net: introduce packet capture support
PATCH v3 1/2 net: introduce packet capture support
Add support for capturing ethernet packets and storing them in memory in PCAP(2.4) format, later to be analyzed by any PCAP viewer software (IE. Wireshark)
This feature greatly assist debugging network issues such as detecting dropped packets, packet corruption etc.
---
v2: Fix type assignmnet to header.ts_sec
v3: Several suggestion changes by Bin and Alex:
* Change to implementation to command based.
* Added counters for incoming/outgoing packets.
* Support clearing the capture for multiple captures.
* Added documentation (separate patch).
cmd/Kconfig | 7 +++ cmd/net.c | 63 +++++++++++++++++++++ include/net.h | 56 +++++++++++++++++++ net/Makefile | 1 + net/net.c | 8 +++ net/pcap.c | 152 ++++++++++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 287 insertions(+) create mode 100644 net/pcap.c
cmd/Kconfig +7 -0
@@ -1239,6 +1239,13 @@ config BOOTP_NTPSERVER bool "Request & store 'ntpserverip' from BOOTP/DHCP server" depends on CMD_BOOTP +config CMD_PCAP + bool "pcap capture" + help + Selecting this will allow capturing all Ethernet packets and store + them in physical memory in a PCAP formated file, + later to be analyzed by PCAP reader application (IE. WireShark). + config BOOTP_PXE bool "Send PXE client arch to BOOTP/DHCP server" default y
cmd/net.c +63 -0
66 lines not on this page · raw message
include/net.h +56 -0
68 lines not on this page · raw message
net/Makefile +1 -0
@@ -20,6 +20,7 @@ obj-$(CONFIG_CMD_LINK_LOCAL) += link_local.o obj-$(CONFIG_NET) += net.o obj-$(CONFIG_CMD_NFS) += nfs.o obj-$(CONFIG_CMD_PING) += ping.o +obj-$(CONFIG_CMD_PCAP) += pcap.o obj-$(CONFIG_CMD_RARP) += rarp.o obj-$(CONFIG_CMD_SNTP) += sntp.o obj-$(CONFIG_CMD_TFTPBOOT) += tftp.o
net/net.c +8 -0
@@ -671,6 +671,11 @@ done:net_set_icmp_handler (NULL );#endif net_set_state (prev_net_state); + +#if defined(CONFIG_CMD_PCAP ) +if (pcap_active ()) +pcap_print_status (); +#endif return ret; }
@@ -1083,6 +1088,9 @@ void net_process_received_packet(uchar *in_packet, int len)debug_cond (DEBUG_NET_PKT ,"packet received\n" ); +#if defined(CONFIG_CMD_PCAP ) +pcap_post (in_packet, len, false); +#endif net_rx_packet = in_packet; net_rx_packet_len = len; et = (struct ethernet_hdr *)in_packet;
net/pcap.c new file +152 -0
152 lines not on this page · raw message
Signature · 1 line
2.22.0
PATCH 2/2 doc: pcap: add pcap cmd documentation
Add documentation for new "pcap" command.
--- doc/README.pcap | 61 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) create mode 100644 doc/README.pcap
doc/README.pcap new file +61 -0
@@ -0,0 +1,61 @@ +PCAP: + +U-boot supports live ethernet packet capture in PCAP(2.4) format. +This is enabled by CONFIG_CMD_PCAP. + +The capture is stored on physical memory, and should be copied to +a machine capabale of parsing and displaying PCAP files (IE. wireshark) +If networking works properly one can copy the capture file from physical memory +using tftpput, or save it to local storage with (sf write, mmc write, fatwrite, etc) + +the pcap capturing requires maximum buffer size. +when the buffer is full, packets will silently drop. +check the status using "pcap status" to see if the buffer is full, +if so, consider increasing the buffer size. + +Usage example: + +# Initialize pcap capture to physical address (0x100000) with maximum size of 100000. +# Start capture +pcap start + +# Initialize network activity +env set ipaddr 10.0.2.15; env set serverip 10.0.2.2; tftp uImage64 + +# Stop capture +pcap stop + +# pcap init 0x100000 100000 +PCAP capture initialized: addr: 0xffffffff80100000 max length: 100000 + +# pcap start +# env set ipaddr 10.0.2.15; env set serverip 10.0.2.2; tftp uImage64 +eth0 at 10000000: PHY present at 0 +eth0 at 10000000: link up, 1000Mbps full-duplex (lpa: 0x7c00) +Using eth0 at 10000000 device +TFTP from server 10.0.2.2; our IP address is 10.0.2.15 +Filename 'uImage64'. +Load address: 0xffffffff88000000 +Loading: ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + # + 18.2 MiB/s +done +Bytes transferred = 8359376 (7f8dd0 hex) +PCAP status: + Initialized addr: 0xffffffff80100000 max length: 100000 + Status: Active. file size: 99991 + Incoming packets: 66 Outgoing packets: 67 + !!! Buffer is full, consider increasing buffer size !!! + + +# pcap stop +# tftpput 0xffffffff80100000 100000 10.0.2.2:capture.pcap +
Signature · 1 line
2.22.0
PATCH v3 1/2 net: introduce packet capture support
In reply to Ramon FriedQuoted 51 lines · Ramon Fried
Add support for capturing ethernet packets and storing them in memory in PCAP(2.4) format, later to be analyzed by any PCAP viewer software (IE. Wireshark)
This feature greatly assist debugging network issues such as detecting dropped packets, packet corruption etc.
Signed-off-by Ramon Fried <[email protected]>Reviewed-by Alex Marginean <[email protected]>Tested-by Alex Marginean <[email protected]>---
v2: Fix type assignmnet to header.ts_sec
v3: Several suggestion changes by Bin and Alex:
* Change to implementation to command based.
* Added counters for incoming/outgoing packets.
* Support clearing the capture for multiple captures.
* Added documentation (separate patch).cmd/Kconfig | 7 +++ cmd/net.c | 63 +++++++++++++++++++++ include/net.h | 56 +++++++++++++++++++ net/Makefile | 1 + net/net.c | 8 +++ net/pcap.c | 152 ++++++++++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 287 insertions(+) create mode 100644 net/pcap.ccmd/Kconfig +7
-0@@ -1239,6 +1239,13 @@ config BOOTP_NTPSERVER bool "Request & store 'ntpserverip' from BOOTP/DHCP server" depends on CMD_BOOTP +config CMD_PCAP + bool "pcap capture" + help + Selecting this will allow capturing all Ethernet packets and store + them in physical memory in a PCAP formated file, + later to be analyzed by PCAP reader application (IE. WireShark). + config BOOTP_PXE bool "Send PXE client arch to BOOTP/DHCP server" default ycmd/net.c +0
-0
cmd/net.c U_BOOT_CMD( · line 461
Quoted 5 lines
cmd/net.c +2
-0@@ -457,3 +457,66 @@ U_BOOT_CMD( );#endif /* CONFIG_CMD_LINK_LOCAL */ + +#if defined(CONFIG_CMD_PCAP )
Please just move this to a separate cmd/pcap.c instead of this ifdef.
Quoted 66 lines
cmd/net.c +61
-0+static int do_pcap_init (cmd_tbl_t *cmdtp,int flag,int argc, +char *const argv[]) +{ +phys_addr_t addr; +unsigned int size; + +if (argc !=3 ) +return CMD_RET_USAGE ; + + addr =simple_strtoul (argv[1 ],NULL ,16 ); + size =simple_strtoul (argv[2 ],NULL ,10 ); + +return pcap_init (addr, size) ?CMD_RET_FAILURE :CMD_RET_SUCCESS ; +} + +static int do_pcap_start (cmd_tbl_t *cmdtp,int flag,int argc, +char *const argv[]) +{ +return pcap_start_stop (true) ?CMD_RET_FAILURE :CMD_RET_SUCCESS ; +} + +static int do_pcap_stop (cmd_tbl_t *cmdtp,int flag,int argc, +char *const argv[]) +{ +return pcap_start_stop (false) ?CMD_RET_FAILURE :CMD_RET_SUCCESS ; +} + +static int do_pcap_status (cmd_tbl_t *cmdtp,int flag,int argc, +char *const argv[]) +{ +return pcap_print_status () ?CMD_RET_FAILURE :CMD_RET_SUCCESS ; +} + +static int do_pcap_clear (cmd_tbl_t *cmdtp,int flag,int argc, +char *const argv[]) +{ +return pcap_clear () ?CMD_RET_FAILURE :CMD_RET_SUCCESS ; +} + +static char pcap_help_text[] = +"- network packet capture\n\n" +"pcap\n" +"pcap init\t\t\t<addr> <max_size>\n" +"pcap start\t\t\tstart capture\n" +"pcap stop\t\t\tstop capture\n" +"pcap status\t\t\tprint status\n" +"pcap clear\t\t\tclear capture buffer\n" +"\n" +"With:\n" +"\t<addr>: user address to which pcap will be stored (hexedcimal)\n" +"\t<max_size>: Maximum size of pcap file (decimal)\n" +"\n" ; + +U_BOOT_CMD_WITH_SUBCMDS (pcap,"pcap" , pcap_help_text, +U_BOOT_SUBCMD_MKENT (init,3 ,0 , do_pcap_init), +U_BOOT_SUBCMD_MKENT (start,1 ,0 , do_pcap_start), +U_BOOT_SUBCMD_MKENT (stop,1 ,0 , do_pcap_stop), +U_BOOT_SUBCMD_MKENT (status,1 ,0 , do_pcap_status), + U_BOOT_SUBCMD_MKENT(clear, 1, 0, do_pcap_clear), +); +#endif /* CONFIG_CMD_PCAP */ include/net.h +0
-0
include/net.h bool arp_is_waiting(void); /* Waiting for ARP reply? */ · line 633
Quoted 4 lines
include/net.h +1
-0@@ -630,6 +630,58 @@ bool arp_is_waiting(void); /* Waiting for ARP reply? */void net_set_icmp_handler (rxhand_icmp_f *f);/* Set ICMP RX handler */ void net_set_timeout_handler (ulong ,thand_f *);/* Set timeout handler */ +/* PCAP extension */
Please put this stuff in include/net/pcap.h
Quoted 55 lines
include/net.h +51
-0+ +/** +* pcap_init() - Initialize PCAP memory buffer +* +* @paddr physicaly memory address to store buffer +* @size maximum size of capture file in memory +* +* @return 0 on success, -ERROR on error +*/ +int pcap_init (phys_addr_t paddr,unsigned long size); + +/** +* pcap_start_stop() - start / stop pcap capture +* +* @start if true, start capture if false stop capture +* +* @return 0 on success, -ERROR on error +*/ +int pcap_start_stop (bool start); + +/** +* pcap_clear() - clear pcap capture buffer and statistics +* +* @return 0 on success, -ERROR on error +*/ +int pcap_clear (void ); + +/** +* pcap_print_status() - print status of pcap capture +* +* @return 0 on success, -ERROR on error +*/ +int pcap_print_status (void ); + +/** +* pcap_active() - check if pcap is enabled +* +* @return TRUE if active, FALSE if not. +*/ +bool pcap_active (void ); + +/** +* pcap_post() - Post a packet to PCAP file +* +* @packet: packet to post +* @len: packet length in bytes +* @outgoing packet direction (outgoing/incoming) +* @return 0 on success, -ERROR on error +*/ +int pcap_post (const void *packet,size_t len,bool outgoing); +/* Network loop state */ enum net_loop_state {NETLOOP_CONTINUE ,
include/net.h static inline void net_send_packet(uchar *pkt, int len) · line 715
Quoted 6 lines
include/net.h +3
-0@@ -658,6 +710,10 @@ static inline void net_send_packet(uchar *pkt, int len) {/* Currently no way to return errors from eth_send() */ (void )eth_send (pkt, len); + +#if defined(CONFIG_CMD_PCAP ) +pcap_post (pkt, len, true);
Maybe move this call inside of eth_send().
net/Makefile obj-$(CONFIG_CMD_LINK_LOCAL) += link_local.o · line 23
Quoted 13 lines
include/net.h +1
-0+#endif }/* net/Makefile +1
-0@@ -20,6 +20,7 @@ obj-$(CONFIG_CMD_LINK_LOCAL) += link_local.o obj-$(CONFIG_NET) += net.o obj-$(CONFIG_CMD_NFS) += nfs.o obj-$(CONFIG_CMD_PING) += ping.o +obj-$(CONFIG_CMD_PCAP) += pcap.o
Please maintain alpha order.
Quoted 133 lines
net/Makefile +0
-0obj-$(CONFIG_CMD_RARP) += rarp.o obj-$(CONFIG_CMD_SNTP) += sntp.o obj-$(CONFIG_CMD_TFTPBOOT) += tftp.onet/net.c +8
-0@@ -671,6 +671,11 @@ done:net_set_icmp_handler (NULL );#endif net_set_state (prev_net_state); + +#if defined(CONFIG_CMD_PCAP ) +if (pcap_active ()) +pcap_print_status (); +#endif return ret; }@@ -1083,6 +1088,9 @@ void net_process_received_packet(uchar *in_packet, int len)debug_cond (DEBUG_NET_PKT ,"packet received\n" ); +#if defined(CONFIG_CMD_PCAP ) +pcap_post (in_packet, len, false); +#endif net_rx_packet = in_packet; net_rx_packet_len = len; et = (struct ethernet_hdr *)in_packet;net/pcap.c new file +98
-0@@ -0,0 +1,152 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright 2019 Ramon Fried <[email protected]> +*/ + +#include <common.h> +#include <net.h> +#include <time.h> +#include <asm/io.h> + +#define LINKTYPE_ETHERNET 1 + +static bool initialized; +static bool running; +static bool buffer_full; +static void *buf; +static unsigned int max_size; +static unsigned int pos; + +static unsigned long incoming_count; +static unsigned long outgoing_count; + +struct pcap_header { +u32 magic; +u16 version_major; +u16 version_minor; +s32 thiszone; +u32 sigfigs; +u32 snaplen; +u32 network; +}; + +struct pcap_packet_header { +u32 ts_sec; +u32 ts_usec; +u32 incl_len; +u32 orig_len; +}; + +static struct pcap_header file_header = { + .magic =0xa1b2c3d4 , + .version_major =2 , + .version_minor =4 , + .snaplen =65535 , + .network =LINKTYPE_ETHERNET , +}; + +int pcap_init (phys_addr_t paddr,unsigned long size) +{ + buf =map_physmem (paddr, size,0 ); +if (!buf) { +printf ("Failed mapping PCAP memory\n" ); +return -ENOMEM ; + } + +printf ("PCAP capture initialized: addr: 0x%lx max length: %lu\n" , + (unsigned long )buf, size); + +memcpy (buf, &file_header,sizeof (file_header)); + pos =sizeof (file_header); + max_size = size; + initialized = true; + running = false; + buffer_full = false; + incoming_count =0 ; + outgoing_count =0 ; +return 0 ; +} + +int pcap_start_stop (bool start) +{ +if (!initialized) { +printf ("error: pcap was not initialized\n" ); +return -ENODEV ; + } + + running = start; + +return 0 ; +} + +int pcap_clear (void ) +{ +if (!initialized) { +printf ("error: pcap was not initialized\n" ); +return -ENODEV ; + } + + pos =sizeof (file_header); + incoming_count =0 ; + outgoing_count =0 ; + buffer_full = false; + +printf ("pcap capture cleared\n" ); +return 0 ; +} + +int pcap_post (const void *packet,size_t len,bool outgoing)
net/pcap.c line 108
Quoted 10 lines
net/pcap.c new file +10
-0+{ +struct pcap_packet_header header; +u64 cur_time =timer_get_us (); + +if (!initialized || !running || !buf) +return -ENODEV ; + +if ((pos + len +sizeof (header)) >= max_size) { + buffer_full = true; +return -ENOMEM ;
It seems like an error should be printed the first time the limit is hit, not just wait until a status is requested.
net/pcap.c line 119
Quoted 11 lines
net/pcap.c new file +11
-0+ } + + header.ts_sec = cur_time /1000000 ; + header.ts_usec = cur_time %1000000 ; + header.incl_len = len; + header.orig_len = len; + +memcpy (buf + pos, &header,sizeof (header)); + pos +=sizeof (header); +memcpy (buf + pos, packet, len); + pos += len;
You should also provide an env variable of the size so that users can use that to write to a file.
Something like: env_set_hex("pcapsize", pos);
Quoted 40 lines
net/pcap.c new file +33
-1+ +if (outgoing) + outgoing_count++; +else + incoming_count++; + +return 0 ; +} + +int pcap_print_status (void ) +{ +if (!initialized) { +printf ("pcap was not initialized\n" ); +return -ENODEV ; + } +printf ("PCAP status:\n" ); +printf ("\tInitialized addr: 0x%lx\tmax length: %u\n" , + (unsigned long )buf, max_size); +printf ("\tStatus: %s.\t file size: %u\n" , running ?"Active" :"Idle" , + pos); +printf ("\tIncoming packets: %lu Outgoing packets: %lu\n" , + incoming_count, outgoing_count); + +if (buffer_full) +printf ("\t!!! Buffer is full, consider increasing buffer size !!!\n" ); + +return 0 ; +} + +bool pcap_active (void ) +{ +return running; +} --2.22.0
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
PATCH v3 1/2 net: introduce packet capture support
In reply to Ramon FriedQuoted 11 lines · Ramon Fried
Add support for capturing ethernet packets and storing them in memory in PCAP(2.4) format, later to be analyzed by any PCAP viewer software (IE. Wireshark)
This feature greatly assist debugging network issues such as detecting dropped packets, packet corruption etc.
Signed-off-by Ramon Fried <[email protected]>Reviewed-by Alex Marginean <[email protected]>Tested-by Alex Marginean <[email protected]>
This is a nice feature to have. We need a unit test for it, though. Please add it to a sandbox test and exercise it, then have the test try to load the resulting file with tshark to ensure a valid format. There are potentially other things in the header that is printed that can be used for further validation.
Thanks for this feature.
-Joe
PATCH v3 1/2 net: introduce packet capture support
In reply to Joe HershbergerQuoted 53 lines · Joe Hershberger
Quoted 52 lines · Ramon Fried
Add support for capturing ethernet packets and storing them in memory in PCAP(2.4) format, later to be analyzed by any PCAP viewer software (IE. Wireshark)
This feature greatly assist debugging network issues such as detecting dropped packets, packet corruption etc.
Signed-off-by Ramon Fried <[email protected]>Reviewed-by Alex Marginean <[email protected]>Tested-by Alex Marginean <[email protected]>---
v2: Fix type assignmnet to header.ts_sec
v3: Several suggestion changes by Bin and Alex:
* Change to implementation to command based.
* Added counters for incoming/outgoing packets.
* Support clearing the capture for multiple captures.
* Added documentation (separate patch).cmd/Kconfig | 7 +++ cmd/net.c | 63 +++++++++++++++++++++ include/net.h | 56 +++++++++++++++++++ net/Makefile | 1 + net/net.c | 8 +++ net/pcap.c | 152 ++++++++++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 287 insertions(+) create mode 100644 net/pcap.ccmd/Kconfig +7
-0@@ -1239,6 +1239,13 @@ config BOOTP_NTPSERVER bool "Request & store 'ntpserverip' from BOOTP/DHCP server" depends on CMD_BOOTP +config CMD_PCAP + bool "pcap capture" + help + Selecting this will allow capturing all Ethernet packets and store + them in physical memory in a PCAP formated file, + later to be analyzed by PCAP reader application (IE. WireShark). + config BOOTP_PXE bool "Send PXE client arch to BOOTP/DHCP server" default ycmd/net.c +0
-0@@ -457,3 +457,66 @@ U_BOOT_CMD( );
Quoted 5 lines
cmd/net.c U_BOOT_CMD( · line 461
Quoted 3 lines
cmd/net.c +2
-0#endif /* CONFIG_CMD_LINK_LOCAL */ + +#if defined(CONFIG_CMD_PCAP )Please just move this to a separate
cmd/pcap.cinstead of this ifdef.
NP
Quoted 69 lines
Quoted 69 lines
cmd/net.c +61
-0+static int do_pcap_init (cmd_tbl_t *cmdtp,int flag,int argc, +char *const argv[]) +{ +phys_addr_t addr; +unsigned int size; + +if (argc !=3 ) +return CMD_RET_USAGE ; + + addr =simple_strtoul (argv[1 ],NULL ,16 ); + size =simple_strtoul (argv[2 ],NULL ,10 ); + +return pcap_init (addr, size) ?CMD_RET_FAILURE :CMD_RET_SUCCESS ; +} + +static int do_pcap_start (cmd_tbl_t *cmdtp,int flag,int argc, +char *const argv[]) +{ +return pcap_start_stop (true) ?CMD_RET_FAILURE :CMD_RET_SUCCESS ; +} + +static int do_pcap_stop (cmd_tbl_t *cmdtp,int flag,int argc, +char *const argv[]) +{ +return pcap_start_stop (false) ?CMD_RET_FAILURE :CMD_RET_SUCCESS ; +} + +static int do_pcap_status (cmd_tbl_t *cmdtp,int flag,int argc, +char *const argv[]) +{ +return pcap_print_status () ?CMD_RET_FAILURE :CMD_RET_SUCCESS ; +} + +static int do_pcap_clear (cmd_tbl_t *cmdtp,int flag,int argc, +char *const argv[]) +{ +return pcap_clear () ?CMD_RET_FAILURE :CMD_RET_SUCCESS ; +} + +static char pcap_help_text[] = +"- network packet capture\n\n" +"pcap\n" +"pcap init\t\t\t<addr> <max_size>\n" +"pcap start\t\t\tstart capture\n" +"pcap stop\t\t\tstop capture\n" +"pcap status\t\t\tprint status\n" +"pcap clear\t\t\tclear capture buffer\n" +"\n" +"With:\n" +"\t<addr>: user address to which pcap will be stored (hexedcimal)\n" +"\t<max_size>: Maximum size of pcap file (decimal)\n" +"\n" ; + +U_BOOT_CMD_WITH_SUBCMDS (pcap,"pcap" , pcap_help_text, +U_BOOT_SUBCMD_MKENT (init,3 ,0 , do_pcap_init), +U_BOOT_SUBCMD_MKENT (start,1 ,0 , do_pcap_start), +U_BOOT_SUBCMD_MKENT (stop,1 ,0 , do_pcap_stop), +U_BOOT_SUBCMD_MKENT (status,1 ,0 , do_pcap_status), + U_BOOT_SUBCMD_MKENT(clear, 1, 0, do_pcap_clear), +); +#endif /* CONFIG_CMD_PCAP */ include/net.h +0
-0@@ -630,6 +630,58 @@ bool arp_is_waiting(void); /* Waiting for ARP reply? */void net_set_icmp_handler (rxhand_icmp_f *f);/* Set ICMP RX handler */ void net_set_timeout_handler (ulong ,thand_f *);/* Set timeout handler */
Quoted 3 lines
include/net.h bool arp_is_waiting(void); /* Waiting for ARP reply? */ · line 633
Quoted 1 line
include/net.h +1
-0+/* PCAP extension */ Please put this stuff in
include/net/pcap.h
NP
Quoted 55 lines
Quoted 55 lines
include/net.h +51
-0+ +/** +* pcap_init() - Initialize PCAP memory buffer +* +* @paddr physicaly memory address to store buffer +* @size maximum size of capture file in memory +* +* @return 0 on success, -ERROR on error +*/ +int pcap_init (phys_addr_t paddr,unsigned long size); + +/** +* pcap_start_stop() - start / stop pcap capture +* +* @start if true, start capture if false stop capture +* +* @return 0 on success, -ERROR on error +*/ +int pcap_start_stop (bool start); + +/** +* pcap_clear() - clear pcap capture buffer and statistics +* +* @return 0 on success, -ERROR on error +*/ +int pcap_clear (void ); + +/** +* pcap_print_status() - print status of pcap capture +* +* @return 0 on success, -ERROR on error +*/ +int pcap_print_status (void ); + +/** +* pcap_active() - check if pcap is enabled +* +* @return TRUE if active, FALSE if not. +*/ +bool pcap_active (void ); + +/** +* pcap_post() - Post a packet to PCAP file +* +* @packet: packet to post +* @len: packet length in bytes +* @outgoing packet direction (outgoing/incoming) +* @return 0 on success, -ERROR on error +*/ +int pcap_post (const void *packet,size_t len,bool outgoing); +/* Network loop state */ enum net_loop_state {NETLOOP_CONTINUE ,@@ -658,6 +710,10 @@ static inline void net_send_packet(uchar *pkt, int len)
Quoted 8 lines
include/net.h static inline void net_send_packet(uchar *pkt, int len) · line 715
Quoted 6 lines
include/net.h +3
-0{/* Currently no way to return errors from eth_send() */ (void )eth_send (pkt, len); + +#if defined(CONFIG_CMD_PCAP ) +pcap_post (pkt, len, true);Maybe move this call inside of
eth_send().
NP
Quoted 15 lines
net/Makefile obj-$(CONFIG_CMD_LINK_LOCAL) += link_local.o · line 23
Quoted 13 lines
include/net.h +1
-0+#endif }/* net/Makefile +1
-0@@ -20,6 +20,7 @@ obj-$(CONFIG_CMD_LINK_LOCAL) += link_local.o obj-$(CONFIG_NET) += net.o obj-$(CONFIG_CMD_NFS) += nfs.o obj-$(CONFIG_CMD_PING) += ping.o +obj-$(CONFIG_CMD_PCAP) += pcap.oPlease maintain alpha order.
NP
Quoted 138 lines
Quoted 138 lines
net/Makefile +0
-0obj-$(CONFIG_CMD_RARP) += rarp.o obj-$(CONFIG_CMD_SNTP) += sntp.o obj-$(CONFIG_CMD_TFTPBOOT) += tftp.onet/net.c +8
-0@@ -671,6 +671,11 @@ done:net_set_icmp_handler (NULL );#endif net_set_state (prev_net_state); + +#if defined(CONFIG_CMD_PCAP ) +if (pcap_active ()) +pcap_print_status (); +#endif return ret; }@@ -1083,6 +1088,9 @@ void net_process_received_packet(uchar *in_packet, int len)debug_cond (DEBUG_NET_PKT ,"packet received\n" ); +#if defined(CONFIG_CMD_PCAP ) +pcap_post (in_packet, len, false); +#endif net_rx_packet = in_packet; net_rx_packet_len = len; et = (struct ethernet_hdr *)in_packet;net/pcap.c new file +103
-0@@ -0,0 +1,152 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright 2019 Ramon Fried <[email protected]> +*/ + +#include <common.h> +#include <net.h> +#include <time.h> +#include <asm/io.h> + +#define LINKTYPE_ETHERNET 1 + +static bool initialized; +static bool running; +static bool buffer_full; +static void *buf; +static unsigned int max_size; +static unsigned int pos; + +static unsigned long incoming_count; +static unsigned long outgoing_count; + +struct pcap_header { +u32 magic; +u16 version_major; +u16 version_minor; +s32 thiszone; +u32 sigfigs; +u32 snaplen; +u32 network; +}; + +struct pcap_packet_header { +u32 ts_sec; +u32 ts_usec; +u32 incl_len; +u32 orig_len; +}; + +static struct pcap_header file_header = { + .magic =0xa1b2c3d4 , + .version_major =2 , + .version_minor =4 , + .snaplen =65535 , + .network =LINKTYPE_ETHERNET , +}; + +int pcap_init (phys_addr_t paddr,unsigned long size) +{ + buf =map_physmem (paddr, size,0 ); +if (!buf) { +printf ("Failed mapping PCAP memory\n" ); +return -ENOMEM ; + } + +printf ("PCAP capture initialized: addr: 0x%lx max length: %lu\n" , + (unsigned long )buf, size); + +memcpy (buf, &file_header,sizeof (file_header)); + pos =sizeof (file_header); + max_size = size; + initialized = true; + running = false; + buffer_full = false; + incoming_count =0 ; + outgoing_count =0 ; +return 0 ; +} + +int pcap_start_stop (bool start) +{ +if (!initialized) { +printf ("error: pcap was not initialized\n" ); +return -ENODEV ; + } + + running = start; + +return 0 ; +} + +int pcap_clear (void ) +{ +if (!initialized) { +printf ("error: pcap was not initialized\n" ); +return -ENODEV ; + } + + pos =sizeof (file_header); + incoming_count =0 ; + outgoing_count =0 ; + buffer_full = false; + +printf ("pcap capture cleared\n" ); +return 0 ; +} + +int pcap_post (const void *packet,size_t len,bool outgoing) +{ +struct pcap_packet_header header; +u64 cur_time =timer_get_us (); + +if (!initialized || !running || !buf)
Quoted 8 lines
net/pcap.c line 108
Quoted 5 lines
net/pcap.c new file +5
-0+return -ENODEV ; + +if ((pos + len +sizeof (header)) >= max_size) { + buffer_full = true; +return -ENOMEM ;It seems like an error should be printed the first time the limit is hit, not just wait until a status is requested.
Printing error on the first time was my initial implementation. problem is that it's printed along with other ####### that tftp uses. This doesn't look nice. what do you think ?
Quoted 6 lines
Quoted 6 lines
net/pcap.c new file +6
-0+ } + + header.ts_sec = cur_time /1000000 ; + header.ts_usec = cur_time %1000000 ; + header.incl_len = len; + header.orig_len = len;
Quoted 8 lines
net/pcap.c line 119
Quoted 5 lines
net/pcap.c new file +5
-0+ +memcpy (buf + pos, &header,sizeof (header)); + pos +=sizeof (header); +memcpy (buf + pos, packet, len); + pos += len;You should also provide an env variable of the size so that users can use that to write to a file.
That's really nice, didn't think about it.
Quoted 42 lines
Something like:
env_set_hex("pcapsize", pos);Quoted 40 lines
net/pcap.c new file +33
-1+ +if (outgoing) + outgoing_count++; +else + incoming_count++; + +return 0 ; +} + +int pcap_print_status (void ) +{ +if (!initialized) { +printf ("pcap was not initialized\n" ); +return -ENODEV ; + } +printf ("PCAP status:\n" ); +printf ("\tInitialized addr: 0x%lx\tmax length: %u\n" , + (unsigned long )buf, max_size); +printf ("\tStatus: %s.\t file size: %u\n" , running ?"Active" :"Idle" , + pos); +printf ("\tIncoming packets: %lu Outgoing packets: %lu\n" , + incoming_count, outgoing_count); + +if (buffer_full) +printf ("\t!!! Buffer is full, consider increasing buffer size !!!\n" ); + +return 0 ; +} + +bool pcap_active (void ) +{ +return running; +} --2.22.0
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
PATCH v3 1/2 net: introduce packet capture support
Quoted 13 lines · Ramon Fried
Quoted 11 lines · Joe Hershberger
Quoted 10 lines · Ramon Fried
Add support for capturing ethernet packets and storing them in memory in PCAP(2.4) format, later to be analyzed by any PCAP viewer software (IE. Wireshark)
This feature greatly assist debugging network issues such as detecting dropped packets, packet corruption etc.
Signed-off-by Ramon Fried <[email protected]>Reviewed-by Alex Marginean <[email protected]>Tested-by Alex Marginean <[email protected]>
[ ... ]
Quoted 5 lines
Quoted 2 lines
It seems like an error should be printed the first time the limit is hit, not just wait until a status is requested.
Printing error on the first time was my initial implementation. problem is that it's printed along with other ####### that tftp uses. This doesn't look nice. what do you think ?
I think this should be an uncommon enough of an issue that it's OK to break up the #####.
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
net/pcap.c new file +11
-0+ } + + header.ts_sec = cur_time /1000000 ; + header.ts_usec = cur_time %1000000 ; + header.incl_len = len; + header.orig_len = len; + +memcpy (buf + pos, &header,sizeof (header)); + pos +=sizeof (header); +memcpy (buf + pos, packet, len); + pos += len;
[ ... ]
PATCH v3 1/2 net: introduce packet capture support
In reply to Joe HershbergerQuoted 14 lines · Joe Hershberger
Quoted 11 lines · Ramon Fried
Add support for capturing ethernet packets and storing them in memory in PCAP(2.4) format, later to be analyzed by any PCAP viewer software (IE. Wireshark)
This feature greatly assist debugging network issues such as detecting dropped packets, packet corruption etc.
Signed-off-by Ramon Fried <[email protected]>Reviewed-by Alex Marginean <[email protected]>Tested-by Alex Marginean <[email protected]>
Quoted 5 lines
This is a nice feature to have. We need a unit test for it, though. Please add it to a sandbox test and exercise it, then have the test try to load the resulting file with tshark to ensure a valid format. There are potentially other things in the header that is printed that can be used for further validation.
Hi Joe,
I fixed all your notes regarding the patches, except the test.
I thought I'll find some net framework to start with, but I didn't find any tests under u-boot/tests/* that actually transfer a file between the host and u-boot sandbox.
Did I miss anything ?
I did find something interesting under u-boot/api/api_net.c that can perhaps be leveraged to something like that.
Do you know how to begin with a test you described above ? Meanwhile, I posted the updated patches (without the test) so they can be reviewed by you.
Thanks,
Ramon.
Quoted 3 lines
Thanks for this feature.
-Joe
PATCH v3 1/2 net: introduce packet capture support
Quoted 21 lines · Ramon Fried
Quoted 14 lines · Joe Hershberger
Quoted 11 lines · Ramon Fried
Add support for capturing ethernet packets and storing them in memory in PCAP(2.4) format, later to be analyzed by any PCAP viewer software (IE. Wireshark)
This feature greatly assist debugging network issues such as detecting dropped packets, packet corruption etc.
Signed-off-by Ramon Fried <[email protected]>Reviewed-by Alex Marginean <[email protected]>Tested-by Alex Marginean <[email protected]>Quoted 5 lines
This is a nice feature to have. We need a unit test for it, though. Please add it to a sandbox test and exercise it, then have the test try to load the resulting file with tshark to ensure a valid format. There are potentially other things in the header that is printed that can be used for further validation.
Quoted 6 lines
Hi Joe,
I fixed all your notes regarding the patches, except the test. I thought I'll find some net framework to start with, but I didn't find any tests under u-boot/tests/* that actually transfer a file between the host and u-boot sandbox.
Did I miss anything ?
I'm not sure if it's appropriate but maybe a sandbox test like test/dm/eth.c.
Quoted 2 lines
I did find something interesting under
u-boot/api/api_net.cthat can perhaps be leveraged to something like that.
Probably not, but maybe if you elaborate a bit more about what you have in mind.
Quoted 13 lines
Do you know how to begin with a test you described above ? Meanwhile, I posted the updated patches (without the test) so they can be reviewed by you.
Thanks,
Ramon.Quoted 3 lines
Thanks for this feature.
-Joe_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot