Skip to contentSkip to conversation

5.1.15-stable review

PATCH In review Greg Kroah-Hartman 6 participants 133 messages Jun 24, 2019 – Jun 26, 2019

Subsystems (7)
Stable branch Kselftest MIPS RISC-V +3 more subsystems
lore
Share & tools
lore
author maintainer
#44 lore raw

PATCH 44/121 fpga: stratix10-soc: fix use-after-free on s10_init()

In reply to Greg Kroah-Hartman

[ Upstream commit f5dd87326fefe42a4b1a4b1a1a695060c33a88d6 ]

The refcount of fw_np has already been decreased by of_find_matching_node() so it shouldn't be used anymore.
This patch adds an of_node_get() before of_find_matching_node() to avoid the use-after-free problem.

Fixes e7eef1d7633a ("fpga: add intel stratix10 soc fpga manager driver")
Cc Alan Tull <[email protected]>
Cc Moritz Fischer <[email protected]>
Cc Nicolas Saenz Julienne <[email protected]>
---
 drivers/fpga/stratix10-soc.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/fpga/stratix10-soc.c +5 -1
index 13851b3d1c56..215d33789c74 100644
@@ -507,12 +507,16 @@ static int __init s10_init(void)
 	if (!fw_np)
 		return -ENODEV;
 
+	of_node_get(fw_np);
 	np = of_find_matching_node(fw_np, s10_of_match);
-	if (!np)
+	if (!np) {
+		of_node_put(fw_np);
 		return -ENODEV;
+	}
 
 	of_node_put(np);
 	ret = of_platform_populate(fw_np, s10_of_match, NULL, NULL);
+	of_node_put(fw_np);
 	if (ret)
 		return ret;
 
Signature · 1 line
2.20.1
author maintainer
#1 lore raw

PATCH 1/121 tracing: Silence GCC 9 array bounds warning

In reply to Greg Kroah-Hartman

From: Miguel Ojeda <[email protected]>

commit 0c97bf863efce63d6ab7971dad811601e6171d2f upstream.

Starting with GCC 9, -Warray-bounds detects cases when memset is called starting on a member of a struct but the size to be cleared ends up writing over further members.

Such a call happens in the trace code to clear, at once, all members after and including seq on struct trace_iterator:

In function 'memset',
inlined from 'ftrace_dump' at kernel/trace/trace.c:8914:3:
./include/linux/string.h:344:9: warning: '__builtin_memset' offset [8505, 8560] from the object at 'iter' is out of the bounds of referenced subobject 'seq' with type 'struct trace_seq' at offset 4368 [-Warray-bounds]
344 | return __builtin_memset(p, c, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~

In order to avoid GCC complaining about it, we compute the address ourselves by adding the offsetof distance instead of referring directly to the member.

Since there are two places doing this clear (trace.c and trace_kdb.c), take the chance to move the workaround into a single place in the internal header.

[ Removed unnecessary parenthesis around "iter" ]
---
 kernel/trace/trace.c     |    6 +-----
 kernel/trace/trace.h     |   18 ++++++++++++++++++
 kernel/trace/trace_kdb.c |    6 +-----
 3 files changed, 20 insertions(+), 10 deletions(-)
kernel/trace/trace.c +1 -5
@@ -8627,12 +8627,8 @@ void ftrace_dump(enum ftrace_dump_mode o
 
 		cnt++;
 
-		/* reset all but tr, trace, and overruns */
-		memset(&iter.seq, 0,
-		       sizeof(struct trace_iterator) -
-		       offsetof(struct trace_iterator, seq));
+		trace_iterator_reset(&iter);
 		iter.iter_flags |= TRACE_FILE_LAT_FMT;
-		iter.pos = -1;
 
 		if (trace_find_next_entry_inc(&iter) != NULL) {
 			int ret;
kernel/trace/trace.h +18 -0
@@ -1964,4 +1964,22 @@ static inline void tracer_hardirqs_off(u
 
 extern struct trace_iterator *tracepoint_print_iter;
 
+/*
+ * Reset the state of the trace_iterator so that it can read consumed data.
+ * Normally, the trace_iterator is used for reading the data when it is not
+ * consumed, and must retain state.
+ */
+static __always_inline void trace_iterator_reset(struct trace_iterator *iter)
+{
+	const size_t offset = offsetof(struct trace_iterator, seq);
+
+	/*
+	 * Keep gcc from complaining about overwriting more than just one
+	 * member in the structure.
+	 */
+	memset((char *)iter + offset, 0, sizeof(struct trace_iterator) - offset);
+
+	iter->pos = -1;
+}
+
 #endif /* _LINUX_KERNEL_TRACE_H */
kernel/trace/trace_kdb.c +1 -5
@@ -41,12 +41,8 @@ static void ftrace_dump_buf(int skip_lin
 
 	kdb_printf("Dumping ftrace buffer:\n");
 
-	/* reset all but tr, trace, and overruns */
-	memset(&iter.seq, 0,
-		   sizeof(struct trace_iterator) -
-		   offsetof(struct trace_iterator, seq));
+	trace_iterator_reset(&iter);
 	iter.iter_flags |= TRACE_FILE_LAT_FMT;
-	iter.pos = -1;
 
 	if (cpu_file == RING_BUFFER_ALL_CPUS) {
 		for_each_tracing_cpu(cpu) {
author maintainer
#11 lore raw

PATCH 11/121 xhci: detect USB 3.2 capable host controllers correctly

In reply to Greg Kroah-Hartman

From: Mathias Nyman <[email protected]>

commit ddd57980a0fde30f7b5d14b888a2cc84d01610e8 upstream.

USB 3.2 capability in a host can be detected from the xHCI Supported Protocol Capability major and minor revision fields.

If major is 0x3 and minor 0x20 then the host is USB 3.2 capable.

For USB 3.2 capable hosts set the root hub lane count to 2.

The Major Revision and Minor Revision fields contain a BCD version number. The value of the Major Revision field is JJh and the value of the Minor Revision field is MNh for version JJ.M.N, where JJ = major revision number, M - minor version number, N = sub-minor version number,
e.g. version 3.1 is represented with a value of 0310h.

Also fix the extra whitespace printed out when announcing regular SuperSpeed hosts.

---
 drivers/usb/host/xhci.c |   20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)
drivers/usb/host/xhci.c +15 -5
@@ -5029,16 +5029,26 @@ int xhci_gen_setup(struct usb_hcd *hcd,
 	} else {
 		/*
 		 * Some 3.1 hosts return sbrn 0x30, use xhci supported protocol
-		 * minor revision instead of sbrn
+		 * minor revision instead of sbrn. Minor revision is a two digit
+		 * BCD containing minor and sub-minor numbers, only show minor.
 		 */
-		minor_rev = xhci->usb3_rhub.min_rev;
-		if (minor_rev) {
+		minor_rev = xhci->usb3_rhub.min_rev / 0x10;
+
+		switch (minor_rev) {
+		case 2:
+			hcd->speed = HCD_USB32;
+			hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS;
+			hcd->self.root_hub->rx_lanes = 2;
+			hcd->self.root_hub->tx_lanes = 2;
+			break;
+		case 1:
 			hcd->speed = HCD_USB31;
 			hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS;
+			break;
 		}
-		xhci_info(xhci, "Host supports USB 3.%x %s SuperSpeed\n",
+		xhci_info(xhci, "Host supports USB 3.%x %sSuperSpeed\n",
 			  minor_rev,
-			  minor_rev ? "Enhanced" : "");
+			  minor_rev ? "Enhanced " : "");
 
 		xhci->usb3_rhub.hcd = hcd;
 		/* xHCI private pointer was set in xhci_pci_probe for the second
author maintainer
#13 lore raw

PATCH 13/121 cifs: add spinlock for the openFileList to cifsInodeInfo

In reply to Greg Kroah-Hartman

From: Ronnie Sahlberg <[email protected]>

commit 487317c99477d00f22370625d53be3239febabbe upstream.

We can not depend on the tcon->open_file_lock here since in multiuser mode we may have the same file/inode open via multiple different tcons.

The current code is race prone and will crash if one user deletes a file at the same time a different user opens/create the file.

To avoid this we need to have a spinlock attached to the inode and not the tcon.

RHBZ: 1580165

---
 fs/cifs/cifsfs.c   |    1 +
 fs/cifs/cifsglob.h |    5 +++++
 fs/cifs/file.c     |    8 ++++++--
 3 files changed, 12 insertions(+), 2 deletions(-)
fs/cifs/cifsfs.c +1 -0
@@ -303,6 +303,7 @@ cifs_alloc_inode(struct super_block *sb)
 	cifs_inode->uniqueid = 0;
 	cifs_inode->createtime = 0;
 	cifs_inode->epoch = 0;
+	spin_lock_init(&cifs_inode->open_file_lock);
 	generate_random_uuid(cifs_inode->lease_key);
 
 	/*
fs/cifs/cifsglob.h +5 -0
@@ -1357,6 +1357,7 @@ struct cifsInodeInfo {
 	struct rw_semaphore lock_sem;	/* protect the fields above */
 	/* BB add in lists for dirty pages i.e. write caching info for oplock */
 	struct list_head openFileList;
+	spinlock_t	open_file_lock;	/* protects openFileList */
 	__u32 cifsAttrs; /* e.g. DOS archive bit, sparse, compressed, system */
 	unsigned int oplock;		/* oplock/lease level we have */
 	unsigned int epoch;		/* used to track lease state changes */
@@ -1760,10 +1761,14 @@ require use of the stronger protocol */
  *  tcp_ses_lock protects:
  *	list operations on tcp and SMB session lists
  *  tcon->open_file_lock protects the list of open files hanging off the tcon
+ *  inode->open_file_lock protects the openFileList hanging off the inode
  *  cfile->file_info_lock protects counters and fields in cifs file struct
  *  f_owner.lock protects certain per file struct operations
  *  mapping->page_lock protects certain per page operations
  *
+ *  Note that the cifs_tcon.open_file_lock should be taken before
+ *  not after the cifsInodeInfo.open_file_lock
+ *
  *  Semaphores
  *  ----------
  *  sesSem     operations on smb session
fs/cifs/file.c +6 -2
@@ -338,10 +338,12 @@ cifs_new_fileinfo(struct cifs_fid *fid,
 	atomic_inc(&tcon->num_local_opens);
 
 	/* if readable file instance put first in list*/
+	spin_lock(&cinode->open_file_lock);
 	if (file->f_mode & FMODE_READ)
 		list_add(&cfile->flist, &cinode->openFileList);
 	else
 		list_add_tail(&cfile->flist, &cinode->openFileList);
+	spin_unlock(&cinode->open_file_lock);
 	spin_unlock(&tcon->open_file_lock);
 
 	if (fid->purge_cache)
@@ -413,7 +415,9 @@ void _cifsFileInfo_put(struct cifsFileIn
 	cifs_add_pending_open_locked(&fid, cifs_file->tlink, &open);
 
 	/* remove it from the lists */
+	spin_lock(&cifsi->open_file_lock);
 	list_del(&cifs_file->flist);
+	spin_unlock(&cifsi->open_file_lock);
 	list_del(&cifs_file->tlist);
 	atomic_dec(&tcon->num_local_opens);
 
@@ -1950,9 +1954,9 @@ refind_writable:
 			return 0;
 		}
 
-		spin_lock(&tcon->open_file_lock);
+		spin_lock(&cifs_inode->open_file_lock);
 		list_move_tail(&inv_file->flist, &cifs_inode->openFileList);
-		spin_unlock(&tcon->open_file_lock);
+		spin_unlock(&cifs_inode->open_file_lock);
 		cifsFileInfo_put(inv_file);
 		++refind;
 		inv_file = NULL;
author maintainer
#12 lore raw

PATCH 12/121 usb: xhci: Dont try to recover an endpoint if port is in error state.

In reply to Greg Kroah-Hartman

From: Mathias Nyman <[email protected]>

commit b8c3b718087bf7c3c8e388eb1f72ac1108a4926e upstream.

A USB3 device needs to be reset and re-enumarated if the port it connects to goes to a error state, with link state inactive.

There is no use in trying to recover failed transactions by resetting endpoints at this stage. Tests show that in rare cases, after multiple endpoint resets of a roothub port the whole host controller might stop completely.

Several retries to recover from transaction error can happen as it can take a long time before the hub thread discovers the USB3 port error and inactive link.

We can't reliably detect the port error from slot or endpoint context due to a limitation in xhci, see xhci specs section 4.8.3:
"There are several cases where the EP State field in the Output Endpoint Context may not reflect the current state of an endpoint" and
"Software should maintain an accurate value for EP State, by tracking it with an internal variable that is driven by Events and Doorbell accesses"

Same appears to be true for slot state.

set a flag to the corresponding slot if a USB3 roothub port link goes inactive to prevent both queueing new URBs and resetting endpoints.

---
 drivers/usb/host/xhci-ring.c |   15 ++++++++++++++-
 drivers/usb/host/xhci.c      |    5 +++++
 drivers/usb/host/xhci.h      |    9 +++++++++
 3 files changed, 28 insertions(+), 1 deletion(-)
drivers/usb/host/xhci-ring.c +14 -1
@@ -1608,8 +1608,13 @@ static void handle_port_status(struct xh
 		usb_hcd_resume_root_hub(hcd);
 	}
 
-	if (hcd->speed >= HCD_USB3 && (portsc & PORT_PLS_MASK) == XDEV_INACTIVE)
+	if (hcd->speed >= HCD_USB3 &&
+	    (portsc & PORT_PLS_MASK) == XDEV_INACTIVE) {
+		slot_id = xhci_find_slot_id_by_port(hcd, xhci, hcd_portnum + 1);
+		if (slot_id && xhci->devs[slot_id])
+			xhci->devs[slot_id]->flags |= VDEV_PORT_ERROR;
 		bus_state->port_remote_wakeup &= ~(1 << hcd_portnum);
+	}
 
 	if ((portsc & PORT_PLC) && (portsc & PORT_PLS_MASK) == XDEV_RESUME) {
 		xhci_dbg(xhci, "port resume event for port %d\n", port_id);
@@ -1797,6 +1802,14 @@ static void xhci_cleanup_halted_endpoint
 {
 	struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
 	struct xhci_command *command;
+
+	/*
+	 * Avoid resetting endpoint if link is inactive. Can cause host hang.
+	 * Device will be reset soon to recover the link so don't do anything
+	 */
+	if (xhci->devs[slot_id]->flags & VDEV_PORT_ERROR)
+		return;
+
 	command = xhci_alloc_command(xhci, false, GFP_ATOMIC);
 	if (!command)
 		return;
drivers/usb/host/xhci.c +5 -0
@@ -1442,6 +1442,10 @@ static int xhci_urb_enqueue(struct usb_h
 			xhci_dbg(xhci, "urb submitted during PCI suspend\n");
 		return -ESHUTDOWN;
 	}
+	if (xhci->devs[slot_id]->flags & VDEV_PORT_ERROR) {
+		xhci_dbg(xhci, "Can't queue urb, port error, link inactive\n");
+		return -ENODEV;
+	}
 
 	if (usb_endpoint_xfer_isoc(&urb->ep->desc))
 		num_tds = urb->number_of_packets;
@@ -3724,6 +3728,7 @@ static int xhci_discover_or_reset_device
 	}
 	/* If necessary, update the number of active TTs on this root port */
 	xhci_update_tt_active_eps(xhci, virt_dev, old_active_eps);
+	virt_dev->flags = 0;
 	ret = 0;
 
 command_cleanup:
drivers/usb/host/xhci.h +9 -0
@@ -1010,6 +1010,15 @@ struct xhci_virt_device {
 	u8				real_port;
 	struct xhci_interval_bw_table	*bw_table;
 	struct xhci_tt_bw_info		*tt_info;
+	/*
+	 * flags for state tracking based on events and issued commands.
+	 * Software can not rely on states from output contexts because of
+	 * latency between events and xHC updating output context values.
+	 * See xhci 1.1 section 4.8.3 for more details
+	 */
+	unsigned long			flags;
+#define VDEV_PORT_ERROR			BIT(0) /* Port error, link inactive */
+
 	/* The current max exit latency for the enabled USB3 link states. */
 	u16				current_mel;
 	/* Used for the debugfs interfaces. */
author maintainer
#14 lore raw

PATCH 14/121 cifs: fix GlobalMid_Lock bug in cifs_reconnect

In reply to Greg Kroah-Hartman

From: Ronnie Sahlberg <[email protected]>

commit 61cabc7b0a5cf0d3c532cfa96594c801743fe7f6 upstream.

We can not hold the GlobalMid_Lock spinlock during the
dfs processing in cifs_reconnect since it invokes things that may sleep and thus trigger :

BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:23

Thus we need to drop the spinlock during this code block.

RHBZ: 1716743

---
 fs/cifs/connect.c |    2 ++
 1 file changed, 2 insertions(+)
fs/cifs/connect.c +2 -0
@@ -478,6 +478,7 @@ cifs_reconnect(struct TCP_Server_Info *s
 	spin_lock(&GlobalMid_Lock);
 	server->nr_targets = 1;
 #ifdef CONFIG_CIFS_DFS_UPCALL
+	spin_unlock(&GlobalMid_Lock);
 	cifs_sb = find_super_by_tcp(server);
 	if (IS_ERR(cifs_sb)) {
 		rc = PTR_ERR(cifs_sb);
@@ -495,6 +496,7 @@ cifs_reconnect(struct TCP_Server_Info *s
 	}
 	cifs_dbg(FYI, "%s: will retry %d target(s)\n", __func__,
 		 server->nr_targets);
+	spin_lock(&GlobalMid_Lock);
 #endif
 	if (server->tcpStatus == CifsExiting) {
 		/* the demux thread will exit normally
author maintainer
#15 lore raw

PATCH 15/121 IB/hfi1: Validate fault injection opcode user input

In reply to Greg Kroah-Hartman

From: Kaike Wan <[email protected]>

commit 5f90677ed31963abb184ee08ebee4a4a68225dd8 upstream.

The opcode range for fault injection from user should be validated before it is applied to the fault->opcodes[] bitmap to avoid out-of-bound error.

---
 drivers/infiniband/hw/hfi1/fault.c |    5 +++++
 1 file changed, 5 insertions(+)
drivers/infiniband/hw/hfi1/fault.c +5 -0
@@ -153,6 +153,7 @@ static ssize_t fault_opcodes_write(struc
 		char *dash;
 		unsigned long range_start, range_end, i;
 		bool remove = false;
+		unsigned long bound = 1U << BITS_PER_BYTE;
 
 		end = strchr(ptr, ',');
 		if (end)
@@ -178,6 +179,10 @@ static ssize_t fault_opcodes_write(struc
 				    BITS_PER_BYTE);
 			break;
 		}
+		/* Check the inputs */
+		if (range_start >= bound || range_end >= bound)
+			break;
+
 		for (i = range_start; i <= range_end; i++) {
 			if (remove)
 				clear_bit(i, fault->opcodes);
author maintainer
#16 lore raw

PATCH 16/121 IB/hfi1: Close PSM sdma_progress sleep window

In reply to Greg Kroah-Hartman

From: Mike Marciniszyn <[email protected]>

commit da9de5f8527f4b9efc82f967d29a583318c034c7 upstream.

The call to sdma_progress() is called outside the wait lock.

In this case, there is a race condition where sdma_progress() can return false and the sdma_engine can idle. If that happens, there will be no more sdma interrupts to cause the wakeup and the user_sdma xmit will hang.

Fix by moving the lock to enclose the sdma_progress() call.

Also, delete busycount. The need for this was removed by:
commit bcad29137a97 ("IB/hfi1: Serve the most starved iowait entry first")

---
 drivers/infiniband/hw/hfi1/user_sdma.c |   12 ++++--------
 drivers/infiniband/hw/hfi1/user_sdma.h |    1 -
 2 files changed, 4 insertions(+), 9 deletions(-)
drivers/infiniband/hw/hfi1/user_sdma.c +4 -8
@@ -130,20 +130,16 @@ static int defer_packet_queue(
 {
 	struct hfi1_user_sdma_pkt_q *pq =
 		container_of(wait->iow, struct hfi1_user_sdma_pkt_q, busy);
-	struct user_sdma_txreq *tx =
-		container_of(txreq, struct user_sdma_txreq, txreq);
 
-	if (sdma_progress(sde, seq, txreq)) {
-		if (tx->busycount++ < MAX_DEFER_RETRY_COUNT)
-			goto eagain;
-	}
+	write_seqlock(&sde->waitlock);
+	if (sdma_progress(sde, seq, txreq))
+		goto eagain;
 	/*
 	 * We are assuming that if the list is enqueued somewhere, it
 	 * is to the dmawait list since that is the only place where
 	 * it is supposed to be enqueued.
 	 */
 	xchg(&pq->state, SDMA_PKT_Q_DEFERRED);
-	write_seqlock(&sde->waitlock);
 	if (list_empty(&pq->busy.list)) {
 		iowait_get_priority(&pq->busy);
 		iowait_queue(pkts_sent, &pq->busy, &sde->dmawait);
@@ -151,6 +147,7 @@ static int defer_packet_queue(
 	write_sequnlock(&sde->waitlock);
 	return -EBUSY;
 eagain:
+	write_sequnlock(&sde->waitlock);
 	return -EAGAIN;
 }
 
@@ -804,7 +801,6 @@ static int user_sdma_send_pkts(struct us
 
 		tx->flags = 0;
 		tx->req = req;
-		tx->busycount = 0;
 		INIT_LIST_HEAD(&tx->list);
 
 		/*
drivers/infiniband/hw/hfi1/user_sdma.h +0 -1
@@ -245,7 +245,6 @@ struct user_sdma_txreq {
 	struct list_head list;
 	struct user_sdma_request *req;
 	u16 flags;
-	unsigned int busycount;
 	u16 seqnum;
 };
 
author maintainer
#17 lore raw

PATCH 17/121 IB/hfi1: Avoid hardlockup with flushlist_lock

In reply to Greg Kroah-Hartman

From: Mike Marciniszyn <[email protected]>

commit cf131a81967583ae737df6383a0893b9fee75b4e upstream.

Heavy contention of the sde flushlist_lock can cause hard lockups at extreme scale when the flushing logic is under stress.

Mitigate by replacing the item at a time copy to the local list with an O(1) list_splice_init() and using the high priority work queue to do the flushes.

---
 drivers/infiniband/hw/hfi1/sdma.c |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
drivers/infiniband/hw/hfi1/sdma.c +3 -6
@@ -410,10 +410,7 @@ static void sdma_flush(struct sdma_engin
 	sdma_flush_descq(sde);
 	spin_lock_irqsave(&sde->flushlist_lock, flags);
 	/* copy flush list */
-	list_for_each_entry_safe(txp, txp_next, &sde->flushlist, list) {
-		list_del_init(&txp->list);
-		list_add_tail(&txp->list, &flushlist);
-	}
+	list_splice_init(&sde->flushlist, &flushlist);
 	spin_unlock_irqrestore(&sde->flushlist_lock, flags);
 	/* flush from flush list */
 	list_for_each_entry_safe(txp, txp_next, &flushlist, list)
@@ -2413,7 +2410,7 @@ unlock_noconn:
 	list_add_tail(&tx->list, &sde->flushlist);
 	spin_unlock(&sde->flushlist_lock);
 	iowait_inc_wait_count(wait, tx->num_desc);
-	schedule_work(&sde->flush_worker);
+	queue_work_on(sde->cpu, system_highpri_wq, &sde->flush_worker);
 	ret = -ECOMM;
 	goto unlock;
 nodesc:
@@ -2511,7 +2508,7 @@ unlock_noconn:
 		iowait_inc_wait_count(wait, tx->num_desc);
 	}
 	spin_unlock(&sde->flushlist_lock);
-	schedule_work(&sde->flush_worker);
+	queue_work_on(sde->cpu, system_highpri_wq, &sde->flush_worker);
 	ret = -ECOMM;
 	goto update_tail;
 nodesc:
author maintainer
#18 lore raw

PATCH 18/121 IB/hfi1: Correct tid qp rcd to match verbs context

In reply to Greg Kroah-Hartman

From: Mike Marciniszyn <[email protected]>

commit cc78076af14e1478c1a8fb18997674b5f8cbe3c8 upstream.

The qp priv rcd pointer doesn't match the context being used for verbs causing issues when 9B and kdeth packets are processed by different receive contexts and hence different CPUs.

When running on different CPUs the following panic can occur:

 WARNING: CPU: 3 PID: 2584 at lib/list_debug.c:59 __list_del_entry+0xa1/0xd0
 list_del corruption. prev->next should be ffff9a7ac31f7a30, but was ffff9a7c3bc89230
 CPU: 3 PID: 2584 Comm: z_wr_iss Kdump: loaded Tainted: P           OE  ------------   3.10.0-862.2.3.el7_lustre.x86_64 #1
 Call Trace:
  <IRQ>  [<ffffffffb7b0d78e>] dump_stack+0x19/0x1b
  [<ffffffffb74916d8>] __warn+0xd8/0x100
  [<ffffffffb749175f>] warn_slowpath_fmt+0x5f/0x80
  [<ffffffffb7768671>] __list_del_entry+0xa1/0xd0
  [<ffffffffc0c7a945>] process_rcv_qp_work+0xb5/0x160 [hfi1]
  [<ffffffffc0c7bc2b>] handle_receive_interrupt_nodma_rtail+0x20b/0x2b0 [hfi1]
  [<ffffffffc0c70683>] receive_context_interrupt+0x23/0x40 [hfi1]
  [<ffffffffb7540a94>] __handle_irq_event_percpu+0x44/0x1c0
  [<ffffffffb7540c42>] handle_irq_event_percpu+0x32/0x80
  [<ffffffffb7540ccc>] handle_irq_event+0x3c/0x60
  [<ffffffffb7543a1f>] handle_edge_irq+0x7f/0x150
  [<ffffffffb742d504>] handle_irq+0xe4/0x1a0
  [<ffffffffb7b23f7d>] do_IRQ+0x4d/0xf0
  [<ffffffffb7b16362>] common_interrupt+0x162/0x162
  <EOI>  [<ffffffffb775a326>] ? memcpy+0x6/0x110
  [<ffffffffc109210d>] ? abd_copy_from_buf_off_cb+0x1d/0x30 [zfs]
  [<ffffffffc10920f0>] ? abd_copy_to_buf_off_cb+0x30/0x30 [zfs]
  [<ffffffffc1093257>] abd_iterate_func+0x97/0x120 [zfs]
  [<ffffffffc10934d9>] abd_copy_from_buf_off+0x39/0x60 [zfs]
  [<ffffffffc109b828>] arc_write_ready+0x178/0x300 [zfs]
  [<ffffffffb7b11032>] ? mutex_lock+0x12/0x2f
  [<ffffffffb7b11032>] ? mutex_lock+0x12/0x2f
  [<ffffffffc1164d05>] zio_ready+0x65/0x3d0 [zfs]
  [<ffffffffc04d725e>] ? tsd_get_by_thread+0x2e/0x50 [spl]
  [<ffffffffc04d1318>] ? taskq_member+0x18/0x30 [spl]
  [<ffffffffc115ef22>] zio_execute+0xa2/0x100 [zfs]
  [<ffffffffc04d1d2c>] taskq_thread+0x2ac/0x4f0 [spl]
  [<ffffffffb74cee80>] ? wake_up_state+0x20/0x20
  [<ffffffffc115ee80>] ? zio_taskq_member.isra.7.constprop.10+0x80/0x80 [zfs]
  [<ffffffffc04d1a80>] ? taskq_thread_spawn+0x60/0x60 [spl]
  [<ffffffffb74bae31>] kthread+0xd1/0xe0
  [<ffffffffb74bad60>] ? insert_kthread_work+0x40/0x40
  [<ffffffffb7b1f5f7>] ret_from_fork_nospec_begin+0x21/0x21
  [<ffffffffb74bad60>] ? insert_kthread_work+0x40/0x40

Fix by reading the map entry in the same manner as the hardware so that the kdeth and verbs contexts match.

Fixes 5190f052a365 ("IB/hfi1: Allow the driver to initialize QP priv struct")
---
 drivers/infiniband/hw/hfi1/chip.c     |   13 +++++++++++++
 drivers/infiniband/hw/hfi1/chip.h     |    1 +
 drivers/infiniband/hw/hfi1/tid_rdma.c |    4 +---
 3 files changed, 15 insertions(+), 3 deletions(-)
drivers/infiniband/hw/hfi1/chip.c +13 -0
@@ -14028,6 +14028,19 @@ static void init_kdeth_qp(struct hfi1_de
 }
 
 /**
+ * hfi1_get_qp_map
+ * @dd: device data
+ * @idx: index to read
+ */
+u8 hfi1_get_qp_map(struct hfi1_devdata *dd, u8 idx)
+{
+	u64 reg = read_csr(dd, RCV_QP_MAP_TABLE + (idx / 8) * 8);
+
+	reg >>= (idx % 8) * 8;
+	return reg;
+}
+
+/**
  * init_qpmap_table
  * @dd - device data
  * @first_ctxt - first context
drivers/infiniband/hw/hfi1/chip.h +1 -0
@@ -1442,6 +1442,7 @@ void clear_all_interrupts(struct hfi1_de
 void remap_intr(struct hfi1_devdata *dd, int isrc, int msix_intr);
 void remap_sdma_interrupts(struct hfi1_devdata *dd, int engine, int msix_intr);
 void reset_interrupts(struct hfi1_devdata *dd);
+u8 hfi1_get_qp_map(struct hfi1_devdata *dd, u8 idx);
 
 /*
  * Interrupt source table.
drivers/infiniband/hw/hfi1/tid_rdma.c +1 -3
@@ -305,9 +305,7 @@ static struct hfi1_ctxtdata *qp_to_rcd(s
 	if (qp->ibqp.qp_num == 0)
 		ctxt = 0;
 	else
-		ctxt = ((qp->ibqp.qp_num >> dd->qos_shift) %
-			(dd->n_krcv_queues - 1)) + 1;
-
+		ctxt = hfi1_get_qp_map(dd, qp->ibqp.qp_num >> dd->qos_shift);
 	return dd->rcd[ctxt];
 }
 
author maintainer
#2 lore raw

PATCH 2/121 mmc: sdhci: sdhci-pci-o2micro: Correctly set bus width when tuning

In reply to Greg Kroah-Hartman

From: Raul E Rangel <[email protected]>

commit 0f7b79a44e7d7dd3ef1f59758c1a341f217ff5e5 upstream.

The O2Micro controller only supports tuning at 4-bits. So the host driver needs to change the bus width while tuning and then set it back when done.

There was a bug in the original implementation in that mmc->ios.bus_width also wasn't updated. Thus setting the incorrect blocksize in sdhci_send_tuning which results in a tuning failure.

Fixes 0086fc217d5d7 ("mmc: sdhci: Add support for O2 hardware tuning")
---
 drivers/mmc/host/sdhci-pci-o2micro.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/mmc/host/sdhci-pci-o2micro.c +4 -1
@@ -124,6 +124,7 @@ static int sdhci_o2_execute_tuning(struc
 	 */
 	if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) {
 		current_bus_width = mmc->ios.bus_width;
+		mmc->ios.bus_width = MMC_BUS_WIDTH_4;
 		sdhci_set_bus_width(host, MMC_BUS_WIDTH_4);
 	}
 
@@ -135,8 +136,10 @@ static int sdhci_o2_execute_tuning(struc
 
 	sdhci_end_tuning(host);
 
-	if (current_bus_width == MMC_BUS_WIDTH_8)
+	if (current_bus_width == MMC_BUS_WIDTH_8) {
+		mmc->ios.bus_width = MMC_BUS_WIDTH_8;
 		sdhci_set_bus_width(host, current_bus_width);
+	}
 
 	host->flags &= ~SDHCI_HS400_TUNING;
 	return 0;
author maintainer
#19 lore raw

PATCH 19/121 IB/hfi1: Silence txreq allocation warnings

In reply to Greg Kroah-Hartman

From: Mike Marciniszyn <[email protected]>

commit 3230f4a8d44e4a0bb7afea814b280b5129521f52 upstream.

The following warning can happen when a memory shortage occurs during txreq allocation:

[10220.939246] SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)
[10220.939246] Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/2016
[10220.939247]   cache: mnt_cache, object size: 384, buffer size: 384, default order: 2, min order: 0
[10220.939260] Workqueue: hfi0_0 _hfi1_do_send [hfi1]
[10220.939261]   node 0: slabs: 1026568, objs: 43115856, free: 0
[10220.939262] Call Trace:
[10220.939262]   node 1: slabs: 820872, objs: 34476624, free: 0
[10220.939263]  dump_stack+0x5a/0x73
[10220.939265]  warn_alloc+0x103/0x190
[10220.939267]  ? wake_all_kswapds+0x54/0x8b
[10220.939268]  __alloc_pages_slowpath+0x86c/0xa2e
[10220.939270]  ? __alloc_pages_nodemask+0x2fe/0x320
[10220.939271]  __alloc_pages_nodemask+0x2fe/0x320
[10220.939273]  new_slab+0x475/0x550
[10220.939275]  ___slab_alloc+0x36c/0x520
[10220.939287]  ? hfi1_make_rc_req+0x90/0x18b0 [hfi1]
[10220.939299]  ? __get_txreq+0x54/0x160 [hfi1]
[10220.939310]  ? hfi1_make_rc_req+0x90/0x18b0 [hfi1]
[10220.939312]  __slab_alloc+0x40/0x61
[10220.939323]  ? hfi1_make_rc_req+0x90/0x18b0 [hfi1]
[10220.939325]  kmem_cache_alloc+0x181/0x1b0
[10220.939336]  hfi1_make_rc_req+0x90/0x18b0 [hfi1]
[10220.939348]  ? hfi1_verbs_send_dma+0x386/0xa10 [hfi1]
[10220.939359]  ? find_prev_entry+0xb0/0xb0 [hfi1]
[10220.939371]  hfi1_do_send+0x1d9/0x3f0 [hfi1]
[10220.939372]  process_one_work+0x171/0x380
[10220.939374]  worker_thread+0x49/0x3f0
[10220.939375]  kthread+0xf8/0x130
[10220.939377]  ? max_active_store+0x80/0x80
[10220.939378]  ? kthread_bind+0x10/0x10
[10220.939379]  ret_from_fork+0x35/0x40
[10220.939381] SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)

The shortage is handled properly so the message isn't needed. Silence by adding the no warn option to the slab allocation.

Fixes 45842abbb292 ("staging/rdma/hfi1: move txreq header code")
---
 drivers/infiniband/hw/hfi1/verbs_txreq.c |    2 +-
 drivers/infiniband/hw/hfi1/verbs_txreq.h |    3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)
drivers/infiniband/hw/hfi1/verbs_txreq.c +1 -1
@@ -100,7 +100,7 @@ struct verbs_txreq *__get_txreq(struct h
 	if (ib_rvt_state_ops[qp->state] & RVT_PROCESS_RECV_OK) {
 		struct hfi1_qp_priv *priv;
 
-		tx = kmem_cache_alloc(dev->verbs_txreq_cache, GFP_ATOMIC);
+		tx = kmem_cache_alloc(dev->verbs_txreq_cache, VERBS_TXREQ_GFP);
 		if (tx)
 			goto out;
 		priv = qp->priv;
drivers/infiniband/hw/hfi1/verbs_txreq.h +2 -1
@@ -72,6 +72,7 @@ struct hfi1_ibdev;
 struct verbs_txreq *__get_txreq(struct hfi1_ibdev *dev,
 				struct rvt_qp *qp);
 
+#define VERBS_TXREQ_GFP (GFP_ATOMIC | __GFP_NOWARN)
 static inline struct verbs_txreq *get_txreq(struct hfi1_ibdev *dev,
 					    struct rvt_qp *qp)
 	__must_hold(&qp->slock)
@@ -79,7 +80,7 @@ static inline struct verbs_txreq *get_tx
 	struct verbs_txreq *tx;
 	struct hfi1_qp_priv *priv = qp->priv;
 
-	tx = kmem_cache_alloc(dev->verbs_txreq_cache, GFP_ATOMIC);
+	tx = kmem_cache_alloc(dev->verbs_txreq_cache, VERBS_TXREQ_GFP);
 	if (unlikely(!tx)) {
 		/* call slow path to get the lock */
 		tx = __get_txreq(dev, qp);
author maintainer
#21 lore raw

PATCH 21/121 iio: temperature: mlx90632 Relax the compatibility check

In reply to Greg Kroah-Hartman

From: Crt Mori <[email protected]>

commit 389fc70b60f534d679aea9a3f05146040ce20d77 upstream.

Register EE_VERSION contains mixture of calibration information and DSP version. So far, because calibrations were definite, the driver compatibility depended on whole contents, but in the newer production process the calibration part changes. Because of that, value in EE_VERSION will be changed and to avoid that calibration value is same as DSP version the MSB in calibration part was fixed to 1.
That means existing calibrations (medical and consumer) will now have hex values (bits 8 to 15) of 83 and 84 respectively. Driver compatibility should be based only on DSP version part of the EE_VERSION (bits 0 to 7) register.

---
 drivers/iio/temperature/mlx90632.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/iio/temperature/mlx90632.c +7 -2
@@ -81,6 +81,8 @@
 /* Magic constants */
 #define MLX90632_ID_MEDICAL	0x0105 /* EEPROM DSPv5 Medical device id */
 #define MLX90632_ID_CONSUMER	0x0205 /* EEPROM DSPv5 Consumer device id */
+#define MLX90632_DSP_VERSION	5 /* DSP version */
+#define MLX90632_DSP_MASK	GENMASK(7, 0) /* DSP version in EE_VERSION */
 #define MLX90632_RESET_CMD	0x0006 /* Reset sensor (address or global) */
 #define MLX90632_REF_12		12LL /**< ResCtrlRef value of Ch 1 or Ch 2 */
 #define MLX90632_REF_3		12LL /**< ResCtrlRef value of Channel 3 */
@@ -667,10 +669,13 @@ static int mlx90632_probe(struct i2c_cli
 	} else if (read == MLX90632_ID_CONSUMER) {
 		dev_dbg(&client->dev,
 			"Detected Consumer EEPROM calibration %x\n", read);
+	} else if ((read & MLX90632_DSP_MASK) == MLX90632_DSP_VERSION) {
+		dev_dbg(&client->dev,
+			"Detected Unknown EEPROM calibration %x\n", read);
 	} else {
 		dev_err(&client->dev,
-			"EEPROM version mismatch %x (expected %x or %x)\n",
-			read, MLX90632_ID_CONSUMER, MLX90632_ID_MEDICAL);
+			"Wrong DSP version %x (expected %x)\n",
+			read, MLX90632_DSP_VERSION);
 		return -EPROTONOSUPPORT;
 	}
 
author maintainer
#24 lore raw

PATCH 24/121 Input: silead - add MSSL0017 to acpi_device_id

In reply to Greg Kroah-Hartman

From: Daniel Smith <[email protected]>

commit 0e658060e5fc50dc282885dc424a94b5d95547e5 upstream.

On Chuwi Hi10 Plus, the Silead device id is MSSL0017.

---
 drivers/input/touchscreen/silead.c |    1 +
 1 file changed, 1 insertion(+)
drivers/input/touchscreen/silead.c +1 -0
@@ -617,6 +617,7 @@ static const struct acpi_device_id silea
 	{ "MSSL1680", 0 },
 	{ "MSSL0001", 0 },
 	{ "MSSL0002", 0 },
+	{ "MSSL0017", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, silead_ts_acpi_match);
author maintainer
#22 lore raw

PATCH 22/121 Input: synaptics - enable SMBus on ThinkPad E480 and E580

In reply to Greg Kroah-Hartman

From: Alexander Mikhaylenko <[email protected]>

commit 9843f3e08e2144724be7148e08d77a195dea257a upstream.

They are capable of using intertouch and it works well with psmouse.synaptics_intertouch=1, so add them to the list.

Without it, scrolling and gestures are jumpy, three-finger pinch gesture doesn't work and three- or four-finger swipes sometimes get stuck.

---
 drivers/input/mouse/synaptics.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/input/mouse/synaptics.c +2 -0
@@ -179,6 +179,8 @@ static const char * const smbus_pnp_ids[
 	"LEN0096", /* X280 */
 	"LEN0097", /* X280 -> ALPS trackpoint */
 	"LEN200f", /* T450s */
+	"LEN2054", /* E480 */
+	"LEN2055", /* E580 */
 	"SYN3052", /* HP EliteBook 840 G4 */
 	"SYN3221", /* HP 15-ay000 */
 	NULL
author maintainer
#27 lore raw

PATCH 27/121 apparmor: reset pos on failure to unpack for various functions

In reply to Greg Kroah-Hartman

From: Mike Salvatore <[email protected]>

commit 156e42996bd84eccb6acf319f19ce0cb140d00e3 upstream.

Each function that manipulates the aa_ext struct should reset it's "pos" member on failure. This ensures that, on failure, no changes are made to the state of the aa_ext struct.

There are paths were elements are optional and the error path is used to indicate the optional element is not present. This means instead of just aborting on error the unpack stream can become unsynchronized on optional elements, if using one of the affected functions.

Fixes 736ec752d95e ("AppArmor: policy routines for loading and unpacking policy")
---
 security/apparmor/policy_unpack.c |   47 +++++++++++++++++++++++++++++++-------
 1 file changed, 39 insertions(+), 8 deletions(-)
security/apparmor/policy_unpack.c +39 -8
@@ -223,16 +223,21 @@ static void *kvmemdup(const void *src, s
 static size_t unpack_u16_chunk(struct aa_ext *e, char **chunk)
 {
 	size_t size = 0;
+	void *pos = e->pos;
 
 	if (!inbounds(e, sizeof(u16)))
-		return 0;
+		goto fail;
 	size = le16_to_cpu(get_unaligned((__le16 *) e->pos));
 	e->pos += sizeof(__le16);
 	if (!inbounds(e, size))
-		return 0;
+		goto fail;
 	*chunk = e->pos;
 	e->pos += size;
 	return size;
+
+fail:
+	e->pos = pos;
+	return 0;
 }
 
 /* unpack control byte */
@@ -294,62 +299,84 @@ fail:
 
 static bool unpack_u8(struct aa_ext *e, u8 *data, const char *name)
 {
+	void *pos = e->pos;
+
 	if (unpack_nameX(e, AA_U8, name)) {
 		if (!inbounds(e, sizeof(u8)))
-			return 0;
+			goto fail;
 		if (data)
 			*data = get_unaligned((u8 *)e->pos);
 		e->pos += sizeof(u8);
 		return 1;
 	}
+
+fail:
+	e->pos = pos;
 	return 0;
 }
 
 static bool unpack_u32(struct aa_ext *e, u32 *data, const char *name)
 {
+	void *pos = e->pos;
+
 	if (unpack_nameX(e, AA_U32, name)) {
 		if (!inbounds(e, sizeof(u32)))
-			return 0;
+			goto fail;
 		if (data)
 			*data = le32_to_cpu(get_unaligned((__le32 *) e->pos));
 		e->pos += sizeof(u32);
 		return 1;
 	}
+
+fail:
+	e->pos = pos;
 	return 0;
 }
 
 static bool unpack_u64(struct aa_ext *e, u64 *data, const char *name)
 {
+	void *pos = e->pos;
+
 	if (unpack_nameX(e, AA_U64, name)) {
 		if (!inbounds(e, sizeof(u64)))
-			return 0;
+			goto fail;
 		if (data)
 			*data = le64_to_cpu(get_unaligned((__le64 *) e->pos));
 		e->pos += sizeof(u64);
 		return 1;
 	}
+
+fail:
+	e->pos = pos;
 	return 0;
 }
 
 static size_t unpack_array(struct aa_ext *e, const char *name)
 {
+	void *pos = e->pos;
+
 	if (unpack_nameX(e, AA_ARRAY, name)) {
 		int size;
 		if (!inbounds(e, sizeof(u16)))
-			return 0;
+			goto fail;
 		size = (int)le16_to_cpu(get_unaligned((__le16 *) e->pos));
 		e->pos += sizeof(u16);
 		return size;
 	}
+
+fail:
+	e->pos = pos;
 	return 0;
 }
 
 static size_t unpack_blob(struct aa_ext *e, char **blob, const char *name)
 {
+	void *pos = e->pos;
+
 	if (unpack_nameX(e, AA_BLOB, name)) {
 		u32 size;
 		if (!inbounds(e, sizeof(u32)))
-			return 0;
+			goto fail;
 		size = le32_to_cpu(get_unaligned((__le32 *) e->pos));
 		e->pos += sizeof(u32);
 		if (inbounds(e, (size_t) size)) {
@@ -358,6 +385,9 @@ static size_t unpack_blob(struct aa_ext
 			return size;
 		}
 	}
+
+fail:
+	e->pos = pos;
 	return 0;
 }
 
@@ -374,9 +404,10 @@ static int unpack_str(struct aa_ext *e,
 			if (src_str[size - 1] != 0)
 				goto fail;
 			*string = src_str;
+
+			return size;
 		}
 	}
-	return size;
 
 fail:
 	e->pos = pos;
author maintainer
#28 lore raw

PATCH 28/121 Revert "brcmfmac: disable command decode in sdio_aos"

In reply to Greg Kroah-Hartman

From: Douglas Anderson <[email protected]>

commit abdd5dcc00207e7c38680f3754d1bfffafff1093 upstream.

This reverts commit 29f6589140a10ece8c1d73f58043ea5b3473ab3e.

After that patch landed I find that my kernel log on rk3288-veyron-minnie and rk3288-veyron-speedy is filled with:
brcmfmac: brcmf_sdio_bus_sleep: error while changing bus sleep state -110

This seems to happen every time the Broadcom WiFi transitions out of sleep mode. Reverting the commit fixes the problem for me, so that's what this patch does.

Note that, in general, the justification in the original commit seemed a little weak. It looked like someone was testing on a SD card controller that would sometimes die if there were CRC errors on the bus. This used to happen back in early days of dw_mmc (the controller on my boards), but we fixed it. Disabling a feature on all boards just because one SD card controller is broken seems bad.

Fixes 29f6589140a1 ("brcmfmac: disable command decode in sdio_aos")
Cc Wright Feng <[email protected]>
Cc Double Lo <[email protected]>
Cc Madhan Mohan R <[email protected]>
Cc Chi-Hsien Lin <[email protected]>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c |    6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +1 -5
@@ -3373,11 +3373,7 @@ err:
 
 static bool brcmf_sdio_aos_no_decode(struct brcmf_sdio *bus)
 {
-	if (bus->ci->chip == CY_CC_43012_CHIP_ID ||
-	    bus->ci->chip == CY_CC_4373_CHIP_ID ||
-	    bus->ci->chip == BRCM_CC_4339_CHIP_ID ||
-	    bus->ci->chip == BRCM_CC_4345_CHIP_ID ||
-	    bus->ci->chip == BRCM_CC_4354_CHIP_ID)
+	if (bus->ci->chip == CY_CC_43012_CHIP_ID)
 		return true;
 	else
 		return false;
author maintainer
#25 lore raw

PATCH 25/121 apparmor: fix PROFILE_MEDIATES for untrusted input

In reply to Greg Kroah-Hartman

From: John Johansen <[email protected]>

commit 23375b13f98c5464c2b4d15f983cc062940f1f4e upstream.

While commit 11c236b89d7c2 ("apparmor: add a default null dfa") ensure every profile has a policy.dfa it does not resize the policy.start[] to have entries for every possible start value. Which means PROFILE_MEDIATES is not safe to use on untrusted input. Unforunately commit b9590ad4c4f2 ("apparmor: remove POLICY_MEDIATES_SAFE") did not take into account the start value usage.

The input string in profile_query_cb() is user controlled and is not properly checked to be within the limited start[] entries, even worse it can't be as userspace policy is allowed to make us of entries types the kernel does not know about. This mean usespace can currently cause the kernel to access memory up to 240 entries beyond the start array bounds.

Fixes b9590ad4c4f2 ("apparmor: remove POLICY_MEDIATES_SAFE")
---
 security/apparmor/include/policy.h |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
security/apparmor/include/policy.h +10 -1
@@ -217,7 +217,16 @@ static inline struct aa_profile *aa_get_
 	return labels_profile(aa_get_newest_label(&p->label));
 }
 
-#define PROFILE_MEDIATES(P, T)  ((P)->policy.start[(unsigned char) (T)])
+static inline unsigned int PROFILE_MEDIATES(struct aa_profile *profile,
+					    unsigned char class)
+{
+	if (class <= AA_CLASS_LAST)
+		return profile->policy.start[class];
+	else
+		return aa_dfa_match_len(profile->policy.dfa,
+					profile->policy.start[0], &class, 1);
+}
+
 static inline unsigned int PROFILE_MEDIATES_AF(struct aa_profile *profile,
 					       u16 AF) {
 	unsigned int state = PROFILE_MEDIATES(profile, AA_CLASS_NET);
author maintainer
#31 lore raw

PATCH 31/121 lkdtm/usercopy: Moves the KERNEL_DS test to non-canonical

In reply to Greg Kroah-Hartman

[ Upstream commit 2bf8496f6e9b7e9a557f65eb95eab16fea7958c7 ]

The prior implementation of the KERNEL_DS fault checking would work on any unmapped kernel address, but this was narrowed to the non-canonical range instead. This adjusts the LKDTM test to match.

Fixes 00c42373d397 ("x86-64: add warning for non-canonical user access address dereferences")
---
 drivers/misc/lkdtm/usercopy.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
drivers/misc/lkdtm/usercopy.c +6 -4
index d5a0e7f1813b..e172719dd86d 100644
@@ -324,14 +324,16 @@ free_user:
 
 void lkdtm_USERCOPY_KERNEL_DS(void)
 {
-	char __user *user_ptr = (char __user *)ERR_PTR(-EINVAL);
+	char __user *user_ptr =
+		(char __user *)(0xFUL << (sizeof(unsigned long) * 8 - 4));
 	mm_segment_t old_fs = get_fs();
 	char buf[10] = {0};
 
-	pr_info("attempting copy_to_user on unmapped kernel address\n");
+	pr_info("attempting copy_to_user() to noncanonical address: %px\n",
+		user_ptr);
 	set_fs(KERNEL_DS);
-	if (copy_to_user(user_ptr, buf, sizeof(buf)))
-		pr_info("copy_to_user un unmapped kernel address failed\n");
+	if (copy_to_user(user_ptr, buf, sizeof(buf)) == 0)
+		pr_err("copy_to_user() to noncanonical address succeeded!?\n");
 	set_fs(old_fs);
 }
 
Signature · 1 line
2.20.1
author maintainer
#4 lore raw

PATCH 4/121 mmc: mediatek: fix SDIO IRQ interrupt handle flow

In reply to Greg Kroah-Hartman

From: jjian zhou <[email protected]>

commit 8a5df8ac628f4febea1e6cd3044bff2d536dd096 upstream.

SDIO IRQ is triggered by low level. It need disable SDIO IRQ detected function. Otherwise the interrupt register can't be cleared. It will process the interrupt more.

Fixes 5215b2e952f3 ("mmc: mediatek: Add MMC_CAP_SDIO_IRQ support")
---
 drivers/mmc/host/mtk-sd.c |   37 ++++++++++++++++++++-----------------
 1 file changed, 20 insertions(+), 17 deletions(-)
drivers/mmc/host/mtk-sd.c +20 -17
@@ -1355,24 +1355,25 @@ static void msdc_request_timeout(struct
 	}
 }
 
-static void __msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
+static void __msdc_enable_sdio_irq(struct msdc_host *host, int enb)
 {
-	unsigned long flags;
-	struct msdc_host *host = mmc_priv(mmc);
-
-	spin_lock_irqsave(&host->lock, flags);
-	if (enb)
+	if (enb) {
 		sdr_set_bits(host->base + MSDC_INTEN, MSDC_INTEN_SDIOIRQ);
-	else
+		sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
+	} else {
 		sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INTEN_SDIOIRQ);
-	spin_unlock_irqrestore(&host->lock, flags);
+		sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
+	}
 }
 
 static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
 {
+	unsigned long flags;
 	struct msdc_host *host = mmc_priv(mmc);
 
-	__msdc_enable_sdio_irq(mmc, enb);
+	spin_lock_irqsave(&host->lock, flags);
+	__msdc_enable_sdio_irq(host, enb);
+	spin_unlock_irqrestore(&host->lock, flags);
 
 	if (enb)
 		pm_runtime_get_noresume(host->dev);
@@ -1394,6 +1395,8 @@ static irqreturn_t msdc_irq(int irq, voi
 		spin_lock_irqsave(&host->lock, flags);
 		events = readl(host->base + MSDC_INT);
 		event_mask = readl(host->base + MSDC_INTEN);
+		if ((events & event_mask) & MSDC_INT_SDIOIRQ)
+			__msdc_enable_sdio_irq(host, 0);
 		/* clear interrupts */
 		writel(events & event_mask, host->base + MSDC_INT);
 
@@ -1402,10 +1405,8 @@ static irqreturn_t msdc_irq(int irq, voi
 		data = host->data;
 		spin_unlock_irqrestore(&host->lock, flags);
 
-		if ((events & event_mask) & MSDC_INT_SDIOIRQ) {
-			__msdc_enable_sdio_irq(host->mmc, 0);
+		if ((events & event_mask) & MSDC_INT_SDIOIRQ)
 			sdio_signal_irq(host->mmc);
-		}
 
 		if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ)))
 			break;
@@ -1528,10 +1529,7 @@ static void msdc_init_hw(struct msdc_hos
 	sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIO);
 
 	/* Config SDIO device detect interrupt function */
-	if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
-		sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
-	else
-		sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
+	sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
 
 	/* Configure to default data timeout */
 	sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, 3);
@@ -2052,7 +2050,12 @@ static void msdc_hw_reset(struct mmc_hos
 
 static void msdc_ack_sdio_irq(struct mmc_host *mmc)
 {
-	__msdc_enable_sdio_irq(mmc, 1);
+	unsigned long flags;
+	struct msdc_host *host = mmc_priv(mmc);
+
+	spin_lock_irqsave(&host->lock, flags);
+	__msdc_enable_sdio_irq(host, 1);
+	spin_unlock_irqrestore(&host->lock, flags);
 }
 
 static const struct mmc_host_ops mt_msdc_ops = {
author maintainer
#5 lore raw

PATCH 5/121 mmc: mediatek: fix SDIO IRQ detection issue

In reply to Greg Kroah-Hartman

From: jjian zhou <[email protected]>

commit 20314ce30af197963b0c239f0952db6aaef73f99 upstream.

If cmd19 timeout or response crcerr occurs during execute_tuning(), it need invoke msdc_reset_hw(). Otherwise SDIO IRQ can't be detected.

Fixes 5215b2e952f3 ("mmc: mediatek: Add MMC_CAP_SDIO_IRQ support")
---
 drivers/mmc/host/mtk-sd.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/mmc/host/mtk-sd.c +2 -0
@@ -1003,6 +1003,8 @@ static void msdc_request_done(struct msd
 	msdc_track_cmd_data(host, mrq->cmd, mrq->data);
 	if (mrq->data)
 		msdc_unprepare_data(host, mrq);
+	if (host->error)
+		msdc_reset_hw(host);
 	mmc_request_done(host->mmc, mrq);
 }
 
author maintainer
#8 lore raw

PATCH 8/121 mmc: core: Prevent processing SDIO IRQs when the card is suspended

In reply to Greg Kroah-Hartman

From: Ulf Hansson <[email protected]>

commit 83293386bc95cf5e9f0c0175794455835bd1cb4a upstream.

Processing of SDIO IRQs must obviously be prevented while the card is system suspended, otherwise we may end up trying to communicate with an uninitialized SDIO card.

Reports throughout the years shows that this is not only a theoretical problem, but a real issue. So, let's finally fix this problem, by keeping track of the state for the card and bail out before processing the SDIO IRQ, in case the card is suspended.

---
 drivers/mmc/core/sdio.c     |   13 ++++++++++++-
 drivers/mmc/core/sdio_irq.c |    4 ++++
 2 files changed, 16 insertions(+), 1 deletion(-)
drivers/mmc/core/sdio.c +12 -1
@@ -941,6 +941,10 @@ static int mmc_sdio_pre_suspend(struct m
  */
 static int mmc_sdio_suspend(struct mmc_host *host)
 {
+	/* Prevent processing of SDIO IRQs in suspended state. */
+	mmc_card_set_suspended(host->card);
+	cancel_delayed_work_sync(&host->sdio_irq_work);
+
 	mmc_claim_host(host);
 
 	if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host))
@@ -989,13 +993,20 @@ static int mmc_sdio_resume(struct mmc_ho
 		err = sdio_enable_4bit_bus(host->card);
 	}
 
-	if (!err && host->sdio_irqs) {
+	if (err)
+		goto out;
+
+	/* Allow SDIO IRQs to be processed again. */
+	mmc_card_clr_suspended(host->card);
+
+	if (host->sdio_irqs) {
 		if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD))
 			wake_up_process(host->sdio_irq_thread);
 		else if (host->caps & MMC_CAP_SDIO_IRQ)
 			host->ops->enable_sdio_irq(host, 1);
 	}
 
+out:
 	mmc_release_host(host);
 
 	host->pm_flags &= ~MMC_PM_KEEP_POWER;
drivers/mmc/core/sdio_irq.c +4 -0
@@ -38,6 +38,10 @@ static int process_sdio_pending_irqs(str
 	unsigned char pending;
 	struct sdio_func *func;
 
+	/* Don't process SDIO IRQs if the card is suspended. */
+	if (mmc_card_suspended(card))
+		return 0;
+
 	/*
 	 * Optimization, if there is only 1 function interrupt registered
 	 * and we know an IRQ was signaled then call irq handler directly.
author maintainer
#42 lore raw

PATCH 42/121 ARC: [plat-hsdk]: Add missing FIFO size entry in GMAC node

In reply to Greg Kroah-Hartman

[ Upstream commit 4c70850aeb2e40016722cd1abd43c679666d3ca0 ]

Add the binding for RX/TX fifo size of GMAC node.

---
 arch/arc/boot/dts/hsdk.dts | 3 +++
 1 file changed, 3 insertions(+)
arch/arc/boot/dts/hsdk.dts +3 -0
index 699f372b2a6f..6219b372e9c1 100644
@@ -196,6 +196,9 @@
 			mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
 			dma-coherent;
 
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <4096>;
+
 			mdio {
 				#address-cells = <1>;
 				#size-cells = <0>;
Signature · 1 line
2.20.1
author maintainer
#33 lore raw

PATCH 33/121 dmaengine: jz4780: Fix transfers being ACKed too soon

In reply to Greg Kroah-Hartman

[ Upstream commit 4e4106f5e942bff65548e82fc330d40385c89220 ]

When a multi-descriptor DMA transfer is in progress, the "IRQ pending" flag will apparently be set for that channel as soon as the last descriptor loads, way before the IRQ actually happens. This behaviour has been observed on the JZ4725B, but maybe other SoCs are affected.

In the case where another DMA transfer is running into completion on a separate channel, the IRQ handler would then run the completion handler for our previous channel even if the transfer didn't actually finish.

Fix this by checking in the completion handler that we're indeed done; if not the interrupted DMA transfer will simply be resumed.

---
 drivers/dma/dma-jz4780.c | 32 +++++++++++++++++++++-----------
 1 file changed, 21 insertions(+), 11 deletions(-)
drivers/dma/dma-jz4780.c +21 -11
index 9ce0a386225b..f49534019d37 100644
@@ -666,10 +666,11 @@ static enum dma_status jz4780_dma_tx_status(struct dma_chan *chan,
 	return status;
 }
 
-static void jz4780_dma_chan_irq(struct jz4780_dma_dev *jzdma,
-	struct jz4780_dma_chan *jzchan)
+static bool jz4780_dma_chan_irq(struct jz4780_dma_dev *jzdma,
+				struct jz4780_dma_chan *jzchan)
 {
 	uint32_t dcs;
+	bool ack = true;
 
 	spin_lock(&jzchan->vchan.lock);
 
@@ -692,12 +693,20 @@ static void jz4780_dma_chan_irq(struct jz4780_dma_dev *jzdma,
 		if ((dcs & (JZ_DMA_DCS_AR | JZ_DMA_DCS_HLT)) == 0) {
 			if (jzchan->desc->type == DMA_CYCLIC) {
 				vchan_cyclic_callback(&jzchan->desc->vdesc);
-			} else {
+
+				jz4780_dma_begin(jzchan);
+			} else if (dcs & JZ_DMA_DCS_TT) {
 				vchan_cookie_complete(&jzchan->desc->vdesc);
 				jzchan->desc = NULL;
-			}
 
-			jz4780_dma_begin(jzchan);
+				jz4780_dma_begin(jzchan);
+			} else {
+				/* False positive - continue the transfer */
+				ack = false;
+				jz4780_dma_chn_writel(jzdma, jzchan->id,
+						      JZ_DMA_REG_DCS,
+						      JZ_DMA_DCS_CTE);
+			}
 		}
 	} else {
 		dev_err(&jzchan->vchan.chan.dev->device,
@@ -705,21 +714,22 @@ static void jz4780_dma_chan_irq(struct jz4780_dma_dev *jzdma,
 	}
 
 	spin_unlock(&jzchan->vchan.lock);
+
+	return ack;
 }
 
 static irqreturn_t jz4780_dma_irq_handler(int irq, void *data)
 {
 	struct jz4780_dma_dev *jzdma = data;
+	unsigned int nb_channels = jzdma->soc_data->nb_channels;
 	uint32_t pending, dmac;
 	int i;
 
 	pending = jz4780_dma_ctrl_readl(jzdma, JZ_DMA_REG_DIRQP);
 
-	for (i = 0; i < jzdma->soc_data->nb_channels; i++) {
-		if (!(pending & (1<<i)))
-			continue;
-
-		jz4780_dma_chan_irq(jzdma, &jzdma->chan[i]);
+	for_each_set_bit(i, (unsigned long *)&pending, nb_channels) {
+		if (jz4780_dma_chan_irq(jzdma, &jzdma->chan[i]))
+			pending &= ~BIT(i);
 	}
 
 	/* Clear halt and address error status of all channels. */
@@ -728,7 +738,7 @@ static irqreturn_t jz4780_dma_irq_handler(int irq, void *data)
 	jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DMAC, dmac);
 
 	/* Clear interrupt pending status. */
-	jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DIRQP, 0);
+	jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DIRQP, pending);
 
 	return IRQ_HANDLED;
 }
Signature · 1 line
2.20.1
author maintainer
#48 lore raw

PATCH 48/121 parisc: Fix compiler warnings in float emulation code

In reply to Greg Kroah-Hartman

[ Upstream commit 6b98d9134e14f5ef4bcf64b27eedf484ed19a1ec ]

Avoid such compiler warnings:
arch/parisc/math-emu/cnv_float.h:71:27: warning: ‘<<’ in boolean context, did you mean ‘<’ ? [-Wint-in-bool-context]

     ((Dintp1(dint_valueA) << 33 - SGL_EXP_LENGTH) || Dintp2(dint_valueB))

arch/parisc/math-emu/fcnvxf.c:257:6: note: in expansion of macro ‘Dint_isinexact_to_sgl’
if (Dint_isinexact_to_sgl(srcp1,srcp2)) {

---
 arch/parisc/math-emu/cnv_float.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
arch/parisc/math-emu/cnv_float.h +4 -4
index 933423fa5144..b0db61188a61 100644
@@ -60,19 +60,19 @@
     ((exponent < (SGL_P - 1)) ?				\
      (Sall(sgl_value) << (SGL_EXP_LENGTH + 1 + exponent)) : FALSE)
 
-#define Int_isinexact_to_sgl(int_value)	(int_value << 33 - SGL_EXP_LENGTH)
+#define Int_isinexact_to_sgl(int_value)	((int_value << 33 - SGL_EXP_LENGTH) != 0)
 
 #define Sgl_roundnearest_from_int(int_value,sgl_value)			\
     if (int_value & 1<<(SGL_EXP_LENGTH - 2))   /* round bit */		\
-    	if ((int_value << 34 - SGL_EXP_LENGTH) || Slow(sgl_value))	\
+	if (((int_value << 34 - SGL_EXP_LENGTH) != 0) || Slow(sgl_value)) \
 		Sall(sgl_value)++
 
 #define Dint_isinexact_to_sgl(dint_valueA,dint_valueB)		\
-    ((Dintp1(dint_valueA) << 33 - SGL_EXP_LENGTH) || Dintp2(dint_valueB))
+    (((Dintp1(dint_valueA) << 33 - SGL_EXP_LENGTH) != 0) || Dintp2(dint_valueB))
 
 #define Sgl_roundnearest_from_dint(dint_valueA,dint_valueB,sgl_value)	\
     if (Dintp1(dint_valueA) & 1<<(SGL_EXP_LENGTH - 2)) 			\
-    	if ((Dintp1(dint_valueA) << 34 - SGL_EXP_LENGTH) ||		\
+	if (((Dintp1(dint_valueA) << 34 - SGL_EXP_LENGTH) != 0) ||	\
     	Dintp2(dint_valueB) || Slow(sgl_value)) Sall(sgl_value)++
 
 #define Dint_isinexact_to_dbl(dint_value) 	\
Signature · 1 line
2.20.1
author maintainer
#9 lore raw

PATCH 9/121 scsi: ufs: Avoid runtime suspend possibly being blocked forever

In reply to Greg Kroah-Hartman

From: Stanley Chu <[email protected]>

commit 24e2e7a19f7e4b83d0d5189040d997bce3596473 upstream.

UFS runtime suspend can be triggered after pm_runtime_enable() is invoked in ufshcd_pltfrm_init(). However if the first runtime suspend is triggered before binding ufs_hba structure to ufs device structure via platform_set_drvdata(), then UFS runtime suspend will be no longer triggered in the future because its dev->power.runtime_error was set in the first triggering and does not have any chance to be cleared.

To be more clear, dev->power.runtime_error is set if hba is NULL in ufshcd_runtime_suspend() which returns -EINVAL to rpm_callback() where dev->power.runtime_error is set as -EINVAL. In this case, any future rpm_suspend() for UFS device fails because rpm_check_suspend_allowed() fails due to non-zero
dev->power.runtime_error.

To resolve this issue, make sure the first UFS runtime suspend get valid "hba" in ufshcd_runtime_suspend(): Enable UFS runtime PM only after hba is successfully bound to UFS device structure.

Fixes 62694735ca95 ([SCSI] ufs: Add runtime PM support for UFS host controller driver)
---
 drivers/scsi/ufs/ufshcd-pltfrm.c |   11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
drivers/scsi/ufs/ufshcd-pltfrm.c +4 -7
@@ -340,24 +340,21 @@ int ufshcd_pltfrm_init(struct platform_d
 		goto dealloc_host;
 	}
 
-	pm_runtime_set_active(&pdev->dev);
-	pm_runtime_enable(&pdev->dev);
-
 	ufshcd_init_lanes_per_dir(hba);
 
 	err = ufshcd_init(hba, mmio_base, irq);
 	if (err) {
 		dev_err(dev, "Initialization failed\n");
-		goto out_disable_rpm;
+		goto dealloc_host;
 	}
 
 	platform_set_drvdata(pdev, hba);
 
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
 	return 0;
 
-out_disable_rpm:
-	pm_runtime_disable(&pdev->dev);
-	pm_runtime_set_suspended(&pdev->dev);
 dealloc_host:
 	ufshcd_dealloc_host(hba);
 out:

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 5.1.15-stable review

This is the start of the stable review cycle for the 5.1.15 release. There are 121 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 26 Jun 2019 09:22:03 AM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.15-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.1.15-rc1

James Morse <[email protected]>
x86/resctrl: Don't stop walking closids when a locksetup group is found

Jouni Malinen <[email protected]>
mac80211: Do not use stack memory with scatterlist for GMAC

Andy Strohman <[email protected]>
nl80211: fix station_info pertid memory leak

Yu Wang <[email protected]>
mac80211: handle deauthentication/disassociation from TDLS peer

Manikanta Pubbisetty <[email protected]>
{nl,mac}80211: allow 4addr AP operation on crypto controlled devices

Johannes Berg <[email protected]>
mac80211: drop robust management frames from unknown TA

Eric Biggers <[email protected]>
cfg80211: fix memory leak of wiphy device name

Christian Brauner <[email protected]>
fs/namespace: fix unprivileged mount propagation

Andy Lutomirski <[email protected]>
x86/vdso: Prevent segfaults due to hoisted vclock reads

Steve French <[email protected]>
SMB3: retry on STATUS_INSUFFICIENT_RESOURCES instead of failing write

Marcel Holtmann <[email protected]>
Bluetooth: Fix regression with minimum encryption key size alignment

Marcel Holtmann <[email protected]>
Bluetooth: Align minimum encryption key size for LE and BR/EDR connections

Gao Xiang <[email protected]>
staging: erofs: add requirements field in superblock

Todd Kjos <[email protected]>
binder: fix possible UAF when freeing buffer

Ville Syrjälä <[email protected]>
drm/i915: Don't clobber M/N values during fastset check

Thomas Hellstrom <[email protected]>
drm/vmwgfx: Use the backdoor port if the HB port is not available

Amir Goldstein <[email protected]>
ovl: make i_ino consistent with st_ino in more cases

Sean Christopherson <[email protected]>
KVM: x86/mmu: Allocate PAE root array when using SVM's 32-bit NPT

Anisse Astier <[email protected]>
arm64: ssbd: explicitly depend on <linux/prctl.h>

Anisse Astier <[email protected]>
arm64/sve: <uapi/asm/ptrace.h> should not depend on <uapi/linux/prctl.h>

Faiz Abbas <[email protected]>
ARM: dts: am57xx-idk: Remove support for voltage switching for SD card

Faiz Abbas <[email protected]>
ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values

Jan Kundrát <[email protected]>
ARM: mvebu_v7_defconfig: fix Ethernet on Clearfog

Fabio Estevam <[email protected]>
ARM: imx: cpuidle-imx6sx: Restrict the SW2ISO increase to i.MX6SX

Naveen N. Rao <[email protected]>
powerpc/bpf: use unsigned division instruction for 64-bit operations

ShihPo Hung <[email protected]>
riscv: mm: synchronize MMU after pte change

Willem de Bruijn <[email protected]>
can: purge socket error queue on sock destruct

Joakim Zhang <[email protected]>
can: flexcan: fix timeout when set small bitrate

Anssi Hannula <[email protected]>
can: xilinx_can: use correct bittiming_const for CAN FD core

Naohiro Aota <[email protected]>
btrfs: start readahead also in seed devices

Arnd Bergmann <[email protected]>
ovl: fix bogus -Wmaybe-unitialized warning

Miklos Szeredi <[email protected]>
ovl: don't fail with disconnected lower NFS

Amir Goldstein <[email protected]>
ovl: detect overlapping layers

Jaesoo Lee <[email protected]>
nvme: Fix u32 overflow in the number of namespace list calculation

Dave Martin <[email protected]>
arm64: Silence gcc warnings about arch ABI drift

Robert Hancock <[email protected]>
hwmon: (pmbus/core) Treat parameters as paged if on multiple pages

Eduardo Valentin <[email protected]>

    hwmon: (core) add thermal sensors only if dev->of_node is present

Alexandra Winter <[email protected]>
s390/qeth: fix VLAN attribute in bridge_hostnotify udev event

Julian Wiedmann <[email protected]>
s390/qeth: check dst entry before use

Julian Wiedmann <[email protected]>
s390/qeth: handle limited IPv4 broadcast in L3 TX path

Christian Brauner <[email protected]>
tests: fix pidfd-test compilation

Lucas Stach <[email protected]>
udmabuf: actually unmap the scatterlist

Miaohe Lin <[email protected]>
net: ipvlan: Fix ipvlan device tso disabled while NETIF_F_IP_CSUM is set

Dan Carpenter <[email protected]>
scsi: smartpqi: unlock on error in pqi_submit_raid_request_synchronous()

Avri Altman <[email protected]>
scsi: ufs: Check that space was properly alloced in copy_query_response

Russell King <[email protected]>
net: phylink: avoid reducing support mask

George G. Davis <[email protected]>
scripts/checkstack.pl: Fix arm64 wrong or unknown architecture

Trevor Bourget <[email protected]>
kbuild: tar-pkg: enable communication with jobserver

Minwoo Im <[email protected]>
nvmet: fix data_len to 0 for bdev-backed write_zeroes

Robin Murphy <[email protected]>
drm/arm/hdlcd: Allow a bit of clock tolerance

Robin Murphy <[email protected]>
drm/arm/hdlcd: Actually validate CRTC modes

Wen He <[email protected]>
drm/arm/mali-dp: Add a loop around the second set CVAL and try 5 times

Xin Long <[email protected]>
selftests: set sysctl bc_forwarding properly in router_broadcast.sh

Sean Wang <[email protected]>
net: ethernet: mediatek: Use NET_IP_ALIGN to judge if HW RX_2BYTE_OFFSET is enabled

Sean Wang <[email protected]>
net: ethernet: mediatek: Use hw_feature to judge if HWLRO is supported

Young Xiao <[email protected]>
sparc: perf: fix updated event period in response to PERF_EVENT_IOC_PERIOD

Gen Zhang <[email protected]>
mdesc: fix a missing-check bug in get_vdev_port_node_info()

Yonglong Liu <[email protected]>
net: hns: Fix loopback test failed at copper ports

Nikita Yushchenko <[email protected]>
net: dsa: mv88e6xxx: avoid error message on remove from VLAN 0

Vincent Chen <[email protected]>
nds32: Avoid IEX status being incorrectly modified

Naresh Kamboju <[email protected]>
selftests: vm: install test_vmalloc.sh for run_vmtests

Alakesh Haloi <[email protected]>
userfaultfd: selftest: fix compiler warning

Alex Shi <[email protected]>
kselftest/cgroup: fix incorrect test_core skip

Alex Shi <[email protected]>
kselftest/cgroup: fix unexpected testing failure on test_core

Alex Shi <[email protected]>
kselftest/cgroup: fix unexpected testing failure on test_memcontrol

Guenter Roeck <[email protected]>
xtensa: Fix section mismatch between memblock_reserve and mem_reserve

Eric Biggers <[email protected]>
crypto: hmac - fix memory leak in hmac_init_tfm()

YueHaibing <[email protected]>
MIPS: uprobes: remove set but not used variable 'epc'

Kamenee Arumugam <[email protected]>
IB/hfi1: Validate page aligned for a given virtual address

Mike Marciniszyn <[email protected]>
IB/{qib, hfi1, rdmavt}: Correct ibv_devinfo max_mr value

Mike Marciniszyn <[email protected]>
IB/hfi1: Insure freeze_work work_struct is canceled on shutdown

Mike Marciniszyn <[email protected]>
IB/rdmavt: Fix alloc_qpn() WARN_ON()

Oded Gabbay <[email protected]>
habanalabs: fix bug in checking huge page optimization

Helge Deller <[email protected]>
parisc: Fix compiler warnings in float emulation code

YueHaibing <[email protected]>
parport: Fix mem leak in parport_register_dev_model

Scott Wood <[email protected]>

    fpga: dfl: Add lockdep classes for pdata->lock

Scott Wood <[email protected]>
fpga: dfl: afu: Pass the correct device to dma_mapping_error()

Wen Yang <[email protected]>
fpga: stratix10-soc: fix use-after-free on s10_init()

Masahiro Yamada <[email protected]>
MIPS: mark ginvt() as __always_inline

Jose Abreu <[email protected]>
ARC: [plat-hsdk]: Add missing FIFO size entry in GMAC node

Jose Abreu <[email protected]>
ARC: [plat-hsdk]: Add missing multicast filter bins number to GMAC node

Eric Long <[email protected]>
dmaengine: sprd: Fix the right place to configure 2-stage transfer

Eric Long <[email protected]>
dmaengine: sprd: Fix block length overflow

Eric Long <[email protected]>
dmaengine: sprd: Fix the incorrect start for 2-stage destination channels

Baolin Wang <[email protected]>
dmaengine: sprd: Add validation of current descriptor in irq handler

Baolin Wang <[email protected]>
dmaengine: sprd: Fix the possible crash when getting descriptor status

Dan Carpenter <[email protected]>
dmaengine: mediatek-cqdma: sleeping in atomic context

Colin Ian King <[email protected]>
dmaengine: dw-axi-dmac: fix null dereference when pointer first is null

Paul Cercueil <[email protected]>
dmaengine: jz4780: Fix transfers being ACKed too soon

Vineet Gupta <[email protected]>
ARC: fix build warnings

Kees Cook <[email protected]>
lkdtm/usercopy: Moves the KERNEL_DS test to non-canonical

Douglas Anderson <[email protected]>
brcmfmac: sdio: Don't tune while the card is off

Douglas Anderson <[email protected]>
brcmfmac: sdio: Disable auto-tuning around commands expected to fail

Douglas Anderson <[email protected]>
Revert "brcmfmac: disable command decode in sdio_aos"

Mike Salvatore <[email protected]>
apparmor: reset pos on failure to unpack for various functions

Jann Horn <[email protected]>
apparmor: enforce nullbyte at end of tag string

John Johansen <[email protected]>
apparmor: fix PROFILE_MEDIATES for untrusted input

Daniel Smith <[email protected]>
Input: silead - add MSSL0017 to acpi_device_id

Andrey Smirnov <[email protected]>
Input: uinput - add compat ioctl number translation for UI_*_FF_UPLOAD

Alexander Mikhaylenko <[email protected]>
Input: synaptics - enable SMBus on ThinkPad E480 and E580

Crt Mori <[email protected]>
iio: temperature: mlx90632 Relax the compatibility check

Lorenzo Bianconi <[email protected]>
iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller

Mike Marciniszyn <[email protected]>
IB/hfi1: Silence txreq allocation warnings

Mike Marciniszyn <[email protected]>
IB/hfi1: Correct tid qp rcd to match verbs context

Mike Marciniszyn <[email protected]>
IB/hfi1: Avoid hardlockup with flushlist_lock

Mike Marciniszyn <[email protected]>
IB/hfi1: Close PSM sdma_progress sleep window

Kaike Wan <[email protected]>
IB/hfi1: Validate fault injection opcode user input

Ronnie Sahlberg <[email protected]>
cifs: fix GlobalMid_Lock bug in cifs_reconnect

Ronnie Sahlberg <[email protected]>
cifs: add spinlock for the openFileList to cifsInodeInfo

Mathias Nyman <[email protected]>
usb: xhci: Don't try to recover an endpoint if port is in error state.

Mathias Nyman <[email protected]>
xhci: detect USB 3.2 capable host controllers correctly

Peter Chen <[email protected]>
usb: chipidea: udc: workaround for endpoint conflict issue

Stanley Chu <[email protected]>
scsi: ufs: Avoid runtime suspend possibly being blocked forever

Ulf Hansson <[email protected]>
mmc: core: Prevent processing SDIO IRQs when the card is suspended

Douglas Anderson <[email protected]>
mmc: core: Add sdio_retune_hold_now() and sdio_retune_release()

Douglas Anderson <[email protected]>
mmc: core: API to temporarily disable retuning for SDIO CRC errors

jjian zhou <[email protected]>
mmc: mediatek: fix SDIO IRQ detection issue

jjian zhou <[email protected]>
mmc: mediatek: fix SDIO IRQ interrupt handle flow

Wolfram Sang <[email protected]>

    mmc: sdhi: disallow HS400 for M3-W ES1.2, RZ/G2M, and V3H

Raul E Rangel <[email protected]>
mmc: sdhci: sdhci-pci-o2micro: Correctly set bus width when tuning

Miguel Ojeda <[email protected]>
tracing: Silence GCC 9 array bounds warning

-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arc/boot/dts/hsdk.dts                         |   4 +
 arch/arc/include/asm/cmpxchg.h                     |  14 +-
 arch/arc/mm/tlb.c                                  |  13 +-
 arch/arm/boot/dts/am57xx-idk-common.dtsi           |   1 +
 arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi          |  40 ++---
 arch/arm/configs/mvebu_v7_defconfig                |   1 +
 arch/arm/mach-imx/cpuidle-imx6sx.c                 |   3 +-
 arch/arm64/Makefile                                |   1 +
 arch/arm64/include/uapi/asm/ptrace.h               |   8 +-
 arch/arm64/kernel/ssbd.c                           |   1 +
 arch/mips/include/asm/ginvt.h                      |   2 +-
 arch/mips/kernel/uprobes.c                         |   3 -
 arch/nds32/include/asm/bitfield.h                  |   2 +-
 arch/nds32/include/asm/fpu.h                       |   2 +-
 arch/nds32/include/asm/syscalls.h                  |   2 +-
 arch/nds32/include/uapi/asm/fp_udfiex_crtl.h       |  16 ++
 arch/nds32/include/uapi/asm/sigcontext.h           |  24 ++-
 arch/nds32/include/uapi/asm/udftrap.h              |  13 --
 arch/nds32/include/uapi/asm/unistd.h               |   4 +-
 arch/nds32/kernel/fpu.c                            |  15 +-
 arch/nds32/kernel/sys_nds32.c                      |  26 ++--
 arch/parisc/math-emu/cnv_float.h                   |   8 +-
 arch/powerpc/include/asm/ppc-opcode.h              |   1 +
 arch/powerpc/net/bpf_jit.h                         |   2 +-
 arch/powerpc/net/bpf_jit_comp64.c                  |   8 +-
 arch/riscv/mm/fault.c                              |  13 ++
 arch/sparc/kernel/mdesc.c                          |   2 +
 arch/sparc/kernel/perf_event.c                     |   4 +
 arch/x86/entry/vdso/vclock_gettime.c               |  15 +-
 arch/x86/kernel/cpu/resctrl/rdtgroup.c             |   2 +-
 arch/x86/kvm/mmu.c                                 |  16 +-
 arch/xtensa/kernel/setup.c                         |   3 +-
 crypto/hmac.c                                      |   4 +-
 drivers/android/binder.c                           |  16 +-
 drivers/dma-buf/udmabuf.c                          |   1 +
 drivers/dma/dma-jz4780.c                           |  32 ++--
 drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c     |   3 +-
 drivers/dma/mediatek/mtk-cqdma.c                   |   4 +-
 drivers/dma/sprd-dma.c                             |  29 ++--
 drivers/fpga/dfl-afu-dma-region.c                  |   2 +-
 drivers/fpga/dfl.c                                 |  16 +-
 drivers/fpga/stratix10-soc.c                       |   6 +-
 drivers/gpu/drm/arm/hdlcd_crtc.c                   |  14 +-
 drivers/gpu/drm/arm/malidp_drv.c                   |  13 +-
 drivers/gpu/drm/i915/intel_display.c               |  38 +++--
 drivers/gpu/drm/vmwgfx/vmwgfx_msg.c                | 146 +++++++++++++++----
 drivers/hwmon/hwmon.c                              |   2 +-
 drivers/hwmon/pmbus/pmbus_core.c                   |  34 ++++-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h            |   2 +
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c       |  25 +++-
 drivers/iio/temperature/mlx90632.c                 |   9 +-
 drivers/infiniband/hw/hfi1/chip.c                  |  14 ++
 drivers/infiniband/hw/hfi1/chip.h                  |   1 +
 drivers/infiniband/hw/hfi1/fault.c                 |   5 +
 drivers/infiniband/hw/hfi1/sdma.c                  |   9 +-
 drivers/infiniband/hw/hfi1/tid_rdma.c              |   4 +-
 drivers/infiniband/hw/hfi1/user_exp_rcv.c          |   3 +
 drivers/infiniband/hw/hfi1/user_sdma.c             |  12 +-
 drivers/infiniband/hw/hfi1/user_sdma.h             |   1 -
 drivers/infiniband/hw/hfi1/verbs.c                 |   2 -
 drivers/infiniband/hw/hfi1/verbs_txreq.c           |   2 +-
 drivers/infiniband/hw/hfi1/verbs_txreq.h           |   3 +-
 drivers/infiniband/hw/qib/qib_verbs.c              |   2 -
 drivers/infiniband/sw/rdmavt/mr.c                  |   2 +
 drivers/infiniband/sw/rdmavt/qp.c                  |   3 +-
 drivers/input/misc/uinput.c                        |  22 ++-
 drivers/input/mouse/synaptics.c                    |   2 +
 drivers/input/touchscreen/silead.c                 |   1 +
 drivers/misc/habanalabs/memory.c                   |   6 -
 drivers/misc/lkdtm/usercopy.c                      |  10 +-
 drivers/mmc/core/core.c                            |   5 +-
 drivers/mmc/core/sdio.c                            |  13 +-
 drivers/mmc/core/sdio_io.c                         |  77 ++++++++++
 drivers/mmc/core/sdio_irq.c                        |   4 +
 drivers/mmc/host/mtk-sd.c                          |  39 ++---
 drivers/mmc/host/renesas_sdhi_core.c               |   9 +-
 drivers/mmc/host/sdhci-pci-o2micro.c               |   5 +-
 drivers/net/can/flexcan.c                          |   2 +-
 drivers/net/can/xilinx_can.c                       |   2 +-
 drivers/net/dsa/mv88e6xxx/chip.c                   |   2 +-
 drivers/net/ethernet/hisilicon/hns/hns_ethtool.c   |   4 +
 drivers/net/ethernet/mediatek/mtk_eth_soc.c        |  15 +-
 drivers/net/ipvlan/ipvlan_main.c                   |   2 +-
 drivers/net/phy/phylink.c                          |  13 +-
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    |  17 ++-
 drivers/nvme/host/core.c                           |   3 +-
 drivers/nvme/target/io-cmd-bdev.c                  |   1 +
 drivers/parport/share.c                            |   2 +
 drivers/s390/net/qeth_l2_main.c                    |   2 +-
 drivers/s390/net/qeth_l3_main.c                    |  32 +++-
 drivers/scsi/smartpqi/smartpqi_init.c              |   6 +-
 drivers/scsi/ufs/ufshcd-pltfrm.c                   |  11 +-
 drivers/scsi/ufs/ufshcd.c                          |   3 +-
 drivers/staging/erofs/erofs_fs.h                   |  13 +-
 drivers/staging/erofs/internal.h                   |   2 +
 drivers/staging/erofs/super.c                      |  19 +++
 drivers/usb/chipidea/udc.c                         |  20 +++
 drivers/usb/host/xhci-ring.c                       |  15 +-
 drivers/usb/host/xhci.c                            |  25 +++-
 drivers/usb/host/xhci.h                            |   9 ++
 fs/btrfs/reada.c                                   |   5 +
 fs/cifs/cifsfs.c                                   |   1 +
 fs/cifs/cifsglob.h                                 |   5 +
 fs/cifs/connect.c                                  |   2 +
 fs/cifs/file.c                                     |   8 +-
 fs/cifs/smb2maperror.c                             |   2 +-
 fs/namespace.c                                     |   1 +
 fs/overlayfs/inode.c                               |  60 +++++++-
 fs/overlayfs/namei.c                               |   8 +
 fs/overlayfs/overlayfs.h                           |   3 +
 fs/overlayfs/ovl_entry.h                           |   6 +
 fs/overlayfs/super.c                               | 161 ++++++++++++++++++---
 fs/overlayfs/util.c                                |  12 ++
 fs/pnode.c                                         |   1 -
 include/linux/mmc/host.h                           |   1 +
 include/linux/mmc/sdio_func.h                      |   6 +
 include/net/bluetooth/hci_core.h                   |   3 +
 include/net/cfg80211.h                             |   3 +-
 kernel/trace/trace.c                               |   6 +-
 kernel/trace/trace.h                               |  18 +++
 kernel/trace/trace_kdb.c                           |   6 +-
 net/bluetooth/hci_conn.c                           |  10 +-
 net/bluetooth/l2cap_core.c                         |  33 ++++-
 net/can/af_can.c                                   |   1 +
 net/mac80211/ieee80211_i.h                         |   3 +
 net/mac80211/mlme.c                                |  12 +-
 net/mac80211/rx.c                                  |   2 +
 net/mac80211/tdls.c                                |  23 +++
 net/mac80211/util.c                                |   4 +-
 net/mac80211/wpa.c                                 |   7 +-
 net/wireless/core.c                                |   8 +-
 net/wireless/nl80211.c                             |  12 +-
 scripts/checkstack.pl                              |   2 +-
 scripts/package/Makefile                           |   2 +-
 security/apparmor/include/policy.h                 |  11 +-
 security/apparmor/policy_unpack.c                  |  49 +++++--
 tools/testing/selftests/cgroup/test_core.c         |   7 +-
 tools/testing/selftests/cgroup/test_memcontrol.c   |   4 +
 .../selftests/net/forwarding/router_broadcast.sh   |   5 +-
 tools/testing/selftests/pidfd/pidfd_test.c         |   4 +
 tools/testing/selftests/vm/Makefile                |   2 +
 tools/testing/selftests/vm/userfaultfd.c           |   2 +-
 143 files changed, 1295 insertions(+), 371 deletions(-)
author maintainer
#53 lore raw

PATCH 53/121 IB/hfi1: Validate page aligned for a given virtual address

[ Upstream commit 97736f36dbebf2cda2799db3b54717ba5b388255 ]

User applications can register memory regions for TID buffers that are not aligned on page boundaries. Hfi1 is expected to pin those pages in memory and cache the pages with mmu_rb. The rb tree will fail to insert pages that are not aligned correctly.

Validate whether a given virtual address is page aligned before pinning.

Fixes 7e7a436ecb6e ("staging/hfi1: Add TID entry program function body")
---
 drivers/infiniband/hw/hfi1/user_exp_rcv.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/infiniband/hw/hfi1/user_exp_rcv.c +3 -0
index 0cd71ce7cc71..3592a9ec155e 100644
@@ -324,6 +324,9 @@ int hfi1_user_exp_rcv_setup(struct hfi1_filedata *fd,
 	u32 *tidlist = NULL;
 	struct tid_user_buf *tidbuf;
 
+	if (!PAGE_ALIGNED(tinfo->vaddr))
+		return -EINVAL;
+
 	tidbuf = kzalloc(sizeof(*tidbuf), GFP_KERNEL);
 	if (!tidbuf)
 		return -ENOMEM;
Signature · 1 line
2.20.1
author maintainer
#50 lore raw

PATCH 50/121 IB/rdmavt: Fix alloc_qpn() WARN_ON()

In reply to Greg Kroah-Hartman

[ Upstream commit 2abae62a26a265129b364d8c1ef3be55e2c01309 ]

The qpn allocation logic has a WARN_ON() that intends to detect the use of an index that will introduce bits in the lower order bits of the QOS bits in the QPN.

Unfortunately, it has the following bugs:
- it misfires when wrapping QPN allocation for non-QOS
- it doesn't correctly detect low order QOS bits (despite the comment)

The WARN_ON() should not be applied to non-QOS (qos_shift == 1).

Additionally, it SHOULD test the qpn bits per the table below:

2 data VLs: [qp7, qp6, qp5, qp4, qp3, qp2, qp1] ^

              [  0,   0,   0,   0,   0,   0, sc0],  qp bit 1 always 0*
3-4 data VLs: [qp7, qp6, qp5, qp4, qp3, qp2, qp1] ^
              [  0,   0,   0,   0,   0, sc1, sc0], qp bits [21] always 0
5-8 data VLs: [qp7, qp6, qp5, qp4, qp3, qp2, qp1] ^
              [  0,   0,   0,   0, sc2, sc1, sc0] qp bits [321] always 0

Fix by qualifying the warning for qos_shift > 1 and producing the correct mask to insure the above bits are zero without generating a superfluous warning.

Fixes 501edc42446e ("IB/rdmavt: Correct warning during QPN allocation")
---
 drivers/infiniband/sw/rdmavt/qp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/infiniband/sw/rdmavt/qp.c +2 -1
index a34b9a2a32b6..a77436ee5ff7 100644
@@ -594,7 +594,8 @@ static int alloc_qpn(struct rvt_dev_info *rdi, struct rvt_qpn_table *qpt,
 			offset = qpt->incr | ((offset & 1) ^ 1);
 		}
 		/* there can be no set bits in low-order QoS bits */
-		WARN_ON(offset & (BIT(rdi->dparms.qos_shift) - 1));
+		WARN_ON(rdi->dparms.qos_shift > 1 &&
+			offset & ((BIT(rdi->dparms.qos_shift - 1) - 1) << 1));
 		qpn = mk_qpn(qpt, map, offset);
 	}
 
Signature · 1 line
2.20.1
author maintainer
#52 lore raw

PATCH 52/121 IB/{qib, hfi1, rdmavt}: Correct ibv_devinfo max_mr value

In reply to Greg Kroah-Hartman

[ Upstream commit 35164f5259a47ea756fa1deb3e463ac2a4f10dc9 ]

The command 'ibv_devinfo -v' reports 0 for max_mr.

Fix by assigning the query values after the mr lkey_table has been built rather than early on in the driver.

Fixes 7b1e2099adc8 ("IB/rdmavt: Move memory registration into rdmavt")
---
 drivers/infiniband/hw/hfi1/verbs.c    | 2 --
 drivers/infiniband/hw/qib/qib_verbs.c | 2 --
 drivers/infiniband/sw/rdmavt/mr.c     | 2 ++
 3 files changed, 2 insertions(+), 4 deletions(-)
drivers/infiniband/hw/hfi1/verbs.c +0 -2
index 55a56b3d7f83..ea68eeba3f22 100644
@@ -1355,8 +1355,6 @@ static void hfi1_fill_device_attr(struct hfi1_devdata *dd)
 	rdi->dparms.props.max_cq = hfi1_max_cqs;
 	rdi->dparms.props.max_ah = hfi1_max_ahs;
 	rdi->dparms.props.max_cqe = hfi1_max_cqes;
-	rdi->dparms.props.max_mr = rdi->lkey_table.max;
-	rdi->dparms.props.max_fmr = rdi->lkey_table.max;
 	rdi->dparms.props.max_map_per_fmr = 32767;
 	rdi->dparms.props.max_pd = hfi1_max_pds;
 	rdi->dparms.props.max_qp_rd_atom = HFI1_MAX_RDMA_ATOMIC;
drivers/infiniband/hw/qib/qib_verbs.c +0 -2
index 5ff32d32c61c..2c4e569ce438 100644
@@ -1459,8 +1459,6 @@ static void qib_fill_device_attr(struct qib_devdata *dd)
 	rdi->dparms.props.max_cq = ib_qib_max_cqs;
 	rdi->dparms.props.max_cqe = ib_qib_max_cqes;
 	rdi->dparms.props.max_ah = ib_qib_max_ahs;
-	rdi->dparms.props.max_mr = rdi->lkey_table.max;
-	rdi->dparms.props.max_fmr = rdi->lkey_table.max;
 	rdi->dparms.props.max_map_per_fmr = 32767;
 	rdi->dparms.props.max_qp_rd_atom = QIB_MAX_RDMA_ATOMIC;
 	rdi->dparms.props.max_qp_init_rd_atom = 255;
drivers/infiniband/sw/rdmavt/mr.c +2 -0
index 0bb6e39dd03a..b04d2173e3f4 100644
@@ -96,6 +96,8 @@ int rvt_driver_mr_init(struct rvt_dev_info *rdi)
 	for (i = 0; i < rdi->lkey_table.max; i++)
 		RCU_INIT_POINTER(rdi->lkey_table.table[i], NULL);
 
+	rdi->dparms.props.max_mr = rdi->lkey_table.max;
+	rdi->dparms.props.max_fmr = rdi->lkey_table.max;
 	return 0;
 }
 
Signature · 1 line
2.20.1
author maintainer
#56 lore raw

PATCH 56/121 xtensa: Fix section mismatch between memblock_reserve and mem_reserve

In reply to Greg Kroah-Hartman

[ Upstream commit adefd051a6707a6ca0ebad278d3c1c05c960fc3b ]

Since commit 9012d011660ea5cf2 ("compiler: allow all arches to enable CONFIG_OPTIMIZE_INLINING"), xtensa:tinyconfig fails to build with section mismatch errors.

WARNING: vmlinux.o(.text.unlikely+0x68): Section mismatch in reference
from the function ___pa()
to the function .meminit.text:memblock_reserve()
WARNING: vmlinux.o(.text.unlikely+0x74): Section mismatch in reference
from the function mem_reserve()
to the function .meminit.text:memblock_reserve()
FATAL: modpost: Section mismatches detected.

This was not seen prior to the above mentioned commit because mem_reserve() was always inlined.

Mark mem_reserve(() as __init_memblock to have it reside in the same section as memblock_reserve().

Message-Id: <[email protected]>

---
 arch/xtensa/kernel/setup.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
arch/xtensa/kernel/setup.c +2 -1
index 4ec6fbb696bf..a5139f1d9220 100644
@@ -310,7 +310,8 @@ extern char _SecondaryResetVector_text_start;
 extern char _SecondaryResetVector_text_end;
 #endif
 
-static inline int mem_reserve(unsigned long start, unsigned long end)
+static inline int __init_memblock mem_reserve(unsigned long start,
+					      unsigned long end)
 {
 	return memblock_reserve(start, end - start);
 }
Signature · 1 line
2.20.1
author maintainer
#57 lore raw

PATCH 57/121 kselftest/cgroup: fix unexpected testing failure on test_memcontrol

In reply to Greg Kroah-Hartman

[ Upstream commit f6131f28057d4fd8922599339e701a2504e0f23d ]

The cgroup testing relies on the root cgroup's subtree_control setting, If the 'memory' controller isn't set, all test cases will be failed as following:

$ sudo ./test_memcontrol
not ok 1 test_memcg_subtree_control
not ok 2 test_memcg_current
ok 3 # skip test_memcg_min
not ok 4 test_memcg_low
not ok 5 test_memcg_high
not ok 6 test_memcg_max
not ok 7 test_memcg_oom_events
ok 8 # skip test_memcg_swap_max
not ok 9 test_memcg_sock
not ok 10 test_memcg_oom_group_leaf_events
not ok 11 test_memcg_oom_group_parent_events
not ok 12 test_memcg_oom_group_score_events

To correct this unexpected failure, this patch write the 'memory' to subtree_control of root to get a right result.

---
 tools/testing/selftests/cgroup/test_memcontrol.c | 4 ++++
 1 file changed, 4 insertions(+)
tools/testing/selftests/cgroup/test_memcontrol.c +4 -0
index 6f339882a6ca..c19a97dd02d4 100644
@@ -1205,6 +1205,10 @@ int main(int argc, char **argv)
 	if (cg_read_strstr(root, "cgroup.controllers", "memory"))
 		ksft_exit_skip("memory controller isn't available\n");
 
+	if (cg_read_strstr(root, "cgroup.subtree_control", "memory"))
+		if (cg_write(root, "cgroup.subtree_control", "+memory"))
+			ksft_exit_skip("Failed to set memory controller\n");
+
 	for (i = 0; i < ARRAY_SIZE(tests); i++) {
 		switch (tests[i].fn(root)) {
 		case KSFT_PASS:
Signature · 1 line
2.20.1
author maintainer
#55 lore raw

PATCH 55/121 crypto: hmac - fix memory leak in hmac_init_tfm()

In reply to Greg Kroah-Hartman

[ Upstream commit 7829a0c1cb9c80debfb4fdb49b4d90019f2ea1ac ]

When I added the sanity check of 'descsize', I missed that the child hash tfm needs to be freed if the sanity check fails. Of course this should never happen, hence the use of WARN_ON(), but it should be fixed.

Fixes e1354400b25d ("crypto: hash - fix incorrect HASH_MAX_DESCSIZE")
---
 crypto/hmac.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
crypto/hmac.c +3 -1
index 4b8c8ee8f15c..c623778b36ba 100644
@@ -168,8 +168,10 @@ static int hmac_init_tfm(struct crypto_tfm *tfm)
 
 	parent->descsize = sizeof(struct shash_desc) +
 			   crypto_shash_descsize(hash);
-	if (WARN_ON(parent->descsize > HASH_MAX_DESCSIZE))
+	if (WARN_ON(parent->descsize > HASH_MAX_DESCSIZE)) {
+		crypto_free_shash(hash);
 		return -EINVAL;
+	}
 
 	ctx->hash = hash;
 	return 0;
Signature · 1 line
2.20.1
author maintainer
#54 lore raw

PATCH 54/121 MIPS: uprobes: remove set but not used variable epc

In reply to Greg Kroah-Hartman

[ Upstream commit f532beeeff0c0a3586cc15538bc52d249eb19e7c ]

Fixes gcc '-Wunused-but-set-variable' warning:

arch/mips/kernel/uprobes.c: In function 'arch_uprobe_pre_xol':
arch/mips/kernel/uprobes.c:115:17: warning: variable 'epc' set but not used [-Wunused-but-set-variable]

It's never used since introduction in commit 40e084a506eb ("MIPS: Add uprobes support.")

---
 arch/mips/kernel/uprobes.c | 3 ---
 1 file changed, 3 deletions(-)
arch/mips/kernel/uprobes.c +0 -3
index 4aaff3b3175c..6dbe4eab0a0e 100644
@@ -112,9 +112,6 @@ int arch_uprobe_pre_xol(struct arch_uprobe *aup, struct pt_regs *regs)
 	 */
 	aup->resume_epc = regs->cp0_epc + 4;
 	if (insn_has_delay_slot((union mips_instruction) aup->insn[0])) {
-		unsigned long epc;
-
-		epc = regs->cp0_epc;
 		__compute_return_epc_for_insn(regs,
 			(union mips_instruction) aup->insn[0]);
 		aup->resume_epc = regs->cp0_epc;
Signature · 1 line
2.20.1
author maintainer
#49 lore raw

PATCH 49/121 habanalabs: fix bug in checking huge page optimization

In reply to Greg Kroah-Hartman

[ Upstream commit d724170160f800fa8dfd3c0cdebb8b093570b504 ]

This patch fix a bug in the mmu code that checks whether we can use huge page mappings for host pages.

The code is supposed to enable huge page mappings only if ALL DMA addresses are aligned to 2MB AND the number of pages in each DMA chunk is a modulo of the number of pages in 2MB. However, the code ignored the first requirement for the first DMA chunk.

This patch fix that issue by making sure the requirement of address alignment is validated against all DMA chunks.

---
 drivers/misc/habanalabs/memory.c | 6 ------
 1 file changed, 6 deletions(-)
drivers/misc/habanalabs/memory.c +0 -6
index fadaf557603f..425442819d31 100644
@@ -675,11 +675,6 @@ static int init_phys_pg_pack_from_userptr(struct hl_ctx *ctx,
 
 		total_npages += npages;
 
-		if (first) {
-			first = false;
-			dma_addr &= PAGE_MASK_2MB;
-		}
-
 		if ((npages % PGS_IN_2MB_PAGE) ||
 					(dma_addr & (PAGE_SIZE_2MB - 1)))
 			is_huge_page_opt = false;
@@ -704,7 +699,6 @@ static int init_phys_pg_pack_from_userptr(struct hl_ctx *ctx,
 	phys_pg_pack->total_size = total_npages * page_size;
 
 	j = 0;
-	first = true;
 	for_each_sg(userptr->sgt->sgl, sg, userptr->sgt->nents, i) {
 		npages = get_sg_info(sg, &dma_addr);
 
Signature · 1 line
2.20.1
author maintainer
#47 lore raw

PATCH 47/121 parport: Fix mem leak in parport_register_dev_model

In reply to Greg Kroah-Hartman

[ Upstream commit 1c7ebeabc9e5ee12e42075a597de40fdb9059530 ]

BUG: memory leak
unreferenced object 0xffff8881df48cda0 (size 16):
  comm "syz-executor.0", pid 5077, jiffies 4295994670 (age 22.280s)
  hex dump (first 16 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000d2d0d5fe>] parport_register_dev_model+0x141/0x6e0 [parport]
    [<00000000782f6dab>] 0xffffffffc15d1196
    [<00000000d2ca6ae4>] platform_drv_probe+0x7e/0x100
    [<00000000628c2a94>] really_probe+0x342/0x4d0
    [<000000006874f5da>] driver_probe_device+0x8c/0x170
    [<00000000424de37a>] __device_attach_driver+0xda/0x100
    [<000000002acab09a>] bus_for_each_drv+0xfe/0x170
    [<000000003d9e5f31>] __device_attach+0x190/0x230
    [<0000000035d32f80>] bus_probe_device+0x123/0x140
    [<00000000a05ba627>] device_add+0x7cc/0xce0
    [<000000003f7560bf>] platform_device_add+0x230/0x3c0
    [<000000002a0be07d>] 0xffffffffc15d0949
    [<000000007361d8d2>] port_check+0x3b/0x50 [parport]
    [<000000004d67200f>] bus_for_each_dev+0x115/0x180
    [<000000003ccfd11c>] __parport_register_driver+0x1f0/0x210 [parport]
    [<00000000987f06fc>] 0xffffffffc15d803e

After commit 4e5a74f1db8d ("parport: Revert "parport: fix memory leak""), free_pardevice do not free par_dev->state, we should free it in error path of parport_register_dev_model before return.

Fixes 4e5a74f1db8d ("parport: Revert "parport: fix memory leak"")
---
 drivers/parport/share.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/parport/share.c +2 -0
index 5dc53d420ca8..7b4ee33c1935 100644
@@ -895,6 +895,7 @@ parport_register_dev_model(struct parport *port, const char *name,
 	par_dev->devmodel = true;
 	ret = device_register(&par_dev->dev);
 	if (ret) {
+		kfree(par_dev->state);
 		put_device(&par_dev->dev);
 		goto err_put_port;
 	}
@@ -912,6 +913,7 @@ parport_register_dev_model(struct parport *port, const char *name,
 			spin_unlock(&port->physport->pardevice_lock);
 			pr_debug("%s: cannot grant exclusive access for device %s\n",
 				 port->name, name);
+			kfree(par_dev->state);
 			device_unregister(&par_dev->dev);
 			goto err_put_port;
 		}
Signature · 1 line
2.20.1
author maintainer
#34 lore raw

PATCH 34/121 dmaengine: dw-axi-dmac: fix null dereference when pointer first is null

In reply to Greg Kroah-Hartman

[ Upstream commit 0788611c9a0925c607de536b2449de5ed98ef8df ]

In the unlikely event that axi_desc_get returns a null desc in the very first iteration of the while-loop the error exit path ends up calling axi_desc_put on a null pointer 'first' and this causes a null pointer dereference. Fix this by adding a null check on pointer 'first' before calling axi_desc_put.

Addresses-Coverity: ("Explicit null dereference")

Fixes 1fe20f1b8454 ("dmaengine: Introduce DW AXI DMAC driver")
---
 drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c +2 -1
index b2ac1d2c5b86..a1ce307c502f 100644
@@ -512,7 +512,8 @@ dma_chan_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst_adr,
 	return vchan_tx_prep(&chan->vc, &first->vd, flags);
 
 err_desc_get:
-	axi_desc_put(first);
+	if (first)
+		axi_desc_put(first);
 	return NULL;
 }
 
Signature · 1 line
2.20.1
author maintainer
#51 lore raw

PATCH 51/121 IB/hfi1: Insure freeze_work work_struct is canceled on shutdown

In reply to Greg Kroah-Hartman

[ Upstream commit 6d517353c70bb0818b691ca003afdcb5ee5ea44e ]

By code inspection, the freeze_work is never canceled.

Fix by adding a cancel_work_sync in the shutdown path to insure it is no longer running.

---
 drivers/infiniband/hw/hfi1/chip.c | 1 +
 1 file changed, 1 insertion(+)
drivers/infiniband/hw/hfi1/chip.c +1 -0
index e02d9a739e9c..597f2f02f3a8 100644
@@ -9848,6 +9848,7 @@ void hfi1_quiet_serdes(struct hfi1_pportdata *ppd)
 
 	/* disable the port */
 	clear_rcvctrl(dd, RCV_CTRL_RCV_PORT_ENABLE_SMASK);
+	cancel_work_sync(&ppd->freeze_work);
 }
 
 static inline int init_cpu_counters(struct hfi1_devdata *dd)
Signature · 1 line
2.20.1
author maintainer
#7 lore raw

PATCH 7/121 mmc: core: Add sdio_retune_hold_now() and sdio_retune_release()

In reply to Greg Kroah-Hartman

From: Douglas Anderson <[email protected]>

commit b4c9f938d542d5f88c501744d2d12fad4fd2915f upstream.

We want SDIO drivers to be able to temporarily stop retuning when the driver knows that the SDIO card is not in a state where retuning will work (maybe because the card is asleep). We'll move the relevant functions to a place where drivers can call them.

---
 drivers/mmc/core/sdio_io.c    |   40 ++++++++++++++++++++++++++++++++++++++++
 include/linux/mmc/sdio_func.h |    3 +++
 2 files changed, 43 insertions(+)
drivers/mmc/core/sdio_io.c +40 -0
@@ -19,6 +19,7 @@
 #include "sdio_ops.h"
 #include "core.h"
 #include "card.h"
+#include "host.h"
 
 /**
  *	sdio_claim_host - exclusively claim a bus for a certain SDIO function
@@ -775,3 +776,42 @@ void sdio_retune_crc_enable(struct sdio_
 	func->card->host->retune_crc_disable = false;
 }
 EXPORT_SYMBOL_GPL(sdio_retune_crc_enable);
+
+/**
+ *	sdio_retune_hold_now - start deferring retuning requests till release
+ *	@func: SDIO function attached to host
+ *
+ *	This function can be called if it's currently a bad time to do
+ *	a retune of the SDIO card.  Retune requests made during this time
+ *	will be held and we'll actually do the retune sometime after the
+ *	release.
+ *
+ *	This function could be useful if an SDIO card is in a power state
+ *	where it can respond to a small subset of commands that doesn't
+ *	include the retuning command.  Care should be taken when using
+ *	this function since (presumably) the retuning request we might be
+ *	deferring was made for a good reason.
+ *
+ *	This function should be called while the host is claimed.
+ */
+void sdio_retune_hold_now(struct sdio_func *func)
+{
+	mmc_retune_hold_now(func->card->host);
+}
+EXPORT_SYMBOL_GPL(sdio_retune_hold_now);
+
+/**
+ *	sdio_retune_release - signal that it's OK to retune now
+ *	@func: SDIO function attached to host
+ *
+ *	This is the complement to sdio_retune_hold_now().  Calling this
+ *	function won't make a retune happen right away but will allow
+ *	them to be scheduled normally.
+ *
+ *	This function should be called while the host is claimed.
+ */
+void sdio_retune_release(struct sdio_func *func)
+{
+	mmc_retune_release(func->card->host);
+}
+EXPORT_SYMBOL_GPL(sdio_retune_release);
include/linux/mmc/sdio_func.h +3 -0
@@ -162,4 +162,7 @@ extern int sdio_set_host_pm_flags(struct
 extern void sdio_retune_crc_disable(struct sdio_func *func);
 extern void sdio_retune_crc_enable(struct sdio_func *func);
 
+extern void sdio_retune_hold_now(struct sdio_func *func);
+extern void sdio_retune_release(struct sdio_func *func);
+
 #endif /* LINUX_MMC_SDIO_FUNC_H */
author maintainer
#45 lore raw

PATCH 45/121 fpga: dfl: afu: Pass the correct device to dma_mapping_error()

In reply to Greg Kroah-Hartman

[ Upstream commit 13069847a475b60069918dc9971f5adb42811ce3 ]

dma_mapping_error() was being called on a different device struct than what was passed to map/unmap. Besides rendering the error checking ineffective, it caused a debug splat with CONFIG_DMA_API_DEBUG.

---
 drivers/fpga/dfl-afu-dma-region.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/fpga/dfl-afu-dma-region.c +1 -1
index e18a786fc943..cd68002ac097 100644
@@ -399,7 +399,7 @@ int afu_dma_map_region(struct dfl_feature_platform_data *pdata,
 				    region->pages[0], 0,
 				    region->length,
 				    DMA_BIDIRECTIONAL);
-	if (dma_mapping_error(&pdata->dev->dev, region->iova)) {
+	if (dma_mapping_error(dfl_fpga_pdata_to_parent(pdata), region->iova)) {
 		dev_err(&pdata->dev->dev, "failed to map for dma\n");
 		ret = -EFAULT;
 		goto unpin_pages;
Signature · 1 line
2.20.1
author maintainer
#46 lore raw

PATCH 46/121 fpga: dfl: Add lockdep classes for pdata->lock

In reply to Greg Kroah-Hartman

[ Upstream commit dfe3de8d397bf878b31864d4e489d41118ec475f ]

struct dfl_feature_platform_data (and it's mutex) is used by both fme and port devices, and when lockdep is enabled it complains about nesting between these locks. Tell lockdep about the difference so it can track each class separately.

Here's the lockdep complaint:

[  409.680668] WARNING: possible recursive locking detected
[  409.685983] 5.1.0-rc3.fpga+ #1 Tainted: G            E
[  409.691469] --------------------------------------------
[  409.696779] fpgaconf/9348 is trying to acquire lock:
[  409.701746] 00000000a443fe2e (&pdata->lock){+.+.}, at: port_enable_set+0x24/0x60 [dfl_afu]
[  409.710006]
[  409.710006] but task is already holding lock:
[  409.715837] 0000000063b78782 (&pdata->lock){+.+.}, at: fme_pr_ioctl+0x21d/0x330 [dfl_fme]
[  409.724012]
[  409.724012] other info that might help us debug this:
[  409.730535]  Possible unsafe locking scenario:
[  409.730535]
[  409.736457]        CPU0
[  409.738910]        ----
[  409.741360]   lock(&pdata->lock);
[  409.744679]   lock(&pdata->lock);
[  409.747999]
[  409.747999]  *** DEADLOCK ***
[  409.747999]
[  409.753920]  May be due to missing lock nesting notation
[  409.753920]
[  409.760704] 4 locks held by fpgaconf/9348:
[  409.764805]  #0: 0000000063b78782 (&pdata->lock){+.+.}, at: fme_pr_ioctl+0x21d/0x330 [dfl_fme]
[  409.773408]  #1: 00000000213c8a66 (&region->mutex){+.+.}, at: fpga_region_program_fpga+0x24/0x200 [fpga_region]
[  409.783489]  #2: 00000000fe63afb9 (&mgr->ref_mutex){+.+.}, at: fpga_mgr_lock+0x15/0x40 [fpga_mgr]
[  409.792354]  #3: 000000000b2285c5 (&bridge->mutex){+.+.}, at: __fpga_bridge_get+0x26/0xa0 [fpga_bridge]
[  409.801740]
[  409.801740] stack backtrace:
[  409.806102] CPU: 45 PID: 9348 Comm: fpgaconf Kdump: loaded Tainted: G            E     5.1.0-rc3.fpga+ #1
[  409.815658] Hardware name: Intel Corporation S2600BT/S2600BT, BIOS SE5C620.86B.01.00.0763.022420181017 02/24/2018
[  409.825911] Call Trace:
[  409.828369]  dump_stack+0x5e/0x8b
[  409.831686]  __lock_acquire+0xf3d/0x10e0
[  409.835612]  ? find_held_lock+0x3c/0xa0
[  409.839451]  lock_acquire+0xbc/0x1d0
[  409.843030]  ? port_enable_set+0x24/0x60 [dfl_afu]
[  409.847823]  ? port_enable_set+0x24/0x60 [dfl_afu]
[  409.852616]  __mutex_lock+0x86/0x970
[  409.856195]  ? port_enable_set+0x24/0x60 [dfl_afu]
[  409.860989]  ? port_enable_set+0x24/0x60 [dfl_afu]
[  409.865777]  ? __mutex_unlock_slowpath+0x4b/0x290
[  409.870486]  port_enable_set+0x24/0x60 [dfl_afu]
[  409.875106]  fpga_bridges_disable+0x36/0x50 [fpga_bridge]
[  409.880502]  fpga_region_program_fpga+0xea/0x200 [fpga_region]
[  409.886338]  fme_pr_ioctl+0x13e/0x330 [dfl_fme]
[  409.890870]  fme_ioctl+0x66/0xe0 [dfl_fme]
[  409.894973]  do_vfs_ioctl+0xa9/0x720
[  409.898548]  ? lockdep_hardirqs_on+0xf0/0x1a0
[  409.902907]  ksys_ioctl+0x60/0x90
[  409.906225]  __x64_sys_ioctl+0x16/0x20
[  409.909981]  do_syscall_64+0x5a/0x220
[  409.913644]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  409.918698] RIP: 0033:0x7f9d31b9b8d7
[  409.922276] Code: 44 00 00 48 8b 05 b9 15 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 89 15 2d 00 f7 d8 64 89 01 48
[  409.941020] RSP: 002b:00007ffe4cae0d68 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[  409.948588] RAX: ffffffffffffffda RBX: 00007f9d32ade6a0 RCX: 00007f9d31b9b8d7
[  409.955719] RDX: 00007ffe4cae0df0 RSI: 000000000000b680 RDI: 0000000000000003
[  409.962852] RBP: 0000000000000003 R08: 00007f9d2b70a177 R09: 00007ffe4cae0e40
[  409.969984] R10: 00007ffe4cae0160 R11: 0000000000000202 R12: 00007ffe4cae0df0
[  409.977115] R13: 000000000000b680 R14: 0000000000000000 R15: 00007ffe4cae0f60
---
 drivers/fpga/dfl.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)
drivers/fpga/dfl.c +15 -1
index 2c09e502e721..c25217cde5ca 100644
@@ -40,6 +40,13 @@ enum dfl_fpga_devt_type {
 	DFL_FPGA_DEVT_MAX,
 };
 
+static struct lock_class_key dfl_pdata_keys[DFL_ID_MAX];
+
+static const char *dfl_pdata_key_strings[DFL_ID_MAX] = {
+	"dfl-fme-pdata",
+	"dfl-port-pdata",
+};
+
 /**
  * dfl_dev_info - dfl feature device information.
  * @name: name string of the feature platform device.
@@ -443,11 +450,16 @@ static int build_info_commit_dev(struct build_feature_devs_info *binfo)
 	struct platform_device *fdev = binfo->feature_dev;
 	struct dfl_feature_platform_data *pdata;
 	struct dfl_feature_info *finfo, *p;
+	enum dfl_id_type type;
 	int ret, index = 0;
 
 	if (!fdev)
 		return 0;
 
+	type = feature_dev_id_type(fdev);
+	if (WARN_ON_ONCE(type >= DFL_ID_MAX))
+		return -EINVAL;
+
 	/*
 	 * we do not need to care for the memory which is associated with
 	 * the platform device. After calling platform_device_unregister(),
@@ -463,6 +475,8 @@ static int build_info_commit_dev(struct build_feature_devs_info *binfo)
 	pdata->num = binfo->feature_num;
 	pdata->dfl_cdev = binfo->cdev;
 	mutex_init(&pdata->lock);
+	lockdep_set_class_and_name(&pdata->lock, &dfl_pdata_keys[type],
+				   dfl_pdata_key_strings[type]);
 
 	/*
 	 * the count should be initialized to 0 to make sure
@@ -497,7 +511,7 @@ static int build_info_commit_dev(struct build_feature_devs_info *binfo)
 
 	ret = platform_device_add(binfo->feature_dev);
 	if (!ret) {
-		if (feature_dev_id_type(binfo->feature_dev) == PORT_ID)
+		if (type == PORT_ID)
 			dfl_fpga_cdev_add_port_dev(binfo->cdev,
 						   binfo->feature_dev);
 		else
Signature · 1 line
2.20.1
author maintainer
#43 lore raw

PATCH 43/121 MIPS: mark ginvt() as __always_inline

In reply to Greg Kroah-Hartman

[ Upstream commit 6074c33c6b2eabc70867ef76d57ca256e9ea9da7 ]

To meet the 'i' (immediate) constraint for the asm operands, this function must be always inlined.

---
 arch/mips/include/asm/ginvt.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/mips/include/asm/ginvt.h +1 -1
index 49c6dbe37338..6eb7c2b94dc7 100644
@@ -19,7 +19,7 @@ _ASM_MACRO_1R1I(ginvt, rs, type,
 # define _ASM_SET_GINV
 #endif
 
-static inline void ginvt(unsigned long addr, enum ginvt_type type)
+static __always_inline void ginvt(unsigned long addr, enum ginvt_type type)
 {
 	asm volatile(
 		".set	push\n"
Signature · 1 line
2.20.1
author maintainer
#30 lore raw

PATCH 30/121 brcmfmac: sdio: Dont tune while the card is off

In reply to Greg Kroah-Hartman

From: Douglas Anderson <[email protected]>

commit 65dade6044079a5c206fd1803642ff420061417a upstream.

When Broadcom SDIO cards are idled they go to sleep and a whole separate subsystem takes over their SDIO communication. This is the Always-On-Subsystem (AOS) and it can't handle tuning requests.

Specifically, as tested on rk3288-veyron-minnie (which reports having BCM4354/1 in dmesg), if I force a retune in brcmf_sdio_kso_control() when "on = 1" (aka we're transition from sleep to wake) by whacking:
bus->sdiodev->func1->card->host->need_retune = 1
...then I can often see tuning fail. In this case dw_mmc reports "All phases bad!"). Note that I don't get 100% failure, presumably because sometimes the card itself has already transitioned away from the AOS itself by the time we try to wake it up. If I force retuning when "on = 0" (AKA force retuning right before sending the command to go to sleep) then retuning is always OK.

NOTE: we need _both_ this patch and the patch to avoid triggering tuning due to CRC errors in the sleep/wake transition, AKA ("brcmfmac:
sdio: Disable auto-tuning around commands expected to fail"). Though both patches handle issues with Broadcom's AOS, the problems are distinct:
1. We want to defer (but not ignore) asynchronous (like timer-requested) tuning requests till the card is awake. However, we want to ignore CRC errors during the transition, we don't want to queue deferred tuning request.
2. You could imagine that the AOS could implement retuning but we could still get errors while transitioning in and out of the AOS. Similarly you could imagine a seamless transition into and out of the AOS (with no CRC errors) even if the AOS couldn't handle tuning.

ALSO NOTE: presumably there is never a desperate need to retune in order to wake up the card, since doing so is impossible. Luckily the only way the card can get into sleep state is if we had a good enough tuning to send it the command to put it into sleep, so presumably that "good enough" tuning is enough to wake us up, at least with a few retries.

---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c |    7 +++++++
 1 file changed, 7 insertions(+)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +7 -0
@@ -678,6 +678,10 @@ brcmf_sdio_kso_control(struct brcmf_sdio
 
 	sdio_retune_crc_disable(bus->sdiodev->func1);
 
+	/* Cannot re-tune if device is asleep; defer till we're awake */
+	if (on)
+		sdio_retune_hold_now(bus->sdiodev->func1);
+
 	wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
 	/* 1st KSO write goes to AOS wake up core if device is asleep  */
 	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err);
@@ -738,6 +742,9 @@ brcmf_sdio_kso_control(struct brcmf_sdio
 	if (try_cnt > MAX_KSO_ATTEMPTS)
 		brcmf_err("max tries: rd_val=0x%x err=%d\n", rd_val, err);
 
+	if (on)
+		sdio_retune_release(bus->sdiodev->func1);
+
 	sdio_retune_crc_enable(bus->sdiodev->func1);
 
 	return err;
author maintainer
#3 lore raw

PATCH 3/121 mmc: sdhi: disallow HS400 for M3-W ES1.2, RZ/G2M, and V3H

In reply to Greg Kroah-Hartman

From: Wolfram Sang <[email protected]>

commit 97bf85b6ec9e6597ce81c79b26a28f7918fc4eaf upstream.

Our HW engineers informed us that HS400 is not working on these SoC revisions.

Fixes 0f4e2054c971 ("mmc: renesas_sdhi: disable HS400 on H3 ES1.x and M3-W ES1.[012]")
---
 drivers/mmc/host/renesas_sdhi_core.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/mmc/host/renesas_sdhi_core.c +7 -2
@@ -620,11 +620,16 @@ static const struct renesas_sdhi_quirks
 	.hs400_4taps = true,
 };
 
+static const struct renesas_sdhi_quirks sdhi_quirks_nohs400 = {
+	.hs400_disabled = true,
+};
+
 static const struct soc_device_attribute sdhi_quirks_match[]  = {
 	{ .soc_id = "r8a7795", .revision = "ES1.*", .data = &sdhi_quirks_h3_m3w_es1 },
 	{ .soc_id = "r8a7795", .revision = "ES2.0", .data = &sdhi_quirks_h3_es2 },
-	{ .soc_id = "r8a7796", .revision = "ES1.0", .data = &sdhi_quirks_h3_m3w_es1 },
-	{ .soc_id = "r8a7796", .revision = "ES1.1", .data = &sdhi_quirks_h3_m3w_es1 },
+	{ .soc_id = "r8a7796", .revision = "ES1.[012]", .data = &sdhi_quirks_h3_m3w_es1 },
+	{ .soc_id = "r8a774a1", .revision = "ES1.[012]", .data = &sdhi_quirks_h3_m3w_es1 },
+	{ .soc_id = "r8a77980", .data = &sdhi_quirks_nohs400 },
 	{ /* Sentinel. */ },
 };
 
author maintainer
#6 lore raw

PATCH 6/121 mmc: core: API to temporarily disable retuning for SDIO CRC errors

In reply to Greg Kroah-Hartman

From: Douglas Anderson <[email protected]>

commit 0a55f4ab9678413a01e740c86e9367ba0c612b36 upstream.

Normally when the MMC core sees an "-EILSEQ" error returned by a host controller then it will trigger a retuning of the card. This is generally a good idea.

However, if a command is expected to sometimes cause transfer errors then these transfer errors shouldn't cause a re-tuning. This re-tuning will be a needless waste of time. One example case where a transfer is expected to cause errors is when transitioning between idle (sometimes referred to as "sleep" in Broadcom code) and active state on certain Broadcom WiFi SDIO cards. Specifically if the card was already transitioning between states when the command was sent it could cause an error on the SDIO bus.

Let's add an API that the SDIO function drivers can call that will temporarily disable the auto-tuning functionality. Then we can add a call to this in the Broadcom WiFi driver and any other driver that might have similar needs.

NOTE: this makes the assumption that the card is already tuned well enough that it's OK to disable the auto-retuning during one of these error-prone situations. Presumably the driver code performing the error-prone transfer knows how to recover / retry from errors. ...and after we can get back to a state where transfers are no longer error-prone then we can enable the auto-retuning again. If we truly find ourselves in a case where the card needs to be retuned sometimes to handle one of these error-prone transfers then we can always try a few transfers first without auto-retuning and then re-try with auto-retuning if the first few fail.

Without this change on rk3288-veyron-minnie I periodically see this in the logs of a machine just sitting there idle:
dwmmc_rockchip ff0d0000.dwmmc: Successfully tuned phase to XYZ

---
 drivers/mmc/core/core.c       |    5 +++--
 drivers/mmc/core/sdio_io.c    |   37 +++++++++++++++++++++++++++++++++++++
 include/linux/mmc/host.h      |    1 +
 include/linux/mmc/sdio_func.h |    3 +++
 4 files changed, 44 insertions(+), 2 deletions(-)
drivers/mmc/core/core.c +3 -2
@@ -144,8 +144,9 @@ void mmc_request_done(struct mmc_host *h
 	int err = cmd->error;
 
 	/* Flag re-tuning needed on CRC errors */
-	if ((cmd->opcode != MMC_SEND_TUNING_BLOCK &&
-	    cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200) &&
+	if (cmd->opcode != MMC_SEND_TUNING_BLOCK &&
+	    cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200 &&
+	    !host->retune_crc_disable &&
 	    (err == -EILSEQ || (mrq->sbc && mrq->sbc->error == -EILSEQ) ||
 	    (mrq->data && mrq->data->error == -EILSEQ) ||
 	    (mrq->stop && mrq->stop->error == -EILSEQ)))
drivers/mmc/core/sdio_io.c +37 -0
@@ -738,3 +738,40 @@ int sdio_set_host_pm_flags(struct sdio_f
 	return 0;
 }
 EXPORT_SYMBOL_GPL(sdio_set_host_pm_flags);
+
+/**
+ *	sdio_retune_crc_disable - temporarily disable retuning on CRC errors
+ *	@func: SDIO function attached to host
+ *
+ *	If the SDIO card is known to be in a state where it might produce
+ *	CRC errors on the bus in response to commands (like if we know it is
+ *	transitioning between power states), an SDIO function driver can
+ *	call this function to temporarily disable the SD/MMC core behavior of
+ *	triggering an automatic retuning.
+ *
+ *	This function should be called while the host is claimed and the host
+ *	should remain claimed until sdio_retune_crc_enable() is called.
+ *	Specifically, the expected sequence of calls is:
+ *	- sdio_claim_host()
+ *	- sdio_retune_crc_disable()
+ *	- some number of calls like sdio_writeb() and sdio_readb()
+ *	- sdio_retune_crc_enable()
+ *	- sdio_release_host()
+ */
+void sdio_retune_crc_disable(struct sdio_func *func)
+{
+	func->card->host->retune_crc_disable = true;
+}
+EXPORT_SYMBOL_GPL(sdio_retune_crc_disable);
+
+/**
+ *	sdio_retune_crc_enable - re-enable retuning on CRC errors
+ *	@func: SDIO function attached to host
+ *
+ *	This is the compement to sdio_retune_crc_disable().
+ */
+void sdio_retune_crc_enable(struct sdio_func *func)
+{
+	func->card->host->retune_crc_disable = false;
+}
+EXPORT_SYMBOL_GPL(sdio_retune_crc_enable);
include/linux/mmc/host.h +1 -0
@@ -398,6 +398,7 @@ struct mmc_host {
 	unsigned int		retune_now:1;	/* do re-tuning at next req */
 	unsigned int		retune_paused:1; /* re-tuning is temporarily disabled */
 	unsigned int		use_blk_mq:1;	/* use blk-mq */
+	unsigned int		retune_crc_disable:1; /* don't trigger retune upon crc */
 
 	int			rescan_disable;	/* disable card detection */
 	int			rescan_entered;	/* used with nonremovable devices */
include/linux/mmc/sdio_func.h +3 -0
@@ -159,4 +159,7 @@ extern void sdio_f0_writeb(struct sdio_f
 extern mmc_pm_flag_t sdio_get_host_pm_caps(struct sdio_func *func);
 extern int sdio_set_host_pm_flags(struct sdio_func *func, mmc_pm_flag_t flags);
 
+extern void sdio_retune_crc_disable(struct sdio_func *func);
+extern void sdio_retune_crc_enable(struct sdio_func *func);
+
 #endif /* LINUX_MMC_SDIO_FUNC_H */
author maintainer
#29 lore raw

PATCH 29/121 brcmfmac: sdio: Disable auto-tuning around commands expected to fail

In reply to Greg Kroah-Hartman

From: Douglas Anderson <[email protected]>

commit 2de0b42da263c97d330d276f5ccf7c4470e3324f upstream.

There are certain cases, notably when transitioning between sleep and active state, when Broadcom SDIO WiFi cards will produce errors on the SDIO bus. This is evident from the source code where you can see that we try commands in a loop until we either get success or we've tried too many times. The comment in the code reinforces this by saying "just one write attempt may fail"

Unfortunately these failures sometimes end up causing an "-EILSEQ" back to the core which triggers a retuning of the SDIO card and that blocks all traffic to the card until it's done.

Let's disable retuning around the commands we expect might fail.

---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c |    4 ++++
 1 file changed, 4 insertions(+)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +4 -0
@@ -676,6 +676,8 @@ brcmf_sdio_kso_control(struct brcmf_sdio
 
 	brcmf_dbg(TRACE, "Enter: on=%d\n", on);
 
+	sdio_retune_crc_disable(bus->sdiodev->func1);
+
 	wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
 	/* 1st KSO write goes to AOS wake up core if device is asleep  */
 	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err);
@@ -736,6 +738,8 @@ brcmf_sdio_kso_control(struct brcmf_sdio
 	if (try_cnt > MAX_KSO_ATTEMPTS)
 		brcmf_err("max tries: rd_val=0x%x err=%d\n", rd_val, err);
 
+	sdio_retune_crc_enable(bus->sdiodev->func1);
+
 	return err;
 }
 
author maintainer
#20 lore raw

PATCH 20/121 iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller

In reply to Greg Kroah-Hartman

From: Lorenzo Bianconi <[email protected]>

commit bce0d57db388cdb1c1931d0aa7d31c77b590e0f0 upstream.

Properly suspend/resume i2c slaves connected to st_lsm6dsx master controller if the CPU goes in suspended state

Fixes c91c1c844ebd ("imu: st_lsm6dsx: add i2c embedded controller support")
---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h      |    2 ++
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c |   25 +++++++++++++++++--------
 2 files changed, 19 insertions(+), 8 deletions(-)
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +2 -0
@@ -265,6 +265,7 @@ struct st_lsm6dsx_sensor {
  * @conf_lock: Mutex to prevent concurrent FIFO configuration update.
  * @page_lock: Mutex to prevent concurrent memory page configuration.
  * @fifo_mode: FIFO operating mode supported by the device.
+ * @suspend_mask: Suspended sensor bitmask.
  * @enable_mask: Enabled sensor bitmask.
  * @ts_sip: Total number of timestamp samples in a given pattern.
  * @sip: Total number of samples (acc/gyro/ts) in a given pattern.
@@ -282,6 +283,7 @@ struct st_lsm6dsx_hw {
 	struct mutex page_lock;
 
 	enum st_lsm6dsx_fifo_mode fifo_mode;
+	u8 suspend_mask;
 	u8 enable_mask;
 	u8 ts_sip;
 	u8 sip;
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +17 -8
@@ -1023,8 +1023,6 @@ static int __maybe_unused st_lsm6dsx_sus
 {
 	struct st_lsm6dsx_hw *hw = dev_get_drvdata(dev);
 	struct st_lsm6dsx_sensor *sensor;
-	const struct st_lsm6dsx_reg *reg;
-	unsigned int data;
 	int i, err = 0;
 
 	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
@@ -1035,12 +1033,16 @@ static int __maybe_unused st_lsm6dsx_sus
 		if (!(hw->enable_mask & BIT(sensor->id)))
 			continue;
 
-		reg = &st_lsm6dsx_odr_table[sensor->id].reg;
-		data = ST_LSM6DSX_SHIFT_VAL(0, reg->mask);
-		err = st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask,
-						    data);
+		if (sensor->id == ST_LSM6DSX_ID_EXT0 ||
+		    sensor->id == ST_LSM6DSX_ID_EXT1 ||
+		    sensor->id == ST_LSM6DSX_ID_EXT2)
+			err = st_lsm6dsx_shub_set_enable(sensor, false);
+		else
+			err = st_lsm6dsx_sensor_set_enable(sensor, false);
 		if (err < 0)
 			return err;
+
+		hw->suspend_mask |= BIT(sensor->id);
 	}
 
 	if (hw->fifo_mode != ST_LSM6DSX_FIFO_BYPASS)
@@ -1060,12 +1062,19 @@ static int __maybe_unused st_lsm6dsx_res
 			continue;
 
 		sensor = iio_priv(hw->iio_devs[i]);
-		if (!(hw->enable_mask & BIT(sensor->id)))
+		if (!(hw->suspend_mask & BIT(sensor->id)))
 			continue;
 
-		err = st_lsm6dsx_set_odr(sensor, sensor->odr);
+		if (sensor->id == ST_LSM6DSX_ID_EXT0 ||
+		    sensor->id == ST_LSM6DSX_ID_EXT1 ||
+		    sensor->id == ST_LSM6DSX_ID_EXT2)
+			err = st_lsm6dsx_shub_set_enable(sensor, true);
+		else
+			err = st_lsm6dsx_sensor_set_enable(sensor, true);
 		if (err < 0)
 			return err;
+
+		hw->suspend_mask &= ~BIT(sensor->id);
 	}
 
 	if (hw->enable_mask)
author maintainer
#26 lore raw

PATCH 26/121 apparmor: enforce nullbyte at end of tag string

In reply to Greg Kroah-Hartman

From: Jann Horn <[email protected]>

commit 8404d7a674c49278607d19726e0acc0cae299357 upstream.

A packed AppArmor policy contains null-terminated tag strings that are read by unpack_nameX(). However, unpack_nameX() uses string functions on them without ensuring that they are actually null-terminated, potentially leading to out-of-bounds accesses.

Make sure that the tag string is null-terminated before passing it to strcmp().

Fixes 736ec752d95e ("AppArmor: policy routines for loading and unpacking policy")
---
 security/apparmor/policy_unpack.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
security/apparmor/policy_unpack.c +1 -1
@@ -276,7 +276,7 @@ static bool unpack_nameX(struct aa_ext *
 		char *tag = NULL;
 		size_t size = unpack_u16_chunk(e, &tag);
 		/* if a name is specified it must match. otherwise skip tag */
-		if (name && (!size || strcmp(name, tag)))
+		if (name && (!size || tag[size-1] != '\0' || strcmp(name, tag)))
 			goto fail;
 	} else if (name) {
 		/* if a name is specified and there is no name tag fail */
author maintainer
#23 lore raw

PATCH 23/121 Input: uinput - add compat ioctl number translation for UI_*_FF_UPLOAD

In reply to Greg Kroah-Hartman

From: Andrey Smirnov <[email protected]>

commit 7c7da40da1640ce6814dab1e8031b44e19e5a3f6 upstream.

In the case of compat syscall ioctl numbers for UI_BEGIN_FF_UPLOAD and UI_END_FF_UPLOAD need to be adjusted before being passed on uinput_ioctl_handler() since code built with -m32 will be passing slightly different values. Extend the code already covering UI_SET_PHYS to cover UI_BEGIN_FF_UPLOAD and UI_END_FF_UPLOAD as well.

---
 drivers/input/misc/uinput.c |   22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)
drivers/input/misc/uinput.c +20 -2
@@ -1051,13 +1051,31 @@ static long uinput_ioctl(struct file *fi
 
 #ifdef CONFIG_COMPAT
 
-#define UI_SET_PHYS_COMPAT	_IOW(UINPUT_IOCTL_BASE, 108, compat_uptr_t)
+/*
+ * These IOCTLs change their size and thus their numbers between
+ * 32 and 64 bits.
+ */
+#define UI_SET_PHYS_COMPAT		\
+	_IOW(UINPUT_IOCTL_BASE, 108, compat_uptr_t)
+#define UI_BEGIN_FF_UPLOAD_COMPAT	\
+	_IOWR(UINPUT_IOCTL_BASE, 200, struct uinput_ff_upload_compat)
+#define UI_END_FF_UPLOAD_COMPAT		\
+	_IOW(UINPUT_IOCTL_BASE, 201, struct uinput_ff_upload_compat)
 
 static long uinput_compat_ioctl(struct file *file,
 				unsigned int cmd, unsigned long arg)
 {
-	if (cmd == UI_SET_PHYS_COMPAT)
+	switch (cmd) {
+	case UI_SET_PHYS_COMPAT:
 		cmd = UI_SET_PHYS;
+		break;
+	case UI_BEGIN_FF_UPLOAD_COMPAT:
+		cmd = UI_BEGIN_FF_UPLOAD;
+		break;
+	case UI_END_FF_UPLOAD_COMPAT:
+		cmd = UI_END_FF_UPLOAD;
+		break;
+	}
 
 	return uinput_ioctl_handler(file, cmd, arg, compat_ptr(arg));
 }
author maintainer
#10 lore raw

PATCH 10/121 usb: chipidea: udc: workaround for endpoint conflict issue

In reply to Greg Kroah-Hartman

From: Peter Chen <[email protected]>

commit c19dffc0a9511a7d7493ec21019aefd97e9a111b upstream.

An endpoint conflict occurs when the USB is working in device mode during an isochronous communication. When the endpointA IN direction is an isochronous IN endpoint, and the host sends an IN token to endpointA on another device, then the OUT transaction may be missed regardless the OUT endpoint number. Generally, this occurs when the device is connected to the host through a hub and other devices are connected to the same hub.

The affected OUT endpoint can be either control, bulk, isochronous, or an interrupt endpoint. After the OUT endpoint is primed, if an IN token to the same endpoint number on another device is received, then the OUT endpoint may be unprimed (cannot be detected by software), which causes this endpoint to no longer respond to the host OUT token, and thus, no corresponding interrupt occurs.

There is no good workaround for this issue, the only thing the software could do is numbering isochronous IN from the highest endpoint since we have observed most of device number endpoint from the lowest.

---
 drivers/usb/chipidea/udc.c |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
drivers/usb/chipidea/udc.c +20 -0
@@ -1622,6 +1622,25 @@ static int ci_udc_pullup(struct usb_gadg
 static int ci_udc_start(struct usb_gadget *gadget,
 			 struct usb_gadget_driver *driver);
 static int ci_udc_stop(struct usb_gadget *gadget);
+
+/* Match ISOC IN from the highest endpoint */
+static struct usb_ep *ci_udc_match_ep(struct usb_gadget *gadget,
+			      struct usb_endpoint_descriptor *desc,
+			      struct usb_ss_ep_comp_descriptor *comp_desc)
+{
+	struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
+	struct usb_ep *ep;
+
+	if (usb_endpoint_xfer_isoc(desc) && usb_endpoint_dir_in(desc)) {
+		list_for_each_entry_reverse(ep, &ci->gadget.ep_list, ep_list) {
+			if (ep->caps.dir_in && !ep->claimed)
+				return ep;
+		}
+	}
+
+	return NULL;
+}
+
 /**
  * Device operations part of the API to the USB controller hardware,
  * which don't involve endpoints (or i/o)
@@ -1635,6 +1654,7 @@ static const struct usb_gadget_ops usb_g
 	.vbus_draw	= ci_udc_vbus_draw,
 	.udc_start	= ci_udc_start,
 	.udc_stop	= ci_udc_stop,
+	.match_ep 	= ci_udc_match_ep,
 };
 
 static int init_eps(struct ci_hdrc *ci)
author maintainer
#59 lore raw

PATCH 59/121 kselftest/cgroup: fix incorrect test_core skip

In reply to Greg Kroah-Hartman

[ Upstream commit f97f3f8839eb9de5843066d80819884f7722c8c5 ]

The test_core will skip the test_cgcore_no_internal_process_constraint_on_threads test case if the 'cpu' controller missing in root's subtree_control. In fact we need to set the 'cpu' in subtree_control, to make the testing meaningful.

./test_core
...
ok 4 # skip test_cgcore_no_internal_process_constraint_on_threads
...

---
 tools/testing/selftests/cgroup/test_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/cgroup/test_core.c +1 -1
index d78f1c5366d3..79053a4f4783 100644
@@ -198,7 +198,7 @@ static int test_cgcore_no_internal_process_constraint_on_threads(const char *roo
 	char *parent = NULL, *child = NULL;
 
 	if (cg_read_strstr(root, "cgroup.controllers", "cpu") ||
-	    cg_read_strstr(root, "cgroup.subtree_control", "cpu")) {
+	    cg_write(root, "cgroup.subtree_control", "+cpu")) {
 		ret = KSFT_SKIP;
 		goto cleanup;
 	}
Signature · 1 line
2.20.1
author maintainer
#61 lore raw

PATCH 61/121 selftests: vm: install test_vmalloc.sh for run_vmtests

In reply to Greg Kroah-Hartman

[ Upstream commit bc2cce3f2ebcae02aa4bb29e3436bf75ee674c32 ]

Add test_vmalloc.sh to TEST_FILES to make sure it gets installed for run_vmtests.

Fixed below error:
./run_vmtests: line 217: ./test_vmalloc.sh: No such file or directory

Tested with: make TARGETS=vm install INSTALL_PATH=$PWD/x

---
 tools/testing/selftests/vm/Makefile | 2 ++
 1 file changed, 2 insertions(+)
tools/testing/selftests/vm/Makefile +2 -0
index e13eb6cc8901..05306c58ff9f 100644
@@ -25,6 +25,8 @@ TEST_GEN_FILES += virtual_address_range
 
 TEST_PROGS := run_vmtests
 
+TEST_FILES := test_vmalloc.sh
+
 KSFT_KHDR_INSTALL := 1
 include ../lib.mk
 
Signature · 1 line
2.20.1
author maintainer
#60 lore raw

PATCH 60/121 userfaultfd: selftest: fix compiler warning

In reply to Greg Kroah-Hartman

[ Upstream commit 98a13a8d253999cf25eb16d901c35fbd2a8455c4 ]

Fixes following compiler warning

userfaultfd.c: In function ‘usage’:
userfaultfd.c:126:2: warning: format not a string literal and no format
arguments [-Wformat-security]
fprintf(stderr, examples);

---
 tools/testing/selftests/vm/userfaultfd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/vm/userfaultfd.c +1 -1
index 5d1db824f73a..b3e6497b080c 100644
@@ -123,7 +123,7 @@ static void usage(void)
 	fprintf(stderr, "Supported <test type>: anon, hugetlb, "
 		"hugetlb_shared, shmem\n\n");
 	fprintf(stderr, "Examples:\n\n");
-	fprintf(stderr, examples);
+	fprintf(stderr, "%s", examples);
 	exit(1);
 }
 
Signature · 1 line
2.20.1
author maintainer
#62 lore raw

PATCH 62/121 nds32: Avoid IEX status being incorrectly modified

In reply to Greg Kroah-Hartman

[ Upstream commit ed32949e0acb73e7bc054bb02e0453d4d561ceda ]

In order for kernel to capture each denormalized output, the UDF trapping enable bit is always raised in $fpcsr. Because underflow case will issue not an underflow exception but also an inexact exception, it causes that the IEX, IEX cumulative exception, flag in $fpcsr to be raised in each denormalized output handling. To make the emulation transparent to the user, the emulator needs to clear the IEX flag in $fpcsr if the result is a denormalized number. However, if the IEX flag has been raised before this floating point emulation, this cleanup may be incorrect. To avoid the IEX flags in $fpcsr be raised in each denormalized output handling, the IEX trap shall be always enabled.

---
 arch/nds32/include/asm/bitfield.h            |  2 +-
 arch/nds32/include/asm/fpu.h                 |  2 +-
 arch/nds32/include/asm/syscalls.h            |  2 +-
 arch/nds32/include/uapi/asm/fp_udfiex_crtl.h | 16 ++++++++++++
 arch/nds32/include/uapi/asm/sigcontext.h     | 24 ++++++++++++------
 arch/nds32/include/uapi/asm/udftrap.h        | 13 ----------
 arch/nds32/include/uapi/asm/unistd.h         |  4 +--
 arch/nds32/kernel/fpu.c                      | 15 +++++------
 arch/nds32/kernel/sys_nds32.c                | 26 +++++++++++---------
 9 files changed, 58 insertions(+), 46 deletions(-)
 create mode 100644 arch/nds32/include/uapi/asm/fp_udfiex_crtl.h
 delete mode 100644 arch/nds32/include/uapi/asm/udftrap.h
arch/nds32/include/asm/bitfield.h +1 -1
index 7414fcbbab4e..03bbb6d27828 100644
@@ -937,7 +937,7 @@
 #define FPCSR_mskDNIT           ( 0x1  << FPCSR_offDNIT )
 #define FPCSR_mskRIT		( 0x1  << FPCSR_offRIT )
 #define FPCSR_mskALL		(FPCSR_mskIVO | FPCSR_mskDBZ | FPCSR_mskOVF | FPCSR_mskUDF | FPCSR_mskIEX)
-#define FPCSR_mskALLE_NO_UDFE	(FPCSR_mskIVOE | FPCSR_mskDBZE | FPCSR_mskOVFE | FPCSR_mskIEXE)
+#define FPCSR_mskALLE_NO_UDF_IEXE (FPCSR_mskIVOE | FPCSR_mskDBZE | FPCSR_mskOVFE)
 #define FPCSR_mskALLE		(FPCSR_mskIVOE | FPCSR_mskDBZE | FPCSR_mskOVFE | FPCSR_mskUDFE | FPCSR_mskIEXE)
 #define FPCSR_mskALLT           (FPCSR_mskIVOT | FPCSR_mskDBZT | FPCSR_mskOVFT | FPCSR_mskUDFT | FPCSR_mskIEXT |FPCSR_mskDNIT | FPCSR_mskRIT)
 
arch/nds32/include/asm/fpu.h +1 -1
index 019f1bcfc5ee..8294ed4aaa2c 100644
@@ -36,7 +36,7 @@ extern int do_fpuemu(struct pt_regs *regs, struct fpu_struct *fpu);
  * enabled by default and kerenl will re-execute it by fpu emulator
  * when getting underflow exception.
  */
-#define FPCSR_INIT  FPCSR_mskUDFE
+#define FPCSR_INIT  (FPCSR_mskUDFE | FPCSR_mskIEXE)
 #else
 #define FPCSR_INIT  0x0UL
 #endif
arch/nds32/include/asm/syscalls.h +1 -1
index da32101b455d..b9c9becce5d6 100644
@@ -7,7 +7,7 @@
 asmlinkage long sys_cacheflush(unsigned long addr, unsigned long len, unsigned int op);
 asmlinkage long sys_fadvise64_64_wrapper(int fd, int advice, loff_t offset, loff_t len);
 asmlinkage long sys_rt_sigreturn_wrapper(void);
-asmlinkage long sys_udftrap(int option);
+asmlinkage long sys_fp_udfiex_crtl(int cmd, int act);
 
 #include <asm-generic/syscalls.h>
 
arch/nds32/include/uapi/asm/fp_udfiex_crtl.h new file +16 -0
new file mode 100644
index 000000000000..d54a5d6c6538
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (C) 2005-2019 Andes Technology Corporation */
+#ifndef	_FP_UDF_IEX_CRTL_H
+#define	_FP_UDF_IEX_CRTL_H
+
+/*
+ * The cmd list of sys_fp_udfiex_crtl()
+ */
+/* Disable UDF or IEX trap based on the content of parameter act */
+#define DISABLE_UDF_IEX_TRAP	0
+/* Enable UDF or IEX trap based on the content of parameter act */
+#define ENABLE_UDF_IEX_TRAP	1
+/* Get current status of UDF and IEX trap */
+#define GET_UDF_IEX_TRAP	2
+
+#endif /* _FP_UDF_IEX_CRTL_H */
arch/nds32/include/uapi/asm/sigcontext.h +17 -7
index 58afc416473e..b53634033e32 100644
@@ -13,14 +13,24 @@ struct fpu_struct {
 	unsigned long long fd_regs[32];
 	unsigned long fpcsr;
 	/*
-	 * UDF_trap is used to recognize whether underflow trap is enabled
-	 * or not. When UDF_trap == 1, this process will be traped and then
-	 * get a SIGFPE signal when encountering an underflow exception.
-	 * UDF_trap is only modified through setfputrap syscall. Therefore,
-	 * UDF_trap needn't be saved or loaded to context in each context
-	 * switch.
+	 * When CONFIG_SUPPORT_DENORMAL_ARITHMETIC is defined, kernel prevents
+	 * hardware from treating the denormalized output as an underflow case
+	 * and rounding it to a normal number. Hence kernel enables the UDF and
+	 * IEX trap in the fpcsr register to step in the calculation.
+	 * However, the UDF and IEX trap enable bit in $fpcsr also lose
+	 * their use.
+	 *
+	 * UDF_IEX_trap replaces the feature of UDF and IEX trap enable bit in
+	 * $fpcsr to control the trap of underflow and inexact. The bit filed
+	 * of UDF_IEX_trap is the same as $fpcsr, 10th bit is used to enable UDF
+	 * exception trapping and 11th bit is used to enable IEX exception
+	 * trapping.
+	 *
+	 * UDF_IEX_trap is only modified through fp_udfiex_crtl syscall.
+	 * Therefore, UDF_IEX_trap needn't be saved and restored in each
+	 * context switch.
 	 */
-	unsigned long UDF_trap;
+	unsigned long UDF_IEX_trap;
 };
 
 struct zol_struct {
arch/nds32/include/uapi/asm/udftrap.h deleted +0 -13
deleted file mode 100644
index 433f79d679c0..000000000000
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Copyright (C) 2005-2018 Andes Technology Corporation */
-#ifndef	_ASM_SETFPUTRAP
-#define	_ASM_SETFPUTRAP
-
-/*
- * Options for setfputrap system call
- */
-#define	DISABLE_UDFTRAP	0	/* disable underflow exception trap */
-#define	ENABLE_UDFTRAP	1	/* enable undeflos exception trap */
-#define	GET_UDFTRAP	2	/* only get undeflos exception trap status */
-
-#endif /* _ASM_CACHECTL */
arch/nds32/include/uapi/asm/unistd.h +2 -2
index 4ec8f543103f..6b9ff90e3ae5 100644
@@ -11,6 +11,6 @@
 
 /* Additional NDS32 specific syscalls. */
 #define __NR_cacheflush		(__NR_arch_specific_syscall)
-#define __NR_udftrap		(__NR_arch_specific_syscall + 1)
+#define __NR_fp_udfiex_crtl	(__NR_arch_specific_syscall + 1)
 __SYSCALL(__NR_cacheflush, sys_cacheflush)
-__SYSCALL(__NR_udftrap, sys_udftrap)
+__SYSCALL(__NR_fp_udfiex_crtl, sys_fp_udfiex_crtl)
arch/nds32/kernel/fpu.c +6 -9
index fddd40c7a16f..cf0b8760f261 100644
@@ -14,7 +14,7 @@ const struct fpu_struct init_fpuregs = {
 	.fd_regs = {[0 ... 31] = sNAN64},
 	.fpcsr = FPCSR_INIT,
 #if IS_ENABLED(CONFIG_SUPPORT_DENORMAL_ARITHMETIC)
-	.UDF_trap = 0
+	.UDF_IEX_trap = 0
 #endif
 };
 
@@ -178,7 +178,7 @@ inline void do_fpu_context_switch(struct pt_regs *regs)
 		/* First time FPU user.  */
 		load_fpu(&init_fpuregs);
 #if IS_ENABLED(CONFIG_SUPPORT_DENORMAL_ARITHMETIC)
-		current->thread.fpu.UDF_trap = init_fpuregs.UDF_trap;
+		current->thread.fpu.UDF_IEX_trap = init_fpuregs.UDF_IEX_trap;
 #endif
 		set_used_math();
 	}
@@ -206,7 +206,7 @@ inline void handle_fpu_exception(struct pt_regs *regs)
 	unsigned int fpcsr;
 	int si_code = 0, si_signo = SIGFPE;
 #if IS_ENABLED(CONFIG_SUPPORT_DENORMAL_ARITHMETIC)
-	unsigned long redo_except = FPCSR_mskDNIT|FPCSR_mskUDFT;
+	unsigned long redo_except = FPCSR_mskDNIT|FPCSR_mskUDFT|FPCSR_mskIEXT;
 #else
 	unsigned long redo_except = FPCSR_mskDNIT;
 #endif
@@ -215,21 +215,18 @@ inline void handle_fpu_exception(struct pt_regs *regs)
 	fpcsr = current->thread.fpu.fpcsr;
 
 	if (fpcsr & redo_except) {
-#if IS_ENABLED(CONFIG_SUPPORT_DENORMAL_ARITHMETIC)
-		if (fpcsr & FPCSR_mskUDFT)
-			current->thread.fpu.fpcsr &= ~FPCSR_mskIEX;
-#endif
 		si_signo = do_fpuemu(regs, &current->thread.fpu);
 		fpcsr = current->thread.fpu.fpcsr;
-		if (!si_signo)
+		if (!si_signo) {
+			current->thread.fpu.fpcsr &= ~(redo_except);
 			goto done;
+		}
 	} else if (fpcsr & FPCSR_mskRIT) {
 		if (!user_mode(regs))
 			do_exit(SIGILL);
 		si_signo = SIGILL;
 	}
 
-
 	switch (si_signo) {
 	case SIGFPE:
 		fill_sigfpe_signo(fpcsr, &si_code);
arch/nds32/kernel/sys_nds32.c +14 -12
index 0835277636ce..cb2d1e219bb3 100644
@@ -6,8 +6,8 @@
 
 #include <asm/cachectl.h>
 #include <asm/proc-fns.h>
-#include <asm/udftrap.h>
 #include <asm/fpu.h>
+#include <asm/fp_udfiex_crtl.h>
 
 SYSCALL_DEFINE6(mmap2, unsigned long, addr, unsigned long, len,
 	       unsigned long, prot, unsigned long, flags,
@@ -51,31 +51,33 @@ SYSCALL_DEFINE3(cacheflush, unsigned int, start, unsigned int, end, int, cache)
 	return 0;
 }
 
-SYSCALL_DEFINE1(udftrap, int, option)
+SYSCALL_DEFINE2(fp_udfiex_crtl, unsigned int, cmd, unsigned int, act)
 {
 #if IS_ENABLED(CONFIG_SUPPORT_DENORMAL_ARITHMETIC)
-	int old_udftrap;
+	int old_udf_iex;
 
 	if (!used_math()) {
 		load_fpu(&init_fpuregs);
-		current->thread.fpu.UDF_trap = init_fpuregs.UDF_trap;
+		current->thread.fpu.UDF_IEX_trap = init_fpuregs.UDF_IEX_trap;
 		set_used_math();
 	}
 
-	old_udftrap = current->thread.fpu.UDF_trap;
-	switch (option) {
-	case DISABLE_UDFTRAP:
-		current->thread.fpu.UDF_trap = 0;
+	old_udf_iex = current->thread.fpu.UDF_IEX_trap;
+	act &= (FPCSR_mskUDFE | FPCSR_mskIEXE);
+
+	switch (cmd) {
+	case DISABLE_UDF_IEX_TRAP:
+		current->thread.fpu.UDF_IEX_trap &= ~act;
 		break;
-	case ENABLE_UDFTRAP:
-		current->thread.fpu.UDF_trap = FPCSR_mskUDFE;
+	case ENABLE_UDF_IEX_TRAP:
+		current->thread.fpu.UDF_IEX_trap |= act;
 		break;
-	case GET_UDFTRAP:
+	case GET_UDF_IEX_TRAP:
 		break;
 	default:
 		return -EINVAL;
 	}
-	return old_udftrap;
+	return old_udf_iex;
 #else
 	return -ENOTSUPP;
 #endif
Signature · 1 line
2.20.1
author maintainer
#63 lore raw

PATCH 63/121 net: dsa: mv88e6xxx: avoid error message on remove from VLAN 0

In reply to Greg Kroah-Hartman

[ Upstream commit 62394708f3e01c9f2be6be74eb6305bae1ed924f ]

When non-bridged, non-vlan'ed mv88e6xxx port is moving down, error message is logged:

failed to kill vid 0081/0 for device eth_cu_1000_4

This is caused by call from __vlan_vid_del() with vin set to zero, over call chain this results into _mv88e6xxx_port_vlan_del() called with vid=0, and mv88e6xxx_vtu_get() called from there returns -EINVAL.

On symmetric path moving port up, call goes through mv88e6xxx_port_vlan_prepare() that calls mv88e6xxx_port_check_hw_vlan() that returns -EOPNOTSUPP for zero vid.

This patch changes mv88e6xxx_vtu_get() to also return -EOPNOTSUPP for zero vid, then this error code is explicitly cleared in dsa_slave_vlan_rx_kill_vid() and error message is no longer logged.

---
 drivers/net/dsa/mv88e6xxx/chip.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/dsa/mv88e6xxx/chip.c +1 -1
index 720f1dde2c2d..ae750ab9a4d7 100644
@@ -1517,7 +1517,7 @@ static int mv88e6xxx_vtu_get(struct mv88e6xxx_chip *chip, u16 vid,
 	int err;
 
 	if (!vid)
-		return -EINVAL;
+		return -EOPNOTSUPP;
 
 	entry->vid = vid - 1;
 	entry->valid = false;
Signature · 1 line
2.20.1
author maintainer
#64 lore raw

PATCH 64/121 net: hns: Fix loopback test failed at copper ports

In reply to Greg Kroah-Hartman

[ Upstream commit 2e1f164861e500f4e068a9d909bbd3fcc7841483 ]

When doing a loopback test at copper ports, the serdes loopback and the phy loopback will fail, because of the adjust link had not finished, and phy not ready.

Adds sleep between adjust link and test process to fix it.

---
 drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c +4 -0
index ce15d2350db9..188c3f6791b5 100644
@@ -339,6 +339,7 @@ static int __lb_setup(struct net_device *ndev,
 static int __lb_up(struct net_device *ndev,
 		   enum hnae_loop loop_mode)
 {
+#define NIC_LB_TEST_WAIT_PHY_LINK_TIME 300
 	struct hns_nic_priv *priv = netdev_priv(ndev);
 	struct hnae_handle *h = priv->ae_handle;
 	int speed, duplex;
@@ -365,6 +366,9 @@ static int __lb_up(struct net_device *ndev,
 
 	h->dev->ops->adjust_link(h, speed, duplex);
 
+	/* wait adjust link done and phy ready */
+	msleep(NIC_LB_TEST_WAIT_PHY_LINK_TIME);
+
 	return 0;
 }
 
Signature · 1 line
2.20.1
author maintainer
#58 lore raw

PATCH 58/121 kselftest/cgroup: fix unexpected testing failure on test_core

In reply to Greg Kroah-Hartman

[ Upstream commit 00e38a5d753d7788852f81703db804a60a84c26e ]

The cgroup testing relys on the root cgroup's subtree_control setting, If the 'memory' controller isn't set, some test cases will be failed as following:

$sudo ./test_core
not ok 1 test_cgcore_internal_process_constraint
ok 2 test_cgcore_top_down_constraint_enable
not ok 3 test_cgcore_top_down_constraint_disable
...

To correct this unexpected failure, this patch write the 'memory' to subtree_control of root to get a right result.

---
 tools/testing/selftests/cgroup/test_core.c | 5 +++++
 1 file changed, 5 insertions(+)
tools/testing/selftests/cgroup/test_core.c +5 -0
index be59f9c34ea2..d78f1c5366d3 100644
@@ -376,6 +376,11 @@ int main(int argc, char *argv[])
 
 	if (cg_find_unified_root(root, sizeof(root)))
 		ksft_exit_skip("cgroup v2 isn't mounted\n");
+
+	if (cg_read_strstr(root, "cgroup.subtree_control", "memory"))
+		if (cg_write(root, "cgroup.subtree_control", "+memory"))
+			ksft_exit_skip("Failed to set memory controller\n");
+
 	for (i = 0; i < ARRAY_SIZE(tests); i++) {
 		switch (tests[i].fn(root)) {
 		case KSFT_PASS:
Signature · 1 line
2.20.1
author maintainer
#35 lore raw

PATCH 35/121 dmaengine: mediatek-cqdma: sleeping in atomic context

In reply to Greg Kroah-Hartman

[ Upstream commit 069b3c4214f27b130d0642f32438560db30f452e ]

The mtk_cqdma_poll_engine_done() function takes a true/false parameter where true means it's called from atomic context. There are a couple places where it was set to false but it's actually in atomic context so it should be true.

All the callers for mtk_cqdma_hard_reset() are holding a spin_lock and in mtk_cqdma_free_chan_resources() we take a spin_lock before calling the mtk_cqdma_poll_engine_done() function.

Fixes b1f01e48df5a ("dmaengine: mediatek: Add MediaTek Command-Queue DMA controller for MT6765 SoC")
---
 drivers/dma/mediatek/mtk-cqdma.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/dma/mediatek/mtk-cqdma.c +2 -2
index 814853842e29..723b11c190b3 100644
@@ -225,7 +225,7 @@ static int mtk_cqdma_hard_reset(struct mtk_cqdma_pchan *pc)
 	mtk_dma_set(pc, MTK_CQDMA_RESET, MTK_CQDMA_HARD_RST_BIT);
 	mtk_dma_clr(pc, MTK_CQDMA_RESET, MTK_CQDMA_HARD_RST_BIT);
 
-	return mtk_cqdma_poll_engine_done(pc, false);
+	return mtk_cqdma_poll_engine_done(pc, true);
 }
 
 static void mtk_cqdma_start(struct mtk_cqdma_pchan *pc,
@@ -671,7 +671,7 @@ static void mtk_cqdma_free_chan_resources(struct dma_chan *c)
 		mtk_dma_set(cvc->pc, MTK_CQDMA_FLUSH, MTK_CQDMA_FLUSH_BIT);
 
 		/* wait for the completion of flush operation */
-		if (mtk_cqdma_poll_engine_done(cvc->pc, false) < 0)
+		if (mtk_cqdma_poll_engine_done(cvc->pc, true) < 0)
 			dev_err(cqdma2dev(to_cqdma_dev(c)), "cqdma flush timeout\n");
 
 		/* clear the flush bit and interrupt flag */
Signature · 1 line
2.20.1
author maintainer
#66 lore raw

PATCH 66/121 sparc: perf: fix updated event period in response to PERF_EVENT_IOC_PERIOD

In reply to Greg Kroah-Hartman

[ Upstream commit 56cd0aefa475079e9613085b14a0f05037518fed ]

The PERF_EVENT_IOC_PERIOD ioctl command can be used to change the sample period of a running perf_event. Consequently, when calculating the next event period, the new period will only be considered after the previous one has overflowed.

This patch changes the calculation of the remaining event ticks so that they are offset if the period has changed.

See commit 3581fe0ef37c ("ARM: 7556/1: perf: fix updated event period in response to PERF_EVENT_IOC_PERIOD") for details.

---
 arch/sparc/kernel/perf_event.c | 4 ++++
 1 file changed, 4 insertions(+)
arch/sparc/kernel/perf_event.c +4 -0
index 6de7c684c29f..a58ae9c42803 100644
@@ -891,6 +891,10 @@ static int sparc_perf_event_set_period(struct perf_event *event,
 	s64 period = hwc->sample_period;
 	int ret = 0;
 
+	/* The period may have been changed by PERF_EVENT_IOC_PERIOD */
+	if (unlikely(period != hwc->last_period))
+		left = period - (hwc->last_period - left);
+
 	if (unlikely(left <= -period)) {
 		left = period;
 		local64_set(&hwc->period_left, left);
Signature · 1 line
2.20.1
author maintainer
#68 lore raw

PATCH 68/121 net: ethernet: mediatek: Use NET_IP_ALIGN to judge if HW RX_2BYTE_OFFSET is enabled

In reply to Greg Kroah-Hartman

[ Upstream commit 880c2d4b2fdfd580ebcd6bb7240a8027a1d34751 ]

Should only enable HW RX_2BYTE_OFFSET function in the case NET_IP_ALIGN equals to 2.

---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/ethernet/mediatek/mtk_eth_soc.c +2 -1
index 59601cb5aeee..f3f7551162a9 100644
@@ -1777,6 +1777,7 @@ static void mtk_poll_controller(struct net_device *dev)
 
 static int mtk_start_dma(struct mtk_eth *eth)
 {
+	u32 rx_2b_offset = (NET_IP_ALIGN == 2) ? MTK_RX_2B_OFFSET : 0;
 	int err;
 
 	err = mtk_dma_init(eth);
@@ -1793,7 +1794,7 @@ static int mtk_start_dma(struct mtk_eth *eth)
 		MTK_QDMA_GLO_CFG);
 
 	mtk_w32(eth,
-		MTK_RX_DMA_EN | MTK_RX_2B_OFFSET |
+		MTK_RX_DMA_EN | rx_2b_offset |
 		MTK_RX_BT_32DWORDS | MTK_MULTI_EN,
 		MTK_PDMA_GLO_CFG);
 
Signature · 1 line
2.20.1
author maintainer
#69 lore raw

PATCH 69/121 selftests: set sysctl bc_forwarding properly in router_broadcast.sh

In reply to Greg Kroah-Hartman

[ Upstream commit 67c0aaa1eaec60e9dab301012bdebe6726ae04bd ]

sysctl setting bc_forwarding for $rp2 is needed when ping_test_from h2, otherwise the bc packets from $rp2 won't be forwarded. This patch is to add this setting for $rp2.

Also, as ping_test_from does grep "$from" only, which could match some unexpected output, some test case doesn't really work, like:

  # ping_test_from $h2 198.51.200.255 198.51.200.2
    PING 198.51.200.255 from 198.51.100.2 veth3: 56(84) bytes of data.
    64 bytes from 198.51.100.1: icmp_seq=1 ttl=64 time=0.336 ms

When doing grep $form (198.51.200.2), the output could still match. So change to grep "bytes from $from" instead.

Fixes 40f98b9af943 ("selftests: add a selftest for directed broadcast forwarding")
---
 tools/testing/selftests/net/forwarding/router_broadcast.sh | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/router_broadcast.sh +4 -1
index 9a678ece32b4..4eac0a06f451 100755
@@ -145,16 +145,19 @@ bc_forwarding_disable()
 {
 	sysctl_set net.ipv4.conf.all.bc_forwarding 0
 	sysctl_set net.ipv4.conf.$rp1.bc_forwarding 0
+	sysctl_set net.ipv4.conf.$rp2.bc_forwarding 0
 }
 
 bc_forwarding_enable()
 {
 	sysctl_set net.ipv4.conf.all.bc_forwarding 1
 	sysctl_set net.ipv4.conf.$rp1.bc_forwarding 1
+	sysctl_set net.ipv4.conf.$rp2.bc_forwarding 1
 }
 
 bc_forwarding_restore()
 {
+	sysctl_restore net.ipv4.conf.$rp2.bc_forwarding
 	sysctl_restore net.ipv4.conf.$rp1.bc_forwarding
 	sysctl_restore net.ipv4.conf.all.bc_forwarding
 }
@@ -171,7 +174,7 @@ ping_test_from()
 	log_info "ping $dip, expected reply from $from"
 	ip vrf exec $(master_name_get $oif) \
 		$PING -I $oif $dip -c 10 -i 0.1 -w $PING_TIMEOUT -b 2>&1 \
-		| grep $from &> /dev/null
+		| grep "bytes from $from" > /dev/null
 	check_err_fail $fail $?
 }
 
Signature · 1 line
2.20.1
author maintainer
#36 lore raw

PATCH 36/121 dmaengine: sprd: Fix the possible crash when getting descriptor status

In reply to Greg Kroah-Hartman

[ Upstream commit 16d0f85e45b99411ac10cb12cdd9279204a72381 ]

We will get a NULL virtual descriptor by vchan_find_desc() when the descriptor has been submitted, that will crash the kernel when getting the descriptor status.

In this case, since the descriptor has been submitted to process, but it is not completed now, which means the descriptor is listed into the 'vc->desc_submitted' list now. So we can not get current processing descriptor by vchan_find_desc(), but the pointer 'schan->cur_desc' will point to the current processing descriptor, then we can use 'schan->cur_desc' to get current processing descriptor's status to avoid this issue.

---
 drivers/dma/sprd-dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/dma/sprd-dma.c +1 -1
index 48431e2da987..e29342ab85f6 100644
@@ -625,7 +625,7 @@ static enum dma_status sprd_dma_tx_status(struct dma_chan *chan,
 		else
 			pos = 0;
 	} else if (schan->cur_desc && schan->cur_desc->vd.tx.cookie == cookie) {
-		struct sprd_dma_desc *sdesc = to_sprd_dma_desc(vd);
+		struct sprd_dma_desc *sdesc = schan->cur_desc;
 
 		if (sdesc->dir == DMA_DEV_TO_MEM)
 			pos = sprd_dma_get_dst_addr(schan);
Signature · 1 line
2.20.1
author maintainer
#38 lore raw

PATCH 38/121 dmaengine: sprd: Fix the incorrect start for 2-stage destination channels

In reply to Greg Kroah-Hartman

[ Upstream commit 3d626a97f0303e9c30d063434b749de3f0f91fb5 ]

The 2-stage destination channel will be triggered by source channel automatically, which means we should not trigger it by software request.

---
 drivers/dma/sprd-dma.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/dma/sprd-dma.c +3 -1
index 431e289d59a5..0f92e60529d1 100644
@@ -510,7 +510,9 @@ static void sprd_dma_start(struct sprd_dma_chn *schan)
 	sprd_dma_set_uid(schan);
 	sprd_dma_enable_chn(schan);
 
-	if (schan->dev_id == SPRD_DMA_SOFTWARE_UID)
+	if (schan->dev_id == SPRD_DMA_SOFTWARE_UID &&
+	    schan->chn_mode != SPRD_DMA_DST_CHN0 &&
+	    schan->chn_mode != SPRD_DMA_DST_CHN1)
 		sprd_dma_soft_request(schan);
 }
 
Signature · 1 line
2.20.1
author maintainer
#40 lore raw

PATCH 40/121 dmaengine: sprd: Fix the right place to configure 2-stage transfer

In reply to Greg Kroah-Hartman

[ Upstream commit c434e377dad1dec05cad1870ce21bc539e1e024f ]

Move the 2-stage configuration before configuring the link-list mode, since we will use some 2-stage configuration to fill the link-list configuration.

---
 drivers/dma/sprd-dma.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/dma/sprd-dma.c +6 -6
index a01c23246632..01abed5cde49 100644
@@ -911,6 +911,12 @@ sprd_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 		schan->linklist.virt_addr = 0;
 	}
 
+	/* Set channel mode and trigger mode for 2-stage transfer */
+	schan->chn_mode =
+		(flags >> SPRD_DMA_CHN_MODE_SHIFT) & SPRD_DMA_CHN_MODE_MASK;
+	schan->trg_mode =
+		(flags >> SPRD_DMA_TRG_MODE_SHIFT) & SPRD_DMA_TRG_MODE_MASK;
+
 	sdesc = kzalloc(sizeof(*sdesc), GFP_NOWAIT);
 	if (!sdesc)
 		return NULL;
@@ -944,12 +950,6 @@ sprd_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 		}
 	}
 
-	/* Set channel mode and trigger mode for 2-stage transfer */
-	schan->chn_mode =
-		(flags >> SPRD_DMA_CHN_MODE_SHIFT) & SPRD_DMA_CHN_MODE_MASK;
-	schan->trg_mode =
-		(flags >> SPRD_DMA_TRG_MODE_SHIFT) & SPRD_DMA_TRG_MODE_MASK;
-
 	ret = sprd_dma_fill_desc(chan, &sdesc->chn_hw, 0, 0, src, dst, len,
 				 dir, flags, slave_cfg);
 	if (ret) {
Signature · 1 line
2.20.1
author maintainer
#41 lore raw

PATCH 41/121 ARC: [plat-hsdk]: Add missing multicast filter bins number to GMAC node

In reply to Greg Kroah-Hartman

[ Upstream commit ecc906a11c2a0940e1a380debd8bd5bc09faf454 ]

GMAC controller on HSDK boards supports 256 Hash Table size so we need to add the multicast filter bins property. This allows for the Hash filter to work properly using stmmac driver.

---
 arch/arc/boot/dts/hsdk.dts | 1 +
 1 file changed, 1 insertion(+)
arch/arc/boot/dts/hsdk.dts +1 -0
index 7425bb0f2d1b..699f372b2a6f 100644
@@ -187,6 +187,7 @@
 			interrupt-names = "macirq";
 			phy-mode = "rgmii";
 			snps,pbl = <32>;
+			snps,multicast-filter-bins = <256>;
 			clocks = <&gmacclk>;
 			clock-names = "stmmaceth";
 			phy-handle = <&phy0>;
Signature · 1 line
2.20.1
author maintainer
#32 lore raw

PATCH 32/121 ARC: fix build warnings

In reply to Greg Kroah-Hartman

[ Upstream commit 89c92142f75eb80064f5b9f1111484b1b4d81790 ]

| arch/arc/mm/tlb.c:914:2: warning: variable length array 'pd0' is used [-Wvla] | arch/arc/include/asm/cmpxchg.h:95:29: warning: value computed is not used [-Wunused-value]

---
 arch/arc/include/asm/cmpxchg.h | 14 ++++++++++----
 arch/arc/mm/tlb.c              | 13 ++++++++-----
 2 files changed, 18 insertions(+), 9 deletions(-)
arch/arc/include/asm/cmpxchg.h +10 -4
index d819de1c5d10..3ea4112c8302 100644
@@ -92,8 +92,11 @@ __cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
 
 #endif /* CONFIG_ARC_HAS_LLSC */
 
-#define cmpxchg(ptr, o, n) ((typeof(*(ptr)))__cmpxchg((ptr), \
-				(unsigned long)(o), (unsigned long)(n)))
+#define cmpxchg(ptr, o, n) ({				\
+	(typeof(*(ptr)))__cmpxchg((ptr),		\
+				  (unsigned long)(o),	\
+				  (unsigned long)(n));	\
+})
 
 /*
  * atomic_cmpxchg is same as cmpxchg
@@ -198,8 +201,11 @@ static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
 	return __xchg_bad_pointer();
 }
 
-#define xchg(ptr, with) ((typeof(*(ptr)))__xchg((unsigned long)(with), (ptr), \
-						 sizeof(*(ptr))))
+#define xchg(ptr, with) ({				\
+	(typeof(*(ptr)))__xchg((unsigned long)(with),	\
+			       (ptr),			\
+			       sizeof(*(ptr)));		\
+})
 
 #endif /* CONFIG_ARC_PLAT_EZNPS */
 
arch/arc/mm/tlb.c +8 -5
index 4097764fea23..fa18c00b0cfd 100644
@@ -911,9 +911,11 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
 			  struct pt_regs *regs)
 {
 	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
-	unsigned int pd0[mmu->ways];
 	unsigned long flags;
-	int set;
+	int set, n_ways = mmu->ways;
+
+	n_ways = min(n_ways, 4);
+	BUG_ON(mmu->ways > 4);
 
 	local_irq_save(flags);
 
@@ -921,9 +923,10 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
 	for (set = 0; set < mmu->sets; set++) {
 
 		int is_valid, way;
+		unsigned int pd0[4];
 
 		/* read out all the ways of current set */
-		for (way = 0, is_valid = 0; way < mmu->ways; way++) {
+		for (way = 0, is_valid = 0; way < n_ways; way++) {
 			write_aux_reg(ARC_REG_TLBINDEX,
 					  SET_WAY_TO_IDX(mmu, set, way));
 			write_aux_reg(ARC_REG_TLBCOMMAND, TLBRead);
@@ -937,14 +940,14 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
 			continue;
 
 		/* Scan the set for duplicate ways: needs a nested loop */
-		for (way = 0; way < mmu->ways - 1; way++) {
+		for (way = 0; way < n_ways - 1; way++) {
 
 			int n;
 
 			if (!pd0[way])
 				continue;
 
-			for (n = way + 1; n < mmu->ways; n++) {
+			for (n = way + 1; n < n_ways; n++) {
 				if (pd0[way] != pd0[n])
 					continue;
 
Signature · 1 line
2.20.1
author maintainer
#71 lore raw

PATCH 71/121 drm/arm/hdlcd: Actually validate CRTC modes

In reply to Greg Kroah-Hartman

[ Upstream commit b96151edced4edb6a18aa89a5fa02c7066efff45 ]

Rather than allowing any old mode through, then subsequently refusing unmatchable clock rates in atomic_check when it's too late to back out and pick a different mode, let's do that validation up-front where it will cause unsupported modes to be correctly pruned in the first place.

This also eliminates an issue whereby a perceived clock rate of 0 would cause atomic disable to fail and prevent the module from being unloaded.

---
 drivers/gpu/drm/arm/hdlcd_crtc.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/gpu/drm/arm/hdlcd_crtc.c +5 -6
index 0b2b62f8fa3c..ecac6fe0b213 100644
@@ -186,20 +186,19 @@ static void hdlcd_crtc_atomic_disable(struct drm_crtc *crtc,
 	clk_disable_unprepare(hdlcd->clk);
 }
 
-static int hdlcd_crtc_atomic_check(struct drm_crtc *crtc,
-				   struct drm_crtc_state *state)
+static enum drm_mode_status hdlcd_crtc_mode_valid(struct drm_crtc *crtc,
+		const struct drm_display_mode *mode)
 {
 	struct hdlcd_drm_private *hdlcd = crtc_to_hdlcd_priv(crtc);
-	struct drm_display_mode *mode = &state->adjusted_mode;
 	long rate, clk_rate = mode->clock * 1000;
 
 	rate = clk_round_rate(hdlcd->clk, clk_rate);
 	if (rate != clk_rate) {
 		/* clock required by mode not supported by hardware */
-		return -EINVAL;
+		return MODE_NOCLOCK;
 	}
 
-	return 0;
+	return MODE_OK;
 }
 
 static void hdlcd_crtc_atomic_begin(struct drm_crtc *crtc,
@@ -220,7 +219,7 @@ static void hdlcd_crtc_atomic_begin(struct drm_crtc *crtc,
 }
 
 static const struct drm_crtc_helper_funcs hdlcd_crtc_helper_funcs = {
-	.atomic_check	= hdlcd_crtc_atomic_check,
+	.mode_valid	= hdlcd_crtc_mode_valid,
 	.atomic_begin	= hdlcd_crtc_atomic_begin,
 	.atomic_enable	= hdlcd_crtc_atomic_enable,
 	.atomic_disable	= hdlcd_crtc_atomic_disable,
Signature · 1 line
2.20.1
author maintainer
#82 lore raw

PATCH 82/121 s390/qeth: handle limited IPv4 broadcast in L3 TX path

In reply to Greg Kroah-Hartman

[ Upstream commit 72c87976c5abbf8a834ad85f10d03c0cd58b985c ]

When selecting the cast type of a neighbourless IPv4 skb (eg. on a raw socket), qeth_l3 falls back to the packet's destination IP address. For this case we should classify traffic sent to 255.255.255.255 as broadcast.
This fixes DHCP requests, which were misclassified as unicast (and for IQD interfaces thus ended up on the wrong HW queue).

---
 drivers/s390/net/qeth_l3_main.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/s390/net/qeth_l3_main.c +2 -0
index 53712cf26406..cb641fd303d3 100644
@@ -1906,6 +1906,8 @@ static int qeth_l3_get_cast_type(struct sk_buff *skb)
 	/* no neighbour (eg AF_PACKET), fall back to target's IP address ... */
 	switch (qeth_get_ip_version(skb)) {
 	case 4:
+		if (ipv4_is_lbcast(ip_hdr(skb)->daddr))
+			return RTN_BROADCAST;
 		return ipv4_is_multicast(ip_hdr(skb)->daddr) ?
 				RTN_MULTICAST : RTN_UNICAST;
 	case 6:
Signature · 1 line
2.20.1
author maintainer
#81 lore raw

PATCH 81/121 tests: fix pidfd-test compilation

In reply to Greg Kroah-Hartman

[ Upstream commit 1fcd0eb356ad56c4e405f06e31dd9fde2109d5ab ]

Define __NR_pidfd_send_signal if it isn't to prevent a potential compilation error.

To make pidfd-test compile on all arches, irrespective of whether or not syscall numbers are assigned, define the syscall number to -1. If it isn't defined this will cause the kernel to return -ENOSYS.

Fixes 575a0ae9744d ("selftests: add tests for pidfd_send_signal()")
---
 tools/testing/selftests/pidfd/pidfd_test.c | 4 ++++
 1 file changed, 4 insertions(+)
tools/testing/selftests/pidfd/pidfd_test.c +4 -0
index d59378a93782..20323f55613a 100644
@@ -16,6 +16,10 @@
 
 #include "../kselftest.h"
 
+#ifndef __NR_pidfd_send_signal
+#define __NR_pidfd_send_signal -1
+#endif
+
 static inline int sys_pidfd_send_signal(int pidfd, int sig, siginfo_t *info,
 					unsigned int flags)
 {
Signature · 1 line
2.20.1
author maintainer
#84 lore raw

PATCH 84/121 s390/qeth: fix VLAN attribute in bridge_hostnotify udev event

In reply to Greg Kroah-Hartman

[ Upstream commit 335726195e460cb6b3f795b695bfd31f0ea70ef0 ]

Enabling sysfs attribute bridge_hostnotify triggers a series of udev events for the MAC addresses of all currently connected peers. In case no VLAN is set for a peer, the device reports the corresponding MAC addresses with VLAN ID 4096. This currently results in attribute VLAN=4096 for all non-VLAN interfaces in the initial series of events after host-notify is enabled.

Instead, no VLAN attribute should be reported in the udev event for non-VLAN interfaces.

Only the initial events face this issue. For dynamic changes that are reported later, the device uses a validity flag.

This also changes the code so that it now sets the VLAN attribute for MAC addresses with VID 0. On Linux, no qeth interface will ever be registered with VID 0: Linux kernel registers VID 0 on all network interfaces initially, but qeth will drop .ndo_vlan_rx_add_vid for VID 0. Peers with other OSs could register MACs with VID 0.

Fixes 9f48b9db9a22 ("qeth: bridgeport support - address notifications")
---
 drivers/s390/net/qeth_l2_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/s390/net/qeth_l2_main.c +1 -1
index c3067fd3bd9e..fece768efcb1 100644
@@ -1679,7 +1679,7 @@ static void qeth_bridgeport_an_set_cb(void *priv,
 
 	l2entry = (struct qdio_brinfo_entry_l2 *)entry;
 	code = IPA_ADDR_CHANGE_CODE_MACADDR;
-	if (l2entry->addr_lnid.lnid)
+	if (l2entry->addr_lnid.lnid < VLAN_N_VID)
 		code |= IPA_ADDR_CHANGE_CODE_VLANID;
 	qeth_bridge_emit_host_event(card, anev_reg_unreg, code,
 		(struct net_if_token *)&l2entry->nit,
Signature · 1 line
2.20.1
author maintainer
#83 lore raw

PATCH 83/121 s390/qeth: check dst entry before use

In reply to Greg Kroah-Hartman

[ Upstream commit 0cd6783d3c7d40be165d1f3c811cedf0e3dfcdf1 ]

While qeth_l3 uses netif_keep_dst() to hold onto the dst, a skb's dst may still have been obsoleted (via dst_dev_put()) by the time that we end up using it. The dst then points to the loopback interface, which means the neighbour lookup in qeth_l3_get_cast_type() determines a bogus cast type of RTN_BROADCAST.
For IQD interfaces this causes us to place such skbs on the wrong HW queue, resulting in TX errors.

Fix-up the various call sites to first validate the dst entry with dst_check(), and fall back accordingly.

---
 drivers/s390/net/qeth_l3_main.c | 30 +++++++++++++++++++++++++-----
 1 file changed, 25 insertions(+), 5 deletions(-)
drivers/s390/net/qeth_l3_main.c +25 -5
index cb641fd303d3..93a5748036de 100644
@@ -1883,13 +1883,20 @@ static int qeth_l3_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 
 static int qeth_l3_get_cast_type(struct sk_buff *skb)
 {
+	int ipv = qeth_get_ip_version(skb);
 	struct neighbour *n = NULL;
 	struct dst_entry *dst;
 
 	rcu_read_lock();
 	dst = skb_dst(skb);
-	if (dst)
-		n = dst_neigh_lookup_skb(dst, skb);
+	if (dst) {
+		struct rt6_info *rt = (struct rt6_info *) dst;
+
+		dst = dst_check(dst, (ipv == 6) ? rt6_get_cookie(rt) : 0);
+		if (dst)
+			n = dst_neigh_lookup_skb(dst, skb);
+	}
+
 	if (n) {
 		int cast_type = n->type;
 
@@ -1904,7 +1911,7 @@ static int qeth_l3_get_cast_type(struct sk_buff *skb)
 	rcu_read_unlock();
 
 	/* no neighbour (eg AF_PACKET), fall back to target's IP address ... */
-	switch (qeth_get_ip_version(skb)) {
+	switch (ipv) {
 	case 4:
 		if (ipv4_is_lbcast(ip_hdr(skb)->daddr))
 			return RTN_BROADCAST;
@@ -1943,6 +1950,7 @@ static void qeth_l3_fill_header(struct qeth_qdio_out_q *queue,
 	struct qeth_hdr_layer3 *l3_hdr = &hdr->hdr.l3;
 	struct vlan_ethhdr *veth = vlan_eth_hdr(skb);
 	struct qeth_card *card = queue->card;
+	struct dst_entry *dst;
 
 	hdr->hdr.l3.length = data_len;
 
@@ -1993,15 +2001,27 @@ static void qeth_l3_fill_header(struct qeth_qdio_out_q *queue,
 
 	hdr->hdr.l3.flags = qeth_l3_cast_type_to_flag(cast_type);
 	rcu_read_lock();
+	dst = skb_dst(skb);
+
 	if (ipv == 4) {
-		struct rtable *rt = skb_rtable(skb);
+		struct rtable *rt;
+
+		if (dst)
+			dst = dst_check(dst, 0);
+		rt = (struct rtable *) dst;
 
 		*((__be32 *) &hdr->hdr.l3.next_hop.ipv4.addr) = (rt) ?
 				rt_nexthop(rt, ip_hdr(skb)->daddr) :
 				ip_hdr(skb)->daddr;
 	} else {
 		/* IPv6 */
-		const struct rt6_info *rt = skb_rt6_info(skb);
+		struct rt6_info *rt;
+
+		if (dst) {
+			rt = (struct rt6_info *) dst;
+			dst = dst_check(dst, rt6_get_cookie(rt));
+		}
+		rt = (struct rt6_info *) dst;
 
 		if (rt && !ipv6_addr_any(&rt->rt6i_gateway))
 			l3_hdr->next_hop.ipv6_addr = rt->rt6i_gateway;
Signature · 1 line
2.20.1
author maintainer
#86 lore raw

PATCH 86/121 hwmon: (pmbus/core) Treat parameters as paged if on multiple pages

In reply to Greg Kroah-Hartman

[ Upstream commit 4a60570dce658e3f8885bbcf852430b99f65aca5 ]

Some chips have attributes which exist on more than one page but the attribute is not presently marked as paged. This causes the attributes to be generated with the same label, which makes it impossible for userspace to tell them apart.

Marking all such attributes as paged would result in the page suffix being added regardless of whether they were present on more than one page or not, which might break existing setups. Therefore, we add a second check which treats the attribute as paged, even if not marked as such, if it is present on multiple pages.

Fixes b4ce237b7f7d ("hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers")
---
 drivers/hwmon/pmbus/pmbus_core.c | 34 ++++++++++++++++++++++++++++----
 1 file changed, 30 insertions(+), 4 deletions(-)
drivers/hwmon/pmbus/pmbus_core.c +30 -4
index 2e2b5851139c..cd24b375df1e 100644
@@ -1230,7 +1230,8 @@ static int pmbus_add_sensor_attrs_one(struct i2c_client *client,
 				      const struct pmbus_driver_info *info,
 				      const char *name,
 				      int index, int page,
-				      const struct pmbus_sensor_attr *attr)
+				      const struct pmbus_sensor_attr *attr,
+				      bool paged)
 {
 	struct pmbus_sensor *base;
 	bool upper = !!(attr->gbit & 0xff00);	/* need to check STATUS_WORD */
@@ -1238,7 +1239,7 @@ static int pmbus_add_sensor_attrs_one(struct i2c_client *client,
 
 	if (attr->label) {
 		ret = pmbus_add_label(data, name, index, attr->label,
-				      attr->paged ? page + 1 : 0);
+				      paged ? page + 1 : 0);
 		if (ret)
 			return ret;
 	}
@@ -1271,6 +1272,30 @@ static int pmbus_add_sensor_attrs_one(struct i2c_client *client,
 	return 0;
 }
 
+static bool pmbus_sensor_is_paged(const struct pmbus_driver_info *info,
+				  const struct pmbus_sensor_attr *attr)
+{
+	int p;
+
+	if (attr->paged)
+		return true;
+
+	/*
+	 * Some attributes may be present on more than one page despite
+	 * not being marked with the paged attribute. If that is the case,
+	 * then treat the sensor as being paged and add the page suffix to the
+	 * attribute name.
+	 * We don't just add the paged attribute to all such attributes, in
+	 * order to maintain the un-suffixed labels in the case where the
+	 * attribute is only on page 0.
+	 */
+	for (p = 1; p < info->pages; p++) {
+		if (info->func[p] & attr->func)
+			return true;
+	}
+	return false;
+}
+
 static int pmbus_add_sensor_attrs(struct i2c_client *client,
 				  struct pmbus_data *data,
 				  const char *name,
@@ -1284,14 +1309,15 @@ static int pmbus_add_sensor_attrs(struct i2c_client *client,
 	index = 1;
 	for (i = 0; i < nattrs; i++) {
 		int page, pages;
+		bool paged = pmbus_sensor_is_paged(info, attrs);
 
-		pages = attrs->paged ? info->pages : 1;
+		pages = paged ? info->pages : 1;
 		for (page = 0; page < pages; page++) {
 			if (!(info->func[page] & attrs->func))
 				continue;
 			ret = pmbus_add_sensor_attrs_one(client, data, info,
 							 name, index, page,
-							 attrs);
+							 attrs, paged);
 			if (ret)
 				return ret;
 			index++;
Signature · 1 line
2.20.1
author maintainer
#87 lore raw

PATCH 87/121 arm64: Silence gcc warnings about arch ABI drift

In reply to Greg Kroah-Hartman

[ Upstream commit ebcc5928c5d925b1c8d968d9c89cdb0d0186db17 ]

Since GCC 9, the compiler warns about evolution of the platform-specific ABI, in particular relating for the marshaling of certain structures involving bitfields.

The kernel is a standalone binary, and of course nobody would be so stupid as to expose structs containing bitfields as function arguments in ABI. (Passing a pointer to such a struct, however inadvisable, should be unaffected by this change. perf and various drivers rely on that.)

So these warnings do more harm than good: turn them off.

We may miss warnings about future ABI drift, but that's too bad. Future ABI breaks of this class will have to be debugged and fixed the traditional way unless the compiler evolves finer-grained diagnostics.

---
 arch/arm64/Makefile | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/Makefile +1 -0
index b025304bde46..8fbd583b18e1 100644
@@ -51,6 +51,7 @@ endif
 
 KBUILD_CFLAGS	+= -mgeneral-regs-only $(lseinstr) $(brokengasinst)
 KBUILD_CFLAGS	+= -fno-asynchronous-unwind-tables
+KBUILD_CFLAGS	+= -Wno-psabi
 KBUILD_AFLAGS	+= $(lseinstr) $(brokengasinst)
 
 KBUILD_CFLAGS	+= $(call cc-option,-mabi=lp64)
Signature · 1 line
2.20.1
author maintainer
#88 lore raw

PATCH 88/121 nvme: Fix u32 overflow in the number of namespace list calculation

In reply to Greg Kroah-Hartman

[ Upstream commit c8e8c77b3bdbade6e26e8e76595f141ede12b692 ]

The Number of Namespaces (nn) field in the identify controller data structure is defined as u32 and the maximum allowed value in NVMe specification is 0xFFFFFFFEUL. This change fixes the possible overflow of the DIV_ROUND_UP() operation used in nvme_scan_ns_list() by casting the nn to u64.

---
 drivers/nvme/host/core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/nvme/host/core.c +2 -1
index 35d2202ee2fd..3a390b2c7540 100644
@@ -3397,7 +3397,8 @@ static int nvme_scan_ns_list(struct nvme_ctrl *ctrl, unsigned nn)
 {
 	struct nvme_ns *ns;
 	__le32 *ns_list;
-	unsigned i, j, nsid, prev = 0, num_lists = DIV_ROUND_UP(nn, 1024);
+	unsigned i, j, nsid, prev = 0;
+	unsigned num_lists = DIV_ROUND_UP_ULL((u64)nn, 1024);
 	int ret = 0;
 
 	ns_list = kzalloc(NVME_IDENTIFY_DATA_SIZE, GFP_KERNEL);
Signature · 1 line
2.20.1
author maintainer
#89 lore raw

PATCH 89/121 ovl: detect overlapping layers

In reply to Greg Kroah-Hartman

[ Upstream commit 146d62e5a5867fbf84490d82455718bfb10fe824 ]

Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations.

User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did:

    https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000

Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior.

This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes.

On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir.

On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount.

Some examples:

$ ./run --ov --samefs -s
...
( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt
  mount -o bind base/lower lower
  mount -o bind base/upper upper
  mount -t overlay none mnt ...
        -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w)
$ umount mnt
$ mount -t overlay none mnt ...
        -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w
  [   94.434900] overlayfs: overlapping upperdir path
  mount: mount overlay on mnt failed: Too many levels of symbolic links
$ mount -t overlay none mnt ...
        -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w
  [  151.350132] overlayfs: conflicting lowerdir path
  mount: none is already mounted or mnt busy
$ mount -t overlay none mnt ...
        -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w
  [  201.205045] overlayfs: overlapping lowerdir path
  mount: mount overlay on mnt failed: Too many levels of symbolic links
$ mount -t overlay none mnt ...
        -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w
$ mv base/upper/0/ base/lower/
$ find mnt/0
  mnt/0
  mnt/0/w
  find: 'mnt/0/w/work': Too many levels of symbolic links
  find: 'mnt/0/u': Too many levels of symbolic links
---
 fs/overlayfs/inode.c     |  48 +++++++++++
 fs/overlayfs/namei.c     |   8 ++
 fs/overlayfs/overlayfs.h |   3 +
 fs/overlayfs/ovl_entry.h |   6 ++
 fs/overlayfs/super.c     | 169 +++++++++++++++++++++++++++++++++++----
 fs/overlayfs/util.c      |  12 +++
 6 files changed, 229 insertions(+), 17 deletions(-)
fs/overlayfs/inode.c +48 -0
index b48273e846ad..f7eba21effa5 100644
@@ -777,6 +777,54 @@ struct inode *ovl_lookup_inode(struct super_block *sb, struct dentry *real,
 	return inode;
 }
 
+bool ovl_lookup_trap_inode(struct super_block *sb, struct dentry *dir)
+{
+	struct inode *key = d_inode(dir);
+	struct inode *trap;
+	bool res;
+
+	trap = ilookup5(sb, (unsigned long) key, ovl_inode_test, key);
+	if (!trap)
+		return false;
+
+	res = IS_DEADDIR(trap) && !ovl_inode_upper(trap) &&
+				  !ovl_inode_lower(trap);
+
+	iput(trap);
+	return res;
+}
+
+/*
+ * Create an inode cache entry for layer root dir, that will intentionally
+ * fail ovl_verify_inode(), so any lookup that will find some layer root
+ * will fail.
+ */
+struct inode *ovl_get_trap_inode(struct super_block *sb, struct dentry *dir)
+{
+	struct inode *key = d_inode(dir);
+	struct inode *trap;
+
+	if (!d_is_dir(dir))
+		return ERR_PTR(-ENOTDIR);
+
+	trap = iget5_locked(sb, (unsigned long) key, ovl_inode_test,
+			    ovl_inode_set, key);
+	if (!trap)
+		return ERR_PTR(-ENOMEM);
+
+	if (!(trap->i_state & I_NEW)) {
+		/* Conflicting layer roots? */
+		iput(trap);
+		return ERR_PTR(-ELOOP);
+	}
+
+	trap->i_mode = S_IFDIR;
+	trap->i_flags = S_DEAD;
+	unlock_new_inode(trap);
+
+	return trap;
+}
+
 /*
  * Does overlay inode need to be hashed by lower inode?
  */
fs/overlayfs/namei.c +8 -0
index efd372312ef1..badf039267a2 100644
@@ -18,6 +18,7 @@
 #include "overlayfs.h"
 
 struct ovl_lookup_data {
+	struct super_block *sb;
 	struct qstr name;
 	bool is_dir;
 	bool opaque;
@@ -244,6 +245,12 @@ static int ovl_lookup_single(struct dentry *base, struct ovl_lookup_data *d,
 		if (!d->metacopy || d->last)
 			goto out;
 	} else {
+		if (ovl_lookup_trap_inode(d->sb, this)) {
+			/* Caught in a trap of overlapping layers */
+			err = -ELOOP;
+			goto out_err;
+		}
+
 		if (last_element)
 			d->is_dir = true;
 		if (d->last)
@@ -819,6 +826,7 @@ struct dentry *ovl_lookup(struct inode *dir, struct dentry *dentry,
 	int err;
 	bool metacopy = false;
 	struct ovl_lookup_data d = {
+		.sb = dentry->d_sb,
 		.name = dentry->d_name,
 		.is_dir = false,
 		.opaque = false,
fs/overlayfs/overlayfs.h +3 -0
index d26efed9f80a..cec40077b522 100644
@@ -270,6 +270,7 @@ void ovl_clear_flag(unsigned long flag, struct inode *inode);
 bool ovl_test_flag(unsigned long flag, struct inode *inode);
 bool ovl_inuse_trylock(struct dentry *dentry);
 void ovl_inuse_unlock(struct dentry *dentry);
+bool ovl_is_inuse(struct dentry *dentry);
 bool ovl_need_index(struct dentry *dentry);
 int ovl_nlink_start(struct dentry *dentry);
 void ovl_nlink_end(struct dentry *dentry);
@@ -376,6 +377,8 @@ struct ovl_inode_params {
 struct inode *ovl_new_inode(struct super_block *sb, umode_t mode, dev_t rdev);
 struct inode *ovl_lookup_inode(struct super_block *sb, struct dentry *real,
 			       bool is_upper);
+bool ovl_lookup_trap_inode(struct super_block *sb, struct dentry *dir);
+struct inode *ovl_get_trap_inode(struct super_block *sb, struct dentry *dir);
 struct inode *ovl_get_inode(struct super_block *sb,
 			    struct ovl_inode_params *oip);
 static inline void ovl_copyattr(struct inode *from, struct inode *to)
fs/overlayfs/ovl_entry.h +6 -0
index ec237035333a..6ed1ace8f8b3 100644
@@ -29,6 +29,8 @@ struct ovl_sb {
 
 struct ovl_layer {
 	struct vfsmount *mnt;
+	/* Trap in ovl inode cache */
+	struct inode *trap;
 	struct ovl_sb *fs;
 	/* Index of this layer in fs root (upper idx == 0) */
 	int idx;
@@ -65,6 +67,10 @@ struct ovl_fs {
 	/* Did we take the inuse lock? */
 	bool upperdir_locked;
 	bool workdir_locked;
+	/* Traps in ovl inode cache */
+	struct inode *upperdir_trap;
+	struct inode *workdir_trap;
+	struct inode *indexdir_trap;
 	/* Inode numbers in all layers do not use the high xino_bits */
 	unsigned int xino_bits;
 };
fs/overlayfs/super.c +152 -17

304 lines not on this page · raw message

fs/overlayfs/util.c +12 -0
index 4035e640f402..e135064e87ad 100644
@@ -652,6 +652,18 @@ void ovl_inuse_unlock(struct dentry *dentry)
 	}
 }
 
+bool ovl_is_inuse(struct dentry *dentry)
+{
+	struct inode *inode = d_inode(dentry);
+	bool inuse;
+
+	spin_lock(&inode->i_lock);
+	inuse = (inode->i_state & I_OVL_INUSE);
+	spin_unlock(&inode->i_lock);
+
+	return inuse;
+}
+
 /*
  * Does this overlay dentry need to be indexed on copy up?
  */
Signature · 1 line
2.20.1
author maintainer
#72 lore raw

PATCH 72/121 drm/arm/hdlcd: Allow a bit of clock tolerance

In reply to Greg Kroah-Hartman

[ Upstream commit 1c810739097fdeb31b393b67a0a1e3d7ffdd9f63 ]

On the Arm Juno platform, the HDLCD pixel clock is constrained to 250KHz resolution in order to avoid the tiny System Control Processor spending aeons trying to calculate exact PLL coefficients. This means that modes like my oddball 1600x1200 with 130.89MHz clock get rejected since the rate cannot be matched exactly. In practice, though, this mode works quite happily with the clock at 131MHz, so let's relax the check to allow a little bit of slop.

---
 drivers/gpu/drm/arm/hdlcd_crtc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/arm/hdlcd_crtc.c +2 -1
index ecac6fe0b213..a3efa28436ea 100644
@@ -193,7 +193,8 @@ static enum drm_mode_status hdlcd_crtc_mode_valid(struct drm_crtc *crtc,
 	long rate, clk_rate = mode->clock * 1000;
 
 	rate = clk_round_rate(hdlcd->clk, clk_rate);
-	if (rate != clk_rate) {
+	/* 0.1% seems a close enough tolerance for the TDA19988 on Juno */
+	if (abs(rate - clk_rate) * 1000 > clk_rate) {
 		/* clock required by mode not supported by hardware */
 		return MODE_NOCLOCK;
 	}
Signature · 1 line
2.20.1
author maintainer
#91 lore raw

PATCH 91/121 ovl: fix bogus -Wmaybe-unitialized warning

In reply to Greg Kroah-Hartman

[ Upstream commit 1dac6f5b0ed2601be21bb4e27a44b0c3e667b7f4 ]

gcc gets a bit confused by the logic in ovl_setup_trap() and can't figure out whether the local 'trap' variable in the caller was initialized or not:

fs/overlayfs/super.c: In function 'ovl_fill_super':
fs/overlayfs/super.c:1333:4: error: 'trap' may be used uninitialized in this function [-Werror=maybe-uninitialized]

    iput(trap);
    ^~~~~~~~~~

fs/overlayfs/super.c:1312:17: note: 'trap' was declared here

Reword slightly to make it easier for the compiler to understand.

Fixes 146d62e5a586 ("ovl: detect overlapping layers")
---
 fs/overlayfs/super.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
fs/overlayfs/super.c +2 -2
index fa5060f59b88..9780617c69ee 100644
@@ -996,8 +996,8 @@ static int ovl_setup_trap(struct super_block *sb, struct dentry *dir,
 	int err;
 
 	trap = ovl_get_trap_inode(sb, dir);
-	err = PTR_ERR(trap);
-	if (IS_ERR(trap)) {
+	err = PTR_ERR_OR_ZERO(trap);
+	if (err) {
 		if (err == -ELOOP)
 			pr_err("overlayfs: conflicting %s path\n", name);
 		return err;
Signature · 1 line
2.20.1
author maintainer
#94 lore raw

PATCH 94/121 can: flexcan: fix timeout when set small bitrate

In reply to Greg Kroah-Hartman

From: Joakim Zhang <[email protected]>

commit 247e5356a709eb49a0d95ff2a7f07dac05c8252c upstream.

Current we can meet timeout issue when setting a small bitrate like 10000 as follows on i.MX6UL EVK board (ipg clock = 66MHZ, per clock = 30MHZ):

| root@imx6ul7d:~# ip link set can0 up type can bitrate 10000

A link change request failed with some changes committed already. Interface can0 may have been left with an inconsistent configuration, please check.

| RTNETLINK answers: Connection timed out

It is caused by calling of flexcan_chip_unfreeze() timeout.

Originally the code is using usleep_range(10, 20) for unfreeze operation, but the patch (8badd65 can: flexcan: avoid calling usleep_range from interrupt context) changed it into udelay(10) which is only a half delay of before, there're also some other delay changes.

After double to FLEXCAN_TIMEOUT_US to 100 can fix the issue.

Meanwhile, Rasmus Villemoes reported that even with a timeout of 100, flexcan_probe() fails on the MPC8309, which requires a value of at least 140 to work reliably. 250 works for everyone.

---
 drivers/net/can/flexcan.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/can/flexcan.c +1 -1
@@ -166,7 +166,7 @@
 #define FLEXCAN_MB_CNT_LENGTH(x)	(((x) & 0xf) << 16)
 #define FLEXCAN_MB_CNT_TIMESTAMP(x)	((x) & 0xffff)
 
-#define FLEXCAN_TIMEOUT_US		(50)
+#define FLEXCAN_TIMEOUT_US		(250)
 
 /* FLEXCAN hardware feature flags
  *
author maintainer
#96 lore raw

PATCH 96/121 riscv: mm: synchronize MMU after pte change

In reply to Greg Kroah-Hartman

From: ShihPo Hung <[email protected]>

commit bf587caae305ae3b4393077fb22c98478ee55755 upstream.

Because RISC-V compliant implementations can cache invalid entries in TLB, an SFENCE.VMA is necessary after changes to the page table. This patch adds an SFENCE.vma for the vmalloc_fault path.

[[email protected]: reversed tab->whitespace conversion,
wrapped comment lines]

---
 arch/riscv/mm/fault.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)
arch/riscv/mm/fault.c +13 -0
@@ -29,6 +29,7 @@
 
 #include <asm/pgalloc.h>
 #include <asm/ptrace.h>
+#include <asm/tlbflush.h>
 
 /*
  * This routine handles page faults.  It determines the address and the
@@ -281,6 +282,18 @@ vmalloc_fault:
 		pte_k = pte_offset_kernel(pmd_k, addr);
 		if (!pte_present(*pte_k))
 			goto no_context;
+
+		/*
+		 * The kernel assumes that TLBs don't cache invalid
+		 * entries, but in RISC-V, SFENCE.VMA specifies an
+		 * ordering constraint, not a cache flush; it is
+		 * necessary even after writing invalid entries.
+		 * Relying on flush_tlb_fix_spurious_fault would
+		 * suffice, but the extra traps reduce
+		 * performance. So, eagerly SFENCE.VMA.
+		 */
+		local_flush_tlb_page(addr);
+
 		return;
 	}
 }
author maintainer
#97 lore raw

PATCH 97/121 powerpc/bpf: use unsigned division instruction for 64-bit operations

In reply to Greg Kroah-Hartman

From: Naveen N. Rao <[email protected]>

commit 758f2046ea040773ae8ea7f72dd3bbd8fa984501 upstream.

BPF_ALU64 div/mod operations are currently using signed division, unlike BPF_ALU32 operations. Fix the same. DIV64 and MOD64 overflow tests pass with this fix.

Fixes 156d0e290e969c ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF")
---
 arch/powerpc/include/asm/ppc-opcode.h |    1 +
 arch/powerpc/net/bpf_jit.h            |    2 +-
 arch/powerpc/net/bpf_jit_comp64.c     |    8 ++++----
 3 files changed, 6 insertions(+), 5 deletions(-)
arch/powerpc/include/asm/ppc-opcode.h +1 -0
@@ -342,6 +342,7 @@
 #define PPC_INST_MADDLD			0x10000033
 #define PPC_INST_DIVWU			0x7c000396
 #define PPC_INST_DIVD			0x7c0003d2
+#define PPC_INST_DIVDU			0x7c000392
 #define PPC_INST_RLWINM			0x54000000
 #define PPC_INST_RLWINM_DOT		0x54000001
 #define PPC_INST_RLWIMI			0x50000000
arch/powerpc/net/bpf_jit.h +1 -1
@@ -116,7 +116,7 @@
 				     ___PPC_RA(a) | IMM_L(i))
 #define PPC_DIVWU(d, a, b)	EMIT(PPC_INST_DIVWU | ___PPC_RT(d) |	      \
 				     ___PPC_RA(a) | ___PPC_RB(b))
-#define PPC_DIVD(d, a, b)	EMIT(PPC_INST_DIVD | ___PPC_RT(d) |	      \
+#define PPC_DIVDU(d, a, b)	EMIT(PPC_INST_DIVDU | ___PPC_RT(d) |	      \
 				     ___PPC_RA(a) | ___PPC_RB(b))
 #define PPC_AND(d, a, b)	EMIT(PPC_INST_AND | ___PPC_RA(d) |	      \
 				     ___PPC_RS(a) | ___PPC_RB(b))
arch/powerpc/net/bpf_jit_comp64.c +4 -4
@@ -399,12 +399,12 @@ static int bpf_jit_build_body(struct bpf
 		case BPF_ALU64 | BPF_DIV | BPF_X: /* dst /= src */
 		case BPF_ALU64 | BPF_MOD | BPF_X: /* dst %= src */
 			if (BPF_OP(code) == BPF_MOD) {
-				PPC_DIVD(b2p[TMP_REG_1], dst_reg, src_reg);
+				PPC_DIVDU(b2p[TMP_REG_1], dst_reg, src_reg);
 				PPC_MULD(b2p[TMP_REG_1], src_reg,
 						b2p[TMP_REG_1]);
 				PPC_SUB(dst_reg, dst_reg, b2p[TMP_REG_1]);
 			} else
-				PPC_DIVD(dst_reg, dst_reg, src_reg);
+				PPC_DIVDU(dst_reg, dst_reg, src_reg);
 			break;
 		case BPF_ALU | BPF_MOD | BPF_K: /* (u32) dst %= (u32) imm */
 		case BPF_ALU | BPF_DIV | BPF_K: /* (u32) dst /= (u32) imm */
@@ -432,7 +432,7 @@ static int bpf_jit_build_body(struct bpf
 				break;
 			case BPF_ALU64:
 				if (BPF_OP(code) == BPF_MOD) {
-					PPC_DIVD(b2p[TMP_REG_2], dst_reg,
+					PPC_DIVDU(b2p[TMP_REG_2], dst_reg,
 							b2p[TMP_REG_1]);
 					PPC_MULD(b2p[TMP_REG_1],
 							b2p[TMP_REG_1],
@@ -440,7 +440,7 @@ static int bpf_jit_build_body(struct bpf
 					PPC_SUB(dst_reg, dst_reg,
 							b2p[TMP_REG_1]);
 				} else
-					PPC_DIVD(dst_reg, dst_reg,
+					PPC_DIVDU(dst_reg, dst_reg,
 							b2p[TMP_REG_1]);
 				break;
 			}
author maintainer
#98 lore raw

PATCH 98/121 ARM: imx: cpuidle-imx6sx: Restrict the SW2ISO increase to i.MX6SX

In reply to Greg Kroah-Hartman

From: Fabio Estevam <[email protected]>

commit b25af2ff7c07bd19af74e3f64ff82e2880d13d81 upstream.

Since commit 1e434b703248 ("ARM: imx: update the cpu power up timing setting on i.mx6sx") some characters loss is noticed on i.MX6ULL UART as reported by Christoph Niedermaier.

The intention of such commit was to increase the SW2ISO field for i.MX6SX only, but since cpuidle-imx6sx is also used on i.MX6UL/i.MX6ULL this caused unintended side effects on other SoCs.

Fix this problem by keeping the original SW2ISO value for i.MX6UL/i.MX6ULL and only increase SW2ISO in the i.MX6SX case.

---
 arch/arm/mach-imx/cpuidle-imx6sx.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm/mach-imx/cpuidle-imx6sx.c +2 -1
@@ -15,6 +15,7 @@
 
 #include "common.h"
 #include "cpuidle.h"
+#include "hardware.h"
 
 static int imx6sx_idle_finish(unsigned long val)
 {
@@ -110,7 +111,7 @@ int __init imx6sx_cpuidle_init(void)
 	 * except for power up sw2iso which need to be
 	 * larger than LDO ramp up time.
 	 */
-	imx_gpc_set_arm_power_up_timing(0xf, 1);
+	imx_gpc_set_arm_power_up_timing(cpu_is_imx6sx() ? 0xf : 0x2, 1);
 	imx_gpc_set_arm_power_down_timing(1, 1);
 
 	return cpuidle_register(&imx6sx_cpuidle_driver, NULL);
author maintainer
#73 lore raw

PATCH 73/121 nvmet: fix data_len to 0 for bdev-backed write_zeroes

In reply to Greg Kroah-Hartman

[ Upstream commit 3562f5d9f21e7779ae442a45197fed6cb247fd22 ]

The WRITE ZEROES command has no data transfer so that we need to initialize the struct (nvmet_req *req)->data_len to 0x0. While (nvmet_req *req)->transfer_len is initialized in nvmet_req_init(), data_len will be initialized by nowhere which might cause the failure with status code NVME_SC_SGL_INVALID_DATA | NVME_SC_DNR randomly. It's because nvmet_req_execute() checks like:

	if (unlikely(req->data_len != req->transfer_len)) {
		req->error_loc = offsetof(struct nvme_common_command, dptr);
		nvmet_req_complete(req, NVME_SC_SGL_INVALID_DATA | NVME_SC_DNR);
	} else
		req->execute(req);

This patch fixes req->data_len not to be a randomly assigned by initializing it to 0x0 when preparing the command in nvmet_bdev_parse_io_cmd().

nvmet_file_parse_io_cmd() which is for file-backed I/O has already initialized the data_len field to 0x0, though.

---
 drivers/nvme/target/io-cmd-bdev.c | 1 +
 1 file changed, 1 insertion(+)
drivers/nvme/target/io-cmd-bdev.c +1 -0
index a065dbfc43b1..a77fd8674ecf 100644
@@ -295,6 +295,7 @@ u16 nvmet_bdev_parse_io_cmd(struct nvmet_req *req)
 		return 0;
 	case nvme_cmd_write_zeroes:
 		req->execute = nvmet_bdev_execute_write_zeroes;
+		req->data_len = 0;
 		return 0;
 	default:
 		pr_err("unhandled cmd %d on qid %d\n", cmd->common.opcode,
Signature · 1 line
2.20.1
author maintainer
#100 lore raw

PATCH 100/121 ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values

In reply to Greg Kroah-Hartman

From: Faiz Abbas <[email protected]>

commit c3c0b70cd3f801bded7a548198ee1c9851a0ca82 upstream.

Update the MMC2_HS200_MANUAL1 iodelay values to match with the latest dra76x data manual[1]. The new iodelay values will have better marginality and should prevent issues in corner cases.

Also this particular pinctrl-array is using spaces instead of tabs for spacing between the values and the comments. Fix this as well.

[1] http://www.ti.com/lit/ds/symlink/dra76p.pdf

---
 arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi |   40 +++++++++++++++---------------
 1 file changed, 20 insertions(+), 20 deletions(-)
arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi +20 -20
@@ -22,7 +22,7 @@
  *
  * Datamanual Revisions:
  *
- * DRA76x Silicon Revision 1.0: SPRS993A, Revised July 2017
+ * DRA76x Silicon Revision 1.0: SPRS993E, Revised December 2018
  *
  */
 
@@ -169,25 +169,25 @@
 	/* Corresponds to MMC2_HS200_MANUAL1 in datamanual */
 	mmc2_iodelay_hs200_conf: mmc2_iodelay_hs200_conf {
 		pinctrl-pin-array = <
-			0x190 A_DELAY_PS(384) G_DELAY_PS(0)       /* CFG_GPMC_A19_OEN */
-			0x194 A_DELAY_PS(0) G_DELAY_PS(174)       /* CFG_GPMC_A19_OUT */
-			0x1a8 A_DELAY_PS(410) G_DELAY_PS(0)       /* CFG_GPMC_A20_OEN */
-			0x1ac A_DELAY_PS(85) G_DELAY_PS(0)        /* CFG_GPMC_A20_OUT */
-			0x1b4 A_DELAY_PS(468) G_DELAY_PS(0)       /* CFG_GPMC_A21_OEN */
-			0x1b8 A_DELAY_PS(139) G_DELAY_PS(0)       /* CFG_GPMC_A21_OUT */
-			0x1c0 A_DELAY_PS(676) G_DELAY_PS(0)       /* CFG_GPMC_A22_OEN */
-			0x1c4 A_DELAY_PS(69) G_DELAY_PS(0)        /* CFG_GPMC_A22_OUT */
-			0x1d0 A_DELAY_PS(1062) G_DELAY_PS(154)	  /* CFG_GPMC_A23_OUT */
-			0x1d8 A_DELAY_PS(640) G_DELAY_PS(0)       /* CFG_GPMC_A24_OEN */
-			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)         /* CFG_GPMC_A24_OUT */
-			0x1e4 A_DELAY_PS(356) G_DELAY_PS(0)       /* CFG_GPMC_A25_OEN */
-			0x1e8 A_DELAY_PS(0) G_DELAY_PS(0)         /* CFG_GPMC_A25_OUT */
-			0x1f0 A_DELAY_PS(579) G_DELAY_PS(0)       /* CFG_GPMC_A26_OEN */
-			0x1f4 A_DELAY_PS(0) G_DELAY_PS(0)         /* CFG_GPMC_A26_OUT */
-			0x1fc A_DELAY_PS(435) G_DELAY_PS(0)       /* CFG_GPMC_A27_OEN */
-			0x200 A_DELAY_PS(36) G_DELAY_PS(0)        /* CFG_GPMC_A27_OUT */
-			0x364 A_DELAY_PS(759) G_DELAY_PS(0)       /* CFG_GPMC_CS1_OEN */
-			0x368 A_DELAY_PS(72) G_DELAY_PS(0)        /* CFG_GPMC_CS1_OUT */
+			0x190 A_DELAY_PS(384) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
+			0x194 A_DELAY_PS(350) G_DELAY_PS(174)	/* CFG_GPMC_A19_OUT */
+			0x1a8 A_DELAY_PS(410) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
+			0x1ac A_DELAY_PS(335) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
+			0x1b4 A_DELAY_PS(468) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
+			0x1b8 A_DELAY_PS(339) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
+			0x1c0 A_DELAY_PS(676) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
+			0x1c4 A_DELAY_PS(219) G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
+			0x1d0 A_DELAY_PS(1062) G_DELAY_PS(154)	/* CFG_GPMC_A23_OUT */
+			0x1d8 A_DELAY_PS(640) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
+			0x1dc A_DELAY_PS(150) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
+			0x1e4 A_DELAY_PS(356) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
+			0x1e8 A_DELAY_PS(150) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
+			0x1f0 A_DELAY_PS(579) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
+			0x1f4 A_DELAY_PS(200) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
+			0x1fc A_DELAY_PS(435) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
+			0x200 A_DELAY_PS(236) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
+			0x364 A_DELAY_PS(759) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
+			0x368 A_DELAY_PS(372) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
 	      >;
 	};
 
author maintainer
#101 lore raw

PATCH 101/121 ARM: dts: am57xx-idk: Remove support for voltage switching for SD card

In reply to Greg Kroah-Hartman

From: Faiz Abbas <[email protected]>

commit 88a748419b84187fd1da05637b8e5928b04a1e06 upstream.

If UHS speed modes are enabled, a compatible SD card switches down to 1.8V during enumeration. If after this a software reboot/crash takes place and on-chip ROM tries to enumerate the SD card, the difference in IO voltages (host @ 3.3V and card @ 1.8V) may end up damaging the card.

The fix for this is to have support for power cycling the card in hardware (with a PORz/soft-reset line causing a power cycle of the card). Since am571x-, am572x- and am574x-idk don't have this capability, disable voltage switching for these boards.

The major effect of this is that the maximum supported speed mode is now high speed(50 MHz) down from SDR104(200 MHz).

---
 arch/arm/boot/dts/am57xx-idk-common.dtsi |    1 +
 1 file changed, 1 insertion(+)
arch/arm/boot/dts/am57xx-idk-common.dtsi +1 -0
@@ -420,6 +420,7 @@
 	vqmmc-supply = <&ldo1_reg>;
 	bus-width = <4>;
 	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+	no-1-8-v;
 };
 
 &mmc2 {
author maintainer
#103 lore raw

PATCH 103/121 arm64: ssbd: explicitly depend on <linux/prctl.h>

In reply to Greg Kroah-Hartman

From: Anisse Astier <[email protected]>

commit adeaa21a4b6954e878f3f7d1c5659ed9c1fe567a upstream.

Fix ssbd.c which depends implicitly on asm/ptrace.h including linux/prctl.h (through for example linux/compat.h, then linux/time.h, linux/seqlock.h, linux/spinlock.h and linux/irqflags.h), and uses PR_SPEC* defines.

This is an issue since we'll soon be removing the include from asm/ptrace.h.

Fixes 9cdc0108baa8 ("arm64: ssbd: Add prctl interface for per-thread mitigation")
---
 arch/arm64/kernel/ssbd.c |    1 +
 1 file changed, 1 insertion(+)
arch/arm64/kernel/ssbd.c +1 -0
@@ -5,6 +5,7 @@
 
 #include <linux/compat.h>
 #include <linux/errno.h>
+#include <linux/prctl.h>
 #include <linux/sched.h>
 #include <linux/sched/task_stack.h>
 #include <linux/thread_info.h>
author maintainer
#104 lore raw

PATCH 104/121 KVM: x86/mmu: Allocate PAE root array when using SVMs 32-bit NPT

In reply to Greg Kroah-Hartman

From: Sean Christopherson <[email protected]>

commit b6b80c78af838bef17501416d5d383fedab0010a upstream.

SVM's Nested Page Tables (NPT) reuses x86 paging for the host-controlled page walk. For 32-bit KVM, this means PAE paging is used even when TDP is enabled, i.e. the PAE root array needs to be allocated.

Fixes ee6268ba3a68 ("KVM: x86: Skip pae_root shadow allocation if tdp enabled")
---
 arch/x86/kvm/mmu.c |   16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)
arch/x86/kvm/mmu.c +10 -6
@@ -5591,14 +5591,18 @@ static int alloc_mmu_pages(struct kvm_vc
 	struct page *page;
 	int i;
 
-	if (tdp_enabled)
-		return 0;
-
 	/*
-	 * When emulating 32-bit mode, cr3 is only 32 bits even on x86_64.
-	 * Therefore we need to allocate shadow page tables in the first
-	 * 4GB of memory, which happens to fit the DMA32 zone.
+	 * When using PAE paging, the four PDPTEs are treated as 'root' pages,
+	 * while the PDP table is a per-vCPU construct that's allocated at MMU
+	 * creation.  When emulating 32-bit mode, cr3 is only 32 bits even on
+	 * x86_64.  Therefore we need to allocate the PDP table in the first
+	 * 4GB of memory, which happens to fit the DMA32 zone.  Except for
+	 * SVM's 32-bit NPT support, TDP paging doesn't use PAE paging and can
+	 * skip allocating the PDP table.
 	 */
+	if (tdp_enabled && kvm_x86_ops->get_tdp_level(vcpu) > PT32E_ROOT_LEVEL)
+		return 0;
+
 	page = alloc_page(GFP_KERNEL_ACCOUNT | __GFP_DMA32);
 	if (!page)
 		return -ENOMEM;
author maintainer
#106 lore raw

PATCH 106/121 drm/vmwgfx: Use the backdoor port if the HB port is not available

In reply to Greg Kroah-Hartman

From: Thomas Hellstrom <[email protected]>

commit cc0ba0d8624f210995924bb57a8b181ce8976606 upstream.

The HB port may not be available for various reasons. Either it has been disabled by a config option or by the hypervisor for other reasons. In that case, make sure we have a backup plan and use the backdoor port instead with a performance penalty.

Fixes 89da76fde68d ("drm/vmwgfx: Add VMWare host messaging capability")
---
 drivers/gpu/drm/vmwgfx/vmwgfx_msg.c |  146 ++++++++++++++++++++++++++++--------
 1 file changed, 117 insertions(+), 29 deletions(-)
drivers/gpu/drm/vmwgfx/vmwgfx_msg.c +117 -29
@@ -136,6 +136,114 @@ static int vmw_close_channel(struct rpc_
 	return 0;
 }
 
+/**
+ * vmw_port_hb_out - Send the message payload either through the
+ * high-bandwidth port if available, or through the backdoor otherwise.
+ * @channel: The rpc channel.
+ * @msg: NULL-terminated message.
+ * @hb: Whether the high-bandwidth port is available.
+ *
+ * Return: The port status.
+ */
+static unsigned long vmw_port_hb_out(struct rpc_channel *channel,
+				     const char *msg, bool hb)
+{
+	unsigned long si, di, eax, ebx, ecx, edx;
+	unsigned long msg_len = strlen(msg);
+
+	if (hb) {
+		unsigned long bp = channel->cookie_high;
+
+		si = (uintptr_t) msg;
+		di = channel->cookie_low;
+
+		VMW_PORT_HB_OUT(
+			(MESSAGE_STATUS_SUCCESS << 16) | VMW_PORT_CMD_HB_MSG,
+			msg_len, si, di,
+			VMW_HYPERVISOR_HB_PORT | (channel->channel_id << 16),
+			VMW_HYPERVISOR_MAGIC, bp,
+			eax, ebx, ecx, edx, si, di);
+
+		return ebx;
+	}
+
+	/* HB port not available. Send the message 4 bytes at a time. */
+	ecx = MESSAGE_STATUS_SUCCESS << 16;
+	while (msg_len && (HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS)) {
+		unsigned int bytes = min_t(size_t, msg_len, 4);
+		unsigned long word = 0;
+
+		memcpy(&word, msg, bytes);
+		msg_len -= bytes;
+		msg += bytes;
+		si = channel->cookie_high;
+		di = channel->cookie_low;
+
+		VMW_PORT(VMW_PORT_CMD_MSG | (MSG_TYPE_SENDPAYLOAD << 16),
+			 word, si, di,
+			 VMW_HYPERVISOR_PORT | (channel->channel_id << 16),
+			 VMW_HYPERVISOR_MAGIC,
+			 eax, ebx, ecx, edx, si, di);
+	}
+
+	return ecx;
+}
+
+/**
+ * vmw_port_hb_in - Receive the message payload either through the
+ * high-bandwidth port if available, or through the backdoor otherwise.
+ * @channel: The rpc channel.
+ * @reply: Pointer to buffer holding reply.
+ * @reply_len: Length of the reply.
+ * @hb: Whether the high-bandwidth port is available.
+ *
+ * Return: The port status.
+ */
+static unsigned long vmw_port_hb_in(struct rpc_channel *channel, char *reply,
+				    unsigned long reply_len, bool hb)
+{
+	unsigned long si, di, eax, ebx, ecx, edx;
+
+	if (hb) {
+		unsigned long bp = channel->cookie_low;
+
+		si = channel->cookie_high;
+		di = (uintptr_t) reply;
+
+		VMW_PORT_HB_IN(
+			(MESSAGE_STATUS_SUCCESS << 16) | VMW_PORT_CMD_HB_MSG,
+			reply_len, si, di,
+			VMW_HYPERVISOR_HB_PORT | (channel->channel_id << 16),
+			VMW_HYPERVISOR_MAGIC, bp,
+			eax, ebx, ecx, edx, si, di);
+
+		return ebx;
+	}
+
+	/* HB port not available. Retrieve the message 4 bytes at a time. */
+	ecx = MESSAGE_STATUS_SUCCESS << 16;
+	while (reply_len) {
+		unsigned int bytes = min_t(unsigned long, reply_len, 4);
+
+		si = channel->cookie_high;
+		di = channel->cookie_low;
+
+		VMW_PORT(VMW_PORT_CMD_MSG | (MSG_TYPE_RECVPAYLOAD << 16),
+			 MESSAGE_STATUS_SUCCESS, si, di,
+			 VMW_HYPERVISOR_PORT | (channel->channel_id << 16),
+			 VMW_HYPERVISOR_MAGIC,
+			 eax, ebx, ecx, edx, si, di);
+
+		if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0)
+			break;
+
+		memcpy(reply, &ebx, bytes);
+		reply_len -= bytes;
+		reply += bytes;
+	}
+
+	return ecx;
+}
 
 
 /**
@@ -148,11 +256,10 @@ static int vmw_close_channel(struct rpc_
  */
 static int vmw_send_msg(struct rpc_channel *channel, const char *msg)
 {
-	unsigned long eax, ebx, ecx, edx, si, di, bp;
+	unsigned long eax, ebx, ecx, edx, si, di;
 	size_t msg_len = strlen(msg);
 	int retries = 0;
 
-
 	while (retries < RETRIES) {
 		retries++;
 
@@ -166,23 +273,14 @@ static int vmw_send_msg(struct rpc_chann
 			VMW_HYPERVISOR_MAGIC,
 			eax, ebx, ecx, edx, si, di);
 
-		if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0 ||
-		    (HIGH_WORD(ecx) & MESSAGE_STATUS_HB) == 0) {
-			/* Expected success + high-bandwidth. Give up. */
+		if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0) {
+			/* Expected success. Give up. */
 			return -EINVAL;
 		}
 
 		/* Send msg */
-		si  = (uintptr_t) msg;
-		di  = channel->cookie_low;
-		bp  = channel->cookie_high;
-
-		VMW_PORT_HB_OUT(
-			(MESSAGE_STATUS_SUCCESS << 16) | VMW_PORT_CMD_HB_MSG,
-			msg_len, si, di,
-			VMW_HYPERVISOR_HB_PORT | (channel->channel_id << 16),
-			VMW_HYPERVISOR_MAGIC, bp,
-			eax, ebx, ecx, edx, si, di);
+		ebx = vmw_port_hb_out(channel, msg,
+				      !!(HIGH_WORD(ecx) & MESSAGE_STATUS_HB));
 
 		if ((HIGH_WORD(ebx) & MESSAGE_STATUS_SUCCESS) != 0) {
 			return 0;
@@ -211,7 +309,7 @@ STACK_FRAME_NON_STANDARD(vmw_send_msg);
 static int vmw_recv_msg(struct rpc_channel *channel, void **msg,
 			size_t *msg_len)
 {
-	unsigned long eax, ebx, ecx, edx, si, di, bp;
+	unsigned long eax, ebx, ecx, edx, si, di;
 	char *reply;
 	size_t reply_len;
 	int retries = 0;
@@ -233,8 +331,7 @@ static int vmw_recv_msg(struct rpc_chann
 			VMW_HYPERVISOR_MAGIC,
 			eax, ebx, ecx, edx, si, di);
 
-		if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0 ||
-		    (HIGH_WORD(ecx) & MESSAGE_STATUS_HB) == 0) {
+		if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0) {
 			DRM_ERROR("Failed to get reply size for host message.\n");
 			return -EINVAL;
 		}
@@ -252,17 +349,8 @@ static int vmw_recv_msg(struct rpc_chann
 
 
 		/* Receive buffer */
-		si  = channel->cookie_high;
-		di  = (uintptr_t) reply;
-		bp  = channel->cookie_low;
-
-		VMW_PORT_HB_IN(
-			(MESSAGE_STATUS_SUCCESS << 16) | VMW_PORT_CMD_HB_MSG,
-			reply_len, si, di,
-			VMW_HYPERVISOR_HB_PORT | (channel->channel_id << 16),
-			VMW_HYPERVISOR_MAGIC, bp,
-			eax, ebx, ecx, edx, si, di);
-
+		ebx = vmw_port_hb_in(channel, reply, reply_len,
+				     !!(HIGH_WORD(ecx) & MESSAGE_STATUS_HB));
 		if ((HIGH_WORD(ebx) & MESSAGE_STATUS_SUCCESS) == 0) {
 			kfree(reply);
 
author maintainer
#105 lore raw

PATCH 105/121 ovl: make i_ino consistent with st_ino in more cases

In reply to Greg Kroah-Hartman

From: Amir Goldstein <[email protected]>

commit 6dde1e42f497b2d4e22466f23019016775607947 upstream.

Relax the condition that overlayfs supports nfs export, to require that i_ino is consistent with st_ino/d_ino.

It is enough to require that st_ino and d_ino are consistent.

This fixes the failure of xfstest generic/504, due to mismatch of st_ino to inode number in the output of /proc/locks.

Fixes 12574a9f4c9c ("ovl: consistent i_ino for non-samefs with xino")
Cc <[email protected]> # v4.19
---
 fs/overlayfs/inode.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
fs/overlayfs/inode.c +6 -6
@@ -553,15 +553,15 @@ static void ovl_fill_inode(struct inode
 	int xinobits = ovl_xino_bits(inode->i_sb);
 
 	/*
-	 * When NFS export is enabled and d_ino is consistent with st_ino
-	 * (samefs or i_ino has enough bits to encode layer), set the same
-	 * value used for d_ino to i_ino, because nfsd readdirplus compares
-	 * d_ino values to i_ino values of child entries. When called from
+	 * When d_ino is consistent with st_ino (samefs or i_ino has enough
+	 * bits to encode layer), set the same value used for st_ino to i_ino,
+	 * so inode number exposed via /proc/locks and a like will be
+	 * consistent with d_ino and st_ino values. An i_ino value inconsistent
+	 * with d_ino also causes nfsd readdirplus to fail.  When called from
 	 * ovl_new_inode(), ino arg is 0, so i_ino will be updated to real
 	 * upper inode i_ino on ovl_inode_init() or ovl_inode_update().
 	 */
-	if (inode->i_sb->s_export_op &&
-	    (ovl_same_sb(inode->i_sb) || xinobits)) {
+	if (ovl_same_sb(inode->i_sb) || xinobits) {
 		inode->i_ino = ino;
 		if (xinobits && fsid && !(ino >> (64 - xinobits)))
 			inode->i_ino |= (unsigned long)fsid << (64 - xinobits);
author maintainer
#74 lore raw

PATCH 74/121 kbuild: tar-pkg: enable communication with jobserver

In reply to Greg Kroah-Hartman

[ Upstream commit a6e0487709ded7cd1ba0c390d9771e5cb76a8453 ]

The buildtar script might want to invoke a make, so tell the parent make to pass the jobserver token pipe to the subcommand by prefixing the command with a +.

This addresses the issue seen here:

/bin/sh ../scripts/package/buildtar tar-pkg
make[3]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule.

See https://www.gnu.org/software/make/manual/html_node/Job-Slots.html
for more information.

---
 scripts/package/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
scripts/package/Makefile +1 -1
index 2c6de21e5152..fd854439de0f 100644
@@ -103,7 +103,7 @@ clean-dirs += $(objtree)/snap/
 # ---------------------------------------------------------------------------
 tar%pkg: FORCE
 	$(MAKE) -f $(srctree)/Makefile
-	$(CONFIG_SHELL) $(srctree)/scripts/package/buildtar $@
+	+$(CONFIG_SHELL) $(srctree)/scripts/package/buildtar $@
 
 clean-dirs += $(objtree)/tar-install/
 
Signature · 1 line
2.20.1
author maintainer
#102 lore raw

PATCH 102/121 arm64/sve: <uapi/asm/ptrace.h> should not depend on <uapi/linux/prctl.h>

In reply to Greg Kroah-Hartman

From: Anisse Astier <[email protected]>

commit 35341ca0614ab13e1ef34ad4f29a39e15ef31fa8 upstream.

Pulling linux/prctl.h into asm/ptrace.h in the arm64 UAPI headers causes userspace build issues for any program (e.g. strace and qemu) that includes both <sys/prctl.h> and <linux/ptrace.h> when using musl libc:

  | error: redefinition of 'struct prctl_mm_map'
  |  struct prctl_mm_map {

See https://github.com/foundriesio/meta-lmp/commit/6d4a106e191b5d79c41b9ac78fd321316d3013c0
for a public example of people working around this issue.

Although it's a bit grotty, fix this breakage by duplicating the prctl constant definitions. Since these are part of the kernel ABI, they cannot be changed in future and so it's not the end of the world to have them open-coded.

Fixes 43d4da2c45b2 ("arm64/sve: ptrace and ELF coredump support")
---
 arch/arm64/include/uapi/asm/ptrace.h |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
arch/arm64/include/uapi/asm/ptrace.h +3 -5
@@ -65,8 +65,6 @@
 
 #ifndef __ASSEMBLY__
 
-#include <linux/prctl.h>
-
 /*
  * User structures for general purpose, floating point and debug registers.
  */
@@ -113,10 +111,10 @@ struct user_sve_header {
 
 /*
  * Common SVE_PT_* flags:
- * These must be kept in sync with prctl interface in <linux/ptrace.h>
+ * These must be kept in sync with prctl interface in <linux/prctl.h>
  */
-#define SVE_PT_VL_INHERIT		(PR_SVE_VL_INHERIT >> 16)
-#define SVE_PT_VL_ONEXEC		(PR_SVE_SET_VL_ONEXEC >> 16)
+#define SVE_PT_VL_INHERIT		((1 << 17) /* PR_SVE_VL_INHERIT */ >> 16)
+#define SVE_PT_VL_ONEXEC		((1 << 18) /* PR_SVE_SET_VL_ONEXEC */ >> 16)
 
 
 /*
author maintainer
#95 lore raw

PATCH 95/121 can: purge socket error queue on sock destruct

In reply to Greg Kroah-Hartman

From: Willem de Bruijn <[email protected]>

commit fd704bd5ee749d560e86c4f1fd2ef486d8abf7cf upstream.

CAN supports software tx timestamps as of the below commit. Purge any queued timestamp packets on socket destroy.

Fixes 51f31cabe3ce ("ip: support for TX timestamps on UDP and RAW sockets")
Reported-by [email protected]
Cc linux-stable <[email protected]>
---
 net/can/af_can.c |    1 +
 1 file changed, 1 insertion(+)
net/can/af_can.c +1 -0
@@ -105,6 +105,7 @@ EXPORT_SYMBOL(can_ioctl);
 static void can_sock_destruct(struct sock *sk)
 {
 	skb_queue_purge(&sk->sk_receive_queue);
+	skb_queue_purge(&sk->sk_error_queue);
 }
 
 static const struct can_proto *can_get_proto(int protocol)
author maintainer
#99 lore raw

PATCH 99/121 ARM: mvebu_v7_defconfig: fix Ethernet on Clearfog

In reply to Greg Kroah-Hartman

From: Jan Kundrát <[email protected]>

commit cc538ca4308372e81b824be08561c466b1d73b72 upstream.

Compared to kernel 5.0, patches merged for 5.1 added support for A38x' PHY guarded by a config option which was not enabled by default. As a result, there was no eth1 and eth2 on a Solid Run Clearfog Base.

Ensure that A38x PHY is enabled on mvebu.

[gregory: issue appeared in 5.1 not in 5.2 and added Fixes tag]

Cc Baruch Siach <[email protected]>
Cc Gregory CLEMENT <[email protected]>
Cc Russell King <[email protected]>
Cc David S. Miller <[email protected]>
Cc Maxime Chevallier <[email protected]>
Fixes a10c1c8191e0 ("net: marvell: neta: add comphy support")
---
 arch/arm/configs/mvebu_v7_defconfig |    1 +
 1 file changed, 1 insertion(+)
arch/arm/configs/mvebu_v7_defconfig +1 -0
@@ -131,6 +131,7 @@ CONFIG_MV_XOR=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_MEMORY=y
 CONFIG_PWM=y
+CONFIG_PHY_MVEBU_A38X_COMPHY=y
 CONFIG_EXT4_FS=y
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
author maintainer
#93 lore raw

PATCH 93/121 can: xilinx_can: use correct bittiming_const for CAN FD core

In reply to Greg Kroah-Hartman

From: Anssi Hannula <[email protected]>

commit 904044dd8fff43e289c11a2f90fa532e946a1d8b upstream.

Commit 9e5f1b273e6a ("can: xilinx_can: add support for Xilinx CAN FD core") added a new can_bittiming_const structure for CAN FD cores that support larger values for tseg1, tseg2, and sjw than previous Xilinx CAN cores, but the commit did not actually take that into use.

Fix that.

Tested with CAN FD core on a ZynqMP board.

Fixes 9e5f1b273e6a ("can: xilinx_can: add support for Xilinx CAN FD core")
Cc Michal Simek <[email protected]>
Cc linux-stable <[email protected]>
---
 drivers/net/can/xilinx_can.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/can/xilinx_can.c +1 -1
@@ -1443,7 +1443,7 @@ static const struct xcan_devtype_data xc
 		 XCAN_FLAG_RXMNF |
 		 XCAN_FLAG_TX_MAILBOXES |
 		 XCAN_FLAG_RX_FIFO_MULTI,
-	.bittiming_const = &xcan_bittiming_const,
+	.bittiming_const = &xcan_bittiming_const_canfd,
 	.btr_ts2_shift = XCAN_BTR_TS2_SHIFT_CANFD,
 	.btr_sjw_shift = XCAN_BTR_SJW_SHIFT_CANFD,
 	.bus_clk_name = "s_axi_aclk",
author maintainer
#92 lore raw

PATCH 92/121 btrfs: start readahead also in seed devices

In reply to Greg Kroah-Hartman

From: Naohiro Aota <[email protected]>

commit c4e0540d0ad49c8ceab06cceed1de27c4fe29f6e upstream.

Currently, btrfs does not consult seed devices to start readahead. As a result, if readahead zone is added to the seed devices, btrfs_reada_wait() indefinitely wait for the reada_ctl to finish.

You can reproduce the hung by modifying btrfs/163 to have larger initial file size (e.g. xfs_io pwrite 4M instead of current 256K).

Fixes 7414a03fbf9e ("btrfs: initial readahead code and prototypes")
Cc [email protected] # 3.2+: ce7791ffee1e: Btrfs: fix race between readahead and device replace/removal
---
 fs/btrfs/reada.c |    5 +++++
 1 file changed, 5 insertions(+)
fs/btrfs/reada.c +5 -0
@@ -747,6 +747,7 @@ static void __reada_start_machine(struct
 	u64 total = 0;
 	int i;
 
+again:
 	do {
 		enqueued = 0;
 		mutex_lock(&fs_devices->device_list_mutex);
@@ -758,6 +759,10 @@ static void __reada_start_machine(struct
 		mutex_unlock(&fs_devices->device_list_mutex);
 		total += enqueued;
 	} while (enqueued && total < 10000);
+	if (fs_devices->seed) {
+		fs_devices = fs_devices->seed;
+		goto again;
+	}
 
 	if (enqueued == 0)
 		return;
author maintainer
#90 lore raw

PATCH 90/121 ovl: dont fail with disconnected lower NFS

In reply to Greg Kroah-Hartman

[ Upstream commit 9179c21dc6ed1c993caa5fe4da876a6765c26af7 ]

NFS mounts can be disconnected from fs root. Don't fail the overlapping layer check because of this.

The check is not authoritative anyway, since topology can change during or after the check.

Fixes 146d62e5a586 ("ovl: detect overlapping layers")
---
 fs/overlayfs/super.c | 26 +++++++++-----------------
 1 file changed, 9 insertions(+), 17 deletions(-)
fs/overlayfs/super.c +9 -17
index c481bf5f6fe2..fa5060f59b88 100644
@@ -1472,23 +1472,20 @@ out_err:
  * Check if this layer root is a descendant of:
  * - another layer of this overlayfs instance
  * - upper/work dir of any overlayfs instance
- * - a disconnected dentry (detached root)
  */
 static int ovl_check_layer(struct super_block *sb, struct dentry *dentry,
 			   const char *name)
 {
-	struct dentry *next, *parent;
-	bool is_root = false;
+	struct dentry *next = dentry, *parent;
 	int err = 0;
 
-	if (!dentry || dentry == dentry->d_sb->s_root)
+	if (!dentry)
 		return 0;
 
-	next = dget(dentry);
-	/* Walk back ancestors to fs root (inclusive) looking for traps */
-	do {
-		parent = dget_parent(next);
-		is_root = (parent == next);
+	parent = dget_parent(next);
+
+	/* Walk back ancestors to root (inclusive) looking for traps */
+	while (!err && parent != next) {
 		if (ovl_is_inuse(parent)) {
 			err = -EBUSY;
 			pr_err("overlayfs: %s path overlapping in-use upperdir/workdir\n",
@@ -1497,17 +1494,12 @@ static int ovl_check_layer(struct super_block *sb, struct dentry *dentry,
 			err = -ELOOP;
 			pr_err("overlayfs: overlapping %s path\n", name);
 		}
-		dput(next);
 		next = parent;
-	} while (!err && !is_root);
-
-	/* Did we really walk to fs root or found a detached root? */
-	if (!err && next != dentry->d_sb->s_root) {
-		err = -ESTALE;
-		pr_err("overlayfs: disconnected %s path\n", name);
+		parent = dget_parent(next);
+		dput(next);
 	}
 
-	dput(next);
+	dput(parent);
 
 	return err;
 }
Signature · 1 line
2.20.1
author maintainer
#85 lore raw

PATCH 85/121 hwmon: (core) add thermal sensors only if dev->of_node is present

In reply to Greg Kroah-Hartman

[ Upstream commit c41dd48e21fae3e55b3670ccf2eb562fc1f6a67d ]

Drivers may register to hwmon and request for also registering with the thermal subsystem (HWMON_C_REGISTER_TZ). However, some of these driver, e.g. marvell phy, may be probed from Device Tree or being dynamically allocated, and in the later case, it will not have a dev->of_node entry.

Registering with hwmon without the dev->of_node may result in different outcomes depending on the device tree, which may be a bit misleading. If the device tree blob has no 'thermal-zones' node, the *hwmon_device_register*() family functions are going to gracefully succeed, because of-thermal, *thermal_zone_of_sensor_register() return -ENODEV in this case, and the hwmon error path handles this error code as success to cover for the case where CONFIG_THERMAL_OF is not set. However, if the device tree blob has the 'thermal-zones' entry, the *hwmon_device_register*() will always fail on callers with no dev->of_node, propagating -EINVAL.

If dev->of_node is not present, calling of-thermal does not make sense. For this reason, this patch checks first if the device has a of_node before going over the process of registering with the thermal subsystem of-thermal interface. And in this case, when a caller of *hwmon_device_register*() with HWMON_C_REGISTER_TZ and no dev->of_node will still register with hwmon, but not with the thermal subsystem. If all the hwmon part bits are in place, the registration will succeed.

Fixes d560168b5d0f ("hwmon: (core) New hwmon registration API")
Cc Jean Delvare <[email protected]>
Cc Guenter Roeck <[email protected]>
---
 drivers/hwmon/hwmon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hwmon/hwmon.c +1 -1
index c22dc1e07911..c38883f748a1 100644
@@ -633,7 +633,7 @@ __hwmon_device_register(struct device *dev, const char *name, void *drvdata,
 	if (err)
 		goto free_hwmon;
 
-	if (dev && chip && chip->ops->read &&
+	if (dev && dev->of_node && chip && chip->ops->read &&
 	    chip->info[0]->type == hwmon_chip &&
 	    (chip->info[0]->config[0] & HWMON_C_REGISTER_TZ)) {
 		const struct hwmon_channel_info **info = chip->info;
Signature · 1 line
2.20.1
author maintainer
#80 lore raw

PATCH 80/121 udmabuf: actually unmap the scatterlist

In reply to Greg Kroah-Hartman

[ Upstream commit 283f1e383e91d96fe652fad549537ae15cf31d60 ]

unmap_udmabuf fails to actually unmap the scatterlist, leaving dangling mappings around.

---
 drivers/dma-buf/udmabuf.c | 1 +
 1 file changed, 1 insertion(+)
drivers/dma-buf/udmabuf.c +1 -0
index cd57747286f2..9635897458a0 100644
@@ -77,6 +77,7 @@ static void unmap_udmabuf(struct dma_buf_attachment *at,
 			  struct sg_table *sg,
 			  enum dma_data_direction direction)
 {
+	dma_unmap_sg(at->dev, sg->sgl, sg->nents, direction);
 	sg_free_table(sg);
 	kfree(sg);
 }
Signature · 1 line
2.20.1
author maintainer
#37 lore raw

PATCH 37/121 dmaengine: sprd: Add validation of current descriptor in irq handler

In reply to Greg Kroah-Hartman

[ Upstream commit 58152b0e573e5581c4b9ef7cf06d2e9fafae27d4 ]

When user terminates one DMA channel to free all its descriptors, but at the same time one transaction interrupt was triggered possibly, now we should not handle this interrupt by validating if the 'schan->cur_desc' was set as NULL to avoid crashing the kernel.

---
 drivers/dma/sprd-dma.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/dma/sprd-dma.c +7 -2
index e29342ab85f6..431e289d59a5 100644
@@ -552,12 +552,17 @@ static irqreturn_t dma_irq_handle(int irq, void *dev_id)
 		schan = &sdev->channels[i];
 
 		spin_lock(&schan->vc.lock);
+
+		sdesc = schan->cur_desc;
+		if (!sdesc) {
+			spin_unlock(&schan->vc.lock);
+			return IRQ_HANDLED;
+		}
+
 		int_type = sprd_dma_get_int_type(schan);
 		req_type = sprd_dma_get_req_type(schan);
 		sprd_dma_clear_int(schan);
 
-		sdesc = schan->cur_desc;
-
 		/* cyclic mode schedule callback */
 		cyclic = schan->linklist.phy_addr ? true : false;
 		if (cyclic == true) {
Signature · 1 line
2.20.1
author maintainer
#39 lore raw

PATCH 39/121 dmaengine: sprd: Fix block length overflow

In reply to Greg Kroah-Hartman

[ Upstream commit 89d03b3c126d683f7b2cd5b07178493993d12448 ]

The maximum value of block length is 0xffff, so if the configured transfer length is more than 0xffff, that will cause block length overflow to lead a configuration error.

Thus we can set block length as the maximum burst length to avoid this issue, since the maximum burst length will not be a big value which is more than 0xffff.

---
 drivers/dma/sprd-dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/dma/sprd-dma.c +1 -1
index 0f92e60529d1..a01c23246632 100644
@@ -778,7 +778,7 @@ static int sprd_dma_fill_desc(struct dma_chan *chan,
 	temp |= slave_cfg->src_maxburst & SPRD_DMA_FRG_LEN_MASK;
 	hw->frg_len = temp;
 
-	hw->blk_len = len & SPRD_DMA_BLK_LEN_MASK;
+	hw->blk_len = slave_cfg->src_maxburst & SPRD_DMA_BLK_LEN_MASK;
 	hw->trsc_len = len & SPRD_DMA_TRSC_LEN_MASK;
 
 	temp = (dst_step & SPRD_DMA_TRSF_STEP_MASK) << SPRD_DMA_DEST_TRSF_STEP_OFFSET;
Signature · 1 line
2.20.1
author maintainer
#67 lore raw

PATCH 67/121 net: ethernet: mediatek: Use hw_feature to judge if HWLRO is supported

In reply to Greg Kroah-Hartman

[ Upstream commit 9e4f56f1a7f3287718d0083b5cb85298dc05a5fd ]

Should hw_feature as hardware capability flags to check if hardware LRO got support.

---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/net/ethernet/mediatek/mtk_eth_soc.c +6 -6
index 549d36497b8c..59601cb5aeee 100644
@@ -2297,13 +2297,13 @@ static int mtk_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
 
 	switch (cmd->cmd) {
 	case ETHTOOL_GRXRINGS:
-		if (dev->features & NETIF_F_LRO) {
+		if (dev->hw_features & NETIF_F_LRO) {
 			cmd->data = MTK_MAX_RX_RING_NUM;
 			ret = 0;
 		}
 		break;
 	case ETHTOOL_GRXCLSRLCNT:
-		if (dev->features & NETIF_F_LRO) {
+		if (dev->hw_features & NETIF_F_LRO) {
 			struct mtk_mac *mac = netdev_priv(dev);
 
 			cmd->rule_cnt = mac->hwlro_ip_cnt;
@@ -2311,11 +2311,11 @@ static int mtk_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
 		}
 		break;
 	case ETHTOOL_GRXCLSRULE:
-		if (dev->features & NETIF_F_LRO)
+		if (dev->hw_features & NETIF_F_LRO)
 			ret = mtk_hwlro_get_fdir_entry(dev, cmd);
 		break;
 	case ETHTOOL_GRXCLSRLALL:
-		if (dev->features & NETIF_F_LRO)
+		if (dev->hw_features & NETIF_F_LRO)
 			ret = mtk_hwlro_get_fdir_all(dev, cmd,
 						     rule_locs);
 		break;
@@ -2332,11 +2332,11 @@ static int mtk_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd)
 
 	switch (cmd->cmd) {
 	case ETHTOOL_SRXCLSRLINS:
-		if (dev->features & NETIF_F_LRO)
+		if (dev->hw_features & NETIF_F_LRO)
 			ret = mtk_hwlro_add_ipaddr(dev, cmd);
 		break;
 	case ETHTOOL_SRXCLSRLDEL:
-		if (dev->features & NETIF_F_LRO)
+		if (dev->hw_features & NETIF_F_LRO)
 			ret = mtk_hwlro_del_ipaddr(dev, cmd);
 		break;
 	default:
Signature · 1 line
2.20.1
author maintainer
#65 lore raw

PATCH 65/121 mdesc: fix a missing-check bug in get_vdev_port_node_info()

In reply to Greg Kroah-Hartman

[ Upstream commit 80caf43549e7e41a695c6d1e11066286538b336f ]

In get_vdev_port_node_info(), 'node_info->vdev_port.name' is allcoated by kstrdup_const(), and it returns NULL when fails. So 'node_info->vdev_port.name' should be checked.

---
 arch/sparc/kernel/mdesc.c | 2 ++
 1 file changed, 2 insertions(+)
arch/sparc/kernel/mdesc.c +2 -0
index 9a26b442f820..8e645ddac58e 100644
@@ -356,6 +356,8 @@ static int get_vdev_port_node_info(struct mdesc_handle *md, u64 node,
 
 	node_info->vdev_port.id = *idp;
 	node_info->vdev_port.name = kstrdup_const(name, GFP_KERNEL);
+	if (!node_info->vdev_port.name)
+		return -1;
 	node_info->vdev_port.parent_cfg_hdl = *parent_cfg_hdlp;
 
 	return 0;
Signature · 1 line
2.20.1
author maintainer
#75 lore raw

PATCH 75/121 scripts/checkstack.pl: Fix arm64 wrong or unknown architecture

In reply to Greg Kroah-Hartman

[ Upstream commit 4f45d62a52297b10ded963412a158685647ecdec ]

The following error occurs for the make ARCH=arm64 checkstack case:

aarch64-linux-gnu-objdump -d vmlinux $(find . -name '*.ko') | \
perl ./scripts/checkstack.pl arm64
wrong or unknown architecture "arm64"

As suggested by Masahiro Yamada, fix the above error using regular expressions in the same way it was fixed for the ARCH=x86 case via commit fda9f9903be6 ("scripts/checkstack.pl: automatically handle 32-bit and 64-bit mode for ARCH=x86").

---
 scripts/checkstack.pl | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
scripts/checkstack.pl +1 -1
index 122aef5e4e14..371bd17a4983 100755
@@ -46,7 +46,7 @@ my (@stack, $re, $dre, $x, $xs, $funcre);
 	$x	= "[0-9a-f]";	# hex character
 	$xs	= "[0-9a-f ]";	# hex character or space
 	$funcre = qr/^$x* <(.*)>:$/;
-	if ($arch eq 'aarch64') {
+	if ($arch =~ '^(aarch|arm)64$') {
 		#ffffffc0006325cc:       a9bb7bfd        stp     x29, x30, [sp, #-80]!
 		#a110:       d11643ff        sub     sp, sp, #0x590
 		$re = qr/^.*stp.*sp, \#-([0-9]{1,8})\]\!/o;
Signature · 1 line
2.20.1
author maintainer
#76 lore raw

PATCH 76/121 net: phylink: avoid reducing support mask

In reply to Greg Kroah-Hartman

[ Upstream commit 77316763321ee4050f0576ffd472183aa90dcb30 ]

Avoid reducing the support mask as a result of the interface type selected for SFP modules, or when setting the link settings through ethtool - this should only change when the supported link modes of the hardware combination change.

---
 drivers/net/phy/phylink.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/net/phy/phylink.c +9 -4
index efa31fcda505..611dfc3d89a0 100644
@@ -1080,6 +1080,7 @@ EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_get);
 int phylink_ethtool_ksettings_set(struct phylink *pl,
 				  const struct ethtool_link_ksettings *kset)
 {
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(support);
 	struct ethtool_link_ksettings our_kset;
 	struct phylink_link_state config;
 	int ret;
@@ -1090,11 +1091,12 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
 	    kset->base.autoneg != AUTONEG_ENABLE)
 		return -EINVAL;
 
+	linkmode_copy(support, pl->supported);
 	config = pl->link_config;
 
 	/* Mask out unsupported advertisements */
 	linkmode_and(config.advertising, kset->link_modes.advertising,
-		     pl->supported);
+		     support);
 
 	/* FIXME: should we reject autoneg if phy/mac does not support it? */
 	if (kset->base.autoneg == AUTONEG_DISABLE) {
@@ -1104,7 +1106,7 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
 		 * duplex.
 		 */
 		s = phy_lookup_setting(kset->base.speed, kset->base.duplex,
-				       pl->supported, false);
+				       support, false);
 		if (!s)
 			return -EINVAL;
 
@@ -1133,7 +1135,7 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
 		__set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising);
 	}
 
-	if (phylink_validate(pl, pl->supported, &config))
+	if (phylink_validate(pl, support, &config))
 		return -EINVAL;
 
 	/* If autonegotiation is enabled, we must have an advertisement */
@@ -1583,6 +1585,7 @@ static int phylink_sfp_module_insert(void *upstream,
 {
 	struct phylink *pl = upstream;
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(support1);
 	struct phylink_link_state config;
 	phy_interface_t iface;
 	int ret = 0;
@@ -1610,6 +1613,8 @@ static int phylink_sfp_module_insert(void *upstream,
 		return ret;
 	}
 
+	linkmode_copy(support1, support);
+
 	iface = sfp_select_interface(pl->sfp_bus, id, config.advertising);
 	if (iface == PHY_INTERFACE_MODE_NA) {
 		netdev_err(pl->netdev,
@@ -1619,7 +1624,7 @@ static int phylink_sfp_module_insert(void *upstream,
 	}
 
 	config.interface = iface;
-	ret = phylink_validate(pl, support, &config);
+	ret = phylink_validate(pl, support1, &config);
 	if (ret) {
 		netdev_err(pl->netdev, "validation of %s/%s with support %*pb failed: %d\n",
 			   phylink_an_mode_str(MLO_AN_INBAND),
Signature · 1 line
2.20.1
author maintainer
#77 lore raw

PATCH 77/121 scsi: ufs: Check that space was properly alloced in copy_query_response

In reply to Greg Kroah-Hartman

[ Upstream commit 1c90836f70f9a8ef7b7ad9e1fdd8961903e6ced6 ]

struct ufs_dev_cmd is the main container that supports device management commands. In the case of a read descriptor request, we assume that the proper space was allocated in dev_cmd to hold the returning descriptor.

This is no longer true, as there are flows that doesn't use dev_cmd for device management requests, and was wrong in the first place.

---
 drivers/scsi/ufs/ufshcd.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/scsi/ufs/ufshcd.c +2 -1
index 5ba49c8cd2a3..dbd1f8c253bf 100644
@@ -1917,7 +1917,8 @@ int ufshcd_copy_query_response(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 	memcpy(&query_res->upiu_res, &lrbp->ucd_rsp_ptr->qr, QUERY_OSF_SIZE);
 
 	/* Get the descriptor */
-	if (lrbp->ucd_rsp_ptr->qr.opcode == UPIU_QUERY_OPCODE_READ_DESC) {
+	if (hba->dev_cmd.query.descriptor &&
+	    lrbp->ucd_rsp_ptr->qr.opcode == UPIU_QUERY_OPCODE_READ_DESC) {
 		u8 *descp = (u8 *)lrbp->ucd_rsp_ptr +
 				GENERAL_UPIU_REQUEST_SIZE;
 		u16 resp_len;
Signature · 1 line
2.20.1
author maintainer
#78 lore raw

PATCH 78/121 scsi: smartpqi: unlock on error in pqi_submit_raid_request_synchronous()

In reply to Greg Kroah-Hartman

[ Upstream commit cc8f52609bb4177febade24d11713e20c0893b0a ]

We need to drop the "ctrl_info->sync_request_sem" lock before returning.

Fixes 6c223761eb54 ("smartpqi: initial commit of Microsemi smartpqi driver")
---
 drivers/scsi/smartpqi/smartpqi_init.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/scsi/smartpqi/smartpqi_init.c +4 -2
index 531824afba5f..392695b4691a 100644
@@ -4044,8 +4044,10 @@ static int pqi_submit_raid_request_synchronous(struct pqi_ctrl_info *ctrl_info,
 				return -ETIMEDOUT;
 			msecs_blocked =
 				jiffies_to_msecs(jiffies - start_jiffies);
-			if (msecs_blocked >= timeout_msecs)
-				return -ETIMEDOUT;
+			if (msecs_blocked >= timeout_msecs) {
+				rc = -ETIMEDOUT;
+				goto out;
+			}
 			timeout_msecs -= msecs_blocked;
 		}
 	}
Signature · 1 line
2.20.1
author maintainer
#79 lore raw

PATCH 79/121 net: ipvlan: Fix ipvlan device tso disabled while NETIF_F_IP_CSUM is set

In reply to Greg Kroah-Hartman

[ Upstream commit ceae266bf0ae6564ac16d086bf749a096fa90ded ]

There's some NICs, such as hinic, with NETIF_F_IP_CSUM and NETIF_F_TSO on but NETIF_F_HW_CSUM off. And ipvlan device features will be NETIF_F_TSO on with NETIF_F_IP_CSUM and NETIF_F_IP_CSUM both off as IPVLAN_FEATURES only care about NETIF_F_HW_CSUM. So TSO will be disabled in netdev_fix_features.
For example:
Features for enp129s0f0:
rx-checksumming: on
tx-checksumming: on
tx-checksum-ipv4: on
tx-checksum-ip-generic: off [fixed]
tx-checksum-ipv6: on

Fixes a188222b6ed2 ("net: Rename NETIF_F_ALL_CSUM to NETIF_F_CSUM_MASK")
---
 drivers/net/ipvlan/ipvlan_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ipvlan/ipvlan_main.c +1 -1
index bbeb1623e2d5..717fce6edeb7 100644
@@ -112,7 +112,7 @@ static void ipvlan_port_destroy(struct net_device *dev)
 }
 
 #define IPVLAN_FEATURES \
-	(NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA | NETIF_F_FRAGLIST | \
+	(NETIF_F_SG | NETIF_F_CSUM_MASK | NETIF_F_HIGHDMA | NETIF_F_FRAGLIST | \
 	 NETIF_F_GSO | NETIF_F_TSO | NETIF_F_GSO_ROBUST | \
 	 NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_GRO | NETIF_F_RXCSUM | \
 	 NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_HW_VLAN_STAG_FILTER)
Signature · 1 line
2.20.1
author maintainer
#70 lore raw

PATCH 70/121 drm/arm/mali-dp: Add a loop around the second set CVAL and try 5 times

In reply to Greg Kroah-Hartman

[ Upstream commit 6a88e0c14813d00f8520d0e16cd4136c6cf8b4d4 ]

This patch trying to fix monitor freeze issue caused by drm error 'flip_done timed out' on LS1028A platform. this set try is make a loop around the second setting CVAL and try like 5 times before giveing up.

---
 drivers/gpu/drm/arm/malidp_drv.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
drivers/gpu/drm/arm/malidp_drv.c +12 -1
index ab50ad06e271..64da56f4b0cf 100644
@@ -192,6 +192,7 @@ static void malidp_atomic_commit_hw_done(struct drm_atomic_state *state)
 {
 	struct drm_device *drm = state->dev;
 	struct malidp_drm *malidp = drm->dev_private;
+	int loop = 5;
 
 	malidp->event = malidp->crtc.state->event;
 	malidp->crtc.state->event = NULL;
@@ -206,8 +207,18 @@ static void malidp_atomic_commit_hw_done(struct drm_atomic_state *state)
 			drm_crtc_vblank_get(&malidp->crtc);
 
 		/* only set config_valid if the CRTC is enabled */
-		if (malidp_set_and_wait_config_valid(drm) < 0)
+		if (malidp_set_and_wait_config_valid(drm) < 0) {
+			/*
+			 * make a loop around the second CVAL setting and
+			 * try 5 times before giving up.
+			 */
+			while (loop--) {
+				if (!malidp_set_and_wait_config_valid(drm))
+					break;
+			}
 			DRM_DEBUG_DRIVER("timed out waiting for updated configuration\n");
+		}
+
 	} else if (malidp->event) {
 		/* CRTC inactive means vblank IRQ is disabled, send event directly */
 		spin_lock_irq(&drm->event_lock);
Signature · 1 line
2.20.1
author maintainer
#108 lore raw

PATCH 108/121 binder: fix possible UAF when freeing buffer

In reply to Greg Kroah-Hartman

From: Todd Kjos <[email protected]>

commit a370003cc301d4361bae20c9ef615f89bf8d1e8a upstream.

There is a race between the binder driver cleaning up a completed transaction via binder_free_transaction() and a user calling binder_ioctl(BC_FREE_BUFFER) to release a buffer. It doesn't matter which is first but they need to be protected against running concurrently which can result in a UAF.

---
 drivers/android/binder.c |   16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)
drivers/android/binder.c +14 -2
@@ -1950,8 +1950,18 @@ static void binder_free_txn_fixups(struc
 
 static void binder_free_transaction(struct binder_transaction *t)
 {
-	if (t->buffer)
-		t->buffer->transaction = NULL;
+	struct binder_proc *target_proc = t->to_proc;
+
+	if (target_proc) {
+		binder_inner_proc_lock(target_proc);
+		if (t->buffer)
+			t->buffer->transaction = NULL;
+		binder_inner_proc_unlock(target_proc);
+	}
+	/*
+	 * If the transaction has no target_proc, then
+	 * t->buffer->transaction has already been cleared.
+	 */
 	binder_free_txn_fixups(t);
 	kfree(t);
 	binder_stats_deleted(BINDER_STAT_TRANSACTION);
@@ -3550,10 +3560,12 @@ err_invalid_target_handle:
 static void
 binder_free_buf(struct binder_proc *proc, struct binder_buffer *buffer)
 {
+	binder_inner_proc_lock(proc);
 	if (buffer->transaction) {
 		buffer->transaction->buffer = NULL;
 		buffer->transaction = NULL;
 	}
+	binder_inner_proc_unlock(proc);
 	if (buffer->async_transaction && buffer->target_node) {
 		struct binder_node *buf_node;
 		struct binder_work *w;
author maintainer
#117 lore raw

PATCH 117/121 {nl,mac}80211: allow 4addr AP operation on crypto controlled devices

In reply to Greg Kroah-Hartman

From: Manikanta Pubbisetty <[email protected]>

commit 33d915d9e8ce811d8958915ccd18d71a66c7c495 upstream.

As per the current design, in the case of sw crypto controlled devices, it is the device which advertises the support for AP/VLAN iftype based on it's ability to tranmsit packets encrypted in software (In VLAN functionality, group traffic generated for a specific VLAN group is always encrypted in software). Commit db3bdcb9c3ff ("mac80211: allow AP_VLAN operation on crypto controlled devices") has introduced this change.

Since 4addr AP operation also uses AP/VLAN iftype, this conditional way of advertising AP/VLAN support has broken 4addr AP mode operation on crypto controlled devices which do not support VLAN functionality.

In the case of ath10k driver, not all firmwares have support for VLAN functionality but all can support 4addr AP operation. Because AP/VLAN support is not advertised for these devices, 4addr AP operations are also blocked.

Fix this by allowing 4addr operation on devices which do not support AP/VLAN iftype but can support 4addr AP operation (decision is based on the wiphy flag WIPHY_FLAG_4ADDR_AP).

Fixes db3bdcb9c3ff ("mac80211: allow AP_VLAN operation on crypto controlled devices")
---
 include/net/cfg80211.h |    3 ++-
 net/mac80211/util.c    |    4 +++-
 net/wireless/core.c    |    6 +++++-
 net/wireless/nl80211.c |    8 ++++++--
 4 files changed, 16 insertions(+), 5 deletions(-)
include/net/cfg80211.h +2 -1
@@ -3767,7 +3767,8 @@ struct cfg80211_ops {
  *	on wiphy_new(), but can be changed by the driver if it has a good
  *	reason to override the default
  * @WIPHY_FLAG_4ADDR_AP: supports 4addr mode even on AP (with a single station
- *	on a VLAN interface)
+ *	on a VLAN interface). This flag also serves an extra purpose of
+ *	supporting 4ADDR AP mode on devices which do not support AP/VLAN iftype.
  * @WIPHY_FLAG_4ADDR_STATION: supports 4addr mode even as a station
  * @WIPHY_FLAG_CONTROL_PORT_PROTOCOL: This device supports setting the
  *	control port protocol ethertype. The device also honours the
net/mac80211/util.c +3 -1
@@ -3757,7 +3757,9 @@ int ieee80211_check_combinations(struct
 	}
 
 	/* Always allow software iftypes */
-	if (local->hw.wiphy->software_iftypes & BIT(iftype)) {
+	if (local->hw.wiphy->software_iftypes & BIT(iftype) ||
+	    (iftype == NL80211_IFTYPE_AP_VLAN &&
+	     local->hw.wiphy->flags & WIPHY_FLAG_4ADDR_AP)) {
 		if (radar_detect)
 			return -EINVAL;
 		return 0;
net/wireless/core.c +5 -1
@@ -1396,8 +1396,12 @@ static int cfg80211_netdev_notifier_call
 		}
 		break;
 	case NETDEV_PRE_UP:
-		if (!(wdev->wiphy->interface_modes & BIT(wdev->iftype)))
+		if (!(wdev->wiphy->interface_modes & BIT(wdev->iftype)) &&
+		    !(wdev->iftype == NL80211_IFTYPE_AP_VLAN &&
+		      rdev->wiphy.flags & WIPHY_FLAG_4ADDR_AP &&
+		      wdev->use_4addr))
 			return notifier_from_errno(-EOPNOTSUPP);
+
 		if (rfkill_blocked(rdev->rfkill))
 			return notifier_from_errno(-ERFKILL);
 		break;
net/wireless/nl80211.c +6 -2
@@ -3385,8 +3385,7 @@ static int nl80211_new_interface(struct
 	if (info->attrs[NL80211_ATTR_IFTYPE])
 		type = nla_get_u32(info->attrs[NL80211_ATTR_IFTYPE]);
 
-	if (!rdev->ops->add_virtual_intf ||
-	    !(rdev->wiphy.interface_modes & (1 << type)))
+	if (!rdev->ops->add_virtual_intf)
 		return -EOPNOTSUPP;
 
 	if ((type == NL80211_IFTYPE_P2P_DEVICE || type == NL80211_IFTYPE_NAN ||
@@ -3405,6 +3404,11 @@ static int nl80211_new_interface(struct
 			return err;
 	}
 
+	if (!(rdev->wiphy.interface_modes & (1 << type)) &&
+	    !(type == NL80211_IFTYPE_AP_VLAN && params.use_4addr &&
+	      rdev->wiphy.flags & WIPHY_FLAG_4ADDR_AP))
+		return -EOPNOTSUPP;
+
 	err = nl80211_parse_mon_options(rdev, type, info, &params);
 	if (err < 0)
 		return err;
author maintainer
#118 lore raw

PATCH 118/121 mac80211: handle deauthentication/disassociation from TDLS peer

In reply to Greg Kroah-Hartman

From: Yu Wang <[email protected]>

commit 79c92ca42b5a3e0ea172ea2ce8df8e125af237da upstream.

When receiving a deauthentication/disassociation frame from a TDLS peer, a station should not disconnect the current AP, but only disable the current TDLS link if it's enabled.

Without this change, a TDLS issue can be reproduced by following the steps as below:

1. STA-1 and STA-2 are connected to AP, bidirection traffic is running between STA-1 and STA-2.
2. Set up TDLS link between STA-1 and STA-2, stay for a while, then teardown TDLS link.
3. Repeat step #2 and monitor the connection between STA and AP.

During the test, one STA may send a deauthentication/disassociation frame to another, after TDLS teardown, with reason code 6/7, which
means: Class 2/3 frame received from nonassociated STA.

On receive this frame, the receiver STA will disconnect the current AP and then reconnect. It's not a expected behavior, purpose of this frame should be disabling the TDLS link, not the link with AP.

---
 net/mac80211/ieee80211_i.h |    3 +++
 net/mac80211/mlme.c        |   12 +++++++++++-
 net/mac80211/tdls.c        |   23 +++++++++++++++++++++++
 3 files changed, 37 insertions(+), 1 deletion(-)
net/mac80211/ieee80211_i.h +3 -0
@@ -2222,6 +2222,9 @@ void ieee80211_tdls_cancel_channel_switc
 					  const u8 *addr);
 void ieee80211_teardown_tdls_peers(struct ieee80211_sub_if_data *sdata);
 void ieee80211_tdls_chsw_work(struct work_struct *wk);
+void ieee80211_tdls_handle_disconnect(struct ieee80211_sub_if_data *sdata,
+				      const u8 *peer, u16 reason);
+const char *ieee80211_get_reason_code_string(u16 reason_code);
 
 extern const struct ethtool_ops ieee80211_ethtool_ops;
 
net/mac80211/mlme.c +11 -1
@@ -2963,7 +2963,7 @@ static void ieee80211_rx_mgmt_auth(struc
 #define case_WLAN(type) \
 	case WLAN_REASON_##type: return #type
 
-static const char *ieee80211_get_reason_code_string(u16 reason_code)
+const char *ieee80211_get_reason_code_string(u16 reason_code)
 {
 	switch (reason_code) {
 	case_WLAN(UNSPECIFIED);
@@ -3028,6 +3028,11 @@ static void ieee80211_rx_mgmt_deauth(str
 	if (len < 24 + 2)
 		return;
 
+	if (!ether_addr_equal(mgmt->bssid, mgmt->sa)) {
+		ieee80211_tdls_handle_disconnect(sdata, mgmt->sa, reason_code);
+		return;
+	}
+
 	if (ifmgd->associated &&
 	    ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) {
 		const u8 *bssid = ifmgd->associated->bssid;
@@ -3077,6 +3082,11 @@ static void ieee80211_rx_mgmt_disassoc(s
 
 	reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
 
+	if (!ether_addr_equal(mgmt->bssid, mgmt->sa)) {
+		ieee80211_tdls_handle_disconnect(sdata, mgmt->sa, reason_code);
+		return;
+	}
+
 	sdata_info(sdata, "disassociated from %pM (Reason: %u=%s)\n",
 		   mgmt->sa, reason_code,
 		   ieee80211_get_reason_code_string(reason_code));
net/mac80211/tdls.c +23 -0
@@ -1994,3 +1994,26 @@ void ieee80211_tdls_chsw_work(struct wor
 	}
 	rtnl_unlock();
 }
+
+void ieee80211_tdls_handle_disconnect(struct ieee80211_sub_if_data *sdata,
+				      const u8 *peer, u16 reason)
+{
+	struct ieee80211_sta *sta;
+
+	rcu_read_lock();
+	sta = ieee80211_find_sta(&sdata->vif, peer);
+	if (!sta || !sta->tdls) {
+		rcu_read_unlock();
+		return;
+	}
+	rcu_read_unlock();
+
+	tdls_dbg(sdata, "disconnected from TDLS peer %pM (Reason: %u=%s)\n",
+		 peer, reason,
+		 ieee80211_get_reason_code_string(reason));
+
+	ieee80211_tdls_oper_request(&sdata->vif, peer,
+				    NL80211_TDLS_TEARDOWN,
+				    WLAN_REASON_TDLS_TEARDOWN_UNREACHABLE,
+				    GFP_ATOMIC);
+}
author maintainer
#119 lore raw

PATCH 119/121 nl80211: fix station_info pertid memory leak

In reply to Greg Kroah-Hartman

From: Andy Strohman <[email protected]>

commit f77bf4863dc2218362f4227d56af4a5f3f08830c upstream.

When dumping stations, memory allocated for station_info's pertid member will leak if the nl80211 header cannot be added to the sk_buff due to insufficient tail room.

I noticed this leak in the kmalloc-2048 cache.

Fixes 8689c051a201 ("cfg80211: dynamically allocate per-tid stats for station info")
---
 net/wireless/nl80211.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
net/wireless/nl80211.c +3 -1
@@ -4804,8 +4804,10 @@ static int nl80211_send_station(struct s
 	struct nlattr *sinfoattr, *bss_param;
 
 	hdr = nl80211hdr_put(msg, portid, seq, flags, cmd);
-	if (!hdr)
+	if (!hdr) {
+		cfg80211_sinfo_release_content(sinfo);
 		return -1;
+	}
 
 	if (nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex) ||
 	    nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, mac_addr) ||
author maintainer
#120 lore raw

PATCH 120/121 mac80211: Do not use stack memory with scatterlist for GMAC

In reply to Greg Kroah-Hartman

From: Jouni Malinen <[email protected]>

commit a71fd9dac23613d96ba3c05619a8ef4fd6cdf9b9 upstream.

ieee80211_aes_gmac() uses the mic argument directly in sg_set_buf() and that does not allow use of stack memory (e.g., BUG_ON() is hit in sg_set_buf() with CONFIG_DEBUG_SG). BIP GMAC TX side is fine for this since it can use the skb data buffer, but the RX side was using a stack variable for deriving the local MIC value to compare against the received one.

Fix this by allocating heap memory for the mic buffer.

This was found with hwsim test case ap_cipher_bip_gmac_128 hitting that BUG_ON() and kernel panic.

---
 net/mac80211/wpa.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
net/mac80211/wpa.c +6 -1
@@ -1175,7 +1175,7 @@ ieee80211_crypto_aes_gmac_decrypt(struct
 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
 	struct ieee80211_key *key = rx->key;
 	struct ieee80211_mmie_16 *mmie;
-	u8 aad[GMAC_AAD_LEN], mic[GMAC_MIC_LEN], ipn[6], nonce[GMAC_NONCE_LEN];
+	u8 aad[GMAC_AAD_LEN], *mic, ipn[6], nonce[GMAC_NONCE_LEN];
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 
 	if (!ieee80211_is_mgmt(hdr->frame_control))
@@ -1206,13 +1206,18 @@ ieee80211_crypto_aes_gmac_decrypt(struct
 		memcpy(nonce, hdr->addr2, ETH_ALEN);
 		memcpy(nonce + ETH_ALEN, ipn, 6);
 
+		mic = kmalloc(GMAC_MIC_LEN, GFP_ATOMIC);
+		if (!mic)
+			return RX_DROP_UNUSABLE;
 		if (ieee80211_aes_gmac(key->u.aes_gmac.tfm, aad, nonce,
 				       skb->data + 24, skb->len - 24,
 				       mic) < 0 ||
 		    crypto_memneq(mic, mmie->mic, sizeof(mmie->mic))) {
 			key->u.aes_gmac.icverrors++;
+			kfree(mic);
 			return RX_DROP_UNUSABLE;
 		}
+		kfree(mic);
 	}
 
 	memcpy(key->u.aes_gmac.rx_pn, ipn, 6);
author maintainer
#121 lore raw

PATCH 121/121 x86/resctrl: Dont stop walking closids when a locksetup group is found

In reply to Greg Kroah-Hartman

From: James Morse <[email protected]>

commit 87d3aa28f345bea77c396855fa5d5fec4c24461f upstream.

When a new control group is created __init_one_rdt_domain() walks all the other closids to calculate the sets of used and unused bits.

If it discovers a pseudo_locksetup group, it breaks out of the loop. This means any later closid doesn't get its used bits added to used_b. These bits will then get set in unused_b, and added to the new control group's configuration, even if they were marked as exclusive for a later closid.

When encountering a pseudo_locksetup group, we should continue. This is because "a resource group enters 'pseudo-locked' mode after the schemata is written while the resource group is in 'pseudo-locksetup' mode." When we find a pseudo_locksetup group, its configuration is expected to be overwritten, we can skip it.

Fixes dfe9674b04ff6 ("x86/intel_rdt: Enable entering of pseudo-locksetup mode")
Cc Fenghua Yu <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc H Peter Avin <[email protected]>
[Dropped comment due to lack of space]
---
 arch/x86/kernel/cpu/resctrl/rdtgroup.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kernel/cpu/resctrl/rdtgroup.c +1 -1
@@ -2556,7 +2556,7 @@ static int rdtgroup_init_alloc(struct rd
 				if (closid_allocated(i) && i != closid) {
 					mode = rdtgroup_mode_by_closid(i);
 					if (mode == RDT_MODE_PSEUDO_LOCKSETUP)
-						break;
+						continue;
 					/*
 					 * If CDP is active include peer
 					 * domain's usage to ensure there
author maintainer
#109 lore raw

PATCH 109/121 staging: erofs: add requirements field in superblock

In reply to Greg Kroah-Hartman

From: Gao Xiang <[email protected]>

commit 5efe5137f05bbb4688890620934538c005e7d1d6 upstream.

There are some backward incompatible features pending for months, mainly due to on-disk format expensions.

However, we should ensure that it cannot be mounted with old kernels. Otherwise, it will causes unexpected behaviors.

Fixes ba2b77a82022 ("staging: erofs: add super block operations")
Cc <[email protected]> # 4.19+
---
 drivers/staging/erofs/erofs_fs.h |   13 ++++++++++---
 drivers/staging/erofs/internal.h |    2 ++
 drivers/staging/erofs/super.c    |   19 +++++++++++++++++++
 3 files changed, 31 insertions(+), 3 deletions(-)
drivers/staging/erofs/erofs_fs.h +10 -3
@@ -17,10 +17,16 @@
 #define EROFS_SUPER_MAGIC_V1    0xE0F5E1E2
 #define EROFS_SUPER_OFFSET      1024
 
+/*
+ * Any bits that aren't in EROFS_ALL_REQUIREMENTS should be
+ * incompatible with this kernel version.
+ */
+#define EROFS_ALL_REQUIREMENTS  0
+
 struct erofs_super_block {
 /*  0 */__le32 magic;           /* in the little endian */
 /*  4 */__le32 checksum;        /* crc32c(super_block) */
-/*  8 */__le32 features;
+/*  8 */__le32 features;        /* (aka. feature_compat) */
 /* 12 */__u8 blkszbits;         /* support block_size == PAGE_SIZE only */
 /* 13 */__u8 reserved;
 
@@ -34,9 +40,10 @@ struct erofs_super_block {
 /* 44 */__le32 xattr_blkaddr;
 /* 48 */__u8 uuid[16];          /* 128-bit uuid for volume */
 /* 64 */__u8 volume_name[16];   /* volume name */
+/* 80 */__le32 requirements;    /* (aka. feature_incompat) */
 
-/* 80 */__u8 reserved2[48];     /* 128 bytes */
-} __packed;
+/* 84 */__u8 reserved2[44];
+} __packed;                     /* 128 bytes */
 
 /*
  * erofs inode data mapping:
drivers/staging/erofs/internal.h +2 -0
@@ -114,6 +114,8 @@ struct erofs_sb_info {
 
 	u8 uuid[16];                    /* 128-bit uuid for volume */
 	u8 volume_name[16];             /* volume name */
+	u32 requirements;
+
 	char *dev_name;
 
 	unsigned int mount_opt;
drivers/staging/erofs/super.c +19 -0
@@ -76,6 +76,22 @@ static void destroy_inode(struct inode *
 	call_rcu(&inode->i_rcu, i_callback);
 }
 
+static bool check_layout_compatibility(struct super_block *sb,
+				       struct erofs_super_block *layout)
+{
+	const unsigned int requirements = le32_to_cpu(layout->requirements);
+
+	EROFS_SB(sb)->requirements = requirements;
+
+	/* check if current kernel meets all mandatory requirements */
+	if (requirements & (~EROFS_ALL_REQUIREMENTS)) {
+		errln("unidentified requirements %x, please upgrade kernel version",
+		      requirements & ~EROFS_ALL_REQUIREMENTS);
+		return false;
+	}
+	return true;
+}
+
 static int superblock_read(struct super_block *sb)
 {
 	struct erofs_sb_info *sbi;
@@ -109,6 +125,9 @@ static int superblock_read(struct super_
 		goto out;
 	}
 
+	if (!check_layout_compatibility(sb, layout))
+		goto out;
+
 	sbi->blocks = le32_to_cpu(layout->blocks);
 	sbi->meta_blkaddr = le32_to_cpu(layout->meta_blkaddr);
 #ifdef CONFIG_EROFS_FS_XATTR
author maintainer
#111 lore raw

PATCH 111/121 Bluetooth: Fix regression with minimum encryption key size alignment

In reply to Greg Kroah-Hartman

From: Marcel Holtmann <[email protected]>

commit 693cd8ce3f882524a5d06f7800dd8492411877b3 upstream.

When trying to align the minimum encryption key size requirement for Bluetooth connections, it turns out doing this in a central location in the HCI connection handling code is not possible.

Original Bluetooth version up to 2.0 used a security model where the L2CAP service would enforce authentication and encryption. Starting with Bluetooth 2.1 and Secure Simple Pairing that model has changed into that the connection initiator is responsible for providing an encrypted ACL link before any L2CAP communication can happen.

Now connecting Bluetooth 2.1 or later devices with Bluetooth 2.0 and before devices are causing a regression. The encryption key size check needs to be moved out of the HCI connection handling into the L2CAP channel setup.

To achieve this, the current check inside hci_conn_security() has been moved into l2cap_check_enc_key_size() helper function and then called from four decisions point inside L2CAP to cover all combinations of Secure Simple Pairing enabled devices and device using legacy pairing and legacy service security model.

Fixes d5bb334a8e17 ("Bluetooth: Align minimum encryption key size for LE and BR/EDR connections")

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203643

---
 net/bluetooth/hci_conn.c   |   18 +++++++++---------
 net/bluetooth/l2cap_core.c |   33 ++++++++++++++++++++++++++++-----
 2 files changed, 37 insertions(+), 14 deletions(-)
net/bluetooth/hci_conn.c +9 -9
@@ -1276,14 +1276,6 @@ int hci_conn_check_link_mode(struct hci_
 	    !test_bit(HCI_CONN_ENCRYPT, &conn->flags))
 		return 0;
 
-	/* The minimum encryption key size needs to be enforced by the
-	 * host stack before establishing any L2CAP connections. The
-	 * specification in theory allows a minimum of 1, but to align
-	 * BR/EDR and LE transports, a minimum of 7 is chosen.
-	 */
-	if (conn->enc_key_size < HCI_MIN_ENC_KEY_SIZE)
-		return 0;
-
 	return 1;
 }
 
@@ -1400,8 +1392,16 @@ auth:
 		return 0;
 
 encrypt:
-	if (test_bit(HCI_CONN_ENCRYPT, &conn->flags))
+	if (test_bit(HCI_CONN_ENCRYPT, &conn->flags)) {
+		/* Ensure that the encryption key size has been read,
+		 * otherwise stall the upper layer responses.
+		 */
+		if (!conn->enc_key_size)
+			return 0;
+
+		/* Nothing else needed, all requirements are met */
 		return 1;
+	}
 
 	hci_conn_encrypt(conn);
 	return 0;
net/bluetooth/l2cap_core.c +28 -5
@@ -1341,6 +1341,21 @@ static void l2cap_request_info(struct l2
 		       sizeof(req), &req);
 }
 
+static bool l2cap_check_enc_key_size(struct hci_conn *hcon)
+{
+	/* The minimum encryption key size needs to be enforced by the
+	 * host stack before establishing any L2CAP connections. The
+	 * specification in theory allows a minimum of 1, but to align
+	 * BR/EDR and LE transports, a minimum of 7 is chosen.
+	 *
+	 * This check might also be called for unencrypted connections
+	 * that have no key size requirements. Ensure that the link is
+	 * actually encrypted before enforcing a key size.
+	 */
+	return (!test_bit(HCI_CONN_ENCRYPT, &hcon->flags) ||
+		hcon->enc_key_size > HCI_MIN_ENC_KEY_SIZE);
+}
+
 static void l2cap_do_start(struct l2cap_chan *chan)
 {
 	struct l2cap_conn *conn = chan->conn;
@@ -1358,9 +1373,14 @@ static void l2cap_do_start(struct l2cap_
 	if (!(conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_DONE))
 		return;
 
-	if (l2cap_chan_check_security(chan, true) &&
-	    __l2cap_no_conn_pending(chan))
+	if (!l2cap_chan_check_security(chan, true) ||
+	    !__l2cap_no_conn_pending(chan))
+		return;
+
+	if (l2cap_check_enc_key_size(conn->hcon))
 		l2cap_start_connection(chan);
+	else
+		__set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
 }
 
 static inline int l2cap_mode_supported(__u8 mode, __u32 feat_mask)
@@ -1439,7 +1459,10 @@ static void l2cap_conn_start(struct l2ca
 				continue;
 			}
 
-			l2cap_start_connection(chan);
+			if (l2cap_check_enc_key_size(conn->hcon))
+				l2cap_start_connection(chan);
+			else
+				l2cap_chan_close(chan, ECONNREFUSED);
 
 		} else if (chan->state == BT_CONNECT2) {
 			struct l2cap_conn_rsp rsp;
@@ -7490,7 +7513,7 @@ static void l2cap_security_cfm(struct hc
 		}
 
 		if (chan->state == BT_CONNECT) {
-			if (!status)
+			if (!status && l2cap_check_enc_key_size(hcon))
 				l2cap_start_connection(chan);
 			else
 				__set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
@@ -7499,7 +7522,7 @@ static void l2cap_security_cfm(struct hc
 			struct l2cap_conn_rsp rsp;
 			__u16 res, stat;
 
-			if (!status) {
+			if (!status && l2cap_check_enc_key_size(hcon)) {
 				if (test_bit(FLAG_DEFER_SETUP, &chan->flags)) {
 					res = L2CAP_CR_PEND;
 					stat = L2CAP_CS_AUTHOR_PEND;
author maintainer
#110 lore raw

PATCH 110/121 Bluetooth: Align minimum encryption key size for LE and BR/EDR connections

In reply to Greg Kroah-Hartman

From: Marcel Holtmann <[email protected]>

commit d5bb334a8e171b262e48f378bd2096c0ea458265 upstream.

The minimum encryption key size for LE connections is 56 bits and to align LE with BR/EDR, enforce 56 bits of minimum encryption key size for BR/EDR connections as well.

---
 include/net/bluetooth/hci_core.h |    3 +++
 net/bluetooth/hci_conn.c         |    8 ++++++++
 2 files changed, 11 insertions(+)
include/net/bluetooth/hci_core.h +3 -0
@@ -190,6 +190,9 @@ struct adv_info {
 
 #define HCI_MAX_SHORT_NAME_LENGTH	10
 
+/* Min encryption key size to match with SMP */
+#define HCI_MIN_ENC_KEY_SIZE		7
+
 /* Default LE RPA expiry time, 15 minutes */
 #define HCI_DEFAULT_RPA_TIMEOUT		(15 * 60)
 
net/bluetooth/hci_conn.c +8 -0
@@ -1276,6 +1276,14 @@ int hci_conn_check_link_mode(struct hci_
 	    !test_bit(HCI_CONN_ENCRYPT, &conn->flags))
 		return 0;
 
+	/* The minimum encryption key size needs to be enforced by the
+	 * host stack before establishing any L2CAP connections. The
+	 * specification in theory allows a minimum of 1, but to align
+	 * BR/EDR and LE transports, a minimum of 7 is chosen.
+	 */
+	if (conn->enc_key_size < HCI_MIN_ENC_KEY_SIZE)
+		return 0;
+
 	return 1;
 }
 
author maintainer
#112 lore raw

PATCH 112/121 SMB3: retry on STATUS_INSUFFICIENT_RESOURCES instead of failing write

In reply to Greg Kroah-Hartman

From: Steve French <[email protected]>

commit 8d526d62db907e786fd88948c75d1833d82bd80e upstream.

Some servers such as Windows 10 will return STATUS_INSUFFICIENT_RESOURCES as the number of simultaneous SMB3 requests grows (even though the client has sufficient credits). Return EAGAIN on STATUS_INSUFFICIENT_RESOURCES so that we can retry writes which fail with this status code.

This (for example) fixes large file copies to Windows 10 on fast networks.

---
 fs/cifs/smb2maperror.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/cifs/smb2maperror.c +1 -1
@@ -457,7 +457,7 @@ static const struct status_to_posix_erro
 	{STATUS_FILE_INVALID, -EIO, "STATUS_FILE_INVALID"},
 	{STATUS_ALLOTTED_SPACE_EXCEEDED, -EIO,
 	"STATUS_ALLOTTED_SPACE_EXCEEDED"},
-	{STATUS_INSUFFICIENT_RESOURCES, -EREMOTEIO,
+	{STATUS_INSUFFICIENT_RESOURCES, -EAGAIN,
 				"STATUS_INSUFFICIENT_RESOURCES"},
 	{STATUS_DFS_EXIT_PATH_FOUND, -EIO, "STATUS_DFS_EXIT_PATH_FOUND"},
 	{STATUS_DEVICE_DATA_ERROR, -EIO, "STATUS_DEVICE_DATA_ERROR"},
author maintainer
#115 lore raw

PATCH 115/121 cfg80211: fix memory leak of wiphy device name

In reply to Greg Kroah-Hartman

From: Eric Biggers <[email protected]>

commit 4f488fbca2a86cc7714a128952eead92cac279ab upstream.

In wiphy_new_nm(), if an error occurs after dev_set_name() and device_initialize() have already been called, it's necessary to call put_device() (via wiphy_free()) to avoid a memory leak.

Reported-by [email protected]
Fixes 1f87f7d3a3b4 ("cfg80211: add rfkill support")
---
 net/wireless/core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/wireless/core.c +1 -1
@@ -513,7 +513,7 @@ use_default_name:
 				   &rdev->rfkill_ops, rdev);
 
 	if (!rdev->rfkill) {
-		kfree(rdev);
+		wiphy_free(&rdev->wiphy);
 		return NULL;
 	}
 
author maintainer
#107 lore raw

PATCH 107/121 drm/i915: Dont clobber M/N values during fastset check

In reply to Greg Kroah-Hartman

From: Ville Syrjälä <[email protected]>

commit 475df5d0f3eb2d031e4505f84d8fba75baaf2e80 upstream.

We're now calling intel_pipe_config_compare(..., true) uncoditionally which means we're always going clobber the calculated M/N values with the old values if the fuzzy M/N check passes. That causes problems because the fuzzy check allows for a huge difference in the values.

I'm actually tempted to just make the M/N checks exact, but that might prevent fastboot from kicking in when people want it. So for now let's overwrite the computed values with the old values only if decide to skip the modeset.

v2: Copy has_drrs along with M/N M2/N2 values

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110782
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110675

Fixes d19f958db23c ("drm/i915: Enable fastset for non-boot modesets.")
(cherry picked from commit f0521558a2a89d58a08745e225025d338572e60a)
---
 drivers/gpu/drm/i915/intel_display.c |   38 ++++++++++++++++++++++++++---------
 1 file changed, 29 insertions(+), 9 deletions(-)
drivers/gpu/drm/i915/intel_display.c +29 -9
@@ -11820,9 +11820,6 @@ intel_compare_link_m_n(const struct inte
 			      m2_n2->gmch_m, m2_n2->gmch_n, !adjust) &&
 	    intel_compare_m_n(m_n->link_m, m_n->link_n,
 			      m2_n2->link_m, m2_n2->link_n, !adjust)) {
-		if (adjust)
-			*m2_n2 = *m_n;
-
 		return true;
 	}
 
@@ -12855,6 +12852,33 @@ static int calc_watermark_data(struct in
 	return 0;
 }
 
+static void intel_crtc_check_fastset(struct intel_crtc_state *old_crtc_state,
+				     struct intel_crtc_state *new_crtc_state)
+{
+	struct drm_i915_private *dev_priv =
+		to_i915(new_crtc_state->base.crtc->dev);
+
+	if (!intel_pipe_config_compare(dev_priv, old_crtc_state,
+				       new_crtc_state, true))
+		return;
+
+	new_crtc_state->base.mode_changed = false;
+	new_crtc_state->update_pipe = true;
+
+	/*
+	 * If we're not doing the full modeset we want to
+	 * keep the current M/N values as they may be
+	 * sufficiently different to the computed values
+	 * to cause problems.
+	 *
+	 * FIXME: should really copy more fuzzy state here
+	 */
+	new_crtc_state->fdi_m_n = old_crtc_state->fdi_m_n;
+	new_crtc_state->dp_m_n = old_crtc_state->dp_m_n;
+	new_crtc_state->dp_m2_n2 = old_crtc_state->dp_m2_n2;
+	new_crtc_state->has_drrs = old_crtc_state->has_drrs;
+}
+
 /**
  * intel_atomic_check - validate state object
  * @dev: drm device
@@ -12903,12 +12927,8 @@ static int intel_atomic_check(struct drm
 			return ret;
 		}
 
-		if (intel_pipe_config_compare(dev_priv,
-					to_intel_crtc_state(old_crtc_state),
-					pipe_config, true)) {
-			crtc_state->mode_changed = false;
-			pipe_config->update_pipe = true;
-		}
+		intel_crtc_check_fastset(to_intel_crtc_state(old_crtc_state),
+					 pipe_config);
 
 		if (needs_modeset(crtc_state))
 			any_ms = true;
author maintainer
#116 lore raw

PATCH 116/121 mac80211: drop robust management frames from unknown TA

In reply to Greg Kroah-Hartman

From: Johannes Berg <[email protected]>

commit 588f7d39b3592a36fb7702ae3b8bdd9be4621e2f upstream.

When receiving a robust management frame, drop it if we don't have rx->sta since then we don't have a security association and thus couldn't possibly validate the frame.

---
 net/mac80211/rx.c |    2 ++
 1 file changed, 2 insertions(+)
net/mac80211/rx.c +2 -0
@@ -3823,6 +3823,8 @@ static bool ieee80211_accept_frame(struc
 	case NL80211_IFTYPE_STATION:
 		if (!bssid && !sdata->u.mgd.use_4addr)
 			return false;
+		if (ieee80211_is_robust_mgmt_frame(skb) && !rx->sta)
+			return false;
 		if (multicast)
 			return true;
 		return ether_addr_equal(sdata->vif.addr, hdr->addr1);
author maintainer
#113 lore raw

PATCH 113/121 x86/vdso: Prevent segfaults due to hoisted vclock reads

In reply to Greg Kroah-Hartman

From: Andy Lutomirski <[email protected]>

commit ff17bbe0bb405ad8b36e55815d381841f9fdeebc upstream.

GCC 5.5.0 sometimes cleverly hoists reads of the pvclock and/or hvclock pages before the vclock mode checks. This creates a path through vclock_gettime() in which no vclock is enabled at all (due to disabled TSC on old CPUs, for example) but the pvclock or hvclock page nevertheless read. This will segfault on bare metal.

This fixes commit 459e3a21535a ("gcc-9: properly declare the {pv,hv}clock_page storage") in the sense that, before that commit, GCC didn't seem to generate the offending code. There was nothing wrong with that commit per se, and -stable maintainers should backport this to all supported kernels regardless of whether the offending commit was present, since the same crash could just as easily be triggered by the phase of the moon.

On GCC 9.1.1, this doesn't seem to affect the generated code at all, so I'm not too concerned about performance regressions from this fix.

---
 arch/x86/entry/vdso/vclock_gettime.c |   15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)
arch/x86/entry/vdso/vclock_gettime.c +13 -2
@@ -128,13 +128,24 @@ notrace static inline u64 vgetcyc(int mo
 {
 	if (mode == VCLOCK_TSC)
 		return (u64)rdtsc_ordered();
+
+	/*
+	 * For any memory-mapped vclock type, we need to make sure that gcc
+	 * doesn't cleverly hoist a load before the mode check.  Otherwise we
+	 * might end up touching the memory-mapped page even if the vclock in
+	 * question isn't enabled, which will segfault.  Hence the barriers.
+	 */
 #ifdef CONFIG_PARAVIRT_CLOCK
-	else if (mode == VCLOCK_PVCLOCK)
+	if (mode == VCLOCK_PVCLOCK) {
+		barrier();
 		return vread_pvclock();
+	}
 #endif
 #ifdef CONFIG_HYPERV_TSCPAGE
-	else if (mode == VCLOCK_HVCLOCK)
+	if (mode == VCLOCK_HVCLOCK) {
+		barrier();
 		return vread_hvclock();
+	}
 #endif
 	return U64_MAX;
 }
author maintainer
#114 lore raw

PATCH 114/121 fs/namespace: fix unprivileged mount propagation

In reply to Greg Kroah-Hartman

From: Christian Brauner <[email protected]>

commit d728cf79164bb38e9628d15276e636539f857ef1 upstream.

When propagating mounts across mount namespaces owned by different user namespaces it is not possible anymore to move or umount the mount in the less privileged mount namespace.

Here is a reproducer:

  sudo mount -t tmpfs tmpfs /mnt
  sudo --make-rshared /mnt

  # create unprivileged user + mount namespace and preserve propagation
  unshare -U -m --map-root --propagation=unchanged
  # now change back to the original mount namespace in another terminal:
  sudo mkdir /mnt/aaa
  sudo mount -t tmpfs tmpfs /mnt/aaa
  # now in the unprivileged user + mount namespace
  mount --move /mnt/aaa /opt

Unfortunately, this is a pretty big deal for userspace since this is e.g. used to inject mounts into running unprivileged containers. So this regression really needs to go away rather quickly.

The problem is that a recent change falsely locked the root of the newly added mounts by setting MNT_LOCKED. Fix this by only locking the mounts on copy_mnt_ns() and not when adding a new mount.

Fixes 3bd045cc9c4b ("separate copying and locking mount tree on cross-userns copies")
Cc Linus Torvalds <[email protected]>
Cc Al Viro <[email protected]>
---
 fs/namespace.c |    1 +
 fs/pnode.c     |    1 -
 2 files changed, 1 insertion(+), 1 deletion(-)
fs/namespace.c +1 -0
@@ -2079,6 +2079,7 @@ static int attach_recursive_mnt(struct m
 		/* Notice when we are propagating across user namespaces */
 		if (child->mnt_parent->mnt_ns->user_ns != user_ns)
 			lock_mnt_tree(child);
+		child->mnt.mnt_flags &= ~MNT_LOCKED;
 		commit_tree(child);
 	}
 	put_mountpoint(smp);
fs/pnode.c +0 -1
@@ -262,7 +262,6 @@ static int propagate_one(struct mount *m
 	child = copy_tree(last_source, last_source->mnt.mnt_root, type);
 	if (IS_ERR(child))
 		return PTR_ERR(child);
-	child->mnt.mnt_flags &= ~MNT_LOCKED;
 	mnt_set_mountpoint(m, mp, child);
 	last_dest = m;
 	last_source = child;
maintainer
#122 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.1.15 release. There are 121 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 26 Jun 2019 09:22:03 AM UTC. Anything received after that time might be too late.

Early feedback:

Building nds32:allmodconfig ... failed
--------------
Error log:
arch/nds32/math-emu/fpuemu.c: In function 'fpu_emu':
arch/nds32/math-emu/fpuemu.c:308:48: error: 'FPCSR_mskALLE_NO_UDFE' undeclared (first use in this function); did you mean 'FPCSR_mskALLE_NO_UDF_IEXE'?
if (((fpu_reg->fpcsr << 5) & fpu_reg->fpcsr & FPCSR_mskALLE_NO_UDFE) ||

                                                ^~~~~~~~~~~~~~~~~~~~~
                                                FPCSR_mskALLE_NO_UDF_IEXE
arch/nds32/math-emu/fpuemu.c:308:48: note: each undeclared identifier is reported only once for each function it appears in
arch/nds32/math-emu/fpuemu.c:309:52: error: 'struct fpu_struct' has no member named 'UDF_trap'; did you mean 'UDF_IEX_trap'?
      ((fpu_reg->fpcsr & FPCSR_mskUDF) && (fpu_reg->UDF_trap)))
                                                    ^~~~~~~~
                                                    UDF_IEX_trap

Guenter

#124 lore raw
In reply to Greg Kroah-Hartman
stable-rc/linux-5.1.y boot: 128 boots: 3 failed, 118 passed with 7 offline (v5.1.14-122-gd74a88068af9)

stable-rc/linux-5.1.y boot: 128 boots: 3 failed, 118 passed with 7 offline (v5.1.14-122-gd74a88068af9)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-5.1.y/kernel/v5.1.14-122-gd74a88068af9/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-5.1.y/kernel/v5.1.14-122-gd74a88068af9/

Tree: stable-rc
Branch: linux-5.1.y
Git Describe: v5.1.14-122-gd74a88068af9
Git Commit: d74a88068af93d3fb0042f1af40244e76cb49dc4
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 73 unique boards, 24 SoC families, 15 builds out of 209

Boot Regressions Detected:

arm64:

    defconfig:
        gcc-8:
          meson-gxl-s905x-khadas-vim:
              lab-baylibre: failing since 1 day (last pass: v5.1.14-13-gb8258e6be3bb - first fail: v5.1.14-13-g5c276064ec4a)
          rk3399-firefly:
              lab-baylibre-seattle: new failure (last pass: v5.1.14-13-g5c276064ec4a)

Boot Failures Detected:

arm:

    multi_v7_defconfig:
        gcc-8:
            bcm4708-smartrg-sr400ac: 1 failed lab

arm64:
defconfig:
gcc-8:
meson-gxl-s905x-khadas-vim: 1 failed lab
rk3399-firefly: 1 failed lab

Offline Platforms:

arm:

    qcom_defconfig:
        gcc-8
            qcom-apq8064-cm-qs600: 1 offline lab
            qcom-apq8064-ifc6410: 1 offline lab

    sunxi_defconfig:
        gcc-8
            sun5i-r8-chip: 1 offline lab

    multi_v7_defconfig:
        gcc-8
            qcom-apq8064-cm-qs600: 1 offline lab
            qcom-apq8064-ifc6410: 1 offline lab
            sun5i-r8-chip: 1 offline lab

arm64:

    defconfig:
        gcc-8
            apq8016-sbc: 1 offline lab

---
For more info write to <[email protected]>

author maintainer
#123 lore raw
In reply to Guenter Roeck
Quoted 18 lines · Guenter Roeck
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.1.15 release. There are 121 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 26 Jun 2019 09:22:03 AM UTC. Anything received after that time might be too late.

Early feedback:

Building nds32:allmodconfig ... failed
--------------
Error log:
arch/nds32/math-emu/fpuemu.c: In function 'fpu_emu':
arch/nds32/math-emu/fpuemu.c:308:48: error: 'FPCSR_mskALLE_NO_UDFE' undeclared (first use in this function); did you mean 'FPCSR_mskALLE_NO_UDF_IEXE'?
if (((fpu_reg->fpcsr << 5) & fpu_reg->fpcsr & FPCSR_mskALLE_NO_UDFE) ||

Quoted 7 lines
                                                ^~~~~~~~~~~~~~~~~~~~~
                                                FPCSR_mskALLE_NO_UDF_IEXE
arch/nds32/math-emu/fpuemu.c:308:48: note: each undeclared identifier is reported only once for each function it appears in
arch/nds32/math-emu/fpuemu.c:309:52: error: 'struct fpu_struct' has no member named 'UDF_trap'; did you mean 'UDF_IEX_trap'?
      ((fpu_reg->fpcsr & FPCSR_mskUDF) && (fpu_reg->UDF_trap)))
                                                    ^~~~~~~~
                                                    UDF_IEX_trap

Now dropped nds32 patch that caused this, and pushed out an -rc2 release.

thanks

greg k-h

#125 lore raw
In reply to Greg Kroah-Hartman
Quoted 14 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.1.15 release. There are 121 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 26 Jun 2019 09:22:03 AM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.15-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
and the diffstat can be found below.

Quoted 5 lines

thanks,

greg k-h

-------------

Hello,

Compiled and booted fine. No regressions on x86_64.

THX

Jiunn

maintainer
#127 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.1.15 release. There are 121 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 26 Jun 2019 09:22:03 AM UTC. Anything received after that time might be too late.

For v5.1.14-122-g815c105311e8:

Build results:

	total: 159 pass: 159 fail: 0
Qemu test results:
	total: 364 pass: 364 fail: 0

Guenter

#129 lore raw
In reply to Greg Kroah-Hartman
Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.1.15 release. There are 121 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 26 Jun 2019 09:22:03 AM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.15-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
and the diffstat can be found below.

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 5.1.15-rc2
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.1.y
git commit: 815c105311e8cdba0f84293235f6f043152808cd
git describe: v5.1.14-122-g815c105311e8
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.1-oe/build/v5.1.14-122-g815c105311e8

No regressions (compared to build v5.1.14)

No fixes (compared to build v5.1.14)

Ran 24427 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libgpiod
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* ltp-fs-tests
* network-basic-tests
* ltp-open-posix-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

Signature · 2 lines
Linaro LKFT
https://lkft.linaro.org
author maintainer
#126 lore raw
In reply to Jiunn Chang
Quoted 17 lines · Jiunn Chang
Quoted 16 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.1.15 release. There are 121 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 26 Jun 2019 09:22:03 AM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.15-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
and the diffstat can be found below.

thanks,

Quoted 7 lines
Quoted 3 lines

greg k-h

-------------

Hello,

Compiled and booted fine. No regressions on x86_64.

Great, thanks for letting me know!

greg k-h

author maintainer
#128 lore raw
In reply to Guenter Roeck
Quoted 10 lines · Guenter Roeck
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.1.15 release. There are 121 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 26 Jun 2019 09:22:03 AM UTC. Anything received after that time might be too late.

Quoted 6 lines

For v5.1.14-122-g815c105311e8:

Build results:

	total: 159 pass: 159 fail: 0
Qemu test results:
	total: 364 pass: 364 fail: 0

Great! Thanks for testing these and letting me know.

greg k-h

author maintainer
#130 lore raw
In reply to Naresh Kamboju
Quoted 17 lines · Naresh Kamboju
Quoted 15 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.1.15 release. There are 121 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 26 Jun 2019 09:22:03 AM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

        https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.15-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
and the diffstat can be found below.

Quoted 6 lines
Quoted 3 lines

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

thanks for testing and letting me know.

greg k-h

maintainer
#131 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.1.15 release. There are 121 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 26 Jun 2019 09:22:03 AM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.15-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
and the diffstat can be found below.

thanks,

greg k-h

All tests passing for Tegra ...

Test results for stable-v5.1:

    12 builds:	12 pass, 0 fail
    22 boots:	22 pass, 0 fail
    32 tests:	32 pass, 0 fail

Linux version: 5.1.15-rc1-gd74a88068af9
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

Signature · 1 line
nvpublic
author maintainer
#132 lore raw
Quoted 23 lines · Jon Hunter
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.1.15 release. There are 121 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 26 Jun 2019 09:22:03 AM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.15-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
and the diffstat can be found below.

thanks,

greg k-h

All tests passing for Tegra ...

Test results for stable-v5.1:

Quoted 9 lines
    12 builds:	12 pass, 0 fail
    22 boots:	22 pass, 0 fail
    32 tests:	32 pass, 0 fail

Linux version: 5.1.15-rc1-gd74a88068af9
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Thanks for testing all of these and letting me know.

greg k-h