Skip to contentSkip to conversation

igc: Update the MAC reset flow

PATCH New Sasha Neftin 2 participants 2 messages Jun 26, 2019 – Jul 16, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 igc: Update the MAC reset flow

Use Device Reset flow instead of Port Reset flow. This flow performs a reset of the entire controller device, resulting in a state nearly approximating the state following a power-up reset or internal PCIe reset, except for system PCI configration.

---
 drivers/net/ethernet/intel/igc/igc_base.c    | 2 +-
 drivers/net/ethernet/intel/igc/igc_defines.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/intel/igc/igc_base.c +1 -1
index 019107e46428..3b00b19125c8 100644
@@ -40,7 +40,7 @@ static s32 igc_reset_hw_base(struct igc_hw *hw)
 	ctrl = rd32(IGC_CTRL);
 
 	hw_dbg("Issuing a global reset to MAC\n");
-	wr32(IGC_CTRL, ctrl | IGC_CTRL_RST);
+	wr32(IGC_CTRL, ctrl | IGC_CTRL_DEV_RST);
 
 	ret_val = igc_get_auto_rd_done(hw);
 	if (ret_val) {
drivers/net/ethernet/intel/igc/igc_defines.h +1 -1
index fc0ccfe38a20..11b99acf4abe 100644
@@ -54,7 +54,7 @@
 #define IGC_ERR_SWFW_SYNC		13
 
 /* Device Control */
-#define IGC_CTRL_RST		0x04000000  /* Global reset */
+#define IGC_CTRL_DEV_RST	0x20000000  /* Device reset */
 
 #define IGC_CTRL_PHY_RST	0x80000000  /* PHY Reset */
 #define IGC_CTRL_SLU		0x00000040  /* Set link up (Force Link) */
Signature · 1 line
2.11.0
#1 lore raw

PATCH 1/1 igc: Update the MAC reset flow

Quoted 11 lines · Sasha Neftin

Use Device Reset flow instead of Port Reset flow. This flow performs a reset of the entire controller device, resulting in a state nearly approximating the state following a power-up reset or internal PCIe reset, except for system PCI configration.

---
 drivers/net/ethernet/intel/igc/igc_base.c    | 2 +-
 drivers/net/ethernet/intel/igc/igc_defines.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)