Skip to contentSkip to conversation

opp: Export dev_pm_opp_set_genpd_virt_dev()

PATCH In review Rajendra Nayak 2 participants 6 messages Jul 2, 2019 – Jul 3, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 opp: Export dev_pm_opp_set_genpd_virt_dev()

Export dev_pm_opp_set_genpd_virt_dev() so loadable modules can use it.

---
 drivers/opp/core.c | 1 +
 1 file changed, 1 insertion(+)
drivers/opp/core.c +1 -0
index 8fbdbedc009c..ae033bb1e5b7 100644
@@ -1797,6 +1797,7 @@ struct opp_table *dev_pm_opp_set_genpd_virt_dev(struct device *dev,
 
 	return opp_table;
 }
+EXPORT_SYMBOL_GPL(dev_pm_opp_set_genpd_virt_dev);
 
 /**
  * dev_pm_opp_put_genpd_virt_dev() - Releases resources blocked for genpd device.
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
#1 lore raw

PATCH 2/2 opp: Manage empty OPP tables with clk handle

With OPP core now supporting DVFS for IO devices, we have instances of IO devices (same IP block) with require an OPP on some platforms/SoCs while just needing to scale the clock on some others.
In order to avoid conditional code in every driver, (to check for availability of OPPs and then deciding to do either dev_pm_opp_set_rate() or clk_set_rate()) add support to manage empty OPP tables with a clk handle. This makes dev_pm_opp_set_rate() equivalent of a clk_set_rate() for devices with just a clk and no OPPs specified.

---
 drivers/opp/core.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/opp/core.c +5 -0
index ae033bb1e5b7..fa7d4d6d37b3 100644
@@ -801,6 +801,11 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 		goto put_opp_table;
 	}
 
+	if (!_get_opp_count(opp_table)) {
+		ret = _generic_set_opp_clk_only(dev, clk, freq);
+		goto put_opp_table;
+	}
+
 	temp_freq = old_freq;
 	old_opp = _find_freq_ceil(opp_table, &temp_freq);
 	if (IS_ERR(old_opp)) {
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
#2 lore raw

Re: [PATCH 2/2] opp: Manage empty OPP tables with clk handle

Quoted 2 lines · Rajendra Nayak

With OPP core now supporting DVFS for IO devices, we have instances of IO devices (same IP block) with require an OPP on some platforms/SoCs

which

Quoted 1 line

while just needing to scale the clock on some others.

Blank line here.

Quoted 1 line

In order to avoid conditional code in every driver, (to check for

remove ,

Quoted 2 lines

availability of OPPs and then deciding to do either dev_pm_opp_set_rate() or clk_set_rate()) add support to manage empty OPP tables with a clk handle.

Blank line here.

Quoted 13 lines

This makes dev_pm_opp_set_rate() equivalent of a clk_set_rate() for devices with just a clk and no OPPs specified.

---
 drivers/opp/core.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/opp/core.c +0 -0
index ae033bb1e5b7..fa7d4d6d37b3 100644

drivers/opp/core.c int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) · line 803

Quoted 3 lines
drivers/opp/core.c +0 -0
@@ -801,6 +801,11 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 		goto put_opp_table;
 	}
 

Explain the rationale behind this code here in a comment.

drivers/opp/core.c int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) · line 811

Quoted 8 lines
drivers/opp/core.c +5 -0
+	if (!_get_opp_count(opp_table)) {
+		ret = _generic_set_opp_clk_only(dev, clk, freq);
+		goto put_opp_table;
+	}
+
 	temp_freq = old_freq;
 	old_opp = _find_freq_ceil(opp_table, &temp_freq);
 	if (IS_ERR(old_opp)) {

Also, rebase over the OPP branch please:

git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm.git opp/linux-next

or pm/linux-next

Signature · 1 line
viresh
#3 lore raw

Re: [PATCH 2/2] opp: Manage empty OPP tables with clk handle

[]..

Quoted 4 lines
Quoted 1 line

Explain the rationale behind this code here in a comment.

Quoted 10 lines

Review

Quoted 8 lines
(quoted diff) +5 -0
+	if (!_get_opp_count(opp_table)) {
+		ret = _generic_set_opp_clk_only(dev, clk, freq);
+		goto put_opp_table;
+	}
+
  	temp_freq = old_freq;
  	old_opp = _find_freq_ceil(opp_table, &temp_freq);
  	if (IS_ERR(old_opp)) {

Also, rebase over the OPP branch please:

thanks, I will fix/rebase and repost,
in the meantime while I was testing this a little more I realized I also need something like the change below to avoid a refcount mismatch WARN when empty OPP table is removed using dev_pm_opp_of_remove_table()

drivers/opp/core.c +2 -1
index fa7d4d6d37b3..20128a88baf2 100644
@@ -2118,7 +2118,8 @@ void _dev_pm_opp_find_and_remove_table(struct device *dev)
                return;
        }
 
-       _put_opp_list_kref(opp_table);
+       if (_get_opp_count(opp_table))
+               _put_opp_list_kref(opp_table);
 
        /* Drop reference taken by _find_opp_table() */
        dev_pm_opp_put_opp_table(opp_table);

Does this look like a good way to fix it?

Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
#4 lore raw

Re: [PATCH 2/2] opp: Manage empty OPP tables with clk handle

Quoted 33 lines · Rajendra Nayak

[]..

Quoted 13 lines

Explain the rationale behind this code here in a comment.

Review

Quoted 8 lines
(quoted diff) +5 -0
+	if (!_get_opp_count(opp_table)) {
+		ret = _generic_set_opp_clk_only(dev, clk, freq);
+		goto put_opp_table;
+	}
+
  	temp_freq = old_freq;
  	old_opp = _find_freq_ceil(opp_table, &temp_freq);
  	if (IS_ERR(old_opp)) {

Also, rebase over the OPP branch please:

thanks, I will fix/rebase and repost,
in the meantime while I was testing this a little more I realized I also need something like the change below to avoid a refcount mismatch WARN when empty OPP table is removed using dev_pm_opp_of_remove_table()

drivers/opp/core.c +2 -1
index fa7d4d6d37b3..20128a88baf2 100644
@@ -2118,7 +2118,8 @@ void _dev_pm_opp_find_and_remove_table(struct device *dev)
                return;
        }
-       _put_opp_list_kref(opp_table);
+       if (_get_opp_count(opp_table))
+               _put_opp_list_kref(opp_table);
        /* Drop reference taken by _find_opp_table() */
        dev_pm_opp_put_opp_table(opp_table);
 
Quoted 1 line

Does this look like a good way to fix it?

No. If an OPP table only has dynamic OPPs, this will still generate warning. Below is the fix I would suggest. Please test it, I haven't tested it at all :)

Signature · 23 lines
viresh

-------------------------8<-------------------------
From: Viresh Kumar <[email protected]>
Date: Wed, 3 Jul 2019 15:03:14 +0530
Subject: [PATCH] opp: Don't decrement uninitialized list_kref

The list_kref was added for static OPPs and to track their users. The
kref is initialized while the static OPPs are added, but removed
unconditionally even if the static OPPs were never added. This causes
refcount mismatch warnings currently.

Fix that by always initializing the kref when the OPP table is first
initialized. The refcount is later incremented only for the second user
onwards.

Fixes: d0e8ae6c26da ("OPP: Create separate kref for static OPPs list")
Reported-by: Rajendra Nayak <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
---
 drivers/opp/core.c |  1 +
 drivers/opp/of.c   | 21 ++++-----------------
 2 files changed, 5 insertions(+), 17 deletions(-)
drivers/opp/core.c +1 -0
index 89ec6aa220cf..2958cc7bbb58 100644
@@ -943,6 +943,7 @@ static struct opp_table *_allocate_opp_table(struct device *dev, int index)
 	BLOCKING_INIT_NOTIFIER_HEAD(&opp_table->head);
 	INIT_LIST_HEAD(&opp_table->opp_list);
 	kref_init(&opp_table->kref);
+	kref_init(&opp_table->list_kref);
 
 	/* Secure the device table modification */
 	list_add(&opp_table->node, &opp_tables);
drivers/opp/of.c +4 -17
index a637f30552a3..bf62b357437c 100644
@@ -665,8 +665,6 @@ static int _of_add_opp_table_v2(struct device *dev, struct opp_table *opp_table)
 		return 0;
 	}
 
-	kref_init(&opp_table->list_kref);
-
 	/* We have opp-table node now, iterate over it and add OPPs */
 	for_each_available_child_of_node(opp_table->np, np) {
 		opp = _opp_add_static_v2(opp_table, dev, np);
@@ -675,17 +673,15 @@ static int _of_add_opp_table_v2(struct device *dev, struct opp_table *opp_table)
 			dev_err(dev, "%s: Failed to add OPP, %d\n", __func__,
 				ret);
 			of_node_put(np);
-			goto put_list_kref;
+			return ret;
 		} else if (opp) {
 			count++;
 		}
 	}
 
 	/* There should be one of more OPP defined */
-	if (WARN_ON(!count)) {
-		ret = -ENOENT;
-		goto put_list_kref;
-	}
+	if (WARN_ON(!count))
+		return -ENOENT;
 
 	list_for_each_entry(opp, &opp_table->opp_list, node)
 		pstate_count += !!opp->pstate;
@@ -694,8 +690,7 @@ static int _of_add_opp_table_v2(struct device *dev, struct opp_table *opp_table)
 	if (pstate_count && pstate_count != count) {
 		dev_err(dev, "Not all nodes have performance state set (%d: %d)\n",
 			count, pstate_count);
-		ret = -ENOENT;
-		goto put_list_kref;
+		return -ENOENT;
 	}
 
 	if (pstate_count)
@@ -704,11 +699,6 @@ static int _of_add_opp_table_v2(struct device *dev, struct opp_table *opp_table)
 	opp_table->parsed_static_opps = true;
 
 	return 0;
-
-put_list_kref:
-	_put_opp_list_kref(opp_table);
-
-	return ret;
 }
 
 /* Initializes OPP tables based on old-deprecated bindings */
@@ -734,8 +724,6 @@ static int _of_add_opp_table_v1(struct device *dev, struct opp_table *opp_table)
 		return -EINVAL;
 	}
 
-	kref_init(&opp_table->list_kref);
-
 	val = prop->value;
 	while (nr) {
 		unsigned long freq = be32_to_cpup(val++) * 1000;
@@ -745,7 +733,6 @@ static int _of_add_opp_table_v1(struct device *dev, struct opp_table *opp_table)
 		if (ret) {
 			dev_err(dev, "%s: Failed to add OPP %ld (%d)\n",
 				__func__, freq, ret);
-			_put_opp_list_kref(opp_table);
 			return ret;
 		}
 		nr -= 2;
#5 lore raw

Re: [PATCH 2/2] opp: Manage empty OPP tables with clk handle

Quoted 34 lines · Viresh Kumar
Quoted 33 lines · Rajendra Nayak

[]..

Quoted 13 lines

Explain the rationale behind this code here in a comment.

Review

Quoted 8 lines
(quoted diff) +5 -0
+	if (!_get_opp_count(opp_table)) {
+		ret = _generic_set_opp_clk_only(dev, clk, freq);
+		goto put_opp_table;
+	}
+
   	temp_freq = old_freq;
   	old_opp = _find_freq_ceil(opp_table, &temp_freq);
   	if (IS_ERR(old_opp)) {

Also, rebase over the OPP branch please:

thanks, I will fix/rebase and repost,
in the meantime while I was testing this a little more I realized I also need something like the change below to avoid a refcount mismatch WARN when empty OPP table is removed using dev_pm_opp_of_remove_table()

drivers/opp/core.c +2 -1
index fa7d4d6d37b3..20128a88baf2 100644
@@ -2118,7 +2118,8 @@ void _dev_pm_opp_find_and_remove_table(struct device *dev)
                 return;
         }
-       _put_opp_list_kref(opp_table);
+       if (_get_opp_count(opp_table))
+               _put_opp_list_kref(opp_table);
         /* Drop reference taken by _find_opp_table() */
         dev_pm_opp_put_opp_table(opp_table);
 
Quoted 5 lines
Quoted 1 line

Does this look like a good way to fix it?

No. If an OPP table only has dynamic OPPs, this will still generate warning. Below is the fix I would suggest. Please test it, I haven't tested it at all :)

thanks, yes, this seems to work.

Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation