device-tree: bindinds: add NXP PCT2075 as compatible device to LM75
Subsystems (2)
PATCH 1/2 device-tree: bindinds: add NXP PCT2075 as compatible device to LM75
The PCT2075 is compatible to other chips that are already handled by the LM75 driver.
--- Documentation/devicetree/bindings/hwmon/lm75.txt | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/hwmon/lm75.txt +1 -0
@@ -15,6 +15,7 @@ Required properties: "maxim,max31725", "maxim,max31726", "maxim,mcp980x", + "nxp,pct2075", "st,stds75", "st,stlm75", "microchip,tcn75",
Signature · 1 line
2.21.0
PATCH 2/2 drivers: hwmon: lm75: add support for PCT2075
The NXP PCT2075 is largely compatible with other chips already supported by the LM75 driver. It uses an 11-bit resolution and defaults to 100 ms sampling period. The datasheet is here:
https://www.nxp.com/docs/en/data-sheet/PCT2075.pdf
--- drivers/hwmon/lm75.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
drivers/hwmon/lm75.c +10 -0
@@ -49,6 +49,7 @@ enum lm75_type { /* keep sorted in alphabetical order */ max6626, max31725, mcp980x, + pct2075, stds75, stlm75, tcn75,
@@ -353,6 +354,10 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id) data->resolution =9 ; data->sample_time =MSEC_PER_SEC /8 ;break ; +case pct2075: + data->resolution =11 ; + data->sample_time =MSEC_PER_SEC /10 ; +break ;case mcp980x: data->resolution_limits =9 ;/* fall through */
@@ -428,6 +433,7 @@ static const struct i2c_device_id lm75_ids[] = { { "max31725", max31725, }, { "max31726", max31725, }, { "mcp980x", mcp980x, }, + { "pct2075", pct2075, }, { "stds75", stds75, }, { "stlm75", stlm75, }, { "tcn75", tcn75, },
@@ -496,6 +502,10 @@ static const struct of_device_id lm75_of_match[] = { .compatible = "maxim,mcp980x", .data = (void *)mcp980x }, + { + .compatible = "nxp,pct2075", + .data = (void *)pct2075 + }, { .compatible ="st,stds75" , .data = (void *)stds75
Signature · 1 line
2.21.0
Quoted 4 lines · Daniel Mack
The PCT2075 is compatible to other chips that are already handled by the LM75 driver.
Signed-off-by Daniel Mack <[email protected]>
Applied to hwmon-next.
Thanks,
Guenter
Quoted 16 lines
--- Documentation/devicetree/bindings/hwmon/lm75.txt | 1 + 1 file changed, 1 insertion(+)Documentation/devicetree/bindings/hwmon/lm75.txt +1
-0@@ -15,6 +15,7 @@ Required properties: "maxim,max31725", "maxim,max31726", "maxim,mcp980x", + "nxp,pct2075", "st,stds75", "st,stlm75", "microchip,tcn75",
Re: [PATCH 2/2] drivers: hwmon: lm75: add support for PCT2075
In reply to Daniel MackQuoted 7 lines · Daniel Mack
The NXP PCT2075 is largely compatible with other chips already supported by the LM75 driver. It uses an 11-bit resolution and defaults to 100 ms sampling period. The datasheet is here:
https://www.nxp.com/docs/en/data-sheet/PCT2075.pdf
Signed-off-by Daniel Mack <[email protected]>
Applied to hwmon-next. Note that I also updated Documentation/hwmon/lm75.rst.
Guenter
Quoted 46 lines
--- drivers/hwmon/lm75.c | 10 ++++++++++ 1 file changed, 10 insertions(+)drivers/hwmon/lm75.c +10
-0@@ -49,6 +49,7 @@ enum lm75_type { /* keep sorted in alphabetical order */ max6626, max31725, mcp980x, + pct2075, stds75, stlm75, tcn75,@@ -353,6 +354,10 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id) data->resolution =9 ; data->sample_time =MSEC_PER_SEC /8 ;break ; +case pct2075: + data->resolution =11 ; + data->sample_time =MSEC_PER_SEC /10 ; +break ;case mcp980x: data->resolution_limits =9 ;/* fall through */ @@ -428,6 +433,7 @@ static const struct i2c_device_id lm75_ids[] = { { "max31725", max31725, }, { "max31726", max31725, }, { "mcp980x", mcp980x, }, + { "pct2075", pct2075, }, { "stds75", stds75, }, { "stlm75", stlm75, }, { "tcn75", tcn75, },@@ -496,6 +502,10 @@ static const struct of_device_id lm75_of_match[] = { .compatible = "maxim,mcp980x", .data = (void *)mcp980x }, + { + .compatible = "nxp,pct2075", + .data = (void *)pct2075 + }, { .compatible ="st,stds75" , .data = (void *)stds75