Skip to contentSkip to conversation

usb: pci-quirks: AMD PLL quirk fix

PATCH In review Ryan Kennedy 3 participants 8 messages Jul 4, 2019 – Jul 6, 2019

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

cover usb: pci-quirks: AMD PLL quirk fix

This series contains a minor fix for the AMD PLL USB quirk plus some clean up to the related code.

Ryan Kennedy (2):
usb: pci-quirks: Correct AMD PLL quirk detection
usb: pci-quirks: Minor cleanup for AMD PLL quirk

 drivers/usb/host/ehci-pci.c   |  4 ++--
 drivers/usb/host/ohci-pci.c   |  2 +-
 drivers/usb/host/pci-quirks.c | 45 +++++++++++++++++++++--------------
 drivers/usb/host/pci-quirks.h |  2 +-
 drivers/usb/host/xhci-pci.c   |  2 +-
 5 files changed, 32 insertions(+), 23 deletions(-)
Signature · 1 line
2.21.0
#1 lore raw

PATCH 1/2 usb: pci-quirks: Correct AMD PLL quirk detection

The AMD PLL USB quirk is incorrectly enabled on newer Ryzen chipsets. The logic in usb_amd_find_chipset_info currently checks for unaffected chipsets rather than affected ones. This broke once a new chipset was added in e788787ef. It makes more sense to reverse the logic so it won't need to be updated as new chipsets are added. Note that the core of the workaround in usb_amd_quirk_pll does correctly check the chipset.

---
 drivers/usb/host/pci-quirks.c | 31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)
drivers/usb/host/pci-quirks.c +19 -12
index 3ce71cbfbb58..ad05c27b3a7b 100644
@@ -205,7 +205,7 @@ int usb_amd_find_chipset_info(void)
 {
 	unsigned long flags;
 	struct amd_chipset_info info;
-	int ret;
+	int need_pll_quirk = 0;
 
 	spin_lock_irqsave(&amd_lock, flags);
 
@@ -219,21 +219,28 @@ int usb_amd_find_chipset_info(void)
 	spin_unlock_irqrestore(&amd_lock, flags);
 
 	if (!amd_chipset_sb_type_init(&info)) {
-		ret = 0;
 		goto commit;
 	}
 
-	/* Below chipset generations needn't enable AMD PLL quirk */
-	if (info.sb_type.gen == AMD_CHIPSET_UNKNOWN ||
-			info.sb_type.gen == AMD_CHIPSET_SB600 ||
-			info.sb_type.gen == AMD_CHIPSET_YANGTZE ||
-			(info.sb_type.gen == AMD_CHIPSET_SB700 &&
-			info.sb_type.rev > 0x3b)) {
+	switch (info.sb_type.gen) {
+	case AMD_CHIPSET_SB700:
+		need_pll_quirk = info.sb_type.rev <= 0x3B;
+		break;
+	case AMD_CHIPSET_SB800:
+	case AMD_CHIPSET_HUDSON2:
+	case AMD_CHIPSET_BOLTON:
+		need_pll_quirk = 1;
+		break;
+	default:
+		need_pll_quirk = 0;
+		break;
+	}
+
+	if (!need_pll_quirk) {
 		if (info.smbus_dev) {
 			pci_dev_put(info.smbus_dev);
 			info.smbus_dev = NULL;
 		}
-		ret = 0;
 		goto commit;
 	}
 
@@ -252,7 +259,7 @@ int usb_amd_find_chipset_info(void)
 		}
 	}
 
-	ret = info.probe_result = 1;
+	need_pll_quirk = info.probe_result = 1;
 	printk(KERN_DEBUG "QUIRK: Enable AMD PLL fix\n");
 
 commit:
@@ -263,7 +270,7 @@ int usb_amd_find_chipset_info(void)
 
 		/* Mark that we where here */
 		amd_chipset.probe_count++;
-		ret = amd_chipset.probe_result;
+		need_pll_quirk = amd_chipset.probe_result;
 
 		spin_unlock_irqrestore(&amd_lock, flags);
 
@@ -277,7 +284,7 @@ int usb_amd_find_chipset_info(void)
 		spin_unlock_irqrestore(&amd_lock, flags);
 	}
 
-	return ret;
+	return need_pll_quirk;
 }
 EXPORT_SYMBOL_GPL(usb_amd_find_chipset_info);
 
Signature · 1 line
2.21.0
#5 lore raw

PATCH 2/2 usb: pci-quirks: Minor cleanup for AMD PLL quirk

In reply to Ryan Kennedy

usb_amd_find_chipset_info() is used for chipset detection for several quirks. It is strange that its return value indicates the need for the PLL quirk, which means it is often ignored. This patch adds a function specifically for checking the PLL quirk like the other ones. Additionally, rename probe_result to something more appropriate.

---
 drivers/usb/host/ehci-pci.c   |  4 ++--
 drivers/usb/host/ohci-pci.c   |  2 +-
 drivers/usb/host/pci-quirks.c | 30 ++++++++++++++++--------------
 drivers/usb/host/pci-quirks.h |  2 +-
 drivers/usb/host/xhci-pci.c   |  2 +-
 5 files changed, 21 insertions(+), 19 deletions(-)
drivers/usb/host/ehci-pci.c +2 -2
index fe9422d3bcdc..b0882c13a1d1 100644
@@ -149,7 +149,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 		break;
 	case PCI_VENDOR_ID_AMD:
 		/* AMD PLL quirk */
-		if (usb_amd_find_chipset_info())
+		if (usb_amd_quirk_pll_check())
 			ehci->amd_pll_fix = 1;
 		/* AMD8111 EHCI doesn't work, according to AMD errata */
 		if (pdev->device == 0x7463) {
@@ -186,7 +186,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 		break;
 	case PCI_VENDOR_ID_ATI:
 		/* AMD PLL quirk */
-		if (usb_amd_find_chipset_info())
+		if (usb_amd_quirk_pll_check())
 			ehci->amd_pll_fix = 1;
 
 		/*
drivers/usb/host/ohci-pci.c +1 -1
index fbcd34911025..208abaaef8f6 100644
@@ -152,7 +152,7 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd)
 {
 	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
 
-	if (usb_amd_find_chipset_info())
+	if (usb_amd_quirk_pll_check())
 		ohci->flags |= OHCI_QUIRK_AMD_PLL;
 
 	/* SB800 needs pre-fetch fix */
drivers/usb/host/pci-quirks.c +16 -14
index ad05c27b3a7b..f6d04491df60 100644
@@ -132,7 +132,7 @@ static struct amd_chipset_info {
 	struct amd_chipset_type sb_type;
 	int isoc_reqs;
 	int probe_count;
-	int probe_result;
+	bool need_pll_quirk;
 } amd_chipset;
 
 static DEFINE_SPINLOCK(amd_lock);
@@ -201,11 +201,11 @@ void sb800_prefetch(struct device *dev, int on)
 }
 EXPORT_SYMBOL_GPL(sb800_prefetch);
 
-int usb_amd_find_chipset_info(void)
+static void usb_amd_find_chipset_info(void)
 {
 	unsigned long flags;
 	struct amd_chipset_info info;
-	int need_pll_quirk = 0;
+	info.need_pll_quirk = 0;
 
 	spin_lock_irqsave(&amd_lock, flags);
 
@@ -213,7 +213,7 @@ int usb_amd_find_chipset_info(void)
 	if (amd_chipset.probe_count > 0) {
 		amd_chipset.probe_count++;
 		spin_unlock_irqrestore(&amd_lock, flags);
-		return amd_chipset.probe_result;
+		return;
 	}
 	memset(&info, 0, sizeof(info));
 	spin_unlock_irqrestore(&amd_lock, flags);
@@ -224,19 +224,19 @@ int usb_amd_find_chipset_info(void)
 
 	switch (info.sb_type.gen) {
 	case AMD_CHIPSET_SB700:
-		need_pll_quirk = info.sb_type.rev <= 0x3B;
+		info.need_pll_quirk = info.sb_type.rev <= 0x3B;
 		break;
 	case AMD_CHIPSET_SB800:
 	case AMD_CHIPSET_HUDSON2:
 	case AMD_CHIPSET_BOLTON:
-		need_pll_quirk = 1;
+		info.need_pll_quirk = 1;
 		break;
 	default:
-		need_pll_quirk = 0;
+		info.need_pll_quirk = 0;
 		break;
 	}
 
-	if (!need_pll_quirk) {
+	if (!info.need_pll_quirk) {
 		if (info.smbus_dev) {
 			pci_dev_put(info.smbus_dev);
 			info.smbus_dev = NULL;
@@ -259,7 +259,6 @@ int usb_amd_find_chipset_info(void)
 		}
 	}
 
-	need_pll_quirk = info.probe_result = 1;
 	printk(KERN_DEBUG "QUIRK: Enable AMD PLL fix\n");
 
 commit:
@@ -270,7 +269,6 @@ int usb_amd_find_chipset_info(void)
 
 		/* Mark that we where here */
 		amd_chipset.probe_count++;
-		need_pll_quirk = amd_chipset.probe_result;
 
 		spin_unlock_irqrestore(&amd_lock, flags);
 
@@ -283,10 +281,7 @@ int usb_amd_find_chipset_info(void)
 		amd_chipset = info;
 		spin_unlock_irqrestore(&amd_lock, flags);
 	}
-
-	return need_pll_quirk;
 }
-EXPORT_SYMBOL_GPL(usb_amd_find_chipset_info);
 
 int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev)
 {
@@ -322,6 +317,13 @@ bool usb_amd_prefetch_quirk(void)
 }
 EXPORT_SYMBOL_GPL(usb_amd_prefetch_quirk);
 
+bool usb_amd_quirk_pll_check(void)
+{
+	usb_amd_find_chipset_info();
+	return amd_chipset.need_pll_quirk;
+}
+EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_check);
+
 /*
  * The hardware normally enables the A-link power management feature, which
  * lets the system lower the power consumption in idle states.
@@ -527,7 +529,7 @@ void usb_amd_dev_put(void)
 	amd_chipset.nb_type = 0;
 	memset(&amd_chipset.sb_type, 0, sizeof(amd_chipset.sb_type));
 	amd_chipset.isoc_reqs = 0;
-	amd_chipset.probe_result = 0;
+	amd_chipset.need_pll_quirk = 0;
 
 	spin_unlock_irqrestore(&amd_lock, flags);
 
drivers/usb/host/pci-quirks.h +1 -1
index 63c633077d9e..e729de21fad7 100644
@@ -5,11 +5,11 @@
 #ifdef CONFIG_USB_PCI
 void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
 int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
-int usb_amd_find_chipset_info(void);
 int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
 bool usb_amd_hang_symptom_quirk(void);
 bool usb_amd_prefetch_quirk(void);
 void usb_amd_dev_put(void);
+bool usb_amd_quirk_pll_check(void);
 void usb_amd_quirk_pll_disable(void);
 void usb_amd_quirk_pll_enable(void);
 void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
drivers/usb/host/xhci-pci.c +1 -1
index c2fe218e051f..1e0236e90687 100644
@@ -130,7 +130,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		xhci->quirks |= XHCI_AMD_0x96_HOST;
 
 	/* AMD PLL quirk */
-	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
+	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_quirk_pll_check())
 		xhci->quirks |= XHCI_AMD_PLL_FIX;
 
 	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
Signature · 1 line
2.21.0
maintainer
#2 lore raw

Re: [PATCH 1/2] usb: pci-quirks: Correct AMD PLL quirk detection

In reply to Ryan Kennedy
Quoted 8 lines · Ryan Kennedy

The AMD PLL USB quirk is incorrectly enabled on newer Ryzen chipsets. The logic in usb_amd_find_chipset_info currently checks for unaffected chipsets rather than affected ones. This broke once a new chipset was added in e788787ef. It makes more sense to reverse the logic so it won't need to be updated as new chipsets are added. Note that the core of the workaround in usb_amd_quirk_pll does correctly check the chipset.

Quoted 4 lines
---
 drivers/usb/host/pci-quirks.c | 31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)

Should this be backported to stable kernels?

thanks,

greg k-h

#3 lore raw

Re: [PATCH 1/2] usb: pci-quirks: Correct AMD PLL quirk detection

Quoted 10 lines · Greg KH
Quoted 8 lines · Ryan Kennedy

The AMD PLL USB quirk is incorrectly enabled on newer Ryzen chipsets. The logic in usb_amd_find_chipset_info currently checks for unaffected chipsets rather than affected ones. This broke once a new chipset was added in e788787ef. It makes more sense to reverse the logic so it won't need to be updated as new chipsets are added. Note that the core of the workaround in usb_amd_quirk_pll does correctly check the chipset.

Quoted 6 lines
Quoted 4 lines
---
 drivers/usb/host/pci-quirks.c | 31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)

Should this be backported to stable kernels?

The bug is fairly harmless, so I wouldn't say it's a must-have. I only noticed this because I saw the log message and was curious what the quirk was for. The fix saves us calling usb_amd_quirk_pll() and taking the lock in there. Others here should know better than I what's stable worthy.

Ryan

Quoted 4 lines

thanks,

greg k-h

maintainer Acked-by on v1 1/2
#4 lore raw

Re: [PATCH 1/2] usb: pci-quirks: Correct AMD PLL quirk detection

In reply to Ryan Kennedy
Quoted 82 lines · Ryan Kennedy

The AMD PLL USB quirk is incorrectly enabled on newer Ryzen chipsets. The logic in usb_amd_find_chipset_info currently checks for unaffected chipsets rather than affected ones. This broke once a new chipset was added in e788787ef. It makes more sense to reverse the logic so it won't need to be updated as new chipsets are added. Note that the core of the workaround in usb_amd_quirk_pll does correctly check the chipset.

---
 drivers/usb/host/pci-quirks.c | 31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)
drivers/usb/host/pci-quirks.c +18 -11
index 3ce71cbfbb58..ad05c27b3a7b 100644
@@ -205,7 +205,7 @@ int usb_amd_find_chipset_info(void)
 {
 	unsigned long flags;
 	struct amd_chipset_info info;
-	int ret;
+	int need_pll_quirk = 0;
 
 	spin_lock_irqsave(&amd_lock, flags);
 
@@ -219,21 +219,28 @@ int usb_amd_find_chipset_info(void)
 	spin_unlock_irqrestore(&amd_lock, flags);
 
 	if (!amd_chipset_sb_type_init(&info)) {
-		ret = 0;
 		goto commit;
 	}
 
-	/* Below chipset generations needn't enable AMD PLL quirk */
-	if (info.sb_type.gen == AMD_CHIPSET_UNKNOWN ||
-			info.sb_type.gen == AMD_CHIPSET_SB600 ||
-			info.sb_type.gen == AMD_CHIPSET_YANGTZE ||
-			(info.sb_type.gen == AMD_CHIPSET_SB700 &&
-			info.sb_type.rev > 0x3b)) {
+	switch (info.sb_type.gen) {
+	case AMD_CHIPSET_SB700:
+		need_pll_quirk = info.sb_type.rev <= 0x3B;
+		break;
+	case AMD_CHIPSET_SB800:
+	case AMD_CHIPSET_HUDSON2:
+	case AMD_CHIPSET_BOLTON:
+		need_pll_quirk = 1;
+		break;
+	default:
+		need_pll_quirk = 0;
+		break;
+	}
+
+	if (!need_pll_quirk) {
 		if (info.smbus_dev) {
 			pci_dev_put(info.smbus_dev);
 			info.smbus_dev = NULL;
 		}
-		ret = 0;
 		goto commit;
 	}
 
@@ -252,7 +259,7 @@ int usb_amd_find_chipset_info(void)
 		}
 	}
 
-	ret = info.probe_result = 1;
+	need_pll_quirk = info.probe_result = 1;
 	printk(KERN_DEBUG "QUIRK: Enable AMD PLL fix\n");
 
 commit:
@@ -263,7 +270,7 @@ int usb_amd_find_chipset_info(void)
 
 		/* Mark that we where here */
 		amd_chipset.probe_count++;
-		ret = amd_chipset.probe_result;
+		need_pll_quirk = amd_chipset.probe_result;
 
 		spin_unlock_irqrestore(&amd_lock, flags);
 

drivers/usb/host/pci-quirks.c int usb_amd_find_chipset_info(void) · line 289

Quoted 7 lines
drivers/usb/host/pci-quirks.c +1 -1
@@ -277,7 +284,7 @@ int usb_amd_find_chipset_info(void)
 		spin_unlock_irqrestore(&amd_lock, flags);
 	}
 
-	return ret;
+	return need_pll_quirk;
 }
 EXPORT_SYMBOL_GPL(usb_amd_find_chipset_info);
maintainer Acked-by on v1 2/2
#6 lore raw

Re: [PATCH 2/2] usb: pci-quirks: Minor cleanup for AMD PLL quirk

In reply to Ryan Kennedy
Quoted 10 lines · Ryan Kennedy

usb_amd_find_chipset_info() is used for chipset detection for several quirks. It is strange that its return value indicates the need for the PLL quirk, which means it is often ignored. This patch adds a function specifically for checking the PLL quirk like the other ones. Additionally, rename probe_result to something more appropriate.

drivers/usb/host/pci-quirks.c bool usb_amd_prefetch_quirk(void) · line 325

Quoted 9 lines
drivers/usb/host/pci-quirks.c +6 -0
@@ -322,6 +317,13 @@ bool usb_amd_prefetch_quirk(void)
 }
 EXPORT_SYMBOL_GPL(usb_amd_prefetch_quirk);
 
+bool usb_amd_quirk_pll_check(void)
+{
+	usb_amd_find_chipset_info();
+	return amd_chipset.need_pll_quirk;
+}
+EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_check);

I really don't see the point of separating out all but one line into a different function. You might as well just rename usb_amd_find_chipset_info to usb_amd_quirk_pll_check (along with the other code adjustments) and be done with it.

However, in the end I don't care if you still want to do this. Either way:

Alan Stern

#7 lore raw

Re: [PATCH 2/2] usb: pci-quirks: Minor cleanup for AMD PLL quirk

Quoted 16 lines · Alan Stern
Quoted 13 lines · Ryan Kennedy

usb_amd_find_chipset_info() is used for chipset detection for several quirks. It is strange that its return value indicates the need for the PLL quirk, which means it is often ignored. This patch adds a function specifically for checking the PLL quirk like the other ones. Additionally, rename probe_result to something more appropriate.

drivers/usb/host/pci-quirks.c +0 -0
@@ -322,6 +317,13 @@ bool usb_amd_prefetch_quirk(void)
 }
 EXPORT_SYMBOL_GPL(usb_amd_prefetch_quirk);
 
Quoted 11 lines

drivers/usb/host/pci-quirks.c bool usb_amd_prefetch_quirk(void) · line 325

Quoted 6 lines
drivers/usb/host/pci-quirks.c +6 -0
+bool usb_amd_quirk_pll_check(void)
+{
+     usb_amd_find_chipset_info();
+     return amd_chipset.need_pll_quirk;
+}
+EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_check);

I really don't see the point of separating out all but one line into a different function. You might as well just rename usb_amd_find_chipset_info to usb_amd_quirk_pll_check (along with the other code adjustments) and be done with it.

I did this for consistency with the others:

usb_amd_prefetch_quirk()
usb_amd_hang_symptom_quirk()
usb_hcd_amd_remote_wakeup_quirk()

They all need to ensure the chipset information exists then decide if the particular quirk should be applied to the chipset.

Ryan

Quoted 8 lines

However, in the end I don't care if you still want to do this. Either way:

Alan Stern