Skip to contentSkip to conversation

ASoC : cs4265 : readable register too low

PATCH New Sasha Levin 1 participant 6 messages Jun 26, 2019

Subsystems (4)
lore
Share & tools
lore
author maintainer
#1 lore raw

PATCH 2/6 spi: bitbang: Fix NULL pointer dereference in spi_unregister_master

In reply to Sasha Levin

From: YueHaibing <[email protected]>

[ Upstream commit 5caaf29af5ca82d5da8bc1d0ad07d9e664ccf1d8 ]

If spi_register_master fails in spi_bitbang_start because device_add failure, We should return the error code other than 0, otherwise calling spi_bitbang_stop may trigger NULL pointer dereference like this:

BUG: KASAN: null-ptr-deref in __list_del_entry_valid+0x45/0xd0
Read of size 8 at addr 0000000000000000 by task syz-executor.0/3661

CPU: 0 PID: 3661 Comm: syz-executor.0 Not tainted 5.1.0+ #28
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 dump_stack+0xa9/0x10e
 ? __list_del_entry_valid+0x45/0xd0
 ? __list_del_entry_valid+0x45/0xd0
 __kasan_report+0x171/0x18d
 ? __list_del_entry_valid+0x45/0xd0
 kasan_report+0xe/0x20
 __list_del_entry_valid+0x45/0xd0
 spi_unregister_controller+0x99/0x1b0
 spi_lm70llp_attach+0x3ae/0x4b0 [spi_lm70llp]
 ? 0xffffffffc1128000
 ? klist_next+0x131/0x1e0
 ? driver_detach+0x40/0x40 [parport]
 port_check+0x3b/0x50 [parport]
 bus_for_each_dev+0x115/0x180
 ? subsys_dev_iter_exit+0x20/0x20
 __parport_register_driver+0x1f0/0x210 [parport]
 ? 0xffffffffc1150000
 do_one_initcall+0xb9/0x3b5
 ? perf_trace_initcall_level+0x270/0x270
 ? kasan_unpoison_shadow+0x30/0x40
 ? kasan_unpoison_shadow+0x30/0x40
 do_init_module+0xe0/0x330
 load_module+0x38eb/0x4270
 ? module_frob_arch_sections+0x20/0x20
 ? kernel_read_file+0x188/0x3f0
 ? find_held_lock+0x6d/0xd0
 ? fput_many+0x1a/0xe0
 ? __do_sys_finit_module+0x162/0x190
 __do_sys_finit_module+0x162/0x190
 ? __ia32_sys_init_module+0x40/0x40
 ? __mutex_unlock_slowpath+0xb4/0x3f0
 ? wait_for_completion+0x240/0x240
 ? vfs_write+0x160/0x2a0
 ? lockdep_hardirqs_off+0xb5/0x100
 ? mark_held_locks+0x1a/0x90
 ? do_syscall_64+0x14/0x2a0
 do_syscall_64+0x72/0x2a0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes 702a4879ec33 ("spi: bitbang: Let spi_bitbang_start() take a reference to master")
---
 drivers/spi/spi-bitbang.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/spi/spi-bitbang.c +1 -1
index 3aa9e6e3dac8..4ef54436b9d4 100644
@@ -392,7 +392,7 @@ int spi_bitbang_start(struct spi_bitbang *bitbang)
 	if (ret)
 		spi_master_put(master);
 
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(spi_bitbang_start);
 
Signature · 1 line
2.20.1
author maintainer
#5 lore raw

PATCH 6/6 scsi: hpsa: correct ioaccel2 chaining

In reply to Sasha Levin

From: Don Brace <[email protected]>

[ Upstream commit 625d7d3518875c4d303c652a198feaa13d9f52d9 ]

- set ioaccel2_sg_element member 'chain_indicator' to IOACCEL2_LAST_SG for the last s/g element.

- set ioaccel2_sg_element member 'chain_indicator' to IOACCEL2_CHAIN when chaining.

---
 drivers/scsi/hpsa.c     | 7 ++++++-
 drivers/scsi/hpsa_cmd.h | 1 +
 2 files changed, 7 insertions(+), 1 deletion(-)
drivers/scsi/hpsa.c +6 -1
index 910b795fc5eb..e0952882e132 100644
@@ -4562,7 +4562,7 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
 			curr_sg->reserved[0] = 0;
 			curr_sg->reserved[1] = 0;
 			curr_sg->reserved[2] = 0;
-			curr_sg->chain_indicator = 0x80;
+			curr_sg->chain_indicator = IOACCEL2_CHAIN;
 
 			curr_sg = h->ioaccel2_cmd_sg_list[c->cmdindex];
 		}
@@ -4579,6 +4579,11 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
 			curr_sg++;
 		}
 
+		/*
+		 * Set the last s/g element bit
+		 */
+		(curr_sg - 1)->chain_indicator = IOACCEL2_LAST_SG;
+
 		switch (cmd->sc_data_direction) {
 		case DMA_TO_DEVICE:
 			cp->direction &= ~IOACCEL2_DIRECTION_MASK;
drivers/scsi/hpsa_cmd.h +1 -0
index 26488e2a7f02..7ffde12d57d4 100644
@@ -513,6 +513,7 @@ struct ioaccel2_sg_element {
 	u8 reserved[3];
 	u8 chain_indicator;
 #define IOACCEL2_CHAIN 0x80
+#define IOACCEL2_LAST_SG 0x40
 };
 
 /*
Signature · 1 line
2.20.1

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/6 ASoC : cs4265 : readable register too low

From: Matt Flax <[email protected]>

[ Upstream commit f3df05c805983427319eddc2411a2105ee1757cf ]

The cs4265_readable_register function stopped short of the maximum register.

An example bug is taken from :
https://github.com/Audio-Injector/Ultra/issues/25

Where alsactl store fails with :
Cannot read control '2,0,0,C Data Buffer,0': Input/output error

This patch fixes the bug by setting the cs4265 to have readable registers up to the maximum hardware register CS4265_MAX_REGISTER.

---
 sound/soc/codecs/cs4265.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/codecs/cs4265.c +1 -1
index 93b02be3a90e..6edec2387861 100644
@@ -60,7 +60,7 @@ static const struct reg_default cs4265_reg_defaults[] = {
 static bool cs4265_readable_register(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
-	case CS4265_CHIP_ID ... CS4265_SPDIF_CTL2:
+	case CS4265_CHIP_ID ... CS4265_MAX_REGISTER:
 		return true;
 	default:
 		return false;
Signature · 1 line
2.20.1
author maintainer
#2 lore raw

PATCH 3/6 ASoC: max98090: remove 24-bit format support if RJ is 0

From: Yu-Hsuan Hsu <[email protected]>

[ Upstream commit 5628c8979642a076f91ee86c3bae5ad251639af0 ]

The supported formats are S16_LE and S24_LE now. However, by datasheet of max98090, S24_LE is only supported when it is in the right justified mode. We should remove 24-bit format if it is not in that mode to avoid triggering error.

---
 sound/soc/codecs/max98090.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
sound/soc/codecs/max98090.c +16 -0
index 3e65dc74eb33..e7aef841f87d 100644
@@ -1924,6 +1924,21 @@ static int max98090_configure_dmic(struct max98090_priv *max98090,
 	return 0;
 }
 
+static int max98090_dai_startup(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct max98090_priv *max98090 = snd_soc_component_get_drvdata(component);
+	unsigned int fmt = max98090->dai_fmt;
+
+	/* Remove 24-bit format support if it is not in right justified mode. */
+	if ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) != SND_SOC_DAIFMT_RIGHT_J) {
+		substream->runtime->hw.formats = SNDRV_PCM_FMTBIT_S16_LE;
+		snd_pcm_hw_constraint_msbits(substream->runtime, 0, 16, 16);
+	}
+	return 0;
+}
+
 static int max98090_dai_hw_params(struct snd_pcm_substream *substream,
 				   struct snd_pcm_hw_params *params,
 				   struct snd_soc_dai *dai)
@@ -2331,6 +2346,7 @@ EXPORT_SYMBOL_GPL(max98090_mic_detect);
 #define MAX98090_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE)
 
 static const struct snd_soc_dai_ops max98090_dai_ops = {
+	.startup = max98090_dai_startup,
 	.set_sysclk = max98090_dai_set_sysclk,
 	.set_fmt = max98090_dai_set_fmt,
 	.set_tdm_slot = max98090_set_tdm_slot,
Signature · 1 line
2.20.1
author maintainer
#3 lore raw

PATCH 4/6 usb: gadget: fusb300_udc: Fix memory leak of fusb300->ep[i]

In reply to Sasha Levin

From: Young Xiao <[email protected]>

[ Upstream commit 62fd0e0a24abeebe2c19fce49dd5716d9b62042d ]

There is no deallocation of fusb300->ep[i] elements, allocated at fusb300_probe.

The patch adds deallocation of fusb300->ep array elements.

---
 drivers/usb/gadget/udc/fusb300_udc.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/usb/gadget/udc/fusb300_udc.c +5 -0
index 948845c90e47..351012c498c5 100644
@@ -1345,12 +1345,15 @@ static const struct usb_gadget_ops fusb300_gadget_ops = {
 static int fusb300_remove(struct platform_device *pdev)
 {
 	struct fusb300 *fusb300 = platform_get_drvdata(pdev);
+	int i;
 
 	usb_del_gadget_udc(&fusb300->gadget);
 	iounmap(fusb300->reg);
 	free_irq(platform_get_irq(pdev, 0), fusb300);
 
 	fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req);
+	for (i = 0; i < FUSB300_MAX_NUM_EP; i++)
+		kfree(fusb300->ep[i]);
 	kfree(fusb300);
 
 	return 0;
@@ -1494,6 +1497,8 @@ static int fusb300_probe(struct platform_device *pdev)
 		if (fusb300->ep0_req)
 			fusb300_free_request(&fusb300->ep[0]->ep,
 				fusb300->ep0_req);
+		for (i = 0; i < FUSB300_MAX_NUM_EP; i++)
+			kfree(fusb300->ep[i]);
 		kfree(fusb300);
 	}
 	if (reg)
Signature · 1 line
2.20.1
author maintainer
#4 lore raw

PATCH 5/6 usb: gadget: udc: lpc32xx: allocate descriptor with GFP_ATOMIC

In reply to Sasha Levin

From: Alexandre Belloni <[email protected]>

[ Upstream commit fbc318afadd6e7ae2252d6158cf7d0c5a2132f7d ]

Gadget drivers may queue request in interrupt context. This would lead to a descriptor allocation in that context. In that case we would hit BUG_ON(in_interrupt()) in __get_vm_area_node.

Also remove the unnecessary cast.

---
 drivers/usb/gadget/udc/lpc32xx_udc.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/usb/gadget/udc/lpc32xx_udc.c +1 -2
index 00b5006baf15..90d24f62bd81 100644
@@ -964,8 +964,7 @@ static struct lpc32xx_usbd_dd_gad *udc_dd_alloc(struct lpc32xx_udc *udc)
 	dma_addr_t			dma;
 	struct lpc32xx_usbd_dd_gad	*dd;
 
-	dd = (struct lpc32xx_usbd_dd_gad *) dma_pool_alloc(
-			udc->dd_cache, (GFP_KERNEL | GFP_DMA), &dma);
+	dd = dma_pool_alloc(udc->dd_cache, GFP_ATOMIC | GFP_DMA, &dma);
 	if (dd)
 		dd->this_dma = dma;
 
Signature · 1 line
2.20.1