selftests/bpf: fix compiling loop{1,2,3}.c on s390
Subsystems (5)
v4 cover selftests/bpf: fix compiling loop{1,2,3}.c on s390
Use PT_REGS_RC(ctx) instead of ctx->rax, which is not present on s390.
This patch series consists of three preparatory commits, which make it possible to use PT_REGS_RC in BPF selftests, followed by the actual fix.
Quoted 3 lines
Quoted 1 line
Will this also work for 32-bit x86?
Thanks, this is a good catch: this builds, but makes 64-bit accesses, as if it used the 64-bit variant of
pt_regs. I will fix this.
I found four problems in this area:
1. Selftest tracing progs are built with -target bpf, leading to struct pt_regs and friends being interpreted incorrectly.
2. When the Makefile is adjusted to build them without -target bpf, it still lacks -m32/-m64, leading to a similar issue.
3. There is no __i386__ define, leading to incorrect userspace struct pt_regs variant being chosen for x86.
4. Finally, there is an issue in my patch: when 1-3 are fixed, it fails to build, since i386 defines yet another set of field names.
I will send fixes for problems 1-3 separately, I believe for this patch series to be correct, it's enough to fix #4 (which I did by adding another #ifdef).
I've also changed ARCH to SRCARCH in patch #1, since while ARCH can be e.g. "i386", SRCARCH always corresponds to directory names under arch/.
v1->v2: Split into multiple patches.v2->v3: Added arm64 support.v3->v4: Added i386 support, use SRCARCH instead of ARCH.
PATCH v4 1/4 selftests/bpf: compile progs with -D__TARGET_ARCH_$(SRCARCH)
This opens up the possibility of accessing registers in an arch-independent way.
--- tools/testing/selftests/bpf/Makefile | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
tools/testing/selftests/bpf/Makefile +3 -1
@@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 +include ../../../scripts/Makefile.arch LIBDIR := ../../../lib BPFDIR := $(LIBDIR)/bpf
@@ -138,7 +139,8 @@ CLANG_SYS_INCLUDES := $(shell $(CLANG) -v -E - </dev/null 2>&1 \ CLANG_FLAGS = -I. -I./include/uapi -I../../../include/uapi \ $(CLANG_SYS_INCLUDES) \ - -Wno-compare-distinct-pointer-types + -Wno-compare-distinct-pointer-types \ + -D__TARGET_ARCH_$(SRCARCH) $(OUTPUT)/test_l4lb_noinline.o: CLANG_FLAGS += -fno-inline $(OUTPUT)/test_xdp_noinline.o: CLANG_FLAGS += -fno-inline
Signature · 1 line
2.21.0
PATCH v4 2/4 selftests/bpf: fix s930 -> s390 typo
In reply to Ilya LeoshkevichAlso check for __s390__ instead of __s390x__, just in case bpf_helpers.h is ever used by 32-bit userspace.
--- tools/testing/selftests/bpf/bpf_helpers.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
tools/testing/selftests/bpf/bpf_helpers.h +5 -5
@@ -315,8 +315,8 @@ static int (*bpf_skb_adjust_room)(void *ctx, __s32 len_diff, __u32 mode,#if defined(__TARGET_ARCH_x86)#define bpf_target_x86#define bpf_target_defined -#elif defined(__TARGET_ARCH_s930x) -#define bpf_target_s930x +#elif defined(__TARGET_ARCH_s390) +#define bpf_target_s390#define bpf_target_defined#elif defined(__TARGET_ARCH_arm)#define bpf_target_arm
@@ -341,8 +341,8 @@ static int (*bpf_skb_adjust_room)(void *ctx, __s32 len_diff, __u32 mode,#ifndef bpf_target_defined#if defined(__x86_64__)#define bpf_target_x86 -#elif defined(__s390x__) -#define bpf_target_s930x +#elif defined(__s390__) +#define bpf_target_s390#elif defined(__arm__)#define bpf_target_arm#elif defined(__aarch64__)
@@ -369,7 +369,7 @@ static int (*bpf_skb_adjust_room)(void *ctx, __s32 len_diff, __u32 mode,#define PT_REGS_SP (x) ((x)->sp)#define PT_REGS_IP (x) ((x)->ip) -#elif defined(bpf_target_s390x) +#elif defined(bpf_target_s390)#define PT_REGS_PARM1 (x) ((x)->gprs[2])#define PT_REGS_PARM2 (x) ((x)->gprs[3])
Signature · 1 line
2.21.0
PATCH v4 3/4 selftests/bpf: make PT_REGS_* work in userspace
In reply to Ilya LeoshkevichRight now, on certain architectures, these macros are usable only with kernel headers. This patch makes it possible to use them with userspace headers and, as a consequence, not only in BPF samples, but also in BPF selftests.
On s390, provide the forward declaration of struct pt_regs and cast it to user_pt_regs in PT_REGS_* macros. This is necessary, because instead of the full struct pt_regs, s390 exposes only its first member user_pt_regs to userspace, and bpf_helpers.h is used with both userspace (in selftests) and kernel (in samples) headers. It was added in commit 466698e654e8 ("s390/bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type").
Ditto on arm64.
On x86, provide userspace versions of PT_REGS_* macros. Unlike s390 and arm64, x86 provides struct pt_regs to both userspace and kernel, however, with different member names.
--- tools/testing/selftests/bpf/bpf_helpers.h | 75 +++++++++++++++++------ 1 file changed, 55 insertions(+), 20 deletions(-)
tools/testing/selftests/bpf/bpf_helpers.h +55 -20
@@ -358,6 +358,7 @@ static int (*bpf_skb_adjust_room)(void *ctx, __s32 len_diff, __u32 mode,#if defined(bpf_target_x86) +#ifdef __KERNEL__#define PT_REGS_PARM1 (x) ((x)->di)#define PT_REGS_PARM2 (x) ((x)->si)#define PT_REGS_PARM3 (x) ((x)->dx)
@@ -368,19 +369,49 @@ static int (*bpf_skb_adjust_room)(void *ctx, __s32 len_diff, __u32 mode,#define PT_REGS_RC (x) ((x)->ax)#define PT_REGS_SP (x) ((x)->sp)#define PT_REGS_IP (x) ((x)->ip) +#else +#ifdef __i386__ +/* i386 kernel is built with -mregparm=3 */ +#define PT_REGS_PARM1 (x) ((x)->eax) +#define PT_REGS_PARM2 (x) ((x)->edx) +#define PT_REGS_PARM3 (x) ((x)->ecx) +#define PT_REGS_PARM4 (x) 0 +#define PT_REGS_PARM5 (x) 0 +#define PT_REGS_RET (x) ((x)->esp) +#define PT_REGS_FP (x) ((x)->ebp) +#define PT_REGS_RC (x) ((x)->eax) +#define PT_REGS_SP (x) ((x)->esp) +#define PT_REGS_IP (x) ((x)->eip) +#else +#define PT_REGS_PARM1 (x) ((x)->rdi) +#define PT_REGS_PARM2 (x) ((x)->rsi) +#define PT_REGS_PARM3 (x) ((x)->rdx) +#define PT_REGS_PARM4 (x) ((x)->rcx) +#define PT_REGS_PARM5 (x) ((x)->r8) +#define PT_REGS_RET (x) ((x)->rsp) +#define PT_REGS_FP (x) ((x)->rbp) +#define PT_REGS_RC (x) ((x)->rax) +#define PT_REGS_SP (x) ((x)->rsp) +#define PT_REGS_IP (x) ((x)->rip) +#endif +#endif #elif defined(bpf_target_s390) -#define PT_REGS_PARM1 (x) ((x)->gprs[2]) -#define PT_REGS_PARM2 (x) ((x)->gprs[3]) -#define PT_REGS_PARM3 (x) ((x)->gprs[4]) -#define PT_REGS_PARM4 (x) ((x)->gprs[5]) -#define PT_REGS_PARM5 (x) ((x)->gprs[6]) -#define PT_REGS_RET (x) ((x)->gprs[14]) -#define PT_REGS_FP (x) ((x)->gprs[11])/* Works only with CONFIG_FRAME_POINTER */ -#define PT_REGS_RC (x) ((x)->gprs[2]) -#define PT_REGS_SP (x) ((x)->gprs[15]) -#define PT_REGS_IP (x) ((x)->psw.addr) +/* s390 provides user_pt_regs instead of struct pt_regs to userspace */ +struct pt_regs ; +#define PT_REGS_S390 const volatile user_pt_regs +#define PT_REGS_PARM1 (x) (((PT_REGS_S390 *)(x))->gprs[2]) +#define PT_REGS_PARM2 (x) (((PT_REGS_S390 *)(x))->gprs[3]) +#define PT_REGS_PARM3 (x) (((PT_REGS_S390 *)(x))->gprs[4]) +#define PT_REGS_PARM4 (x) (((PT_REGS_S390 *)(x))->gprs[5]) +#define PT_REGS_PARM5 (x) (((PT_REGS_S390 *)(x))->gprs[6]) +#define PT_REGS_RET (x) (((PT_REGS_S390 *)(x))->gprs[14]) +/* Works only with CONFIG_FRAME_POINTER */ +#define PT_REGS_FP (x) (((PT_REGS_S390 *)(x))->gprs[11]) +#define PT_REGS_RC (x) (((PT_REGS_S390 *)(x))->gprs[2]) +#define PT_REGS_SP (x) (((PT_REGS_S390 *)(x))->gprs[15]) +#define PT_REGS_IP (x) (((PT_REGS_S390 *)(x))->psw.addr)#elif defined(bpf_target_arm)
@@ -397,16 +428,20 @@ static int (*bpf_skb_adjust_room)(void *ctx, __s32 len_diff, __u32 mode,#elif defined(bpf_target_arm64) -#define PT_REGS_PARM1 (x) ((x)->regs[0]) -#define PT_REGS_PARM2 (x) ((x)->regs[1]) -#define PT_REGS_PARM3 (x) ((x)->regs[2]) -#define PT_REGS_PARM4 (x) ((x)->regs[3]) -#define PT_REGS_PARM5 (x) ((x)->regs[4]) -#define PT_REGS_RET (x) ((x)->regs[30]) -#define PT_REGS_FP (x) ((x)->regs[29])/* Works only with CONFIG_FRAME_POINTER */ -#define PT_REGS_RC (x) ((x)->regs[0]) -#define PT_REGS_SP (x) ((x)->sp) -#define PT_REGS_IP (x) ((x)->pc) +/* arm64 provides struct user_pt_regs instead of struct pt_regs to userspace */ +struct pt_regs ; +#define PT_REGS_ARM64 const volatile struct user_pt_regs +#define PT_REGS_PARM1 (x) (((PT_REGS_ARM64 *)(x))->regs[0]) +#define PT_REGS_PARM2 (x) (((PT_REGS_ARM64 *)(x))->regs[1]) +#define PT_REGS_PARM3 (x) (((PT_REGS_ARM64 *)(x))->regs[2]) +#define PT_REGS_PARM4 (x) (((PT_REGS_ARM64 *)(x))->regs[3]) +#define PT_REGS_PARM5 (x) (((PT_REGS_ARM64 *)(x))->regs[4]) +#define PT_REGS_RET (x) (((PT_REGS_ARM64 *)(x))->regs[30]) +/* Works only with CONFIG_FRAME_POINTER */ +#define PT_REGS_FP (x) (((PT_REGS_ARM64 *)(x))->regs[29]) +#define PT_REGS_RC (x) (((PT_REGS_ARM64 *)(x))->regs[0]) +#define PT_REGS_SP (x) (((PT_REGS_ARM64 *)(x))->sp) +#define PT_REGS_IP (x) (((PT_REGS_ARM64 *)(x))->pc)#elif defined(bpf_target_mips)
Signature · 1 line
2.21.0
PATCH v4 4/4 selftests/bpf: fix compiling loop{1,2,3}.c on s390
In reply to Ilya LeoshkevichUse PT_REGS_RC(ctx) instead of ctx->rax, which is not present on s390.
--- tools/testing/selftests/bpf/progs/loop1.c | 2 +- tools/testing/selftests/bpf/progs/loop2.c | 2 +- tools/testing/selftests/bpf/progs/loop3.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
tools/testing/selftests/bpf/progs/loop1.c +1 -1
@@ -18,7 +18,7 @@ int nested_loops(volatile struct pt_regs* ctx)for (j =0 ; j <300 ; j++)for (i =0 ; i < j; i++) {if (j &1 ) - m = ctx->rax; + m =PT_REGS_RC (ctx);else m = j; sum += i * m;
tools/testing/selftests/bpf/progs/loop2.c +1 -1
@@ -16,7 +16,7 @@ int while_true(volatile struct pt_regs* ctx)int i =0 ;while (true) { -if (ctx->rax &1 ) +if (PT_REGS_RC (ctx) &1 ) i +=3 ;else i +=7 ;
tools/testing/selftests/bpf/progs/loop3.c +1 -1
@@ -16,7 +16,7 @@ int while_true(volatile struct pt_regs* ctx)__u64 i =0 , sum =0 ;do { i++; - sum += ctx->rax; + sum +=PT_REGS_RC (ctx); }while (i <0x100000000ULL );return sum; }
Signature · 1 line
2.21.0
Quoted 23 lines · Ilya Leoshkevich
Use
PT_REGS_RC(ctx)instead ofctx->rax, which is not present on s390.This patch series consists of three preparatory commits, which make it possible to use
PT_REGS_RCin BPF selftests, followed by the actual fix.Quoted 3 lines
Quoted 1 line
Will this also work for 32-bit x86?
Thanks, this is a good catch: this builds, but makes 64-bit accesses, as if it used the 64-bit variant of
pt_regs. I will fix this.I found four problems in this area:
1. Selftest tracing progs are built with -target bpf, leading to struct
pt_regsand friends being interpreted incorrectly.
2. When theMakefileis adjusted to build them without -target bpf, it still lacks -m32/-m64, leading to a similar issue.
3. There is no__i386__define, leading to incorrect userspace structpt_regsvariant being chosen for x86.
4. Finally, there is an issue in my patch: when 1-3 are fixed, it fails to build, since i386 defines yet another set of field names.I will send fixes for problems 1-3 separately, I believe for this patch series to be correct, it's enough to fix #4 (which I did by adding another #ifdef).
Quoted 6 lines
I've also changed ARCH to SRCARCH in patch #1, since while ARCH can be e.g. "i386", SRCARCH always corresponds to directory names under
arch/.
v1->v2: Split into multiple patches.v2->v3: Added arm64 support.v3->v4: Added i386 support, use SRCARCH instead of ARCH.
Still looks good to me, thanks!
Again, should probably go via bpf to fix the existing tests, not bpf-next (but I see bpf tree is not synced with net tree yet).
Quoted 3 lines
Signed-off-by Ilya Leoshkevich <[email protected]>
Re: [PATCH v4 bpf-next 3/4] selftests/bpf: make PT_REGS_* work in userspace
In reply to Ilya LeoshkevichQuoted 14 lines · Ilya Leoshkevich
Right now, on certain architectures, these macros are usable only with kernel headers. This patch makes it possible to use them with userspace headers and, as a consequence, not only in BPF samples, but also in BPF selftests.
On s390, provide the forward declaration of struct
pt_regsand cast it touser_pt_regsin PT_REGS_* macros. This is necessary, because instead of the full structpt_regs, s390 exposes only its first memberuser_pt_regsto userspace, andbpf_helpers.his used with both userspace (in selftests) and kernel (in samples) headers. It was added in commit466698e654e8("s390/bpf: correct broken uapi forBPF_PROG_TYPE_PERF_EVENTprogram type").
Quoted 8 lines
Ditto on arm64.
On x86, provide userspace versions of PT_REGS_* macros. Unlike s390 and arm64, x86 provides struct
pt_regsto both userspace and kernel, however, with different member names.Signed-off-by Ilya Leoshkevich <[email protected]>---
This is great, thanks!
Quoted 5 lines
tools/testing/selftests/bpf/bpf_helpers.h | 75 +++++++++++++++++------ 1 file changed, 55 insertions(+), 20 deletions(-)tools/testing/selftests/bpf/bpf_helpers.h +0
-0
[...]
Re: [PATCH v4 bpf-next 2/4] selftests/bpf: fix s930 -> s390 typo
In reply to Ilya LeoshkevichQuoted 6 lines · Ilya Leoshkevich
Also check for
__s390__instead of__s390x__, just in casebpf_helpers.his ever used by 32-bit userspace.Signed-off-by Ilya Leoshkevich <[email protected]>---
Quoted 41 lines
tools/testing/selftests/bpf/bpf_helpers.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)tools/testing/selftests/bpf/bpf_helpers.h +5
-6@@ -315,8 +315,8 @@ static int (*bpf_skb_adjust_room)(void *ctx, __s32 len_diff, __u32 mode,#if defined(__TARGET_ARCH_x86)#define bpf_target_x86#define bpf_target_defined -#elif defined(__TARGET_ARCH_s930x) -#define bpf_target_s930x +#elif defined(__TARGET_ARCH_s390) +#define bpf_target_s390#define bpf_target_defined#elif defined(__TARGET_ARCH_arm)#define bpf_target_arm@@ -341,8 +341,8 @@ static int (*bpf_skb_adjust_room)(void *ctx, __s32 len_diff, __u32 mode,#ifndef bpf_target_defined#if defined(__x86_64__)#define bpf_target_x86 -#elif defined(__s390x__) -#define bpf_target_s930x +#elif defined(__s390__) +#define bpf_target_s390#elif defined(__arm__)#define bpf_target_arm#elif defined(__aarch64__)@@ -369,7 +369,7 @@ static int (*bpf_skb_adjust_room)(void *ctx, __s32 len_diff, __u32 mode,#define PT_REGS_SP (x) ((x)->sp)#define PT_REGS_IP (x) ((x)->ip) -#elif defined(bpf_target_s390x) +#elif defined(bpf_target_s390)#define PT_REGS_PARM1 (x) ((x)->gprs[2])#define PT_REGS_PARM2 (x) ((x)->gprs[3]) --2.21.0
Re: [PATCH v4 bpf-next 1/4] selftests/bpf: compile progs with -D__TARGET_ARCH_$(SRCARCH)
In reply to Ilya LeoshkevichQuoted 20 lines · Ilya Leoshkevich
This opens up the possibility of accessing registers in an arch-independent way.
Signed-off-by Ilya Leoshkevich <[email protected]>--- tools/testing/selftests/bpf/Makefile | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)tools/testing/selftests/bpf/Makefile +1
-0@@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 +include ../../../scripts/Makefile.arch LIBDIR := ../../../lib BPFDIR := $(LIBDIR)/bpf
tools/testing/selftests/bpf/Makefile CLANG_SYS_INCLUDES := $(shell $(CLANG) -v -E - </dev/null 2>&1 \ · line 143
Quoted 6 lines
tools/testing/selftests/bpf/Makefile +2
-1@@ -138,7 +139,8 @@ CLANG_SYS_INCLUDES := $(shell $(CLANG) -v -E - </dev/null 2>&1 \ CLANG_FLAGS = -I. -I./include/uapi -I../../../include/uapi \ $(CLANG_SYS_INCLUDES) \ - -Wno-compare-distinct-pointer-types + -Wno-compare-distinct-pointer-types \ + -D__TARGET_ARCH_$(SRCARCH)
samples/bpf/Makefile uses $(ARCH), why does it work for samples? Should we update samples/bpf/Makefile as well?
Quoted 6 lines
tools/testing/selftests/bpf/Makefile +0
-1$(OUTPUT)/test_l4lb_noinline.o: CLANG_FLAGS += -fno-inline $(OUTPUT)/test_xdp_noinline.o: CLANG_FLAGS += -fno-inline --2.21.0
Quoted 8 lines
Am 11.07.2019 um 22:35 schrieb Stanislav Fomichev <[email protected]>:
Quoted 5 lines · Ilya Leoshkevich
Use
PT_REGS_RC(ctx)instead ofctx->rax, which is not present on s390.This patch series consists of three preparatory commits, which make it possible to use
PT_REGS_RCin BPF selftests, followed by the actual fix.
Quoted 6 lines
Still looks good to me, thanks!
Reviewed-by Stanislav Fomichev <[email protected]>Again, should probably go via bpf to fix the existing tests, not bpf-next (but I see bpf tree is not synced with net tree yet).
Sorry, I missed your comment the last time. You are right - that’s the reason I’ve been sending this to bpf-next so far — loop*.c don’t even exist in the bpf tree.
Re: [PATCH v4 bpf-next 1/4] selftests/bpf: compile progs with -D__TARGET_ARCH_$(SRCARCH)
In reply to Andrii NakryikoQuoted 24 lines
Am 12.07.2019 um 02:53 schrieb Andrii Nakryiko <[email protected]>:
Quoted 21 lines · Ilya Leoshkevich
This opens up the possibility of accessing registers in an arch-independent way.
Signed-off-by Ilya Leoshkevich <[email protected]>---
tools/testing/selftests/bpf/Makefile| 4 +++-1 file changed, 3 insertions(+), 1 deletion(-)tools/testing/selftests/bpf/Makefile +1
-0@@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 +include ../../../scripts/Makefile.archLIBDIR := ../../../lib
BPFDIR := $(LIBDIR)/bpftools/testing/selftests/bpf/Makefile +0
-0@@ -138,7 +139,8 @@ CLANG_SYS_INCLUDES := $(shell $(CLANG) -v -E - </dev/null 2>&1 \
Quoted 8 lines
tools/testing/selftests/bpf/Makefile CLANG_SYS_INCLUDES := $(shell $(CLANG) -v -E - </dev/null 2>&1 \ · line 143
Quoted 5 lines
tools/testing/selftests/bpf/Makefile +2
-1CLANG_FLAGS = -I. -I./include/uapi -I../../../include/uapi \ $(CLANG_SYS_INCLUDES) \ - -Wno-compare-distinct-pointer-types + -Wno-compare-distinct-pointer-types \ + -D__TARGET_ARCH_$(SRCARCH)
samples/bpf/Makefileuses $(ARCH), why does it work for samples? Should we updatesamples/bpf/Makefileas well?
I believe that in common cases both are okay, but judging by linux:Makefile and linux:tools/scripts/Makefile.arch, one could use e.g. ARCH=i686, and that would be converted to SRCARCH=x86. So IMHO SRCARCH is safer, and we should change bpf/samples/Makefile. I could send a patch separately.
Daniel Borkmann
maintainerQuoted 10 lines · Ilya Leoshkevich
Quoted 10 lines
Am 11.07.2019 um 22:35 schrieb Stanislav Fomichev <[email protected]>:
Quoted 5 lines · Ilya Leoshkevich
Use
PT_REGS_RC(ctx)instead ofctx->rax, which is not present on s390.This patch series consists of three preparatory commits, which make it possible to use
PT_REGS_RCin BPF selftests, followed by the actual fix.Still looks good to me, thanks!
Quoted 8 lines
Quoted 4 lines
Reviewed-by Stanislav Fomichev <[email protected]>Again, should probably go via bpf to fix the existing tests, not bpf-next (but I see bpf tree is not synced with net tree yet).
Sorry, I missed your comment the last time. You are right - that’s the reason I’ve been sending this to bpf-next so far — loop*.c don’t even exist in the bpf tree.
Applied to bpf tree (and also added Stanislav's Tested-by to the last one), thanks!
Re: [PATCH v4 bpf-next 1/4] selftests/bpf: compile progs with -D__TARGET_ARCH_$(SRCARCH)
In reply to Ilya LeoshkevichQuoted 34 lines · Ilya Leoshkevich
Quoted 25 lines
Am 12.07.2019 um 02:53 schrieb Andrii Nakryiko <[email protected]>:
Quoted 21 lines · Ilya Leoshkevich
This opens up the possibility of accessing registers in an arch-independent way.
Signed-off-by Ilya Leoshkevich <[email protected]>---
tools/testing/selftests/bpf/Makefile| 4 +++-1 file changed, 3 insertions(+), 1 deletion(-)tools/testing/selftests/bpf/Makefile +1
-0@@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 +include ../../../scripts/Makefile.archLIBDIR := ../../../lib
BPFDIR := $(LIBDIR)/bpftools/testing/selftests/bpf/Makefile +0
-0@@ -138,7 +139,8 @@ CLANG_SYS_INCLUDES := $(shell $(CLANG) -v -E - </dev/null 2>&1 \Quoted 8 lines
tools/testing/selftests/bpf/Makefile CLANG_SYS_INCLUDES := $(shell $(CLANG) -v -E - </dev/null 2>&1 \ · line 143
Quoted 5 lines
tools/testing/selftests/bpf/Makefile +2
-1CLANG_FLAGS = -I. -I./include/uapi -I../../../include/uapi \ $(CLANG_SYS_INCLUDES) \ - -Wno-compare-distinct-pointer-types + -Wno-compare-distinct-pointer-types \ + -D__TARGET_ARCH_$(SRCARCH)
samples/bpf/Makefileuses $(ARCH), why does it work for samples? Should we updatesamples/bpf/Makefileas well?
Quoted 5 lines
I believe that in common cases both are okay, but judging by linux:Makefile and linux:tools/scripts/Makefile.arch, one could use e.g. ARCH=i686, and that would be converted to SRCARCH=x86. So IMHO SRCARCH is safer, and we should change bpf/samples/Makefile. I could send a patch separately.
Yeah, let's do that then, thanks!