->max_subslices * sseu->eu_stride; -return slice * slice_stride + subslice * subslice_stride; +return slice * slice_stride + subslice * sseu->eu_stride; } static u16 sseu_get_eus(const struct sseu_dev_info *sseu, int slice,@@ -129,7 +128,7 @@ static u16 sseu_get_eus(const struct sseu_dev_info *sseu, int slice,int i, offset =sseu_eu_idx (sseu, slice, subslice);u16 eu_mask =0 ; -for (i =0 ; i <GEN_SSEU_STRIDE (sseu->max_eus_per_subslice); i++) { +for (i =0 ; i < sseu->eu_stride; i++) { eu_mask |= ((u16 )sseu->eu_mask[offset + i]) << (i *BITS_PER_BYTE ); }@@ -142,7 +141,7 @@ static void sseu_set_eus(struct sseu_dev_info *sseu, int slice, int subslice, {int i, offset =sseu_eu_idx (sseu, slice, subslice); -for (i =0 ; i <GEN_SSEU_STRIDE (sseu->max_eus_per_subslice); i++) { +for (i =0 ; i < sseu->eu_stride; i++) { sseu->eu_mask[offset + i] = (eu_mask >> (BITS_PER_BYTE * i)) &0xff ; }@@ -159,9 +158,9 @@ void intel_device_info_dump_topology(const struct sseu_dev_info *sseu, }for (s =0 ; s < sseu->max_slices; s++) { -drm_printf (p,"slice%d: %u subslice(s) (0x%hhx):\n" , +drm_printf (p,"slice%d: %u subslice(s) (0x%08x):\n" , s,intel_sseu_subslices_per_slice (sseu, s), - sseu->subslice_mask[s]); +intel_sseu_get_subslices (sseu, s));for (ss =0 ; ss < sseu->max_subslices; ss++) {u16 enabled_eus =sseu_get_eus (sseu, s, ss);@@ -190,15 +189,10 @@ static void gen11_sseu_info_init(struct drm_i915_private *dev_priv)u8 eu_en;int s; -if (IS_ELKHARTLAKE (dev_priv)) { - sseu->max_slices =1 ; - sseu->max_subslices =4 ; - sseu->max_eus_per_subslice =8 ; - }else { - sseu->max_slices =1 ; - sseu->max_subslices =8 ; - sseu->max_eus_per_subslice =8 ; - } +if (IS_ELKHARTLAKE (dev_priv)) +intel_sseu_set_info (sseu,1 ,4 ,8 ); +else +intel_sseu_set_info (sseu,1 ,8 ,8 ); s_en =I915_READ (GEN11_GT_SLICE_ENABLE ) &GEN11_GT_S_ENA_MASK ; ss_en = ~I915_READ (GEN11_GT_SUBSLICE_DISABLE );@@ -207,15 +201,15 @@ static void gen11_sseu_info_init(struct drm_i915_private *dev_priv)for (s =0 ; s < sseu->max_slices; s++) {if (s_en &BIT (s)) { -int ss_idx = sseu->max_subslices * s;int ss; sseu->slice_mask |=BIT (s); - sseu->subslice_mask[s] = (ss_en >> ss_idx) & ss_en_mask; -for (ss =0 ; ss < sseu->max_subslices; ss++) { -if (sseu->subslice_mask[s] &BIT (ss)) + +intel_sseu_set_subslices (sseu, s, ss_en_mask); + +for (ss =0 ; ss < sseu->max_subslices; ss++) +if (intel_sseu_has_subslice (sseu, s, ss))sseu_set_eus (sseu, s, ss, eu_en); - } } } sseu->eu_per_subslice =hweight8 (eu_en);@@ -235,23 +229,10 @@ static void gen10_sseu_info_init(struct drm_i915_private *dev_priv)const int eu_mask =0xff ;u32 subslice_mask, eu_en; +intel_sseu_set_info (sseu,6 ,4 ,8 ); + sseu->slice_mask = (fuse2 &GEN10_F2_S_ENA_MASK ) >>GEN10_F2_S_ENA_SHIFT ; - sseu->max_slices =6 ; - sseu->max_subslices =4 ; - sseu->max_eus_per_subslice =8 ; - - subslice_mask = (1 <<4 ) -1 ; - subslice_mask &= ~((fuse2 &GEN10_F2_SS_DIS_MASK ) >> -GEN10_F2_SS_DIS_SHIFT ); - -/* -* Slice0 can have up to 3 subslices, but there are only 2 in -* slice1/2. -*/ - sseu->subslice_mask[0 ] = subslice_mask; -for (s =1 ; s < sseu->max_slices; s++) - sseu->subslice_mask[s] = subslice_mask &0x3 ;/* Slice0 */ eu_en = ~I915_READ (GEN8_EU_DISABLE0 );@@ -276,14 +257,22 @@ static void gen10_sseu_info_init(struct drm_i915_private *dev_priv) eu_en = ~I915_READ (GEN10_EU_DISABLE3 );sseu_set_eus (sseu,5 ,1 , eu_en & eu_mask); -/* Do a second pass where we mark the subslices disabled if all their -* eus are off. -*/ + subslice_mask = (1 <<4 ) -1 ; + subslice_mask &= ~((fuse2 &GEN10_F2_SS_DIS_MASK ) >> +GEN10_F2_SS_DIS_SHIFT ); +for (s =0 ; s < sseu->max_slices; s++) {for (ss =0 ; ss < sseu->max_subslices; ss++) {if (sseu_get_eus (sseu, s, ss) ==0 ) - sseu->subslice_mask[s] &= ~BIT (ss); + subslice_mask &= ~BIT (ss); } + +/* +* Slice0 can have up to 3 subslices, but there are only 2 in +* slice1/2. +*/ +intel_sseu_set_subslices (sseu, s, s ==0 ? subslice_mask : + subslice_mask &0x3 ); } sseu->eu_total =compute_eu_total (sseu);@@ -309,13 +298,12 @@ static void cherryview_sseu_info_init(struct drm_i915_private *dev_priv) {struct sseu_dev_info *sseu = &RUNTIME_INFO (dev_priv)->sseu;u32 fuse; +u8 subslice_mask; fuse =I915_READ (CHV_FUSE_GT ); sseu->slice_mask =BIT (0 ); - sseu->max_slices =1 ; - sseu->max_subslices =2 ; - sseu->max_eus_per_subslice =8 ; +intel_sseu_set_info (sseu,1 ,2 ,8 );if (!(fuse &CHV_FGT_DISABLE_SS0 )) { u8 disabled_mask =drivers/gpu/drm/i915/intel_device_info.c static void cherryview_sseu_info_init(struct drm_i915_private *dev_priv) · line 315
Quoted 5 lines
drivers/gpu/drm/i915/intel_device_info.c +1
-1@@ -324,7 +312,7 @@ static void cherryview_sseu_info_init(struct drm_i915_private *dev_priv) (((fuse &CHV_FGT_EU_DIS_SS0_R1_MASK ) >>CHV_FGT_EU_DIS_SS0_R1_SHIFT ) <<4 ); - sseu->subslice_mask[0 ] |=BIT (0 ); + subslice_mask |=BIT (0 );When building with -Wuninitialized, clang warns:
drivers/gpu/drm/i915/intel_device_info.c:315:3: warning: variable 'subslice_mask' is uninitialized when used here [-Wuninitialized]subslice_mask |= BIT(0); ^~~~~~~~~~~~~ drivers/gpu/drm/i915/intel_device_info.c:301:18: note: initialize the variable 'subslice_mask' to silence this warning u8 subslice_mask; ^ = '\0'
Quoted 2 lines
I assume that it should be initialized to zero but maybe you intended something different?
As it happens, the commit has been reverted for other reasons, and we (the royal we, I really mean Stuart) can fix this while at it. ;)
BR,
Jani.
Signature · 5 lines
Jani Nikula, Intel Open Source Graphics Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Jani Nikula
maintainerRe: [CI 5/5] drm/i915: Expand subslice mask
In reply to Stuart SummersQuoted 22 lines · Stuart Summers
Currently, the
subslice_maskruntime parameter is stored as an array of subslices per slice. Expand the subslice mask array to better match what is presented to userspace through theI915_QUERY_TOPOLOGY_INFOioctl. The index into this array is then calculated:
slice * subslice stride + subslice index / 8v2: fix spacing in
set_sseu_infoargs
useset_sseu_infoto initialize sseu data when building device status in debugfs
rename variables inintel_engine_types.hto avoid checkpatch warnings
v3: update headers inintel_sseu.h
v4: add const to somesseu_dev_infovariablesuse sseu->eu_stride for EU stride calculationsv5: address review comments from Tvrtko and Daniele
v6: remove extra space inintel_sseu_get_subslices
return the correct subslice enable infor_each_instdoneaddGEM_BUG_ONto ensure user doesn't pass invalidss_masksize use printk formatted string for subslice mask
v7: removestring.hheader and rebase
Quoted 5 lines
Cc Daniele Ceraolo Spurio <[email protected]>Cc Lionel Landwerlin <[email protected]>Reviewed-by Daniele Ceraolo Spurio <[email protected]>Signed-off-by Stuart Summers <[email protected]>
As this patch uncovered a latent issue in 1e40d4aea57b ("drm/i915/cnl:
Implement WaProgramMgsrForCorrectSliceSpecificMmioReads") and got reverted, I'll take the opportunity to comment. I acknowledge the revert is shooting the messenger a bit, and this will smell like maintainer bikeshedding.
Now, the first reaction looking at the commit was, it does not fare well on the "if a bisect landed on this commit, how happy would I be" scale.
While it's mostly refactoring, it could be chopped up to several logical and obvious steps. For example, add intel_sseu_set_info() first with no other changes. Add ss_stride and eu_stride to struct sseu_dev_info separately. Add intel_sseu_get_subslices() but don't expand yet, make it just sseu->subslice_mask[s] first. And so on, you get the idea, a series of small non-functional changes followed by patches with functional changes that stand out. Indeed patches 1-4 did this fine.
It's easy on the reviewer, it's easy on whoever git blames years down the line. Trust me, we will.
And it would be the commit adding intel_sseu_get_subslices(), or the one adding the GEM_BUG_ON()s into it, that would blow up 1e40d4aea57b ("drm/i915/cnl: Implement WaProgramMgsrForCorrectSliceSpecificMmioReads").
One more note below.
drivers/gpu/drm/i915/i915_drv.c static int i915_getparam_ioctl(struct drm_device *dev, void *data, · line 466
Quoted 8 lines
drivers/gpu/drm/i915/i915_drv.c +3
-1@@ -461,7 +461,9 @@ static int i915_getparam_ioctl(struct drm_device *dev, void *data,return -ENODEV ;break ;case I915_PARAM_SUBSLICE_MASK : - value = sseu->subslice_mask[0 ]; +/* Only copy bits from the first slice */ +memcpy (&value, sseu->subslice_mask, +min (sseu->ss_stride, (u8 )sizeof (value)));
Frankly I'd rather see this written in self-evident code without the comment.
BR,
Jani.
Signature · 5 lines
Jani Nikula, Intel Open Source Graphics Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [CI,5/5] drm/i915: Expand subslice mask
In reply to Jani NikulaQuoted 251 lines · Jani Nikula
Quoted 249 lines · Nathan Chancellor
Hi Stuart,
Quoted 30 lines · Stuart Summers
Currently, the
subslice_maskruntime parameter is stored as an array of subslices per slice. Expand the subslice mask array to better match what is presented to userspace through theI915_QUERY_TOPOLOGY_INFOioctl. The index into this array is then calculated:
slice * subslice stride + subslice index / 8v2: fix spacing in
set_sseu_infoargs
useset_sseu_infoto initialize sseu data when building device status in debugfs
rename variables inintel_engine_types.hto avoid checkpatch warnings
v3: update headers inintel_sseu.h
v4: add const to somesseu_dev_infovariablesuse sseu->eu_stride for EU stride calculationsv5: address review comments from Tvrtko and Daniele
v6: remove extra space inintel_sseu_get_subslices
return the correct subslice enable infor_each_instdoneaddGEM_BUG_ONto ensure user doesn't pass invalidss_mask
size
use printk formatted string for subslice mask
v7: removestring.hheader and rebaseCc Daniele Ceraolo Spurio <[email protected]>Cc Lionel Landwerlin <[email protected]>Reviewed-by Daniele Ceraolo Spurio <Signed-off-by Stuart Summers <[email protected]>---
<snip>
Quoted 194 lines
drivers/gpu/drm/i915/intel_device_info.c +2
-2@@ -92,9 +92,9 @@ static void sseu_dump(const struct sseu_dev_info *sseu, struct drm_printer *p) hweight8(sseu->slice_mask), sseu->slice_mask);drm_printf (p,"subslice total: %u\n" ,intel_sseu_subslice_total (sseu));for (s =0 ; s < sseu->max_slices; s++) { -drm_printf (p,"slice%d: %u subslices, mask=%04x\n" , +drm_printf (p,"slice%d: %u subslices, mask=%08x\n" , s,intel_sseu_subslices_per_slice (sseu, s), - sseu->subslice_mask[s]); +intel_sseu_get_subslices (sseu, s)); }drivers/gpu/drm/i915/intel_device_info.c +2
-3drm_printf (p,"EU total: %u\n" , sseu->eu_total);drm_printf (p,"EU per subslice: %u\n" , sseu->eu_per_subslice);@@ -117,10 +117,9 @@ void intel_device_info_dump_runtime(conststruct intel_runtime_info *info, static int sseu_eu_idx(const struct sseu_dev_info *sseu, int slice, int subslice) { - int subslice_stride = GEN_SSEU_STRIDE(sseu- >max_eus_per_subslice); -int slice_stride = sseu->max_subslices * subslice_stride; +int slice_stride = sseu->max_subslices * sseu->eu_stride; -return slice * slice_stride + subslice * subslice_stride; +return slice * slice_stride + subslice * sseu->eu_stride;}
static u16 sseu_get_eus(const struct
sseu_dev_info*sseu, int
slice,drivers/gpu/drm/i915/intel_device_info.c +1
-1@@ -129,7 +128,7 @@ static u16 sseu_get_eus(const struct sseu_dev_info *sseu, int slice, int i, offset = sseu_eu_idx(sseu, slice, subslice);u16 eu_mask =0 ; -for (i =0 ; i <GEN_SSEU_STRIDE (sseu->max_eus_per_subslice); i++) { +for (i =0 ; i < sseu->eu_stride; i++) { eu_mask |= ((u16)sseu->eu_mask[offset + i]) <<drivers/gpu/drm/i915/intel_device_info.c +1
-1(i *BITS_PER_BYTE ); }@@ -142,7 +141,7 @@ static void sseu_set_eus(struct sseu_dev_info *sseu, int slice, int subslice, {int i, offset =sseu_eu_idx (sseu, slice, subslice); -for (i =0 ; i <GEN_SSEU_STRIDE (sseu->max_eus_per_subslice); i++) { +for (i =0 ; i < sseu->eu_stride; i++) { sseu->eu_mask[offset + i] =drivers/gpu/drm/i915/intel_device_info.c +2
-2(eu_mask >> (BITS_PER_BYTE * i)) &0xff ; }@@ -159,9 +158,9 @@ void intel_device_info_dump_topology(const struct sseu_dev_info *sseu, }for (s =0 ; s < sseu->max_slices; s++) { -drm_printf (p,"slice%d: %u subslice(s) (0x%hhx):\n" , +drm_printf (p,"slice%d: %u subslice(s) (0x%08x):\n" , s,intel_sseu_subslices_per_slice (sseu, s), - sseu->subslice_mask[s]); +intel_sseu_get_subslices (sseu, s));for (ss =0 ; ss < sseu->max_subslices; ss++) {drivers/gpu/drm/i915/intel_device_info.c +4
-9u16 enabled_eus =sseu_get_eus (sseu, s, ss);@@ -190,15 +189,10 @@ static void gen11_sseu_info_init(struct drm_i915_private *dev_priv) u8 eu_en;int s; -if (IS_ELKHARTLAKE (dev_priv)) { - sseu->max_slices =1 ; - sseu->max_subslices =4 ; - sseu->max_eus_per_subslice =8 ; - }else { - sseu->max_slices =1 ; - sseu->max_subslices =8 ; - sseu->max_eus_per_subslice =8 ; - } +if (IS_ELKHARTLAKE (dev_priv)) +intel_sseu_set_info (sseu,1 ,4 ,8 ); +else +intel_sseu_set_info (sseu,1 ,8 ,8 ); s_en =I915_READ (GEN11_GT_SLICE_ENABLE ) &GEN11_GT_S_ENA_MASK ;drivers/gpu/drm/i915/intel_device_info.c +5
-4ss_en = ~I915_READ (GEN11_GT_SUBSLICE_DISABLE );@@ -207,15 +201,15 @@ static void gen11_sseu_info_init(struct drm_i915_private *dev_priv)for (s =0 ; s < sseu->max_slices; s++) {if (s_en &BIT (s)) { -int ss_idx = sseu->max_subslices * s;int ss; sseu->slice_mask |=BIT (s); - sseu->subslice_mask[s] = (ss_en >> ss_idx) & ss_en_mask; -for (ss =0 ; ss < sseu->max_subslices; ss++) { -if (sseu->subslice_mask[s] &BIT (ss)) + +intel_sseu_set_subslices (sseu, s, ss_en_mask); + +for (ss =0 ; ss < sseu->max_subslices; ss++) +if (intel_sseu_has_subslice (sseu, s, ss)) sseu_set_eus(sseu, s, ss,
eu_en);drivers/gpu/drm/i915/intel_device_info.c +2
-16- } } } sseu->eu_per_subslice =hweight8 (eu_en);@@ -235,23 +229,10 @@ static void gen10_sseu_info_init(struct drm_i915_private *dev_priv)const int eu_mask =0xff ;u32 subslice_mask, eu_en; +intel_sseu_set_info (sseu,6 ,4 ,8 ); + sseu->slice_mask = (fuse2 &GEN10_F2_S_ENA_MASK ) >>GEN10_F2_S_ENA_SHIFT ; - sseu->max_slices =6 ; - sseu->max_subslices =4 ; - sseu->max_eus_per_subslice =8 ; - - subslice_mask = (1 <<4 ) -1 ; - subslice_mask &= ~((fuse2 &GEN10_F2_SS_DIS_MASK ) >> -GEN10_F2_SS_DIS_SHIFT ); - -/* -* Slice0 can have up to 3 subslices, but there are only 2 in -* slice1/2. -*/ - sseu->subslice_mask[0 ] = subslice_mask; -for (s =1 ; s < sseu->max_slices; s++) - sseu->subslice_mask[s] = subslice_mask &0x3 ;/* Slice0 */ drivers/gpu/drm/i915/intel_device_info.c +0
-1eu_en = ~I915_READ (GEN8_EU_DISABLE0 );@@ -276,14 +257,22 @@ static void gen10_sseu_info_init(struct drm_i915_private *dev_priv) eu_en = ~I915_READ (GEN10_EU_DISABLE3 );sseu_set_eus (sseu,5 ,1 , eu_en & eu_mask); -/* Do a second pass where we mark the subslices disabled if all their
drivers/gpu/drm/i915/intel_device_info.c +8
-3-* eus are off. -*/ + subslice_mask = (1 <<4 ) -1 ; + subslice_mask &= ~((fuse2 &GEN10_F2_SS_DIS_MASK ) >> +GEN10_F2_SS_DIS_SHIFT ); +for (s =0 ; s < sseu->max_slices; s++) {for (ss =0 ; ss < sseu->max_subslices; ss++) {if (sseu_get_eus (sseu, s, ss) ==0 ) - sseu->subslice_mask[s] &= ~BIT (ss); + subslice_mask &= ~BIT (ss); } + +/* +* Slice0 can have up to 3 subslices, but there are only 2 in
drivers/gpu/drm/i915/intel_device_info.c +3
-0+* slice1/2. +*/ + intel_sseu_set_subslices(sseu, s, s == 0 ?
subslice_mask:drivers/gpu/drm/i915/intel_device_info.c +1
-0+ subslice_mask &
0x3);drivers/gpu/drm/i915/intel_device_info.c +2
-3} sseu->eu_total =compute_eu_total (sseu);@@ -309,13 +298,12 @@ static void cherryview_sseu_info_init(struct drm_i915_private *dev_priv) {struct sseu_dev_info *sseu = &RUNTIME_INFO (dev_priv)->sseu;u32 fuse; +u8 subslice_mask; fuse =I915_READ (CHV_FUSE_GT ); sseu->slice_mask =BIT (0 ); - sseu->max_slices =1 ; - sseu->max_subslices =2 ; - sseu->max_eus_per_subslice =8 ; +intel_sseu_set_info (sseu,1 ,2 ,8 );if (!(fuse &CHV_FGT_DISABLE_SS0 )) {drivers/gpu/drm/i915/intel_device_info.c +0
-0u8 disabled_mask =drivers/gpu/drm/i915/intel_device_info.c static void cherryview_sseu_info_init(struct · line 316
Quoted 6 lines
drivers/gpu/drm/i915/intel_device_info.c +1
-1@@ -324,7 +312,7 @@ static void cherryview_sseu_info_init(struct drm_i915_private *dev_priv) (((fuse & CHV_FGT_EU_DIS_SS0_R1_MASK) >> CHV_FGT_EU_DIS_SS0_R1_SHIFT) << 4); - sseu->subslice_mask[0 ] |=BIT (0 ); + subslice_mask |=BIT (0 );When building with -Wuninitialized, clang warns:
drivers/gpu/drm/i915/intel_device_info.c:315:3: warning: variable 'subslice_mask' is uninitialized when used here [-Wuninitialized]subslice_mask |= BIT(0); ^~~~~~~~~~~~~ drivers/gpu/drm/i915/intel_device_info.c:301:18: note: initialize the variable 'subslice_mask' to silence this warning u8 subslice_mask; ^ = '\0'
Quoted 6 lines
Quoted 3 lines
I assume that it should be initialized to zero but maybe you intended
something different?As it happens, the commit has been reverted for other reasons, and we (the royal we, I really mean Stuart) can fix this while at it. ;)
I'll accept the royal 'we' descriptor in this instance and address the issue. Thanks for the comment!
-Stuart
Quoted 5 lines
BR,
Jani.
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [CI 5/5] drm/i915: Expand subslice mask
In reply to Jani NikulaQuoted 30 lines · Jani Nikula
Quoted 22 lines · Stuart Summers
Currently, the
subslice_maskruntime parameter is stored as an array of subslices per slice. Expand the subslice mask array to better match what is presented to userspace through theI915_QUERY_TOPOLOGY_INFOioctl. The index into this array is then calculated:
slice * subslice stride + subslice index / 8v2: fix spacing in
set_sseu_infoargs
useset_sseu_infoto initialize sseu data when building device status in debugfs
rename variables inintel_engine_types.hto avoid checkpatch warnings
v3: update headers inintel_sseu.h
v4: add const to somesseu_dev_infovariablesuse sseu->eu_stride for EU stride calculationsv5: address review comments from Tvrtko and Daniele
v6: remove extra space inintel_sseu_get_subslices
return the correct subslice enable infor_each_instdoneaddGEM_BUG_ONto ensure user doesn't pass invalidss_masksize use printk formatted string for subslice mask
v7: removestring.hheader and rebaseQuoted 6 lines
Cc Daniele Ceraolo Spurio <[email protected]>Cc Lionel Landwerlin <[email protected]>Reviewed-by Daniele Ceraolo Spurio <Signed-off-by Stuart Summers <[email protected]>
Quoted 7 lines
As this patch uncovered a latent issue in
1e40d4aea57b("drm/i915/cnl:
Implement WaProgramMgsrForCorrectSliceSpecificMmioReads") and got reverted, I'll take the opportunity to comment. I acknowledge the revert
is shooting the messenger a bit, and this will smell like maintainer bikeshedding.
I have no problem reworking regressions my series caused :) I just wasn't aware there was an issue when merging.
Quoted 6 lines
Now, the first reaction looking at the commit was, it does not fare well
on the "if a bisect landed on this commit, how happy would I be" scale.
Quoted 11 lines
While it's mostly refactoring, it could be chopped up to several logical
and obvious steps. For example, addintel_sseu_set_info()first with no
other changes. Addss_strideandeu_strideto structsseu_dev_infoseparately. Addintel_sseu_get_subslices()but don't expand yet, make it
just sseu->subslice_mask[s] first. And so on, you get the idea, a series
of small non-functional changes followed by patches with functional changes that stand out. Indeed patches 1-4 did this fine.
This is good general feedback, thanks. I'll split this up when reposting.
Quoted 12 lines
It's easy on the reviewer, it's easy on whoever git blames years down the line. Trust me, we will.
And it would be the commit adding
intel_sseu_get_subslices(), or the one
adding the GEM_BUG_ON()s into it, that would blow up1e40d4aea57b("drm/i915/cnl: Implement WaProgramMgsrForCorrectSliceSpecificMmioReads").One more note below.
Quoted 12 lines
drivers/gpu/drm/i915/i915_drv.c static int i915_getparam_ioctl(struct · line 467
Quoted 9 lines
drivers/gpu/drm/i915/i915_drv.c +3
-1@@ -461,7 +461,9 @@ static int i915_getparam_ioctl(struct drm_device *dev, void *data, return -ENODEV ;break ;case I915_PARAM_SUBSLICE_MASK : - value = sseu->subslice_mask[0 ]; +/* Only copy bits from the first slice */ +memcpy (&value, sseu->subslice_mask, +min (sseu->ss_stride, (u8 )sizeof (value)));Frankly I'd rather see this written in self-evident code without the comment.
Sure, I'll take a look.
Thanks for the comments!
Stuart
Quoted 5 lines
BR,
Jani.
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 24 lines · Daniele Ceraolo Spurio
Quoted 12 lines · Jani
Hi,
Quoted 10 lines
-----Original Message-----
From: Intel-gfx [mailto:[email protected]] On Behalf Of
Summers, Stuart
Sent: tiistai 28. toukokuuta 2019 21.33
To: Navare, Manasi D <[email protected]>
Cc: [email protected]
Subject: Re: [Intel-gfx] [CI 0/5] Refactor to expand subslice maskQuoted 9 lines
Quoted 4 lines · Manasi Navare
Quoted 1 line
Pushed to dinq, thanks for the patches and the reviews!
Thanks for the push Manasi and the reviews Daniele and others!
This broke all the ICL systems because CI data was not looked that they did not actually even boot at all.
All ICL's in BAT and whole ICL shards.
Quoted 6 lines
Can we change the CI reply for the case where there are extra missing
machines compared to the reference run from SUCCESS to WARNING or something like that, so people have a clearer indication that something
might have gone wrong?
I agree here. I'm sure with time and experience these types of things will get easier to parse, but this was very unobvious to me when posting. I have no problem reworking, but would really appreciate a solution to this from the CI side to ensure we don't hit this type of thing in the future.
Thanks,
Stuart
Quoted 76 lines
Daniele
Quoted 73 lines
Quoted 67 lines
-Stuart
Quoted 63 lines
Regards
ManasiQuoted 58 lines · Stuart Summers
This patch series contains a few code clean-up patches, followed by
a patch which changes the storage of the subslice mask to better
match the userspace access through theI915_QUERY_TOPOLOGY_INFO
ioctl. The index into thesubslice_maskarray is then calculated:
slice * subslice stride + subslice index / 8v2: fix
i915_pm_sseutest failure
v3: no changes to patches in the series, just resending to pick up
in CI correctly
v4: rebase
v5: fix header test
v6: address review comments from Jari
address minor checkpatch warning in existing code useeu_stridefor EU div-by-8
v7: another rebase
v8: address review comments from Tvrtko and Daniele
v9: address review comments from Daniele
v10: add reviewed-by on last patch with minor suggested change,
rebase, and repost for CIStuart Summers (5):
drm/i915: Use local variable for SSEU info in GETPARAM
ioctl
drm/i915: Add macro for SSEU stride calculation drm/i915: Move calculation of subslices per slice to new
function
drm/i915: Refactor sseu helper functions drm/i915: Expand subslice maskdrivers/gpu/drm/i915/gt/intel_engine_cs.c | 24 ++- drivers/gpu/drm/i915/gt/intel_engine_types.h | 30 ++-- drivers/gpu/drm/i915/gt/intel_hangcheck.c | 3 +- drivers/gpu/drm/i915/gt/intel_sseu.c | 62 +++++++ drivers/gpu/drm/i915/gt/intel_sseu.h | 35 +++- drivers/gpu/drm/i915/gt/intel_workarounds.c | 2 +- drivers/gpu/drm/i915/i915_debugfs.c | 46 ++--- drivers/gpu/drm/i915/i915_drv.c | 15 +- drivers/gpu/drm/i915/i915_gpu_error.c | 5 +- drivers/gpu/drm/i915/i915_query.c | 15 +- drivers/gpu/drm/i915/intel_device_info.c | 176 +++++++++++-- ------ drivers/gpu/drm/i915/intel_device_info.h | 47 ----- 12 files changed, 280 insertions(+), 180 deletions(-)--
2.21.0.5.gaeb582a983_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Hi,
Quoted 41 lines
-----Original Message-----
From: Summers, Stuart
Sent: keskiviikko 29. toukokuuta 2019 19.02
To: Saarinen, Jani <[email protected]>; Ceraolo Spurio, Daniele <[email protected]>; Navare, Manasi D <[email protected]>
Cc: [email protected]
Subject: Re: [Intel-gfx] [CI 0/5] Refactor to expand subslice maskQuoted 24 lines · Daniele Ceraolo Spurio
Quoted 12 lines · Jani
Hi,
Quoted 10 lines
-----Original Message-----
From: Intel-gfx [mailto:[email protected]] On Behalf Of
Summers, Stuart
Sent: tiistai 28. toukokuuta 2019 21.33
To: Navare, Manasi D <[email protected]>
Cc: [email protected]
Subject: Re: [Intel-gfx] [CI 0/5] Refactor to expand subslice maskQuoted 9 lines
Quoted 4 lines · Manasi Navare
Quoted 1 line
Pushed to dinq, thanks for the patches and the reviews!
Thanks for the push Manasi and the reviews Daniele and others!
This broke all the ICL systems because CI data was not looked that they did not actually even boot at all.
All ICL's in BAT and whole ICL shards.Quoted 6 lines
Can we change the CI reply for the case where there are extra missing
machines compared to the reference run from SUCCESS to WARNING or something like that, so people have a clearer indication that something
might have gone wrong?
Quoted 5 lines
I agree here. I'm sure with time and experience these types of things will get easier to parse, but this was very unobvious to me when posting. I have no problem reworking, but would really appreciate a solution to this from the CI side to ensure we don't hit this type of thing in the future.
Sure, CI team already discussed on this.
But going forward. Can you fix this still today that ICL's systems are green not orange on ci-grid. So would be good to get to the state that was on CI_DRM_6158.
Reference eg. : https://intel-gfx-ci.01.org/tree/drm-tip/fi-icl-u2.html so clearly after module reload we fail. <3> [415.887946] [drm:_wa_add [i915]] *ERROR* Discarding overwritten w/a for reg 7034 (mask: ffffffff, value: 80000280)
Br,
Jani
Quoted 80 lines
Thanks,
StuartQuoted 76 lines
Daniele
Quoted 73 lines
Quoted 67 lines
-Stuart
Quoted 63 lines
Regards
ManasiQuoted 58 lines · Stuart Summers
This patch series contains a few code clean-up patches, followed by
a patch which changes the storage of the subslice mask to better
match the userspace access through theI915_QUERY_TOPOLOGY_INFO
ioctl. The index into thesubslice_maskarray is then calculated:
slice * subslice stride + subslice index / 8v2: fix
i915_pm_sseutest failure
v3: no changes to patches in the series, just resending to pick up
in CI correctly
v4: rebase
v5: fix header test
v6: address review comments from Jari
address minor checkpatch warning in existing code useeu_stridefor EU div-by-8
v7: another rebase
v8: address review comments from Tvrtko and Daniele
v9: address review comments from Daniele
v10: add reviewed-by on last patch with minor suggested change,
rebase, and repost for CIStuart Summers (5):
drm/i915: Use local variable for SSEU info in GETPARAM
ioctl
drm/i915: Add macro for SSEU stride calculation drm/i915: Move calculation of subslices per slice to new
function
drm/i915: Refactor sseu helper functions drm/i915: Expand subslice maskdrivers/gpu/drm/i915/gt/intel_engine_cs.c | 24 ++- drivers/gpu/drm/i915/gt/intel_engine_types.h | 30 ++-- drivers/gpu/drm/i915/gt/intel_hangcheck.c | 3 +- drivers/gpu/drm/i915/gt/intel_sseu.c | 62 +++++++ drivers/gpu/drm/i915/gt/intel_sseu.h | 35 +++- drivers/gpu/drm/i915/gt/intel_workarounds.c | 2 +- drivers/gpu/drm/i915/i915_debugfs.c | 46 ++--- drivers/gpu/drm/i915/i915_drv.c | 15 +- drivers/gpu/drm/i915/i915_gpu_error.c | 5 +- drivers/gpu/drm/i915/i915_query.c | 15 +- drivers/gpu/drm/i915/intel_device_info.c | 176 +++++++++++-- ------ drivers/gpu/drm/i915/intel_device_info.h | 47 ----- 12 files changed, 280 insertions(+), 180 deletions(-)--
2.21.0.5.gaeb582a983_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 56 lines · Jani
Hi,
Quoted 45 lines
-----Original Message-----
From: Summers, Stuart
Sent: keskiviikko 29. toukokuuta 2019 19.02
To: Saarinen, Jani <[email protected]>; Ceraolo Spurio, Daniele
<[email protected]>; Navare, Manasi D <[email protected]>
Cc: [email protected]
Subject: Re: [Intel-gfx] [CI 0/5] Refactor to expand subslice maskQuoted 27 lines · Daniele Ceraolo Spurio
Quoted 16 lines · Jani
Hi,
Quoted 14 lines
-----Original Message-----
From: Intel-gfx [mailto:
[email protected]]
On Behalf Of
Summers, Stuart
Sent: tiistai 28. toukokuuta 2019 21.33
To: Navare, Manasi D <[email protected]>
Cc: [email protected]
Subject: Re: [Intel-gfx] [CI 0/5] Refactor to expand subslice maskQuoted 1 line · Manasi Navare
Pushed to dinq, thanks for the patches and the reviews!
Quoted 8 lines
Quoted 2 lines
Thanks for the push Manasi and the reviews Daniele and others!sk: ffffffff, value: 80000280)
This broke all the ICL systems because CI data was not looked that
they did not actually even boot at all.
All ICL's in BAT and whole ICL shards.Quoted 6 lines
Can we change the CI reply for the case where there are extra missing
machines compared to the reference run from SUCCESS to WARNING or something like that, so people have a clearer indication that something
might have gone wrong?Quoted 7 lines
I agree here. I'm sure with time and experience these types of things
will get easier to parse, but this was very unobvious to me when posting. I have no problem reworking, but would really appreciate a solution to this from the CI side to ensure we don't hit this type of
thing in the future.
Quoted 9 lines
Sure, CI team already discussed on this.
But going forward. Can you fix this still today that ICL's systems are green not orange on ci-grid.
So would be good to get to the state that was onCI_DRM_6158. Reference eg. :
https://intel-gfx-ci.01.org/tree/drm-tip/fi-icl-u2.html so clearly after module reload we fail.
<3> [415.887946] [drm:_wa_add [i915]] *ERROR* Discarding overwritten w/a for reg 7034 (mask: ffffffff, value: 80000280)
Hi Jani,
I will likely not have time to get to this today or maybe even tomorrow unfortunately. I'll try to look at this as part of my rework of the SSEU revert from yesterday.
Thanks,
Stuart
Quoted 89 lines
Br,
JaniQuoted 86 lines
Thanks,
StuartQuoted 82 lines
Daniele
Quoted 79 lines
Quoted 73 lines
-Stuart
Quoted 69 lines
Regards
ManasiQuoted 63 lines · Stuart Summers
This patch series contains a few code clean-up patches, followed by
a patch which changes the storage of the subslice mask to better
match the userspace access through theI915_QUERY_TOPOLOGY_INFO
ioctl. The index into thesubslice_maskarray is then calculated:
slice * subslice stride + subslice index / 8v2: fix
i915_pm_sseutest failure
v3: no changes to patches in the series, just resending to
pick up
in CI correctly
v4: rebase
v5: fix header test
v6: address review comments from Jari
address minor checkpatch warning in existing code useeu_stridefor EU div-by-8
v7: another rebase
v8: address review comments from Tvrtko and Daniele
v9: address review comments from Daniele
v10: add reviewed-by on last patch with minor suggested change,
rebase, and repost for CIStuart Summers (5):
drm/i915: Use local variable for SSEU info in GETPARAM
ioctl
drm/i915: Add macro for SSEU stride calculation drm/i915: Move calculation of subslices per slice to
new
function
drm/i915: Refactor sseu helper functions drm/i915: Expand subslice maskdrivers/gpu/drm/i915/gt/intel_engine_cs.c | 24 ++- drivers/gpu/drm/i915/gt/intel_engine_types.h | 30 ++-- drivers/gpu/drm/i915/gt/intel_hangcheck.c | 3 +- drivers/gpu/drm/i915/gt/intel_sseu.c | 62 +++++++ drivers/gpu/drm/i915/gt/intel_sseu.h | 35 +++- drivers/gpu/drm/i915/gt/intel_workarounds.c | 2 +- drivers/gpu/drm/i915/i915_debugfs.c | 46 ++ --- drivers/gpu/drm/i915/i915_drv.c | 15 +- drivers/gpu/drm/i915/i915_gpu_error.c | 5 +- drivers/gpu/drm/i915/i915_query.c | 15 +- drivers/gpu/drm/i915/intel_device_info.c | 176 +++++++++++-- ------ drivers/gpu/drm/i915/intel_device_info.h | 47 ---- - 12 files changed, 280 insertions(+), 180 deletions(-)--
2.21.0.5.gaeb582a983_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 49 lines · Jani
Hi,
Quoted 41 lines
-----Original Message-----
From: Summers, Stuart
Sent: keskiviikko 29. toukokuuta 2019 19.02
To: Saarinen, Jani <[email protected]>; Ceraolo Spurio, Daniele <[email protected]>; Navare, Manasi D <[email protected]>
Cc: [email protected]
Subject: Re: [Intel-gfx] [CI 0/5] Refactor to expand subslice maskQuoted 24 lines · Daniele Ceraolo Spurio
Quoted 12 lines · Jani
Hi,
Quoted 10 lines
-----Original Message-----
From: Intel-gfx [mailto:[email protected]] On Behalf Of
Summers, Stuart
Sent: tiistai 28. toukokuuta 2019 21.33
To: Navare, Manasi D <[email protected]>
Cc: [email protected]
Subject: Re: [Intel-gfx] [CI 0/5] Refactor to expand subslice maskQuoted 9 lines
Quoted 4 lines · Manasi Navare
Quoted 1 line
Pushed to dinq, thanks for the patches and the reviews!
Thanks for the push Manasi and the reviews Daniele and others!
This broke all the ICL systems because CI data was not looked that they did not actually even boot at all.
All ICL's in BAT and whole ICL shards.Quoted 6 lines
Can we change the CI reply for the case where there are extra missing
machines compared to the reference run from SUCCESS to WARNING or something like that, so people have a clearer indication that something
might have gone wrong?Quoted 5 lines
I agree here. I'm sure with time and experience these types of things will get easier to parse, but this was very unobvious to me when posting. I have no problem reworking, but would really appreciate a solution to this from the CI side to ensure we don't hit this type of thing in the future.
Quoted 8 lines
Sure, CI team already discussed on this.
But going forward. Can you fix this still today that ICL's systems are green not orange on ci-grid. So would be good to get to the state that was onCI_DRM_6158.
Reference eg. : https://intel-gfx-ci.01.org/tree/drm-tip/fi-icl-u2.html so clearly after module reload we fail. <3> [415.887946] [drm:_wa_add [i915]] *ERROR* Discarding overwritten w/a for reg 7034 (mask: ffffffff, value: 80000280)Br,
Jani
This doesn't seem to have anything to do with this series though. Looks like we duplicated the WA when merging 'drm/drm-next' into drm-tip:
static void icl_ctx_workarounds_init(struct intel_engine_cs *engine,
struct i915_wa_list *wal)
{
struct drm_i915_private *i915 = engine->i915;
/* WaDisableBankHangMode:icl */
wa_write(wal,
GEN8_L3CNTLREG,
intel_uncore_read(engine->uncore, GEN8_L3CNTLREG) |
GEN8_ERRDETBCTRL);
/* WaDisableBankHangMode:icl */
wa_write(wal,
GEN8_L3CNTLREG,
intel_uncore_read(engine->uncore, GEN8_L3CNTLREG) |
GEN8_ERRDETBCTRL);AFAICS the duplication is added by:
commit 7126b65091c417e757b638065ae4fdc2a5dc2f5c
Merge: 3aea8d02f801 14ee642c2ab0
Author: Chris Wilson <[email protected]>
Date: Thu May 30 12:06:55 2019 +0100
Merge remote-tracking branch 'drm/drm-next' into drm-tip
Daniele
Quoted 75 lines
Quoted 75 lines
Thanks,
StuartQuoted 71 lines
Daniele
Quoted 68 lines
Quoted 67 lines
-Stuart
Quoted 63 lines
Regards
ManasiQuoted 58 lines · Stuart Summers
This patch series contains a few code clean-up patches, followed by
a patch which changes the storage of the subslice mask to better
match the userspace access through theI915_QUERY_TOPOLOGY_INFO
ioctl. The index into thesubslice_maskarray is then calculated:
slice * subslice stride + subslice index / 8v2: fix
i915_pm_sseutest failure
v3: no changes to patches in the series, just resending to pick up
in CI correctly
v4: rebase
v5: fix header test
v6: address review comments from Jari
address minor checkpatch warning in existing code useeu_stridefor EU div-by-8
v7: another rebase
v8: address review comments from Tvrtko and Daniele
v9: address review comments from Daniele
v10: add reviewed-by on last patch with minor suggested change,
rebase, and repost for CIStuart Summers (5):
drm/i915: Use local variable for SSEU info in GETPARAM
ioctl
drm/i915: Add macro for SSEU stride calculation drm/i915: Move calculation of subslices per slice to new
function
drm/i915: Refactor sseu helper functions drm/i915: Expand subslice maskdrivers/gpu/drm/i915/gt/intel_engine_cs.c | 24 ++- drivers/gpu/drm/i915/gt/intel_engine_types.h | 30 ++-- drivers/gpu/drm/i915/gt/intel_hangcheck.c | 3 +- drivers/gpu/drm/i915/gt/intel_sseu.c | 62 +++++++ drivers/gpu/drm/i915/gt/intel_sseu.h | 35 +++- drivers/gpu/drm/i915/gt/intel_workarounds.c | 2 +- drivers/gpu/drm/i915/i915_debugfs.c | 46 ++--- drivers/gpu/drm/i915/i915_drv.c | 15 +- drivers/gpu/drm/i915/i915_gpu_error.c | 5 +- drivers/gpu/drm/i915/i915_query.c | 15 +- drivers/gpu/drm/i915/intel_device_info.c | 176 +++++++++++-- ------ drivers/gpu/drm/i915/intel_device_info.h | 47 ----- 12 files changed, 280 insertions(+), 180 deletions(-)--
2.21.0.5.gaeb582a983_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx