ARM: da850-evm: Remove repeated pinmuxing calls
PATCH 1/1 ARM: da850-evm: Remove repeated pinmuxing calls
arch_cpu_init() initializes the pinmuxing which is called fairly early in the start sequences, so the board_init function doesn't need to do it again. This patch removes the call from board_init.
Signed-off-by Adam Ford <[email protected]>
board/davinci/da8xxevm/da850evm.c +0 -4
@@ -344,10 +344,6 @@ int board_init(void) DAVINCI_SYSCFG_SUSPSRC_UART2), &davinci_syscfg_regs->suspsrc); -/* configure pinmux settings */ -if (davinci_configure_pin_mux_items (pinmuxes,ARRAY_SIZE (pinmuxes))) -return 1 ; -#ifdef CONFIG_USE_NOR /* Set the GPIO direction as output */ clrbits_le32 ((u32 *)GPIO_BANK0_REG_DIR_ADDR , (0x01 <<11 ));
Signature · 1 line
2.17.1
PATCH 1/1 ARM: da850-evm: Remove repeated pinmuxing calls
board/davinci/da8xxevm/da850evm.c
Quoted 8 lines · Adam Ford
arch_cpu_init()initializes the pinmuxing which is called fairly early in the start sequences, so theboard_initfunction doesn't need to do it again. This patch removes the call fromboard_init.Signed-off-by Adam Ford <[email protected]>board/davinci/da8xxevm/da850evm.c +0
-0
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190728/977f6401/attachment.sig>