drm/i915/display/tgl: Bump up the mode vertical limits to support 8K
Subsystems (3)
PATCH 1/2 drm/i915/display/tgl: Bump up the mode vertical limits to support 8K
On TGL+ we support 8K display resolution, hence bump up the vertical active limits to 4320 in intel_mode_valid()
--- drivers/gpu/drm/i915/display/intel_display.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +7 -2
@@ -15764,8 +15764,13 @@ intel_mode_valid(struct drm_device *dev, DRM_MODE_FLAG_CLKDIV2))return MODE_BAD ; -if (INTEL_GEN (dev_priv) >=9 || -IS_BROADWELL (dev_priv) ||IS_HASWELL (dev_priv)) { +if (INTEL_GEN (dev_priv) >=12 ) { + hdisplay_max =8192 ; + vdisplay_max =4320 ; + htotal_max =8192 ; + vtotal_max =8192 ; + }else if (INTEL_GEN (dev_priv) >=9 || +IS_BROADWELL (dev_priv) ||IS_HASWELL (dev_priv)) { hdisplay_max =8192 ;/* FDI max 4096 handled elsewhere */ vdisplay_max =4096 ; htotal_max =8192 ;
Signature · 6 lines
2.19.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 2/2 drm/i915/display/tgl: Bump up the plane/fb height to support 8K
On TGL+, the plane height for 8K planes can be 4320, so bump it up To support 4320, we need to increase the number of bits used to read plane_height to 13 as opposed to older 12 bits.
--- drivers/gpu/drm/i915/display/intel_display.c | 21 ++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +19 -2
@@ -3343,6 +3343,16 @@ static int icl_max_plane_width(const struct drm_framebuffer *fb,return 5120 ; } +static int skl_max_plane_height (void ) +{ +return 4096 ; +} + +static int tgl_max_plane_height (void ) +{ +return 4320 ; +} +static bool skl_check_main_ccs_coordinates (struct intel_plane_state *plane_state,int main_x,int main_y,u32 main_offset) {
@@ -3391,9 +3401,13 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)int w =drm_rect_width (&plane_state->base.src) >>16 ;int h =drm_rect_height (&plane_state->base.src) >>16 ;int max_width; -int max_height =4096 ; +int max_height;u32 alignment, offset, aux_offset = plane_state->color_plane[1 ].offset; +if (INTEL_GEN (dev_priv) >=12 ) + max_height =tgl_max_plane_height (); +else + max_height =skl_max_plane_height ();if (INTEL_GEN (dev_priv) >=11 ) max_width =icl_max_plane_width (fb,0 , rotation);else if (INTEL_GEN (dev_priv) >=10 ||IS_GEMINILAKE (dev_priv))
@@ -9865,7 +9879,10 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc, offset =I915_READ (PLANE_OFFSET (pipe, plane_id)); val =I915_READ (PLANE_SIZE (pipe, plane_id)); - fb->height = ((val >>16 ) &0xfff ) +1 ; +if (INTEL_GEN (dev_priv) >=12 ) + fb->height = ((val >>16 ) &0x1fff ) +1 ; +else + fb->height = ((val >>16 ) &0xfff ) +1 ; fb->width = ((val >>0 ) &0x1fff ) +1 ; val =I915_READ (PLANE_STRIDE (pipe, plane_id));
Signature · 6 lines
2.19.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915/display/tgl: Bump up the plane/fb height to support 8K
Quoted 41 lines · Manasi Navare
On TGL+, the plane height for 8K planes can be 4320, so bump it up To support 4320, we need to increase the number of bits used to read
plane_heightto 13 as opposed to older 12 bits.Cc Maarten Lankhorst <[email protected]>Cc Ville Syrjälä <[email protected]>Signed-off-by Manasi Navare <[email protected]>--- drivers/gpu/drm/i915/display/intel_display.c | 21 ++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/display/intel_display.c +10
-0@@ -3343,6 +3343,16 @@ static int icl_max_plane_width(const structdrm_framebuffer *fb, return 5120; } +static int skl_max_plane_height (void ) +{ +return 4096 ; +} + +static int tgl_max_plane_height (void ) +{ +return 4320 ; +} + static bool skl_check_main_ccs_coordinates(struct intel_plane_state *plane_state,int
main_x, intmain_y, u32main_offset)
{drivers/gpu/drm/i915/display/intel_display.c +0
-0@@ -3391,9 +3401,13 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)int w =drm_rect_width (&plane_state->base.src) >>16 ;int h =drm_rect_height (&plane_state->base.src) >>16 ;
drivers/gpu/drm/i915/display/intel_display.c static int skl_check_main_surface(struct · line 3412
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +5
-1int max_width; -int max_height =4096 ; +int max_height;u32 alignment, offset, aux_offset = plane_state- >color_plane[1].offset; +if (INTEL_GEN (dev_priv) >=12 ) + max_height =tgl_max_plane_height (); +else + max_height =skl_max_plane_height ();
Give a line between max_width block, also I would move the height after the width.
Quoted 15 lines
drivers/gpu/drm/i915/display/intel_display.c +0
-0if (INTEL_GEN (dev_priv) >=11 )drivers/gpu/drm/i915/display/intel_display.c +4
-1max_width =icl_max_plane_width (fb,0 , rotation); else if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))@@ -9865,7 +9879,10 @@ skylake_get_initial_plane_config(structintel_crtc *crtc, offset =I915_READ (PLANE_OFFSET (pipe, plane_id)); val =I915_READ (PLANE_SIZE (pipe, plane_id)); - fb->height = ((val >>16 ) &0xfff ) +1 ; +if (INTEL_GEN (dev_priv) >=12 ) + fb->height = ((val >>16 ) &0x1fff ) +1 ; +else + fb->height = ((val >>16 ) &0xfff ) +1 ; fb->width = ((val >>0 ) &0x1fff ) +1 ;
Quoted 1 line
val =
I915_READ(PLANE_STRIDE(pipe, plane_id));
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915/display/tgl: Bump up the plane/fb height to support 8K
Quoted 48 lines · Jose
Quoted 47 lines · Manasi Navare
On TGL+, the plane height for 8K planes can be 4320, so bump it up To support 4320, we need to increase the number of bits used to read
plane_heightto 13 as opposed to older 12 bits.Cc Maarten Lankhorst <[email protected]>Cc Ville Syrjälä <[email protected]>Signed-off-by Manasi Navare <[email protected]>--- drivers/gpu/drm/i915/display/intel_display.c | 21 ++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/display/intel_display.c +10
-0@@ -3343,6 +3343,16 @@ static int icl_max_plane_width(const structdrm_framebuffer *fb, return 5120; } +static int skl_max_plane_height (void ) +{ +return 4096 ; +} + +static int tgl_max_plane_height (void ) +{ +return 4320 ; +} + static bool skl_check_main_ccs_coordinates(struct intel_plane_state *plane_state,int
main_x, intmain_y, u32main_offset)
{drivers/gpu/drm/i915/display/intel_display.c +1
-1@@ -3391,9 +3401,13 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)int w =drm_rect_width (&plane_state->base.src) >>16 ;int h =drm_rect_height (&plane_state->base.src) >>16 ;int max_width; -int max_height =4096 ; +int max_height;u32 alignment, offset, aux_offset = plane_state- >color_plane[1].offset;
Quoted 7 lines
drivers/gpu/drm/i915/display/intel_display.c static int skl_check_main_surface(struct intel_plane_state *plane_state) · line 3410
Quoted 4 lines
drivers/gpu/drm/i915/display/intel_display.c +4
-0+if (INTEL_GEN (dev_priv) >=12 ) + max_height =tgl_max_plane_height (); +else + max_height =skl_max_plane_height ();Give a line between
max_widthblock, also I would move the height after the width.
Ok, will make this change, can I add your r-b with this change?
Manasi
Quoted 16 lines
Quoted 16 lines
drivers/gpu/drm/i915/display/intel_display.c +0
-0if (INTEL_GEN (dev_priv) >=11 )drivers/gpu/drm/i915/display/intel_display.c +4
-1max_width =icl_max_plane_width (fb,0 , rotation); else if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))@@ -9865,7 +9879,10 @@ skylake_get_initial_plane_config(structintel_crtc *crtc, offset =I915_READ (PLANE_OFFSET (pipe, plane_id)); val =I915_READ (PLANE_SIZE (pipe, plane_id)); - fb->height = ((val >>16 ) &0xfff ) +1 ; +if (INTEL_GEN (dev_priv) >=12 ) + fb->height = ((val >>16 ) &0x1fff ) +1 ; +else + fb->height = ((val >>16 ) &0xfff ) +1 ; fb->width = ((val >>0 ) &0x1fff ) +1 ;
Quoted 1 line
Quoted 1 line
val =
I915_READ(PLANE_STRIDE(pipe, plane_id));
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915/display/tgl: Bump up the plane/fb height to support 8K
In reply to Manasi NavareQuoted 17 lines · Manasi Navare
On TGL+, the plane height for 8K planes can be 4320, so bump it up To support 4320, we need to increase the number of bits used to read
plane_heightto 13 as opposed to older 12 bits.Cc Maarten Lankhorst <[email protected]>Cc Ville Syrjälä <[email protected]>Signed-off-by Manasi Navare <[email protected]>--- drivers/gpu/drm/i915/display/intel_display.c | 21 ++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/display/intel_display.c +0
-0@@ -3343,6 +3343,16 @@ static int icl_max_plane_width(const struct drm_framebuffer *fb,return 5120 ;
drivers/gpu/drm/i915/display/intel_display.c static int icl_max_plane_width(const struct drm_framebuffer *fb, · line 3353
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +8
-0} +static int skl_max_plane_height (void ) +{ +return 4096 ; +} + +static int tgl_max_plane_height (void ) +{ +return 4320 ;
icl has this limit already.
Quoted 34 lines
drivers/gpu/drm/i915/display/intel_display.c +11
-2+} +static bool skl_check_main_ccs_coordinates (struct intel_plane_state *plane_state,int main_x,int main_y,u32 main_offset) {@@ -3391,9 +3401,13 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)int w =drm_rect_width (&plane_state->base.src) >>16 ;int h =drm_rect_height (&plane_state->base.src) >>16 ;int max_width; -int max_height =4096 ; +int max_height;u32 alignment, offset, aux_offset = plane_state->color_plane[1 ].offset; +if (INTEL_GEN (dev_priv) >=12 ) + max_height =tgl_max_plane_height (); +else + max_height =skl_max_plane_height ();if (INTEL_GEN (dev_priv) >=11 ) max_width =icl_max_plane_width (fb,0 , rotation);else if (INTEL_GEN (dev_priv) >=10 ||IS_GEMINILAKE (dev_priv))@@ -9865,7 +9879,10 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc, offset =I915_READ (PLANE_OFFSET (pipe, plane_id)); val =I915_READ (PLANE_SIZE (pipe, plane_id)); - fb->height = ((val >>16 ) &0xfff ) +1 ; +if (INTEL_GEN (dev_priv) >=12 ) + fb->height = ((val >>16 ) &0x1fff ) +1 ; +else + fb->height = ((val >>16 ) &0xfff ) +1 ; fb->width = ((val >>0 ) &0x1fff ) +1 ; val =I915_READ (PLANE_STRIDE (pipe, plane_id));Signature · 1 line
2.19.1
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915/display/tgl: Bump up the plane/fb height to support 8K
Quoted 20 lines · Ville Syrjälä
Quoted 19 lines · Manasi Navare
On TGL+, the plane height for 8K planes can be 4320, so bump it up To support 4320, we need to increase the number of bits used to read
plane_heightto 13 as opposed to older 12 bits.Cc Maarten Lankhorst <[email protected]>Cc Ville Syrjälä <[email protected]>Signed-off-by Manasi Navare <[email protected]>--- drivers/gpu/drm/i915/display/intel_display.c | 21 ++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/display/intel_display.c +0
-0@@ -3343,6 +3343,16 @@ static int icl_max_plane_width(const struct drm_framebuffer *fb,return 5120 ; }
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_display.c static int icl_max_plane_width(const struct drm_framebuffer *fb, · line 3353
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_display.c +8
-0+static int skl_max_plane_height (void ) +{ +return 4096 ; +} + +static int tgl_max_plane_height (void ) +{ +return 4320 ;
Yes icl does but we start supporting 8K from tgl, should this be changed to icl_max_plane_height() and return 4320?
Manasi
Quoted 34 lines
icl has this limit already.
Quoted 31 lines
drivers/gpu/drm/i915/display/intel_display.c +11
-2+} +static bool skl_check_main_ccs_coordinates (struct intel_plane_state *plane_state,int main_x,int main_y,u32 main_offset) {@@ -3391,9 +3401,13 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)int w =drm_rect_width (&plane_state->base.src) >>16 ;int h =drm_rect_height (&plane_state->base.src) >>16 ;int max_width; -int max_height =4096 ; +int max_height;u32 alignment, offset, aux_offset = plane_state->color_plane[1 ].offset; +if (INTEL_GEN (dev_priv) >=12 ) + max_height =tgl_max_plane_height (); +else + max_height =skl_max_plane_height ();if (INTEL_GEN (dev_priv) >=11 ) max_width =icl_max_plane_width (fb,0 , rotation);else if (INTEL_GEN (dev_priv) >=10 ||IS_GEMINILAKE (dev_priv))@@ -9865,7 +9879,10 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc, offset =I915_READ (PLANE_OFFSET (pipe, plane_id)); val =I915_READ (PLANE_SIZE (pipe, plane_id)); - fb->height = ((val >>16 ) &0xfff ) +1 ; +if (INTEL_GEN (dev_priv) >=12 ) + fb->height = ((val >>16 ) &0x1fff ) +1 ; +else + fb->height = ((val >>16 ) &0xfff ) +1 ; fb->width = ((val >>0 ) &0x1fff ) +1 ;
Quoted 7 lines
Quoted 3 lines
drivers/gpu/drm/i915/display/intel_display.c +0
-0val =I915_READ (PLANE_STRIDE (pipe, plane_id));Signature · 1 line
2.19.1Signature · 2 lines
Ville Syrjälä Intel
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for series starting with [1/2] drm/i915/display/tgl: Bump up the mode vertical limits to support 8K
In reply to Manasi Navare== Series Details ==
== Series Details ==
Series: series starting with [1/2] drm/i915/display/tgl: Bump up the mode vertical limits to support 8K
URL : https://patchwork.freedesktop.org/series/63458/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip
90e13413f8fd drm/i915/display/tgl: Bump up the mode vertical limits to support 8K
-:27: ERROR:SPACING: spaces required around that '>=' (ctx:WxV)
#27: FILE: drivers/gpu/drm/i915/display/intel_display.c:15767:
+ if (INTEL_GEN(dev_priv) >=12) {
^total: 1 errors, 0 warnings, 0 checks, 15 lines checked dc819529058c drm/i915/display/tgl: Bump up the plane/fb height to support 8K
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for series starting with [1/2] drm/i915/display/tgl: Bump up the mode vertical limits to support 8K
In reply to Manasi Navare== Series Details ==
== Series Details ==
Series: series starting with [1/2] drm/i915/display/tgl: Bump up the mode vertical limits to support 8K
URL : https://patchwork.freedesktop.org/series/63458/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_6446 -> Patchwork_13591
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13591/
Known issues
------------
Here are the changes found in Patchwork_13591 that come from known issues:
### IGT changes ###
#### Possible fixes ####
* {igt@gem_ctx_switch@legacy-render}:
- fi-cml-u: [INCOMPLETE][1] ([fdo#110566]) -> [PASS][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/fi-cml-u/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13591/fi-cml-u/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#109485]: https://bugs.freedesktop.org/show_bug.cgi?id=109485
[fdo#110566]: https://bugs.freedesktop.org/show_bug.cgi?id=110566
[fdo#111045]: https://bugs.freedesktop.org/show_bug.cgi?id=111045
[fdo#111046 ]: https://bugs.freedesktop.org/show_bug.cgi?id=111046
Participating hosts (51 -> 46)
------------------------------
Additional (2): fi-byt-j1900 fi-snb-2600
Missing (7): fi-kbl-soraka fi-hsw-4770r fi-byt-squawks fi-bsw-cyan fi-icl-y fi-byt-clapper fi-bdw-samus
Build changes
-------------
* Linux: CI_DRM_6446 -> Patchwork_13591
CI_DRM_6446: 835fbe24abe47946fc514871f5cbe334d0be9854 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5092: 2a66ae6626d5583240509f84117d1345a799b75a @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_13591: dc819529058c1e30cee0b2f6928c72ae2df15cde @ git://anongit.freedesktop.org/gfx-ci/linux
== Kernel 32bit build ==
Warning: Kernel 32bit buildtest failed:
https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13591/build_32bit.log
CALL scripts/checksyscalls.sh CALL scripts/atomic/check-atomics.sh CHK include/generated/compile.h
Kernel: arch/x86/boot/bzImage is ready (#1)
Building modules, stage 2.
MODPOST 112 modules
ERROR: "__udivdi3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: "__divdi3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! scripts/Makefile.modpost:91: recipe for target '__modpost' failed make[1]: *** [__modpost] Error 1
Makefile:1287: recipe for target 'modules' failed
make: *** [modules] Error 2
== Linux commits ==
dc819529058c drm/i915/display/tgl: Bump up the plane/fb height to support 8K 90e13413f8fd drm/i915/display/tgl: Bump up the mode vertical limits to support 8K
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13591/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 16 lines · Manasi Navare
On TGL+ we support 8K display resolution, hence bump up the vertical active limits to 4320 in
intel_mode_valid()Cc Maarten Lankhorst <[email protected]>Cc Ville Syrjälä <[email protected]>Signed-off-by Manasi Navare <[email protected]>--- drivers/gpu/drm/i915/display/intel_display.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/display/intel_display.c +0
-0
drivers/gpu/drm/i915/display/intel_display.c intel_mode_valid(struct drm_device *dev, · line 15767
Quoted 6 lines
drivers/gpu/drm/i915/display/intel_display.c +1
-2@@ -15764,8 +15764,13 @@ intel_mode_valid(struct drm_device *dev, DRM_MODE_FLAG_CLKDIV2))return MODE_BAD ; -if (INTEL_GEN (dev_priv) >=9 || -IS_BROADWELL (dev_priv) ||IS_HASWELL (dev_priv)) { +if (INTEL_GEN (dev_priv) >=12 ) {
if (INTEL_GEN(dev_priv) >= 12) {
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +6
-0+ hdisplay_max =8192 ; + vdisplay_max =4320 ; + htotal_max =8192 ; + vtotal_max =8192 ; + }else if (INTEL_GEN (dev_priv) >=9 || +IS_BROADWELL (dev_priv) ||IS_HASWELL (dev_priv)) { hdisplay_max =8192 ;/* FDI max 4096 handled elsewhere */ vdisplay_max =4096 ;
htotal_max= 8192;
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 20 lines · Jose
Quoted 19 lines · Manasi Navare
On TGL+ we support 8K display resolution, hence bump up the vertical active limits to 4320 in
intel_mode_valid()Cc Maarten Lankhorst <[email protected]>Cc Ville Syrjälä <[email protected]>Signed-off-by Manasi Navare <[email protected]>--- drivers/gpu/drm/i915/display/intel_display.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/display/intel_display.c +0
-0@@ -15764,8 +15764,13 @@ intel_mode_valid(struct drm_device *dev, DRM_MODE_FLAG_CLKDIV2))return MODE_BAD ;
Quoted 6 lines
drivers/gpu/drm/i915/display/intel_display.c intel_mode_valid(struct drm_device *dev, · line 15767
Quoted 3 lines
drivers/gpu/drm/i915/display/intel_display.c +1
-2-if (INTEL_GEN (dev_priv) >=9 || -IS_BROADWELL (dev_priv) ||IS_HASWELL (dev_priv)) { +if (INTEL_GEN (dev_priv) >=12 ) {if (
INTEL_GEN(dev_priv)>= 12) {
Yup already made this change in v2, r-b with this change?
Manasi
Quoted 11 lines
Quoted 11 lines
drivers/gpu/drm/i915/display/intel_display.c +6
-0+ hdisplay_max =8192 ; + vdisplay_max =4320 ; + htotal_max =8192 ; + vtotal_max =8192 ; + }else if (INTEL_GEN (dev_priv) >=9 || +IS_BROADWELL (dev_priv) ||IS_HASWELL (dev_priv)) { hdisplay_max =8192 ;/* FDI max 4096 handled elsewhere */ vdisplay_max =4096 ;
htotal_max= 8192;
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 1/1 drm/i915/display/tgl: Bump up the mode vertical limits to support 8K
In reply to Manasi NavareOn TGL+ we support 8K display resolution, hence bump up the vertical active limits to 4320 in intel_mode_valid()
v2:
* Checkpatch warning (Manasi)
--- drivers/gpu/drm/i915/display/intel_display.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +7 -2
@@ -15764,8 +15764,13 @@ intel_mode_valid(struct drm_device *dev, DRM_MODE_FLAG_CLKDIV2))return MODE_BAD ; -if (INTEL_GEN (dev_priv) >=9 || -IS_BROADWELL (dev_priv) ||IS_HASWELL (dev_priv)) { +if (INTEL_GEN (dev_priv) >=12 ) { + hdisplay_max =8192 ; + vdisplay_max =4320 ; + htotal_max =8192 ; + vtotal_max =8192 ; + }else if (INTEL_GEN (dev_priv) >=9 || +IS_BROADWELL (dev_priv) ||IS_HASWELL (dev_priv)) { hdisplay_max =8192 ;/* FDI max 4096 handled elsewhere */ vdisplay_max =4096 ; htotal_max =8192 ;
Signature · 6 lines
2.19.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 18 lines · Manasi Navare
On TGL+ we support 8K display resolution, hence bump up the vertical active limits to 4320 in
intel_mode_valid()v2:
* Checkpatch warning (Manasi)Cc Maarten Lankhorst <[email protected]>Cc Ville Syrjälä <[email protected]>Signed-off-by Manasi Navare <[email protected]>--- drivers/gpu/drm/i915/display/intel_display.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/display/intel_display.c +0
-0
drivers/gpu/drm/i915/display/intel_display.c intel_mode_valid(struct drm_device *dev, · line 15771
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +5
-2@@ -15764,8 +15764,13 @@ intel_mode_valid(struct drm_device *dev, DRM_MODE_FLAG_CLKDIV2))return MODE_BAD ; -if (INTEL_GEN (dev_priv) >=9 || -IS_BROADWELL (dev_priv) ||IS_HASWELL (dev_priv)) { +if (INTEL_GEN (dev_priv) >=12 ) { + hdisplay_max =8192 ; + vdisplay_max =4320 ; + htotal_max =8192 ; + vtotal_max =8192 ;
I wonder if we can safely bump these before we get the joiner stuff sorted. Hmm. I guess it should be fine as the limit that is supposed to overcome is caused by the cdclk max frequency being too low to allow a single pipe to push enough pixels. And since we check that in .mode_valid() we shouldn't accidentally start to advertize support for modes we can't do.
Which means these limits should actually be higher than this. 16k for htotal+hdisplay and 8k for vtotal+vdisplay already on icl I believe.
Quoted 7 lines
drivers/gpu/drm/i915/display/intel_display.c +2
-0+ }else if (INTEL_GEN (dev_priv) >=9 || +IS_BROADWELL (dev_priv) ||IS_HASWELL (dev_priv)) { hdisplay_max =8192 ;/* FDI max 4096 handled elsewhere */ vdisplay_max =4096 ; htotal_max =8192 ;Signature · 1 line
2.19.1
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 22 lines · Ville Syrjälä
Quoted 21 lines · Manasi Navare
On TGL+ we support 8K display resolution, hence bump up the vertical active limits to 4320 in
intel_mode_valid()v2:
* Checkpatch warning (Manasi)Cc Maarten Lankhorst <[email protected]>Cc Ville Syrjälä <[email protected]>Signed-off-by Manasi Navare <[email protected]>--- drivers/gpu/drm/i915/display/intel_display.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/display/intel_display.c +0
-0@@ -15764,8 +15764,13 @@ intel_mode_valid(struct drm_device *dev, DRM_MODE_FLAG_CLKDIV2))return MODE_BAD ;
Quoted 13 lines
drivers/gpu/drm/i915/display/intel_display.c intel_mode_valid(struct drm_device *dev, · line 15771
Quoted 7 lines
drivers/gpu/drm/i915/display/intel_display.c +5
-2-if (INTEL_GEN (dev_priv) >=9 || -IS_BROADWELL (dev_priv) ||IS_HASWELL (dev_priv)) { +if (INTEL_GEN (dev_priv) >=12 ) { + hdisplay_max =8192 ; + vdisplay_max =4320 ; + htotal_max =8192 ; + vtotal_max =8192 ;I wonder if we can safely bump these before we get the joiner stuff sorted. Hmm. I guess it should be fine as the limit that is supposed to overcome is caused by the cdclk max frequency being too low to allow a single pipe to push enough pixels. And since we check that in .mode_valid() we shouldn't accidentally start to advertize support for modes we can't do.
Yes the intel_dp_mode_valid() will still reject the modes until we have the support for big joiner, so allowing these limits should be fine here.
Same for the plane size limits. Plane size limits bumping up is also needed in case of tiled 8K display with transcdoer port sync
Quoted 3 lines
Which means these limits should actually be higher than this. 16k for htotal+hdisplay and 8k for vtotal+vdisplay already on icl I believe.
Where do we set htotal+hdisplay? And I added this for tgl, since we would be supporting the 8K res only on tgl onwards, correct?
Manasi
Quoted 12 lines
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_display.c +2
-0+ }else if (INTEL_GEN (dev_priv) >=9 || +IS_BROADWELL (dev_priv) ||IS_HASWELL (dev_priv)) { hdisplay_max =8192 ;/* FDI max 4096 handled elsewhere */ vdisplay_max =4096 ; htotal_max =8192 ;Signature · 1 line
2.19.1Signature · 2 lines
Ville Syrjälä Intel
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 44 lines · Manasi Navare
Quoted 22 lines · Ville Syrjälä
Quoted 21 lines · Manasi Navare
On TGL+ we support 8K display resolution, hence bump up the vertical active limits to 4320 in
intel_mode_valid()v2:
* Checkpatch warning (Manasi)Cc Maarten Lankhorst <[email protected]>Cc Ville Syrjälä <[email protected]>Signed-off-by Manasi Navare <[email protected]>--- drivers/gpu/drm/i915/display/intel_display.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/display/intel_display.c +0
-0@@ -15764,8 +15764,13 @@ intel_mode_valid(struct drm_device *dev, DRM_MODE_FLAG_CLKDIV2))return MODE_BAD ;Quoted 13 lines
drivers/gpu/drm/i915/display/intel_display.c intel_mode_valid(struct drm_device *dev, · line 15771
Quoted 7 lines
drivers/gpu/drm/i915/display/intel_display.c +5
-2-if (INTEL_GEN (dev_priv) >=9 || -IS_BROADWELL (dev_priv) ||IS_HASWELL (dev_priv)) { +if (INTEL_GEN (dev_priv) >=12 ) { + hdisplay_max =8192 ; + vdisplay_max =4320 ; + htotal_max =8192 ; + vtotal_max =8192 ;I wonder if we can safely bump these before we get the joiner stuff sorted. Hmm. I guess it should be fine as the limit that is supposed to overcome is caused by the cdclk max frequency being too low to allow a single pipe to push enough pixels. And since we check that in .mode_valid() we shouldn't accidentally start to advertize support for modes we can't do.
Yes the
intel_dp_mode_valid()will still reject the modes until we have the support for big joiner, so allowing these limits should be fine here.Same for the plane size limits. Plane size limits bumping up is also needed in case of tiled 8K display with transcdoer port sync
Quoted 1 line
Quoted 5 lines
Quoted 2 lines
Which means these limits should actually be higher than this. 16k for htotal+hdisplay and 8k for vtotal+vdisplay already on icl I believe.
Where do we set htotal+hdisplay? And I added this for tgl, since we would be supporting the 8K res only on tgl onwards, correct?
We can do 8k on earlier platforms too, assuming the clock is low enough. Also icl already can do the joining stuff no?
Anwyays these number are just the straight up transcoder max timings from the spec, and that's what I think they should stay. If we need to impose some other arbitrary limits for other reasons we should do that separately.
Hmm. I guess planes is the other thing that's a problem for 8k and such. The documented max width is too small for any single plane to cover such a big pipe. We should perhaps be validating modes against the plane limits as well...
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for series starting with [v2] drm/i915/display/tgl: Bump up the mode vertical limits to support 8K (rev2)
In reply to Manasi Navare== Series Details ==
== Series Details ==
Series: series starting with [v2] drm/i915/display/tgl: Bump up the mode vertical limits to support 8K (rev2)
URL : https://patchwork.freedesktop.org/series/63458/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_6446 -> Patchwork_13593
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/
Known issues
------------
Here are the changes found in Patchwork_13593 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_flink_basic@bad-open:
- fi-icl-u3: [PASS][1] -> [DMESG-WARN][2] ([fdo#107724])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/fi-icl-u3/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/fi-icl-u3/igt@[email protected]
* igt@prime_self_import@basic-with_one_bo:
- fi-icl-dsi: [PASS][3] -> [INCOMPLETE][4] ([fdo#107713])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/fi-icl-dsi/igt@prime_self_import@basic-with_one_bo.html
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/fi-icl-dsi/igt@prime_self_import@basic-with_one_bo.html
#### Possible fixes ####
* {igt@gem_ctx_switch@legacy-render}:
- fi-cml-u: [INCOMPLETE][5] ([fdo#110566]) -> [PASS][6]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/fi-cml-u/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/fi-cml-u/igt@[email protected]
* igt@kms_chamelium@hdmi-hpd-fast:
- fi-kbl-7500u: [FAIL][7] ([fdo#109485]) -> [PASS][8]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/fi-kbl-7500u/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/fi-kbl-7500u/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#107724]: https://bugs.freedesktop.org/show_bug.cgi?id=107724
[fdo#109485]: https://bugs.freedesktop.org/show_bug.cgi?id=109485
[fdo#110566]: https://bugs.freedesktop.org/show_bug.cgi?id=110566
[fdo#111046 ]: https://bugs.freedesktop.org/show_bug.cgi?id=111046
Participating hosts (51 -> 46)
------------------------------
Additional (2): fi-byt-j1900 fi-snb-2600
Missing (7): fi-kbl-soraka fi-byt-squawks fi-bsw-cyan fi-icl-y fi-icl-guc fi-byt-clapper fi-bdw-samus
Build changes
-------------
* Linux: CI_DRM_6446 -> Patchwork_13593
CI_DRM_6446: 835fbe24abe47946fc514871f5cbe334d0be9854 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5092: 2a66ae6626d5583240509f84117d1345a799b75a @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_13593: a537b92522385cda1cfb1400f1c9d29f11cb3b6b @ git://anongit.freedesktop.org/gfx-ci/linux
== Kernel 32bit build ==
Warning: Kernel 32bit buildtest failed:
https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/build_32bit.log
CALL scripts/checksyscalls.sh CALL scripts/atomic/check-atomics.sh CHK include/generated/compile.h
Kernel: arch/x86/boot/bzImage is ready (#1)
Building modules, stage 2.
MODPOST 112 modules
ERROR: "__udivdi3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: "__divdi3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! scripts/Makefile.modpost:91: recipe for target '__modpost' failed make[1]: *** [__modpost] Error 1
Makefile:1287: recipe for target 'modules' failed
make: *** [modules] Error 2
== Linux commits ==
a537b9252238 drm/i915/display/tgl: Bump up the plane/fb height to support 8K ed957eb65698 drm/i915/display/tgl: Bump up the mode vertical limits to support 8K
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for series starting with [v2] drm/i915/display/tgl: Bump up the mode vertical limits to support 8K (rev2)
In reply to Manasi Navare== Series Details ==
== Series Details ==
Series: series starting with [v2] drm/i915/display/tgl: Bump up the mode vertical limits to support 8K (rev2)
URL : https://patchwork.freedesktop.org/series/63458/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_6446_full -> Patchwork_13593_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
Known issues
------------
Here are the changes found in Patchwork_13593_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@i915_suspend@fence-restore-tiled2untiled:
- shard-apl: [PASS][1] -> [DMESG-WARN][2] ([fdo#108566]) +4 similar issues
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-apl7/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-apl7/igt@[email protected]
* igt@kms_busy@basic-modeset-a:
- shard-iclb: [PASS][3] -> [INCOMPLETE][4] ([fdo#107713])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-iclb6/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-iclb1/igt@[email protected]
* igt@kms_color@pipe-b-ctm-red-to-blue:
- shard-skl: [PASS][5] -> [FAIL][6] ([fdo#107201])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-skl1/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-skl5/igt@[email protected]
* igt@kms_cursor_legacy@short-flip-before-cursor-toggle:
- shard-snb: [PASS][7] -> [SKIP][8] ([fdo#109271])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-snb5/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-snb2/igt@[email protected]
* igt@kms_flip@flip-vs-expired-vblank:
- shard-skl: [PASS][9] -> [FAIL][10] ([fdo#105363]) +1 similar issue
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-skl6/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-skl8/igt@[email protected]
* igt@kms_flip_tiling@flip-changes-tiling-yf:
- shard-skl: [PASS][11] -> [FAIL][12] ([fdo#108228] / [fdo#108303])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-skl3/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-skl3/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-mmap-cpu:
- shard-iclb: [PASS][13] -> [FAIL][14] ([fdo#103167]) +2 similar issues
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-iclb3/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-mmap-cpu.html
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-iclb2/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-mmap-cpu.html
* igt@kms_plane_alpha_blend@pipe-b-constant-alpha-min:
- shard-skl: [PASS][15] -> [FAIL][16] ([fdo#108145])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-skl1/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-skl5/igt@[email protected]
* igt@kms_psr@psr2_suspend:
- shard-iclb: [PASS][17] -> [SKIP][18] ([fdo#109441]) +1 similar issue
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-iclb2/igt@kms_psr@psr2_suspend.html
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-iclb3/igt@kms_psr@psr2_suspend.html
* igt@kms_setmode@basic:
- shard-kbl: [PASS][19] -> [FAIL][20] ([fdo#99912])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-kbl1/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-kbl6/igt@[email protected]
#### Possible fixes ####
* igt@i915_pm_rpm@debugfs-read:
- shard-skl: [INCOMPLETE][21] ([fdo#107807]) -> [PASS][22]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-skl5/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-skl3/igt@[email protected]
* igt@kms_cursor_crc@pipe-a-cursor-128x42-random:
- shard-apl: [INCOMPLETE][23] ([fdo#103927]) -> [PASS][24]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-apl7/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-apl5/igt@[email protected]
* igt@kms_flip@flip-vs-suspend-interruptible:
- shard-apl: [DMESG-WARN][25] ([fdo#108566]) -> [PASS][26] +4 similar issues
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-apl2/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-apl3/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-1p-offscren-pri-shrfb-draw-pwrite:
- shard-iclb: [FAIL][27] ([fdo#103167]) -> [PASS][28] +3 similar issues
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-iclb8/igt@kms_frontbuffer_tracking@fbc-1p-offscren-pri-shrfb-draw-pwrite.html
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-iclb6/igt@kms_frontbuffer_tracking@fbc-1p-offscren-pri-shrfb-draw-pwrite.html
* igt@kms_psr@no_drrs:
- shard-iclb: [FAIL][29] ([fdo#108341]) -> [PASS][30]
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-iclb1/igt@kms_psr@no_drrs.html
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-iclb3/igt@kms_psr@no_drrs.html
* igt@kms_psr@psr2_sprite_mmap_gtt:
- shard-iclb: [SKIP][31] ([fdo#109441]) -> [PASS][32] +4 similar issues
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-iclb3/igt@kms_psr@psr2_sprite_mmap_gtt.html
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-iclb2/igt@kms_psr@psr2_sprite_mmap_gtt.html
* igt@kms_setmode@basic:
- shard-apl: [FAIL][33] ([fdo#99912]) -> [PASS][34]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6446/shard-apl8/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/shard-apl5/igt@[email protected]
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#105363]: https://bugs.freedesktop.org/show_bug.cgi?id=105363
[fdo#107201]: https://bugs.freedesktop.org/show_bug.cgi?id=107201
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#107807]: https://bugs.freedesktop.org/show_bug.cgi?id=107807
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#108228]: https://bugs.freedesktop.org/show_bug.cgi?id=108228
[fdo#108303]: https://bugs.freedesktop.org/show_bug.cgi?id=108303
[fdo#108341]: https://bugs.freedesktop.org/show_bug.cgi?id=108341
[fdo#108566]: https://bugs.freedesktop.org/show_bug.cgi?id=108566
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912
Participating hosts (10 -> 10)
------------------------------
No changes in participating hosts
Build changes
-------------
* Linux: CI_DRM_6446 -> Patchwork_13593
CI_DRM_6446: 835fbe24abe47946fc514871f5cbe334d0be9854 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5092: 2a66ae6626d5583240509f84117d1345a799b75a @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_13593: a537b92522385cda1cfb1400f1c9d29f11cb3b6b @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13593/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx