Skip to contentSkip to conversation

drm/lima: Mark 64-bit number as ULL to silence Smatch warning

PATCH Superseded Krzysztof Kozlowski 2 participants 6 messages Jun 18, 2019 – Jun 20, 2019

Subsystems (4)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/3 drm/lima: Mark 64-bit number as ULL to silence Smatch warning

Mark long numbers with ULL to silence the Smatch warning:

    drivers/gpu/drm/lima/lima_device.c:314:32: warning: constant 0x100000000 is so big it is long long
---
 drivers/gpu/drm/lima/lima_vm.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/lima/lima_vm.h +2 -2
index caee2f8a29b4..e0bdedcf14dd 100644
@@ -15,9 +15,9 @@
 #define LIMA_VM_NUM_PT_PER_BT (1 << LIMA_VM_NUM_PT_PER_BT_SHIFT)
 #define LIMA_VM_NUM_BT (LIMA_PAGE_ENT_NUM >> LIMA_VM_NUM_PT_PER_BT_SHIFT)
 
-#define LIMA_VA_RESERVE_START  0xFFF00000
+#define LIMA_VA_RESERVE_START  0x0FFF00000ULL
 #define LIMA_VA_RESERVE_DLBU   LIMA_VA_RESERVE_START
-#define LIMA_VA_RESERVE_END    0x100000000
+#define LIMA_VA_RESERVE_END    0x100000000ULL
 
 struct lima_device;
 
Signature · 1 line
2.17.1
#1 lore raw

PATCH 2/3 drm/lima: Reduce the amount of logs on deferred probe

There is no point to print deferred probe (and its failures to get resources) as an error. For example getting a regulator causes three unneeded error messages:

    lima 13000000.gpu: failed to get regulator: -517
    lima 13000000.gpu: regulator init fail -517
    lima 13000000.gpu: Fatal error during GPU init

Also do not print clock rates before the initialization finishes because they will be duplicated after deferral. Each probe step already prints error so remove the final error message "Fatal error during GPU init".

In case of multiple probe tries this would pollute the dmesg.

---
 drivers/gpu/drm/lima/lima_device.c | 17 ++++++-----------
 drivers/gpu/drm/lima/lima_drv.c    |  4 +---
 2 files changed, 7 insertions(+), 14 deletions(-)
drivers/gpu/drm/lima/lima_device.c +6 -11
index 570d0e93f9a9..bb2eaa4f370e 100644
@@ -80,7 +80,6 @@ const char *lima_ip_name(struct lima_ip *ip)
 static int lima_clk_init(struct lima_device *dev)
 {
 	int err;
-	unsigned long bus_rate, gpu_rate;
 
 	dev->clk_bus = devm_clk_get(dev->dev, "bus");
 	if (IS_ERR(dev->clk_bus)) {
@@ -94,12 +93,6 @@ static int lima_clk_init(struct lima_device *dev)
 		return PTR_ERR(dev->clk_gpu);
 	}
 
-	bus_rate = clk_get_rate(dev->clk_bus);
-	dev_info(dev->dev, "bus rate = %lu\n", bus_rate);
-
-	gpu_rate = clk_get_rate(dev->clk_gpu);
-	dev_info(dev->dev, "mod rate = %lu", gpu_rate);
-
 	err = clk_prepare_enable(dev->clk_bus);
 	if (err)
 		return err;
@@ -145,7 +138,8 @@ static int lima_regulator_init(struct lima_device *dev)
 		dev->regulator = NULL;
 		if (ret == -ENODEV)
 			return 0;
-		dev_err(dev->dev, "failed to get regulator: %d\n", ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev->dev, "failed to get regulator: %d\n", ret);
 		return ret;
 	}
 
@@ -297,10 +291,8 @@ int lima_device_init(struct lima_device *ldev)
 	}
 
 	err = lima_regulator_init(ldev);
-	if (err) {
-		dev_err(ldev->dev, "regulator init fail %d\n", err);
+	if (err)
 		goto err_out0;
-	}
 
 	ldev->empty_vm = lima_vm_create(ldev);
 	if (!ldev->empty_vm) {
@@ -343,6 +335,9 @@ int lima_device_init(struct lima_device *ldev)
 	if (err)
 		goto err_out5;
 
+	dev_info(ldev->dev, "bus rate = %lu\n", clk_get_rate(ldev->clk_bus));
+	dev_info(ldev->dev, "mod rate = %lu", clk_get_rate(ldev->clk_gpu));
+
 	return 0;
 
 err_out5:
drivers/gpu/drm/lima/lima_drv.c +1 -3
index b29c26cd13b2..cebc44592e47 100644
@@ -307,10 +307,8 @@ static int lima_pdev_probe(struct platform_device *pdev)
 	ldev->ddev = ddev;
 
 	err = lima_device_init(ldev);
-	if (err) {
-		dev_err(&pdev->dev, "Fatal error during GPU init\n");
+	if (err)
 		goto err_out1;
-	}
 
 	/*
 	 * Register the DRM device with the core and the connectors with
Signature · 1 line
2.17.1
maintainer
#2 lore raw

Re: [PATCH 2/3] drm/lima: Reduce the amount of logs on deferred probe

It looks like lima_clk_init will have the same problem if devm_clk_get returns -EPROBE_DEFER.

Regards,
Qiang

Quoted 98 lines · Krzysztof Kozlowski

There is no point to print deferred probe (and its failures to get resources) as an error. For example getting a regulator causes three unneeded error messages:

    lima 13000000.gpu: failed to get regulator: -517
    lima 13000000.gpu: regulator init fail -517
    lima 13000000.gpu: Fatal error during GPU init

Also do not print clock rates before the initialization finishes because they will be duplicated after deferral. Each probe step already prints error so remove the final error message "Fatal error during GPU init".

In case of multiple probe tries this would pollute the dmesg.

---
 drivers/gpu/drm/lima/lima_device.c | 17 ++++++-----------
 drivers/gpu/drm/lima/lima_drv.c    |  4 +---
 2 files changed, 7 insertions(+), 14 deletions(-)
drivers/gpu/drm/lima/lima_device.c +6 -11
index 570d0e93f9a9..bb2eaa4f370e 100644
@@ -80,7 +80,6 @@ const char *lima_ip_name(struct lima_ip *ip)
 static int lima_clk_init(struct lima_device *dev)
 {
        int err;
-       unsigned long bus_rate, gpu_rate;
 
        dev->clk_bus = devm_clk_get(dev->dev, "bus");
        if (IS_ERR(dev->clk_bus)) {
@@ -94,12 +93,6 @@ static int lima_clk_init(struct lima_device *dev)
                return PTR_ERR(dev->clk_gpu);
        }
 
-       bus_rate = clk_get_rate(dev->clk_bus);
-       dev_info(dev->dev, "bus rate = %lu\n", bus_rate);
-
-       gpu_rate = clk_get_rate(dev->clk_gpu);
-       dev_info(dev->dev, "mod rate = %lu", gpu_rate);
-
        err = clk_prepare_enable(dev->clk_bus);
        if (err)
                return err;
@@ -145,7 +138,8 @@ static int lima_regulator_init(struct lima_device *dev)
                dev->regulator = NULL;
                if (ret == -ENODEV)
                        return 0;
-               dev_err(dev->dev, "failed to get regulator: %d\n", ret);
+               if (ret != -EPROBE_DEFER)
+                       dev_err(dev->dev, "failed to get regulator: %d\n", ret);
                return ret;
        }
 
@@ -297,10 +291,8 @@ int lima_device_init(struct lima_device *ldev)
        }
 
        err = lima_regulator_init(ldev);
-       if (err) {
-               dev_err(ldev->dev, "regulator init fail %d\n", err);
+       if (err)
                goto err_out0;
-       }
 
        ldev->empty_vm = lima_vm_create(ldev);
        if (!ldev->empty_vm) {
@@ -343,6 +335,9 @@ int lima_device_init(struct lima_device *ldev)
        if (err)
                goto err_out5;
 
+       dev_info(ldev->dev, "bus rate = %lu\n", clk_get_rate(ldev->clk_bus));
+       dev_info(ldev->dev, "mod rate = %lu", clk_get_rate(ldev->clk_gpu));
+
        return 0;
 
 err_out5:
drivers/gpu/drm/lima/lima_drv.c +1 -4
index b29c26cd13b2..cebc44592e47 100644
@@ -307,10 +307,8 @@ static int lima_pdev_probe(struct platform_device *pdev)
        ldev->ddev = ddev;
 
        err = lima_device_init(ldev);
-       if (err) {
-               dev_err(&pdev->dev, "Fatal error during GPU init\n");
+       if (err)
                goto err_out1;
-       }
 
        /*
         * Register the DRM device with the core and the connectors with
--

2.17.1

#3 lore raw

Re: [PATCH 2/3] drm/lima: Reduce the amount of logs on deferred probe

Quoted 3 lines · Qiang Yu

It looks like lima_clk_init will have the same problem if devm_clk_get returns -EPROBE_DEFER.

Indeed, although I did not experience it but it is valid point. I'll send v2.

Best regards,
Krzysztof

#4 lore raw

PATCH 3/3 drm/panfrost: Reduce the amount of logs on deferred probe

In reply to Krzysztof Kozlowski

There is no point to print deferred probe (and its failures to get resources) as an error.

In case of multiple probe tries this would pollute the dmesg.

---
 drivers/gpu/drm/panfrost/panfrost_device.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/panfrost/panfrost_device.c +3 -1
index ccb8eb2a518c..858582a60090 100644
@@ -95,7 +95,9 @@ static int panfrost_regulator_init(struct panfrost_device *pfdev)
 		pfdev->regulator = NULL;
 		if (ret == -ENODEV)
 			return 0;
-		dev_err(pfdev->dev, "failed to get regulator: %d\n", ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(pfdev->dev, "failed to get regulator: %d\n",
+				ret);
 		return ret;
 	}
 
Signature · 1 line
2.17.1
maintainer Reviewed-by on v1 1/3
#5 lore raw
In reply to Krzysztof Kozlowski

Looks good for me, patch is:

I'll apply it to drm-misc-next.

Regards,
Qiang

Quoted 27 lines · Krzysztof Kozlowski

Mark long numbers with ULL to silence the Smatch warning:

    drivers/gpu/drm/lima/lima_device.c:314:32: warning: constant 0x100000000 is so big it is long long
---
 drivers/gpu/drm/lima/lima_vm.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/lima/lima_vm.h +2 -3
index caee2f8a29b4..e0bdedcf14dd 100644
@@ -15,9 +15,9 @@
 #define LIMA_VM_NUM_PT_PER_BT (1 << LIMA_VM_NUM_PT_PER_BT_SHIFT)
 #define LIMA_VM_NUM_BT (LIMA_PAGE_ENT_NUM >> LIMA_VM_NUM_PT_PER_BT_SHIFT)
 
-#define LIMA_VA_RESERVE_START  0xFFF00000
+#define LIMA_VA_RESERVE_START  0x0FFF00000ULL
 #define LIMA_VA_RESERVE_DLBU   LIMA_VA_RESERVE_START
-#define LIMA_VA_RESERVE_END    0x100000000
+#define LIMA_VA_RESERVE_END    0x100000000ULL
 
 struct lima_device;
 
--
Quoted 2 lines

2.17.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel