Bring tinker-rk3288 back into SPL size limit?
Hey,
With Heinrich's series to enforce a size limit on SPL and Simon Goldschmidt's enhancements on top of that, we're now seeing that tinker-rk3288 has an SPL that is too large to function. And it's now also causing the build to fail. So, good that we're catching this at least. Can you please look into what we need to do to get the image to fit within the size constraints? Thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190608/da6945ba/attachment.sig>
+Kever.
Quoted 13 lines · Tom Rini
Hey,
With Heinrich's series to enforce a size limit on SPL and Simon Goldschmidt's enhancements on top of that, we're now seeing that tinker-rk3288 has an SPL that is too large to function. And it's now also causing the build to fail. So, good that we're catching this at least. Can you please look into what we need to do to get the image to fit within the size constraints? Thanks!
Signature · 1 line
Tom
Quoted 9 lines · Tom Rini
Hey,
With Heinrich's series to enforce a size limit on SPL and Simon Goldschmidt's enhancements on top of that, we're now seeing that tinker-rk3288 has an SPL that is too large to function. And it's now also causing the build to fail. So, good that we're catching this at least. Can you please look into what we need to do to get the image to fit within the size constraints? Thanks!
I have used TPL before with tinker while supporting falcon. I think we can use TPL here, what do you think?
Quoted 12 lines · Jagan Teki
Quoted 8 lines · Tom Rini
Hey,
With Heinrich's series to enforce a size limit on SPL and Simon Goldschmidt's enhancements on top of that, we're now seeing that tinker-rk3288 has an SPL that is too large to function. And it's now also causing the build to fail. So, good that we're catching this at least. Can you please look into what we need to do to get the image to fit within the size constraints? Thanks!
I have used TPL before with tinker while supporting falcon. I think we can use TPL here, what do you think?
Yes, enable TPL is a solution for this issue.
Since we are not able to control the SPL size easily on upstream, and most rockchip SoCs have size limit for SRAM, so other than Tinker board, there should be many other rk3288 based boards have the similar issue.
Thanks,
- Kever
[U-Boot] Bring tinker-rk3288 back into SPL size limit?【请注意,邮件由[email protected]代发】
Hi Tom,
I got a Tinker board today and try to boot with SD card to enable TPL.
The SPL for Tinker board is broken and the size is too big at v2019.04, and v2019.01 is OK.
Other than size limit, seems there are some other issue for Tinker board TPL,
I can't get any debug message from uart even after I enable TPL(works correctly)
and move the SPL to DDR without size limit, very strange, I need
more time to debug the SPL issue.
Thanks,
- Kever
Quoted 27 lines · Kever Yang
Quoted 12 lines · Jagan Teki
Quoted 8 lines · Tom Rini
Hey,
With Heinrich's series to enforce a size limit on SPL and Simon Goldschmidt's enhancements on top of that, we're now seeing that tinker-rk3288 has an SPL that is too large to function. And it's now also causing the build to fail. So, good that we're catching this at least. Can you please look into what we need to do to get the image to fit within the size constraints? Thanks!
I have used TPL before with tinker while supporting falcon. I think we can use TPL here, what do you think?
Yes, enable TPL is a solution for this issue.
Since we are not able to control the SPL size easily on upstream, and most rockchip SoCs have size limit for SRAM, so other than Tinker board, there should be many other rk3288 based boards have the similar issue.Thanks,
- Kever_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
[U-Boot] Bring tinker-rk3288 back into SPL size [email protected]?????????
Quoted 10 lines · Kever Yang
Hi Tom,
I got a Tinker board today and try to boot with SD card to enable TPL.
The SPL for Tinker board is broken and the size is too big at v2019.04, and v2019.01 is OK.
Other than size limit, seems there are some other issue for Tinker board TPL,
Quoted 6 lines
I can't get any debug message from uart even after I enable TPL(works correctly)
and move the SPL to DDR without size limit, very strange, I need
more time to debug the SPL issue.
for the SPL size issue try master, it contains the following:
commit 68b90e57bc034e237923b02acb633dc4e91d44cb
Author: Heinrich Schuchardt <[email protected]> AuthorDate: Wed Feb 27 20:05:43 2019 +0100 Commit: Tom Rini <[email protected]> CommitDate: Tue Jun 11 08:13:05 2019 -0400
configs: tinker-rk3288 disable CONFIG_SPL_I2C_SUPPORT
The SPL for the Tinker Board has to fit into 32 KiB. Currently this limit is exceeded.
CONFIG_SPL_I2C_SUPPORT is not needed to move to main U-Boot. So let's disable it.
configs/tinker-rk3288_defconfig +0 -1
@@ -20,7 +20,6 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_TEXT_BASE=0xff704000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 -CONFIG_SPL_I2C_SUPPORT=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y
Quoted 39 lines
Thanks,
- KeverQuoted 19 lines · Kever Yang
Quoted 12 lines · Jagan Teki
Quoted 8 lines · Tom Rini
Hey,
With Heinrich's series to enforce a size limit on SPL and Simon Goldschmidt's enhancements on top of that, we're now seeing that tinker-rk3288 has an SPL that is too large to function. And it's now also causing the build to fail. So, good that we're catching this at least. Can you please look into what we need to do to get the image to fit within the size constraints? Thanks!
I have used TPL before with tinker while supporting falcon. I think we can use TPL here, what do you think?
Yes, enable TPL is a solution for this issue.
Since we are not able to control the SPL size easily on upstream, and most rockchip SoCs have size limit for SRAM, so other than Tinker board, there should be many other rk3288 based boards have the similar issue.Quoted 8 lines
Thanks,
- Kever_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot