Skip to contentSkip to conversation

runqemu: Add the support to pass multi ports to tcpserial parameter

PATCH In review Kevin Hao 2 participants 3 messages Jun 6, 2019 – Jun 8, 2019

lore
Share & tools
lore

Kevin Hao

author
#0 lore raw

PATCH 1/2 runqemu: Add the support to pass multi ports to tcpserial parameter

In some cases(such as the oeqa's qemurunner), we need to setup multi serial devices via the '-serial 127.0.0.1:xx" and the order of them is significant. The mixing use of "tcpserial" and "-serial 127.0.0.1:xx" cause ambiguous issues and we can't fix it by only adjusting the order of them. So add the support to pass multi ports to the tcpserial parameter, this will make sure that the order of setting up the serial is really what we want.

[YOCTO Bug 13309]

---
 scripts/runqemu | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
scripts/runqemu +9 -3
index 5752ecda731c..af90c010da28 100755
@@ -438,7 +438,7 @@ class BaseConfig(object):
             elif arg == 'publicvnc':
                 self.qemu_opt_script += ' -vnc :0'
             elif arg.startswith('tcpserial='):
-                self.tcpserial_portnum = arg[len('tcpserial='):]
+                self.tcpserial_portnum = '%s' % arg[len('tcpserial='):]
             elif arg.startswith('biosdir='):
                 self.custombiosdir = arg[len('biosdir='):]
             elif arg.startswith('biosfilename='):
@@ -682,10 +682,16 @@ class BaseConfig(object):
 
     def check_tcpserial(self):
         if self.tcpserial_portnum:
+            ports = self.tcpserial_portnum.split(':')
+            port = ports[0]
             if self.get('QB_TCPSERIAL_OPT'):
-                self.qemu_opt_script += ' ' + self.get('QB_TCPSERIAL_OPT').replace('@PORT@', self.tcpserial_portnum)
+                self.qemu_opt_script += ' ' + self.get('QB_TCPSERIAL_OPT').replace('@PORT@', port)
             else:
-                self.qemu_opt_script += ' -serial tcp:127.0.0.1:%s' % self.tcpserial_portnum
+                self.qemu_opt_script += ' -serial tcp:127.0.0.1:%s' % port
+
+            if len(ports) > 1:
+                for port in ports[1:]:
+                    self.qemu_opt_script += ' -serial tcp:127.0.0.1:%s' % port
 
     def check_and_set(self):
         """Check configs sanity and set when needed"""
Signature · 1 line
2.14.4
author
#1 lore raw

PATCH 2/2 oeqa/utils/qemurunner: Set both the threadport&serverport with tcpserial parameter

After the commit ad522ea6a64e ("runqemu: Let qemuparams override default settings"), the order of the two "-serial" parameters when running the qemu have been switched. The effect of this is that the logging thread will use ttyS1 (of course can't capture the kernel boot message anymore), and the test command will run on the ttyS0. So the output of the test command may be mangled by the kernel message (such as call trace), and let the test command produce a fake timeout error message. We can't fix it by just adjusting the order of the threadport and serverport, since it will break some machines such as qemuarm64 which use the virtio serial. So using the tcpserial to setup both the threadport and serverport.

[YOCTO Bug 13309]

---
 meta/lib/oeqa/utils/qemurunner.py | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
meta/lib/oeqa/utils/qemurunner.py +2 -2
index fd386ef5a20a..6d2860c1061a 100644
@@ -155,11 +155,11 @@ class QemuRunner:
         # and analyze descendents in order to determine it.
         if os.path.exists(self.qemu_pidfile):
             os.remove(self.qemu_pidfile)
-        self.qemuparams = 'bootparams="{0}" qemuparams="-serial tcp:127.0.0.1:{1} -pidfile {2}"'.format(bootparams, threadport, self.qemu_pidfile)
+        self.qemuparams = 'bootparams="{0}" qemuparams="-pidfile {1}"'.format(bootparams, self.qemu_pidfile)
         if qemuparams:
             self.qemuparams = self.qemuparams[:-1] + " " + qemuparams + " " + '\"'
 
-        launch_cmd += ' tcpserial=%s %s' % (self.serverport, self.qemuparams)
+        launch_cmd += ' tcpserial=%s:%s %s' % (threadport, self.serverport, self.qemuparams)
 
         self.origchldhandler = signal.getsignal(signal.SIGCHLD)
         signal.signal(signal.SIGCHLD, self.handleSIGCHLD)
Signature · 1 line
2.14.4
#2 lore raw

✗ patchtest: failure for "runqemu: Add the support to pa..." and 1 more

In reply to Kevin Hao

== Series Details ==

Series: "runqemu: Add the support to pa..." and 1 more
Revision: 1
URL : https://patchwork.openembedded.org/series/18016/
State : failure

== Summary ==

Thank you for submitting this patch series to OpenEmbedded Core. This is an automated response. Several tests have been executed on the proposed series by patchtest resulting in the following failures:

* Patch            [1/2] runqemu: Add the support to pass multi ports to tcpserial parameter
 Issue             Yocto Project bugzilla tag is not correctly formatted [test_bugzilla_entry_format] 
  Suggested fix    Specify bugzilla ID in commit description with format: "[YOCTO #<bugzilla ID>]"

* Issue Series does not apply on top of target branch [test_series_merge_on_head]
Suggested fix Rebase your series on top of targeted branch
Targeted branch master (currently at 666f6192aa)

If you believe any of these test results are incorrect, please reply to the mailing list ([email protected]) raising your concerns. Otherwise we would appreciate you correcting the issues and submitting a new version of the patchset if applicable. Please ensure you add/increment the version number when sending the new version (i.e. [PATCH] -> [PATCH v2] -> [PATCH v3] -> ...).

---

Guidelines:     https://www.openembedded.org/wiki/Commit_Patch_Message_Guidelines
Test framework: http://git.yoctoproject.org/cgit/cgit.cgi/patchtest
Test suite:     http://git.yoctoproject.org/cgit/cgit.cgi/patchtest-oe