net/macb: increase RX buffer size for GEM
PATCH 1/1 net/macb: increase RX buffer size for GEM
Macb Ethernet controller requires a RX buffer of 128 bytes. It is highly sub-optimal for Gigabit-capable GEM that is able to use a bigger DMA buffer. Change this constant and associated macros with data stored in the private structure.
RX DMA buffer size has to be multiple of 64 bytes as indicated in DMA Configuration Register specification.
--- drivers/net/macb.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-)
drivers/net/macb.c +21 -8
@@ -45,10 +45,16 @@DECLARE_GLOBAL_DATA_PTR ; -#define MACB_RX_BUFFER_SIZE 4096 -#define MACB_RX_RING_SIZE (MACB_RX_BUFFER_SIZE / 128) +/* These buffer sizes must be power of 2 and divisible +* by RX_BUFFER_MULTIPLE +*/ +#define MACB_RX_BUFFER_SIZE 128 +#define GEM_RX_BUFFER_SIZE 2048#define RX_BUFFER_MULTIPLE 64 + +#define MACB_RX_RING_SIZE 32#define MACB_TX_RING_SIZE 16 +#define MACB_TX_TIMEOUT 1000#define MACB_AUTONEG_TIMEOUT 5000000
@@ -95,6 +101,7 @@ struct macb_device {void *tx_buffer;struct macb_dma_desc *rx_ring;struct macb_dma_desc *tx_ring; +size_t rx_buffer_size;unsigned long rx_buffer_dma;unsigned long rx_ring_dma;
@@ -395,15 +402,16 @@ static int _macb_recv(struct macb_device *macb, uchar **packetp) }if (status &MACB_BIT (RX_EOF )) { - buffer = macb->rx_buffer +128 * macb->rx_tail; + buffer = macb->rx_buffer + + macb->rx_buffer_size * macb->rx_tail; length = status &RXBUF_FRMLEN_MASK ;macb_invalidate_rx_buffer (macb);if (macb->wrapped) {unsigned int headlen, taillen; - headlen =128 * (MACB_RX_RING_SIZE - - macb->rx_tail); + headlen = macb->rx_buffer_size * + (MACB_RX_RING_SIZE - macb->rx_tail); taillen = length - headlen;memcpy ((void *)net_rx_packets[0 ], buffer, headlen);
@@ -701,7 +709,7 @@ static void gmac_configure_dma(struct macb_device *macb)u32 buffer_size;u32 dmacfg; - buffer_size =128 /RX_BUFFER_MULTIPLE ; + buffer_size = macb->rx_buffer_size /RX_BUFFER_MULTIPLE ; dmacfg =gem_readl (macb,DMACFG ) & ~GEM_BF (RXBS ,-1L ); dmacfg |=GEM_BF (RXBS , buffer_size);
@@ -746,7 +754,7 @@ static int _macb_init(struct macb_device *macb, const char *name) paddr |=MACB_BIT (RX_WRAP ); macb->rx_ring[i].addr = paddr; macb->rx_ring[i].ctrl =0 ; - paddr +=128 ; + paddr += macb->rx_buffer_size; }macb_flush_ring_desc (macb,RX );macb_flush_rx_buffer (macb);
@@ -957,8 +965,13 @@ static void _macb_eth_initialize(struct macb_device *macb)int id =0 ;/* This is not used by functions we call */ u32 ncfgr; +if (macb_is_gem (macb)) + macb->rx_buffer_size =GEM_RX_BUFFER_SIZE ; +else + macb->rx_buffer_size =MACB_RX_BUFFER_SIZE ; +/* TODO: we need check the rx/tx_ring_dma is dcache line aligned */ - macb->rx_buffer =dma_alloc_coherent (MACB_RX_BUFFER_SIZE , + macb->rx_buffer =dma_alloc_coherent (macb->rx_buffer_size *MACB_RX_RING_SIZE , &macb->rx_buffer_dma); macb->rx_ring =dma_alloc_coherent (MACB_RX_DMA_DESC_SIZE , &macb->rx_ring_dma);
Signature · 1 line
2.22.0
PATCH 1/1 net/macb: increase RX buffer size for GEM
Quoted 9 lines · Ramon Fried
Macb Ethernet controller requires a RX buffer of 128 bytes. It is highly sub-optimal for Gigabit-capable GEM that is able to use a bigger DMA buffer. Change this constant and associated macros with data stored in the private structure.
RX DMA buffer size has to be multiple of 64 bytes as indicated in DMA Configuration Register specification.Signed-off-by Ramon Fried <[email protected]>
Mostly good, but please address the nit below.
Quoted 9 lines
--- drivers/net/macb.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-)drivers/net/macb.c +0
-0
drivers/net/macb.c line 48
Quoted 6 lines
drivers/net/macb.c +1
-2@@ -45,10 +45,16 @@DECLARE_GLOBAL_DATA_PTR ; -#define MACB_RX_BUFFER_SIZE 4096 -#define MACB_RX_RING_SIZE (MACB_RX_BUFFER_SIZE / 128) +/* These buffer sizes must be power of 2 and divisible
Please correct the multi-line comment format.
Quoted 80 lines
drivers/net/macb.c +20
-7+* by RX_BUFFER_MULTIPLE +*/ +#define MACB_RX_BUFFER_SIZE 128 +#define GEM_RX_BUFFER_SIZE 2048#define RX_BUFFER_MULTIPLE 64 + +#define MACB_RX_RING_SIZE 32#define MACB_TX_RING_SIZE 16 +#define MACB_TX_TIMEOUT 1000#define MACB_AUTONEG_TIMEOUT 5000000@@ -95,6 +101,7 @@ struct macb_device {void *tx_buffer;struct macb_dma_desc *rx_ring;struct macb_dma_desc *tx_ring; +size_t rx_buffer_size;unsigned long rx_buffer_dma;unsigned long rx_ring_dma;@@ -395,15 +402,16 @@ static int _macb_recv(struct macb_device *macb, uchar **packetp) }if (status &MACB_BIT (RX_EOF )) { - buffer = macb->rx_buffer +128 * macb->rx_tail; + buffer = macb->rx_buffer + + macb->rx_buffer_size * macb->rx_tail; length = status &RXBUF_FRMLEN_MASK ;macb_invalidate_rx_buffer (macb);if (macb->wrapped) {unsigned int headlen, taillen; - headlen =128 * (MACB_RX_RING_SIZE - - macb->rx_tail); + headlen = macb->rx_buffer_size * + (MACB_RX_RING_SIZE - macb->rx_tail); taillen = length - headlen;memcpy ((void *)net_rx_packets[0 ], buffer, headlen);@@ -701,7 +709,7 @@ static void gmac_configure_dma(struct macb_device *macb)u32 buffer_size;u32 dmacfg; - buffer_size =128 /RX_BUFFER_MULTIPLE ; + buffer_size = macb->rx_buffer_size /RX_BUFFER_MULTIPLE ; dmacfg =gem_readl (macb,DMACFG ) & ~GEM_BF (RXBS ,-1L ); dmacfg |=GEM_BF (RXBS , buffer_size);@@ -746,7 +754,7 @@ static int _macb_init(struct macb_device *macb, const char *name) paddr |=MACB_BIT (RX_WRAP ); macb->rx_ring[i].addr = paddr; macb->rx_ring[i].ctrl =0 ; - paddr +=128 ; + paddr += macb->rx_buffer_size; }macb_flush_ring_desc (macb,RX );macb_flush_rx_buffer (macb);@@ -957,8 +965,13 @@ static void _macb_eth_initialize(struct macb_device *macb)int id =0 ;/* This is not used by functions we call */ u32 ncfgr; +if (macb_is_gem (macb)) + macb->rx_buffer_size =GEM_RX_BUFFER_SIZE ; +else + macb->rx_buffer_size =MACB_RX_BUFFER_SIZE ; +/* TODO: we need check the rx/tx_ring_dma is dcache line aligned */ - macb->rx_buffer =dma_alloc_coherent (MACB_RX_BUFFER_SIZE , + macb->rx_buffer =dma_alloc_coherent (macb->rx_buffer_size *MACB_RX_RING_SIZE , &macb->rx_buffer_dma); macb->rx_ring =dma_alloc_coherent (MACB_RX_DMA_DESC_SIZE , &macb->rx_ring_dma); --2.22.0
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
PATCH 1/1 net/macb: increase RX buffer size for GEM
Quoted 10 lines · Joe Hershberger
Quoted 8 lines · Ramon Fried
Macb Ethernet controller requires a RX buffer of 128 bytes. It is highly sub-optimal for Gigabit-capable GEM that is able to use a bigger DMA buffer. Change this constant and associated macros with data stored in the private structure.
RX DMA buffer size has to be multiple of 64 bytes as indicated in DMA Configuration Register specification.
Quoted 3 lines
Quoted 1 line
Signed-off-by Ramon Fried <[email protected]>Mostly good, but please address the nit below.
Will do.
Quoted 101 lines
Acked-by Joe Hershberger <[email protected]>Quoted 9 lines
--- drivers/net/macb.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-)drivers/net/macb.c +0
-0drivers/net/macb.c line 48
Quoted 6 lines
drivers/net/macb.c +1
-2@@ -45,10 +45,16 @@DECLARE_GLOBAL_DATA_PTR ; -#define MACB_RX_BUFFER_SIZE 4096 -#define MACB_RX_RING_SIZE (MACB_RX_BUFFER_SIZE / 128) +/* These buffer sizes must be power of 2 and divisible Please correct the multi-line comment format.
Quoted 80 lines
drivers/net/macb.c +20
-7+* by RX_BUFFER_MULTIPLE +*/ +#define MACB_RX_BUFFER_SIZE 128 +#define GEM_RX_BUFFER_SIZE 2048#define RX_BUFFER_MULTIPLE 64 + +#define MACB_RX_RING_SIZE 32#define MACB_TX_RING_SIZE 16 +#define MACB_TX_TIMEOUT 1000#define MACB_AUTONEG_TIMEOUT 5000000@@ -95,6 +101,7 @@ struct macb_device {void *tx_buffer;struct macb_dma_desc *rx_ring;struct macb_dma_desc *tx_ring; +size_t rx_buffer_size;unsigned long rx_buffer_dma;unsigned long rx_ring_dma;@@ -395,15 +402,16 @@ static int _macb_recv(struct macb_device *macb, uchar **packetp) }if (status &MACB_BIT (RX_EOF )) { - buffer = macb->rx_buffer +128 * macb->rx_tail; + buffer = macb->rx_buffer + + macb->rx_buffer_size * macb->rx_tail; length = status &RXBUF_FRMLEN_MASK ;macb_invalidate_rx_buffer (macb);if (macb->wrapped) {unsigned int headlen, taillen; - headlen =128 * (MACB_RX_RING_SIZE - - macb->rx_tail); + headlen = macb->rx_buffer_size * + (MACB_RX_RING_SIZE - macb->rx_tail); taillen = length - headlen;memcpy ((void *)net_rx_packets[0 ], buffer, headlen);@@ -701,7 +709,7 @@ static void gmac_configure_dma(struct macb_device *macb)u32 buffer_size;u32 dmacfg; - buffer_size =128 /RX_BUFFER_MULTIPLE ; + buffer_size = macb->rx_buffer_size /RX_BUFFER_MULTIPLE ; dmacfg =gem_readl (macb,DMACFG ) & ~GEM_BF (RXBS ,-1L ); dmacfg |=GEM_BF (RXBS , buffer_size);@@ -746,7 +754,7 @@ static int _macb_init(struct macb_device *macb, const char *name) paddr |=MACB_BIT (RX_WRAP ); macb->rx_ring[i].addr = paddr; macb->rx_ring[i].ctrl =0 ; - paddr +=128 ; + paddr += macb->rx_buffer_size; }macb_flush_ring_desc (macb,RX );macb_flush_rx_buffer (macb);@@ -957,8 +965,13 @@ static void _macb_eth_initialize(struct macb_device *macb)int id =0 ;/* This is not used by functions we call */ u32 ncfgr; +if (macb_is_gem (macb)) + macb->rx_buffer_size =GEM_RX_BUFFER_SIZE ; +else + macb->rx_buffer_size =MACB_RX_BUFFER_SIZE ; +/* TODO: we need check the rx/tx_ring_dma is dcache line aligned */ - macb->rx_buffer =dma_alloc_coherent (MACB_RX_BUFFER_SIZE , + macb->rx_buffer =dma_alloc_coherent (macb->rx_buffer_size *MACB_RX_RING_SIZE , &macb->rx_buffer_dma); macb->rx_ring =dma_alloc_coherent (MACB_RX_DMA_DESC_SIZE , &macb->rx_ring_dma); --2.22.0
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot