Skip to contentSkip to conversation

drm/lima: handle shared irq case for lima_pp_bcast_irq_handler

PATCH In review Sasha Levin 4 participants 179 messages Jul 19, 2019 – Jul 28, 2019 Page 1 of 2

Subsystems (30)
lore
Share & tools
lore
author maintainer
#1 lore raw

PATCH 2/171 drm/panel: simple: Fix panel_simple_dsi_probe

In reply to Sasha Levin

From: Peter Ujfalusi <[email protected]>

[ Upstream commit 7ad9db66fafb0f0ad53fd2a66217105da5ddeffe ]

In case mipi_dsi_attach() fails remove the registered panel to avoid added panel without corresponding device.

---
 drivers/gpu/drm/panel/panel-simple.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/gpu/drm/panel/panel-simple.c +8 -1
index 569be4efd8d1..48e2fa7bbe48 100644
@@ -3098,7 +3098,14 @@ static int panel_simple_dsi_probe(struct mipi_dsi_device *dsi)
 	dsi->format = desc->format;
 	dsi->lanes = desc->lanes;
 
-	return mipi_dsi_attach(dsi);
+	err = mipi_dsi_attach(dsi);
+	if (err) {
+		struct panel_simple *panel = dev_get_drvdata(&dsi->dev);
+
+		drm_panel_remove(&panel->base);
+	}
+
+	return err;
 }
 
 static int panel_simple_dsi_remove(struct mipi_dsi_device *dsi)
Signature · 1 line
2.20.1
author maintainer
#4 lore raw

PATCH 5/171 drm/virtio: set seqno for dma-fence

In reply to Sasha Levin

From: Chia-I Wu <[email protected]>

[ Upstream commit efe2bf965522bf0796d413b47a2abbf81d471d6f ]

This is motivated by having meaningful ftrace events, but it also fixes use cases where dma_fence_is_later is called, such as in sync_file_merge.

In other drivers, fence creation and cmdbuf submission normally happen atomically,

  mutex_lock();
  fence = dma_fence_create(..., ++timeline->seqno);
  submit_cmdbuf();
  mutex_unlock();

and have no such issue. But in our driver, because most ioctls queue commands into ctrlq, we do not want to grab a lock. Instead, we set seqno to 0 when a fence is created, and update it when the command is finally queued and the seqno is known.

---
 drivers/gpu/drm/virtio/virtgpu_drv.h   |  1 -
 drivers/gpu/drm/virtio/virtgpu_fence.c | 17 ++++++++++-------
 2 files changed, 10 insertions(+), 8 deletions(-)
drivers/gpu/drm/virtio/virtgpu_drv.h +0 -1
index b69ae10ca238..d724fb3de44e 100644
@@ -102,7 +102,6 @@ struct virtio_gpu_fence {
 	struct dma_fence f;
 	struct virtio_gpu_fence_driver *drv;
 	struct list_head node;
-	uint64_t seq;
 };
 #define to_virtio_fence(x) \
 	container_of(x, struct virtio_gpu_fence, f)
drivers/gpu/drm/virtio/virtgpu_fence.c +10 -7
index 87d1966192f4..72b4f7561432 100644
@@ -40,16 +40,14 @@ bool virtio_fence_signaled(struct dma_fence *f)
 {
 	struct virtio_gpu_fence *fence = to_virtio_fence(f);
 
-	if (atomic64_read(&fence->drv->last_seq) >= fence->seq)
+	if (atomic64_read(&fence->drv->last_seq) >= fence->f.seqno)
 		return true;
 	return false;
 }
 
 static void virtio_fence_value_str(struct dma_fence *f, char *str, int size)
 {
-	struct virtio_gpu_fence *fence = to_virtio_fence(f);
-
-	snprintf(str, size, "%llu", fence->seq);
+	snprintf(str, size, "%llu", f->seqno);
 }
 
 static void virtio_timeline_value_str(struct dma_fence *f, char *str, int size)
@@ -76,6 +74,11 @@ struct virtio_gpu_fence *virtio_gpu_fence_alloc(struct virtio_gpu_device *vgdev)
 		return fence;
 
 	fence->drv = drv;
+
+	/* This only partially initializes the fence because the seqno is
+	 * unknown yet.  The fence must not be used outside of the driver
+	 * until virtio_gpu_fence_emit is called.
+	 */
 	dma_fence_init(&fence->f, &virtio_fence_ops, &drv->lock, drv->context, 0);
 
 	return fence;
@@ -89,13 +92,13 @@ int virtio_gpu_fence_emit(struct virtio_gpu_device *vgdev,
 	unsigned long irq_flags;
 
 	spin_lock_irqsave(&drv->lock, irq_flags);
-	fence->seq = ++drv->sync_seq;
+	fence->f.seqno = ++drv->sync_seq;
 	dma_fence_get(&fence->f);
 	list_add_tail(&fence->node, &drv->fences);
 	spin_unlock_irqrestore(&drv->lock, irq_flags);
 
 	cmd_hdr->flags |= cpu_to_le32(VIRTIO_GPU_FLAG_FENCE);
-	cmd_hdr->fence_id = cpu_to_le64(fence->seq);
+	cmd_hdr->fence_id = cpu_to_le64(fence->f.seqno);
 	return 0;
 }
 
@@ -109,7 +112,7 @@ void virtio_gpu_fence_event_process(struct virtio_gpu_device *vgdev,
 	spin_lock_irqsave(&drv->lock, irq_flags);
 	atomic64_set(&vgdev->fence_drv.last_seq, last_seq);
 	list_for_each_entry_safe(fence, tmp, &drv->fences, node) {
-		if (last_seq < fence->seq)
+		if (last_seq < fence->f.seqno)
 			continue;
 		dma_fence_signal_locked(&fence->f);
 		list_del(&fence->node);
Signature · 1 line
2.20.1
author maintainer
#9 lore raw

PATCH 9/171 drm/bochs: Fix connector leak during driver unload

In reply to Sasha Levin

From: Sam Bobroff <[email protected]>

[ Upstream commit 3c6b8625dde82600fd03ad1fcba223f1303ee535 ]

When unloading the bochs-drm driver, a warning message is printed by drm_mode_config_cleanup() because a reference is still held to one of the drm_connector structs.

Correct this by calling drm_atomic_helper_shutdown() in bochs_pci_remove().

---
 drivers/gpu/drm/bochs/bochs_drv.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/gpu/drm/bochs/bochs_drv.c +2 -0
index b86cc705138c..d8b945596b09 100644
@@ -7,6 +7,7 @@
 #include <linux/slab.h>
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_atomic_helper.h>
 
 #include "bochs.h"
 
@@ -171,6 +172,7 @@ static void bochs_pci_remove(struct pci_dev *pdev)
 {
 	struct drm_device *dev = pci_get_drvdata(pdev);
 
+	drm_atomic_helper_shutdown(dev);
 	drm_dev_unregister(dev);
 	bochs_unload(dev);
 	drm_dev_put(dev);
Signature · 1 line
2.20.1
author maintainer
#12 lore raw

PATCH 11/171 tty: max310x: Fix invalid baudrate divisors calculator

In reply to Sasha Levin

From: Serge Semin <[email protected]>

[ Upstream commit 35240ba26a932b279a513f66fa4cabfd7af55221 ]

Current calculator doesn't do it' job quite correct. First of all the max310x baud-rates generator supports the divisor being less than 16. In this case the x2/x4 modes can be used to double or quadruple the reference frequency. But the current baud-rate setter function just filters all these modes out by the first condition and setups these modes only if there is a clocks-baud division remainder. The former doesn't seem right at all, since enabling the x2/x4 modes causes the line noise tolerance reduction and should be only used as a last resort to enable a requested too high baud-rate.

Finally the fraction is supposed to be calculated from D = Fref/(c*baud) formulae, but not from D % 16, which causes the precision loss. So to speak the current baud-rate calculator code works well only if the baud perfectly fits to the uart reference input frequency.

Lets fix the calculator by implementing the algo fully compliant with the fractional baud-rate generator described in the datasheet:
D = Fref / (c*baud), where c={16,8,4} is the x1/x2/x4 rate mode respectively, Fref - reference input frequency. The divisor fraction is calculated from the same formulae, but making sure it is found with a resolution of 0.0625 (four bits).

---
 drivers/tty/serial/max310x.c | 51 ++++++++++++++++++++++--------------
 1 file changed, 31 insertions(+), 20 deletions(-)
drivers/tty/serial/max310x.c +31 -20
index e5aebbf5f302..c3afd128b8fc 100644
@@ -496,37 +496,48 @@ static bool max310x_reg_precious(struct device *dev, unsigned int reg)
 
 static int max310x_set_baud(struct uart_port *port, int baud)
 {
-	unsigned int mode = 0, clk = port->uartclk, div = clk / baud;
+	unsigned int mode = 0, div = 0, frac = 0, c = 0, F = 0;
 
-	/* Check for minimal value for divider */
-	if (div < 16)
-		div = 16;
-
-	if (clk % baud && (div / 16) < 0x8000) {
+	/*
+	 * Calculate the integer divisor first. Select a proper mode
+	 * in case if the requested baud is too high for the pre-defined
+	 * clocks frequency.
+	 */
+	div = port->uartclk / baud;
+	if (div < 8) {
+		/* Mode x4 */
+		c = 4;
+		mode = MAX310X_BRGCFG_4XMODE_BIT;
+	} else if (div < 16) {
 		/* Mode x2 */
+		c = 8;
 		mode = MAX310X_BRGCFG_2XMODE_BIT;
-		clk = port->uartclk * 2;
-		div = clk / baud;
-
-		if (clk % baud && (div / 16) < 0x8000) {
-			/* Mode x4 */
-			mode = MAX310X_BRGCFG_4XMODE_BIT;
-			clk = port->uartclk * 4;
-			div = clk / baud;
-		}
+	} else {
+		c = 16;
 	}
 
-	max310x_port_write(port, MAX310X_BRGDIVMSB_REG, (div / 16) >> 8);
-	max310x_port_write(port, MAX310X_BRGDIVLSB_REG, div / 16);
-	max310x_port_write(port, MAX310X_BRGCFG_REG, (div % 16) | mode);
+	/* Calculate the divisor in accordance with the fraction coefficient */
+	div /= c;
+	F = c*baud;
+
+	/* Calculate the baud rate fraction */
+	if (div > 0)
+		frac = (16*(port->uartclk % F)) / F;
+	else
+		div = 1;
+
+	max310x_port_write(port, MAX310X_BRGDIVMSB_REG, div >> 8);
+	max310x_port_write(port, MAX310X_BRGDIVLSB_REG, div);
+	max310x_port_write(port, MAX310X_BRGCFG_REG, frac | mode);
 
-	return DIV_ROUND_CLOSEST(clk, div);
+	/* Return the actual baud rate we just programmed */
+	return (16*port->uartclk) / (c*(16*div + frac));
 }
 
 static int max310x_update_best_err(unsigned long f, long *besterr)
 {
 	/* Use baudrate 115200 for calculate error */
-	long err = f % (115200 * 16);
+	long err = f % (460800 * 16);
 
 	if ((*besterr < 0) || (*besterr > err)) {
 		*besterr = err;
Signature · 1 line
2.20.1
author maintainer
#13 lore raw

PATCH 12/171 pinctrl: rockchip: fix leaked of_node references

In reply to Sasha Levin

From: Wen Yang <[email protected]>

[ Upstream commit 3c89c70634bb0b6f48512de873e7a45c7e1fbaa5 ]

The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage.

Detected by coccinelle with the following warnings:
./drivers/pinctrl/pinctrl-rockchip.c:3221:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3196, but without a corresponding object release within this function. ./drivers/pinctrl/pinctrl-rockchip.c:3223:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3196, but without a corresponding object release within this function.

---
 drivers/pinctrl/pinctrl-rockchip.c | 1 +
 1 file changed, 1 insertion(+)
drivers/pinctrl/pinctrl-rockchip.c +1 -0
index 807a3263d849..62a622159006 100644
@@ -3204,6 +3204,7 @@ static int rockchip_get_bank_data(struct rockchip_pin_bank *bank,
 						    base,
 						    &rockchip_regmap_config);
 		}
+		of_node_put(node);
 	}
 
 	bank->irq = irq_of_parse_and_map(bank->of_node, 0);
Signature · 1 line
2.20.1
author maintainer
#14 lore raw

PATCH 13/171 tty: serial: cpm_uart - fix init when SMC is relocated

In reply to Sasha Levin

From: Christophe Leroy <[email protected]>

[ Upstream commit 06aaa3d066db87e8478522d910285141d44b1e58 ]

SMC relocation can also be activated earlier by the bootloader, so the driver's behaviour cannot rely on selected kernel config.

When the SMC is relocated, CPM_CR_INIT_TRX cannot be used.

But the only thing CPM_CR_INIT_TRX does is to clear the rstate and tstate registers, so this can be done manually, even when SMC is not relocated.

Fixes 9ab921201444 ("cpm_uart: fix non-console port startup bug")
---
 drivers/tty/serial/cpm_uart/cpm_uart_core.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)
drivers/tty/serial/cpm_uart/cpm_uart_core.c +11 -6
index b929c7ae3a27..7bab9a3eda92 100644
@@ -407,7 +407,16 @@ static int cpm_uart_startup(struct uart_port *port)
 			clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX);
 		}
 		cpm_uart_initbd(pinfo);
-		cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
+		if (IS_SMC(pinfo)) {
+			out_be32(&pinfo->smcup->smc_rstate, 0);
+			out_be32(&pinfo->smcup->smc_tstate, 0);
+			out_be16(&pinfo->smcup->smc_rbptr,
+				 in_be16(&pinfo->smcup->smc_rbase));
+			out_be16(&pinfo->smcup->smc_tbptr,
+				 in_be16(&pinfo->smcup->smc_tbase));
+		} else {
+			cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
+		}
 	}
 	/* Install interrupt handler. */
 	retval = request_irq(port->irq, cpm_uart_int, 0, "cpm_uart", port);
@@ -861,16 +870,14 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
 	         (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE);
 
 /*
- *  In case SMC1 is being relocated...
+ *  In case SMC is being relocated...
  */
-#if defined (CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
 	out_be16(&up->smc_rbptr, in_be16(&pinfo->smcup->smc_rbase));
 	out_be16(&up->smc_tbptr, in_be16(&pinfo->smcup->smc_tbase));
 	out_be32(&up->smc_rstate, 0);
 	out_be32(&up->smc_tstate, 0);
 	out_be16(&up->smc_brkcr, 1);              /* number of break chars */
 	out_be16(&up->smc_brkec, 0);
-#endif
 
 	/* Set up the uart parameters in the
 	 * parameter ram.
@@ -884,8 +891,6 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
 	out_be16(&up->smc_brkec, 0);
 	out_be16(&up->smc_brkcr, 1);
 
-	cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
-
 	/* Set UART mode, 8 bit, no parity, one stop.
 	 * Enable receive and transmit.
 	 */
Signature · 1 line
2.20.1
author maintainer
#19 lore raw

PATCH 16/171 drm/msm/a6xx: Check for ERR or NULL before iounmap

In reply to Sasha Levin

From: Sean Paul <[email protected]>

[ Upstream commit 5ca4a094ba7e1369363dcbcbde8baf06ddcdc2d1 ]

pdcptr and seqptr aren't necessarily valid, check them before trying to unmap them.

Changes in v2:
- None

---
 drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/gpu/drm/msm/adreno/a6xx_gmu.c +4 -2
index 38e2cfa9cec7..418bb08bbed7 100644
@@ -504,8 +504,10 @@ static void a6xx_gmu_rpmh_init(struct a6xx_gmu *gmu)
 	wmb();
 
 err:
-	devm_iounmap(gmu->dev, pdcptr);
-	devm_iounmap(gmu->dev, seqptr);
+	if (!IS_ERR_OR_NULL(pdcptr))
+		devm_iounmap(gmu->dev, pdcptr);
+	if (!IS_ERR_OR_NULL(seqptr))
+		devm_iounmap(gmu->dev, seqptr);
 }
 
 /*
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#21 lore raw

PATCH 18/171 drm/amd/display: Fill prescale_params->scale for RGB565

In reply to Sasha Levin

From: Nicholas Kazlauskas <[email protected]>

[ Upstream commit 1352c779cb74d427f4150cbe779a2f7886f70cae ]

[Why]
An assertion is thrown when using SURFACE_PIXEL_FORMAT_GRPH_RGB565 formats on DCE since the prescale_params->scale wasn't being filled.

Found by a dmesg-fail when running the igt@kms_plane@pixel-format-pipe-a-planes test on Baffin.

[How]
Fill in the scale parameter.

---
 drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +3 -0
index 7ac50ab1b762..7d7e93c87c28 100644
@@ -242,6 +242,9 @@ static void build_prescale_params(struct ipp_prescale_params *prescale_params,
 	prescale_params->mode = IPP_PRESCALE_MODE_FIXED_UNSIGNED;
 
 	switch (plane_state->format) {
+	case SURFACE_PIXEL_FORMAT_GRPH_RGB565:
+		prescale_params->scale = 0x2082;
+		break;
 	case SURFACE_PIXEL_FORMAT_GRPH_ARGB8888:
 	case SURFACE_PIXEL_FORMAT_GRPH_ABGR8888:
 		prescale_params->scale = 0x2020;
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#22 lore raw

PATCH 19/171 drm/amd/display: fix multi display seamless boot case

In reply to Sasha Levin

From: Anthony Koo <[email protected]>

[ Upstream commit 4cd75ff096f4ef49c343093b52a952f27aba7796 ]

[Why]
There is a scenario that causes eDP to become blank if there are multiple displays connected, and the external display is set as the primary display such that the first flip comes to the external display.

In this scenario, we call our optimize function before the eDP even has a chance to flip.

[How]
There is a check that prevents bandwidth optimize from occurring before first flip is complete on the seamless boot display.
But actually it assumed the seamless boot display is the first one to flip. But in this scenario it is not. Modify the check to ensure the steam with the seamless boot flag set is the one that has completed the first flip.

---
 drivers/gpu/drm/amd/display/dc/core/dc.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
drivers/gpu/drm/amd/display/dc/core/dc.c +8 -6
index 18c775a950cc..ee6b646180b6 100644
@@ -1138,9 +1138,6 @@ static enum dc_status dc_commit_state_no_check(struct dc *dc, struct dc_state *c
 		const struct dc_link *link = context->streams[i]->link;
 		struct dc_stream_status *status;
 
-		if (context->streams[i]->apply_seamless_boot_optimization)
-			context->streams[i]->apply_seamless_boot_optimization = false;
-
 		if (!context->streams[i]->mode_changed)
 			continue;
 
@@ -1792,10 +1789,15 @@ static void commit_planes_for_stream(struct dc *dc,
 	if (dc->optimize_seamless_boot && surface_count > 0) {
 		/* Optimize seamless boot flag keeps clocks and watermarks high until
 		 * first flip. After first flip, optimization is required to lower
-		 * bandwidth.
+		 * bandwidth. Important to note that it is expected UEFI will
+		 * only light up a single display on POST, therefore we only expect
+		 * one stream with seamless boot flag set.
 		 */
-		dc->optimize_seamless_boot = false;
-		dc->optimized_required = true;
+		if (stream->apply_seamless_boot_optimization) {
+			stream->apply_seamless_boot_optimization = false;
+			dc->optimize_seamless_boot = false;
+			dc->optimized_required = true;
+		}
 	}
 
 	if (update_type == UPDATE_TYPE_FULL && !dc->optimize_seamless_boot) {
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#23 lore raw

PATCH 20/171 drm/msm/a6xx: Avoid freeing gmu resources multiple times

In reply to Sasha Levin

From: Sean Paul <[email protected]>

[ Upstream commit 606ec90fc2266284f584a96ebf7f874589f56251 ]

The driver checks for gmu->mmio as a sign that the device has been initialized, however there are failures in probe below the mmio init. If one of those is hit, mmio will be non-null but freed.

In that case, a6xx_gmu_probe will return an error to a6xx_gpu_init which will in turn call a6xx_gmu_remove which checks gmu->mmio and tries to free resources for a second time. This causes a great boom.

Fix this by adding an initialized member to gmu which is set on successful probe and cleared on removal.

Changes in v2:
- None

---
 drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 14 +++++++++-----
 drivers/gpu/drm/msm/adreno/a6xx_gmu.h |  1 +
 2 files changed, 10 insertions(+), 5 deletions(-)
drivers/gpu/drm/msm/adreno/a6xx_gmu.c +9 -5
index 418bb08bbed7..6910d0468e3c 100644
@@ -74,7 +74,7 @@ bool a6xx_gmu_sptprac_is_on(struct a6xx_gmu *gmu)
 	u32 val;
 
 	/* This can be called from gpu state code so make sure GMU is valid */
-	if (IS_ERR_OR_NULL(gmu->mmio))
+	if (!gmu->initialized)
 		return false;
 
 	val = gmu_read(gmu, REG_A6XX_GMU_SPTPRAC_PWR_CLK_STATUS);
@@ -90,7 +90,7 @@ bool a6xx_gmu_gx_is_on(struct a6xx_gmu *gmu)
 	u32 val;
 
 	/* This can be called from gpu state code so make sure GMU is valid */
-	if (IS_ERR_OR_NULL(gmu->mmio))
+	if (!gmu->initialized)
 		return false;
 
 	val = gmu_read(gmu, REG_A6XX_GMU_SPTPRAC_PWR_CLK_STATUS);
@@ -697,7 +697,7 @@ int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu)
 	struct a6xx_gmu *gmu = &a6xx_gpu->gmu;
 	int status, ret;
 
-	if (WARN(!gmu->mmio, "The GMU is not set up yet\n"))
+	if (WARN(!gmu->initialized, "The GMU is not set up yet\n"))
 		return 0;
 
 	gmu->hung = false;
@@ -767,7 +767,7 @@ bool a6xx_gmu_isidle(struct a6xx_gmu *gmu)
 {
 	u32 reg;
 
-	if (!gmu->mmio)
+	if (!gmu->initialized)
 		return true;
 
 	reg = gmu_read(gmu, REG_A6XX_GPU_GMU_AO_GPU_CX_BUSY_STATUS);
@@ -1229,7 +1229,7 @@ void a6xx_gmu_remove(struct a6xx_gpu *a6xx_gpu)
 {
 	struct a6xx_gmu *gmu = &a6xx_gpu->gmu;
 
-	if (IS_ERR_OR_NULL(gmu->mmio))
+	if (!gmu->initialized)
 		return;
 
 	a6xx_gmu_stop(a6xx_gpu);
@@ -1247,6 +1247,8 @@ void a6xx_gmu_remove(struct a6xx_gpu *a6xx_gpu)
 	iommu_detach_device(gmu->domain, gmu->dev);
 
 	iommu_domain_free(gmu->domain);
+
+	gmu->initialized = false;
 }
 
 int a6xx_gmu_probe(struct a6xx_gpu *a6xx_gpu, struct device_node *node)
@@ -1311,6 +1313,8 @@ int a6xx_gmu_probe(struct a6xx_gpu *a6xx_gpu, struct device_node *node)
 	/* Set up the HFI queues */
 	a6xx_hfi_init(gmu);
 
+	gmu->initialized = true;
+
 	return 0;
 err:
 	a6xx_gmu_memory_free(gmu, gmu->hfi);
drivers/gpu/drm/msm/adreno/a6xx_gmu.h +1 -0
index bedd8e6a63aa..39a26dd63674 100644
@@ -75,6 +75,7 @@ struct a6xx_gmu {
 
 	struct a6xx_hfi_queue queues[2];
 
+	bool initialized;
 	bool hung;
 };
 
Signature · 1 line
2.20.1
author maintainer
#24 lore raw

PATCH 21/171 drm/amd/display: Disable cursor when offscreen in negative direction

In reply to Sasha Levin

From: Nicholas Kazlauskas <[email protected]>

[ Upstream commit e371e19c10a264bd72c2ff1d21e2167b994710d1 ]

[Why]
When x or y is negative we set the x and y values to 0 and compensate with a positive cursor hotspot in DM since DC expects positive cursor values.

When x or y is less than or equal to the maximum cursor width or height the cursor hotspot is clamped so the hotspot doesn't exceed the cursor size:

if (x < 0) {
        xorigin = min(-x, amdgpu_crtc->max_cursor_width - 1);
        x = 0;
}
if (y < 0) {
        yorigin = min(-y, amdgpu_crtc->max_cursor_height - 1);
        y = 0;
}

This incorrectly forces the cursor to be at least 1 pixel on the screen in either direction when x or y is sufficiently negative.

[How]
Just disable the cursor when it goes far enough off the screen in one of these directions.

This fixes kms_cursor_crc@cursor-256x256-offscreen.

---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +9 -5
index ab7c5c3004ee..fa268dd736f4 100644
@@ -4952,12 +4952,12 @@ static int get_cursor_position(struct drm_plane *plane, struct drm_crtc *crtc,
 	int x, y;
 	int xorigin = 0, yorigin = 0;
 
-	if (!crtc || !plane->state->fb) {
-		position->enable = false;
-		position->x = 0;
-		position->y = 0;
+	position->enable = false;
+	position->x = 0;
+	position->y = 0;
+
+	if (!crtc || !plane->state->fb)
 		return 0;
-	}
 
 	if ((plane->state->crtc_w > amdgpu_crtc->max_cursor_width) ||
 	    (plane->state->crtc_h > amdgpu_crtc->max_cursor_height)) {
@@ -4971,6 +4971,10 @@ static int get_cursor_position(struct drm_plane *plane, struct drm_crtc *crtc,
 	x = plane->state->crtc_x;
 	y = plane->state->crtc_y;
 
+	if (x <= -amdgpu_crtc->max_cursor_width ||
+	    y <= -amdgpu_crtc->max_cursor_height)
+		return 0;
+
 	if (crtc->primary->state) {
 		/* avivo cursor are offset into the total surface */
 		x += crtc->primary->state->src_x >> 16;
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#25 lore raw

PATCH 22/171 drm/amd/display: Fill plane attrs only for valid pxl format

In reply to Sasha Levin

From: Roman Li <[email protected]>

[ Upstream commit 1894478ad1f8fd7366edc5cee49ee9caea0e3d52 ]

[Why]
In fill_plane_buffer_attributes() we calculate chroma/luma assuming that the surface_pixel_format is always valid. If it's not the case, there's a risk of divide by zero error.

[How]
Check if format valid before calculating pixel format attributes

---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +1 -1
index fa268dd736f4..31530bfd002a 100644
@@ -2592,7 +2592,7 @@ fill_plane_buffer_attributes(struct amdgpu_device *adev,
 		address->type = PLN_ADDR_TYPE_GRAPHICS;
 		address->grph.addr.low_part = lower_32_bits(afb->address);
 		address->grph.addr.high_part = upper_32_bits(afb->address);
-	} else {
+	} else if (format < SURFACE_PIXEL_FORMAT_INVALID) {
 		uint64_t chroma_addr = afb->address + fb->offsets[1];
 
 		plane_size->video.luma_size.x = 0;
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#26 lore raw

PATCH 23/171 drm/amdgpu: Reserve shared fence for eviction fence

In reply to Sasha Levin

From: Felix Kuehling <[email protected]>

[ Upstream commit dd68722c427d5b33420dce0ed0c44b4881e0a416 ]

Need to reserve space for the shared eviction fence when initializing a KFD VM.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c +4 -0
index a6e5184d436c..4b192e0ce92f 100644
@@ -896,6 +896,9 @@ static int init_kfd_vm(struct amdgpu_vm *vm, void **process_info,
 				  AMDGPU_FENCE_OWNER_KFD, false);
 	if (ret)
 		goto wait_pd_fail;
+	ret = reservation_object_reserve_shared(vm->root.base.bo->tbo.resv, 1);
+	if (ret)
+		goto reserve_shared_fail;
 	amdgpu_bo_fence(vm->root.base.bo,
 			&vm->process_info->eviction_fence->base, true);
 	amdgpu_bo_unreserve(vm->root.base.bo);
@@ -909,6 +912,7 @@ static int init_kfd_vm(struct amdgpu_vm *vm, void **process_info,
 
 	return 0;
 
+reserve_shared_fail:
 wait_pd_fail:
 validate_pd_fail:
 	amdgpu_bo_unreserve(vm->root.base.bo);
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#28 lore raw

PATCH 25/171 drm/amdgpu/sriov: Need to initialize the HDP_NONSURFACE_BAStE

In reply to Sasha Levin

From: Tiecheng Zhou <[email protected]>

[ Upstream commit fe2b5323d2c3cedaa3bf943dc7a0d233c853c914 ]

it requires to initialize HDP_NONSURFACE_BASE, so as to avoid using the value left by a previous VM under sriov scenario.

v2: it should not hurt baremetal, generalize it for both sriov and baremetal

---
 drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c +3 -0
index 72837b8c7031..c2086eb00555 100644
@@ -1163,6 +1163,9 @@ static int gmc_v9_0_gart_enable(struct amdgpu_device *adev)
 	tmp = RREG32_SOC15(HDP, 0, mmHDP_HOST_PATH_CNTL);
 	WREG32_SOC15(HDP, 0, mmHDP_HOST_PATH_CNTL, tmp);
 
+	WREG32_SOC15(HDP, 0, mmHDP_NONSURFACE_BASE, (adev->gmc.vram_start >> 8));
+	WREG32_SOC15(HDP, 0, mmHDP_NONSURFACE_BASE_HI, (adev->gmc.vram_start >> 40));
+
 	/* After HDP is initialized, flush HDP.*/
 	adev->nbio_funcs->hdp_flush(adev, NULL);
 
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#29 lore raw

PATCH 26/171 drm/amd/display: Disable ABM before destroy ABM struct

In reply to Sasha Levin

From: Paul Hsieh <[email protected]>

[ Upstream commit 1090d58d4815b1fcd95a80987391006c86398b4c ]

[Why]
When disable driver, OS will set backlight optimization then do stop device. But this flag will cause driver to enable ABM when driver disabled.

[How]
Send ABM disable command before destroy ABM construct

---
 drivers/gpu/drm/amd/display/dc/dce/dce_abm.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/gpu/drm/amd/display/dc/dce/dce_abm.c +2 -0
index da96229db53a..2959c3c9390b 100644
@@ -473,6 +473,8 @@ void dce_abm_destroy(struct abm **abm)
 {
 	struct dce_abm *abm_dce = TO_DCE_ABM(*abm);
 
+	abm_dce->base.funcs->set_abm_immediate_disable(*abm);
+
 	kfree(abm_dce);
 	*abm = NULL;
 }
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#30 lore raw

PATCH 27/171 drm/amdkfd: Fix a potential memory leak

In reply to Sasha Levin

From: Oak Zeng <[email protected]>

[ Upstream commit e73390d181103a19e1111ec2f25559a0570e9fe0 ]

Free mqd_mem_obj it GTT buffer allocation for MQD+control stack fails.

---
 drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v9.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v9.c +4 -1
index 9dbba609450e..8fe74b821b32 100644
@@ -76,6 +76,7 @@ static int init_mqd(struct mqd_manager *mm, void **mqd,
 	struct v9_mqd *m;
 	struct kfd_dev *kfd = mm->dev;
 
+	*mqd_mem_obj = NULL;
 	/* From V9,  for CWSR, the control stack is located on the next page
 	 * boundary after the mqd, we will use the gtt allocation function
 	 * instead of sub-allocation function.
@@ -93,8 +94,10 @@ static int init_mqd(struct mqd_manager *mm, void **mqd,
 	} else
 		retval = kfd_gtt_sa_allocate(mm->dev, sizeof(struct v9_mqd),
 				mqd_mem_obj);
-	if (retval != 0)
+	if (retval) {
+		kfree(*mqd_mem_obj);
 		return -ENOMEM;
+	}
 
 	m = (struct v9_mqd *) (*mqd_mem_obj)->cpu_ptr;
 	addr = (*mqd_mem_obj)->gpu_addr;
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#31 lore raw

PATCH 28/171 drm/amdkfd: Fix sdma queue map issue

In reply to Sasha Levin

From: Oak Zeng <[email protected]>

[ Upstream commit 065e4bdfa1f3ab2884c110394d8b7e7ebe3b988c ]

Previous codes assumes there are two sdma engines. This is not true e.g., Raven only has 1 SDMA engine. Fix the issue by using sdma engine number info in device_info.

---
 .../drm/amd/amdkfd/kfd_device_queue_manager.c | 21 +++++++++++--------
 1 file changed, 12 insertions(+), 9 deletions(-)
drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +12 -9
index ae381450601c..afbaf6f5131e 100644
@@ -1268,12 +1268,17 @@ int amdkfd_fence_wait_timeout(unsigned int *fence_addr,
 	return 0;
 }
 
-static int unmap_sdma_queues(struct device_queue_manager *dqm,
-				unsigned int sdma_engine)
+static int unmap_sdma_queues(struct device_queue_manager *dqm)
 {
-	return pm_send_unmap_queue(&dqm->packets, KFD_QUEUE_TYPE_SDMA,
-			KFD_UNMAP_QUEUES_FILTER_DYNAMIC_QUEUES, 0, false,
-			sdma_engine);
+	int i, retval = 0;
+
+	for (i = 0; i < dqm->dev->device_info->num_sdma_engines; i++) {
+		retval = pm_send_unmap_queue(&dqm->packets, KFD_QUEUE_TYPE_SDMA,
+			KFD_UNMAP_QUEUES_FILTER_DYNAMIC_QUEUES, 0, false, i);
+		if (retval)
+			return retval;
+	}
+	return retval;
 }
 
 /* dqm->lock mutex has to be locked before calling this function */
@@ -1312,10 +1317,8 @@ static int unmap_queues_cpsch(struct device_queue_manager *dqm,
 	pr_debug("Before destroying queues, sdma queue count is : %u\n",
 		dqm->sdma_queue_count);
 
-	if (dqm->sdma_queue_count > 0) {
-		unmap_sdma_queues(dqm, 0);
-		unmap_sdma_queues(dqm, 1);
-	}
+	if (dqm->sdma_queue_count > 0)
+		unmap_sdma_queues(dqm);
 
 	retval = pm_send_unmap_queue(&dqm->packets, KFD_QUEUE_TYPE_COMPUTE,
 			filter, filter_param, false, 0);
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#38 lore raw

PATCH 35/171 drm/amd/display: Reset planes for color management changes

In reply to Sasha Levin

From: Nicholas Kazlauskas <[email protected]>

[ Upstream commit 7316c4ad299663a16ca9ce13e5e817b4ca760809 ]

[Why]
For commits with allow_modeset=false and CRTC degamma changes the planes aren't reset. This results in incorrect rendering.

[How]
Reset the planes when color management has changed on the CRTC. Technically this will include regamma changes as well, but it doesn't really after legacy userspace since those commit with allow_modeset=true.

---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +4 -0
index 31530bfd002a..0e482349a5cb 100644
@@ -6331,6 +6331,10 @@ static bool should_reset_plane(struct drm_atomic_state *state,
 	if (!new_crtc_state)
 		return true;
 
+	/* CRTC Degamma changes currently require us to recreate planes. */
+	if (new_crtc_state->color_mgmt_changed)
+		return true;
+
 	if (drm_atomic_crtc_needs_modeset(new_crtc_state))
 		return true;
 
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#39 lore raw

PATCH 36/171 drm/amd/display: CS_TFM_1D only applied post EOTF

In reply to Sasha Levin

From: Krunoslav Kovac <[email protected]>

[ Upstream commit 6ad34adeaec5b56a5ba90e90099cabf1c1fe9dd2 ]

[Why]
There's some unnecessary mem allocation for CS_TFM_ID. What's worse, it depends on LUT size and since it's 4K for CS_TFM_1D, it is 16x bigger than in regular case when it's actually needed. This leads to some crashes in stress conditions.

[How]
Skip ramp combining designed for RGB256 and DXGI gamma with CS_TFM_1D.

---
 drivers/gpu/drm/amd/display/modules/color/color_gamma.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/display/modules/color/color_gamma.c +2 -1
index a1055413bade..31f867bb5afe 100644
@@ -1564,7 +1564,8 @@ bool mod_color_calculate_regamma_params(struct dc_transfer_func *output_tf,
 
 	output_tf->type = TF_TYPE_DISTRIBUTED_POINTS;
 
-	if (ramp && (mapUserRamp || ramp->type != GAMMA_RGB_256)) {
+	if (ramp && ramp->type != GAMMA_CS_TFM_1D &&
+			(mapUserRamp || ramp->type != GAMMA_RGB_256)) {
 		rgb_user = kvcalloc(ramp->num_entries + _EXTRA_POINTS,
 			    sizeof(*rgb_user),
 			    GFP_KERNEL);
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#40 lore raw

PATCH 37/171 drm/amd/display: Increase Backlight Gain Step Size

In reply to Sasha Levin

From: Eryk Brol <[email protected]>

[ Upstream commit e25228b02e4833e5b0fdd262801a2ae6cc72b39d ]

[Why]
Some backlight tests fail due to backlight settling taking too long. This happens because the step size used to change backlight levels is too small.

[How]
1. Change the size of the backlight gain step size
2. Change how DMCU firmware gets the step size value so that it is passed in by driver during DMCU initn

---
 drivers/gpu/drm/amd/display/dc/dce/dce_dmcu.c | 3 +++
 drivers/gpu/drm/amd/display/dc/dce/dce_dmcu.h | 2 ++
 2 files changed, 5 insertions(+)
drivers/gpu/drm/amd/display/dc/dce/dce_dmcu.c +3 -0
index 818536eea00a..c6a607cd0e4b 100644
@@ -388,6 +388,9 @@ static bool dcn10_dmcu_init(struct dmcu *dmcu)
 		/* Set initialized ramping boundary value */
 		REG_WRITE(MASTER_COMM_DATA_REG1, 0xFFFF);
 
+		/* Set backlight ramping stepsize */
+		REG_WRITE(MASTER_COMM_DATA_REG2, abm_gain_stepsize);
+
 		/* Set command to initialize microcontroller */
 		REG_UPDATE(MASTER_COMM_CMD_REG, MASTER_COMM_CMD_REG_BYTE0,
 			MCP_INIT_DMCU);
drivers/gpu/drm/amd/display/dc/dce/dce_dmcu.h +2 -0
index 60ce56f60ae3..5bd0df55aa5d 100644
@@ -263,4 +263,6 @@ struct dmcu *dcn10_dmcu_create(
 
 void dce_dmcu_destroy(struct dmcu **dmcu);
 
+static const uint32_t abm_gain_stepsize = 0x0060;
+
 #endif /* _DCE_ABM_H_ */
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#43 lore raw

PATCH 40/171 gpu: host1x: Increase maximum DMA segment size

In reply to Sasha Levin

From: Thierry Reding <[email protected]>

[ Upstream commit 1e390478cfb527e34c9ab89ba57212cb05c33c51 ]

Recent versions of the DMA API debug code have started to warn about violations of the maximum DMA segment size. This is because the segment size defaults to 64 KiB, which can easily be exceeded in large buffer allocations such as used in DRM/KMS for framebuffers.

Technically the Tegra SMMU and ARM SMMU don't have a maximum segment size (they map individual pages irrespective of whether they are contiguous or not), so the choice of 4 MiB is a bit arbitrary here. The maximum segment size is a 32-bit unsigned integer, though, so we can't set it to the correct maximum size, which would be the size of the aperture.

---
 drivers/gpu/host1x/bus.c | 3 +++
 include/linux/host1x.h   | 2 ++
 2 files changed, 5 insertions(+)
drivers/gpu/host1x/bus.c +3 -0
index 9797ccb0a073..6387302c1245 100644
@@ -414,6 +414,9 @@ static int host1x_device_add(struct host1x *host1x,
 
 	of_dma_configure(&device->dev, host1x->dev->of_node, true);
 
+	device->dev.dma_parms = &device->dma_parms;
+	dma_set_max_seg_size(&device->dev, SZ_4M);
+
 	err = host1x_device_parse_dt(device, driver);
 	if (err < 0) {
 		kfree(device);
include/linux/host1x.h +2 -0
index cfff30b9a62e..e6eea45e1154 100644
@@ -297,6 +297,8 @@ struct host1x_device {
 	struct list_head clients;
 
 	bool registered;
+
+	struct device_dma_parameters dma_parms;
 };
 
 static inline struct host1x_device *to_host1x_device(struct device *dev)
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#44 lore raw

PATCH 41/171 drm/crc-debugfs: User irqsafe spinlock in drm_crtc_add_crc_entry

In reply to Sasha Levin

From: Daniel Vetter <[email protected]>

[ Upstream commit 1882018a70e06376234133e69ede9dd743b4dbd9 ]

We can be called from any context, we need to be prepared.

Noticed this while hacking on vkms, which calls this function from a normal worker. Which really upsets lockdep.

---
 drivers/gpu/drm/drm_debugfs_crc.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/gpu/drm/drm_debugfs_crc.c +3 -2
index 00e743153e94..1a6a5b78e30f 100644
@@ -389,8 +389,9 @@ int drm_crtc_add_crc_entry(struct drm_crtc *crtc, bool has_frame,
 	struct drm_crtc_crc *crc = &crtc->crc;
 	struct drm_crtc_crc_entry *entry;
 	int head, tail;
+	unsigned long flags;
 
-	spin_lock(&crc->lock);
+	spin_lock_irqsave(&crc->lock, flags);
 
 	/* Caller may not have noticed yet that userspace has stopped reading */
 	if (!crc->entries) {
@@ -421,7 +422,7 @@ int drm_crtc_add_crc_entry(struct drm_crtc *crtc, bool has_frame,
 	head = (head + 1) & (DRM_CRC_ENTRIES_NR - 1);
 	crc->head = head;
 
-	spin_unlock(&crc->lock);
+	spin_unlock_irqrestore(&crc->lock, flags);
 
 	wake_up_interruptible(&crc->wq);
 
Signature · 1 line
2.20.1
author maintainer
#45 lore raw

PATCH 42/171 drm/crc-debugfs: Also sprinkle irqrestore over early exits

In reply to Sasha Levin

From: Daniel Vetter <[email protected]>

[ Upstream commit d99004d7201aa653658ff2390d6e516567c96ebc ]

I. was. blind.

Caught with vkms, which has some really slow crc computation function.

Fixes 1882018a70e0 ("drm/crc-debugfs: User irqsafe spinlock in drm_crtc_add_crc_entry")
Cc Rodrigo Siqueira <[email protected]>
Cc Tomeu Vizoso <[email protected]>
Cc Emil Velikov <[email protected]>
Cc Benjamin Gaignard <[email protected]>
Cc Ville Syrjälä <[email protected]>
---
 drivers/gpu/drm/drm_debugfs_crc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/drm_debugfs_crc.c +2 -2
index 1a6a5b78e30f..fde298d9f510 100644
@@ -395,7 +395,7 @@ int drm_crtc_add_crc_entry(struct drm_crtc *crtc, bool has_frame,
 
 	/* Caller may not have noticed yet that userspace has stopped reading */
 	if (!crc->entries) {
-		spin_unlock(&crc->lock);
+		spin_unlock_irqrestore(&crc->lock, flags);
 		return -EINVAL;
 	}
 
@@ -406,7 +406,7 @@ int drm_crtc_add_crc_entry(struct drm_crtc *crtc, bool has_frame,
 		bool was_overflow = crc->overflow;
 
 		crc->overflow = true;
-		spin_unlock(&crc->lock);
+		spin_unlock_irqrestore(&crc->lock, flags);
 
 		if (!was_overflow)
 			DRM_ERROR("Overflow of CRC buffer, userspace reads too slow.\n");
Signature · 1 line
2.20.1
author maintainer
#47 lore raw

PATCH 44/171 i2c: nvidia-gpu: resume ccgx i2c client

In reply to Sasha Levin

From: Ajay Gupta <[email protected]>

[ Upstream commit 9f2e244d0a39eb437f98324ac315e605e48636db ]

Cypress USB Type-C CCGx controller firmware version 3.1.10 (which is being used in many NVIDIA GPU cards) has known issue of not triggering interrupt when a USB device is hot plugged to runtime resume the controller. If any GPU card gets latest kernel with runtime pm support but does not get latest fixed firmware then also it should continue to work and therefore a workaround is required to check for any connector change event

The workaround is to request runtime resume of i2c client which is UCSI Cypress CCGx driver. CCG driver will call the ISR for any connector change event only if NVIDIA GPU has old CCG firmware with the known issue.

---
 drivers/i2c/busses/i2c-nvidia-gpu.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)
drivers/i2c/busses/i2c-nvidia-gpu.c +10 -4
index 1c8f708f212b..ee2412b7459c 100644
@@ -51,6 +51,7 @@ struct gpu_i2c_dev {
 	void __iomem *regs;
 	struct i2c_adapter adapter;
 	struct i2c_board_info *gpu_ccgx_ucsi;
+	struct i2c_client *ccgx_client;
 };
 
 static void gpu_enable_i2c_bus(struct gpu_i2c_dev *i2cd)
@@ -261,8 +262,6 @@ static const struct property_entry ccgx_props[] = {
 
 static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq)
 {
-	struct i2c_client *ccgx_client;
-
 	i2cd->gpu_ccgx_ucsi = devm_kzalloc(i2cd->dev,
 					   sizeof(*i2cd->gpu_ccgx_ucsi),
 					   GFP_KERNEL);
@@ -274,8 +273,8 @@ static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq)
 	i2cd->gpu_ccgx_ucsi->addr = 0x8;
 	i2cd->gpu_ccgx_ucsi->irq = irq;
 	i2cd->gpu_ccgx_ucsi->properties = ccgx_props;
-	ccgx_client = i2c_new_device(&i2cd->adapter, i2cd->gpu_ccgx_ucsi);
-	if (!ccgx_client)
+	i2cd->ccgx_client = i2c_new_device(&i2cd->adapter, i2cd->gpu_ccgx_ucsi);
+	if (!i2cd->ccgx_client)
 		return -ENODEV;
 
 	return 0;
@@ -354,6 +353,13 @@ static __maybe_unused int gpu_i2c_resume(struct device *dev)
 	struct gpu_i2c_dev *i2cd = dev_get_drvdata(dev);
 
 	gpu_enable_i2c_bus(i2cd);
+	/*
+	 * Runtime resume ccgx client so that it can see for any
+	 * connector change event. Old ccg firmware has known
+	 * issue of not triggering interrupt when a device is
+	 * connected to runtime resume the controller.
+	 */
+	pm_request_resume(&i2cd->ccgx_client->dev);
 	return 0;
 }
 
Signature · 1 line
2.20.1
author maintainer
#50 lore raw

PATCH 47/171 memstick: Fix error cleanup path of memstick_init

In reply to Sasha Levin

From: Wang Hai <[email protected]>

[ Upstream commit 65f1a0d39c289bb6fc85635528cd36c4b07f560e ]

If bus_register fails. On its error handling path, it has cleaned up what it has done. There is no need to call bus_unregister again. Otherwise, if bus_unregister is called, issues such as null-ptr-deref will arise.

Syzkaller report this:

kobject_add_internal failed for memstick (error: -12 parent: bus)

BUG: KASAN: null-ptr-deref in sysfs_remove_file_ns+0x1b/0x40 fs/sysfs/file.c:467
Read of size 8 at addr 0000000000000078 by task syz-executor.0/4460

Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xa9/0x10e lib/dump_stack.c:113
 __kasan_report+0x171/0x18d mm/kasan/report.c:321
 kasan_report+0xe/0x20 mm/kasan/common.c:614
 sysfs_remove_file_ns+0x1b/0x40 fs/sysfs/file.c:467
 sysfs_remove_file include/linux/sysfs.h:519 [inline]
 bus_remove_file+0x6c/0x90 drivers/base/bus.c:145
 remove_probe_files drivers/base/bus.c:599 [inline]
 bus_unregister+0x6e/0x100 drivers/base/bus.c:916 ? 0xffffffffc1590000
 memstick_init+0x7a/0x1000 [memstick]
 do_one_initcall+0xb9/0x3b5 init/main.c:914
 do_init_module+0xe0/0x330 kernel/module.c:3468
 load_module+0x38eb/0x4270 kernel/module.c:3819
 __do_sys_finit_module+0x162/0x190 kernel/module.c:3909
 do_syscall_64+0x72/0x2a0 arch/x86/entry/common.c:298
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes baf8532a147d ("memstick: initial commit for Sony MemoryStick support")
---
 drivers/memstick/core/memstick.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/memstick/core/memstick.c +9 -4
index 6cfb293396f2..693ee73eb291 100644
@@ -625,13 +625,18 @@ static int __init memstick_init(void)
 		return -ENOMEM;
 
 	rc = bus_register(&memstick_bus_type);
-	if (!rc)
-		rc = class_register(&memstick_host_class);
+	if (rc)
+		goto error_destroy_workqueue;
 
-	if (!rc)
-		return 0;
+	rc = class_register(&memstick_host_class);
+	if (rc)
+		goto error_bus_unregister;
+
+	return 0;
 
+error_bus_unregister:
 	bus_unregister(&memstick_bus_type);
+error_destroy_workqueue:
 	destroy_workqueue(workqueue);
 
 	return rc;
Signature · 1 line
2.20.1
author maintainer
#51 lore raw

PATCH 48/171 tty/serial: digicolor: Fix digicolor-usart already registered warning

In reply to Sasha Levin

From: Kefeng Wang <[email protected]>

[ Upstream commit c7ad9ba0611c53cfe194223db02e3bca015f0674 ]

When modprobe/rmmod/modprobe module, if platform_driver_register() fails, the kernel complained,

proc_dir_entry 'driver/digicolor-usart' already registered

  WARNING: CPU: 1 PID: 5636 at fs/proc/generic.c:360 proc_register+0x19d/0x270

Fix this by adding uart_unregister_driver() when platform_driver_register() fails.

---
 drivers/tty/serial/digicolor-usart.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/tty/serial/digicolor-usart.c +5 -1
index f460cca139e2..13ac36e2da4f 100644
@@ -541,7 +541,11 @@ static int __init digicolor_uart_init(void)
 	if (ret)
 		return ret;
 
-	return platform_driver_register(&digicolor_uart_platform);
+	ret = platform_driver_register(&digicolor_uart_platform);
+	if (ret)
+		uart_unregister_driver(&digicolor_uart);
+
+	return ret;
 }
 module_init(digicolor_uart_init);
 
Signature · 1 line
2.20.1
author maintainer
#52 lore raw

PATCH 49/171 tty: serial: msm_serial: avoid system lockup condition

In reply to Sasha Levin

From: Jorge Ramirez-Ortiz <[email protected]>

[ Upstream commit ba3684f99f1b25d2a30b6956d02d339d7acb9799 ]

The function msm_wait_for_xmitr can be taken with interrupts disabled. In order to avoid a potential system lockup - demonstrated under stress testing conditions on SoC QCS404/5 - make sure we wait for a bounded amount of time.

Tested on SoC QCS404.

---
 drivers/tty/serial/msm_serial.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/tty/serial/msm_serial.c +4 -0
index 23833ad952ba..3657a24913fc 100644
@@ -383,10 +383,14 @@ static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base)
 
 static inline void msm_wait_for_xmitr(struct uart_port *port)
 {
+	unsigned int timeout = 500000;
+
 	while (!(msm_read(port, UART_SR) & UART_SR_TX_EMPTY)) {
 		if (msm_read(port, UART_ISR) & UART_ISR_TX_READY)
 			break;
 		udelay(1);
+		if (!timeout--)
+			break;
 	}
 	msm_write(port, UART_CR_CMD_RESET_TX_READY, UART_CR);
 }
Signature · 1 line
2.20.1
author maintainer
#53 lore raw

PATCH 50/171 serial: 8250: Fix TX interrupt handling condition

In reply to Sasha Levin

From: Rautkoski Kimmo EXT <[email protected]>

[ Upstream commit db1b5bc047b3cadaedab3826bba82c3d9e023c4b ]

Interrupt handler checked THRE bit (transmitter holding register empty) in LSR to detect if TX fifo is empty.
In case when there is only receive interrupts the TX handling got called because THRE bit in LSR is set when there is no transmission (FIFO empty). TX handling caused TX stop, which in RS-485 half-duplex mode actually resets receiver FIFO. This is not desired during reception because of possible data loss.

The fix is to check if THRI is set in IER in addition of the TX fifo status. THRI in IER is set when TX is started and cleared when TX is stopped.
This ensures that TX handling is only called when there is really transmission on going and an interrupt for THRE and not when there are only RX interrupts.

---
 drivers/tty/serial/8250/8250_port.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/tty/serial/8250/8250_port.c +2 -1
index 682300713be4..eb2e2d141c01 100644
@@ -1874,7 +1874,8 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 			status = serial8250_rx_chars(up, status);
 	}
 	serial8250_modem_status(up);
-	if ((!up->dma || up->dma->tx_err) && (status & UART_LSR_THRE))
+	if ((!up->dma || up->dma->tx_err) && (status & UART_LSR_THRE) &&
+		(up->ier & UART_IER_THRI))
 		serial8250_tx_chars(up);
 
 	uart_unlock_and_check_sysrq(port, flags);
Signature · 1 line
2.20.1
author maintainer
#55 lore raw

PATCH 52/171 drm/amd/display: Always allocate initial connector state state

In reply to Sasha Levin

From: Nicholas Kazlauskas <[email protected]>

[ Upstream commit f04bee34d6e35df26cbb2d65e801adfd0d8fe20d ]

[Why]
Unlike our regular connectors, MST connectors don't start off with an initial connector state. This causes a NULL pointer dereference to occur when attaching the bpc property since it tries to modify the connector state.

We need an initial connector state on the connector to avoid the crash.

[How]
Use our reset helper to allocate an initial state and reset the values to their defaults. We were already doing this before, just not for MST connectors.

---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +7 -3
index 0e482349a5cb..dc3ac66a4450 100644
@@ -4627,6 +4627,13 @@ void amdgpu_dm_connector_init_helper(struct amdgpu_display_manager *dm,
 {
 	struct amdgpu_device *adev = dm->ddev->dev_private;
 
+	/*
+	 * Some of the properties below require access to state, like bpc.
+	 * Allocate some default initial connector state with our reset helper.
+	 */
+	if (aconnector->base.funcs->reset)
+		aconnector->base.funcs->reset(&aconnector->base);
+
 	aconnector->connector_id = link_index;
 	aconnector->dc_link = link;
 	aconnector->base.interlace_allowed = false;
@@ -4809,9 +4816,6 @@ static int amdgpu_dm_connector_init(struct amdgpu_display_manager *dm,
 			&aconnector->base,
 			&amdgpu_dm_connector_helper_funcs);
 
-	if (aconnector->base.funcs->reset)
-		aconnector->base.funcs->reset(&aconnector->base);
-
 	amdgpu_dm_connector_init_helper(
 		dm,
 		aconnector,
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#56 lore raw

PATCH 53/171 drm/amd/display: Update link rate from DPCD 10

In reply to Sasha Levin

From: Wesley Chalmers <[email protected]>

[ Upstream commit 53c81fc7875bc2dca358485dac3999e14ec91a00 ]

[WHY]
Some panels return a link rate of 0 (unknown) in DPCD 0. In this case, an appropriate mode cannot be set, and certain panels will show corruption as they are forced to use a mode they do not support.

[HOW]
Read DPCD 10 in the case where supported link rate from DPCD 0 is unknown, and pass that value on to the reported link rate. This re-introduces behaviour present in previous versions that appears to have been accidentally removed.

---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +6 -3
index 1ee544a32ebb..253311864cdd 100644
@@ -1624,8 +1624,7 @@ static bool decide_edp_link_settings(struct dc_link *link, struct dc_link_settin
 	uint32_t link_bw;
 
 	if (link->dpcd_caps.dpcd_rev.raw < DPCD_REV_14 ||
-			link->dpcd_caps.edp_supported_link_rates_count == 0 ||
-			link->dc->config.optimize_edp_link_rate == false) {
+			link->dpcd_caps.edp_supported_link_rates_count == 0) {
 		*link_setting = link->verified_link_cap;
 		return true;
 	}
@@ -2597,7 +2596,8 @@ void detect_edp_sink_caps(struct dc_link *link)
 	memset(supported_link_rates, 0, sizeof(supported_link_rates));
 
 	if (link->dpcd_caps.dpcd_rev.raw >= DPCD_REV_14 &&
-			link->dc->config.optimize_edp_link_rate) {
+			(link->dc->config.optimize_edp_link_rate ||
+			link->reported_link_cap.link_rate == LINK_RATE_UNKNOWN)) {
 		// Read DPCD 00010h - 0001Fh 16 bytes at one shot
 		core_link_read_dpcd(link, DP_SUPPORTED_LINK_RATES,
 							supported_link_rates, sizeof(supported_link_rates));
@@ -2612,6 +2612,9 @@ void detect_edp_sink_caps(struct dc_link *link)
 				link_rate = linkRateInKHzToLinkRateMultiplier(link_rate_in_khz);
 				link->dpcd_caps.edp_supported_link_rates[link->dpcd_caps.edp_supported_link_rates_count] = link_rate;
 				link->dpcd_caps.edp_supported_link_rates_count++;
+
+				if (link->reported_link_cap.link_rate < link_rate)
+					link->reported_link_cap.link_rate = link_rate;
 			}
 		}
 	}
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#57 lore raw

PATCH 54/171 drm/virtio: Add memory barriers for capset cache.

In reply to Sasha Levin

From: David Riley <[email protected]>

[ Upstream commit 9ff3a5c88e1f1ab17a31402b96d45abe14aab9d7 ]

After data is copied to the cache entry, atomic_set is used indicate that the data is the entry is valid without appropriate memory barriers. Similarly the read side was missing the corresponding memory barriers.

---
 drivers/gpu/drm/virtio/virtgpu_ioctl.c | 3 +++
 drivers/gpu/drm/virtio/virtgpu_vq.c    | 2 ++
 2 files changed, 5 insertions(+)
drivers/gpu/drm/virtio/virtgpu_ioctl.c +3 -0
index 949a264985fc..19fbffd0f7a3 100644
@@ -542,6 +542,9 @@ static int virtio_gpu_get_caps_ioctl(struct drm_device *dev,
 	if (!ret)
 		return -EBUSY;
 
+	/* is_valid check must proceed before copy of the cache entry. */
+	smp_rmb();
+
 	ptr = cache_ent->caps_cache;
 
 copy_exit:
drivers/gpu/drm/virtio/virtgpu_vq.c +2 -0
index 5bb0f0a084e9..a7684f9c80db 100644
@@ -583,6 +583,8 @@ static void virtio_gpu_cmd_capset_cb(struct virtio_gpu_device *vgdev,
 		    cache_ent->id == le32_to_cpu(cmd->capset_id)) {
 			memcpy(cache_ent->caps_cache, resp->capset_data,
 			       cache_ent->size);
+			/* Copy must occur before is_valid is signalled. */
+			smp_wmb();
 			atomic_set(&cache_ent->is_valid, 1);
 			break;
 		}
Signature · 1 line
2.20.1
author maintainer
#59 lore raw

PATCH 55/171 drm/amd/display: set link->dongle_max_pix_clk to 0 on a disconnect

In reply to Sasha Levin

From: Samson Tam <[email protected]>

[ Upstream commit 233d87a579b8adcc6da5823fa507ecb6675e7562 ]

[Why]
Found issue in EDID Emulation where if we connect a display using
a passive HDMI-DP dongle, disconnect it and then try to emulate a display using DP, we could not see 4K modes. This was because on a disconnect, dongle_max_pix_clk was still set so when we emulate using DP, in dc_link_validate_mode_timing(), it would think we were still using a dongle and limit the modes we support.

[How]
In dc_link_detect(), set dongle_max_pix_clk to 0 when we detect
a hotplug out ( if new_connection_type = dc_connection_none ).

---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/gpu/drm/amd/display/dc/core/dc_link.c +6 -0
index b37ecc3ede61..a3ff33ff6da1 100644
@@ -960,6 +960,12 @@ bool dc_link_detect(struct dc_link *link, enum dc_detect_reason reason)
 
 		link->type = dc_connection_none;
 		sink_caps.signal = SIGNAL_TYPE_NONE;
+		/* When we unplug a passive DP-HDMI dongle connection, dongle_max_pix_clk
+		 *  is not cleared. If we emulate a DP signal on this connection, it thinks
+		 *  the dongle is still there and limits the number of modes we can emulate.
+		 *  Clear dongle_max_pix_clk on disconnect to fix this
+		 */
+		link->dongle_max_pix_clk = 0;
 	}
 
 	LINK_INFO("link=%d, dc_sink_in=%p is now %s prev_sink=%p dpcd same=%d edid same=%d\n",
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#61 lore raw

PATCH 57/171 drm/amd/display: fix compilation error

In reply to Sasha Levin

From: Hariprasad Kelam <[email protected]>

[ Upstream commit 88099f53cc3717437f5fc9cf84205c5b65118377 ]

this patch fixes below compilation error

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c: In function ‘dcn10_apply_ctx_for_surface’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:2378:3:
error: implicit declaration of function ‘udelay’ [-Werror=implicit-function-declaration]
udelay(underflow_check_delay_us);

---
 drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c +1 -0
index 33d311cea28c..9e4d70a0055e 100644
@@ -23,6 +23,7 @@
  *
  */
 
+#include <linux/delay.h>
 #include "dm_services.h"
 #include "core_types.h"
 #include "resource.h"
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#62 lore raw

PATCH 58/171 sunhv: Fix device naming inconsistency between sunhv_console and sunhv_reg

In reply to Sasha Levin

From: John Paul Adrian Glaubitz <[email protected]>

[ Upstream commit 07a6d63eb1b54b5fb38092780fe618dfe1d96e23 ]

In d5a2aa24, the name in struct console sunhv_console was changed from "ttyS" to "ttyHV" while the name in struct uart_ops sunhv_pops remained unchanged.

This results in the hypervisor console device to be listed as "ttyHV0" under /proc/consoles while the device node is still named "ttyS0":

root@osaka:~# cat /proc/consoles
ttyHV0               -W- (EC p  )    4:64
tty0                 -WU (E     )    4:1
root@osaka:~# readlink /sys/dev/char/4:64
../../devices/root/f02836f0/f0285690/tty/ttyS0
root@osaka:~#

This means that any userland code which tries to determine the name of the device file of the hypervisor console device can not rely on the information provided by /proc/consoles. In particular, booting current versions of debian- installer inside a SPARC LDOM will fail with the installer unable to determine the console device.

After renaming the device in struct uart_ops sunhv_pops to "ttyHV" as well, the inconsistency is fixed and it is possible again to determine the name of the device file of the hypervisor console device by reading the contents of /proc/console:

root@osaka:~# cat /proc/consoles
ttyHV0               -W- (EC p  )    4:64
tty0                 -WU (E     )    4:1
root@osaka:~# readlink /sys/dev/char/4:64
../../devices/root/f02836f0/f0285690/tty/ttyHV0
root@osaka:~#

With this change, debian-installer works correctly when installing inside a SPARC LDOM.

---
 drivers/tty/serial/sunhv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/tty/serial/sunhv.c +1 -1
index 63e34d868de8..f8503f8fc44e 100644
@@ -397,7 +397,7 @@ static const struct uart_ops sunhv_pops = {
 static struct uart_driver sunhv_reg = {
 	.owner			= THIS_MODULE,
 	.driver_name		= "sunhv",
-	.dev_name		= "ttyS",
+	.dev_name		= "ttyHV",
 	.major			= TTY_MAJOR,
 };
 
Signature · 1 line
2.20.1
author maintainer
#66 lore raw

PATCH 62/171 drm/rockchip: Properly adjust to a true clock in adjusted_mode

In reply to Sasha Levin

From: Douglas Anderson <[email protected]>

[ Upstream commit 99b9683f2142b20bad78e61f7f829e8714e45685 ]

When fixing up the clock in vop_crtc_mode_fixup() we're not doing it quite correctly. Specifically if we've got the true clock 266666667 Hz, we'll perform this calculation:
266666667 / 1000 => 266666

Later when we try to set the clock we'll do clk_set_rate(266666 * 1000). The common clock framework won't actually pick the proper clock in this case since it always wants clocks <= the specified one.

Let's solve this by using DIV_ROUND_UP.

---
 drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/rockchip/rockchip_drm_vop.c +2 -1
index 12ed5265a90b..09046135e720 100644
@@ -1011,7 +1011,8 @@ static bool vop_crtc_mode_fixup(struct drm_crtc *crtc,
 	struct vop *vop = to_vop(crtc);
 
 	adjusted_mode->clock =
-		clk_round_rate(vop->dclk, mode->clock * 1000) / 1000;
+		DIV_ROUND_UP(clk_round_rate(vop->dclk, mode->clock * 1000),
+			     1000);
 
 	return true;
 }
Signature · 1 line
2.20.1
author maintainer
#67 lore raw

PATCH 63/171 platform/x86: asus-wmi: Increase input buffer size of WMI methods

In reply to Sasha Levin

From: Yurii Pavlovskyi <[email protected]>

[ Upstream commit 98e865a522983f2afde075648ec9d15ea4bb9194 ]

The asus-nb-wmi driver is matched by WMI alias but fails to load on TUF Gaming series laptops producing multiple ACPI errors in the kernel log.

The input buffer for WMI method invocation size is 2 dwords, whereas 3 are expected by this model.

FX505GM:
..
Method (WMNB, 3, Serialized)

{
    P8XH (Zero, 0x11)
    CreateDWordField (Arg2, Zero, IIA0)
    CreateDWordField (Arg2, 0x04, IIA1)
    CreateDWordField (Arg2, 0x08, IIA2)
    Local0 = (Arg1 & 0xFFFFFFFF)
    ...

Compare with older K54C:
...
Method (WMNB, 3, NotSerialized)

{
    CreateDWordField (Arg2, 0x00, IIA0)
    CreateDWordField (Arg2, 0x04, IIA1)
    Local0 = (Arg1 & 0xFFFFFFFF)
    ...

Increase buffer size to 3 dwords. No negative consequences of this change are expected, as the input buffer size is not verified. The original function is replaced by a wrapper for a new method passing value 0 for the last parameter. The new function will be used to control RGB keyboard backlight.

---
 drivers/platform/x86/asus-wmi.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/platform/x86/asus-wmi.c +9 -1
index 9b18a184e0aa..abfa99d18fea 100644
@@ -85,6 +85,7 @@ static bool ashs_present(void)
 struct bios_args {
 	u32 arg0;
 	u32 arg1;
+	u32 arg2; /* At least TUF Gaming series uses 3 dword input buffer. */
 } __packed;
 
 /*
@@ -211,11 +212,13 @@ static void asus_wmi_input_exit(struct asus_wmi *asus)
 	asus->inputdev = NULL;
 }
 
-int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, u32 *retval)
+static int asus_wmi_evaluate_method3(u32 method_id,
+		u32 arg0, u32 arg1, u32 arg2, u32 *retval)
 {
 	struct bios_args args = {
 		.arg0 = arg0,
 		.arg1 = arg1,
+		.arg2 = arg2,
 	};
 	struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
 	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -247,6 +250,11 @@ int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, u32 *retval)
 
 	return 0;
 }
+
+int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, u32 *retval)
+{
+	return asus_wmi_evaluate_method3(method_id, arg0, arg1, 0, retval);
+}
 EXPORT_SYMBOL_GPL(asus_wmi_evaluate_method);
 
 static int asus_wmi_evaluate_method_agfn(const struct acpi_buffer args)
Signature · 1 line
2.20.1
author maintainer
#70 lore raw

PATCH 66/171 serial: imx: fix locking in set_termios()

In reply to Sasha Levin

From: Sergey Organov <[email protected]>

[ Upstream commit 4e828c3e09201512be5ee162393f334321f7cf01 ]

imx_uart_set_termios() called imx_uart_rts_active(), or imx_uart_rts_inactive() before taking port->port.lock.

As a consequence, sport->port.mctrl that these functions modify could have been changed without holding port->port.lock.

Moved locking of port->port.lock above the calls to fix the issue.

---
 drivers/tty/serial/imx.c | 23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)
drivers/tty/serial/imx.c +13 -10
index 8b752e895053..10db3e54ac9e 100644
@@ -383,6 +383,7 @@ static void imx_uart_ucrs_restore(struct imx_port *sport,
 }
 #endif
 
+/* called with port.lock taken and irqs caller dependent */
 static void imx_uart_rts_active(struct imx_port *sport, u32 *ucr2)
 {
 	*ucr2 &= ~(UCR2_CTSC | UCR2_CTS);
@@ -391,6 +392,7 @@ static void imx_uart_rts_active(struct imx_port *sport, u32 *ucr2)
 	mctrl_gpio_set(sport->gpios, sport->port.mctrl);
 }
 
+/* called with port.lock taken and irqs caller dependent */
 static void imx_uart_rts_inactive(struct imx_port *sport, u32 *ucr2)
 {
 	*ucr2 &= ~UCR2_CTSC;
@@ -400,6 +402,7 @@ static void imx_uart_rts_inactive(struct imx_port *sport, u32 *ucr2)
 	mctrl_gpio_set(sport->gpios, sport->port.mctrl);
 }
 
+/* called with port.lock taken and irqs caller dependent */
 static void imx_uart_rts_auto(struct imx_port *sport, u32 *ucr2)
 {
 	*ucr2 |= UCR2_CTSC;
@@ -1549,6 +1552,16 @@ imx_uart_set_termios(struct uart_port *port, struct ktermios *termios,
 		old_csize = CS8;
 	}
 
+	del_timer_sync(&sport->timer);
+
+	/*
+	 * Ask the core to calculate the divisor for us.
+	 */
+	baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
+	quot = uart_get_divisor(port, baud);
+
+	spin_lock_irqsave(&sport->port.lock, flags);
+
 	if ((termios->c_cflag & CSIZE) == CS8)
 		ucr2 = UCR2_WS | UCR2_SRST | UCR2_IRTS;
 	else
@@ -1592,16 +1605,6 @@ imx_uart_set_termios(struct uart_port *port, struct ktermios *termios,
 			ucr2 |= UCR2_PROE;
 	}
 
-	del_timer_sync(&sport->timer);
-
-	/*
-	 * Ask the core to calculate the divisor for us.
-	 */
-	baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
-	quot = uart_get_divisor(port, baud);
-
-	spin_lock_irqsave(&sport->port.lock, flags);
-
 	sport->port.read_status_mask = 0;
 	if (termios->c_iflag & INPCK)
 		sport->port.read_status_mask |= (URXD_FRMERR | URXD_PRERR);
Signature · 1 line
2.20.1
author maintainer
#71 lore raw

PATCH 67/171 serial: uartps: Use the same dynamic major number for all ports

In reply to Sasha Levin

From: Shubhrajyoti Datta <[email protected]>

[ Upstream commit ab262666018de6f4e206b021386b93ed0c164316 ]

Let kernel to find out major number dynamically for the first device and then reuse it for other instances.
This fixes the issue that each uart is registered with a different major number.

After the patch:

crw-------    1 root     root      253,   0 Jun 10 08:31 /dev/ttyPS0
crw--w----    1 root     root      253,   1 Jan  1  1970 /dev/ttyPS1
Fixes 024ca329bfb9 ("serial: uartps: Register own uart console and driver structures")
---
 drivers/tty/serial/xilinx_uartps.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/tty/serial/xilinx_uartps.c +3 -2
index 605354fd60b1..9dcc4d855ddd 100644
@@ -29,12 +29,12 @@
 
 #define CDNS_UART_TTY_NAME	"ttyPS"
 #define CDNS_UART_NAME		"xuartps"
-#define CDNS_UART_MAJOR		0	/* use dynamic node allocation */
 #define CDNS_UART_FIFO_SIZE	64	/* FIFO size */
 #define CDNS_UART_REGISTER_SPACE	0x1000
 
 /* Rx Trigger level */
 static int rx_trigger_level = 56;
+static int uartps_major;
 module_param(rx_trigger_level, uint, S_IRUGO);
 MODULE_PARM_DESC(rx_trigger_level, "Rx trigger level, 1-63 bytes");
 
@@ -1517,7 +1517,7 @@ static int cdns_uart_probe(struct platform_device *pdev)
 	cdns_uart_uart_driver->owner = THIS_MODULE;
 	cdns_uart_uart_driver->driver_name = driver_name;
 	cdns_uart_uart_driver->dev_name	= CDNS_UART_TTY_NAME;
-	cdns_uart_uart_driver->major = CDNS_UART_MAJOR;
+	cdns_uart_uart_driver->major = uartps_major;
 	cdns_uart_uart_driver->minor = cdns_uart_data->id;
 	cdns_uart_uart_driver->nr = 1;
 
@@ -1546,6 +1546,7 @@ static int cdns_uart_probe(struct platform_device *pdev)
 		goto err_out_id;
 	}
 
+	uartps_major = cdns_uart_uart_driver->tty_driver->major;
 	cdns_uart_data->cdns_uart_driver = cdns_uart_uart_driver;
 
 	/*
Signature · 1 line
2.20.1
author maintainer
#72 lore raw

PATCH 68/171 tty: serial_core: Set port active bit in uart_port_activate

In reply to Sasha Levin

From: Serge Semin <[email protected]>

[ Upstream commit 13b18d35909707571af9539f7731389fbf0feb31 ]

A bug was introduced by commit b3b576461864 ("tty: serial_core: convert uart_open to use tty_port_open"). It caused a constant warning printed into the system log regarding the tty and port counter mismatch:

[   21.644197] ttyS ttySx: tty_port_close_start: tty->count = 1 port count = 2

in case if session hangup was detected so the warning is printed starting from the second open-close iteration.

Particularly the problem was discovered in situation when there is a serial tty device without hardware back-end being setup. It is considered by the tty-serial subsystems as a hardware problem with session hang up. In this case uart_startup() will return a positive value with TTY_IO_ERROR flag set in corresponding tty_struct instance. The same value will get passed to be returned from the activate() callback and then being returned from tty_port_open(). But since in this case tty_port_block_til_ready() isn't called the TTY_PORT_ACTIVE flag isn't set (while the method had been called before tty_port_open conversion was introduced and the rest of the subsystem code expected the bit being set in this case), which prevents the uart_hangup() method to perform any cleanups including the tty port counter setting to zero. So the next attempt to open/close the tty device will discover the counters mismatch.

In order to fix the problem we need to manually set the TTY_PORT_ACTIVE flag in case if uart_startup() returned a positive value. In this case the hang up procedure will perform a full set of cleanup actions including the port ref-counter resetting.

Fixes b3b576461864 "tty: serial_core: convert uart_open to use tty_port_open"
---
 drivers/tty/serial/serial_core.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/tty/serial/serial_core.c +6 -1
index 83f4dd0bfd74..4223cb496764 100644
@@ -1777,6 +1777,7 @@ static int uart_port_activate(struct tty_port *port, struct tty_struct *tty)
 {
 	struct uart_state *state = container_of(port, struct uart_state, port);
 	struct uart_port *uport;
+	int ret;
 
 	uport = uart_port_check(state);
 	if (!uport || uport->flags & UPF_DEAD)
@@ -1787,7 +1788,11 @@ static int uart_port_activate(struct tty_port *port, struct tty_struct *tty)
 	/*
 	 * Start up the serial port.
 	 */
-	return uart_startup(tty, state, 0);
+	ret = uart_startup(tty, state, 0);
+	if (ret > 0)
+		tty_port_set_active(port, 1);
+
+	return ret;
 }
 
 static const char *uart_type(struct uart_port *port)
Signature · 1 line
2.20.1
author maintainer
#77 lore raw

PATCH 73/171 mmc: sdhci: sdhci-pci-o2micro: Check if controller supports 8-bit width

In reply to Sasha Levin

From: Raul E Rangel <[email protected]>

[ Upstream commit de23f0b757766d9fae59df97da6e8bdc5b231351 ]

The O2 controller supports 8-bit EMMC access.

JESD84-B51 section A.6.3.a defines the bus testing procedure that mmc_select_bus_width() implements. This is used to determine the actual bus width of the eMMC.

---
 drivers/mmc/host/sdhci-pci-o2micro.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
drivers/mmc/host/sdhci-pci-o2micro.c +11 -1
index dd21315922c8..9dc4548271b4 100644
@@ -395,11 +395,21 @@ int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
 {
 	struct sdhci_pci_chip *chip;
 	struct sdhci_host *host;
-	u32 reg;
+	u32 reg, caps;
 	int ret;
 
 	chip = slot->chip;
 	host = slot->host;
+
+	caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+
+	/*
+	 * mmc_select_bus_width() will test the bus to determine the actual bus
+	 * width.
+	 */
+	if (caps & SDHCI_CAN_DO_8BIT)
+		host->mmc->caps |= MMC_CAP_8_BIT_DATA;
+
 	switch (chip->pdev->device) {
 	case PCI_DEVICE_ID_O2_SDS0:
 	case PCI_DEVICE_ID_O2_SEABIRD0:
Signature · 1 line
2.20.1
author maintainer
#80 lore raw

PATCH 76/171 drm/msm/adreno: Ensure that the zap shader region is big enough

In reply to Sasha Levin

From: Jordan Crouse <[email protected]>

[ Upstream commit 6672e11cad662ce6631e04c38f92a140a99c042c ]

Before loading the zap shader we should ensure that the reserved memory region is big enough to hold the loaded file.

---
 drivers/gpu/drm/msm/adreno/adreno_gpu.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/gpu/drm/msm/adreno/adreno_gpu.c +7 -1
index a9c0ac937b00..9acbbc0f3232 100644
@@ -56,7 +56,6 @@ static int zap_shader_load_mdt(struct msm_gpu *gpu, const char *fwname,
 		return ret;
 
 	mem_phys = r.start;
-	mem_size = resource_size(&r);
 
 	/* Request the MDT file for the firmware */
 	fw = adreno_request_fw(to_adreno_gpu(gpu), fwname);
@@ -72,6 +71,13 @@ static int zap_shader_load_mdt(struct msm_gpu *gpu, const char *fwname,
 		goto out;
 	}
 
+	if (mem_size > resource_size(&r)) {
+		DRM_DEV_ERROR(dev,
+			"memory region is too small to load the MDT\n");
+		ret = -E2BIG;
+		goto out;
+	}
+
 	/* Allocate memory for the firmware image */
 	mem_region = memremap(mem_phys, mem_size,  MEMREMAP_WC);
 	if (!mem_region) {
Signature · 6 lines
2.20.1

_______________________________________________
Freedreno mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/freedreno
author maintainer
#82 lore raw

PATCH 78/171 drm/msm: Depopulate platform on probe failure

In reply to Sasha Levin

From: Sean Paul <[email protected]>

[ Upstream commit 4368a1539c6b41ac3cddc06f5a5117952998804c ]

add_display_components() calls of_platform_populate, and we depopluate on pdev remove, but not when probe fails. So if we get a probe deferral in one of the components, we won't depopulate the platform. This causes the core to keep references to devices which should be destroyed, which causes issues when those same devices try to re-initialize on the next probe attempt.

I think this is the reason we had issues with the gmu's device-managed resources on deferral (worked around in commit 94e3a17f33a5).

---
 drivers/gpu/drm/msm/msm_drv.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)
drivers/gpu/drm/msm/msm_drv.c +11 -3
index f38d7367bd3b..4a0fe8a25ad7 100644
@@ -1306,16 +1306,24 @@ static int msm_pdev_probe(struct platform_device *pdev)
 
 	ret = add_gpu_components(&pdev->dev, &match);
 	if (ret)
-		return ret;
+		goto fail;
 
 	/* on all devices that I am aware of, iommu's which can map
 	 * any address the cpu can see are used:
 	 */
 	ret = dma_set_mask_and_coherent(&pdev->dev, ~0);
 	if (ret)
-		return ret;
+		goto fail;
+
+	ret = component_master_add_with_match(&pdev->dev, &msm_drm_ops, match);
+	if (ret)
+		goto fail;
 
-	return component_master_add_with_match(&pdev->dev, &msm_drm_ops, match);
+	return 0;
+
+fail:
+	of_platform_depopulate(&pdev->dev);
+	return ret;
 }
 
 static int msm_pdev_remove(struct platform_device *pdev)
Signature · 6 lines
2.20.1

_______________________________________________
Freedreno mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/freedreno
author maintainer
#83 lore raw

PATCH 79/171 serial: mctrl_gpio: Check if GPIO property exisits before requesting it

In reply to Sasha Levin

From: Stefan Roese <[email protected]>

[ Upstream commit d99482673f950817b30caf3fcdfb31179b050ce1 ]

This patch adds a check for the GPIOs property existence, before the GPIO is requested. This fixes an issue seen when the 8250 mctrl_gpio support is added (2nd patch in this patch series) on x86 platforms using ACPI.

Here Mika's comments from 2016-08-09:

"
I noticed that with v4.8-rc1 serial console of some of our Broxton systems does not work properly anymore. I'm able to see output but input does not work.

I bisected it down to commit 4ef03d328769eddbfeca1f1c958fdb181a69c341 ("tty/serial/8250: use mctrl_gpio helpers").

The reason why it fails is that in ACPI we do not have names for GPIOs (except when _DSD is used) so we use the "idx" to index into _CRS GPIO resources. Now mctrl_gpio_init_noauto() goes through a list of GPIOs calling devm_gpiod_get_index_optional() passing "idx" of 0 for each. The UART device in Broxton has following (simplified) ACPI description:

    Device (URT4)
    {
        ...
        Name (_CRS, ResourceTemplate () {
            GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
                    "\\_SB.GPO0", 0x00, ResourceConsumer)
            {
                0x003A
            }
            GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
                    "\\_SB.GPO0", 0x00, ResourceConsumer)
            {
                0x003D
            }
        })

In this case it finds the first GPIO (0x003A which happens to be RX pin for that UART), turns it into GPIO which then breaks input for the UART device. This also breaks systems with bluetooth connected to UART (those typically have some GPIOs in their _CRS).

Any ideas how to fix this?

We cannot just drop the _CRS index lookup fallback because that would break many existing machines out there so maybe we can limit this to only DT enabled machines. Or alternatively probe if the property first exists before trying to acquire the GPIOs (using device_property_present()).
"

This patch implements the fix suggested by Mika in his statement above.

---
 drivers/tty/serial/serial_mctrl_gpio.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
drivers/tty/serial/serial_mctrl_gpio.c +14 -0
index 39ed56214cd3..2b400189be91 100644
@@ -12,6 +12,7 @@
 #include <linux/termios.h>
 #include <linux/serial_core.h>
 #include <linux/module.h>
+#include <linux/property.h>
 
 #include "serial_mctrl_gpio.h"
 
@@ -116,6 +117,19 @@ struct mctrl_gpios *mctrl_gpio_init_noauto(struct device *dev, unsigned int idx)
 
 	for (i = 0; i < UART_GPIO_MAX; i++) {
 		enum gpiod_flags flags;
+		char *gpio_str;
+		bool present;
+
+		/* Check if GPIO property exists and continue if not */
+		gpio_str = kasprintf(GFP_KERNEL, "%s-gpios",
+				     mctrl_gpios_desc[i].name);
+		if (!gpio_str)
+			continue;
+
+		present = device_property_present(dev, gpio_str);
+		kfree(gpio_str);
+		if (!present)
+			continue;
 
 		if (mctrl_gpios_desc[i].dir_out)
 			flags = GPIOD_OUT_LOW;
Signature · 1 line
2.20.1
author maintainer
#87 lore raw

PATCH 83/171 i2c: stm32f7: fix the get_irq error cases

In reply to Sasha Levin

From: Fabrice Gasnier <[email protected]>

[ Upstream commit 79b4499524ed659fb76323efc30f3dc03967c88f ]

During probe, return the "get_irq" error value instead of -EINVAL which allows the driver to be deferred probed if needed.
Fix also the case where of_irq_get() returns a negative value. Note :
On failure of_irq_get() returns 0 or a negative value while platform_get_irq() returns a negative value.

Fixes aeb068c57214 ("i2c: i2c-stm32f7: add driver")
---
 drivers/i2c/busses/i2c-stm32f7.c | 26 ++++++++++++++------------
 1 file changed, 14 insertions(+), 12 deletions(-)
drivers/i2c/busses/i2c-stm32f7.c +14 -12
index 48337bef5b87..3d90c0bb049e 100644
@@ -25,7 +25,6 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/pinctrl/consumer.h>
@@ -1816,15 +1815,14 @@ static struct i2c_algorithm stm32f7_i2c_algo = {
 
 static int stm32f7_i2c_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
 	struct stm32f7_i2c_dev *i2c_dev;
 	const struct stm32f7_i2c_setup *setup;
 	struct resource *res;
-	u32 irq_error, irq_event, clk_rate, rise_time, fall_time;
+	u32 clk_rate, rise_time, fall_time;
 	struct i2c_adapter *adap;
 	struct reset_control *rst;
 	dma_addr_t phy_addr;
-	int ret;
+	int irq_error, irq_event, ret;
 
 	i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
 	if (!i2c_dev)
@@ -1836,16 +1834,20 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 		return PTR_ERR(i2c_dev->base);
 	phy_addr = (dma_addr_t)res->start;
 
-	irq_event = irq_of_parse_and_map(np, 0);
-	if (!irq_event) {
-		dev_err(&pdev->dev, "IRQ event missing or invalid\n");
-		return -EINVAL;
+	irq_event = platform_get_irq(pdev, 0);
+	if (irq_event <= 0) {
+		if (irq_event != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to get IRQ event: %d\n",
+				irq_event);
+		return irq_event ? : -ENOENT;
 	}
 
-	irq_error = irq_of_parse_and_map(np, 1);
-	if (!irq_error) {
-		dev_err(&pdev->dev, "IRQ error missing or invalid\n");
-		return -EINVAL;
+	irq_error = platform_get_irq(pdev, 1);
+	if (irq_error <= 0) {
+		if (irq_error != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to get IRQ error: %d\n",
+				irq_error);
+		return irq_error ? : -ENOENT;
 	}
 
 	i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
Signature · 1 line
2.20.1
author maintainer
#95 lore raw

PATCH 91/171 dt-bindings: backlight: lm3630a: correct schema validation

In reply to Sasha Levin

From: Brian Masney <[email protected]>

[ Upstream commit ef4db28c1f45cda6989bc8a8e45294894786d947 ]

The '#address-cells' and '#size-cells' properties were not defined in the lm3630a bindings and would cause the following error when attempting to validate the examples against the schema:

Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml:
'#address-cells', '#size-cells' do not match any of the regexes:
'^led@[01]$', 'pinctrl-[0-9]+'

Correct this by adding those two properties.

While we're here, move the ti,linear-mapping-mode property to the led@[01] child nodes to correct the following validation error:

Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml:
led@0: 'ti,linear-mapping-mode' does not match any of the regexes:
'pinctrl-[0-9]+'

Fixes 32fcb75c66a0 ("dt-bindings: backlight: Add lm3630a bindings")
[robh: also drop maxItems from child reg]
---
 .../leds/backlight/lm3630a-backlight.yaml     | 21 ++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)
Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml +14 -7
index 4d61fe0a98a4..dc129d9a329e 100644
@@ -23,16 +23,17 @@ properties:
   reg:
     maxItems: 1
 
-  ti,linear-mapping-mode:
-    description: |
-      Enable linear mapping mode. If disabled, then it will use exponential
-      mapping mode in which the ramp up/down appears to have a more uniform
-      transition to the human eye.
-    type: boolean
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
 
 required:
   - compatible
   - reg
+  - '#address-cells'
+  - '#size-cells'
 
 patternProperties:
   "^led@[01]$":
@@ -48,7 +49,6 @@ patternProperties:
           in this property. The two current sinks can be controlled
           independently with both banks, or bank A can be configured to control
           both sinks with the led-sources property.
-        maxItems: 1
         minimum: 0
         maximum: 1
 
@@ -73,6 +73,13 @@ patternProperties:
         minimum: 0
         maximum: 255
 
+      ti,linear-mapping-mode:
+        description: |
+          Enable linear mapping mode. If disabled, then it will use exponential
+          mapping mode in which the ramp up/down appears to have a more uniform
+          transition to the human eye.
+        type: boolean
+
     required:
       - reg
 
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#113 lore raw

PATCH 109/171 serial: sh-sci: Terminate TX DMA during buffer flushing

In reply to Sasha Levin

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 775b7ffd7d6d5db320d99b0a485c51e04dfcf9f1 ]

While the .flush_buffer() callback clears sci_port.tx_dma_len since commit 1cf4a7efdc71cab8 ("serial: sh-sci: Fix race condition causing garbage during shutdown"), it does not terminate a transmit DMA operation that may be in progress.

Fix this by terminating any pending DMA operations, and resetting the corresponding cookie.

---
 drivers/tty/serial/sh-sci.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
drivers/tty/serial/sh-sci.c +9 -2
index abc705716aa0..1d25c4e2d0d2 100644
@@ -1648,11 +1648,18 @@ static void sci_free_dma(struct uart_port *port)
 
 static void sci_flush_buffer(struct uart_port *port)
 {
+	struct sci_port *s = to_sci_port(port);
+
 	/*
 	 * In uart_flush_buffer(), the xmit circular buffer has just been
-	 * cleared, so we have to reset tx_dma_len accordingly.
+	 * cleared, so we have to reset tx_dma_len accordingly, and stop any
+	 * pending transfers
 	 */
-	to_sci_port(port)->tx_dma_len = 0;
+	s->tx_dma_len = 0;
+	if (s->chan_tx) {
+		dmaengine_terminate_async(s->chan_tx);
+		s->cookie_tx = -EINVAL;
+	}
 }
 #else /* !CONFIG_SERIAL_SH_SCI_DMA */
 static inline void sci_request_dma(struct uart_port *port)
Signature · 1 line
2.20.1
author maintainer
#114 lore raw

PATCH 110/171 serial: sh-sci: Fix TX DMA buffer flushing and workqueue races

In reply to Sasha Levin

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 8493eab02608b0e82f67b892aa72882e510c31d0 ]

When uart_flush_buffer() is called, the .flush_buffer() callback zeroes the tx_dma_len field. This may race with the work queue function handling transmit DMA requests:

1. If the buffer is flushed before the first DMA API call, dmaengine_prep_slave_single() may be called with a zero length, causing the DMA request to never complete, leading to messages like:

rcar-dmac e7300000.dma-controller: Channel Address Error happen

and, with debug enabled:

sh-sci e6e88000.serial: sci_dma_tx_work_fn: ffff800639b55000: 0...0, cookie 126

and DMA timeouts.

2. If the buffer is flushed after the first DMA API call, but before the second, dma_sync_single_for_device() may be called with a zero length, causing the transmit data not to be flushed to RAM, and leading to stale data being output.

Fix this by:
1. Letting sci_dma_tx_work_fn() return immediately if the transmit buffer is empty,
2. Extending the critical section to cover all DMA preparational work, so tx_dma_len stays consistent for all of it,
3. Using local copies of circ_buf.head and circ_buf.tail, to make sure they match the actual operation above.

---
 drivers/tty/serial/sh-sci.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)
drivers/tty/serial/sh-sci.c +15 -7
index 1d25c4e2d0d2..d18c680aa64b 100644
@@ -1398,6 +1398,7 @@ static void sci_dma_tx_work_fn(struct work_struct *work)
 	struct circ_buf *xmit = &port->state->xmit;
 	unsigned long flags;
 	dma_addr_t buf;
+	int head, tail;
 
 	/*
 	 * DMA is idle now.
@@ -1407,16 +1408,23 @@ static void sci_dma_tx_work_fn(struct work_struct *work)
 	 * consistent xmit buffer state.
 	 */
 	spin_lock_irq(&port->lock);
-	buf = s->tx_dma_addr + (xmit->tail & (UART_XMIT_SIZE - 1));
+	head = xmit->head;
+	tail = xmit->tail;
+	buf = s->tx_dma_addr + (tail & (UART_XMIT_SIZE - 1));
 	s->tx_dma_len = min_t(unsigned int,
-		CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE),
-		CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE));
-	spin_unlock_irq(&port->lock);
+		CIRC_CNT(head, tail, UART_XMIT_SIZE),
+		CIRC_CNT_TO_END(head, tail, UART_XMIT_SIZE));
+	if (!s->tx_dma_len) {
+		/* Transmit buffer has been flushed */
+		spin_unlock_irq(&port->lock);
+		return;
+	}
 
 	desc = dmaengine_prep_slave_single(chan, buf, s->tx_dma_len,
 					   DMA_MEM_TO_DEV,
 					   DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc) {
+		spin_unlock_irq(&port->lock);
 		dev_warn(port->dev, "Failed preparing Tx DMA descriptor\n");
 		goto switch_to_pio;
 	}
@@ -1424,18 +1432,18 @@ static void sci_dma_tx_work_fn(struct work_struct *work)
 	dma_sync_single_for_device(chan->device->dev, buf, s->tx_dma_len,
 				   DMA_TO_DEVICE);
 
-	spin_lock_irq(&port->lock);
 	desc->callback = sci_dma_tx_complete;
 	desc->callback_param = s;
-	spin_unlock_irq(&port->lock);
 	s->cookie_tx = dmaengine_submit(desc);
 	if (dma_submit_error(s->cookie_tx)) {
+		spin_unlock_irq(&port->lock);
 		dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n");
 		goto switch_to_pio;
 	}
 
+	spin_unlock_irq(&port->lock);
 	dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n",
-		__func__, xmit->buf, xmit->tail, xmit->head, s->cookie_tx);
+		__func__, xmit->buf, tail, head, s->cookie_tx);
 
 	dma_async_issue_pending(chan);
 	return;
Signature · 1 line
2.20.1
author maintainer
#119 lore raw

PATCH 115/171 PCI: tegra: Enable Relaxed Ordering only for Tegra20 & Tegra30

In reply to Sasha Levin

From: Vidya Sagar <[email protected]>

[ Upstream commit 7be142caabc4780b13a522c485abc806de5c4114 ]

The PCI Tegra controller conversion to a device tree configurable driver in commit d1523b52bff3 ("PCI: tegra: Move PCIe driver to drivers/pci/host") implied that code for the driver can be compiled in for a kernel supporting multiple platforms.

Unfortunately, a blind move of the code did not check that some of the quirks that were applied in arch/arm (eg enabling Relaxed Ordering on all PCI devices - since the quirk hook erroneously matches PCI_ANY_ID for both Vendor-ID and Device-ID) are now applied in all kernels that compile the PCI Tegra controlled driver, DT and ACPI alike.

This is completely wrong, in that enablement of Relaxed Ordering is only required by default in Tegra20 platforms as described in the Tegra20 Technical Reference Manual (available at
https://developer.nvidia.com/embedded/downloads#?search=tegra%202 in Section 34.1, where it is mentioned that Relaxed Ordering bit needs to be enabled in its root ports to avoid deadlock in hardware) and in the Tegra30 platforms for the same reasons (unfortunately not documented in the TRM).

There is no other strict requirement on PCI devices Relaxed Ordering enablement on any other Tegra platforms or PCI host bridge driver.

Fix this quite upsetting situation by limiting the vendor and device IDs to which the Relaxed Ordering quirk applies to the root ports in question, reported above.

---
 drivers/pci/controller/pci-tegra.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/pci/controller/pci-tegra.c +5 -2
index 464ba2538d52..bc7be369c1b3 100644
@@ -545,12 +545,15 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf1, tegra_pcie_fixup_class);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e1c, tegra_pcie_fixup_class);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e1d, tegra_pcie_fixup_class);
 
-/* Tegra PCIE requires relaxed ordering */
+/* Tegra20 and Tegra30 PCIE requires relaxed ordering */
 static void tegra_pcie_relax_enable(struct pci_dev *dev)
 {
 	pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_RELAX_EN);
 }
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_relax_enable);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0bf0, tegra_pcie_relax_enable);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0bf1, tegra_pcie_relax_enable);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0e1c, tegra_pcie_relax_enable);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0e1d, tegra_pcie_relax_enable);
 
 static int tegra_pcie_request_resources(struct tegra_pcie *pcie)
 {
Signature · 1 line
2.20.1
author maintainer
#128 lore raw

PATCH 124/171 rseq/selftests: Fix Thumb mode build failure on arm32

In reply to Sasha Levin

From: Mathieu Desnoyers <[email protected]>

[ Upstream commit ee8a84c60bcc1f1615bd9cb3edfe501e26cdc85b ]

Using ".arm .inst" for the arm signature introduces build issues for programs compiled in Thumb mode because the assembler stays in the arm mode for the rest of the inline assembly. Revert to using a ".word" to express the signature as data instead.

The choice of signature is a valid trap instruction on arm32 little endian, where both code and data are little endian.

ARMv6+ big endian (BE8) generates mixed endianness code vs data:
little-endian code and big-endian data. The data value of the signature needs to have its byte order reversed to generate the trap instruction.

Prior to ARMv6, -mbig-endian generates big-endian code and data (which match), so the endianness of the data representation of the signature should not be reversed. However, the choice between BE32 and BE8 is done by the linker, so we cannot know whether code and data endianness will be mixed before the linker is invoked. So rather than try to play tricks with the linker, the rseq signature is simply data (not a trap instruction) prior to ARMv6 on big endian. This is why the signature is expressed as data (.word) rather than as instruction (.inst) in assembler.

Because a ".word" is used to emit the signature, it will be interpreted as a literal pool by a disassembler, not as an actual instruction. Considering that the signature is not meant to be executed except in scenarios where the program execution is completely bogus, this should not be an issue.

CC Peter Zijlstra <[email protected]>
CC Thomas Gleixner <[email protected]>
CC Joel Fernandes <[email protected]>
CC Catalin Marinas <[email protected]>
CC Dave Watson <[email protected]>
CC Will Deacon <[email protected]>
CC Shuah Khan <[email protected]>
CC Andi Kleen <[email protected]>
CC "H . Peter Anvin" <[email protected]>
CC Chris Lameter <[email protected]>
CC Russell King <[email protected]>
CC Michael Kerrisk <[email protected]>
CC "Paul E . McKenney" <[email protected]>
CC Paul Turner <[email protected]>
CC Boqun Feng <[email protected]>
CC Josh Triplett <[email protected]>
CC Steven Rostedt <[email protected]>
CC Ben Maurer <[email protected]>
CC Andy Lutomirski <[email protected]>
CC Andrew Morton <[email protected]>
CC Linus Torvalds <[email protected]>
CC Carlos O'Donell <[email protected]>
CC Florian Weimer <[email protected]>
---
 tools/testing/selftests/rseq/rseq-arm.h | 61 +++++++++++++------------
 1 file changed, 33 insertions(+), 28 deletions(-)
tools/testing/selftests/rseq/rseq-arm.h +33 -28
index 84f28f147fb6..5943c816c07c 100644
@@ -6,6 +6,8 @@
  */
 
 /*
+ * - ARM little endian
+ *
  * RSEQ_SIG uses the udf A32 instruction with an uncommon immediate operand
  * value 0x5de3. This traps if user-space reaches this instruction by mistake,
  * and the uncommon operand ensures the kernel does not move the instruction
@@ -22,36 +24,40 @@
  * def3        udf    #243      ; 0xf3
  * e7f5        b.n    <7f5>
  *
- * pre-ARMv6 big endian code:
- * e7f5        b.n    <7f5>
- * def3        udf    #243      ; 0xf3
+ * - ARMv6+ big endian (BE8):
  *
  * ARMv6+ -mbig-endian generates mixed endianness code vs data: little-endian
- * code and big-endian data. Ensure the RSEQ_SIG data signature matches code
- * endianness. Prior to ARMv6, -mbig-endian generates big-endian code and data
- * (which match), so there is no need to reverse the endianness of the data
- * representation of the signature. However, the choice between BE32 and BE8
- * is done by the linker, so we cannot know whether code and data endianness
- * will be mixed before the linker is invoked.
+ * code and big-endian data. The data value of the signature needs to have its
+ * byte order reversed to generate the trap instruction:
+ *
+ * Data: 0xf3def5e7
+ *
+ * Translates to this A32 instruction pattern:
+ *
+ * e7f5def3    udf    #24035    ; 0x5de3
+ *
+ * Translates to this T16 instruction pattern:
+ *
+ * def3        udf    #243      ; 0xf3
+ * e7f5        b.n    <7f5>
+ *
+ * - Prior to ARMv6 big endian (BE32):
+ *
+ * Prior to ARMv6, -mbig-endian generates big-endian code and data
+ * (which match), so the endianness of the data representation of the
+ * signature should not be reversed. However, the choice between BE32
+ * and BE8 is done by the linker, so we cannot know whether code and
+ * data endianness will be mixed before the linker is invoked. So rather
+ * than try to play tricks with the linker, the rseq signature is simply
+ * data (not a trap instruction) prior to ARMv6 on big endian. This is
+ * why the signature is expressed as data (.word) rather than as
+ * instruction (.inst) in assembler.
  */
 
-#define RSEQ_SIG_CODE	0xe7f5def3
-
-#ifndef __ASSEMBLER__
-
-#define RSEQ_SIG_DATA							\
-	({								\
-		int sig;						\
-		asm volatile ("b 2f\n\t"				\
-			      "1: .inst " __rseq_str(RSEQ_SIG_CODE) "\n\t" \
-			      "2:\n\t"					\
-			      "ldr %[sig], 1b\n\t"			\
-			      : [sig] "=r" (sig));			\
-		sig;							\
-	})
-
-#define RSEQ_SIG	RSEQ_SIG_DATA
-
+#ifdef __ARMEB__
+#define RSEQ_SIG    0xf3def5e7      /* udf    #24035    ; 0x5de3 (ARMv6+) */
+#else
+#define RSEQ_SIG    0xe7f5def3      /* udf    #24035    ; 0x5de3 */
 #endif
 
 #define rseq_smp_mb()	__asm__ __volatile__ ("dmb" ::: "memory", "cc")
@@ -125,8 +131,7 @@ do {									\
 		__rseq_str(table_label) ":\n\t"				\
 		".word " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \
 		".word " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) ", 0x0\n\t" \
-		".arm\n\t"						\
-		".inst " __rseq_str(RSEQ_SIG_CODE) "\n\t"		\
+		".word " __rseq_str(RSEQ_SIG) "\n\t"			\
 		__rseq_str(label) ":\n\t"				\
 		teardown						\
 		"b %l[" __rseq_str(abort_label) "]\n\t"
Signature · 1 line
2.20.1
author maintainer
#136 lore raw

PATCH 132/171 PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB

In reply to Sasha Levin

From: YueHaibing <[email protected]>

[ Upstream commit 381ed79c8655a40268ee7391f716edd90c5c3a97 ]

If CONFIG_GPIOLIB is not selected the compilation results in the following build errors:

drivers/pci/controller/dwc/pci-dra7xx.c:
In function dra7xx_pcie_probe:
drivers/pci/controller/dwc/pci-dra7xx.c:777:10:
error: implicit declaration of function devm_gpiod_get_optional;
did you mean devm_regulator_get_optional? [-Werror=implicit-function-declaration]

  reset = devm_gpiod_get_optional(dev, NULL, GPIOD_OUT_HIGH);

drivers/pci/controller/dwc/pci-dra7xx.c:778:45: error: ‘GPIOD_OUT_HIGH’ undeclared (first use in this function); did you mean ‘GPIOF_INIT_HIGH’?

  reset = devm_gpiod_get_optional(dev, NULL, GPIOD_OUT_HIGH);
                                             ^~~~~~~~~~~~~~
                                             GPIOF_INIT_HIGH

Fix them by including the appropriate header file.

---
 drivers/pci/controller/dwc/pci-dra7xx.c | 1 +
 1 file changed, 1 insertion(+)
drivers/pci/controller/dwc/pci-dra7xx.c +1 -0
index 419451efd58c..4234ddb4722f 100644
@@ -26,6 +26,7 @@
 #include <linux/types.h>
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
+#include <linux/gpio/consumer.h>
 
 #include "../../pci.h"
 #include "pcie-designware.h"
Signature · 1 line
2.20.1
author maintainer
#139 lore raw

PATCH 135/171 nvme-pci: check for NULL return from pci_alloc_p2pmem()

In reply to Sasha Levin

From: Alan Mikhak <[email protected]>

[ Upstream commit bfac8e9f55cf62a000b643a0081488badbe92d96 ]

Modify nvme_alloc_sq_cmds() to call pci_free_p2pmem() to free the memory it allocated using pci_alloc_p2pmem() in case pci_p2pmem_virt_to_bus() returns null.

Makes sure not to call pci_free_p2pmem() if pci_alloc_p2pmem() returned NULL, which can happen if CONFIG_PCI_P2PDMA is not configured.

The current implementation is not expected to leak since pci_p2pmem_virt_to_bus() is expected to fail only if pci_alloc_p2pmem() returns null. However, checking the return value of pci_alloc_p2pmem() is more explicit.

Signed-off-by Alan Mikhak <alan.mikhak at sifive.com>
Signed-off-by Christoph Hellwig <hch at lst.de>
Signed-off-by Sasha Levin <sashal at kernel.org>
---
 drivers/nvme/host/pci.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)
drivers/nvme/host/pci.c +9 -5
index 524d6bd6d095..5dfa067f6506 100644
@@ -1456,11 +1456,15 @@ static int nvme_alloc_sq_cmds(struct nvme_dev *dev, struct nvme_queue *nvmeq,
 
 	if (qid && dev->cmb_use_sqes && (dev->cmbsz & NVME_CMBSZ_SQS)) {
 		nvmeq->sq_cmds = pci_alloc_p2pmem(pdev, SQ_SIZE(depth));
-		nvmeq->sq_dma_addr = pci_p2pmem_virt_to_bus(pdev,
-						nvmeq->sq_cmds);
-		if (nvmeq->sq_dma_addr) {
-			set_bit(NVMEQ_SQ_CMB, &nvmeq->flags);
-			return 0; 
+		if (nvmeq->sq_cmds) {
+			nvmeq->sq_dma_addr = pci_p2pmem_virt_to_bus(pdev,
+							nvmeq->sq_cmds);
+			if (nvmeq->sq_dma_addr) {
+				set_bit(NVMEQ_SQ_CMB, &nvmeq->flags);
+				return 0;
+			}
+
+			pci_free_p2pmem(pdev, nvmeq->sq_cmds, SQ_SIZE(depth));
 		}
 	}
 
Signature · 1 line
2.20.1
author maintainer
#140 lore raw

PATCH 136/171 nvme-pci: limit max_hw_sectors based on the DMA max mapping size

In reply to Sasha Levin

From: Christoph Hellwig <[email protected]>

[ Upstream commit 7637de311bd2124b298a072852448b940d8a34b9 ]

When running a NVMe device that is attached to a addressing challenged PCIe root port that requires bounce buffering, our request sizes can easily overflow the swiotlb bounce buffer size. Limit the maximum I/O size to the limit exposed by the DMA mapping subsystem.

Signed-off-by Christoph Hellwig <hch at lst.de>
Reported-by Atish Patra <Atish.Patra at wdc.com>
Tested-by Atish Patra <Atish.Patra at wdc.com>
Reviewed-by Sagi Grimberg <sagi at grimberg.me>
Signed-off-by Sasha Levin <sashal at kernel.org>
---
 drivers/nvme/host/pci.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/nvme/host/pci.c +2 -1
index 5dfa067f6506..5c45f4cab060 100644
@@ -2515,7 +2515,8 @@ static void nvme_reset_work(struct work_struct *work)
 	 * Limit the max command size to prevent iod->sg allocations going
 	 * over a single page.
 	 */
-	dev->ctrl.max_hw_sectors = NVME_MAX_KB_SZ << 1;
+	dev->ctrl.max_hw_sectors = min_t(u32,
+		NVME_MAX_KB_SZ << 1, dma_max_mapping_size(dev->dev) >> 9);
 	dev->ctrl.max_segments = NVME_MAX_SEGS;
 
 	/*
Signature · 1 line
2.20.1
author maintainer
#141 lore raw

PATCH 137/171 nvme-tcp: don't use sendpage for SLAB pages

In reply to Sasha Levin

From: Mikhail Skorzhinskii <[email protected]>

[ Upstream commit 37c15219599f7a4baa73f6e3432afc69ba7cc530 ]

According to commit a10674bf2406 ("tcp: detecting the misuse of .sendpage for Slab objects") and previous discussion, tcp_sendpage should not be used for pages that is managed by SLAB, as SLAB is not taking page reference counters into consideration.

Signed-off-by Mikhail Skorzhinskii <mskorzhinskiy at solarflare.com>
Reviewed-by Sagi Grimberg <sagi at grimberg.me>
Signed-off-by Christoph Hellwig <hch at lst.de>
Signed-off-by Sasha Levin <sashal at kernel.org>
---
 drivers/nvme/host/tcp.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/nvme/host/tcp.c +8 -1
index 08a2501b9357..606b13d35d16 100644
@@ -860,7 +860,14 @@ static int nvme_tcp_try_send_data(struct nvme_tcp_request *req)
 		else
 			flags |= MSG_MORE;
 
-		ret = kernel_sendpage(queue->sock, page, offset, len, flags);
+		/* can't zcopy slab pages */
+		if (unlikely(PageSlab(page))) {
+			ret = sock_no_sendpage(queue->sock, page, offset, len,
+					flags);
+		} else {
+			ret = kernel_sendpage(queue->sock, page, offset, len,
+					flags);
+		}
 		if (ret <= 0)
 			return ret;
 
Signature · 1 line
2.20.1
author maintainer
#143 lore raw

PATCH 139/171 nvme-tcp: set the STABLE_WRITES flag when data digests are enabled

In reply to Sasha Levin

From: Mikhail Skorzhinskii <[email protected]>

[ Upstream commit 958f2a0f8121ae36a5cbff383ab94fadf1fba5eb ]

There was a few false alarms sighted on target side about wrong data digest while performing high throughput load to XFS filesystem shared through NVMoF TCP.

This flag tells the rest of the kernel to ensure that the data buffer does not change while the write is in flight. It incurs a performance penalty, so only enable it when it is actually needed, i.e. when we are calculating data digests.

Although even with this change in place, ext2 users can steel experience false positives, as ext2 is not respecting this flag. This may be apply to vfat as well.

Signed-off-by Mikhail Skorzhinskii <mskorzhinskiy at solarflare.com>
Signed-off-by Mike Playle <mplayle at solarflare.com>
Reviewed-by Sagi Grimberg <sagi at grimberg.me>
Signed-off-by Christoph Hellwig <hch at lst.de>
Signed-off-by Sasha Levin <sashal at kernel.org>
---
 drivers/nvme/host/core.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/nvme/host/core.c +5 -0
index 120fb593d1da..b4048748551e 100644
@@ -11,6 +11,7 @@
 #include <linux/hdreg.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/backing-dev.h>
 #include <linux/list_sort.h>
 #include <linux/slab.h>
 #include <linux/types.h>
@@ -3256,6 +3257,10 @@ static int nvme_alloc_ns(struct nvme_ctrl *ctrl, unsigned nsid)
 		goto out_free_ns;
 	}
 
+	if (ctrl->opts->data_digest)
+		ns->queue->backing_dev_info->capabilities
+			|= BDI_CAP_STABLE_WRITES;
+
 	blk_queue_flag_set(QUEUE_FLAG_NONROT, ns->queue);
 	if (ctrl->ops->flags & NVME_F_PCI_P2PDMA)
 		blk_queue_flag_set(QUEUE_FLAG_PCI_P2PDMA, ns->queue);
Signature · 1 line
2.20.1
author maintainer
#151 lore raw

PATCH 147/171 dlm: check if workqueues are NULL before flushing/destroying

In reply to Sasha Levin

From: David Windsor <[email protected]>

[ Upstream commit b355516f450703c9015316e429b66a93dfff0e6f ]

If the DLM lowcomms stack is shut down before any DLM traffic can be generated, flush_workqueue() and destroy_workqueue() can be called on empty send and/or recv workqueues.

Insert guard conditionals to only call flush_workqueue() and destroy_workqueue() on workqueues that are not NULL.

---
 fs/dlm/lowcomms.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)
fs/dlm/lowcomms.c +12 -6
index 114ebfe30929..3951d39b9b75 100644
@@ -1628,8 +1628,10 @@ static void clean_writequeues(void)
 
 static void work_stop(void)
 {
-	destroy_workqueue(recv_workqueue);
-	destroy_workqueue(send_workqueue);
+	if (recv_workqueue)
+		destroy_workqueue(recv_workqueue);
+	if (send_workqueue)
+		destroy_workqueue(send_workqueue);
 }
 
 static int work_start(void)
@@ -1689,13 +1691,17 @@ static void work_flush(void)
 	struct hlist_node *n;
 	struct connection *con;
 
-	flush_workqueue(recv_workqueue);
-	flush_workqueue(send_workqueue);
+	if (recv_workqueue)
+		flush_workqueue(recv_workqueue);
+	if (send_workqueue)
+		flush_workqueue(send_workqueue);
 	do {
 		ok = 1;
 		foreach_conn(stop_conn);
-		flush_workqueue(recv_workqueue);
-		flush_workqueue(send_workqueue);
+		if (recv_workqueue)
+			flush_workqueue(recv_workqueue);
+		if (send_workqueue)
+			flush_workqueue(send_workqueue);
 		for (i = 0; i < CONN_HASH_SIZE && ok; i++) {
 			hlist_for_each_entry_safe(con, n,
 						  &connection_hash[i], list) {
Signature · 1 line
2.20.1
author maintainer
#158 lore raw

PATCH 151/171 platform/x86: Fix PCENGINES_APU2 Kconfig warning

In reply to Sasha Levin

From: YueHaibing <[email protected]>

[ Upstream commit 7d67c8ac25fbc66ee254aa3e33329d1c9bc152ce ]

Fix Kconfig warning for PCENGINES_APU2 symbol:

WARNING: unmet direct dependencies detected for GPIO_AMD_FCH
Depends on [n]: GPIOLIB [=n] && HAS_IOMEM [=y]
Selected by [y]:
- PCENGINES_APU2 [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && INPUT [=y] && INPUT_KEYBOARD [=y] && LEDS_CLASS [=y]

WARNING: unmet direct dependencies detected for KEYBOARD_GPIO_POLLED
Depends on [n]: !UML && INPUT [=y] && INPUT_KEYBOARD [=y] && GPIOLIB [=n]
Selected by [y]:
- PCENGINES_APU2 [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && INPUT [=y] && INPUT_KEYBOARD [=y] && LEDS_CLASS [=y]

Add GPIOLIB dependency to fix it.

Fixes f8eb0235f659 ("x86: pcengines apuv2 gpio/leds/keys platform driver")
---
 drivers/platform/x86/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/platform/x86/Kconfig +1 -1
index 5d5cc6111081..7c2fd1d72e18 100644
@@ -1317,7 +1317,7 @@ config HUAWEI_WMI
 
 config PCENGINES_APU2
 	tristate "PC Engines APUv2/3 front button and LEDs driver"
-	depends on INPUT && INPUT_KEYBOARD
+	depends on INPUT && INPUT_KEYBOARD && GPIOLIB
 	depends on LEDS_CLASS
 	select GPIO_AMD_FCH
 	select KEYBOARD_GPIO_POLLED
Signature · 1 line
2.20.1
author maintainer
#160 lore raw

PATCH 153/171 nvme: fix NULL deref for fabrics options

In reply to Sasha Levin

From: Minwoo Im <[email protected]>

[ Upstream commit 7d30c81b80ea9b0812d27030a46a5bf4c4e328f5 ]

git://git.infradead.org/nvme.git nvme-5.3 branch now causes the following NULL deref oops. Check the ctrl->opts first before the deref.

[   16.337581] BUG: kernel NULL pointer dereference, address: 0000000000000056
[   16.338551] #PF: supervisor read access in kernel mode
[   16.338551] #PF: error_code(0x0000) - not-present page
[   16.338551] PGD 0 P4D 0
[   16.338551] Oops: 0000 [#1] SMP PTI
[   16.338551] CPU: 2 PID: 1035 Comm: kworker/u16:5 Not tainted 5.2.0-rc6+ #1
[   16.338551] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
[   16.338551] Workqueue: nvme-wq nvme_scan_work [nvme_core]
[   16.338551] RIP: 0010:nvme_validate_ns+0xc9/0x7e0 [nvme_core]
[   16.338551] Code: c0 49 89 c5 0f 84 00 07 00 00 48 8b 7b 58 e8 be 48 39 c1 48 3d 00 f0 ff ff 49 89 45 18 0f 87 a4 06 00 00 48 8b 93 70 0a 00 00 <80> 7a 56 00 74 0c 48 8b 40 68 83 48 3c 08 49 8b 45 18 48 89 c6 bf
[   16.338551] RSP: 0018:ffffc900024c7d10 EFLAGS: 00010283
[   16.338551] RAX: ffff888135a30720 RBX: ffff88813a4fd1f8 RCX: 0000000000000007
[   16.338551] RDX: 0000000000000000 RSI: ffffffff8256dd38 RDI: ffff888135a30720
[   16.338551] RBP: 0000000000000001 R08: 0000000000000007 R09: ffff88813aa6a840
[   16.338551] R10: 0000000000000001 R11: 000000000002d060 R12: ffff88813a4fd1f8
[   16.338551] R13: ffff88813a77f800 R14: ffff88813aa35180 R15: 0000000000000001
[   16.338551] FS:  0000000000000000(0000) GS:ffff88813ba80000(0000) knlGS:0000000000000000
[   16.338551] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.338551] CR2: 0000000000000056 CR3: 000000000240a002 CR4: 0000000000360ee0
[   16.338551] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   16.338551] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   16.338551] Call Trace:
[   16.338551]  nvme_scan_work+0x2c0/0x340 [nvme_core]
[   16.338551]  ? __switch_to_asm+0x40/0x70
[   16.338551]  ? _raw_spin_unlock_irqrestore+0x18/0x30
[   16.338551]  ? try_to_wake_up+0x408/0x450
[   16.338551]  process_one_work+0x20b/0x3e0
[   16.338551]  worker_thread+0x1f9/0x3d0
[   16.338551]  ? cancel_delayed_work+0xa0/0xa0
[   16.338551]  kthread+0x117/0x120
[   16.338551]  ? kthread_stop+0xf0/0xf0
[   16.338551]  ret_from_fork+0x3a/0x50
[   16.338551] Modules linked in: nvme nvme_core
[   16.338551] CR2: 0000000000000056
[   16.338551] ---[ end trace b9bf761a93e62d84 ]---
[   16.338551] RIP: 0010:nvme_validate_ns+0xc9/0x7e0 [nvme_core]
[   16.338551] Code: c0 49 89 c5 0f 84 00 07 00 00 48 8b 7b 58 e8 be 48 39 c1 48 3d 00 f0 ff ff 49 89 45 18 0f 87 a4 06 00 00 48 8b 93 70 0a 00 00 <80> 7a 56 00 74 0c 48 8b 40 68 83 48 3c 08 49 8b 45 18 48 89 c6 bf
[   16.338551] RSP: 0018:ffffc900024c7d10 EFLAGS: 00010283
[   16.338551] RAX: ffff888135a30720 RBX: ffff88813a4fd1f8 RCX: 0000000000000007
[   16.338551] RDX: 0000000000000000 RSI: ffffffff8256dd38 RDI: ffff888135a30720
[   16.338551] RBP: 0000000000000001 R08: 0000000000000007 R09: ffff88813aa6a840
[   16.338551] R10: 0000000000000001 R11: 000000000002d060 R12: ffff88813a4fd1f8
[   16.338551] R13: ffff88813a77f800 R14: ffff88813aa35180 R15: 0000000000000001
[   16.338551] FS:  0000000000000000(0000) GS:ffff88813ba80000(0000) knlGS:0000000000000000
[   16.338551] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.338551] CR2: 0000000000000056 CR3: 000000000240a002 CR4: 0000000000360ee0
[   16.338551] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   16.338551] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Fixes 958f2a0f8121 ("nvme-tcp: set the STABLE_WRITES flag when data digests are enabled")
Cc Christoph Hellwig <hch at lst.de>
Cc Keith Busch <kbusch at kernel.org>
Reviewed-by Sagi Grimberg <sagi at grimberg.me>
Signed-off-by Minwoo Im <minwoo.im.dev at gmail.com>
Signed-off-by Jens Axboe <axboe at kernel.dk>
Signed-off-by Sasha Levin <sashal at kernel.org>
---
 drivers/nvme/host/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/nvme/host/core.c +1 -1
index b4048748551e..db5731657529 100644
@@ -3257,7 +3257,7 @@ static int nvme_alloc_ns(struct nvme_ctrl *ctrl, unsigned nsid)
 		goto out_free_ns;
 	}
 
-	if (ctrl->opts->data_digest)
+	if (ctrl->opts && ctrl->opts->data_digest)
 		ns->queue->backing_dev_info->capabilities
 			|= BDI_CAP_STABLE_WRITES;
 
Signature · 1 line
2.20.1
author maintainer
#161 lore raw

PATCH 154/171 sh: prevent warnings when using iounmap

In reply to Sasha Levin

From: Sam Ravnborg <[email protected]>

[ Upstream commit 733f0025f0fb43e382b84db0930ae502099b7e62 ]

When building drm/exynos for sh, as part of an allmodconfig build, the following warning triggered:

exynos7_drm_decon.c: In function `decon_remove':
exynos7_drm_decon.c:769:24: warning: unused variable `ctx'

    struct decon_context *ctx = dev_get_drvdata(&pdev->dev);

The ctx variable is only used as argument to iounmap().

In sh - allmodconfig CONFIG_MMU is not defined
so it ended up in:

\#define __iounmap(addr) do { } while (0)
\#define iounmap __iounmap

Fix the warning by introducing a static inline function for iounmap.

This is similar to several other architectures.

---
 arch/sh/include/asm/io.h | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
arch/sh/include/asm/io.h +5 -1
index c28e37a344ad..ac0561960c52 100644
@@ -369,7 +369,11 @@ static inline int iounmap_fixed(void __iomem *addr) { return -EINVAL; }
 
 #define ioremap_nocache	ioremap
 #define ioremap_uc	ioremap
-#define iounmap		__iounmap
+
+static inline void iounmap(void __iomem *addr)
+{
+	__iounmap(addr);
+}
 
 /*
  * Convert a physical pointer to a virtual kernel pointer for /dev/mem
Signature · 1 line
2.20.1

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/171 drm/lima: handle shared irq case for lima_pp_bcast_irq_handler

From: Peter Griffin <[email protected]>

[ Upstream commit 409c53f07a81f8db122c461f3255c6f43558c881 ]

On Hikey board all lima ip blocks are shared with one irq. This patch avoids a NULL ptr deref crash on this platform on startup. Tested with Weston and kmscube.

---
 drivers/gpu/drm/lima/lima_pp.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/gpu/drm/lima/lima_pp.c +7 -1
index d29721e177bf..8fef224b93c8 100644
@@ -64,7 +64,13 @@ static irqreturn_t lima_pp_bcast_irq_handler(int irq, void *data)
 	struct lima_ip *pp_bcast = data;
 	struct lima_device *dev = pp_bcast->dev;
 	struct lima_sched_pipe *pipe = dev->pipe + lima_pipe_pp;
-	struct drm_lima_m450_pp_frame *frame = pipe->current_task->frame;
+	struct drm_lima_m450_pp_frame *frame;
+
+	/* for shared irq case */
+	if (!pipe->current_task)
+		return IRQ_NONE;
+
+	frame = pipe->current_task->frame;
 
 	for (i = 0; i < frame->num_pp; i++) {
 		struct lima_ip *ip = pipe->processor[i];
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#2 lore raw

PATCH 3/171 iio: adc: stm32-dfsdm: manage the get_irq error case

From: Fabien Dessenne <[email protected]>

[ Upstream commit 3e53ef91f826957dec013c47707ffc1bb42b42d7 ]

During probe, check the "get_irq" error value.

---
 drivers/iio/adc/stm32-dfsdm-adc.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/iio/adc/stm32-dfsdm-adc.c +6 -0
index 19adc2b23472..588907cc3b6b 100644
@@ -1456,6 +1456,12 @@ static int stm32_dfsdm_adc_probe(struct platform_device *pdev)
 	 * So IRQ associated to filter instance 0 is dedicated to the Filter 0.
 	 */
 	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		if (irq != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get IRQ: %d\n", irq);
+		return irq;
+	}
+
 	ret = devm_request_irq(dev, irq, stm32_dfsdm_irq,
 			       0, pdev->name, adc);
 	if (ret < 0) {
Signature · 1 line
2.20.1
author maintainer
#5 lore raw

PATCH 5/171 drm/virtio: set seqno for dma-fence

In reply to Sasha Levin

From: Chia-I Wu <[email protected]>

[ Upstream commit efe2bf965522bf0796d413b47a2abbf81d471d6f ]

This is motivated by having meaningful ftrace events, but it also fixes use cases where dma_fence_is_later is called, such as in sync_file_merge.

In other drivers, fence creation and cmdbuf submission normally happen atomically,

  mutex_lock();
  fence = dma_fence_create(..., ++timeline->seqno);
  submit_cmdbuf();
  mutex_unlock();

and have no such issue. But in our driver, because most ioctls queue commands into ctrlq, we do not want to grab a lock. Instead, we set seqno to 0 when a fence is created, and update it when the command is finally queued and the seqno is known.

---
 drivers/gpu/drm/virtio/virtgpu_drv.h   |  1 -
 drivers/gpu/drm/virtio/virtgpu_fence.c | 17 ++++++++++-------
 2 files changed, 10 insertions(+), 8 deletions(-)
drivers/gpu/drm/virtio/virtgpu_drv.h +0 -1
index b69ae10ca238..d724fb3de44e 100644
@@ -102,7 +102,6 @@ struct virtio_gpu_fence {
 	struct dma_fence f;
 	struct virtio_gpu_fence_driver *drv;
 	struct list_head node;
-	uint64_t seq;
 };
 #define to_virtio_fence(x) \
 	container_of(x, struct virtio_gpu_fence, f)
drivers/gpu/drm/virtio/virtgpu_fence.c +10 -7
index 87d1966192f4..72b4f7561432 100644
@@ -40,16 +40,14 @@ bool virtio_fence_signaled(struct dma_fence *f)
 {
 	struct virtio_gpu_fence *fence = to_virtio_fence(f);
 
-	if (atomic64_read(&fence->drv->last_seq) >= fence->seq)
+	if (atomic64_read(&fence->drv->last_seq) >= fence->f.seqno)
 		return true;
 	return false;
 }
 
 static void virtio_fence_value_str(struct dma_fence *f, char *str, int size)
 {
-	struct virtio_gpu_fence *fence = to_virtio_fence(f);
-
-	snprintf(str, size, "%llu", fence->seq);
+	snprintf(str, size, "%llu", f->seqno);
 }
 
 static void virtio_timeline_value_str(struct dma_fence *f, char *str, int size)
@@ -76,6 +74,11 @@ struct virtio_gpu_fence *virtio_gpu_fence_alloc(struct virtio_gpu_device *vgdev)
 		return fence;
 
 	fence->drv = drv;
+
+	/* This only partially initializes the fence because the seqno is
+	 * unknown yet.  The fence must not be used outside of the driver
+	 * until virtio_gpu_fence_emit is called.
+	 */
 	dma_fence_init(&fence->f, &virtio_fence_ops, &drv->lock, drv->context, 0);
 
 	return fence;
@@ -89,13 +92,13 @@ int virtio_gpu_fence_emit(struct virtio_gpu_device *vgdev,
 	unsigned long irq_flags;
 
 	spin_lock_irqsave(&drv->lock, irq_flags);
-	fence->seq = ++drv->sync_seq;
+	fence->f.seqno = ++drv->sync_seq;
 	dma_fence_get(&fence->f);
 	list_add_tail(&fence->node, &drv->fences);
 	spin_unlock_irqrestore(&drv->lock, irq_flags);
 
 	cmd_hdr->flags |= cpu_to_le32(VIRTIO_GPU_FLAG_FENCE);
-	cmd_hdr->fence_id = cpu_to_le64(fence->seq);
+	cmd_hdr->fence_id = cpu_to_le64(fence->f.seqno);
 	return 0;
 }
 
@@ -109,7 +112,7 @@ void virtio_gpu_fence_event_process(struct virtio_gpu_device *vgdev,
 	spin_lock_irqsave(&drv->lock, irq_flags);
 	atomic64_set(&vgdev->fence_drv.last_seq, last_seq);
 	list_for_each_entry_safe(fence, tmp, &drv->fences, node) {
-		if (last_seq < fence->seq)
+		if (last_seq < fence->f.seqno)
 			continue;
 		dma_fence_signal_locked(&fence->f);
 		list_del(&fence->node);
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#3 lore raw

PATCH 4/171 iio: adc: stm32-dfsdm: missing error case during probe

In reply to Sasha Levin

From: Fabien Dessenne <[email protected]>

[ Upstream commit d2fc0156963cae8f1eec8e2dd645fbbf1e1c1c8e ]

During probe, check the devm_ioremap_resource() error value. Also return the devm_clk_get() error value instead of -EINVAL.

---
 drivers/iio/adc/stm32-dfsdm-core.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/iio/adc/stm32-dfsdm-core.c +6 -2
index 0a4d3746d21c..26e2011c5868 100644
@@ -233,6 +233,8 @@ static int stm32_dfsdm_parse_of(struct platform_device *pdev,
 	}
 	priv->dfsdm.phys_base = res->start;
 	priv->dfsdm.base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->dfsdm.base))
+		return PTR_ERR(priv->dfsdm.base);
 
 	/*
 	 * "dfsdm" clock is mandatory for DFSDM peripheral clocking.
@@ -242,8 +244,10 @@ static int stm32_dfsdm_parse_of(struct platform_device *pdev,
 	 */
 	priv->clk = devm_clk_get(&pdev->dev, "dfsdm");
 	if (IS_ERR(priv->clk)) {
-		dev_err(&pdev->dev, "No stm32_dfsdm_clk clock found\n");
-		return -EINVAL;
+		ret = PTR_ERR(priv->clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to get clock (%d)\n", ret);
+		return ret;
 	}
 
 	priv->aclk = devm_clk_get(&pdev->dev, "audio");
Signature · 1 line
2.20.1
author maintainer
#6 lore raw

PATCH 6/171 staging: kpc2000: added missing clean-up to probe_core_uio.

In reply to Sasha Levin

From: Jeremy Sowden <[email protected]>

[ Upstream commit abb611d2c21c0a4fa8eab35dc936c80d9a07acd8 ]

On error, probe_core_uio just returned an error without freeing resources which had previously been allocated. Added the missing clean-up code.

Updated TODO.

---
 drivers/staging/kpc2000/TODO                 | 1 -
 drivers/staging/kpc2000/kpc2000/cell_probe.c | 3 +++
 2 files changed, 3 insertions(+), 1 deletion(-)
drivers/staging/kpc2000/TODO +0 -1
index 8c7af29fefae..ed951acc829a 100644
@@ -1,7 +1,6 @@
 - the kpc_spi driver doesn't seem to let multiple transactions (to different instances of the core) happen in parallel...
 - The kpc_i2c driver is a hot mess, it should probably be cleaned up a ton.  It functions against current hardware though.
 - pcard->card_num in kp2000_pcie_probe() is a global variable and needs atomic / locking / something better.
-- probe_core_uio() probably needs error handling
 - the loop in kp2000_probe_cores() that uses probe_core_uio() also probably needs error handling
 - would be nice if the AIO fileops in kpc_dma could be made to work
     - probably want to add a CONFIG_ option to control compilation of the AIO functions
drivers/staging/kpc2000/kpc2000/cell_probe.c +3 -0
index e0dba91e7fa8..d6b57f550876 100644
@@ -295,6 +295,7 @@ int  probe_core_uio(unsigned int core_num, struct kp2000_device *pcard, char *na
     kudev->dev = device_create(kpc_uio_class, &pcard->pdev->dev, MKDEV(0,0), kudev, "%s.%d.%d.%d", kudev->uioinfo.name, pcard->card_num, cte.type, kudev->core_num);
     if (IS_ERR(kudev->dev)) {
         dev_err(&pcard->pdev->dev, "probe_core_uio device_create failed!\n");
+        kfree(kudev);
         return -ENODEV;
     }
     dev_set_drvdata(kudev->dev, kudev);
@@ -302,6 +303,8 @@ int  probe_core_uio(unsigned int core_num, struct kp2000_device *pcard, char *na
     rv = uio_register_device(kudev->dev, &kudev->uioinfo);
     if (rv){
         dev_err(&pcard->pdev->dev, "probe_core_uio failed uio_register_device: %d\n", rv);
+        put_device(kudev->dev);
+        kfree(kudev);
         return rv;
     }
     
Signature · 1 line
2.20.1
author maintainer
#10 lore raw

PATCH 9/171 drm/bochs: Fix connector leak during driver unload

In reply to Sasha Levin

From: Sam Bobroff <[email protected]>

[ Upstream commit 3c6b8625dde82600fd03ad1fcba223f1303ee535 ]

When unloading the bochs-drm driver, a warning message is printed by drm_mode_config_cleanup() because a reference is still held to one of the drm_connector structs.

Correct this by calling drm_atomic_helper_shutdown() in bochs_pci_remove().

---
 drivers/gpu/drm/bochs/bochs_drv.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/gpu/drm/bochs/bochs_drv.c +2 -0
index b86cc705138c..d8b945596b09 100644
@@ -7,6 +7,7 @@
 #include <linux/slab.h>
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_atomic_helper.h>
 
 #include "bochs.h"
 
@@ -171,6 +172,7 @@ static void bochs_pci_remove(struct pci_dev *pdev)
 {
 	struct drm_device *dev = pci_get_drvdata(pdev);
 
+	drm_atomic_helper_shutdown(dev);
 	drm_dev_unregister(dev);
 	bochs_unload(dev);
 	drm_dev_put(dev);
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#7 lore raw

PATCH 7/171 ipmi_si: fix unexpected driver unregister warning

In reply to Sasha Levin

From: Kefeng Wang <[email protected]>

[ Upstream commit 2f66353963043e1d8dfacfbdf509acc5d3be7698 ]

If ipmi_si_platform_init()->platform_driver_register() fails, platform_driver_unregister() called unconditionally will trigger following warning,

ipmi_platform: Unable to register driver: -12

------------[ cut here ]------------
Unexpected driver unregister!
WARNING: CPU: 1 PID: 7210 at drivers/base/driver.c:193 driver_unregister+0x60/0x70 drivers/base/driver.c:193

Fix it by adding platform_registered variable, only unregister platform driver when it is already successfully registered.

Message-Id: <[email protected]>

---
 drivers/char/ipmi/ipmi_si_platform.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/char/ipmi/ipmi_si_platform.c +5 -1
index f2a91c4d8cab..0cd849675d99 100644
@@ -19,6 +19,7 @@
 #include "ipmi_si.h"
 #include "ipmi_dmi.h"
 
+static bool platform_registered;
 static bool si_tryplatform = true;
 #ifdef CONFIG_ACPI
 static bool          si_tryacpi = true;
@@ -469,9 +470,12 @@ void ipmi_si_platform_init(void)
 	int rv = platform_driver_register(&ipmi_platform_driver);
 	if (rv)
 		pr_err("Unable to register driver: %d\n", rv);
+	else
+		platform_registered = true;
 }
 
 void ipmi_si_platform_shutdown(void)
 {
-	platform_driver_unregister(&ipmi_platform_driver);
+	if (platform_registered)
+		platform_driver_unregister(&ipmi_platform_driver);
 }
Signature · 1 line
2.20.1
author maintainer
#11 lore raw

PATCH 10/171 usb: core: hub: Disable hub-initiated U1/U2

In reply to Sasha Levin

From: Thinh Nguyen <[email protected]>

[ Upstream commit 561759292774707b71ee61aecc07724905bb7ef1 ]

If the device rejects the control transfer to enable device-initiated U1/U2 entry, then the device will not initiate U1/U2 transition. To improve the performance, the downstream port should not initate transition to U1/U2 to avoid the delay from the device link command response (no packet can be transmitted while waiting for a response from the device). If the device has some quirks and does not implement U1/U2, it may reject all the link state change requests, and the downstream port may resend and flood the bus with more requests. This will affect the device performance even further. This patch disables the hub-initated U1/U2 if the device-initiated U1/U2 entry fails.

Reference: USB 3.2 spec 7.2.4.2.3

---
 drivers/usb/core/hub.c | 28 ++++++++++++++++------------
 1 file changed, 16 insertions(+), 12 deletions(-)
drivers/usb/core/hub.c +16 -12
index 2f94568ba385..79a9f0302ff6 100644
@@ -3999,6 +3999,9 @@ static int usb_set_lpm_timeout(struct usb_device *udev,
  * control transfers to set the hub timeout or enable device-initiated U1/U2
  * will be successful.
  *
+ * If the control transfer to enable device-initiated U1/U2 entry fails, then
+ * hub-initiated U1/U2 will be disabled.
+ *
  * If we cannot set the parent hub U1/U2 timeout, we attempt to let the xHCI
  * driver know about it.  If that call fails, it should be harmless, and just
  * take up more slightly more bus bandwidth for unnecessary U1/U2 exit latency.
@@ -4053,23 +4056,24 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev,
 		 * host know that this link state won't be enabled.
 		 */
 		hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state);
-	} else {
-		/* Only a configured device will accept the Set Feature
-		 * U1/U2_ENABLE
-		 */
-		if (udev->actconfig)
-			usb_set_device_initiated_lpm(udev, state, true);
+		return;
+	}
 
-		/* As soon as usb_set_lpm_timeout(timeout) returns 0, the
-		 * hub-initiated LPM is enabled. Thus, LPM is enabled no
-		 * matter the result of usb_set_device_initiated_lpm().
-		 * The only difference is whether device is able to initiate
-		 * LPM.
-		 */
+	/* Only a configured device will accept the Set Feature
+	 * U1/U2_ENABLE
+	 */
+	if (udev->actconfig &&
+	    usb_set_device_initiated_lpm(udev, state, true) == 0) {
 		if (state == USB3_LPM_U1)
 			udev->usb3_lpm_u1_enabled = 1;
 		else if (state == USB3_LPM_U2)
 			udev->usb3_lpm_u2_enabled = 1;
+	} else {
+		/* Don't request U1/U2 entry if the device
+		 * cannot transition to U1/U2.
+		 */
+		usb_set_lpm_timeout(udev, state, 0);
+		hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state);
 	}
 }
 
Signature · 1 line
2.20.1
author maintainer
#15 lore raw

PATCH 14/171 consolemap: Fix a memory leaking bug in drivers/tty/vt/consolemap.c

In reply to Sasha Levin

From: Gen Zhang <[email protected]>

[ Upstream commit 84ecc2f6eb1cb12e6d44818f94fa49b50f06e6ac ]

In function con_insert_unipair(), when allocation for p2 and p1[n] fails, ENOMEM is returned, but previously allocated p1 is not freed, remains as leaking memory. Thus we should free p1 as well when this allocation fails.

---
 drivers/tty/vt/consolemap.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/tty/vt/consolemap.c +5 -1
index b28aa0d289f8..79fcc96cc7c0 100644
@@ -489,7 +489,11 @@ con_insert_unipair(struct uni_pagedir *p, u_short unicode, u_short fontpos)
 	p2 = p1[n = (unicode >> 6) & 0x1f];
 	if (!p2) {
 		p2 = p1[n] = kmalloc_array(64, sizeof(u16), GFP_KERNEL);
-		if (!p2) return -ENOMEM;
+		if (!p2) {
+			kfree(p1);
+			p->uni_pgdir[n] = NULL;
+			return -ENOMEM;
+		}
 		memset(p2, 0xff, 64*sizeof(u16)); /* No glyphs for the characters (yet) */
 	}
 
Signature · 1 line
2.20.1
author maintainer
#18 lore raw

PATCH 15/171 f2fs: fix to check layout on last valid checkpoint park

In reply to Sasha Levin

From: Chao Yu <[email protected]>

[ Upstream commit 5dae2d39074dde941cc3150dcbb7840d88179743 ]

As Ju Hyung reported:

"
I was semi-forced today to use the new kernel and test f2fs.

My Ubuntu initramfs got a bit wonky and I had to boot into live CD and fix some stuffs. The live CD was using 4.15 kernel, and just mounting the f2fs partition there corrupted f2fs and my 4.19(with 5.1-rc1-4.19 f2fs-stable merged) refused to mount with "SIT is corrupted node" message.

I used the latest f2fs-tools sent by Chao including "fsck.f2fs: fix to repair cp_loads blocks at correct position"

It spit out 140M worth of output, but at least I didn't have to run it twice. Everything returned "Ok" in the 2nd run.
The new log is at
http://arter97.com/f2fs/final

After fixing the image, I used my 4.19 kernel with 5.2-rc1-4.19 f2fs-stable merged and it mounted.

But, I got this:

[    1.047791] F2FS-fs (nvme0n1p3): layout of large_nat_bitmap is
deprecated, run fsck to repair, chksum_offset: 4092
[    1.081307] F2FS-fs (nvme0n1p3): Found nat_bits in checkpoint
[    1.161520] F2FS-fs (nvme0n1p3): recover fsync data on readonly fs
[    1.162418] F2FS-fs (nvme0n1p3): Mounted with checkpoint version = 761c7e00

But after doing a reboot, the message is gone:

[    1.098423] F2FS-fs (nvme0n1p3): Found nat_bits in checkpoint
[    1.177771] F2FS-fs (nvme0n1p3): recover fsync data on readonly fs
[    1.178365] F2FS-fs (nvme0n1p3): Mounted with checkpoint version = 761c7eda

I'm not exactly sure why the kernel detected that I'm still using the old layout on the first boot. Maybe fsck didn't fix it properly, or the check from the kernel is improper.
"

Although we have rebuild the old deprecated checkpoint with new layout during repair, we only repair last checkpoint park, the other old one is remained.

Once the image was mounted, we will 1) sanity check layout and 2) decide which checkpoint park to use according to cp_ver. So that we will print reported message unnecessarily at step 1), to avoid it, we simply move layout check into f2fs_sanity_check_ckpt() after step 2).

---
 fs/f2fs/checkpoint.c | 11 -----------
 fs/f2fs/super.c      |  9 +++++++++
 2 files changed, 9 insertions(+), 11 deletions(-)
fs/f2fs/checkpoint.c +0 -11
index ed70b68b2b38..d0539ddad6e2 100644
@@ -832,17 +832,6 @@ static int get_checkpoint_version(struct f2fs_sb_info *sbi, block_t cp_addr,
 		return -EINVAL;
 	}
 
-	if (__is_set_ckpt_flags(*cp_block, CP_LARGE_NAT_BITMAP_FLAG)) {
-		if (crc_offset != CP_MIN_CHKSUM_OFFSET) {
-			f2fs_put_page(*cp_page, 1);
-			f2fs_msg(sbi->sb, KERN_WARNING,
-				"layout of large_nat_bitmap is deprecated, "
-				"run fsck to repair, chksum_offset: %zu",
-				crc_offset);
-			return -EINVAL;
-		}
-	}
-
 	crc = f2fs_checkpoint_chksum(sbi, *cp_block);
 	if (crc != cur_cp_crc(*cp_block)) {
 		f2fs_put_page(*cp_page, 1);
fs/f2fs/super.c +9 -0
index 6b959bbb336a..856f9081c599 100644
@@ -2718,6 +2718,15 @@ int f2fs_sanity_check_ckpt(struct f2fs_sb_info *sbi)
 		return 1;
 	}
 
+	if (__is_set_ckpt_flags(ckpt, CP_LARGE_NAT_BITMAP_FLAG) &&
+		le32_to_cpu(ckpt->checksum_offset) != CP_MIN_CHKSUM_OFFSET) {
+		f2fs_msg(sbi->sb, KERN_WARNING,
+			"layout of large_nat_bitmap is deprecated, "
+			"run fsck to repair, chksum_offset: %u",
+			le32_to_cpu(ckpt->checksum_offset));
+		return 1;
+	}
+
 	if (unlikely(f2fs_cp_error(sbi))) {
 		f2fs_msg(sbi->sb, KERN_ERR, "A bug case: need to run fsck");
 		return 1;
Signature · 1 line
2.20.1
author maintainer
#20 lore raw

PATCH 17/171 ipmi_ssif: fix unexpected driver unregister warning

In reply to Sasha Levin

From: Kefeng Wang <[email protected]>

[ Upstream commit 2cd0e54489e65b8e22124a8b053aff40815487f7 ]

If platform_driver_register() fails from init_ipmi_ssif(), platform_driver_unregister() called unconditionally will trigger following warning,

ipmi_ssif: Unable to register driver: -12

------------[ cut here ]------------
Unexpected driver unregister!
WARNING: CPU: 1 PID: 6305 at drivers/base/driver.c:193 driver_unregister+0x60/0x70 drivers/base/driver.c:193

Fix it by adding platform_registered variable, only unregister platform driver when it is already successfully registered.

Message-Id: <[email protected]>

---
 drivers/char/ipmi/ipmi_ssif.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/char/ipmi/ipmi_ssif.c +4 -1
index cf8156d6bc07..305fa5054274 100644
@@ -303,6 +303,7 @@ struct ssif_info {
 	((unsigned int) atomic_read(&(ssif)->stats[SSIF_STAT_ ## stat]))
 
 static bool initialized;
+static bool platform_registered;
 
 static void return_hosed_msg(struct ssif_info *ssif_info,
 			     struct ipmi_smi_msg *msg);
@@ -2088,6 +2089,8 @@ static int init_ipmi_ssif(void)
 		rv = platform_driver_register(&ipmi_driver);
 		if (rv)
 			pr_err("Unable to register driver: %d\n", rv);
+		else
+			platform_registered = true;
 	}
 
 	ssif_i2c_driver.address_list = ssif_address_list();
@@ -2111,7 +2114,7 @@ static void cleanup_ipmi_ssif(void)
 
 	kfree(ssif_i2c_driver.address_list);
 
-	if (ssif_trydmi)
+	if (ssif_trydmi && platform_registered)
 		platform_driver_unregister(&ipmi_driver);
 
 	free_ssif_clients();
Signature · 1 line
2.20.1
author maintainer
#27 lore raw

PATCH 24/171 f2fs: fix to avoid deadloop if data_flush is on

In reply to Sasha Levin

From: Chao Yu <[email protected]>

[ Upstream commit 040d2bb318d1aea4f28cc22504b44e446666c86e ]

As Hagbard Celine reported:

[  615.697824] INFO: task kworker/u16:5:344 blocked for more than 120 seconds.
[  615.697825]       Not tainted 5.0.15-gentoo-f2fslog #4
[  615.697826] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[  615.697827] kworker/u16:5   D    0   344      2 0x80000000
[  615.697831] Workqueue: writeback wb_workfn (flush-259:0)
[  615.697832] Call Trace:
[  615.697836]  ? __schedule+0x2c5/0x8b0
[  615.697839]  schedule+0x32/0x80
[  615.697841]  schedule_preempt_disabled+0x14/0x20
[  615.697842]  __mutex_lock.isra.8+0x2ba/0x4d0
[  615.697845]  ? log_store+0xf5/0x260
[  615.697848]  f2fs_write_data_pages+0x133/0x320
[  615.697851]  ? trace_hardirqs_on+0x2c/0xe0
[  615.697854]  do_writepages+0x41/0xd0
[  615.697857]  __filemap_fdatawrite_range+0x81/0xb0
[  615.697859]  f2fs_sync_dirty_inodes+0x1dd/0x200
[  615.697861]  f2fs_balance_fs_bg+0x2a7/0x2c0
[  615.697863]  ? up_read+0x5/0x20
[  615.697865]  ? f2fs_do_write_data_page+0x2cb/0x940
[  615.697867]  f2fs_balance_fs+0xe5/0x2c0
[  615.697869]  __write_data_page+0x1c8/0x6e0
[  615.697873]  f2fs_write_cache_pages+0x1e0/0x450
[  615.697878]  f2fs_write_data_pages+0x14b/0x320
[  615.697880]  ? trace_hardirqs_on+0x2c/0xe0
[  615.697883]  do_writepages+0x41/0xd0
[  615.697885]  __filemap_fdatawrite_range+0x81/0xb0
[  615.697887]  f2fs_sync_dirty_inodes+0x1dd/0x200
[  615.697889]  f2fs_balance_fs_bg+0x2a7/0x2c0
[  615.697891]  f2fs_write_node_pages+0x51/0x220
[  615.697894]  do_writepages+0x41/0xd0
[  615.697897]  __writeback_single_inode+0x3d/0x3d0
[  615.697899]  writeback_sb_inodes+0x1e8/0x410
[  615.697902]  __writeback_inodes_wb+0x5d/0xb0
[  615.697904]  wb_writeback+0x28f/0x340
[  615.697906]  ? cpumask_next+0x16/0x20
[  615.697908]  wb_workfn+0x33e/0x420
[  615.697911]  process_one_work+0x1a1/0x3d0
[  615.697913]  worker_thread+0x30/0x380
[  615.697915]  ? process_one_work+0x3d0/0x3d0
[  615.697916]  kthread+0x116/0x130
[  615.697918]  ? kthread_create_worker_on_cpu+0x70/0x70
[  615.697921]  ret_from_fork+0x3a/0x50

There is still deadloop in below condition:

d A
- do_writepages
- f2fs_write_node_pages
- f2fs_balance_fs_bg
- f2fs_sync_dirty_inodes
- f2fs_write_cache_pages
- mutex_lock(&sbi->writepages) -- lock once
- __write_data_page
- f2fs_balance_fs_bg
- f2fs_sync_dirty_inodes
- f2fs_write_data_pages
- mutex_lock(&sbi->writepages) -- lock again

Thread A Thread B
- do_writepages
- f2fs_write_node_pages
- f2fs_balance_fs_bg
- f2fs_sync_dirty_inodes
- .cp_task = current
- f2fs_sync_dirty_inodes
- .cp_task = current
- filemap_fdatawrite
- .cp_task = NULL
- filemap_fdatawrite
- f2fs_write_cache_pages
- enter f2fs_balance_fs_bg since .cp_task is NULL
- .cp_task = NULL

Change as below to avoid this:
- add condition to avoid holding .writepages mutex lock in path of data flush
- introduce mutex lock sbi.flush_lock to exclude concurrent data flush in background.

---
 fs/f2fs/data.c    | 3 +++
 fs/f2fs/f2fs.h    | 1 +
 fs/f2fs/segment.c | 4 ++++
 fs/f2fs/super.c   | 1 +
 4 files changed, 9 insertions(+)
fs/f2fs/data.c +3 -0
index eda4181d2092..923923603a7d 100644
@@ -2262,6 +2262,9 @@ static inline bool __should_serialize_io(struct inode *inode,
 		return false;
 	if (IS_NOQUOTA(inode))
 		return false;
+	/* to avoid deadlock in path of data flush */
+	if (F2FS_I(inode)->cp_task)
+		return false;
 	if (wbc->sync_mode != WB_SYNC_ALL)
 		return true;
 	if (get_dirty_pages(inode) >= SM_I(F2FS_I_SB(inode))->min_seq_blocks)
fs/f2fs/f2fs.h +1 -0
index 06b89a9862ab..d1b64cb77326 100644
@@ -1207,6 +1207,7 @@ struct f2fs_sb_info {
 	/* for inode management */
 	struct list_head inode_list[NR_INODE_TYPE];	/* dirty inode list */
 	spinlock_t inode_lock[NR_INODE_TYPE];	/* for dirty inode list lock */
+	struct mutex flush_lock;		/* for flush exclusion */
 
 	/* for extent tree cache */
 	struct radix_tree_root extent_tree_root;/* cache extent cache entries */
fs/f2fs/segment.c +4 -0
index 8dee063c833f..a96b9e964733 100644
@@ -546,9 +546,13 @@ void f2fs_balance_fs_bg(struct f2fs_sb_info *sbi)
 		if (test_opt(sbi, DATA_FLUSH)) {
 			struct blk_plug plug;
 
+			mutex_lock(&sbi->flush_lock);
+
 			blk_start_plug(&plug);
 			f2fs_sync_dirty_inodes(sbi, FILE_INODE);
 			blk_finish_plug(&plug);
+
+			mutex_unlock(&sbi->flush_lock);
 		}
 		f2fs_sync_fs(sbi->sb, true);
 		stat_inc_bg_cp_count(sbi->stat_info);
fs/f2fs/super.c +1 -0
index 856f9081c599..4b47ac994daf 100644
@@ -3296,6 +3296,7 @@ static int f2fs_fill_super(struct super_block *sb, void *data, int silent)
 		INIT_LIST_HEAD(&sbi->inode_list[i]);
 		spin_lock_init(&sbi->inode_lock[i]);
 	}
+	mutex_init(&sbi->flush_lock);
 
 	f2fs_init_extent_cache_info(sbi);
 
Signature · 1 line
2.20.1
author maintainer
#32 lore raw

PATCH 29/171 drm/edid: Fix a missing-check bug in drm_load_edid_firmware()

In reply to Sasha Levin

From: Gen Zhang <[email protected]>

[ Upstream commit 9f1f1a2dab38d4ce87a13565cf4dc1b73bef3a5f ]

In drm_load_edid_firmware(), fwstr is allocated by kstrdup(). And fwstr is dereferenced in the following codes. However, memory allocation functions such as kstrdup() may fail and returns NULL. Dereferencing this null pointer may cause the kernel go wrong. Thus we should check this kstrdup() operation.
Further, if kstrdup() returns NULL, we should return ERR_PTR(-ENOMEM) to the caller site.

---
 drivers/gpu/drm/drm_edid_load.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/gpu/drm/drm_edid_load.c +2 -0
index 1e5593575d23..6192b7b20d84 100644
@@ -278,6 +278,8 @@ struct edid *drm_load_edid_firmware(struct drm_connector *connector)
 	 * the last one found one as a fallback.
 	 */
 	fwstr = kstrdup(edid_firmware, GFP_KERNEL);
+	if (!fwstr)
+		return ERR_PTR(-ENOMEM);
 	edidstr = fwstr;
 
 	while ((edidname = strsep(&edidstr, ","))) {
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#33 lore raw

PATCH 30/171 tools: PCI: Fix broken pcitest compilation

In reply to Sasha Levin

From: Alan Mikhak <[email protected]>

[ Upstream commit 8a5e0af240e07dd3d4897eb8ff52aab757da7fab ]

pcitest is currently broken due to the following compiler error and related warning. Fix by changing the run_test() function signature to return an integer result.

pcitest.c: In function run_test:
pcitest.c:143:9: warning: return with a value, in function returning void
return (ret < 0) ? ret : 1 - ret; /* return 0 if test succeeded */

pcitest.c: In function main:
pcitest.c:232:9: error: void value not ignored as it ought to be
return run_test(test);

Fixes fef31ecaaf2c ("tools: PCI: Fix compilation warnings")
---
 tools/pci/pcitest.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
tools/pci/pcitest.c +3 -3
index cb7a47dfd8b6..49ddfa6f5a8c 100644
@@ -36,15 +36,15 @@ struct pci_test {
 	unsigned long	size;
 };
 
-static void run_test(struct pci_test *test)
+static int run_test(struct pci_test *test)
 {
-	long ret;
+	int ret = -EINVAL;
 	int fd;
 
 	fd = open(test->device, O_RDWR);
 	if (fd < 0) {
 		perror("can't open PCI Endpoint Test device");
-		return;
+		return -ENODEV;
 	}
 
 	if (test->barnum >= 0 && test->barnum <= 5) {
Signature · 1 line
2.20.1
author maintainer
#36 lore raw

PATCH 33/171 drm/bridge: tc358767: read display_props in get_modes()

In reply to Sasha Levin

From: Tomi Valkeinen <[email protected]>

[ Upstream commit 3231573065ad4f4ecc5c9147b24f29f846dc0c2f ]

We need to know the link bandwidth to filter out modes we cannot support, so we need to have read the display props before doing the filtering.

To ensure we have up to date display props, call tc_get_display_props() in the beginning of tc_connector_get_modes().

---
 drivers/gpu/drm/bridge/tc358767.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/gpu/drm/bridge/tc358767.c +7 -0
index 4655bb1eb88f..f59a51e19dab 100644
@@ -1141,6 +1141,13 @@ static int tc_connector_get_modes(struct drm_connector *connector)
 	struct tc_data *tc = connector_to_tc(connector);
 	struct edid *edid;
 	unsigned int count;
+	int ret;
+
+	ret = tc_get_display_props(tc);
+	if (ret < 0) {
+		dev_err(tc->dev, "failed to read display props: %d\n", ret);
+		return 0;
+	}
 
 	if (tc->panel && tc->panel->funcs && tc->panel->funcs->get_modes) {
 		count = tc->panel->funcs->get_modes(tc->panel);
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#37 lore raw

PATCH 34/171 drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz

In reply to Sasha Levin

From: Jyri Sarha <[email protected]>

[ Upstream commit 8dbfc5b65023b67397aca28e8adb25c819f6398c ]

The pixel clock unit in the first two registers (0x00 and 0x01) of sii9022 is 10kHz, not 1kHz as in struct drm_display_mode. Division by 10 fixes the issue.

---
 drivers/gpu/drm/bridge/sii902x.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/gpu/drm/bridge/sii902x.c +3 -2
index 1211b5379df1..8e3c5e599eba 100644
@@ -229,10 +229,11 @@ static void sii902x_bridge_mode_set(struct drm_bridge *bridge,
 	struct regmap *regmap = sii902x->regmap;
 	u8 buf[HDMI_INFOFRAME_SIZE(AVI)];
 	struct hdmi_avi_infoframe frame;
+	u16 pixel_clock_10kHz = adj->clock / 10;
 	int ret;
 
-	buf[0] = adj->clock;
-	buf[1] = adj->clock >> 8;
+	buf[0] = pixel_clock_10kHz & 0xff;
+	buf[1] = pixel_clock_10kHz >> 8;
 	buf[2] = adj->vrefresh;
 	buf[3] = 0x00;
 	buf[4] = adj->hdisplay;
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#34 lore raw

PATCH 31/171 PCI: Return error if cannot probe VF

In reply to Sasha Levin

From: Alex Williamson <[email protected]>

[ Upstream commit 76002d8b48c4b08c9bd414517dd295e132ad910b ]

Commit 0e7df22401a3 ("PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding") allows the user to specify that drivers for VFs of a PF should not be probed, but it actually causes pci_device_probe() to return success back to the driver core in this case. Therefore by all sysfs appearances the device is bound to a driver, the driver link from the device exists as does the device link back from the driver, yet the driver's probe function is never called on the device. We also fail to do any sort of cleanup when we're prohibited from probing the device, the IRQ setup remains in place and we even hold a device reference.

Instead, abort with errno before any setup or references are taken when pci_device_can_probe() prevents us from trying to probe the device.

Fixes 0e7df22401a3 ("PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding")
---
 drivers/pci/pci-driver.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/pci/pci-driver.c +7 -6
index ca3793002e2f..74c3df250d9c 100644
@@ -414,6 +414,9 @@ static int pci_device_probe(struct device *dev)
 	struct pci_dev *pci_dev = to_pci_dev(dev);
 	struct pci_driver *drv = to_pci_driver(dev->driver);
 
+	if (!pci_device_can_probe(pci_dev))
+		return -ENODEV;
+
 	pci_assign_irq(pci_dev);
 
 	error = pcibios_alloc_irq(pci_dev);
@@ -421,12 +424,10 @@ static int pci_device_probe(struct device *dev)
 		return error;
 
 	pci_dev_get(pci_dev);
-	if (pci_device_can_probe(pci_dev)) {
-		error = __pci_device_probe(drv, pci_dev);
-		if (error) {
-			pcibios_free_irq(pci_dev);
-			pci_dev_put(pci_dev);
-		}
+	error = __pci_device_probe(drv, pci_dev);
+	if (error) {
+		pcibios_free_irq(pci_dev);
+		pci_dev_put(pci_dev);
 	}
 
 	return error;
Signature · 1 line
2.20.1
author maintainer
#35 lore raw

PATCH 32/171 staging: kpc2000: report error status to spi core

In reply to Sasha Levin

From: Mao Wenan <[email protected]>

[ Upstream commit 9164f336311863d3e9f80840f4a1cce2aee293bd ]

There is an error condition that's not reported to the spi core in kp_spi_transfer_one_message(). It should restore status value to m->status, and return it in error path.

---
 drivers/staging/kpc2000/kpc_spi/spi_driver.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/staging/kpc2000/kpc_spi/spi_driver.c +6 -2
index 86df16547a92..2f535022dc03 100644
@@ -333,7 +333,7 @@ kp_spi_transfer_one_message(struct spi_master *master, struct spi_message *m)
     list_for_each_entry(transfer, &m->transfers, transfer_list) {
         if (transfer->tx_buf == NULL && transfer->rx_buf == NULL && transfer->len) {
             status = -EINVAL;
-            break;
+            goto error;
         }
         
         /* transfer */
@@ -371,7 +371,7 @@ kp_spi_transfer_one_message(struct spi_master *master, struct spi_message *m)
             
             if (count != transfer->len) {
                 status = -EIO;
-                break;
+                goto error;
             }
         }
         
@@ -389,6 +389,10 @@ kp_spi_transfer_one_message(struct spi_master *master, struct spi_message *m)
     /* done work */
     spi_finalize_current_message(master);
     return 0;
+
+ error:
+    m->status = status;
+    return status;
 }
 
 static void
Signature · 1 line
2.20.1
author maintainer
#42 lore raw

PATCH 39/171 f2fs: Lower threshold for disable_cp_again

In reply to Sasha Levin

From: Daniel Rosenberg <[email protected]>

[ Upstream commit ae4ad7ea09d32ff1b6fb908ff12f8c1bd5241b29 ]

The existing threshold for allowable holes at checkpoint=disable time is too high. The OVP space contains reserved segments, which are always in the form of free segments. These must be subtracted from the OVP value.

The current threshold is meant to be the maximum value of holes of a single type we can have and still guarantee that we can fill the disk without failing to find space for a block of a given type.

If the disk is full, ignoring current reserved, which only helps us, the amount of unused blocks is equal to the OVP area. Of that, there are reserved segments, which must be free segments, and the rest of the ovp area, which can come from either free segments or holes. The maximum possible amount of holes is OVP-reserved.

Now, consider the disk when mounting with checkpoint=disable. We must be able to fill all available free space with either data or node blocks. When we start with checkpoint=disable, holes are locked to their current type. Say we have H of one type of hole, and H+X of the other. We can fill H of that space with arbitrary typed blocks via SSR. For the remaining H+X blocks, we may not have any of a given block type left at all. For instance, if we were to fill the disk entirely with blocks of the type with fewer holes, the H+X blocks of the opposite type would not be used. If H+X > OVP-reserved, there would be more holes than could possibly exist, and we would have failed to find a suitable block earlier on, leading to a crash in update_sit_entry.

If H+X <= OVP-reserved, then the holes end up effectively masked by the OVP region in this case.

---
 fs/f2fs/segment.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
fs/f2fs/segment.c +5 -3
index a96b9e964733..8903b61457e7 100644
@@ -876,7 +876,9 @@ void f2fs_dirty_to_prefree(struct f2fs_sb_info *sbi)
 int f2fs_disable_cp_again(struct f2fs_sb_info *sbi)
 {
 	struct dirty_seglist_info *dirty_i = DIRTY_I(sbi);
-	block_t ovp = overprovision_segments(sbi) << sbi->log_blocks_per_seg;
+	int ovp_hole_segs =
+		(overprovision_segments(sbi) - reserved_segments(sbi));
+	block_t ovp_holes = ovp_hole_segs << sbi->log_blocks_per_seg;
 	block_t holes[2] = {0, 0};	/* DATA and NODE */
 	struct seg_entry *se;
 	unsigned int segno;
@@ -891,10 +893,10 @@ int f2fs_disable_cp_again(struct f2fs_sb_info *sbi)
 	}
 	mutex_unlock(&dirty_i->seglist_lock);
 
-	if (holes[DATA] > ovp || holes[NODE] > ovp)
+	if (holes[DATA] > ovp_holes || holes[NODE] > ovp_holes)
 		return -EAGAIN;
 	if (is_sbi_flag_set(sbi, SBI_CP_DISABLED_QUICK) &&
-		dirty_segments(sbi) > overprovision_segments(sbi))
+		dirty_segments(sbi) > ovp_hole_segs)
 		return -EAGAIN;
 	return 0;
 }
Signature · 1 line
2.20.1
author maintainer
#46 lore raw

PATCH 43/171 drm/vkms: Forward timer right after drm_crtc_handle_vblank

In reply to Sasha Levin

From: Daniel Vetter <[email protected]>

[ Upstream commit 7355965da22b8d9ebac8bce4b776399fb0bb9d32 ]

In

commit def35e7c592616bc09be328de8795e5e624a3cf8

Author: Shayenne Moura <[email protected]>
Date:   Wed Jan 30 14:06:36 2019 -0200

drm/vkms: Bugfix extra vblank frame

we fixed the vblank counter to give accurate results outside of drm_crtc_handle_vblank, which fixed bugs around vblank timestamps being off-by-one and causing the vblank counter to jump when it shouldn't.

The trouble is that this completely broke crc generation. Shayenne and Rodrigo tracked this down to the vblank timestamp going backwards in time somehow. Which then resulted in an underflow in drm_vblank.c code, which resulted in all kinds of things breaking really badly.

The reason for this is that once we've called drm_crtc_handle_vblank and the hrtimer isn't forwarded yet, we're returning a vblank timestamp in the past. This race is really hard to hit since it's small, except when you enable crc generation: In that case there's a call to drm_crtc_accurate_vblank right in-betwen, so we're guaranteed to hit the bug.

The fix is to roll the hrtimer forward _before_ we do the vblank processing (which has a side-effect of incrementing the vblank counter), and we always subtract one frame from the hrtimer - since now it's always one frame in the future.

To make sure we don't hit this again also add a WARN_ON checking for whether our timestamp is somehow moving into the past, which is never should.

This also aligns more with how real hw works:
1. first all registers are updated with the new timestamp/vblank counter values.
2. then an interrupt is generated
3. kernel interrupt handler eventually fires.

So doing this aligns vkms closer with what drm_vblank.c expects. Document this also in a comment.

---
 drivers/gpu/drm/vkms/vkms_crtc.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)
drivers/gpu/drm/vkms/vkms_crtc.c +16 -6
index bb66dbcd5e3f..e447b7588d06 100644
@@ -15,6 +15,10 @@ static enum hrtimer_restart vkms_vblank_simulate(struct hrtimer *timer)
 
 	spin_lock(&output->lock);
 
+	ret_overrun = hrtimer_forward_now(&output->vblank_hrtimer,
+					  output->period_ns);
+	WARN_ON(ret_overrun != 1);
+
 	ret = drm_crtc_handle_vblank(crtc);
 	if (!ret)
 		DRM_ERROR("vkms failure on handling vblank");
@@ -35,10 +39,6 @@ static enum hrtimer_restart vkms_vblank_simulate(struct hrtimer *timer)
 			DRM_WARN("failed to queue vkms_crc_work_handle");
 	}
 
-	ret_overrun = hrtimer_forward_now(&output->vblank_hrtimer,
-					  output->period_ns);
-	WARN_ON(ret_overrun != 1);
-
 	spin_unlock(&output->lock);
 
 	return HRTIMER_RESTART;
@@ -74,11 +74,21 @@ bool vkms_get_vblank_timestamp(struct drm_device *dev, unsigned int pipe,
 {
 	struct vkms_device *vkmsdev = drm_device_to_vkms_device(dev);
 	struct vkms_output *output = &vkmsdev->output;
+	struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
 
 	*vblank_time = output->vblank_hrtimer.node.expires;
 
-	if (!in_vblank_irq)
-		*vblank_time -= output->period_ns;
+	if (WARN_ON(*vblank_time == vblank->time))
+		return true;
+
+	/*
+	 * To prevent races we roll the hrtimer forward before we do any
+	 * interrupt processing - this is how real hw works (the interrupt is
+	 * only generated after all the vblank registers are updated) and what
+	 * the vblank core expects. Therefore we need to always correct the
+	 * timestampe by one frame.
+	 */
+	*vblank_time -= output->period_ns;
 
 	return true;
 }
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#41 lore raw

PATCH 38/171 f2fs: Fix accounting for unusable blocks

In reply to Sasha Levin

From: Daniel Rosenberg <[email protected]>

[ Upstream commit a4c3ecaaadac5693f555cfef1c9eecf4c39df818 ]

Fixes possible underflows when dealing with unusable blocks.

---
 fs/f2fs/f2fs.h | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)
fs/f2fs/f2fs.h +10 -5
index d1b64cb77326..9e6721e15b24 100644
@@ -1767,8 +1767,12 @@ static inline int inc_valid_block_count(struct f2fs_sb_info *sbi,
 
 	if (!__allow_reserved_blocks(sbi, inode, true))
 		avail_user_block_count -= F2FS_OPTION(sbi).root_reserved_blocks;
-	if (unlikely(is_sbi_flag_set(sbi, SBI_CP_DISABLED)))
-		avail_user_block_count -= sbi->unusable_block_count;
+	if (unlikely(is_sbi_flag_set(sbi, SBI_CP_DISABLED))) {
+		if (avail_user_block_count > sbi->unusable_block_count)
+			avail_user_block_count -= sbi->unusable_block_count;
+		else
+			avail_user_block_count = 0;
+	}
 	if (unlikely(sbi->total_valid_block_count > avail_user_block_count)) {
 		diff = sbi->total_valid_block_count - avail_user_block_count;
 		if (diff > *count)
@@ -1968,7 +1972,7 @@ static inline int inc_valid_node_count(struct f2fs_sb_info *sbi,
 					struct inode *inode, bool is_inode)
 {
 	block_t	valid_block_count;
-	unsigned int valid_node_count;
+	unsigned int valid_node_count, user_block_count;
 	int err;
 
 	if (is_inode) {
@@ -1995,10 +1999,11 @@ static inline int inc_valid_node_count(struct f2fs_sb_info *sbi,
 
 	if (!__allow_reserved_blocks(sbi, inode, false))
 		valid_block_count += F2FS_OPTION(sbi).root_reserved_blocks;
+	user_block_count = sbi->user_block_count;
 	if (unlikely(is_sbi_flag_set(sbi, SBI_CP_DISABLED)))
-		valid_block_count += sbi->unusable_block_count;
+		user_block_count -= sbi->unusable_block_count;
 
-	if (unlikely(valid_block_count > sbi->user_block_count)) {
+	if (unlikely(valid_block_count > user_block_count)) {
 		spin_unlock(&sbi->stat_lock);
 		goto enospc;
 	}
Signature · 8 lines
2.20.1



_______________________________________________
Linux-f2fs-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
author maintainer
#49 lore raw

PATCH 46/171 drm/omap: don't check dispc timings for DSI

In reply to Sasha Levin

From: Sebastian Reichel <[email protected]>

[ Upstream commit ad9df7d91b4a6e8f4b20c2bf539ac09b3b2ad6eb ]

While most display types only forward their VM to the DISPC, this is not true for DSI. DSI calculates the VM for DISPC based on its own, but it's not identical. Actually the DSI VM is not even a valid DISPC VM making this check fail. Let's restore the old behaviour and avoid checking the DISPC VM for DSI here.

Fixes 7c27fa57ef31 ("drm/omap: Call dispc timings check operation directly")
---
 drivers/gpu/drm/omapdrm/omap_crtc.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)
drivers/gpu/drm/omapdrm/omap_crtc.c +14 -4
index 8712af79a49c..4c43dd282acc 100644
@@ -384,10 +384,20 @@ static enum drm_mode_status omap_crtc_mode_valid(struct drm_crtc *crtc,
 	int r;
 
 	drm_display_mode_to_videomode(mode, &vm);
-	r = priv->dispc_ops->mgr_check_timings(priv->dispc, omap_crtc->channel,
-					       &vm);
-	if (r)
-		return r;
+
+	/*
+	 * DSI might not call this, since the supplied mode is not a
+	 * valid DISPC mode. DSI will calculate and configure the
+	 * proper DISPC mode later.
+	 */
+	if (omap_crtc->pipe->output->next == NULL ||
+	    omap_crtc->pipe->output->next->type != OMAP_DISPLAY_TYPE_DSI) {
+		r = priv->dispc_ops->mgr_check_timings(priv->dispc,
+						       omap_crtc->channel,
+						       &vm);
+		if (r)
+			return r;
+	}
 
 	/* Check for bandwidth limit */
 	if (priv->max_bandwidth) {
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#48 lore raw

PATCH 45/171 mm/hmm: fix use after free with struct hmm in the mmu notifiers

In reply to Sasha Levin

From: Jason Gunthorpe <[email protected]>

[ Upstream commit 6d7c3cde93c1d9ac0b37f78ec3f2ff052159a242 ]

mmu_notifier_unregister_no_release() is not a fence and the mmu_notifier system will continue to reference hmm->mn until the srcu grace period expires.

Resulting in use after free races like this:

         CPU0                                     CPU1
                                               __mmu_notifier_invalidate_range_start()
                                                 srcu_read_lock
                                                 hlist_for_each ()
                                                   // mn == hmm->mn
hmm_mirror_unregister()
  hmm_put()
    hmm_free()
      mmu_notifier_unregister_no_release()
         hlist_del_init_rcu(hmm-mn->list)
			                           mn->ops->invalidate_range_start(mn, range);
					             mm_get_hmm()
      mm->hmm = NULL;
      kfree(hmm)
                                                     mutex_lock(&hmm->lock);

Use SRCU to kfree the hmm memory so that the notifiers can rely on hmm existing. Get the now-safe hmm struct through container_of and directly check kref_get_unless_zero to lock it against free.

---
 include/linux/hmm.h |  1 +
 mm/hmm.c            | 23 +++++++++++++++++------
 2 files changed, 18 insertions(+), 6 deletions(-)
include/linux/hmm.h +1 -0
index 044a36d7c3f8..89508dc0795f 100644
@@ -93,6 +93,7 @@ struct hmm {
 	struct mmu_notifier	mmu_notifier;
 	struct rw_semaphore	mirrors_sem;
 	wait_queue_head_t	wq;
+	struct rcu_head		rcu;
 	long			notifiers;
 	bool			dead;
 };
mm/hmm.c +17 -6
index f702a3895d05..4c405dfbd2b3 100644
@@ -104,6 +104,11 @@ static struct hmm *hmm_get_or_create(struct mm_struct *mm)
 	return NULL;
 }
 
+static void hmm_free_rcu(struct rcu_head *rcu)
+{
+	kfree(container_of(rcu, struct hmm, rcu));
+}
+
 static void hmm_free(struct kref *kref)
 {
 	struct hmm *hmm = container_of(kref, struct hmm, kref);
@@ -116,7 +121,7 @@ static void hmm_free(struct kref *kref)
 		mm->hmm = NULL;
 	spin_unlock(&mm->page_table_lock);
 
-	kfree(hmm);
+	mmu_notifier_call_srcu(&hmm->rcu, hmm_free_rcu);
 }
 
 static inline void hmm_put(struct hmm *hmm)
@@ -144,10 +149,14 @@ void hmm_mm_destroy(struct mm_struct *mm)
 
 static void hmm_release(struct mmu_notifier *mn, struct mm_struct *mm)
 {
-	struct hmm *hmm = mm_get_hmm(mm);
+	struct hmm *hmm = container_of(mn, struct hmm, mmu_notifier);
 	struct hmm_mirror *mirror;
 	struct hmm_range *range;
 
+	/* Bail out if hmm is in the process of being freed */
+	if (!kref_get_unless_zero(&hmm->kref))
+		return;
+
 	/* Report this HMM as dying. */
 	hmm->dead = true;
 
@@ -185,13 +194,14 @@ static void hmm_release(struct mmu_notifier *mn, struct mm_struct *mm)
 static int hmm_invalidate_range_start(struct mmu_notifier *mn,
 			const struct mmu_notifier_range *nrange)
 {
-	struct hmm *hmm = mm_get_hmm(nrange->mm);
+	struct hmm *hmm = container_of(mn, struct hmm, mmu_notifier);
 	struct hmm_mirror *mirror;
 	struct hmm_update update;
 	struct hmm_range *range;
 	int ret = 0;
 
-	VM_BUG_ON(!hmm);
+	if (!kref_get_unless_zero(&hmm->kref))
+		return 0;
 
 	update.start = nrange->start;
 	update.end = nrange->end;
@@ -239,9 +249,10 @@ static int hmm_invalidate_range_start(struct mmu_notifier *mn,
 static void hmm_invalidate_range_end(struct mmu_notifier *mn,
 			const struct mmu_notifier_range *nrange)
 {
-	struct hmm *hmm = mm_get_hmm(nrange->mm);
+	struct hmm *hmm = container_of(mn, struct hmm, mmu_notifier);
 
-	VM_BUG_ON(!hmm);
+	if (!kref_get_unless_zero(&hmm->kref))
+		return;
 
 	mutex_lock(&hmm->lock);
 	hmm->notifiers--;
Signature · 1 line
2.20.1
author maintainer
#54 lore raw

PATCH 51/171 PCI: endpoint: Allocate enough space for fixed size BAR

In reply to Sasha Levin

From: Alan Mikhak <[email protected]>

[ Upstream commit f16fb16ed16c7f561e9c41c9ae4107c7f6aa553c ]

PCI endpoint test function code should honor the .bar_fixed_size parameter from underlying endpoint controller drivers or results may be unexpected.

In pci_epf_test_alloc_space(), check if BAR being used for test register space is a fixed size BAR. If so, allocate the required fixed size.

---
 drivers/pci/endpoint/functions/pci-epf-test.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/pci/endpoint/functions/pci-epf-test.c +7 -1
index 27806987e93b..7d41e6684b87 100644
@@ -434,10 +434,16 @@ static int pci_epf_test_alloc_space(struct pci_epf *epf)
 	int bar;
 	enum pci_barno test_reg_bar = epf_test->test_reg_bar;
 	const struct pci_epc_features *epc_features;
+	size_t test_reg_size;
 
 	epc_features = epf_test->epc_features;
 
-	base = pci_epf_alloc_space(epf, sizeof(struct pci_epf_test_reg),
+	if (epc_features->bar_fixed_size[test_reg_bar])
+		test_reg_size = bar_size[test_reg_bar];
+	else
+		test_reg_size = sizeof(struct pci_epf_test_reg);
+
+	base = pci_epf_alloc_space(epf, test_reg_size,
 				   test_reg_bar, epc_features->align);
 	if (!base) {
 		dev_err(dev, "Failed to allocated register space\n");
Signature · 7 lines
2.20.1


_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
author maintainer
#58 lore raw

PATCH 54/171 drm/virtio: Add memory barriers for capset cache.

In reply to Sasha Levin

From: David Riley <[email protected]>

[ Upstream commit 9ff3a5c88e1f1ab17a31402b96d45abe14aab9d7 ]

After data is copied to the cache entry, atomic_set is used indicate that the data is the entry is valid without appropriate memory barriers. Similarly the read side was missing the corresponding memory barriers.

---
 drivers/gpu/drm/virtio/virtgpu_ioctl.c | 3 +++
 drivers/gpu/drm/virtio/virtgpu_vq.c    | 2 ++
 2 files changed, 5 insertions(+)
drivers/gpu/drm/virtio/virtgpu_ioctl.c +3 -0
index 949a264985fc..19fbffd0f7a3 100644
@@ -542,6 +542,9 @@ static int virtio_gpu_get_caps_ioctl(struct drm_device *dev,
 	if (!ret)
 		return -EBUSY;
 
+	/* is_valid check must proceed before copy of the cache entry. */
+	smp_rmb();
+
 	ptr = cache_ent->caps_cache;
 
 copy_exit:
drivers/gpu/drm/virtio/virtgpu_vq.c +2 -0
index 5bb0f0a084e9..a7684f9c80db 100644
@@ -583,6 +583,8 @@ static void virtio_gpu_cmd_capset_cb(struct virtio_gpu_device *vgdev,
 		    cache_ent->id == le32_to_cpu(cmd->capset_id)) {
 			memcpy(cache_ent->caps_cache, resp->capset_data,
 			       cache_ent->size);
+			/* Copy must occur before is_valid is signalled. */
+			smp_wmb();
 			atomic_set(&cache_ent->is_valid, 1);
 			break;
 		}
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#60 lore raw

PATCH 56/171 phy: renesas: rcar-gen2: Fix memory leak at error paths

In reply to Sasha Levin

From: Yoshihiro Shimoda <[email protected]>

[ Upstream commit d4a36e82924d3305a17ac987a510f3902df5a4b2 ]

This patch fixes memory leak at error paths of the probe function. In for_each_child_of_node, if the loop returns, the driver should call of_put_node() before returns.

Fixes 1233f59f745b237 ("phy: Renesas R-Car Gen2 PHY driver")
---
 drivers/phy/renesas/phy-rcar-gen2.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/phy/renesas/phy-rcar-gen2.c +2 -0
index 8dc5710d9c98..2926e4937301 100644
@@ -391,6 +391,7 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev)
 		error = of_property_read_u32(np, "reg", &channel_num);
 		if (error || channel_num > 2) {
 			dev_err(dev, "Invalid \"reg\" property\n");
+			of_node_put(np);
 			return error;
 		}
 		channel->select_mask = select_mask[channel_num];
@@ -406,6 +407,7 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev)
 						   data->gen2_phy_ops);
 			if (IS_ERR(phy->phy)) {
 				dev_err(dev, "Failed to create PHY\n");
+				of_node_put(np);
 				return PTR_ERR(phy->phy);
 			}
 			phy_set_drvdata(phy->phy, phy);
Signature · 1 line
2.20.1
author maintainer
#63 lore raw

PATCH 59/171 drm/bridge: tfp410: fix use of cancel_delayed_work_sync

In reply to Sasha Levin

From: Tomi Valkeinen <[email protected]>

[ Upstream commit b1622cb3be4557fd086831ca7426eafe5f1acc2e ]

We use delayed_work in HPD handling, and cancel any scheduled work in tfp410_fini using cancel_delayed_work_sync(). However, we have only initialized the delayed work if we actually have a HPD interrupt configured in the DT, but in the tfp410_fini, we always cancel the work, possibly causing a WARN().

Fix this by doing the cancel only if we actually had the delayed work set up.

---
 drivers/gpu/drm/bridge/ti-tfp410.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/bridge/ti-tfp410.c +2 -1
index a879aac21246..3a8af9978ebd 100644
@@ -372,7 +372,8 @@ static int tfp410_fini(struct device *dev)
 {
 	struct tfp410 *dvi = dev_get_drvdata(dev);
 
-	cancel_delayed_work_sync(&dvi->hpd_work);
+	if (dvi->hpd_irq >= 0)
+		cancel_delayed_work_sync(&dvi->hpd_work);
 
 	drm_bridge_remove(&dvi->bridge);
 
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#65 lore raw

PATCH 61/171 dma-remap: Avoid de-referencing NULL atomic_pool

In reply to Sasha Levin

From: Florian Fainelli <[email protected]>

[ Upstream commit 4b4b077cbd0a998aebaa72c199e06b8a4c8dcfee ]

With architectures allowing the kernel to be placed almost arbitrarily in memory (e.g.: ARM64), it is possible to have the kernel resides at physical addresses above 4GB, resulting in neither the default CMA area, nor the atomic pool from successfully allocating. This does not prevent specific peripherals from working though, one example is XHCI, which still operates correctly.

Trouble comes when the XHCI driver gets suspended and resumed, since we can now trigger the following NPD:

[   12.664170] usb usb1: root hub lost power or was reset
[   12.669387] usb usb2: root hub lost power or was reset
[   12.674662] Unable to handle kernel NULL pointer dereference at virtual address 00000008
[   12.682896] pgd = ffffffc1365a7000
[   12.686386] [00000008] *pgd=0000000136500003, *pud=0000000136500003, *pmd=0000000000000000
[   12.694897] Internal error: Oops: 96000006 [#1] SMP
[   12.699843] Modules linked in:
[   12.702980] CPU: 0 PID: 1499 Comm: pml Not tainted 4.9.135-1.13pre #51
[   12.709577] Hardware name: BCM97268DV (DT)
[   12.713736] task: ffffffc136bb6540 task.stack: ffffffc1366cc000
[   12.719740] PC is at addr_in_gen_pool+0x4/0x48
[   12.724253] LR is at __dma_free+0x64/0xbc
[   12.728325] pc : [<ffffff80083c0df8>] lr : [<ffffff80080979e0>] pstate: 60000145
[   12.735825] sp : ffffffc1366cf990
[   12.739196] x29: ffffffc1366cf990 x28: ffffffc1366cc000
[   12.744608] x27: 0000000000000000 x26: ffffffc13a8568c8
[   12.750020] x25: 0000000000000000 x24: ffffff80098f9000
[   12.755433] x23: 000000013a5ff000 x22: ffffff8009c57000
[   12.760844] x21: ffffffc13a856810 x20: 0000000000000000
[   12.766255] x19: 0000000000001000 x18: 000000000000000a
[   12.771667] x17: 0000007f917553e0 x16: 0000000000001002
[   12.777078] x15: 00000000000a36cb x14: ffffff80898feb77
[   12.782490] x13: ffffffffffffffff x12: 0000000000000030
[   12.787899] x11: 00000000fffffffe x10: ffffff80098feb7f
[   12.793311] x9 : 0000000005f5e0ff x8 : 65776f702074736f
[   12.798723] x7 : 6c2062756820746f x6 : ffffff80098febb1
[   12.804134] x5 : ffffff800809797c x4 : 0000000000000000
[   12.809545] x3 : 000000013a5ff000 x2 : 0000000000000fff
[   12.814955] x1 : ffffff8009c57000 x0 : 0000000000000000
[   12.820363]
[   12.821907] Process pml (pid: 1499, stack limit = 0xffffffc1366cc020)
[   12.828421] Stack: (0xffffffc1366cf990 to 0xffffffc1366d0000)
[   12.834240] f980:                                   ffffffc1366cf9e0 ffffff80086004d0
[   12.842186] f9a0: ffffffc13ab08238 0000000000000010 ffffff80097c2218 ffffffc13a856810
[   12.850131] f9c0: ffffff8009c57000 000000013a5ff000 0000000000000008 000000013a5ff000
[   12.858076] f9e0: ffffffc1366cfa50 ffffff80085f9250 ffffffc13ab08238 0000000000000004
[   12.866021] fa00: ffffffc13ab08000 ffffff80097b6000 ffffffc13ab08130 0000000000000001
[   12.873966] fa20: 0000000000000008 ffffffc13a8568c8 0000000000000000 ffffffc1366cc000
[   12.881911] fa40: ffffffc13ab08130 0000000000000001 ffffffc1366cfa90 ffffff80085e3de8
[   12.889856] fa60: ffffffc13ab08238 0000000000000000 ffffffc136b75b00 0000000000000000
[   12.897801] fa80: 0000000000000010 ffffff80089ccb92 ffffffc1366cfac0 ffffff80084ad040
[   12.905746] faa0: ffffffc13a856810 0000000000000000 ffffff80084ad004 ffffff80084b91a8
[   12.913691] fac0: ffffffc1366cfae0 ffffff80084b91b4 ffffffc13a856810 ffffff80080db5cc
[   12.921636] fae0: ffffffc1366cfb20 ffffff80084b96bc ffffffc13a856810 0000000000000010
[   12.929581] fb00: ffffffc13a856870 0000000000000000 ffffffc13a856810 ffffff800984d2b8
[   12.937526] fb20: ffffffc1366cfb50 ffffff80084baa70 ffffff8009932ad0 ffffff800984d260
[   12.945471] fb40: 0000000000000010 00000002eff0a065 ffffffc1366cfbb0 ffffff80084bafbc
[   12.953415] fb60: 0000000000000010 0000000000000003 ffffff80098fe000 0000000000000000
[   12.961360] fb80: ffffff80097b6000 ffffff80097b6dc8 ffffff80098c12b8 ffffff80098c12f8
[   12.969306] fba0: ffffff8008842000 ffffff80097b6dc8 ffffffc1366cfbd0 ffffff80080e0d88
[   12.977251] fbc0: 00000000fffffffb ffffff80080e10bc ffffffc1366cfc60 ffffff80080e16a8
[   12.985196] fbe0: 0000000000000000 0000000000000003 ffffff80097b6000 ffffff80098fe9f0
[   12.993140] fc00: ffffff80097d4000 ffffff8008983802 0000000000000123 0000000000000040
[   13.001085] fc20: ffffff8008842000 ffffffc1366cc000 ffffff80089803c2 00000000ffffffff
[   13.009029] fc40: 0000000000000000 0000000000000000 ffffffc1366cfc60 0000000000040987
[   13.016974] fc60: ffffffc1366cfcc0 ffffff80080dfd08 0000000000000003 0000000000000004
[   13.024919] fc80: 0000000000000003 ffffff80098fea08 ffffffc136577ec0 ffffff80089803c2
[   13.032864] fca0: 0000000000000123 0000000000000001 0000000500000002 0000000000040987
[   13.040809] fcc0: ffffffc1366cfd00 ffffff80083a89d4 0000000000000004 ffffffc136577ec0
[   13.048754] fce0: ffffffc136610cc0 ffffffffffffffea ffffffc1366cfeb0 ffffffc136610cd8
[   13.056700] fd00: ffffffc1366cfd10 ffffff800822a614 ffffffc1366cfd40 ffffff80082295d4
[   13.064645] fd20: 0000000000000004 ffffffc136577ec0 ffffffc136610cc0 0000000021670570
[   13.072590] fd40: ffffffc1366cfd80 ffffff80081b5d10 ffffff80097b6000 ffffffc13aae4200
[   13.080536] fd60: ffffffc1366cfeb0 0000000000000004 0000000021670570 0000000000000004
[   13.088481] fd80: ffffffc1366cfe30 ffffff80081b6b20 ffffffc13aae4200 0000000000000000
[   13.096427] fda0: 0000000000000004 0000000021670570 ffffffc1366cfeb0 ffffffc13a838200
[   13.104371] fdc0: 0000000000000000 000000000000000a ffffff80097b6000 0000000000040987
[   13.112316] fde0: ffffffc1366cfe20 ffffff80081b3af0 ffffffc13a838200 0000000000000000
[   13.120261] fe00: ffffffc1366cfe30 ffffff80081b6b0c ffffffc13aae4200 0000000000000000
[   13.128206] fe20: 0000000000000004 0000000000040987 ffffffc1366cfe70 ffffff80081b7dd8
[   13.136151] fe40: ffffff80097b6000 ffffffc13aae4200 ffffffc13aae4200 fffffffffffffff7
[   13.144096] fe60: 0000000021670570 ffffffc13a8c63c0 0000000000000000 ffffff8008083180
[   13.152042] fe80: ffffffffffffff1d 0000000021670570 ffffffffffffffff 0000007f917ad9b8
[   13.159986] fea0: 0000000020000000 0000000000000015 0000000000000000 0000000000040987
[   13.167930] fec0: 0000000000000001 0000000021670570 0000000000000004 0000000000000000
[   13.175874] fee0: 0000000000000888 0000440110000000 000000000000006d 0000000000000003
[   13.183819] ff00: 0000000000000040 ffffff80ffffffc8 0000000000000000 0000000000000020
[   13.191762] ff20: 0000000000000000 0000000000000000 0000000000000001 0000000000000000
[   13.199707] ff40: 0000000000000000 0000007f917553e0 0000000000000000 0000000000000004
[   13.207651] ff60: 0000000021670570 0000007f91835480 0000000000000004 0000007f91831638
[   13.215595] ff80: 0000000000000004 00000000004b0de0 00000000004b0000 0000000000000000
[   13.223539] ffa0: 0000000000000000 0000007fc92ac8c0 0000007f9175d178 0000007fc92ac8c0
[   13.231483] ffc0: 0000007f917ad9b8 0000000020000000 0000000000000001 0000000000000040
[   13.239427] ffe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[   13.247360] Call trace:
[   13.249866] Exception stack(0xffffffc1366cf7a0 to 0xffffffc1366cf8d0)
[   13.256386] f7a0: 0000000000001000 0000007fffffffff ffffffc1366cf990 ffffff80083c0df8
[   13.264331] f7c0: 0000000060000145 ffffff80089b5001 ffffffc13ab08130 0000000000000001
[   13.272275] f7e0: 0000000000000008 ffffffc13a8568c8 0000000000000000 0000000000000000
[   13.280220] f800: ffffffc1366cf960 ffffffc1366cf960 ffffffc1366cf930 00000000ffffffd8
[   13.288165] f820: ffffff8009931ac0 4554535953425553 4544006273753d4d 3831633d45434956
[   13.296110] f840: ffff003832313a39 ffffff800845926c ffffffc1366cf880 0000000000040987
[   13.304054] f860: 0000000000000000 ffffff8009c57000 0000000000000fff 000000013a5ff000
[   13.311999] f880: 0000000000000000 ffffff800809797c ffffff80098febb1 6c2062756820746f
[   13.319944] f8a0: 65776f702074736f 0000000005f5e0ff ffffff80098feb7f 00000000fffffffe
[   13.327884] f8c0: 0000000000000030 ffffffffffffffff
[   13.332835] [<ffffff80083c0df8>] addr_in_gen_pool+0x4/0x48
[   13.338398] [<ffffff80086004d0>] xhci_mem_cleanup+0xc8/0x51c
[   13.344137] [<ffffff80085f9250>] xhci_resume+0x308/0x65c
[   13.349524] [<ffffff80085e3de8>] xhci_brcm_resume+0x84/0x8c
[   13.355174] [<ffffff80084ad040>] platform_pm_resume+0x3c/0x64
[   13.360997] [<ffffff80084b91b4>] dpm_run_callback+0x5c/0x15c
[   13.366732] [<ffffff80084b96bc>] device_resume+0xc0/0x190
[   13.372205] [<ffffff80084baa70>] dpm_resume+0x144/0x2cc
[   13.377504] [<ffffff80084bafbc>] dpm_resume_end+0x20/0x34
[   13.382980] [<ffffff80080e0d88>] suspend_devices_and_enter+0x104/0x704
[   13.389585] [<ffffff80080e16a8>] pm_suspend+0x320/0x53c
[   13.394881] [<ffffff80080dfd08>] state_store+0xbc/0xe0
[   13.400094] [<ffffff80083a89d4>] kobj_attr_store+0x14/0x24
[   13.405655] [<ffffff800822a614>] sysfs_kf_write+0x60/0x70
[   13.411128] [<ffffff80082295d4>] kernfs_fop_write+0x130/0x194
[   13.416954] [<ffffff80081b5d10>] __vfs_write+0x60/0x150
[   13.422254] [<ffffff80081b6b20>] vfs_write+0xc8/0x164
[   13.427376] [<ffffff80081b7dd8>] SyS_write+0x70/0xc8
[   13.432412] [<ffffff8008083180>] el0_svc_naked+0x34/0x38
[   13.437800] Code: 92800173 97f6fb9e 17fffff5 d1000442 (f8408c03)
[   13.444033] ---[ end trace 2effe12f909ce205 ]---

The call path leading to this problem is xhci_mem_cleanup() -> dma_free_coherent() -> dma_free_from_pool() -> addr_in_gen_pool. If the atomic_pool is NULL, we can't possibly have the address in the atomic pool anyway, so guard against that.

---
 kernel/dma/remap.c | 3 +++
 1 file changed, 3 insertions(+)
kernel/dma/remap.c +3 -0
index 7a723194ecbe..0207e3764d52 100644
@@ -158,6 +158,9 @@ int __init dma_atomic_pool_init(gfp_t gfp, pgprot_t prot)
 
 bool dma_in_atomic_pool(void *start, size_t size)
 {
+	if (unlikely(!atomic_pool))
+		return false;
+
 	return addr_in_gen_pool(atomic_pool, (unsigned long)start, size);
 }
 
Signature · 1 line
2.20.1
author maintainer
#74 lore raw

PATCH 70/171 usb: dwc3: Fix core validation in probe, move after clocks are enabled

In reply to Sasha Levin

From: Enric Balletbo i Serra <[email protected]>

[ Upstream commit dc1b5d9aed1794b5a1c6b0da46e372cc09974cbc ]

The required clocks needs to be enabled before the first register access. After commit fe8abf332b8f ("usb: dwc3: support clocks and resets for DWC3 core"), this happens when the dwc3_core_is_valid function is called, but the mentioned commit adds that call in the wrong place, before the clocks are enabled. So, move that call after the clk_bulk_enable() to ensure the clocks are enabled and the reset deasserted.

I detected this while, as experiment, I tried to move the clocks and resets from the glue layer to the DWC3 core on a Samsung Chromebook Plus.

That was not detected before because, in most cases, the glue layer initializes SoC-specific things and then populates the child "snps,dwc3" with those clocks already enabled.

Fixes b873e2d0ea1ef ("usb: dwc3: Do core validation early on probe")
---
 drivers/usb/dwc3/core.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)
drivers/usb/dwc3/core.c +7 -5
index 4aff1d8dbc4f..6e9e172010fc 100644
@@ -1423,11 +1423,6 @@ static int dwc3_probe(struct platform_device *pdev)
 	dwc->regs	= regs;
 	dwc->regs_size	= resource_size(&dwc_res);
 
-	if (!dwc3_core_is_valid(dwc)) {
-		dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
-		return -ENODEV;
-	}
-
 	dwc3_get_properties(dwc);
 
 	dwc->reset = devm_reset_control_get_optional_shared(dev, NULL);
@@ -1460,6 +1455,12 @@ static int dwc3_probe(struct platform_device *pdev)
 	if (ret)
 		goto unprepare_clks;
 
+	if (!dwc3_core_is_valid(dwc)) {
+		dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
+		ret = -ENODEV;
+		goto disable_clks;
+	}
+
 	platform_set_drvdata(pdev, dwc);
 	dwc3_cache_hwparams(dwc);
 
@@ -1525,6 +1526,7 @@ static int dwc3_probe(struct platform_device *pdev)
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
+disable_clks:
 	clk_bulk_disable(dwc->num_clks, dwc->clks);
 unprepare_clks:
 	clk_bulk_unprepare(dwc->num_clks, dwc->clks);
Signature · 1 line
2.20.1
author maintainer
#68 lore raw

PATCH 64/171 iio:core: Fix bug in length of event info_mask and catch unhandled bits set in masks.

In reply to Sasha Levin

From: Young Xiao <[email protected]>

[ Upstream commit 936d3e536dcf88ce80d27bdb637009b13dba6d8c ]

The incorrect limit for the for_each_set_bit loop was noticed whilst fixing this other case. Note that as we only have 3 possible entries a the moment and the value was set to 4, the bug would not have any effect currently. It will bite fairly soon though, so best fix it now.

See commit ef4b4856593f ("iio:core: Fix bug in length of event info_mask and catch unhandled bits set in masks.") for details.

---
 drivers/iio/industrialio-core.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/iio/industrialio-core.c +2 -0
index 245b5844028d..2da099badce6 100644
@@ -1104,6 +1104,8 @@ static int iio_device_add_info_mask_type_avail(struct iio_dev *indio_dev,
 	char *avail_postfix;
 
 	for_each_set_bit(i, infomask, sizeof(*infomask) * 8) {
+		if (i >= ARRAY_SIZE(iio_chan_info_postfix))
+			return -EINVAL;
 		avail_postfix = kasprintf(GFP_KERNEL,
 					  "%s_available",
 					  iio_chan_info_postfix[i]);
Signature · 1 line
2.20.1
author maintainer
#76 lore raw

PATCH 72/171 usb: gadget: storage: Remove warning message

In reply to Sasha Levin

From: EJ Hsu <[email protected]>

[ Upstream commit e70b3f5da00119e057b7faa557753fee7f786f17 ]

This change is to fix below warning message in following scenario:
usb_composite_setup_continue: Unexpected call

When system tried to enter suspend, the fsg_disable() will be called to disable fsg driver and send a signal to fsg_main_thread. However, at this point, the fsg_main_thread has already been frozen and can not respond to this signal. So, this signal will be pended until fsg_main_thread wakes up.

Once system resumes from suspend, fsg_main_thread will detect a signal pended and do some corresponding action (in handle_exception()). Then, host will send some setup requests (get descriptor, set configuration...) to UDC driver trying to enumerate this device. During the handling of "set configuration" request, it will try to sync up with fsg_main_thread by sending a signal (which is the same as the signal sent by fsg_disable) to it. In a similar manner, once the fsg_main_thread receives this signal, it will call handle_exception() to handle the request.

However, if the fsg_main_thread wakes up from suspend a little late and "set configuration" request from Host arrives a little earlier, fsg_main_thread might come across the request from "set configuration" when it handles the signal from fsg_disable(). In this case, it will handle this request as well. So, when fsg_main_thread tries to handle the signal sent from "set configuration" later, there will nothing left to do and warning message "Unexpected call" is printed.

---
 drivers/usb/gadget/function/f_mass_storage.c | 21 ++++++++++++++------
 drivers/usb/gadget/function/storage_common.h |  1 +
 2 files changed, 16 insertions(+), 6 deletions(-)
drivers/usb/gadget/function/f_mass_storage.c +15 -6
index 043f97ad8f22..982c3e89eb0d 100644
@@ -2293,8 +2293,7 @@ static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 static void fsg_disable(struct usb_function *f)
 {
 	struct fsg_dev *fsg = fsg_from_func(f);
-	fsg->common->new_fsg = NULL;
-	raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
+	raise_exception(fsg->common, FSG_STATE_DISCONNECT);
 }
 
 
@@ -2307,6 +2306,7 @@ static void handle_exception(struct fsg_common *common)
 	enum fsg_state		old_state;
 	struct fsg_lun		*curlun;
 	unsigned int		exception_req_tag;
+	struct fsg_dev		*fsg;
 
 	/*
 	 * Clear the existing signals.  Anything but SIGUSR1 is converted
@@ -2413,9 +2413,19 @@ static void handle_exception(struct fsg_common *common)
 		break;
 
 	case FSG_STATE_CONFIG_CHANGE:
-		do_set_interface(common, common->new_fsg);
-		if (common->new_fsg)
+		fsg = common->new_fsg;
+		/*
+		 * Add a check here to double confirm if a disconnect event
+		 * occurs and common->new_fsg has been cleared.
+		 */
+		if (fsg) {
+			do_set_interface(common, fsg);
 			usb_composite_setup_continue(common->cdev);
+		}
+		break;
+
+	case FSG_STATE_DISCONNECT:
+		do_set_interface(common, NULL);
 		break;
 
 	case FSG_STATE_EXIT:
@@ -2989,8 +2999,7 @@ static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
 
 	DBG(fsg, "unbind\n");
 	if (fsg->common->fsg == fsg) {
-		fsg->common->new_fsg = NULL;
-		raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
+		raise_exception(fsg->common, FSG_STATE_DISCONNECT);
 		/* FIXME: make interruptible or killable somehow? */
 		wait_event(common->fsg_wait, common->fsg != fsg);
 	}
drivers/usb/gadget/function/storage_common.h +1 -0
index e5e3a2553aaa..12687f7e3de9 100644
@@ -161,6 +161,7 @@ enum fsg_state {
 	FSG_STATE_ABORT_BULK_OUT,
 	FSG_STATE_PROTOCOL_RESET,
 	FSG_STATE_CONFIG_CHANGE,
+	FSG_STATE_DISCONNECT,
 	FSG_STATE_EXIT,
 	FSG_STATE_TERMINATED
 };
Signature · 1 line
2.20.1
author maintainer
#78 lore raw

PATCH 74/171 KVM: nVMX: Intercept VMWRITEs to GUEST_{CS,SS}_AR_BYTES

In reply to Sasha Levin

From: Sean Christopherson <[email protected]>

[ Upstream commit b643780562af5378ef7fe731c65b8f93e49c59c6 ]

VMMs frequently read the guest's CS and SS AR bytes to detect 64-bit mode and CPL respectively, but effectively never write said fields once the VM is initialized. Intercepting VMWRITEs for the two fields saves ~55 cycles in copy_shadow_to_vmcs12().

Because some Intel CPUs, e.g. Haswell, drop the reserved bits of the guest access rights fields on VMWRITE, exposing the fields to L1 for VMREAD but not VMWRITE leads to inconsistent behavior between L1 and L2. On hardware that drops the bits, L1 will see the stripped down value due to reading the value from hardware, while L2 will see the full original value as stored by KVM. To avoid such an inconsistency, emulate the behavior on all CPUS, but only for intercepted VMWRITEs so as to avoid introducing pointless latency into copy_shadow_to_vmcs12(), e.g. if the emulation were added to vmcs12_write_any().

Since the AR_BYTES emulation is done only for intercepted VMWRITE, if a future patch (re)exposed AR_BYTES for both VMWRITE and VMREAD, then KVM would end up with incosistent behavior on pre-Haswell hardware, e.g. KVM would drop the reserved bits on intercepted VMWRITE, but direct VMWRITE to the shadow VMCS would not drop the bits. Add a WARN in the shadow field initialization to detect any attempt to expose an AR_BYTES field without updating vmcs12_write_any().

Note, emulation of the AR_BYTES reserved bit behavior is based on a patch[1] from Jim Mattson that applied the emulation to all writes to vmcs12 so that live migration across different generations of hardware would not introduce divergent behavior. But given that live migration of nested state has already been enabled, that ship has sailed (not to mention that no sane VMM will be affected by this behavior).

[1] https://patchwork.kernel.org/patch/10483321/

---
 arch/x86/kvm/vmx/nested.c             | 15 +++++++++++++++
 arch/x86/kvm/vmx/vmcs_shadow_fields.h |  4 ++--
 2 files changed, 17 insertions(+), 2 deletions(-)
arch/x86/kvm/vmx/nested.c +15 -0
index 7958189ee702..4c0aa676f843 100644
@@ -91,6 +91,10 @@ static void init_vmcs_shadow_fields(void)
 			pr_err("Missing field from shadow_read_write_field %x\n",
 			       field + 1);
 
+		WARN_ONCE(field >= GUEST_ES_AR_BYTES &&
+			  field <= GUEST_TR_AR_BYTES,
+			  "Update vmcs12_write_any() to expose AR_BYTES RW");
+
 		/*
 		 * PML and the preemption timer can be emulated, but the
 		 * processor cannot vmwrite to fields that don't exist
@@ -4496,6 +4500,17 @@ static int handle_vmwrite(struct kvm_vcpu *vcpu)
 		vmcs12 = get_shadow_vmcs12(vcpu);
 	}
 
+	/*
+	 * Some Intel CPUs intentionally drop the reserved bits of the AR byte
+	 * fields on VMWRITE.  Emulate this behavior to ensure consistent KVM
+	 * behavior regardless of the underlying hardware, e.g. if an AR_BYTE
+	 * field is intercepted for VMWRITE but not VMREAD (in L1), then VMREAD
+	 * from L1 will return a different value than VMREAD from L2 (L1 sees
+	 * the stripped down value, L2 sees the full value as stored by KVM).
+	 */
+	if (field >= GUEST_ES_AR_BYTES && field <= GUEST_TR_AR_BYTES)
+		field_value &= 0x1f0ff;
+
 	if (vmcs12_write_any(vmcs12, field, field_value) < 0)
 		return nested_vmx_failValid(vcpu,
 			VMXERR_UNSUPPORTED_VMCS_COMPONENT);
arch/x86/kvm/vmx/vmcs_shadow_fields.h +2 -2
index 132432f375c2..97dd5295be31 100644
@@ -40,14 +40,14 @@ SHADOW_FIELD_RO(VM_EXIT_INSTRUCTION_LEN)
 SHADOW_FIELD_RO(IDT_VECTORING_INFO_FIELD)
 SHADOW_FIELD_RO(IDT_VECTORING_ERROR_CODE)
 SHADOW_FIELD_RO(VM_EXIT_INTR_ERROR_CODE)
+SHADOW_FIELD_RO(GUEST_CS_AR_BYTES)
+SHADOW_FIELD_RO(GUEST_SS_AR_BYTES)
 SHADOW_FIELD_RW(CPU_BASED_VM_EXEC_CONTROL)
 SHADOW_FIELD_RW(EXCEPTION_BITMAP)
 SHADOW_FIELD_RW(VM_ENTRY_EXCEPTION_ERROR_CODE)
 SHADOW_FIELD_RW(VM_ENTRY_INTR_INFO_FIELD)
 SHADOW_FIELD_RW(VM_ENTRY_INSTRUCTION_LEN)
 SHADOW_FIELD_RW(TPR_THRESHOLD)
-SHADOW_FIELD_RW(GUEST_CS_AR_BYTES)
-SHADOW_FIELD_RW(GUEST_SS_AR_BYTES)
 SHADOW_FIELD_RW(GUEST_INTERRUPTIBILITY_INFO)
 SHADOW_FIELD_RW(VMX_PREEMPTION_TIMER_VALUE)
 
Signature · 1 line
2.20.1
author maintainer
#85 lore raw

PATCH 81/171 phy: renesas: rcar-gen3-usb2: fix imbalance powered flag

In reply to Sasha Levin

From: Yoshihiro Shimoda <[email protected]>

[ Upstream commit 5c9dc6379f539c68a0fdd39e39a9d359545649e9 ]

The powered flag should be set for any other phys anyway. Also the flag should be locked by the channel. Otherwise, after we have revised the device tree for the usb phy, the following warning happened during a second system suspend. And if the driver doesn't lock the flag, an imbalance is possible when enabling the regulator during system resume. So, this patch fixes the issues.

< The warning >

[   56.026531] unbalanced disables for USB20_VBUS0
[   56.031108] WARNING: CPU: 3 PID: 513 at drivers/regulator/core.c:2593 _regula
tor_disable+0xe0/0x1c0
[   56.040146] Modules linked in: rcar_du_drm rcar_lvds drm_kms_helper drm drm_p

anel_orientation_quirks vsp1 videobuf2_vmalloc videobuf2_dma_contig videobuf2_me mops videobuf2_v4l2 videobuf2_common videodev snd_soc_rcar renesas_usbhs snd_soc _audio_graph_card media snd_soc_simple_card_utils crct10dif_ce renesas_usb3 snd_ soc_ak4613 rcar_fcp pwm_rcar usb_dmac phy_rcar_gen3_usb3 pwm_bl ipv6

[   56.074047] CPU: 3 PID: 513 Comm: kworker/u16:19 Not tainted 5.2.0-rc3-00001-
g5f20a19 #6
[   56.082129] Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (
DT)
[   56.089524] Workqueue: events_unbound async_run_entry_fn
[   56.094832] pstate: 40000005 (nZcv daif -PAN -UAO)
[   56.099617] pc : _regulator_disable+0xe0/0x1c0
[   56.104054] lr : _regulator_disable+0xe0/0x1c0
[   56.108489] sp : ffff0000121c3ae0
[   56.111796] x29: ffff0000121c3ae0 x28: 0000000000000000
[   56.117102] x27: 0000000000000000 x26: ffff000010fe0e60
[   56.122407] x25: 0000000000000002 x24: 0000000000000001
[   56.127712] x23: 0000000000000002 x22: ffff8006f99d4000
[   56.133017] x21: ffff8006f99cc000 x20: ffff8006f9846800
[   56.138322] x19: ffff8006f9846800 x18: ffffffffffffffff
[   56.143626] x17: 0000000000000000 x16: 0000000000000000
[   56.148931] x15: ffff0000112f96c8 x14: ffff0000921c37f7
[   56.154235] x13: ffff0000121c3805 x12: ffff000011312000
[   56.159540] x11: 0000000005f5e0ff x10: ffff0000112f9f20
[   56.164844] x9 : ffff0000112d3018 x8 : 00000000000001ad
[   56.170149] x7 : 00000000ffffffcc x6 : ffff8006ff768180
[   56.175453] x5 : ffff8006ff768180 x4 : 0000000000000000
[   56.180758] x3 : ffff8006ff76ef10 x2 : ffff8006ff768180
[   56.186062] x1 : 3d2eccbaead8fb00 x0 : 0000000000000000
[   56.191367] Call trace:
[   56.193808]  _regulator_disable+0xe0/0x1c0
[   56.197899]  regulator_disable+0x40/0x78
[   56.201820]  rcar_gen3_phy_usb2_power_off+0x3c/0x50
[   56.206692]  phy_power_off+0x48/0xd8
[   56.210263]  usb_phy_roothub_power_off+0x30/0x50
[   56.214873]  usb_phy_roothub_suspend+0x1c/0x50
[   56.219311]  hcd_bus_suspend+0x13c/0x168
[   56.223226]  generic_suspend+0x4c/0x58
[   56.226969]  usb_suspend_both+0x1ac/0x238
[   56.230972]  usb_suspend+0xcc/0x170
[   56.234455]  usb_dev_suspend+0x10/0x18
[   56.238199]  dpm_run_callback.isra.6+0x20/0x68
[   56.242635]  __device_suspend+0x110/0x308
[   56.246637]  async_suspend+0x24/0xa8
[   56.250205]  async_run_entry_fn+0x40/0xf8
[   56.254210]  process_one_work+0x1e0/0x320
[   56.258211]  worker_thread+0x40/0x450
[   56.261867]  kthread+0x124/0x128
[   56.265094]  ret_from_fork+0x10/0x18
[   56.268661] ---[ end trace 86d7ec5de5c517af ]---
[   56.273290] phy phy-ee080200.usb-phy.10: phy poweroff failed --> -5
---
 drivers/phy/renesas/phy-rcar-gen3-usb2.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)
drivers/phy/renesas/phy-rcar-gen3-usb2.c +15 -4
index 1322185a00a2..8ffba67568ec 100644
@@ -13,6 +13,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
@@ -106,6 +107,7 @@ struct rcar_gen3_chan {
 	struct rcar_gen3_phy rphys[NUM_OF_PHYS];
 	struct regulator *vbus;
 	struct work_struct work;
+	struct mutex lock;	/* protects rphys[...].powered */
 	enum usb_dr_mode dr_mode;
 	bool extcon_host;
 	bool is_otg_channel;
@@ -437,15 +439,16 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p)
 	struct rcar_gen3_chan *channel = rphy->ch;
 	void __iomem *usb2_base = channel->base;
 	u32 val;
-	int ret;
+	int ret = 0;
 
+	mutex_lock(&channel->lock);
 	if (!rcar_gen3_are_all_rphys_power_off(channel))
-		return 0;
+		goto out;
 
 	if (channel->vbus) {
 		ret = regulator_enable(channel->vbus);
 		if (ret)
-			return ret;
+			goto out;
 	}
 
 	val = readl(usb2_base + USB2_USBCTR);
@@ -454,7 +457,10 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p)
 	val &= ~USB2_USBCTR_PLL_RST;
 	writel(val, usb2_base + USB2_USBCTR);
 
+out:
+	/* The powered flag should be set for any other phys anyway */
 	rphy->powered = true;
+	mutex_unlock(&channel->lock);
 
 	return 0;
 }
@@ -465,14 +471,18 @@ static int rcar_gen3_phy_usb2_power_off(struct phy *p)
 	struct rcar_gen3_chan *channel = rphy->ch;
 	int ret = 0;
 
+	mutex_lock(&channel->lock);
 	rphy->powered = false;
 
 	if (!rcar_gen3_are_all_rphys_power_off(channel))
-		return 0;
+		goto out;
 
 	if (channel->vbus)
 		ret = regulator_disable(channel->vbus);
 
+out:
+	mutex_unlock(&channel->lock);
+
 	return ret;
 }
 
@@ -639,6 +649,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 	if (!phy_usb2_ops)
 		return -EINVAL;
 
+	mutex_init(&channel->lock);
 	for (i = 0; i < NUM_OF_PHYS; i++) {
 		channel->rphys[i].phy = devm_phy_create(dev, NULL,
 							phy_usb2_ops);
Signature · 1 line
2.20.1
author maintainer
#86 lore raw

PATCH 82/171 PCI: sysfs: Ignore lockdep for remove attribute

In reply to Sasha Levin

From: Marek Vasut <[email protected]>

[ Upstream commit dc6b698a86fe40a50525433eb8e92a267847f6f9 ]

With CONFIG_PROVE_LOCKING=y, using sysfs to remove a bridge with a device below it causes a lockdep warning, e.g.,

  # echo 1 > /sys/class/pci_bus/0000:00/device/0000:00:00.0/remove
  ============================================
  WARNING: possible recursive locking detected
  ...
  pci_bus 0000:01: busn_res: [bus 01] is released

The remove recursively removes the subtree below the bridge. Each call uses a different lock so there's no deadlock, but the locks were all created with the same lockdep key so the lockdep checker can't tell them apart.

Mark the "remove" sysfs attribute with __ATTR_IGNORE_LOCKDEP() as it is safe to ignore the lockdep check between different "remove" kernfs instances.

There's discussion about a similar issue in USB at [1], which resulted in 356c05d58af0 ("sysfs: get rid of some lockdep false positives") and e9b526fe7048 ("i2c: suppress lockdep warning on delete_device"), which do basically the same thing for USB "remove" and i2c "delete_device" files.

[1] https://lore.kernel.org/r/[email protected]

[bhelgaas: trim commit log, details at above links]
Cc Geert Uytterhoeven <[email protected]>
Cc Phil Edworthy <[email protected]>
Cc Simon Horman <[email protected]>
Cc Tejun Heo <[email protected]>
Cc Wolfram Sang <[email protected]>
---
 drivers/pci/pci-sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pci/pci-sysfs.c +1 -1
index 6d27475e39b2..4e83c347de5d 100644
@@ -477,7 +477,7 @@ static ssize_t remove_store(struct device *dev, struct device_attribute *attr,
 		pci_stop_and_remove_bus_device_locked(to_pci_dev(dev));
 	return count;
 }
-static struct device_attribute dev_remove_attr = __ATTR(remove,
+static struct device_attribute dev_remove_attr = __ATTR_IGNORE_LOCKDEP(remove,
 							(S_IWUSR|S_IWGRP),
 							NULL, remove_store);
 
Signature · 1 line
2.20.1
author maintainer
#89 lore raw

PATCH 85/171 net/ipv4: fib_trie: Avoid cryptic ternary expressions

In reply to Sasha Levin

From: Nathan Huckleberry <[email protected]>

[ Upstream commit 25cec756891e8733433efea63b2254ddc93aa5cc ]

empty_child_inc/dec() use the ternary operator for conditional operations. The conditions involve the post/pre in/decrement operator and the operation is only performed when the condition is *not* true. This is hard to parse for humans, use a regular 'if' construct instead and perform the in/decrement separately.

This also fixes two warnings that are emitted about the value of the ternary expression being unused, when building the kernel with clang + "kbuild: Remove unnecessary -Wno-unused-value"
(https://lore.kernel.org/patchwork/patch/1089869/):

CC net/ipv4/fib_trie.o
net/ipv4/fib_trie.c:351:2: error: expression result unused [-Werror,-Wunused-value]

        ++tn_info(n)->empty_children ? : ++tn_info(n)->full_children;
Fixes 95f60ea3e99a ("fib_trie: Add collapse() and should_collapse() to resize")
---
 scripts/Makefile.extrawarn | 1 -
 1 file changed, 1 deletion(-)
scripts/Makefile.extrawarn +0 -1
index 3ab8d1a303cd..b293246e48fe 100644
@@ -68,7 +68,6 @@ else
 
 ifdef CONFIG_CC_IS_CLANG
 KBUILD_CFLAGS += -Wno-initializer-overrides
-KBUILD_CFLAGS += -Wno-unused-value
 KBUILD_CFLAGS += -Wno-format
 KBUILD_CFLAGS += -Wno-sign-compare
 KBUILD_CFLAGS += -Wno-format-zero-length
Signature · 1 line
2.20.1
author maintainer
#90 lore raw

PATCH 86/171 kbuild: Add -Werror=unknown-warning-option to CLANG_FLAGS

In reply to Sasha Levin

From: Nathan Chancellor <[email protected]>

[ Upstream commit 589834b3a0097a4908f4112eac0ca2feb486fa32 ]

In commit ebcc5928c5d9 ("arm64: Silence gcc warnings about arch ABI drift"), the arm64 Makefile added -Wno-psabi to KBUILD_CFLAGS, which is a GCC only option so clang rightfully complains:

warning: unknown warning option '-Wno-psabi' [-Wunknown-warning-option]

https://clang.llvm.org/docs/DiagnosticsReference.html#wunknown-warning-option

However, by default, this is merely a warning so the build happily goes on with a slew of these warnings in the process.

Commit c3f0d0bc5b01 ("kbuild, LLVMLinux: Add -Werror to cc-option to support clang") worked around this behavior in cc-option by adding -Werror so that unknown flags cause an error. However, this all happens silently and when an unknown flag is added to the build unconditionally like -Wno-psabi, cc-option will always fail because there is always an unknown flag in the list of flags. This manifested as link time failures in the arm64 libstub because -fno-stack-protector didn't get added to KBUILD_CFLAGS.

To avoid these weird cryptic failures in the future, make clang behave like gcc and immediately error when it encounters an unknown flag by adding -Werror=unknown-warning-option to CLANG_FLAGS. This can be added unconditionally for clang because it is supported by at least 3.0.0, according to godbolt [1] and 4.0.0, according to its documentation [2], which is far earlier than we typically support.

[1]: https://godbolt.org/z/7F7rm3
[2]: https://releases.llvm.org/4.0.0/tools/clang/docs/DiagnosticsReference.html#wunknown-warning-option

---
 Makefile | 1 +
 1 file changed, 1 insertion(+)
Makefile +1 -0
index d8f5dbfd6b76..f02079b98e7e 100644
@@ -528,6 +528,7 @@ ifneq ($(GCC_TOOLCHAIN),)
 CLANG_FLAGS	+= --gcc-toolchain=$(GCC_TOOLCHAIN)
 endif
 CLANG_FLAGS	+= -no-integrated-as
+CLANG_FLAGS	+= -Werror=unknown-warning-option
 KBUILD_CFLAGS	+= $(CLANG_FLAGS)
 KBUILD_AFLAGS	+= $(CLANG_FLAGS)
 export CLANG_FLAGS
Signature · 1 line
2.20.1
author maintainer
#91 lore raw

PATCH 87/171 genksyms: Teach parser about 128-bit built-in types

In reply to Sasha Levin

From: Will Deacon <[email protected]>

[ Upstream commit a222061b85234d8a44486a46bd4df7e2cda52385 ]

__uint128_t crops up in a few files that export symbols to modules, so teach genksyms about it and the other GCC built-in 128-bit integer types so that we don't end up skipping the CRC generation for some symbols due to the parser failing to spot them:

  | WARNING: EXPORT symbol "kernel_neon_begin" [vmlinux] version
  |          generation failed, symbol will not be versioned.
  | ld: arch/arm64/kernel/fpsimd.o: relocation R_AARCH64_ABS32 against
  |     `__crc_kernel_neon_begin' can not be used when making a shared
  |     object
  | ld: arch/arm64/kernel/fpsimd.o:(.data+0x0): dangerous relocation:
  |     unsupported relocation
---
 scripts/genksyms/keywords.c | 4 ++++
 scripts/genksyms/parse.y    | 2 ++
 2 files changed, 6 insertions(+)
scripts/genksyms/keywords.c +4 -0
index e93336baaaed..c586d32dd2c3 100644
@@ -25,6 +25,10 @@ static struct resword {
 	{ "__volatile__", VOLATILE_KEYW },
 	{ "__builtin_va_list", VA_LIST_KEYW },
 
+	{ "__int128", BUILTIN_INT_KEYW },
+	{ "__int128_t", BUILTIN_INT_KEYW },
+	{ "__uint128_t", BUILTIN_INT_KEYW },
+
 	// According to rth, c99 defines "_Bool", __restrict", __restrict__", "restrict".  KAO
 	{ "_Bool", BOOL_KEYW },
 	{ "_restrict", RESTRICT_KEYW },
scripts/genksyms/parse.y +2 -0
index 00a6d7e54971..1ebcf52cd0f9 100644
@@ -76,6 +76,7 @@ static void record_compound(struct string_list **keyw,
 %token ATTRIBUTE_KEYW
 %token AUTO_KEYW
 %token BOOL_KEYW
+%token BUILTIN_INT_KEYW
 %token CHAR_KEYW
 %token CONST_KEYW
 %token DOUBLE_KEYW
@@ -263,6 +264,7 @@ simple_type_specifier:
 	| VOID_KEYW
 	| BOOL_KEYW
 	| VA_LIST_KEYW
+	| BUILTIN_INT_KEYW
 	| TYPE			{ (*$1)->tag = SYM_TYPEDEF; $$ = $1; }
 	;
 
Signature · 1 line
2.20.1
author maintainer
#92 lore raw

PATCH 88/171 phy: meson-g12a-usb3-pcie: disable locking for cr_regmap

In reply to Sasha Levin

From: Neil Armstrong <[email protected]>

[ Upstream commit 5fc2aa3ec9efad97dd7c316f3c8e4c6268bbed9b ]

Locking is not needed for the phy_g12a_usb3_pcie_cr_bus_read/write() and currently it causes the following BUG because of the usage of the regmap_read_poll_timeout() running in spinlock_irq, configured by regmap fast_io.

Simply disable locking in the cr_regmap config since it's only used from the PHY init callback function.

BUG: sleeping function called from invalid context at drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c:85
in_atomic(): 1, irqs_disabled(): 128, pid: 60, name: kworker/3:1
[snip]
Workqueue: events deferred_probe_work_func
Call trace:
 dump_backtrace+0x0/0x190
 show_stack+0x14/0x20
 dump_stack+0x90/0xb4
 ___might_sleep+0xec/0x110
 __might_sleep+0x50/0x88
 phy_g12a_usb3_pcie_cr_bus_addr.isra.0+0x80/0x1a8
 phy_g12a_usb3_pcie_cr_bus_read+0x34/0x1d8
 _regmap_read+0x60/0xe0
 _regmap_update_bits+0xc4/0x110
 regmap_update_bits_base+0x60/0x90
 phy_g12a_usb3_pcie_init+0xdc/0x210
 phy_init+0x74/0xd0
 dwc3_meson_g12a_probe+0x2cc/0x4d0
 platform_drv_probe+0x50/0xa0
 really_probe+0x20c/0x3b8
 driver_probe_device+0x68/0x150
 __device_attach_driver+0xa8/0x170
 bus_for_each_drv+0x64/0xc8
 __device_attach+0xd8/0x158
 device_initial_probe+0x10/0x18
 bus_probe_device+0x90/0x98
 deferred_probe_work_func+0x94/0xe8
 process_one_work+0x1e0/0x338
 worker_thread+0x230/0x458
 kthread+0x134/0x138
 ret_from_fork+0x10/0x1c
Fixes 36077e16c050 ("phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver")
---
 drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c +1 -1
index 6233a7979a93..ac322d643c7a 100644
@@ -188,7 +188,7 @@ static const struct regmap_config phy_g12a_usb3_pcie_cr_regmap_conf = {
 	.reg_read = phy_g12a_usb3_pcie_cr_bus_read,
 	.reg_write = phy_g12a_usb3_pcie_cr_bus_write,
 	.max_register = 0xffff,
-	.fast_io = true,
+	.disable_locking = true,
 };
 
 static int phy_g12a_usb3_init(struct phy *phy)
Signature · 1 line
2.20.1
author maintainer
#94 lore raw

PATCH 90/171 iio: iio-utils: Fix possible incorrect mask calculation

In reply to Sasha Levin

From: Bastien Nocera <[email protected]>

[ Upstream commit 208a68c8393d6041a90862992222f3d7943d44d6 ]

On some machines, iio-sensor-proxy was returning all 0's for IIO sensor values. It turns out that the bits_used for this sensor is 32, which makes the mask calculation:

*mask = (1 << 32) - 1;

If the compiler interprets the 1 literals as 32-bit ints, it generates undefined behavior depending on compiler version and optimization level. On my system, it optimizes out the shift, so the mask value becomes

*mask = (1) - 1;

With a mask value of 0, iio-sensor-proxy will always return 0 for every axis.

Avoid incorrect 0 values caused by compiler optimization.

See original fix by Brett Dutro <[email protected]> in iio-sensor-proxy:
https://github.com/hadess/iio-sensor-proxy/commit/9615ceac7c134d838660e209726cd86aa2064fd3

---
 tools/iio/iio_utils.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
tools/iio/iio_utils.c +2 -2
index a22b6e8fad46..7399eb7f1378 100644
@@ -156,9 +156,9 @@ int iioutils_get_type(unsigned *is_signed, unsigned *bytes, unsigned *bits_used,
 			*be = (endianchar == 'b');
 			*bytes = padint / 8;
 			if (*bits_used == 64)
-				*mask = ~0;
+				*mask = ~(0ULL);
 			else
-				*mask = (1ULL << *bits_used) - 1;
+				*mask = (1ULL << *bits_used) - 1ULL;
 
 			*is_signed = (signchar == 's');
 			if (fclose(sysfsfp)) {
Signature · 1 line
2.20.1
author maintainer
#97 lore raw

PATCH 93/171 powerpc/xmon: Fix disabling tracing while in xmon

In reply to Sasha Levin

From: "Naveen N. Rao" <[email protected]>

[ Upstream commit aaf06665f7ea3ee9f9754e16c1a507a89f1de5b1 ]

Commit ed49f7fd6438d ("powerpc/xmon: Disable tracing when entering xmon") added code to disable recording trace entries while in xmon. The commit introduced a variable 'tracing_enabled' to record if tracing was enabled on xmon entry, and used this to conditionally enable tracing during exit from xmon.

However, we are not checking the value of 'fromipi' variable in xmon_core() when setting 'tracing_enabled'. Due to this, when secondary cpus enter xmon, they will see tracing as being disabled already and tracing won't be re-enabled on exit. Fix the same.

Fixes ed49f7fd6438d ("powerpc/xmon: Disable tracing when entering xmon")
---
 arch/powerpc/xmon/xmon.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
arch/powerpc/xmon/xmon.c +4 -2
index d0620d762a5a..4a721fd62406 100644
@@ -465,8 +465,10 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
 	local_irq_save(flags);
 	hard_irq_disable();
 
-	tracing_enabled = tracing_is_on();
-	tracing_off();
+	if (!fromipi) {
+		tracing_enabled = tracing_is_on();
+		tracing_off();
+	}
 
 	bp = in_breakpoint_table(regs->nip, &offset);
 	if (bp != NULL) {
Signature · 1 line
2.20.1
author maintainer
#99 lore raw

PATCH 95/171 fixdep: check return value of printf() and putchar()

In reply to Sasha Levin

From: Masahiro Yamada <[email protected]>

[ Upstream commit 6f9ac9f4427ec0470ccffbf852cfaf326677cc21 ]

When there is not enough space on your storage device, the build will fail with 'No space left on device' error message.

The reason is obvious from the message, so you will free up some disk space, then you will resume the build.

However, sometimes you may still see a mysterious error message:

unterminated call to function 'wildcard': missing ')'.

If you run out of the disk space, fixdep may end up with generating incomplete .*.cmd files.

For example, if the disk-full error occurs while fixdep is running print_dep(), the .*.cmd might be truncated like this:

   $(wildcard include/config/

When you run 'make' next time, this broken .*.cmd will be included, then Make will terminate parsing since it is a wrong syntax.

Once this happens, you need to run 'make clean' or delete the broken .*.cmd file manually.

Even if you do not see any error message, the .*.cmd files after any error could be potentially incomplete, and unreliable. You may miss the re-compilation due to missing header dependency.

If printf() cannot output the string for disk shortage or whatever reason, it returns a negative value, but currently fixdep does not check it at all. Consequently, fixdep *successfully* generates a broken .*.cmd file. Make never notices that since fixdep exits with 0, which means success.

Given the intended usage of fixdep, it must respect the return value of not only malloc(), but also printf() and putchar().

This seems a long-standing issue since the introduction of fixdep.

In old days, Kbuild tried to provide an extra safety by letting fixdep output to a temporary file and renaming it after everything is done:

  scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(dot-target).tmp;\
  rm -f $(depfile);                                                    \
  mv -f $(dot-target).tmp $(dot-target).cmd)

It was no help to avoid the current issue; fixdep successfully created a truncated tmp file, which would be renamed to a .*.cmd file.

This problem should be fixed by propagating the error status to the build system because:

[1] Since commit 9c2af1c7377a ("kbuild: add .DELETE_ON_ERROR special target"), Make will delete the target automatically on any failure in the recipe.

[2] Since commit 392885ee82d3 ("kbuild: let fixdep directly write to .*.cmd files"), .*.cmd file is included only when the corresponding target already exists.

---
 scripts/basic/fixdep.c | 51 +++++++++++++++++++++++++++++++++---------
 1 file changed, 41 insertions(+), 10 deletions(-)
scripts/basic/fixdep.c +41 -10
index facbd603adf6..9ba47b0a47b9 100644
@@ -99,6 +99,7 @@
 #include <unistd.h>
 #include <fcntl.h>
 #include <string.h>
+#include <stdarg.h>
 #include <stdlib.h>
 #include <stdio.h>
 #include <ctype.h>
@@ -109,6 +110,36 @@ static void usage(void)
 	exit(1);
 }
 
+/*
+ * In the intended usage of this program, the stdout is redirected to .*.cmd
+ * files. The return value of printf() and putchar() must be checked to catch
+ * any error, e.g. "No space left on device".
+ */
+static void xprintf(const char *format, ...)
+{
+	va_list ap;
+	int ret;
+
+	va_start(ap, format);
+	ret = vprintf(format, ap);
+	if (ret < 0) {
+		perror("fixdep");
+		exit(1);
+	}
+	va_end(ap);
+}
+
+static void xputchar(int c)
+{
+	int ret;
+
+	ret = putchar(c);
+	if (ret == EOF) {
+		perror("fixdep");
+		exit(1);
+	}
+}
+
 /*
  * Print out a dependency path from a symbol name
  */
@@ -116,7 +147,7 @@ static void print_dep(const char *m, int slen, const char *dir)
 {
 	int c, prev_c = '/', i;
 
-	printf("    $(wildcard %s/", dir);
+	xprintf("    $(wildcard %s/", dir);
 	for (i = 0; i < slen; i++) {
 		c = m[i];
 		if (c == '_')
@@ -124,10 +155,10 @@ static void print_dep(const char *m, int slen, const char *dir)
 		else
 			c = tolower(c);
 		if (c != '/' || prev_c != '/')
-			putchar(c);
+			xputchar(c);
 		prev_c = c;
 	}
-	printf(".h) \\\n");
+	xprintf(".h) \\\n");
 }
 
 struct item {
@@ -324,13 +355,13 @@ static void parse_dep_file(char *m, const char *target)
 				 */
 				if (!saw_any_target) {
 					saw_any_target = 1;
-					printf("source_%s := %s\n\n",
-					       target, m);
-					printf("deps_%s := \\\n", target);
+					xprintf("source_%s := %s\n\n",
+						target, m);
+					xprintf("deps_%s := \\\n", target);
 				}
 				is_first_dep = 0;
 			} else {
-				printf("  %s \\\n", m);
+				xprintf("  %s \\\n", m);
 			}
 
 			buf = read_file(m);
@@ -353,8 +384,8 @@ static void parse_dep_file(char *m, const char *target)
 		exit(1);
 	}
 
-	printf("\n%s: $(deps_%s)\n\n", target, target);
-	printf("$(deps_%s):\n", target);
+	xprintf("\n%s: $(deps_%s)\n\n", target, target);
+	xprintf("$(deps_%s):\n", target);
 }
 
 int main(int argc, char *argv[])
@@ -369,7 +400,7 @@ int main(int argc, char *argv[])
 	target = argv[2];
 	cmdline = argv[3];
 
-	printf("cmd_%s := %s\n\n", target, cmdline);
+	xprintf("cmd_%s := %s\n\n", target, cmdline);
 
 	buf = read_file(depfile);
 	parse_dep_file(buf, target);
Signature · 1 line
2.20.1
author maintainer
#98 lore raw

PATCH 94/171 powerpc/rtas: retry when cpu offline races with suspend/migration

In reply to Sasha Levin

From: Nathan Lynch <[email protected]>

[ Upstream commit 9fb603050ffd94f8127df99c699cca2f575eb6a0 ]

The protocol for suspending or migrating an LPAR requires all present processor threads to enter H_JOIN. So if we have threads offline, we have to temporarily bring them up. This can race with administrator actions such as SMT state changes. As of dfd718a2ed1f ("powerpc/rtas:
Fix a potential race between CPU-Offline & Migration"), rtas_ibm_suspend_me() accounts for this, but errors out with -EBUSY for what almost certainly is a transient condition in any reasonable scenario.

Callers of rtas_ibm_suspend_me() already retry when -EAGAIN is returned, and it is typical during a migration for that to happen repeatedly for several minutes polling the H_VASI_STATE hcall result before proceeding to the next stage.

So return -EAGAIN instead of -EBUSY when this race is encountered. Additionally: logging this event is still appropriate but use pr_info instead of pr_err; and remove use of unlikely() while here as this is not a hot path at all.

Fixes dfd718a2ed1f ("powerpc/rtas: Fix a potential race between CPU-Offline & Migration")
---
 arch/powerpc/kernel/rtas.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
arch/powerpc/kernel/rtas.c +3 -4
index b824f4c69622..fff2eb22427d 100644
@@ -980,10 +980,9 @@ int rtas_ibm_suspend_me(u64 handle)
 	cpu_hotplug_disable();
 
 	/* Check if we raced with a CPU-Offline Operation */
-	if (unlikely(!cpumask_equal(cpu_present_mask, cpu_online_mask))) {
-		pr_err("%s: Raced against a concurrent CPU-Offline\n",
-		       __func__);
-		atomic_set(&data.error, -EBUSY);
+	if (!cpumask_equal(cpu_present_mask, cpu_online_mask)) {
+		pr_info("%s: Raced against a concurrent CPU-Offline\n", __func__);
+		atomic_set(&data.error, -EAGAIN);
 		goto out_hotplug_enable;
 	}
 
Signature · 1 line
2.20.1
author maintainer
#102 lore raw

PATCH 98/171 mfd: madera: Add missing of table registration

In reply to Sasha Levin

From: Daniel Gomez <[email protected]>

[ Upstream commit 5aa3709c0a5c026735b0ddd4ec80810a23d65f5b ]

MODULE_DEVICE_TABLE(of, <of_match_table>) should be called to complete DT OF mathing mechanism and register it.

Before this patch:
modinfo ./drivers/mfd/madera.ko | grep alias

After this patch:
modinfo ./drivers/mfd/madera.ko | grep alias

alias:          of:N*T*Ccirrus,wm1840C*
alias:          of:N*T*Ccirrus,wm1840
alias:          of:N*T*Ccirrus,cs47l91C*
alias:          of:N*T*Ccirrus,cs47l91
alias:          of:N*T*Ccirrus,cs47l90C*
alias:          of:N*T*Ccirrus,cs47l90
alias:          of:N*T*Ccirrus,cs47l85C*
alias:          of:N*T*Ccirrus,cs47l85
alias:          of:N*T*Ccirrus,cs47l35C*
alias:          of:N*T*Ccirrus,cs47l35
---
 drivers/mfd/madera-core.c | 1 +
 1 file changed, 1 insertion(+)
drivers/mfd/madera-core.c +1 -0
index 2a77988d0462..826b971ccb86 100644
@@ -286,6 +286,7 @@ const struct of_device_id madera_of_match[] = {
 	{ .compatible = "cirrus,wm1840", .data = (void *)WM1840 },
 	{}
 };
+MODULE_DEVICE_TABLE(of, madera_of_match);
 EXPORT_SYMBOL_GPL(madera_of_match);
 
 static int madera_get_reset_gpio(struct madera *madera)
Signature · 1 line
2.20.1
author maintainer
#106 lore raw

PATCH 102/171 mm/swap: fix release_pages() when releasing devmap pages

In reply to Sasha Levin

From: Ira Weiny <[email protected]>

[ Upstream commit c5d6c45e90c49150670346967971e14576afd7f1 ]

release_pages() is an optimized version of a loop around put_page(). Unfortunately for devmap pages the logic is not entirely correct in release_pages(). This is because device pages can be more than type MEMORY_DEVICE_PUBLIC. There are in fact 4 types, private, public, FS DAX, and PCI P2PDMA. Some of these have specific needs to "put" the page while others do not.

This logic to handle any special needs is contained in put_devmap_managed_page(). Therefore all devmap pages should be processed by this function where we can contain the correct logic for a page put.

Handle all device type pages within release_pages() by calling put_devmap_managed_page() on all devmap pages. If put_devmap_managed_page() returns true the page has been put and we continue with the next page. A false return of put_devmap_managed_page() means the page did not require special processing and should fall to "normal" processing.

This was found via code inspection while determining if release_pages() and the new put_user_pages() could be interchangeable.[1]

[1] https://lkml.kernel.org/r/[email protected]

---
 mm/swap.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
mm/swap.c +9 -4
index 7ede3eddc12a..607c48229a1d 100644
@@ -740,15 +740,20 @@ void release_pages(struct page **pages, int nr)
 		if (is_huge_zero_page(page))
 			continue;
 
-		/* Device public page can not be huge page */
-		if (is_device_public_page(page)) {
+		if (is_zone_device_page(page)) {
 			if (locked_pgdat) {
 				spin_unlock_irqrestore(&locked_pgdat->lru_lock,
 						       flags);
 				locked_pgdat = NULL;
 			}
-			put_devmap_managed_page(page);
-			continue;
+			/*
+			 * ZONE_DEVICE pages that return 'false' from
+			 * put_devmap_managed_page() do not require special
+			 * processing, and instead, expect a call to
+			 * put_page_testzero().
+			 */
+			if (put_devmap_managed_page(page))
+				continue;
 		}
 
 		page = compound_head(page);
Signature · 1 line
2.20.1
author maintainer
#107 lore raw

PATCH 103/171 um: Silence lockdep complaint about mmap_sem

In reply to Sasha Levin

From: Johannes Berg <[email protected]>

[ Upstream commit 80bf6ceaf9310b3f61934c69b382d4912deee049 ]

When we get into activate_mm(), lockdep complains that we're doing something strange:

    WARNING: possible circular locking dependency detected
    5.1.0-10252-gb00152307319-dirty #121 Not tainted
    ------------------------------------------------------
    inside.sh/366 is trying to acquire lock:
    (____ptrval____) (&(&p->alloc_lock)->rlock){+.+.}, at: flush_old_exec+0x703/0x8d7

    but task is already holding lock:
    (____ptrval____) (&mm->mmap_sem){++++}, at: flush_old_exec+0x6c5/0x8d7

    which lock already depends on the new lock.

    the existing dependency chain (in reverse order) is:

    -> #1 (&mm->mmap_sem){++++}:
           [...]
           __lock_acquire+0x12ab/0x139f
           lock_acquire+0x155/0x18e
           down_write+0x3f/0x98
           flush_old_exec+0x748/0x8d7
           load_elf_binary+0x2ca/0xddb
           [...]

    -> #0 (&(&p->alloc_lock)->rlock){+.+.}:
           [...]
           __lock_acquire+0x12ab/0x139f
           lock_acquire+0x155/0x18e
           _raw_spin_lock+0x30/0x83
           flush_old_exec+0x703/0x8d7
           load_elf_binary+0x2ca/0xddb
           [...]

    other info that might help us debug this:

     Possible unsafe locking scenario:

           CPU0                    CPU1
           ----                    ----
      lock(&mm->mmap_sem);
                                   lock(&(&p->alloc_lock)->rlock);
                                   lock(&mm->mmap_sem);
      lock(&(&p->alloc_lock)->rlock);

     *** DEADLOCK ***

    2 locks held by inside.sh/366:
     #0: (____ptrval____) (&sig->cred_guard_mutex){+.+.}, at: __do_execve_file+0x12d/0x869
     #1: (____ptrval____) (&mm->mmap_sem){++++}, at: flush_old_exec+0x6c5/0x8d7

    stack backtrace:
    CPU: 0 PID: 366 Comm: inside.sh Not tainted 5.1.0-10252-gb00152307319-dirty #121
    Stack:
     [...]
    Call Trace:
     [<600420de>] show_stack+0x13b/0x155
     [<6048906b>] dump_stack+0x2a/0x2c
     [<6009ae64>] print_circular_bug+0x332/0x343
     [<6009c5c6>] check_prev_add+0x669/0xdad
     [<600a06b4>] __lock_acquire+0x12ab/0x139f
     [<6009f3d0>] lock_acquire+0x155/0x18e
     [<604a07e0>] _raw_spin_lock+0x30/0x83
     [<60151e6a>] flush_old_exec+0x703/0x8d7
     [<601a8eb8>] load_elf_binary+0x2ca/0xddb
     [...]

I think it's because in exec_mmap() we have

	down_read(&old_mm->mmap_sem);
...
        task_lock(tsk);
...
	activate_mm(active_mm, mm);
	(which does down_write(&mm->mmap_sem))

I'm not really sure why lockdep throws in the whole knowledge about the task lock, but it seems that old_mm and mm shouldn't ever be the same (and it doesn't deadlock) so tell lockdep that they're different.

---
 arch/um/include/asm/mmu_context.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/um/include/asm/mmu_context.h +1 -1
index 9f4b4bb78120..00cefd33afdd 100644
@@ -52,7 +52,7 @@ static inline void activate_mm(struct mm_struct *old, struct mm_struct *new)
 	 * when the new ->mm is used for the first time.
 	 */
 	__switch_mm(&new->context.id);
-	down_write(&new->mmap_sem);
+	down_write_nested(&new->mmap_sem, 1);
 	uml_setup_stubs(new);
 	up_write(&new->mmap_sem);
 }
Signature · 7 lines
2.20.1


_______________________________________________
linux-um mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-um
author maintainer
#109 lore raw

PATCH 105/171 powerpc: silence a -Wcast-function-type warning in dawr_write_file_bool

In reply to Sasha Levin

From: Mathieu Malaterre <[email protected]>

[ Upstream commit 548c54acba5bd1388d50727a9a126a42d0cd4ad0 ]

In commit c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option") the following piece of code was added:

   smp_call_function((smp_call_func_t)set_dawr, &null_brk, 0);

Since GCC 8 this triggers the following warning about incompatible function types:

arch/powerpc/kernel/hw_breakpoint.c:408:21: error: cast between incompatible function types from 'int (*)(struct arch_hw_breakpoint *)' to 'void (*)(void *)' [-Werror=cast-function-type]

Since the warning is there for a reason, and should not be hidden behind a cast, provide an intermediate callback function to avoid the warning.

Fixes c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option")
---
 arch/powerpc/kernel/hw_breakpoint.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
arch/powerpc/kernel/hw_breakpoint.c +6 -1
index a293a53b4365..50262597c222 100644
@@ -370,6 +370,11 @@ void hw_breakpoint_pmu_read(struct perf_event *bp)
 bool dawr_force_enable;
 EXPORT_SYMBOL_GPL(dawr_force_enable);
 
+static void set_dawr_cb(void *info)
+{
+	set_dawr(info);
+}
+
 static ssize_t dawr_write_file_bool(struct file *file,
 				    const char __user *user_buf,
 				    size_t count, loff_t *ppos)
@@ -389,7 +394,7 @@ static ssize_t dawr_write_file_bool(struct file *file,
 
 	/* If we are clearing, make sure all CPUs have the DAWR cleared */
 	if (!dawr_force_enable)
-		smp_call_function((smp_call_func_t)set_dawr, &null_brk, 0);
+		smp_call_function(set_dawr_cb, &null_brk, 0);
 
 	return rc;
 }
Signature · 1 line
2.20.1
author maintainer
#108 lore raw

PATCH 104/171 f2fs: fix is_idle() check for discard type

In reply to Sasha Levin

From: Sahitya Tummala <[email protected]>

[ Upstream commit 56659ce838456c6f2315ce8a4bd686ac4b23e9d1 ]

The discard thread should issue upto dpolicy->max_requests at once and wait for all those discard requests at once it reaches dpolicy->max_requests. It should then sleep for dpolicy->min_interval timeout before issuing the next batch of discard requests. But in the current code of is_idle(), it checks for dcc_info->queued_discard and aborts issuing the discard batch of max_requests. This dcc_info->queued_discard will be true always once one discard command is issued.

It is thus resulting into this type of discard request pattern -

- Issue discard request#1
- is_idle() returns false, discard thread waits for request#1 and then sleeps for min_interval 50ms.
- Issue discard request#2
- is_idle() returns false, discard thread waits for request#2 and then sleeps for min_interval 50ms.
- and so on for all other discard requests, assuming f2fs is idle w.r.t other conditions.

With this fix, the pattern will look like this -

- Issue discard request#1
- Issue discard request#2
and so on upto max_requests of 8
- Issue discard request#8
- wait for min_interval 50ms.

---
 fs/f2fs/f2fs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/f2fs/f2fs.h +1 -1
index 9e6721e15b24..cbdc2f88a98c 100644
@@ -2204,7 +2204,7 @@ static inline bool is_idle(struct f2fs_sb_info *sbi, int type)
 		get_pages(sbi, F2FS_DIO_WRITE))
 		return false;
 
-	if (SM_I(sbi) && SM_I(sbi)->dcc_info &&
+	if (type != DISCARD_TIME && SM_I(sbi) && SM_I(sbi)->dcc_info &&
 			atomic_read(&SM_I(sbi)->dcc_info->queued_discard))
 		return false;
 
Signature · 8 lines
2.20.1



_______________________________________________
Linux-f2fs-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
author maintainer
#110 lore raw

PATCH 106/171 powerpc/4xx/uic: clear pending interrupt after irq type/pol change

In reply to Sasha Levin

From: Christian Lamparter <[email protected]>

[ Upstream commit 3ab3a0689e74e6aa5b41360bc18861040ddef5b1 ]

When testing out gpio-keys with a button, a spurious interrupt (and therefore a key press or release event) gets triggered as soon as the driver enables the irq line for the first time.

This patch clears any potential bogus generated interrupt that was caused by the switching of the associated irq's type and polarity.

---
 arch/powerpc/platforms/4xx/uic.c | 1 +
 1 file changed, 1 insertion(+)
arch/powerpc/platforms/4xx/uic.c +1 -0
index 31f12ad37a98..36fb66ce54cf 100644
@@ -154,6 +154,7 @@ static int uic_set_irq_type(struct irq_data *d, unsigned int flow_type)
 
 	mtdcr(uic->dcrbase + UIC_PR, pr);
 	mtdcr(uic->dcrbase + UIC_TR, tr);
+	mtdcr(uic->dcrbase + UIC_SR, ~mask);
 
 	raw_spin_unlock_irqrestore(&uic->lock, flags);
 
Signature · 1 line
2.20.1
author maintainer
#118 lore raw

PATCH 114/171 arm64: assembler: Switch ESB-instruction with a vanilla nop if !ARM64_HAS_RAS

In reply to Sasha Levin

From: James Morse <[email protected]>

[ Upstream commit 2b68a2a963a157f024c67c0697b16f5f792c8a35 ]

The ESB-instruction is a nop on CPUs that don't implement the RAS extensions. This lets us use it in places like the vectors without having to use alternatives.

If someone disables CONFIG_ARM64_RAS_EXTN, this instruction still has its RAS extensions behaviour, but we no longer read DISR_EL1 as this register does depend on alternatives.

This could go wrong if we want to synchronize an SError from a KVM guest. On a CPU that has the RAS extensions, but the KConfig option was disabled, we consume the pending SError with no chance of ever reading it.

Hide the ESB-instruction behind the CONFIG_ARM64_RAS_EXTN option, outputting a regular nop if the feature has been disabled.

---
 arch/arm64/include/asm/assembler.h | 4 ++++
 1 file changed, 4 insertions(+)
arch/arm64/include/asm/assembler.h +4 -0
index 570d195a184d..e3a15c751b13 100644
@@ -96,7 +96,11 @@
  * RAS Error Synchronization barrier
  */
 	.macro  esb
+#ifdef CONFIG_ARM64_RAS_EXTN
 	hint    #16
+#else
+	nop
+#endif
 	.endm
 
 /*
Signature · 1 line
2.20.1
author maintainer
#115 lore raw

PATCH 111/171 IB/mlx5: Fixed reporting counters on 2nd port for Dual port RoCE

In reply to Sasha Levin

From: Parav Pandit <[email protected]>

[ Upstream commit 2f40cf30c8644360d37287861d5288f00eab35e5 ]

Currently during dual port IB device registration in below code flow,

ib_register_device()
ib_device_register_sysfs()

    ib_setup_port_attrs()
      add_port()
        get_counter_table()
          get_perf_mad()
            process_mad()
              mlx5_ib_process_mad()

mlx5_ib_process_mad() fails on 2nd port when both the ports are not fully setup at the device level (because 2nd port is unaffiliated).

As a result, get_perf_mad() registers different PMA counter group for 1st and 2nd port, namely pma_counter_ext and pma_counter. However both ports have the same capability and counter offsets.

Due to this when counters are read by the user via sysfs in below code flow, counters are queried from wrong location from the device mainly from PPCNT instead of VPORT counters.

show_pma_counter()
get_perf_mad()

    process_mad()
      mlx5_ib_process_mad()
        process_pma_cmd()

This shows all zero counters for 2nd port.

To overcome this, process_pma_cmd() is invoked, and when unaffiliated port is not yet setup during device registration phase, make the query on the first port. while at it, only process_pma_cmd() needs to work on the native port number and underlying mdev, so shift the get, put calls to where its needed inside process_pma_cmd().

Fixes 212f2a87b74f ("IB/mlx5: Route MADs for dual port RoCE")
---
 drivers/infiniband/hw/mlx5/mad.c | 60 +++++++++++++++++++-------------
 1 file changed, 36 insertions(+), 24 deletions(-)
drivers/infiniband/hw/mlx5/mad.c +36 -24
index 6c529e6f3a01..348c1df69cdc 100644
@@ -200,19 +200,33 @@ static void pma_cnt_assign(struct ib_pma_portcounters *pma_cnt,
 			     vl_15_dropped);
 }
 
-static int process_pma_cmd(struct mlx5_core_dev *mdev, u8 port_num,
+static int process_pma_cmd(struct mlx5_ib_dev *dev, u8 port_num,
 			   const struct ib_mad *in_mad, struct ib_mad *out_mad)
 {
-	int err;
+	struct mlx5_core_dev *mdev;
+	bool native_port = true;
+	u8 mdev_port_num;
 	void *out_cnt;
+	int err;
 
+	mdev = mlx5_ib_get_native_port_mdev(dev, port_num, &mdev_port_num);
+	if (!mdev) {
+		/* Fail to get the native port, likely due to 2nd port is still
+		 * unaffiliated. In such case default to 1st port and attached
+		 * PF device.
+		 */
+		native_port = false;
+		mdev = dev->mdev;
+		mdev_port_num = 1;
+	}
 	/* Declaring support of extended counters */
 	if (in_mad->mad_hdr.attr_id == IB_PMA_CLASS_PORT_INFO) {
 		struct ib_class_port_info cpi = {};
 
 		cpi.capability_mask = IB_PMA_CLASS_CAP_EXT_WIDTH;
 		memcpy((out_mad->data + 40), &cpi, sizeof(cpi));
-		return IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_REPLY;
+		err = IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_REPLY;
+		goto done;
 	}
 
 	if (in_mad->mad_hdr.attr_id == IB_PMA_PORT_COUNTERS_EXT) {
@@ -221,11 +235,13 @@ static int process_pma_cmd(struct mlx5_core_dev *mdev, u8 port_num,
 		int sz = MLX5_ST_SZ_BYTES(query_vport_counter_out);
 
 		out_cnt = kvzalloc(sz, GFP_KERNEL);
-		if (!out_cnt)
-			return IB_MAD_RESULT_FAILURE;
+		if (!out_cnt) {
+			err = IB_MAD_RESULT_FAILURE;
+			goto done;
+		}
 
 		err = mlx5_core_query_vport_counter(mdev, 0, 0,
-						    port_num, out_cnt, sz);
+						    mdev_port_num, out_cnt, sz);
 		if (!err)
 			pma_cnt_ext_assign(pma_cnt_ext, out_cnt);
 	} else {
@@ -234,20 +250,23 @@ static int process_pma_cmd(struct mlx5_core_dev *mdev, u8 port_num,
 		int sz = MLX5_ST_SZ_BYTES(ppcnt_reg);
 
 		out_cnt = kvzalloc(sz, GFP_KERNEL);
-		if (!out_cnt)
-			return IB_MAD_RESULT_FAILURE;
+		if (!out_cnt) {
+			err = IB_MAD_RESULT_FAILURE;
+			goto done;
+		}
 
-		err = mlx5_core_query_ib_ppcnt(mdev, port_num,
+		err = mlx5_core_query_ib_ppcnt(mdev, mdev_port_num,
 					       out_cnt, sz);
 		if (!err)
 			pma_cnt_assign(pma_cnt, out_cnt);
-		}
-
+	}
 	kvfree(out_cnt);
-	if (err)
-		return IB_MAD_RESULT_FAILURE;
-
-	return IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_REPLY;
+	err = err ? IB_MAD_RESULT_FAILURE :
+		    IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_REPLY;
+done:
+	if (native_port)
+		mlx5_ib_put_native_port_mdev(dev, port_num);
+	return err;
 }
 
 int mlx5_ib_process_mad(struct ib_device *ibdev, int mad_flags, u8 port_num,
@@ -259,8 +278,6 @@ int mlx5_ib_process_mad(struct ib_device *ibdev, int mad_flags, u8 port_num,
 	struct mlx5_ib_dev *dev = to_mdev(ibdev);
 	const struct ib_mad *in_mad = (const struct ib_mad *)in;
 	struct ib_mad *out_mad = (struct ib_mad *)out;
-	struct mlx5_core_dev *mdev;
-	u8 mdev_port_num;
 	int ret;
 
 	if (WARN_ON_ONCE(in_mad_size != sizeof(*in_mad) ||
@@ -269,19 +286,14 @@ int mlx5_ib_process_mad(struct ib_device *ibdev, int mad_flags, u8 port_num,
 
 	memset(out_mad->data, 0, sizeof(out_mad->data));
 
-	mdev = mlx5_ib_get_native_port_mdev(dev, port_num, &mdev_port_num);
-	if (!mdev)
-		return IB_MAD_RESULT_FAILURE;
-
-	if (MLX5_CAP_GEN(mdev, vport_counters) &&
+	if (MLX5_CAP_GEN(dev->mdev, vport_counters) &&
 	    in_mad->mad_hdr.mgmt_class == IB_MGMT_CLASS_PERF_MGMT &&
 	    in_mad->mad_hdr.method == IB_MGMT_METHOD_GET) {
-		ret = process_pma_cmd(mdev, mdev_port_num, in_mad, out_mad);
+		ret = process_pma_cmd(dev, port_num, in_mad, out_mad);
 	} else {
 		ret =  process_mad(ibdev, mad_flags, port_num, in_wc, in_grh,
 				   in_mad, out_mad);
 	}
-	mlx5_ib_put_native_port_mdev(dev, port_num);
 	return ret;
 }
 
Signature · 1 line
2.20.1
author maintainer
#122 lore raw

PATCH 118/171 PCI: mobiveil: Fix the Class Code field

In reply to Sasha Levin

From: Hou Zhiqiang <[email protected]>

[ Upstream commit 0122af0a08243f344a438f924e5c2486486555b3 ]

Fix up the Class Code field in PCI configuration space and set it to PCI_CLASS_BRIDGE_PCI.

Move the Class Code fixup to function mobiveil_host_init() where it belongs.

Fixes 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver")
---
 drivers/pci/controller/pcie-mobiveil.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/pci/controller/pcie-mobiveil.c +6 -3
index 03d697b63e2a..88e9b70081fc 100644
@@ -558,6 +558,12 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
 		}
 	}
 
+	/* fixup for PCIe class register */
+	value = csr_readl(pcie, PAB_INTP_AXI_PIO_CLASS);
+	value &= 0xff;
+	value |= (PCI_CLASS_BRIDGE_PCI << 16);
+	csr_writel(pcie, value, PAB_INTP_AXI_PIO_CLASS);
+
 	/* setup MSI hardware registers */
 	mobiveil_pcie_enable_msi(pcie);
 
@@ -798,9 +804,6 @@ static int mobiveil_pcie_probe(struct platform_device *pdev)
 		goto error;
 	}
 
-	/* fixup for PCIe class register */
-	csr_writel(pcie, 0x060402ab, PAB_INTP_AXI_PIO_CLASS);
-
 	/* initialize the IRQ domains */
 	ret = mobiveil_pcie_init_irq_domain(pcie);
 	if (ret) {
Signature · 1 line
2.20.1
author maintainer
#126 lore raw

PATCH 122/171 perf test mmap-thread-lookup: Initialize variable to suppress memory sanitizer warning

In reply to Sasha Levin

From: Numfor Mbiziwo-Tiapo <[email protected]>

[ Upstream commit 4e4cf62b37da5ff45c904a3acf242ab29ed5881d ]

Running the 'perf test' command after building perf with a memory sanitizer causes a warning that says:

WARNING: MemorySanitizer: use-of-uninitialized-value... in mmap-thread-lookup.c

Initializing the go variable to 0 silences this harmless warning.

Committer warning:

This was harmless, just a simple test writing whatever was at that sizeof(int) memory area just to signal another thread blocked reading that file created with pipe(). Initialize it tho so that we don't get this warning.

---
 tools/perf/tests/mmap-thread-lookup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/tests/mmap-thread-lookup.c +1 -1
index ba87e6e8d18c..0a4301a5155c 100644
@@ -53,7 +53,7 @@ static void *thread_fn(void *arg)
 {
 	struct thread_data *td = arg;
 	ssize_t ret;
-	int go;
+	int go = 0;
 
 	if (thread_init(td))
 		return NULL;
Signature · 1 line
2.20.1
author maintainer
#125 lore raw

PATCH 121/171 PCI: mobiveil: Use the 1st inbound window for MEM inbound transactions

In reply to Sasha Levin

From: Hou Zhiqiang <[email protected]>

[ Upstream commit f7fee1b42fe4f8171a4b1cad05c61907c33c53f6 ]

The inbound and outbound windows have completely separate control registers sets in the host controller MMIO space. Windows control register are accessed through an MMIO base address and an offset that depends on the window index.

Since inbound and outbound windows control registers are completely separate there is no real need to use different window indexes in the inbound/outbound windows initialization routines to prevent clashing.

To fix this inconsistency, change the MEM inbound window index to 0, mirroring the outbound window set-up.

---
 drivers/pci/controller/pcie-mobiveil.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pci/controller/pcie-mobiveil.c +1 -1
index e4a1964e1b43..387a20f3c240 100644
@@ -546,7 +546,7 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
 			resource_size(pcie->ob_io_res));
 
 	/* memory inbound translation window */
-	program_ib_windows(pcie, WIN_NUM_1, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE);
+	program_ib_windows(pcie, WIN_NUM_0, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE);
 
 	/* Get the I/O and memory ranges from DT */
 	resource_list_for_each_entry_safe(win, tmp, &pcie->resources) {
Signature · 1 line
2.20.1
author maintainer
#127 lore raw

PATCH 123/171 perf stat: Fix use-after-freed pointer detected by the smatch tool

In reply to Sasha Levin

From: Leo Yan <[email protected]>

[ Upstream commit c74b05030edb3b52f4208d8415b8c933bc509a29 ]

Based on the following report from Smatch, fix the use-after-freed pointer.

tools/perf/builtin-stat.c:1353 add_default_attributes() warn: passing freed memory 'str'.

The pointer 'str' has been freed but later it is still passed into the function parse_events_print_error(). This patch fixes this use-after-freed issue.

Cc Adrian Hunter <[email protected]>
Cc Alexander Shishkin <[email protected]>
Cc Alexey Budankov <[email protected]>
Cc Alexios Zavras <[email protected]>
Cc Andi Kleen <[email protected]>
Cc Changbin Du <[email protected]>
Cc Davidlohr Bueso <[email protected]>
Cc David S. Miller <[email protected]>
Cc Eric Saint-Etienne <[email protected]>
Cc Jin Yao <[email protected]>
Cc Konstantin Khlebnikov <[email protected]>
Cc Mathieu Poirier <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Rasmus Villemoes <[email protected]>
Cc Song Liu <[email protected]>
Cc Suzuki Poulouse <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Thomas Richter <[email protected]>
---
 tools/perf/builtin-stat.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/builtin-stat.c +1 -1
index 1ae66f09dc7d..e28002d90573 100644
@@ -1276,8 +1276,8 @@ static int add_default_attributes(void)
 				fprintf(stderr,
 					"Cannot set up top down events %s: %d\n",
 					str, err);
-				free(str);
 				parse_events_print_error(&errinfo, str);
+				free(str);
 				return -1;
 			}
 		} else {
Signature · 7 lines
2.20.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author maintainer
#129 lore raw

PATCH 125/171 perf top: Fix potential NULL pointer dereference detected by the smatch tool

In reply to Sasha Levin

From: Leo Yan <[email protected]>

[ Upstream commit 111442cfc8abdeaa7ec1407f07ef7b3e5f76654e ]

Based on the following report from Smatch, fix the potential NULL pointer dereference check.

tools/perf/builtin-top.c:109
perf_top__parse_source() warn: variable dereferenced before check 'he' (see line 103)

tools/perf/builtin-top.c:233
perf_top__show_details() warn: variable dereferenced before check 'he' (see line 228)

  tools/perf/builtin-top.c
  101 static int perf_top__parse_source(struct perf_top *top, struct hist_entry *he)
  102 {
  103         struct perf_evsel *evsel = hists_to_evsel(he->hists);
                                                        ^^^^
  104         struct symbol *sym;
  105         struct annotation *notes;
  106         struct map *map;
  107         int err = -1;
  108
  109         if (!he || !he->ms.sym)
  110                 return -1;

This patch moves the values assignment after validating pointer 'he'.

Cc Adrian Hunter <[email protected]>
Cc Alexander Shishkin <[email protected]>
Cc Alexey Budankov <[email protected]>
Cc Alexios Zavras <[email protected]>
Cc Andi Kleen <[email protected]>
Cc Changbin Du <[email protected]>
Cc David S. Miller <[email protected]>
Cc Davidlohr Bueso <[email protected]>
Cc Eric Saint-Etienne <[email protected]>
Cc Jin Yao <[email protected]>
Cc Konstantin Khlebnikov <[email protected]>
Cc Mathieu Poirier <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Rasmus Villemoes <[email protected]>
Cc Song Liu <[email protected]>
Cc Suzuki Poulouse <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Thomas Richter <[email protected]>
---
 tools/perf/builtin-top.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
tools/perf/builtin-top.c +6 -2
index 466621cd1017..8a9ff4b11df0 100644
@@ -100,7 +100,7 @@ static void perf_top__resize(struct perf_top *top)
 
 static int perf_top__parse_source(struct perf_top *top, struct hist_entry *he)
 {
-	struct perf_evsel *evsel = hists_to_evsel(he->hists);
+	struct perf_evsel *evsel;
 	struct symbol *sym;
 	struct annotation *notes;
 	struct map *map;
@@ -109,6 +109,8 @@ static int perf_top__parse_source(struct perf_top *top, struct hist_entry *he)
 	if (!he || !he->ms.sym)
 		return -1;
 
+	evsel = hists_to_evsel(he->hists);
+
 	sym = he->ms.sym;
 	map = he->ms.map;
 
@@ -225,7 +227,7 @@ static void perf_top__record_precise_ip(struct perf_top *top,
 static void perf_top__show_details(struct perf_top *top)
 {
 	struct hist_entry *he = top->sym_filter_entry;
-	struct perf_evsel *evsel = hists_to_evsel(he->hists);
+	struct perf_evsel *evsel;
 	struct annotation *notes;
 	struct symbol *symbol;
 	int more;
@@ -233,6 +235,8 @@ static void perf_top__show_details(struct perf_top *top)
 	if (!he)
 		return;
 
+	evsel = hists_to_evsel(he->hists);
+
 	symbol = he->ms.sym;
 	notes = symbol__annotation(symbol);
 
Signature · 1 line
2.20.1
author maintainer
#131 lore raw

PATCH 127/171 perf session: Fix potential NULL pointer dereference found by the smatch tool

In reply to Sasha Levin

From: Leo Yan <[email protected]>

[ Upstream commit f3c8d90757724982e5f07cd77d315eb64ca145ac ]

Based on the following report from Smatch, fix the potential NULL pointer dereference check.

tools/perf/util/session.c:1252
dump_read() error: we previously assumed 'evsel' could be null (see line 1249)

  tools/perf/util/session.c
  1240 static void dump_read(struct perf_evsel *evsel, union perf_event *event)
  1241 {
  1242         struct read_event *read_event = &event->read;
  1243         u64 read_format;
  1244
  1245         if (!dump_trace)
  1246                 return;
  1247
  1248         printf(": %d %d %s %" PRIu64 "\n", event->read.pid, event->read.tid,
  1249                evsel ? perf_evsel__name(evsel) : "FAIL",
  1250                event->read.value);
  1251
  1252         read_format = evsel->attr.read_format;
                             ^^^^^^^

'evsel' could be NULL pointer, for this case this patch directly bails out without dumping read_event.

Cc Adrian Hunter <[email protected]>
Cc Alexander Shishkin <[email protected]>
Cc Alexey Budankov <[email protected]>
Cc Alexios Zavras <[email protected]>
Cc Andi Kleen <[email protected]>
Cc Changbin Du <[email protected]>
Cc David S. Miller <[email protected]>
Cc Davidlohr Bueso <[email protected]>
Cc Eric Saint-Etienne <[email protected]>
Cc Jin Yao <[email protected]>
Cc Konstantin Khlebnikov <[email protected]>
Cc Mathieu Poirier <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Rasmus Villemoes <[email protected]>
Cc Song Liu <[email protected]>
Cc Suzuki Poulouse <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Thomas Richter <[email protected]>
---
 tools/perf/util/session.c | 3 +++
 1 file changed, 3 insertions(+)
tools/perf/util/session.c +3 -0
index 54cf163347f7..2e61dd6a3574 100644
@@ -1249,6 +1249,9 @@ static void dump_read(struct perf_evsel *evsel, union perf_event *event)
 	       evsel ? perf_evsel__name(evsel) : "FAIL",
 	       event->read.value);
 
+	if (!evsel)
+		return;
+
 	read_format = evsel->attr.read_format;
 
 	if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED)
Signature · 1 line
2.20.1
author maintainer
#130 lore raw

PATCH 126/171 perf trace: Fix potential NULL pointer dereference found by the smatch tool

In reply to Sasha Levin

From: Leo Yan <[email protected]>

[ Upstream commit 7a6d49dc8cad8fa1f3d63994102af8f9ae9c859f ]

Based on the following report from Smatch, fix the potential NULL pointer dereference check.

tools/perf/builtin-trace.c:1044
thread_trace__new() error: we previously assumed 'ttrace' could be null (see line 1041).

  tools/perf/builtin-trace.c
  1037 static struct thread_trace *thread_trace__new(void)
  1038 {
  1039         struct thread_trace *ttrace =  zalloc(sizeof(struct thread_trace));
  1040
  1041         if (ttrace)
  1042                 ttrace->files.max = -1;
  1043
  1044         ttrace->syscall_stats = intlist__new(NULL);
               ^^^^^^^^
  1045
  1046         return ttrace;
  1047 }
Cc Adrian Hunter <[email protected]>
Cc Alexander Shishkin <[email protected]>
Cc Alexey Budankov <[email protected]>
Cc Alexios Zavras <[email protected]>
Cc Andi Kleen <[email protected]>
Cc Changbin Du <[email protected]>
Cc David S. Miller <[email protected]>
Cc Davidlohr Bueso <[email protected]>
Cc Eric Saint-Etienne <[email protected]>
Cc Jin Yao <[email protected]>
Cc Konstantin Khlebnikov <[email protected]>
Cc Mathieu Poirier <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Rasmus Villemoes <[email protected]>
Cc Song Liu <[email protected]>
Cc Suzuki Poulouse <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Thomas Richter <[email protected]>
[ Just made it look like other tools/perf constructors, same end result ]
---
 tools/perf/builtin-trace.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
tools/perf/builtin-trace.c +3 -3
index 52fadc858ef0..909e68545bb8 100644
@@ -997,10 +997,10 @@ static struct thread_trace *thread_trace__new(void)
 {
 	struct thread_trace *ttrace =  zalloc(sizeof(struct thread_trace));
 
-	if (ttrace)
+	if (ttrace) {
 		ttrace->files.max = -1;
-
-	ttrace->syscall_stats = intlist__new(NULL);
+		ttrace->syscall_stats = intlist__new(NULL);
+	}
 
 	return ttrace;
 }
Signature · 1 line
2.20.1
author maintainer
#132 lore raw

PATCH 128/171 perf map: Fix potential NULL pointer dereference found by smatch tool

In reply to Sasha Levin

From: Leo Yan <[email protected]>

[ Upstream commit 363bbaef63ffebcc745239fe80a953ebb5ac9ec9 ]

Based on the following report from Smatch, fix the potential NULL pointer dereference check.

tools/perf/util/map.c:479
map__fprintf_srccode() error: we previously assumed 'state' could be null (see line 466)

  tools/perf/util/map.c
  465         /* Avoid redundant printing */
  466         if (state &&
  467             state->srcfile &&
  468             !strcmp(state->srcfile, srcfile) &&
  469             state->line == line) {
  470                 free(srcfile);
  471                 return 0;
  472         }
  473
  474         srccode = find_sourceline(srcfile, line, &len);
  475         if (!srccode)
  476                 goto out_free_line;
  477
  478         ret = fprintf(fp, "|%-8d %.*s", line, len, srccode);
  479         state->srcfile = srcfile;
              ^^^^^^^
  480         state->line = line;
              ^^^^^^^

This patch validates 'state' pointer before access its elements.

Cc Adrian Hunter <[email protected]>
Cc Alexander Shishkin <[email protected]>
Cc Alexey Budankov <[email protected]>
Cc Alexios Zavras <[email protected]>
Cc Andi Kleen <[email protected]>
Cc Changbin Du <[email protected]>
Cc David S. Miller <[email protected]>
Cc Davidlohr Bueso <[email protected]>
Cc Eric Saint-Etienne <[email protected]>
Cc Jin Yao <[email protected]>
Cc Konstantin Khlebnikov <[email protected]>
Cc Mathieu Poirier <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Rasmus Villemoes <[email protected]>
Cc Song Liu <[email protected]>
Cc Suzuki Poulouse <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Thomas Richter <[email protected]>
Fixes dd2e18e9ac20 ("perf tools: Support 'srccode' output")
---
 tools/perf/util/map.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
tools/perf/util/map.c +5 -2
index ee71efb9db62..9c81ee092784 100644
@@ -470,8 +470,11 @@ int map__fprintf_srccode(struct map *map, u64 addr,
 		goto out_free_line;
 
 	ret = fprintf(fp, "|%-8d %.*s", line, len, srccode);
-	state->srcfile = srcfile;
-	state->line = line;
+
+	if (state) {
+		state->srcfile = srcfile;
+		state->line = line;
+	}
 	return ret;
 
 out_free_line:
Signature · 1 line
2.20.1
author maintainer
#133 lore raw

PATCH 129/171 perf annotate: Fix dereferencing freed memory found by the smatch tool

In reply to Sasha Levin

From: Leo Yan <[email protected]>

[ Upstream commit 600c787dbf6521d8d07ee717ab7606d5070103ea ]

Based on the following report from Smatch, fix the potential dereferencing freed memory check.

tools/perf/util/annotate.c:1125
disasm_line__parse() error: dereferencing freed memory 'namep'

  tools/perf/util/annotate.c
  1100 static int disasm_line__parse(char *line, const char **namep, char **rawp)
  1101 {
  1102         char tmp, *name = ltrim(line);

[...]

  1114         *namep = strdup(name);
  1115
  1116         if (*namep == NULL)
  1117                 goto out_free_name;

[...]

  1124 out_free_name:
  1125         free((void *)namep);
                            ^^^^^
  1126         *namep = NULL;
               ^^^^^^
  1127         return -1;
  1128 }

If strdup() fails to allocate memory space for *namep, we don't need to free memory with pointer 'namep', which is resident in data structure disasm_line::ins::name; and *namep is NULL pointer for this failure, so it's pointless to assign NULL to *namep again.

Committer note:

Freeing namep, which is the address of the first entry of the 'struct ins' that is the first member of struct disasm_line would in fact free that disasm_line instance, if it was allocated via malloc/calloc, which, later, would a dereference of freed memory.

Cc Adrian Hunter <[email protected]>
Cc Alexander Shishkin <[email protected]>
Cc Alexey Budankov <[email protected]>
Cc Alexios Zavras <[email protected]>
Cc Andi Kleen <[email protected]>
Cc Changbin Du <[email protected]>
Cc David S. Miller <[email protected]>
Cc Davidlohr Bueso <[email protected]>
Cc Eric Saint-Etienne <[email protected]>
Cc Jin Yao <[email protected]>
Cc Konstantin Khlebnikov <[email protected]>
Cc Mathieu Poirier <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Rasmus Villemoes <[email protected]>
Cc Song Liu <[email protected]>
Cc Suzuki Poulouse <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Thomas Richter <[email protected]>
---
 tools/perf/util/annotate.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
tools/perf/util/annotate.c +2 -4
index 79db038b56f2..02d0df0de3bb 100644
@@ -1114,16 +1114,14 @@ static int disasm_line__parse(char *line, const char **namep, char **rawp)
 	*namep = strdup(name);
 
 	if (*namep == NULL)
-		goto out_free_name;
+		goto out;
 
 	(*rawp)[0] = tmp;
 	*rawp = ltrim(*rawp);
 
 	return 0;
 
-out_free_name:
-	free((void *)namep);
-	*namep = NULL;
+out:
 	return -1;
 }
 
Signature · 1 line
2.20.1
author maintainer
#138 lore raw

PATCH 134/171 RDMA/core: Fix race when resolving IP address

In reply to Sasha Levin

From: Dag Moxnes <[email protected]>

[ Upstream commit d8d9ec7dc5abbb3f11d866e983c4984f5c2de9d6 ]

Use the neighbour lock when copying the MAC address from the neighbour data struct in dst_fetch_ha.

When not using the lock, it is possible for the function to race with neigh_update(), causing it to copy an torn MAC address:

rdma_resolve_addr()
rdma_resolve_ip()

    addr_resolve()
      addr_resolve_neigh()
        fetch_ha()
          dst_fetch_ha()
	     memcpy(dev_addr->dst_dev_addr, n->ha, MAX_ADDR_LEN)

and

net_ioctl()
arp_ioctl()

    arp_rec_delete()
      arp_invalidate()
        neigh_update()
          __neigh_update()
	    memcpy(&neigh->ha, lladdr, dev->addr_len)

It is possible to provoke this error by calling rdma_resolve_addr() in a tight loop, while deleting the corresponding ARP entry in another tight loop.

Fixes 51d45974515c ("infiniband: addr: Consolidate code to fetch neighbour hardware address from dst.")
---
 drivers/infiniband/core/addr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/core/addr.c +1 -1
index 2f7d14159841..9b76a8fcdd24 100644
@@ -337,7 +337,7 @@ static int dst_fetch_ha(const struct dst_entry *dst,
 		neigh_event_send(n, NULL);
 		ret = -ENODATA;
 	} else {
-		memcpy(dev_addr->dst_dev_addr, n->ha, MAX_ADDR_LEN);
+		neigh_ha_snapshot(dev_addr->dst_dev_addr, n, dst->dev);
 	}
 
 	neigh_release(n);
Signature · 1 line
2.20.1
author maintainer
#134 lore raw

PATCH 130/171 perf hists browser: Fix potential NULL pointer dereference found by the smatch tool

In reply to Sasha Levin

From: Leo Yan <[email protected]>

[ Upstream commit ceb75476db1617a88cc29b09839acacb69aa076e ]

Based on the following report from Smatch, fix the potential NULL pointer dereference check.

tools/perf/ui/browsers/hists.c:641 hist_browser__run() error: we previously assumed 'hbt' could be null (see line 625)

tools/perf/ui/browsers/hists.c:3088 perf_evsel__hists_browse() error: we previously assumed 'browser->he_selection' could be null (see line 2902)

tools/perf/ui/browsers/hists.c:3272 perf_evsel_menu__run() error: we previously assumed 'hbt' could be null (see line 3260)

This patch firstly validating the pointers before access them, so can fix potential NULL pointer dereference.

---
 tools/perf/ui/browsers/hists.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)
tools/perf/ui/browsers/hists.c +11 -4
index 3421ecbdd3f0..c1dd9b54dc6e 100644
@@ -638,7 +638,11 @@ int hist_browser__run(struct hist_browser *browser, const char *help,
 		switch (key) {
 		case K_TIMER: {
 			u64 nr_entries;
-			hbt->timer(hbt->arg);
+
+			WARN_ON_ONCE(!hbt);
+
+			if (hbt)
+				hbt->timer(hbt->arg);
 
 			if (hist_browser__has_filter(browser) ||
 			    symbol_conf.report_hierarchy)
@@ -2819,7 +2823,7 @@ static int perf_evsel__hists_browse(struct perf_evsel *evsel, int nr_events,
 {
 	struct hists *hists = evsel__hists(evsel);
 	struct hist_browser *browser = perf_evsel_browser__new(evsel, hbt, env, annotation_opts);
-	struct branch_info *bi;
+	struct branch_info *bi = NULL;
 #define MAX_OPTIONS  16
 	char *options[MAX_OPTIONS];
 	struct popup_action actions[MAX_OPTIONS];
@@ -3085,7 +3089,9 @@ static int perf_evsel__hists_browse(struct perf_evsel *evsel, int nr_events,
 			goto skip_annotation;
 
 		if (sort__mode == SORT_MODE__BRANCH) {
-			bi = browser->he_selection->branch_info;
+
+			if (browser->he_selection)
+				bi = browser->he_selection->branch_info;
 
 			if (bi == NULL)
 				goto skip_annotation;
@@ -3269,7 +3275,8 @@ static int perf_evsel_menu__run(struct perf_evsel_menu *menu,
 
 		switch (key) {
 		case K_TIMER:
-			hbt->timer(hbt->arg);
+			if (hbt)
+				hbt->timer(hbt->arg);
 
 			if (!menu->lost_events_warned &&
 			    menu->lost_events &&
Signature · 1 line
2.20.1
author maintainer
#144 lore raw

PATCH 140/171 powerpc/irq: Don't WARN continuously in arch_local_irq_restore()

In reply to Sasha Levin

From: Michael Ellerman <[email protected]>

[ Upstream commit 0fc12c022ad25532b66bf6f6c818ee1c1d63e702 ]

When CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is enabled (uncommon), we have a series of WARN_ON's in arch_local_irq_restore().

These are "should never happen" conditions, but if they do happen they can flood the console and render the system unusable. So switch them to WARN_ON_ONCE().

Fixes e2b36d591720 ("powerpc/64: Don't trace code that runs with the soft irq mask unreconciled")
Fixes 9b81c0211c24 ("powerpc/64s: make PACA_IRQ_HARD_DIS track MSR[EE] closely")
Fixes 7c0482e3d055 ("powerpc/irq: Fix another case of lazy IRQ state getting out of sync")
---
 arch/powerpc/kernel/irq.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/powerpc/kernel/irq.c +3 -3
index bc68c53af67c..5645bc9cbc09 100644
@@ -255,7 +255,7 @@ notrace void arch_local_irq_restore(unsigned long mask)
 	irq_happened = get_irq_happened();
 	if (!irq_happened) {
 #ifdef CONFIG_PPC_IRQ_SOFT_MASK_DEBUG
-		WARN_ON(!(mfmsr() & MSR_EE));
+		WARN_ON_ONCE(!(mfmsr() & MSR_EE));
 #endif
 		return;
 	}
@@ -268,7 +268,7 @@ notrace void arch_local_irq_restore(unsigned long mask)
 	 */
 	if (!(irq_happened & PACA_IRQ_HARD_DIS)) {
 #ifdef CONFIG_PPC_IRQ_SOFT_MASK_DEBUG
-		WARN_ON(!(mfmsr() & MSR_EE));
+		WARN_ON_ONCE(!(mfmsr() & MSR_EE));
 #endif
 		__hard_irq_disable();
 #ifdef CONFIG_PPC_IRQ_SOFT_MASK_DEBUG
@@ -279,7 +279,7 @@ notrace void arch_local_irq_restore(unsigned long mask)
 		 * warn if we are wrong. Only do that when IRQ tracing
 		 * is enabled as mfmsr() can be costly.
 		 */
-		if (WARN_ON(mfmsr() & MSR_EE))
+		if (WARN_ON_ONCE(mfmsr() & MSR_EE))
 			__hard_irq_disable();
 #endif
 	}
Signature · 1 line
2.20.1
author maintainer
#148 lore raw

PATCH 144/171 f2fs: fix to avoid long latency during umount

In reply to Sasha Levin

From: Heng Xiao <[email protected]>

[ Upstream commit 6e0cd4a9dd4df1a0afcb454f1e654b5c80685913 ]

In umount, we give an constand time to handle pending discard, previously, in __issue_discard_cmd() we missed to check timeout condition in loop, result in delaying long time, fix it.

[Chao Yu: add commit message]
---
 fs/f2fs/segment.c | 4 ++++
 1 file changed, 4 insertions(+)
fs/f2fs/segment.c +4 -0
index 8903b61457e7..291f7106537c 100644
@@ -1486,6 +1486,10 @@ static int __issue_discard_cmd(struct f2fs_sb_info *sbi,
 		list_for_each_entry_safe(dc, tmp, pend_list, list) {
 			f2fs_bug_on(sbi, dc->state != D_PREP);
 
+			if (dpolicy->timeout != 0 &&
+				f2fs_time_over(sbi, dpolicy->timeout))
+				break;
+
 			if (dpolicy->io_aware && i < dpolicy->io_aware_gran &&
 						!is_idle(sbi, DISCARD_TIME)) {
 				io_interrupted = true;
Signature · 1 line
2.20.1
author maintainer
#150 lore raw

PATCH 146/171 mailbox: handle failed named mailbox channel request

In reply to Sasha Levin

From: morten petersen <[email protected]>

[ Upstream commit 25777e5784a7b417967460d4fcf9660d05a0c320 ]

Previously, if mbox_request_channel_byname was used with a name which did not exist in the "mbox-names" property of a mailbox client, the mailbox corresponding to the last entry in the "mbox-names" list would be incorrectly selected.
With this patch, -EINVAL is returned if the named mailbox is not found.

---
 drivers/mailbox/mailbox.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/mailbox/mailbox.c +4 -2
index f4b1950d35f3..0b821a5b2db8 100644
@@ -418,11 +418,13 @@ struct mbox_chan *mbox_request_channel_byname(struct mbox_client *cl,
 
 	of_property_for_each_string(np, "mbox-names", prop, mbox_name) {
 		if (!strncmp(name, mbox_name, strlen(name)))
-			break;
+			return mbox_request_channel(cl, index);
 		index++;
 	}
 
-	return mbox_request_channel(cl, index);
+	dev_err(cl->dev, "%s() could not locate channel named \"%s\"\n",
+		__func__, name);
+	return ERR_PTR(-EINVAL);
 }
 EXPORT_SYMBOL_GPL(mbox_request_channel_byname);
 
Signature · 1 line
2.20.1
author maintainer
#153 lore raw

PATCH 149/171 s390/dasd: Make layout analysis ESE compatible

In reply to Sasha Levin

From: Jan Höppner <[email protected]>

[ Upstream commit ce6915f5343f5f2a2a937b683d8ffbf12dab3ad4 ]

The disk layout and volume information of a DASD reside in the first two tracks of cylinder 0. When a DASD is set online, currently the first three tracks are read and analysed to confirm an expected layout.

For CDL (Compatible Disk Layout) only count area data of the first track is evaluated and checked against expected key and data lengths. For LDL (Linux Disk Layout) the first and third track is evaluated. However, an LDL formatted volume is expected to be in the same format across all tracks. Checking the third track therefore doesn't have any more value than checking any other track at random.

Now, an Extent Space Efficient (ESE) DASD is initialised by only formatting the first two tracks, as those tracks always contain all information necessarry.

Checking the third track on an ESE volume will therefore most likely fail with a record not found error, as the third track will be empty. This in turn leads to the device being recognised with a volume size of
0. Attempts to write volume information on the first two tracks then fail with "no space left on device" errors.

Initialising the first three tracks for an ESE volume is not a viable solution, because the third track is already a regular track and could contain user data. With that there is potential for data corruption.

Instead, always only analyse the first two tracks, as it is sufficiant for both CDL and LDL, and allow ESE volumes to be recognised as well.

---
 drivers/s390/block/dasd_eckd.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/s390/block/dasd_eckd.c +6 -6
index c09039eea707..c7aec1b44b7c 100644
@@ -157,7 +157,7 @@ static const int sizes_trk0[] = { 28, 148, 84 };
 #define LABEL_SIZE 140
 
 /* head and record addresses of count_area read in analysis ccw */
-static const int count_area_head[] = { 0, 0, 0, 0, 2 };
+static const int count_area_head[] = { 0, 0, 0, 0, 1 };
 static const int count_area_rec[] = { 1, 2, 3, 4, 1 };
 
 static inline unsigned int
@@ -1823,8 +1823,8 @@ dasd_eckd_analysis_ccw(struct dasd_device *device)
 	if (IS_ERR(cqr))
 		return cqr;
 	ccw = cqr->cpaddr;
-	/* Define extent for the first 3 tracks. */
-	define_extent(ccw++, cqr->data, 0, 2,
+	/* Define extent for the first 2 tracks. */
+	define_extent(ccw++, cqr->data, 0, 1,
 		      DASD_ECKD_CCW_READ_COUNT, device, 0);
 	LO_data = cqr->data + sizeof(struct DE_eckd_data);
 	/* Locate record for the first 4 records on track 0. */
@@ -1843,9 +1843,9 @@ dasd_eckd_analysis_ccw(struct dasd_device *device)
 		count_data++;
 	}
 
-	/* Locate record for the first record on track 2. */
+	/* Locate record for the first record on track 1. */
 	ccw[-1].flags |= CCW_FLAG_CC;
-	locate_record(ccw++, LO_data++, 2, 0, 1,
+	locate_record(ccw++, LO_data++, 1, 0, 1,
 		      DASD_ECKD_CCW_READ_COUNT, device, 0);
 	/* Read count ccw. */
 	ccw[-1].flags |= CCW_FLAG_CC;
@@ -1967,7 +1967,7 @@ static int dasd_eckd_end_analysis(struct dasd_block *block)
 		}
 	}
 	if (i == 3)
-		count_area = &private->count_area[4];
+		count_area = &private->count_area[3];
 
 	if (private->uses_cdl == 0) {
 		for (i = 0; i < 5; i++) {
Signature · 1 line
2.20.1
author maintainer
#145 lore raw

PATCH 141/171 powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h

In reply to Sasha Levin

From: Masahiro Yamada <[email protected]>

[ Upstream commit 9e005b761e7ad153dcf40a6cba1d681fe0830ac6 ]

The next commit will make the way of passing CONFIG options more robust. Unfortunately, it would uncover another hidden issue; without this commit, skiroot_defconfig would be broken like this:

|   WRAP    arch/powerpc/boot/zImage.pseries
| arch/powerpc/boot/wrapper.a(decompress.o): In function `bcj_powerpc.isra.10':
| decompress.c:(.text+0x720): undefined reference to `get_unaligned_be32'
| decompress.c:(.text+0x7a8): undefined reference to `put_unaligned_be32'
| make[1]: *** [arch/powerpc/boot/Makefile;383: arch/powerpc/boot/zImage.pseries] Error 1
| make: *** [arch/powerpc/Makefile;295: zImage] Error 2

skiroot_defconfig is the only defconfig that enables CONFIG_KERNEL_XZ for ppc, which has never been correctly built before.

I figured out the root cause in lib/decompress_unxz.c:

| #ifdef CONFIG_PPC
| #      define XZ_DEC_POWERPC
| #endif

CONFIG_PPC is undefined here in the ppc bootwrapper because autoconf.h is not included except by arch/powerpc/boot/serial.c

XZ_DEC_POWERPC is not defined, therefore, bcj_powerpc() is not compiled for the bootwrapper.

With the next commit passing CONFIG_PPC correctly, we would realize that {get,put}_unaligned_be32 was missing.

Unlike the other decompressors, the ppc bootwrapper duplicates all the necessary helpers in arch/powerpc/boot/.

The other architectures define __KERNEL__ and pull in helpers for building the decompressors.

If ppc bootwrapper had defined __KERNEL__, lib/xz/xz_private.h would have included <asm/unaligned.h>:

| #ifdef __KERNEL__
| #       include <linux/xz.h>
| #       include <linux/kernel.h>
| #       include <asm/unaligned.h>

However, doing so would cause tons of definition conflicts since the bootwrapper has duplicated everything.

I just added copies of {get,put}_unaligned_be32, following the bootwrapper coding convention.

---
 arch/powerpc/boot/xz_config.h | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
arch/powerpc/boot/xz_config.h +20 -0
index e22e5b3770dd..ebfadd39e192 100644
@@ -20,10 +20,30 @@ static inline uint32_t swab32p(void *p)
 
 #ifdef __LITTLE_ENDIAN__
 #define get_le32(p) (*((uint32_t *) (p)))
+#define cpu_to_be32(x) swab32(x)
+static inline u32 be32_to_cpup(const u32 *p)
+{
+	return swab32p((u32 *)p);
+}
 #else
 #define get_le32(p) swab32p(p)
+#define cpu_to_be32(x) (x)
+static inline u32 be32_to_cpup(const u32 *p)
+{
+	return *p;
+}
 #endif
 
+static inline uint32_t get_unaligned_be32(const void *p)
+{
+	return be32_to_cpup(p);
+}
+
+static inline void put_unaligned_be32(u32 val, void *p)
+{
+	*((u32 *)p) = cpu_to_be32(val);
+}
+
 #define memeq(a, b, size) (memcmp(a, b, size) == 0)
 #define memzero(buf, size) memset(buf, 0, size)
 
Signature · 1 line
2.20.1
author maintainer
#149 lore raw

PATCH 145/171 f2fs: avoid out-of-range memory access

In reply to Sasha Levin

From: Ocean Chen <[email protected]>

[ Upstream commit 56f3ce675103e3fb9e631cfb4131fc768bc23e9a ]

blkoff_off might over 512 due to fs corrupt or security vulnerability. That should be checked before being using.

Use ENTRIES_IN_SUM to protect invalid value in cur_data_blkoff.

---
 fs/f2fs/segment.c | 5 +++++
 1 file changed, 5 insertions(+)
fs/f2fs/segment.c +5 -0
index 291f7106537c..ce15fbcd7cff 100644
@@ -3403,6 +3403,11 @@ static int read_compacted_summaries(struct f2fs_sb_info *sbi)
 		seg_i = CURSEG_I(sbi, i);
 		segno = le32_to_cpu(ckpt->cur_data_segno[i]);
 		blk_off = le16_to_cpu(ckpt->cur_data_blkoff[i]);
+		if (blk_off > ENTRIES_IN_SUM) {
+			f2fs_bug_on(sbi, 1);
+			f2fs_put_page(page, 1);
+			return -EFAULT;
+		}
 		seg_i->next_segno = segno;
 		reset_curseg(sbi, i, 0);
 		seg_i->alloc_type = ckpt->alloc_type[i];
Signature · 8 lines
2.20.1



_______________________________________________
Linux-f2fs-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
author maintainer
#146 lore raw

PATCH 142/171 block: init flush rq ref count to 1

In reply to Sasha Levin

From: Josef Bacik <[email protected]>

[ Upstream commit b554db147feea39617b533ab6bca247c91c6198a ]

We discovered a problem in newer kernels where a disconnect of a NBD device while the flush request was pending would result in a hang. This is because the blk mq timeout handler does

        if (!refcount_inc_not_zero(&rq->ref))
                return true;

to determine if it's ok to run the timeout handler for the request. Flush_rq's don't have a ref count set, so we'd skip running the timeout handler for this request and it would just sit there in limbo forever.

Fix this by always setting the refcount of any request going through blk_init_rq() to 1. I tested this with a nbd-server that dropped flush requests to verify that it hung, and then tested with this patch to verify I got the timeout as expected and the error handling kicked in. Thanks,

---
 block/blk-core.c | 1 +
 1 file changed, 1 insertion(+)
block/blk-core.c +1 -0
index 8340f69670d8..5183fca0818a 100644
@@ -117,6 +117,7 @@ void blk_rq_init(struct request_queue *q, struct request *rq)
 	rq->internal_tag = -1;
 	rq->start_time_ns = ktime_get_ns();
 	rq->part = NULL;
+	refcount_set(&rq->ref, 1);
 }
 EXPORT_SYMBOL(blk_rq_init);
 
Signature · 1 line
2.20.1
author maintainer
#157 lore raw

PATCH 150/171 net/mlx5e: IPoIB, Add error path in mlx5_rdma_setup_rn

In reply to Sasha Levin

From: Aya Levin <[email protected]>

[ Upstream commit ef1ce7d7b67b46661091c7ccc0396186b7a247ef ]

Check return value from mlx5e_attach_netdev, add error path on failure.

Fixes 48935bbb7ae8 ("net/mlx5e: IPoIB, Add netdevice profile skeleton")
---
 drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c +8 -1
index 9ca492b430d8..603d294757b4 100644
@@ -698,7 +698,9 @@ static int mlx5_rdma_setup_rn(struct ib_device *ibdev, u8 port_num,
 
 	prof->init(mdev, netdev, prof, ipriv);
 
-	mlx5e_attach_netdev(epriv);
+	err = mlx5e_attach_netdev(epriv);
+	if (err)
+		goto detach;
 	netif_carrier_off(netdev);
 
 	/* set rdma_netdev func pointers */
@@ -714,6 +716,11 @@ static int mlx5_rdma_setup_rn(struct ib_device *ibdev, u8 port_num,
 
 	return 0;
 
+detach:
+	prof->cleanup(epriv);
+	if (ipriv->sub_interface)
+		return err;
+	mlx5e_destroy_mdev_resources(mdev);
 destroy_ht:
 	mlx5i_pkey_qpn_ht_cleanup(netdev);
 	return err;
Signature · 1 line
2.20.1
author maintainer
#147 lore raw

PATCH 143/171 rds: Accept peer connection reject messages due to incompatible version

In reply to Sasha Levin

From: Gerd Rausch <[email protected]>

[ Upstream commit 8c6166cfc9cd48e93d9176561e50b63cef4330d5 ]

Prior to
commit d021fabf525ff ("rds: rdma: add consumer reject")

function "rds_rdma_cm_event_handler_cmn" would always honor a rejected connection attempt by issuing a "rds_conn_drop".

The commit mentioned above added a "break", eliminating
the "fallthrough" case and made the "rds_conn_drop" rather conditional:

Now it only happens if a "consumer defined" reject (i.e. "rdma_reject") carries an integer-value of "1" inside "private_data":

if (!conn)

    break;
    err = (int *)rdma_consumer_reject_data(cm_id, event, &len);
    if (!err || (err && ((*err) == RDS_RDMA_REJ_INCOMPAT))) {
      pr_warn("RDS/RDMA: conn <%pI6c, %pI6c> rejected, dropping connection\n",
              &conn->c_laddr, &conn->c_faddr);
              conn->c_proposed_version = RDS_PROTOCOL_COMPAT_VERSION;
              rds_conn_drop(conn);
    }
    rdsdebug("Connection rejected: %s\n",
             rdma_reject_msg(cm_id, event->status));
    break;
    /* FALLTHROUGH */

A number of issues are worth mentioning here:
#1) Previous versions of the RDS code simply rejected a connection
by calling "rdma_reject(cm_id, NULL, 0);"
So the value of the payload in "private_data" will not be "1", but "0".

#2) Now the code has become dependent on host byte order and sizing.
If one peer is big-endian, the other is little-endian, or there's a difference in sizeof(int) (e.g. ILP64 vs LP64), the *err check does not work as intended.

#3) There is no check for "len" to see if the data behind *err is even valid.
Luckily, it appears that the "rdma_reject(cm_id, NULL, 0)" will always carry 148 bytes of zeroized payload.
But that should probably not be relied upon here.

#4) With the added "break;",
we might as well drop the misleading "/* FALLTHROUGH */" comment.

This commit does _not_ address issue #2, as the sender would have to agree on a byte order as well.

Here is the sequence of messages in this observed error-scenario:
Host-A is pre-QoS changes (excluding the commit mentioned above) Host-B is post-QoS changes (including the commit mentioned above)

#1 Host-B
issues a connection request via function "rds_conn_path_transition" connection state transitions to "RDS_CONN_CONNECTING"

#2 Host-A
rejects the incompatible connection request (from #1) It does so by calling "rdma_reject(cm_id, NULL, 0);"

#3 Host-B
receives an "RDMA_CM_EVENT_REJECTED" event (from #2) But since the code is changed in the way described above, it won't drop the connection here, simply because "*err == 0".

#4 Host-A
issues a connection request

#5 Host-B
receives an "RDMA_CM_EVENT_CONNECT_REQUEST" event and ends up calling "rds_ib_cm_handle_connect".
But since the state is already in "RDS_CONN_CONNECTING" (as of #1) it will end up issuing a "rdma_reject" without dropping the connection:
if (rds_conn_state(conn) == RDS_CONN_CONNECTING) {
/* Wait and see - our connect may still be succeeding */ rds_ib_stats_inc(s_ib_connect_raced);
}
goto out;

#6 Host-A
receives an "RDMA_CM_EVENT_REJECTED" event (from #5), drops the connection and tries again (goto #4) until it gives up.

---
 net/rds/rdma_transport.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
net/rds/rdma_transport.c +3 -2
index 46bce8389066..9db455d02255 100644
@@ -112,7 +112,9 @@ static int rds_rdma_cm_event_handler_cmn(struct rdma_cm_id *cm_id,
 		if (!conn)
 			break;
 		err = (int *)rdma_consumer_reject_data(cm_id, event, &len);
-		if (!err || (err && ((*err) == RDS_RDMA_REJ_INCOMPAT))) {
+		if (!err ||
+		    (err && len >= sizeof(*err) &&
+		     ((*err) <= RDS_RDMA_REJ_INCOMPAT))) {
 			pr_warn("RDS/RDMA: conn <%pI6c, %pI6c> rejected, dropping connection\n",
 				&conn->c_laddr, &conn->c_faddr);
 			conn->c_proposed_version = RDS_PROTOCOL_COMPAT_VERSION;
@@ -122,7 +124,6 @@ static int rds_rdma_cm_event_handler_cmn(struct rdma_cm_id *cm_id,
 		rdsdebug("Connection rejected: %s\n",
 			 rdma_reject_msg(cm_id, event->status));
 		break;
-		/* FALLTHROUGH */
 	case RDMA_CM_EVENT_ADDR_ERROR:
 	case RDMA_CM_EVENT_ROUTE_ERROR:
 	case RDMA_CM_EVENT_CONNECT_ERROR:
Signature · 1 line
2.20.1
author maintainer
#163 lore raw

PATCH 156/171 mm/kmemleak.c: fix check for softirq context

In reply to Sasha Levin

From: Dmitry Vyukov <[email protected]>

[ Upstream commit 6ef9056952532c3b746de46aa10d45b4d7797bd8 ]

in_softirq() is a wrong predicate to check if we are in a softirq context. It also returns true if we have BH disabled, so objects are falsely stamped with "softirq" comm. The correct predicate is in_serving_softirq().

If user does cat from /sys/kernel/debug/kmemleak previously they would see this, which is clearly wrong, this is system call context (see the comm):

unreferenced object 0xffff88805bd661c0 (size 64):
comm "softirq", pid 0, jiffies 4294942959 (age 12.400s) hex dump (first 32 bytes):

    00 00 00 00 00 00 00 00 ff ff ff ff 00 00 00 00  ................
    00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00  ................
  backtrace:
    [<0000000007dcb30c>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
    [<0000000007dcb30c>] slab_post_alloc_hook mm/slab.h:439 [inline]
    [<0000000007dcb30c>] slab_alloc mm/slab.c:3326 [inline]
    [<0000000007dcb30c>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
    [<00000000969722b7>] kmalloc include/linux/slab.h:547 [inline]
    [<00000000969722b7>] kzalloc include/linux/slab.h:742 [inline]
    [<00000000969722b7>] ip_mc_add1_src net/ipv4/igmp.c:1961 [inline]
    [<00000000969722b7>] ip_mc_add_src+0x36b/0x400 net/ipv4/igmp.c:2085
    [<00000000a4134b5f>] ip_mc_msfilter+0x22d/0x310 net/ipv4/igmp.c:2475
    [<00000000d20248ad>] do_ip_setsockopt.isra.0+0x19fe/0x1c00 net/ipv4/ip_sockglue.c:957
    [<000000003d367be7>] ip_setsockopt+0x3b/0xb0 net/ipv4/ip_sockglue.c:1246
    [<000000003c7c76af>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616
    [<000000000c1aeb23>] sock_common_setsockopt+0x3e/0x50 net/core/sock.c:3130
    [<000000000157b92b>] __sys_setsockopt+0x9e/0x120 net/socket.c:2078
    [<00000000a9f3d058>] __do_sys_setsockopt net/socket.c:2089 [inline]
    [<00000000a9f3d058>] __se_sys_setsockopt net/socket.c:2086 [inline]
    [<00000000a9f3d058>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086
    [<000000001b8da885>] do_syscall_64+0x7c/0x1a0 arch/x86/entry/common.c:301
    [<00000000ba770c62>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

now they will see this:

unreferenced object 0xffff88805413c800 (size 64):
comm "syz-executor.4", pid 8960, jiffies 4294994003 (age 14.350s) hex dump (first 32 bytes):

    00 7a 8a 57 80 88 ff ff e0 00 00 01 00 00 00 00  .z.W............
    00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000c5d3be64>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
    [<00000000c5d3be64>] slab_post_alloc_hook mm/slab.h:439 [inline]
    [<00000000c5d3be64>] slab_alloc mm/slab.c:3326 [inline]
    [<00000000c5d3be64>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
    [<0000000023865be2>] kmalloc include/linux/slab.h:547 [inline]
    [<0000000023865be2>] kzalloc include/linux/slab.h:742 [inline]
    [<0000000023865be2>] ip_mc_add1_src net/ipv4/igmp.c:1961 [inline]
    [<0000000023865be2>] ip_mc_add_src+0x36b/0x400 net/ipv4/igmp.c:2085
    [<000000003029a9d4>] ip_mc_msfilter+0x22d/0x310 net/ipv4/igmp.c:2475
    [<00000000ccd0a87c>] do_ip_setsockopt.isra.0+0x19fe/0x1c00 net/ipv4/ip_sockglue.c:957
    [<00000000a85a3785>] ip_setsockopt+0x3b/0xb0 net/ipv4/ip_sockglue.c:1246
    [<00000000ec13c18d>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616
    [<0000000052d748e3>] sock_common_setsockopt+0x3e/0x50 net/core/sock.c:3130
    [<00000000512f1014>] __sys_setsockopt+0x9e/0x120 net/socket.c:2078
    [<00000000181758bc>] __do_sys_setsockopt net/socket.c:2089 [inline]
    [<00000000181758bc>] __se_sys_setsockopt net/socket.c:2086 [inline]
    [<00000000181758bc>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086
    [<00000000d4b73623>] do_syscall_64+0x7c/0x1a0 arch/x86/entry/common.c:301
    [<00000000c1098bec>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
---
 mm/kmemleak.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
mm/kmemleak.c +1 -1
index 9dd581d11565..3e147ea83182 100644
@@ -575,7 +575,7 @@ static struct kmemleak_object *create_object(unsigned long ptr, size_t size,
 	if (in_irq()) {
 		object->pid = 0;
 		strncpy(object->comm, "hardirq", sizeof(object->comm));
-	} else if (in_softirq()) {
+	} else if (in_serving_softirq()) {
 		object->pid = 0;
 		strncpy(object->comm, "softirq", sizeof(object->comm));
 	} else {
Signature · 1 line
2.20.1
author maintainer
#165 lore raw

PATCH 158/171 mm/mincore.c: fix race between swapoff and mincore

In reply to Sasha Levin

From: Huang Ying <[email protected]>

[ Upstream commit aeb309b81c6bada783c3695528a3e10748e97285 ]

Via commit 4b3ef9daa4fc ("mm/swap: split swap cache into 64MB trunks"), after swapoff, the address_space associated with the swap device will be freed. So swap_address_space() users which touch the address_space need some kind of mechanism to prevent the address_space from being freed during accessing.

When mincore processes an unmapped range for swapped shmem pages, it doesn't hold the lock to prevent swap device from being swapped off. So the following race is possible:

CPU1 CPU2
do_mincore() swapoff()
walk_page_range()

    mincore_unmapped_range()
      __mincore_unmapped_range
        mincore_page
	  as = swap_address_space()
          ...				  exit_swap_address_space()
          ...				    kvfree(spaces)
	  find_get_page(as)

The address space may be accessed after being freed.

To fix the race, get_swap_device()/put_swap_device() is used to enclose find_get_page() to check whether the swap entry is valid and prevent the swap device from being swapoff during accessing.

Fixes 4b3ef9daa4fc ("mm/swap: split swap cache into 64MB trunks")
Cc Hugh Dickins <[email protected]>
Cc Paul E. McKenney <[email protected]>
Cc Minchan Kim <[email protected]>
Cc Johannes Weiner <[email protected]>
Cc Tim Chen <[email protected]>
Cc Mel Gorman <[email protected]>
Cc Jérôme Glisse <[email protected]>
Cc Andrea Arcangeli <[email protected]>
Cc Yang Shi <[email protected]>
Cc David Rientjes <[email protected]>
Cc Rik van Riel <[email protected]>
Cc Jan Kara <[email protected]>
Cc Dave Jiang <[email protected]>
Cc Daniel Jordan <[email protected]>
Cc Andrea Parri <[email protected]>
---
 mm/mincore.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)
mm/mincore.c +10 -2
index c3f058bd0faf..4fe91d497436 100644
@@ -68,8 +68,16 @@ static unsigned char mincore_page(struct address_space *mapping, pgoff_t pgoff)
 		 */
 		if (xa_is_value(page)) {
 			swp_entry_t swp = radix_to_swp_entry(page);
-			page = find_get_page(swap_address_space(swp),
-					     swp_offset(swp));
+			struct swap_info_struct *si;
+
+			/* Prevent swap device to being swapoff under us */
+			si = get_swap_device(swp);
+			if (si) {
+				page = find_get_page(swap_address_space(swp),
+						     swp_offset(swp));
+				put_swap_device(si);
+			} else
+				page = NULL;
 		}
 	} else
 		page = find_get_page(mapping, pgoff);
Signature · 1 line
2.20.1
author maintainer
#159 lore raw

PATCH 152/171 block/bio-integrity: fix a memory leak bug

In reply to Sasha Levin

From: Wenwen Wang <[email protected]>

[ Upstream commit e7bf90e5afe3aa1d1282c1635a49e17a32c4ecec ]

In bio_integrity_prep(), a kernel buffer is allocated through kmalloc() to hold integrity metadata. Later on, the buffer will be attached to the bio structure through bio_integrity_add_page(), which returns the number of bytes of integrity metadata attached. Due to unexpected situations, bio_integrity_add_page() may return 0. As a result, bio_integrity_prep() needs to be terminated with 'false' returned to indicate this error. However, the allocated kernel buffer is not freed on this execution path, leading to a memory leak.

To fix this issue, free the allocated buffer before returning from bio_integrity_prep().

---
 block/bio-integrity.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
block/bio-integrity.c +6 -2
index 4db620849515..fb95dbb21dd8 100644
@@ -276,8 +276,12 @@ bool bio_integrity_prep(struct bio *bio)
 		ret = bio_integrity_add_page(bio, virt_to_page(buf),
 					     bytes, offset);
 
-		if (ret == 0)
-			return false;
+		if (ret == 0) {
+			printk(KERN_ERR "could not attach integrity payload\n");
+			kfree(buf);
+			status = BLK_STS_RESOURCE;
+			goto err_end_io;
+		}
 
 		if (ret < bytes)
 			break;
Signature · 1 line
2.20.1
author maintainer
#166 lore raw

PATCH 159/171 mm/gup.c: mark undo_dev_pagemap as __maybe_unused

In reply to Sasha Levin

From: Guenter Roeck <[email protected]>

[ Upstream commit 790c73690c2bbecb3f6f8becbdb11ddc9bcff8cc ]

Several mips builds generate the following build warning.

mm/gup.c:1788:13: warning: 'undo_dev_pagemap' defined but not used

The function is declared unconditionally but only called from behind various ifdefs. Mark it __maybe_unused.

---
 mm/gup.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
mm/gup.c +2 -1
index ddde097cf9e4..22855ff0b448 100644
@@ -1696,7 +1696,8 @@ static inline pte_t gup_get_pte(pte_t *ptep)
 }
 #endif
 
-static void undo_dev_pagemap(int *nr, int nr_start, struct page **pages)
+static void __maybe_unused undo_dev_pagemap(int *nr, int nr_start,
+					    struct page **pages)
 {
 	while ((*nr) - nr_start) {
 		struct page *page = pages[--(*nr)];
Signature · 1 line
2.20.1
author maintainer
#167 lore raw

PATCH 160/171 mm/gup.c: remove some BUG_ONs from get_gate_page()

In reply to Sasha Levin

From: Andy Lutomirski <[email protected]>

[ Upstream commit b5d1c39f34d1c9bca0c4b9ae2e339fbbe264a9c7 ]

If we end up without a PGD or PUD entry backing the gate area, don't BUG -- just fail gracefully.

It's not entirely implausible that this could happen some day on x86. It doesn't right now even with an execute-only emulated vsyscall page because the fixmap shares the PUD, but the core mm code shouldn't rely on that particular detail to avoid OOPSing.

---
 mm/gup.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
mm/gup.c +6 -3
index 22855ff0b448..d2c14fc4b5d4 100644
@@ -585,11 +585,14 @@ static int get_gate_page(struct mm_struct *mm, unsigned long address,
 		pgd = pgd_offset_k(address);
 	else
 		pgd = pgd_offset_gate(mm, address);
-	BUG_ON(pgd_none(*pgd));
+	if (pgd_none(*pgd))
+		return -EFAULT;
 	p4d = p4d_offset(pgd, address);
-	BUG_ON(p4d_none(*p4d));
+	if (p4d_none(*p4d))
+		return -EFAULT;
 	pud = pud_offset(p4d, address);
-	BUG_ON(pud_none(*pud));
+	if (pud_none(*pud))
+		return -EFAULT;
 	pmd = pmd_offset(pud, address);
 	if (!pmd_present(*pmd))
 		return -EFAULT;
Signature · 1 line
2.20.1
author maintainer
#169 lore raw

PATCH 162/171 mm/mmu_notifier: use hlist_add_head_rcu()

In reply to Sasha Levin

From: Jean-Philippe Brucker <[email protected]>

[ Upstream commit 543bdb2d825fe2400d6e951f1786d92139a16931 ]

Make mmu_notifier_register() safer by issuing a memory barrier before registering a new notifier. This fixes a theoretical bug on weakly ordered CPUs. For example, take this simplified use of notifiers by a driver:

	my_struct->mn.ops = &my_ops; /* (1) */
	mmu_notifier_register(&my_struct->mn, mm)
		...
		hlist_add_head(&mn->hlist, &mm->mmu_notifiers); /* (2) */
		...

Once mmu_notifier_register() releases the mm locks, another thread can invalidate a range:

	mmu_notifier_invalidate_range()
		...
		hlist_for_each_entry_rcu(mn, &mm->mmu_notifiers, hlist) {
			if (mn->ops->invalidate_range)

The read side relies on the data dependency between mn and ops to ensure that the pointer is properly initialized. But the write side doesn't have any dependency between (1) and (2), so they could be reordered and the readers could dereference an invalid mn->ops. mmu_notifier_register() does take all the mm locks before adding to the hlist, but those have acquire semantics which isn't sufficient.

By calling hlist_add_head_rcu() instead of hlist_add_head() we update the hlist using a store-release, ensuring that readers see prior initialization of my_struct. This situation is better illustated by litmus test MP+onceassign+derefonce.

---
 mm/mmu_notifier.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
mm/mmu_notifier.c +1 -1
index 513b9607409d..b5670620aea0 100644
@@ -274,7 +274,7 @@ static int do_mmu_notifier_register(struct mmu_notifier *mn,
 	 * thanks to mm_take_all_locks().
 	 */
 	spin_lock(&mm->mmu_notifier_mm->lock);
-	hlist_add_head(&mn->hlist, &mm->mmu_notifier_mm->list);
+	hlist_add_head_rcu(&mn->hlist, &mm->mmu_notifier_mm->list);
 	spin_unlock(&mm->mmu_notifier_mm->lock);
 
 	mm_drop_all_locks(mm);
Signature · 1 line
2.20.1
author maintainer
#170 lore raw

PATCH 163/171 proc: use down_read_killable mmap_sem for /proc/pid/smaps_rollup

In reply to Sasha Levin

From: Konstantin Khlebnikov <[email protected]>

[ Upstream commit a26a97815548574213fd37f29b4b78ccc6d9ed20 ]

Do not remain stuck forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation.

---
 fs/proc/task_mmu.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
fs/proc/task_mmu.c +6 -2
index 01d4eb0e6bd1..4d9a8e72d91f 100644
@@ -828,7 +828,10 @@ static int show_smaps_rollup(struct seq_file *m, void *v)
 
 	memset(&mss, 0, sizeof(mss));
 
-	down_read(&mm->mmap_sem);
+	ret = down_read_killable(&mm->mmap_sem);
+	if (ret)
+		goto out_put_mm;
+
 	hold_task_mempolicy(priv);
 
 	for (vma = priv->mm->mmap; vma; vma = vma->vm_next) {
@@ -845,8 +848,9 @@ static int show_smaps_rollup(struct seq_file *m, void *v)
 
 	release_task_mempolicy(priv);
 	up_read(&mm->mmap_sem);
-	mmput(mm);
 
+out_put_mm:
+	mmput(mm);
 out_put_task:
 	put_task_struct(priv->task);
 	priv->task = NULL;
Signature · 1 line
2.20.1
author maintainer
#173 lore raw

PATCH 166/171 proc: use down_read_killable mmap_sem for /proc/pid/map_files

In reply to Sasha Levin

From: Konstantin Khlebnikov <[email protected]>

[ Upstream commit cd9e2bb8271c971d9f37c722be2616c7f8ba0664 ]

Do not remain stuck forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation.

It seems ->d_revalidate() could return any error (except ECHILD) to abort validation and pass error as result of lookup sequence.

---
 fs/proc/base.c | 28 ++++++++++++++++++++++------
 1 file changed, 22 insertions(+), 6 deletions(-)
fs/proc/base.c +22 -6
index 255f6754c70d..03517154fe0f 100644
@@ -1962,9 +1962,12 @@ static int map_files_d_revalidate(struct dentry *dentry, unsigned int flags)
 		goto out;
 
 	if (!dname_to_vma_addr(dentry, &vm_start, &vm_end)) {
-		down_read(&mm->mmap_sem);
-		exact_vma_exists = !!find_exact_vma(mm, vm_start, vm_end);
-		up_read(&mm->mmap_sem);
+		status = down_read_killable(&mm->mmap_sem);
+		if (!status) {
+			exact_vma_exists = !!find_exact_vma(mm, vm_start,
+							    vm_end);
+			up_read(&mm->mmap_sem);
+		}
 	}
 
 	mmput(mm);
@@ -2010,8 +2013,11 @@ static int map_files_get_link(struct dentry *dentry, struct path *path)
 	if (rc)
 		goto out_mmput;
 
+	rc = down_read_killable(&mm->mmap_sem);
+	if (rc)
+		goto out_mmput;
+
 	rc = -ENOENT;
-	down_read(&mm->mmap_sem);
 	vma = find_exact_vma(mm, vm_start, vm_end);
 	if (vma && vma->vm_file) {
 		*path = vma->vm_file->f_path;
@@ -2107,7 +2113,11 @@ static struct dentry *proc_map_files_lookup(struct inode *dir,
 	if (!mm)
 		goto out_put_task;
 
-	down_read(&mm->mmap_sem);
+	result = ERR_PTR(-EINTR);
+	if (down_read_killable(&mm->mmap_sem))
+		goto out_put_mm;
+
+	result = ERR_PTR(-ENOENT);
 	vma = find_exact_vma(mm, vm_start, vm_end);
 	if (!vma)
 		goto out_no_vma;
@@ -2118,6 +2128,7 @@ static struct dentry *proc_map_files_lookup(struct inode *dir,
 
 out_no_vma:
 	up_read(&mm->mmap_sem);
+out_put_mm:
 	mmput(mm);
 out_put_task:
 	put_task_struct(task);
@@ -2160,7 +2171,12 @@ proc_map_files_readdir(struct file *file, struct dir_context *ctx)
 	mm = get_task_mm(task);
 	if (!mm)
 		goto out_put_task;
-	down_read(&mm->mmap_sem);
+
+	ret = down_read_killable(&mm->mmap_sem);
+	if (ret) {
+		mmput(mm);
+		goto out_put_task;
+	}
 
 	nr_files = 0;
 
Signature · 1 line
2.20.1
author maintainer
#175 lore raw

PATCH 168/171 proc: use down_read_killable mmap_sem for /proc/pid/maps

In reply to Sasha Levin

From: Konstantin Khlebnikov <[email protected]>

[ Upstream commit 8a713e7df3352b8d9392476e9cf29e4e185dac32 ]

Do not remain stuck forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation.

This function is also used for /proc/pid/smaps.

---
 fs/proc/task_mmu.c   | 6 +++++-
 fs/proc/task_nommu.c | 6 +++++-
 2 files changed, 10 insertions(+), 2 deletions(-)
fs/proc/task_mmu.c +5 -1
index abcd9513efff..7f84d1477b5b 100644
@@ -166,7 +166,11 @@ static void *m_start(struct seq_file *m, loff_t *ppos)
 	if (!mm || !mmget_not_zero(mm))
 		return NULL;
 
-	down_read(&mm->mmap_sem);
+	if (down_read_killable(&mm->mmap_sem)) {
+		mmput(mm);
+		return ERR_PTR(-EINTR);
+	}
+
 	hold_task_mempolicy(priv);
 	priv->tail_vma = get_gate_vma(mm);
 
fs/proc/task_nommu.c +5 -1
index 36bf0f2e102e..7907e6419e57 100644
@@ -211,7 +211,11 @@ static void *m_start(struct seq_file *m, loff_t *pos)
 	if (!mm || !mmget_not_zero(mm))
 		return NULL;
 
-	down_read(&mm->mmap_sem);
+	if (down_read_killable(&mm->mmap_sem)) {
+		mmput(mm);
+		return ERR_PTR(-EINTR);
+	}
+
 	/* start from the Nth VMA */
 	for (p = rb_first(&mm->mm_rb); p; p = rb_next(p))
 		if (n-- == 0)
Signature · 1 line
2.20.1
author maintainer
#64 lore raw

PATCH 60/171 powerpc/pseries/mobility: prevent cpu hotplug during DT update

In reply to Sasha Levin

From: Nathan Lynch <[email protected]>

[ Upstream commit e59a175faa8df9d674247946f2a5a9c29c835725 ]

CPU online/offline code paths are sensitive to parts of the device tree (various cpu node properties, cache nodes) that can be changed as a result of a migration.

Prevent CPU hotplug while the device tree potentially is inconsistent.

Fixes 410bccf97881 ("powerpc/pseries: Partition migration in the kernel")
---
 arch/powerpc/platforms/pseries/mobility.c | 9 +++++++++
 1 file changed, 9 insertions(+)
arch/powerpc/platforms/pseries/mobility.c +9 -0
index 0c48c8964783..50e7aee3c7f3 100644
@@ -6,6 +6,7 @@
  * Copyright (C) 2010 IBM Corporation
  */
 
+#include <linux/cpu.h>
 #include <linux/kernel.h>
 #include <linux/kobject.h>
 #include <linux/smp.h>
@@ -335,11 +336,19 @@ void post_mobility_fixup(void)
 	if (rc)
 		printk(KERN_ERR "Post-mobility activate-fw failed: %d\n", rc);
 
+	/*
+	 * We don't want CPUs to go online/offline while the device
+	 * tree is being updated.
+	 */
+	cpus_read_lock();
+
 	rc = pseries_devicetree_update(MIGRATION_SCOPE);
 	if (rc)
 		printk(KERN_ERR "Post-mobility device tree update "
 			"failed: %d\n", rc);
 
+	cpus_read_unlock();
+
 	/* Possibly switch to a new RFI flush type */
 	pseries_setup_rfi_flush();
 
Signature · 1 line
2.20.1
author maintainer
#176 lore raw

PATCH 169/171 locking/lockdep: Fix lock used or unused stats error

In reply to Sasha Levin

From: Yuyang Du <[email protected]>

[ Upstream commit 68d41d8c94a31dfb8233ab90b9baf41a2ed2da68 ]

The stats variable nr_unused_locks is incremented every time a new lock class is register and decremented when the lock is first used in __lock_acquire(). And after all, it is shown and checked in lockdep_stats.

However, under configurations that either CONFIG_TRACE_IRQFLAGS or CONFIG_PROVE_LOCKING is not defined:

The commit:

091806515124b20 ("locking/lockdep: Consolidate lock usage bit initialization")

missed marking the LOCK_USED flag at IRQ usage initialization because as mark_usage() is not called. And the commit:

  886532aee3cd42d ("locking/lockdep: Move mark_lock() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING")

further made mark_lock() not defined such that the LOCK_USED cannot be marked at all when the lock is first acquired.

As a result, we fix this by not showing and checking the stats under such configurations for lockdep_stats.

---
 kernel/locking/lockdep_proc.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
kernel/locking/lockdep_proc.c +3 -2
index 9c49ec645d8b..65b6a1600c8f 100644
@@ -210,6 +210,7 @@ static int lockdep_stats_show(struct seq_file *m, void *v)
 		      nr_hardirq_read_safe = 0, nr_hardirq_read_unsafe = 0,
 		      sum_forward_deps = 0;
 
+#ifdef CONFIG_PROVE_LOCKING
 	list_for_each_entry(class, &all_lock_classes, lock_entry) {
 
 		if (class->usage_mask == 0)
@@ -241,12 +242,12 @@ static int lockdep_stats_show(struct seq_file *m, void *v)
 		if (class->usage_mask & LOCKF_ENABLED_HARDIRQ_READ)
 			nr_hardirq_read_unsafe++;
 
-#ifdef CONFIG_PROVE_LOCKING
 		sum_forward_deps += lockdep_count_forward_deps(class);
-#endif
 	}
 #ifdef CONFIG_DEBUG_LOCKDEP
 	DEBUG_LOCKS_WARN_ON(debug_atomic_read(nr_unused_locks) != nr_unused);
+#endif
+
 #endif
 	seq_printf(m, " lock-classes:                  %11lu [max: %lu]\n",
 			nr_lock_classes, MAX_LOCKDEP_KEYS);
Signature · 1 line
2.20.1
author maintainer
#177 lore raw

PATCH 170/171 mm: use down_read_killable for locking mmap_sem in access_remote_vm

In reply to Sasha Levin

From: Konstantin Khlebnikov <[email protected]>

[ Upstream commit 1e426fe28261b03f297992e89da3320b42816f4e ]

This function is used by ptrace and proc files like /proc/pid/cmdline and /proc/pid/environ.

Access_remote_vm never returns error codes, all errors are ignored and only size of successfully read data is returned. So, if current task was killed we'll simply return 0 (bytes read).

Mmap_sem could be locked for a long time or forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation.

---
 mm/memory.c | 4 +++-
 mm/nommu.c  | 3 ++-
 2 files changed, 5 insertions(+), 2 deletions(-)
mm/memory.c +3 -1
index ddf20bd0c317..9a4401d21e94 100644
@@ -4349,7 +4349,9 @@ int __access_remote_vm(struct task_struct *tsk, struct mm_struct *mm,
 	void *old_buf = buf;
 	int write = gup_flags & FOLL_WRITE;
 
-	down_read(&mm->mmap_sem);
+	if (down_read_killable(&mm->mmap_sem))
+		return 0;
+
 	/* ignore errors, just check how much was successfully transferred */
 	while (len) {
 		int bytes, ret, offset;
mm/nommu.c +2 -1
index d8c02fbe03b5..b2823519f8cd 100644
@@ -1792,7 +1792,8 @@ int __access_remote_vm(struct task_struct *tsk, struct mm_struct *mm,
 	struct vm_area_struct *vma;
 	int write = gup_flags & FOLL_WRITE;
 
-	down_read(&mm->mmap_sem);
+	if (down_read_killable(&mm->mmap_sem))
+		return 0;
 
 	/* the access must start within one of the target process's mappings */
 	vma = find_vma(mm, addr);
Signature · 1 line
2.20.1
author maintainer
#172 lore raw

PATCH 165/171 proc: use down_read_killable mmap_sem for /proc/pid/clear_refs

In reply to Sasha Levin

From: Konstantin Khlebnikov <[email protected]>

[ Upstream commit c46038017fbdcac627b670c9d4176f1d0c2f5fa3 ]

Do not remain stuck forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation.

Replace the only unkillable mmap_sem lock in clear_refs_write().

---
 fs/proc/task_mmu.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
fs/proc/task_mmu.c +4 -1
index 1d9c63cd8a3c..abcd9513efff 100644
@@ -1136,7 +1136,10 @@ static ssize_t clear_refs_write(struct file *file, const char __user *buf,
 			goto out_mm;
 		}
 
-		down_read(&mm->mmap_sem);
+		if (down_read_killable(&mm->mmap_sem)) {
+			count = -EINTR;
+			goto out_mm;
+		}
 		tlb_gather_mmu(&tlb, mm, 0, -1);
 		if (type == CLEAR_REFS_SOFT_DIRTY) {
 			for (vma = mm->mmap; vma; vma = vma->vm_next) {
Signature · 1 line
2.20.1
author maintainer
#178 lore raw

PATCH 171/171 mm, swap: fix race between swapoff and some swap operations

In reply to Sasha Levin

From: Huang Ying <[email protected]>

[ Upstream commit eb085574a7526c4375965c5fbf7e5b0c19cdd336 ]

When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below,

CPU 1 CPU 2
----- -----
do_swap_page
swapin_readahead
__read_swap_cache_async
swapoff swapcache_prepare
p->swap_map = NULL __swap_duplicate

					  p->swap_map[?] /* !!! NULL pointer access */

Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed.

To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called.

Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called.

In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too.

Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure.

Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are,

1. stop_machine() may disturb the normal execution code path on other CPUs.

2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them.

3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic.

Fixes 235b62176712 ("mm/swap: add cluster lock")
Cc Andrea Arcangeli <[email protected]>
Cc Paul E. McKenney <[email protected]>
Cc Daniel Jordan <[email protected]>
Cc Michal Hocko <[email protected]>
Cc Minchan Kim <[email protected]>
Cc Johannes Weiner <[email protected]>
Cc Tim Chen <[email protected]>
Cc Mel Gorman <[email protected]>
Cc Jérôme Glisse <[email protected]>
Cc Yang Shi <[email protected]>
Cc David Rientjes <[email protected]>
Cc Rik van Riel <[email protected]>
Cc Jan Kara <[email protected]>
Cc Dave Jiang <[email protected]>
---
 include/linux/swap.h |  13 +++-
 mm/memory.c          |   2 +-
 mm/swap_state.c      |  16 ++++-
 mm/swapfile.c        | 154 ++++++++++++++++++++++++++++++++++---------
 4 files changed, 146 insertions(+), 39 deletions(-)
include/linux/swap.h +10 -3
index 4bfb5c4ac108..6358a6185634 100644
@@ -175,8 +175,9 @@ enum {
 	SWP_PAGE_DISCARD = (1 << 10),	/* freed swap page-cluster discards */
 	SWP_STABLE_WRITES = (1 << 11),	/* no overwrite PG_writeback pages */
 	SWP_SYNCHRONOUS_IO = (1 << 12),	/* synchronous IO is efficient */
+	SWP_VALID	= (1 << 13),	/* swap is valid to be operated on? */
 					/* add others here before... */
-	SWP_SCANNING	= (1 << 13),	/* refcount in scan_swap_map */
+	SWP_SCANNING	= (1 << 14),	/* refcount in scan_swap_map */
 };
 
 #define SWAP_CLUSTER_MAX 32UL
@@ -460,7 +461,7 @@ extern unsigned int count_swap_pages(int, int);
 extern sector_t map_swap_page(struct page *, struct block_device **);
 extern sector_t swapdev_block(int, pgoff_t);
 extern int page_swapcount(struct page *);
-extern int __swap_count(struct swap_info_struct *si, swp_entry_t entry);
+extern int __swap_count(swp_entry_t entry);
 extern int __swp_swapcount(swp_entry_t entry);
 extern int swp_swapcount(swp_entry_t entry);
 extern struct swap_info_struct *page_swap_info(struct page *);
@@ -470,6 +471,12 @@ extern int try_to_free_swap(struct page *);
 struct backing_dev_info;
 extern int init_swap_address_space(unsigned int type, unsigned long nr_pages);
 extern void exit_swap_address_space(unsigned int type);
+extern struct swap_info_struct *get_swap_device(swp_entry_t entry);
+
+static inline void put_swap_device(struct swap_info_struct *si)
+{
+	rcu_read_unlock();
+}
 
 #else /* CONFIG_SWAP */
 
@@ -576,7 +583,7 @@ static inline int page_swapcount(struct page *page)
 	return 0;
 }
 
-static inline int __swap_count(struct swap_info_struct *si, swp_entry_t entry)
+static inline int __swap_count(swp_entry_t entry)
 {
 	return 0;
 }
mm/memory.c +1 -1
index 9a4401d21e94..b0efc69b2634 100644
@@ -2807,7 +2807,7 @@ vm_fault_t do_swap_page(struct vm_fault *vmf)
 		struct swap_info_struct *si = swp_swap_info(entry);
 
 		if (si->flags & SWP_SYNCHRONOUS_IO &&
-				__swap_count(si, entry) == 1) {
+				__swap_count(entry) == 1) {
 			/* skip swapcache */
 			page = alloc_page_vma(GFP_HIGHUSER_MOVABLE, vma,
 							vmf->address);
mm/swap_state.c +13 -3
index 85245fdec8d9..61453f1faf72 100644
@@ -310,8 +310,13 @@ struct page *lookup_swap_cache(swp_entry_t entry, struct vm_area_struct *vma,
 			       unsigned long addr)
 {
 	struct page *page;
+	struct swap_info_struct *si;
 
+	si = get_swap_device(entry);
+	if (!si)
+		return NULL;
 	page = find_get_page(swap_address_space(entry), swp_offset(entry));
+	put_swap_device(si);
 
 	INC_CACHE_INFO(find_total);
 	if (page) {
@@ -354,8 +359,8 @@ struct page *__read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask,
 			struct vm_area_struct *vma, unsigned long addr,
 			bool *new_page_allocated)
 {
-	struct page *found_page, *new_page = NULL;
-	struct address_space *swapper_space = swap_address_space(entry);
+	struct page *found_page = NULL, *new_page = NULL;
+	struct swap_info_struct *si;
 	int err;
 	*new_page_allocated = false;
 
@@ -365,7 +370,12 @@ struct page *__read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask,
 		 * called after lookup_swap_cache() failed, re-calling
 		 * that would confuse statistics.
 		 */
-		found_page = find_get_page(swapper_space, swp_offset(entry));
+		si = get_swap_device(entry);
+		if (!si)
+			break;
+		found_page = find_get_page(swap_address_space(entry),
+					   swp_offset(entry));
+		put_swap_device(si);
 		if (found_page)
 			break;
 
mm/swapfile.c +122 -32

264 lines not on this page · raw message

Signature · 1 line
2.20.1
author maintainer
#174 lore raw

PATCH 167/171 cxgb4: reduce kernel stack usage in cudbg_collect_mem_region()

In reply to Sasha Levin

From: Arnd Bergmann <[email protected]>

[ Upstream commit 752c2ea2d8e7c23b0f64e2e7d4337f3604d44c9f ]

The cudbg_collect_mem_region() and cudbg_read_fw_mem() both use several hundred kilobytes of kernel stack space. One gets inlined into the other, which causes the stack usage to be combined beyond the warning limit when building with clang:

drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c:1057:12: error: stack frame size of 1244 bytes in function 'cudbg_collect_mem_region' [-Werror,-Wframe-larger-than=]

Restructuring cudbg_collect_mem_region() lets clang do the same optimization that gcc does and reuse the stack slots as it can see that the large variables are never used together.

A better fix might be to avoid using cudbg_meminfo on the stack altogether, but that requires a larger rewrite.

Fixes a1c69520f785 ("cxgb4: collect MC memory dump")
---
 .../net/ethernet/chelsio/cxgb4/cudbg_lib.c    | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)
drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c +13 -6
index a76529a7662d..c2e92786608b 100644
@@ -1054,14 +1054,12 @@ static void cudbg_t4_fwcache(struct cudbg_init *pdbg_init,
 	}
 }
 
-static int cudbg_collect_mem_region(struct cudbg_init *pdbg_init,
-				    struct cudbg_buffer *dbg_buff,
-				    struct cudbg_error *cudbg_err,
-				    u8 mem_type)
+static unsigned long cudbg_mem_region_size(struct cudbg_init *pdbg_init,
+					   struct cudbg_error *cudbg_err,
+					   u8 mem_type)
 {
 	struct adapter *padap = pdbg_init->adap;
 	struct cudbg_meminfo mem_info;
-	unsigned long size;
 	u8 mc_idx;
 	int rc;
 
@@ -1075,7 +1073,16 @@ static int cudbg_collect_mem_region(struct cudbg_init *pdbg_init,
 	if (rc)
 		return rc;
 
-	size = mem_info.avail[mc_idx].limit - mem_info.avail[mc_idx].base;
+	return mem_info.avail[mc_idx].limit - mem_info.avail[mc_idx].base;
+}
+
+static int cudbg_collect_mem_region(struct cudbg_init *pdbg_init,
+				    struct cudbg_buffer *dbg_buff,
+				    struct cudbg_error *cudbg_err,
+				    u8 mem_type)
+{
+	unsigned long size = cudbg_mem_region_size(pdbg_init, cudbg_err, mem_type);
+
 	return cudbg_read_fw_mem(pdbg_init, dbg_buff, mem_type, size,
 				 cudbg_err);
 }
Signature · 1 line
2.20.1
author maintainer
#137 lore raw

PATCH 133/171 perf intel-bts: Fix potential NULL pointer dereference found by the smatch tool

In reply to Sasha Levin

From: Leo Yan <[email protected]>

[ Upstream commit 1d481458816d9424c8a05833ce0ebe72194a350e ]

Based on the following report from Smatch, fix the potential NULL pointer dereference check.

tools/perf/util/intel-bts.c:898 intel_bts_process_auxtrace_info() error: we previously assumed 'session->itrace_synth_opts' could be null (see line 894)

tools/perf/util/intel-bts.c:899 intel_bts_process_auxtrace_info() warn: variable dereferenced before check 'session->itrace_synth_opts' (see line 898)

  tools/perf/util/intel-bts.c
  894         if (session->itrace_synth_opts && session->itrace_synth_opts->set) {
  895                 bts->synth_opts = *session->itrace_synth_opts;
  896         } else {
  897                 itrace_synth_opts__set_default(&bts->synth_opts,
  898                                 session->itrace_synth_opts->default_no_sample);
                                      ^^^^^^^^^^^^^^^^^^^^^^^^^^
  899                 if (session->itrace_synth_opts)
                          ^^^^^^^^^^^^^^^^^^^^^^^^^^
  900                         bts->synth_opts.thread_stack =
  901                                 session->itrace_synth_opts->thread_stack;
  902         }

'session->itrace_synth_opts' is impossible to be a NULL pointer in intel_bts_process_auxtrace_info(), thus this patch removes the NULL test for 'session->itrace_synth_opts'.

---
 tools/perf/util/intel-bts.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
tools/perf/util/intel-bts.c +2 -3
index e32dbffebb2f..625ad3639a7e 100644
@@ -891,13 +891,12 @@ int intel_bts_process_auxtrace_info(union perf_event *event,
 	if (dump_trace)
 		return 0;
 
-	if (session->itrace_synth_opts && session->itrace_synth_opts->set) {
+	if (session->itrace_synth_opts->set) {
 		bts->synth_opts = *session->itrace_synth_opts;
 	} else {
 		itrace_synth_opts__set_default(&bts->synth_opts,
 				session->itrace_synth_opts->default_no_sample);
-		if (session->itrace_synth_opts)
-			bts->synth_opts.thread_stack =
+		bts->synth_opts.thread_stack =
 				session->itrace_synth_opts->thread_stack;
 	}
 
Signature · 7 lines
2.20.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author maintainer
#81 lore raw

PATCH 77/171 powerpc/pci/of: Fix OF flags parsing for 64bit BARs

In reply to Sasha Levin

From: Alexey Kardashevskiy <[email protected]>

[ Upstream commit df5be5be8735ef2ae80d5ae1f2453cd81a035c4b ]

When the firmware does PCI BAR resource allocation, it passes the assigned addresses and flags (prefetch/64bit/...) via the "reg" property of a PCI device device tree node so the kernel does not need to do resource allocation.

The flags are stored in resource::flags - the lower byte stores PCI_BASE_ADDRESS_SPACE/etc bits and the other bytes are IORESOURCE_IO/etc. Some flags from PCI_BASE_ADDRESS_xxx and IORESOURCE_xxx are duplicated, such as PCI_BASE_ADDRESS_MEM_PREFETCH/PCI_BASE_ADDRESS_MEM_TYPE_64/etc. When parsing the "reg" property, we copy the prefetch flag but we skip on PCI_BASE_ADDRESS_MEM_TYPE_64 which leaves the flags out of sync.

The missing IORESOURCE_MEM_64 flag comes into play under 2 conditions:
1. we remove PCI_PROBE_ONLY for pseries (by hacking pSeries_setup_arch() or by passing "/chosen/linux,pci-probe-only");
2. we request resource alignment (by passing pci=resource_alignment= via the kernel cmd line to request PAGE_SIZE alignment or defining ppc_md.pcibios_default_alignment which returns anything but 0). Note that the alignment requests are ignored if PCI_PROBE_ONLY is enabled.

With 1) and 2), the generic PCI code in the kernel unconditionally decides to:
- reassign the BARs in pci_specified_resource_alignment() (works fine)
- write new BARs to the device - this fails for 64bit BARs as the generic code looks at IORESOURCE_MEM_64 (not set) and writes only lower 32bits of the BAR and leaves the upper 32bit unmodified which breaks BAR mapping in the hypervisor.

This fixes the issue by copying the flag. This is useful if we want to enforce certain BAR alignment per platform as handling subpage sized BARs is proven to cause problems with hotplug (SLOF already aligns BARs to 64k).

---
 arch/powerpc/kernel/pci_of_scan.c | 2 ++
 1 file changed, 2 insertions(+)
arch/powerpc/kernel/pci_of_scan.c +2 -0
index 24522aa37665..c63c53b37e8e 100644
@@ -42,6 +42,8 @@ unsigned int pci_parse_of_flags(u32 addr0, int bridge)
 	if (addr0 & 0x02000000) {
 		flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY;
 		flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64;
+		if (flags & PCI_BASE_ADDRESS_MEM_TYPE_64)
+			flags |= IORESOURCE_MEM_64;
 		flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M;
 		if (addr0 & 0x40000000)
 			flags |= IORESOURCE_PREFETCH
Signature · 1 line
2.20.1
author maintainer
#96 lore raw

PATCH 92/171 powerpc/cacheflush: fix variable set but not used

In reply to Sasha Levin

From: Qian Cai <[email protected]>

[ Upstream commit 04db3ede40ae4fc23a5c4237254c4a53bbe4c1f2 ]

The powerpc's flush_cache_vmap() is defined as a macro and never use both of its arguments, so it will generate a compilation warning,

lib/ioremap.c: In function 'ioremap_page_range':
lib/ioremap.c:203:16: warning: variable 'start' set but not used [-Wunused-but-set-variable]

Fix it by making it an inline function.

---
 arch/powerpc/include/asm/cacheflush.h | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
arch/powerpc/include/asm/cacheflush.h +5 -2
index 74d60cfe8ce5..fd318f7c3eed 100644
@@ -29,9 +29,12 @@
  * not expect this type of fault. flush_cache_vmap is not exactly the right
  * place to put this, but it seems to work well enough.
  */
-#define flush_cache_vmap(start, end)		do { asm volatile("ptesync" ::: "memory"); } while (0)
+static inline void flush_cache_vmap(unsigned long start, unsigned long end)
+{
+	asm volatile("ptesync" ::: "memory");
+}
 #else
-#define flush_cache_vmap(start, end)		do { } while (0)
+static inline void flush_cache_vmap(unsigned long start, unsigned long end) { }
 #endif
 
 #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
Signature · 1 line
2.20.1
author maintainer
#111 lore raw

PATCH 107/171 powerpc/mm: mark more tlb functions as __always_inline

In reply to Sasha Levin

From: Masahiro Yamada <[email protected]>

[ Upstream commit 6d3ca7e73642ce17398f4cd5df1780da4a1ccdaf ]

With CONFIG_OPTIMIZE_INLINING enabled, Laura Abbott reported error with gcc 9.1.1:

arch/powerpc/mm/book3s64/radix_tlb.c: In function '_tlbiel_pid':
arch/powerpc/mm/book3s64/radix_tlb.c:104:2: warning: asm operand 3 probably doesn't match constraints

    104 |  asm volatile(PPC_TLBIEL(%0, %4, %3, %2, %1)
        |  ^~~

arch/powerpc/mm/book3s64/radix_tlb.c:104:2: error: impossible constraint in 'asm'

Fixing _tlbiel_pid() is enough to address the warning above, but I inlined more functions to fix all potential issues.

To meet the "i" (immediate) constraint for the asm operands, functions propagating "ric" must be always inlined.

Fixes 9012d011660e ("compiler: allow all arches to enable CONFIG_OPTIMIZE_INLINING")
---
 arch/powerpc/mm/book3s64/hash_native.c |  2 +-
 arch/powerpc/mm/book3s64/radix_tlb.c   | 32 +++++++++++++-------------
 2 files changed, 17 insertions(+), 17 deletions(-)
arch/powerpc/mm/book3s64/hash_native.c +1 -1
index 30d62ffe3310..1322c59cb5dd 100644
@@ -56,7 +56,7 @@ static inline void tlbiel_hash_set_isa206(unsigned int set, unsigned int is)
  * tlbiel instruction for hash, set invalidation
  * i.e., r=1 and is=01 or is=10 or is=11
  */
-static inline void tlbiel_hash_set_isa300(unsigned int set, unsigned int is,
+static __always_inline void tlbiel_hash_set_isa300(unsigned int set, unsigned int is,
 					unsigned int pid,
 					unsigned int ric, unsigned int prs)
 {
arch/powerpc/mm/book3s64/radix_tlb.c +16 -16
index bb9835681315..d0cd5271a57c 100644
@@ -25,7 +25,7 @@
  * tlbiel instruction for radix, set invalidation
  * i.e., r=1 and is=01 or is=10 or is=11
  */
-static inline void tlbiel_radix_set_isa300(unsigned int set, unsigned int is,
+static __always_inline void tlbiel_radix_set_isa300(unsigned int set, unsigned int is,
 					unsigned int pid,
 					unsigned int ric, unsigned int prs)
 {
@@ -146,8 +146,8 @@ static __always_inline void __tlbie_lpid(unsigned long lpid, unsigned long ric)
 	trace_tlbie(lpid, 0, rb, rs, ric, prs, r);
 }
 
-static inline void __tlbiel_lpid_guest(unsigned long lpid, int set,
-				unsigned long ric)
+static __always_inline void __tlbiel_lpid_guest(unsigned long lpid, int set,
+						unsigned long ric)
 {
 	unsigned long rb,rs,prs,r;
 
@@ -163,8 +163,8 @@ static inline void __tlbiel_lpid_guest(unsigned long lpid, int set,
 }
 
 
-static inline void __tlbiel_va(unsigned long va, unsigned long pid,
-			       unsigned long ap, unsigned long ric)
+static __always_inline void __tlbiel_va(unsigned long va, unsigned long pid,
+					unsigned long ap, unsigned long ric)
 {
 	unsigned long rb,rs,prs,r;
 
@@ -179,8 +179,8 @@ static inline void __tlbiel_va(unsigned long va, unsigned long pid,
 	trace_tlbie(0, 1, rb, rs, ric, prs, r);
 }
 
-static inline void __tlbie_va(unsigned long va, unsigned long pid,
-			      unsigned long ap, unsigned long ric)
+static __always_inline void __tlbie_va(unsigned long va, unsigned long pid,
+				       unsigned long ap, unsigned long ric)
 {
 	unsigned long rb,rs,prs,r;
 
@@ -195,8 +195,8 @@ static inline void __tlbie_va(unsigned long va, unsigned long pid,
 	trace_tlbie(0, 0, rb, rs, ric, prs, r);
 }
 
-static inline void __tlbie_lpid_va(unsigned long va, unsigned long lpid,
-			      unsigned long ap, unsigned long ric)
+static __always_inline void __tlbie_lpid_va(unsigned long va, unsigned long lpid,
+					    unsigned long ap, unsigned long ric)
 {
 	unsigned long rb,rs,prs,r;
 
@@ -235,7 +235,7 @@ static inline void fixup_tlbie_lpid(unsigned long lpid)
 /*
  * We use 128 set in radix mode and 256 set in hpt mode.
  */
-static inline void _tlbiel_pid(unsigned long pid, unsigned long ric)
+static __always_inline void _tlbiel_pid(unsigned long pid, unsigned long ric)
 {
 	int set;
 
@@ -337,7 +337,7 @@ static inline void _tlbie_lpid(unsigned long lpid, unsigned long ric)
 	asm volatile("eieio; tlbsync; ptesync": : :"memory");
 }
 
-static inline void _tlbiel_lpid_guest(unsigned long lpid, unsigned long ric)
+static __always_inline void _tlbiel_lpid_guest(unsigned long lpid, unsigned long ric)
 {
 	int set;
 
@@ -377,8 +377,8 @@ static inline void __tlbiel_va_range(unsigned long start, unsigned long end,
 		__tlbiel_va(addr, pid, ap, RIC_FLUSH_TLB);
 }
 
-static inline void _tlbiel_va(unsigned long va, unsigned long pid,
-			      unsigned long psize, unsigned long ric)
+static __always_inline void _tlbiel_va(unsigned long va, unsigned long pid,
+				       unsigned long psize, unsigned long ric)
 {
 	unsigned long ap = mmu_get_ap(psize);
 
@@ -409,8 +409,8 @@ static inline void __tlbie_va_range(unsigned long start, unsigned long end,
 		__tlbie_va(addr, pid, ap, RIC_FLUSH_TLB);
 }
 
-static inline void _tlbie_va(unsigned long va, unsigned long pid,
-			      unsigned long psize, unsigned long ric)
+static __always_inline void _tlbie_va(unsigned long va, unsigned long pid,
+				      unsigned long psize, unsigned long ric)
 {
 	unsigned long ap = mmu_get_ap(psize);
 
@@ -420,7 +420,7 @@ static inline void _tlbie_va(unsigned long va, unsigned long pid,
 	asm volatile("eieio; tlbsync; ptesync": : :"memory");
 }
 
-static inline void _tlbie_lpid_va(unsigned long va, unsigned long lpid,
+static __always_inline void _tlbie_lpid_va(unsigned long va, unsigned long lpid,
 			      unsigned long psize, unsigned long ric)
 {
 	unsigned long ap = mmu_get_ap(psize);
Signature · 1 line
2.20.1
author maintainer
#116 lore raw

PATCH 112/171 powerpc/mm: Handle page table allocation failures

In reply to Sasha Levin

From: "Aneesh Kumar K.V" <[email protected]>

[ Upstream commit 2230ebf6e6dd0b7751e2921b40f6cfe34f09bb16 ]

This fixes kernel crash that arises due to not handling page table allocation failures while allocating hugetlb page table.

Fixes e2b3d202d1db ("powerpc: Switch 16GB and 16MB explicit hugepages to a different page table format")
---
 arch/powerpc/mm/hugetlbpage.c | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/powerpc/mm/hugetlbpage.c +8 -0
index b5d92dc32844..1de0f43a68e5 100644
@@ -130,6 +130,8 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz
 	} else {
 		pdshift = PUD_SHIFT;
 		pu = pud_alloc(mm, pg, addr);
+		if (!pu)
+			return NULL;
 		if (pshift == PUD_SHIFT)
 			return (pte_t *)pu;
 		else if (pshift > PMD_SHIFT) {
@@ -138,6 +140,8 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz
 		} else {
 			pdshift = PMD_SHIFT;
 			pm = pmd_alloc(mm, pu, addr);
+			if (!pm)
+				return NULL;
 			if (pshift == PMD_SHIFT)
 				/* 16MB hugepage */
 				return (pte_t *)pm;
@@ -154,12 +158,16 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz
 	} else {
 		pdshift = PUD_SHIFT;
 		pu = pud_alloc(mm, pg, addr);
+		if (!pu)
+			return NULL;
 		if (pshift >= PUD_SHIFT) {
 			ptl = pud_lockptr(mm, pu);
 			hpdp = (hugepd_t *)pu;
 		} else {
 			pdshift = PMD_SHIFT;
 			pm = pmd_alloc(mm, pu, addr);
+			if (!pm)
+				return NULL;
 			ptl = pmd_lockptr(mm, pm);
 			hpdp = (hugepd_t *)pm;
 		}
Signature · 1 line
2.20.1
author maintainer
#171 lore raw

PATCH 164/171 proc: use down_read_killable mmap_sem for /proc/pid/pagemap

In reply to Sasha Levin

From: Konstantin Khlebnikov <[email protected]>

[ Upstream commit ad80b932c57d85fd6377f97f359b025baf179a87 ]

Do not remain stuck forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation.

---
 fs/proc/task_mmu.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
fs/proc/task_mmu.c +3 -1
index 4d9a8e72d91f..1d9c63cd8a3c 100644
@@ -1543,7 +1543,9 @@ static ssize_t pagemap_read(struct file *file, char __user *buf,
 		/* overflow ? */
 		if (end < start_vaddr || end > end_vaddr)
 			end = end_vaddr;
-		down_read(&mm->mmap_sem);
+		ret = down_read_killable(&mm->mmap_sem);
+		if (ret)
+			goto out_free;
 		ret = walk_page_range(start_vaddr, end, &pagemap_walk);
 		up_read(&mm->mmap_sem);
 		start_vaddr = end;
Signature · 1 line
2.20.1
author maintainer
#168 lore raw

PATCH 161/171 memcg, fsnotify: no oom-kill for remote memcg charging

In reply to Sasha Levin

From: Shakeel Butt <[email protected]>

[ Upstream commit ec165450968b26298bd1c373de37b0ab6d826b33 ]

Commit d46eb14b735b ("fs: fsnotify: account fsnotify metadata to kmemcg") added remote memcg charging for fanotify and inotify event objects. The aim was to charge the memory to the listener who is interested in the events but without triggering the OOM killer. Otherwise there would be security concerns for the listener.

At the time, oom-kill trigger was not in the charging path. A parallel work added the oom-kill back to charging path i.e. commit 29ef680ae7c2 ("memcg, oom: move out_of_memory back to the charge path"). So to not trigger oom-killer in the remote memcg, explicitly add __GFP_RETRY_MAYFAIL to the fanotigy and inotify event allocations.

---
 fs/notify/fanotify/fanotify.c        | 5 ++++-
 fs/notify/inotify/inotify_fsnotify.c | 8 ++++++--
 2 files changed, 10 insertions(+), 3 deletions(-)
fs/notify/fanotify/fanotify.c +4 -1
index b428c295d13f..5778d1347b35 100644
@@ -288,10 +288,13 @@ struct fanotify_event *fanotify_alloc_event(struct fsnotify_group *group,
 	/*
 	 * For queues with unlimited length lost events are not expected and
 	 * can possibly have security implications. Avoid losing events when
-	 * memory is short.
+	 * memory is short. For the limited size queues, avoid OOM killer in the
+	 * target monitoring memcg as it may have security repercussion.
 	 */
 	if (group->max_events == UINT_MAX)
 		gfp |= __GFP_NOFAIL;
+	else
+		gfp |= __GFP_RETRY_MAYFAIL;
 
 	/* Whoever is interested in the event, pays for the allocation. */
 	memalloc_use_memcg(group->memcg);
fs/notify/inotify/inotify_fsnotify.c +6 -2
index 2fda08b2b885..d510223d302c 100644
@@ -90,9 +90,13 @@ int inotify_handle_event(struct fsnotify_group *group,
 	i_mark = container_of(inode_mark, struct inotify_inode_mark,
 			      fsn_mark);
 
-	/* Whoever is interested in the event, pays for the allocation. */
+	/*
+	 * Whoever is interested in the event, pays for the allocation. Do not
+	 * trigger OOM killer in the target monitoring memcg as it may have
+	 * security repercussion.
+	 */
 	memalloc_use_memcg(group->memcg);
-	event = kmalloc(alloc_len, GFP_KERNEL_ACCOUNT);
+	event = kmalloc(alloc_len, GFP_KERNEL_ACCOUNT | __GFP_RETRY_MAYFAIL);
 	memalloc_unuse_memcg();
 
 	if (unlikely(!event)) {
Signature · 1 line
2.20.1
author maintainer
#164 lore raw

PATCH 157/171 9p: pass the correct prototype to read_cache_page

In reply to Sasha Levin

From: Christoph Hellwig <[email protected]>

[ Upstream commit f053cbd4366051d7eb6ba1b8d529d20f719c2963 ]

Fix the callback 9p passes to read_cache_page to actually have the proper type expected. Casting around function pointers can easily hide typing bugs, and defeats control flow protection.

---
 fs/9p/vfs_addr.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
fs/9p/vfs_addr.c +4 -2
index bc57ae9e2963..cce9ace651a2 100644
@@ -35,8 +35,9 @@
  * @page: structure to page
  *
  */
-static int v9fs_fid_readpage(struct p9_fid *fid, struct page *page)
+static int v9fs_fid_readpage(void *data, struct page *page)
 {
+	struct p9_fid *fid = data;
 	struct inode *inode = page->mapping->host;
 	struct bio_vec bvec = {.bv_page = page, .bv_len = PAGE_SIZE};
 	struct iov_iter to;
@@ -107,7 +108,8 @@ static int v9fs_vfs_readpages(struct file *filp, struct address_space *mapping,
 	if (ret == 0)
 		return ret;
 
-	ret = read_cache_pages(mapping, pages, (void *)v9fs_vfs_readpage, filp);
+	ret = read_cache_pages(mapping, pages, v9fs_fid_readpage,
+			filp->private_data);
 	p9_debug(P9_DEBUG_VFS, "  = %d\n", ret);
 	return ret;
 }
Signature · 1 line
2.20.1
author maintainer
#162 lore raw

PATCH 155/171 net/mlx5: E-Switch, Fix default encap mode

In reply to Sasha Levin

From: Maor Gottlieb <[email protected]>

[ Upstream commit 9a64144d683a4395f57562d90247c61a0bf5105f ]

Encap mode is related to switchdev mode only. Move the init of the encap mode to eswitch_offloads. Before this change, we reported that eswitch supports encap, even tough the device was in non SRIOV mode.

Fixes 7768d1971de67 ('net/mlx5: E-Switch, Add control for encapsulation')
---
 drivers/net/ethernet/mellanox/mlx5/core/eswitch.c          | 5 -----
 drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 7 +++++++
 2 files changed, 7 insertions(+), 5 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +0 -5
index 6a921e24cd5e..e9339e7d6a18 100644
@@ -1882,11 +1882,6 @@ int mlx5_eswitch_init(struct mlx5_core_dev *dev)
 	esw->enabled_vports = 0;
 	esw->mode = SRIOV_NONE;
 	esw->offloads.inline_mode = MLX5_INLINE_MODE_NONE;
-	if (MLX5_CAP_ESW_FLOWTABLE_FDB(dev, reformat) &&
-	    MLX5_CAP_ESW_FLOWTABLE_FDB(dev, decap))
-		esw->offloads.encap = DEVLINK_ESWITCH_ENCAP_MODE_BASIC;
-	else
-		esw->offloads.encap = DEVLINK_ESWITCH_ENCAP_MODE_NONE;
 
 	dev->priv.eswitch = esw;
 	return 0;
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +7 -0
index 47b446d30f71..c2beadc41c40 100644
@@ -1840,6 +1840,12 @@ int esw_offloads_init(struct mlx5_eswitch *esw, int vf_nvports,
 {
 	int err;
 
+	if (MLX5_CAP_ESW_FLOWTABLE_FDB(esw->dev, reformat) &&
+	    MLX5_CAP_ESW_FLOWTABLE_FDB(esw->dev, decap))
+		esw->offloads.encap = DEVLINK_ESWITCH_ENCAP_MODE_BASIC;
+	else
+		esw->offloads.encap = DEVLINK_ESWITCH_ENCAP_MODE_NONE;
+
 	err = esw_offloads_steering_init(esw, vf_nvports, total_nvports);
 	if (err)
 		return err;
@@ -1901,6 +1907,7 @@ void esw_offloads_cleanup(struct mlx5_eswitch *esw)
 	esw_offloads_devcom_cleanup(esw);
 	esw_offloads_unload_all_reps(esw, num_vfs);
 	esw_offloads_steering_cleanup(esw);
+	esw->offloads.encap = DEVLINK_ESWITCH_ENCAP_MODE_NONE;
 }
 
 static int esw_mode_from_devlink(u16 mode, u16 *mlx5_mode)
Signature · 1 line
2.20.1
author maintainer
#152 lore raw

PATCH 148/171 powerpc/eeh: Handle hugepages in ioremap space

In reply to Sasha Levin

From: Oliver O'Halloran <[email protected]>

[ Upstream commit 33439620680be5225c1b8806579a291e0d761ca0 ]

In commit 4a7b06c157a2 ("powerpc/eeh: Handle hugepages in ioremap space") support for using hugepages in the vmalloc and ioremap areas was enabled for radix. Unfortunately this broke EEH MMIO error checking.

Detection works by inserting a hook which checks the results of the ioreadXX() set of functions. When a read returns a 0xFFs response we need to check for an error which we do by mapping the (virtual) MMIO address back to a physical address, then mapping physical address to a PCI device via an interval tree.

When translating virt -> phys we currently assume the ioremap space is only populated by PAGE_SIZE mappings. If a hugepage mapping is found we emit a WARN_ON(), but otherwise handles the check as though a normal page was found. In pathalogical cases such as copying a buffer containing a lot of 0xFFs from BAR memory this can result in the system not booting because it's too busy printing WARN_ON()s.

There's no real reason to assume huge pages can't be present and we're prefectly capable of handling them, so do that.

---
 arch/powerpc/kernel/eeh.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)
arch/powerpc/kernel/eeh.c +12 -3
index f192d57db47d..c0e4b73191f3 100644
@@ -354,10 +354,19 @@ static inline unsigned long eeh_token_to_phys(unsigned long token)
 	ptep = find_init_mm_pte(token, &hugepage_shift);
 	if (!ptep)
 		return token;
-	WARN_ON(hugepage_shift);
-	pa = pte_pfn(*ptep) << PAGE_SHIFT;
 
-	return pa | (token & (PAGE_SIZE-1));
+	pa = pte_pfn(*ptep);
+
+	/* On radix we can do hugepage mappings for io, so handle that */
+	if (hugepage_shift) {
+		pa <<= hugepage_shift;
+		pa |= token & ((1ul << hugepage_shift) - 1);
+	} else {
+		pa <<= PAGE_SHIFT;
+		pa |= token & (PAGE_SIZE - 1);
+	}
+
+	return pa;
 }
 
 /*
Signature · 1 line
2.20.1
author maintainer
#142 lore raw

PATCH 138/171 io_uring: fix io_sq_thread_stop running in front of io_sq_thread

In reply to Sasha Levin

From: Jackie Liu <[email protected]>

[ Upstream commit a4c0b3decb33fb4a2b5ecc6234a50680f0b21e7d ]

INFO: task syz-executor.5:8634 blocked for more than 143 seconds.
       Not tainted 5.2.0-rc5+ #3
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
syz-executor.5  D25632  8634   8224 0x00004004
Call Trace:
  context_switch kernel/sched/core.c:2818 [inline]
  __schedule+0x658/0x9e0 kernel/sched/core.c:3445
  schedule+0x131/0x1d0 kernel/sched/core.c:3509
  schedule_timeout+0x9a/0x2b0 kernel/time/timer.c:1783
  do_wait_for_common+0x35e/0x5a0 kernel/sched/completion.c:83
  __wait_for_common kernel/sched/completion.c:104 [inline]
  wait_for_common kernel/sched/completion.c:115 [inline]
  wait_for_completion+0x47/0x60 kernel/sched/completion.c:136
  kthread_stop+0xb4/0x150 kernel/kthread.c:559
  io_sq_thread_stop fs/io_uring.c:2252 [inline]
  io_finish_async fs/io_uring.c:2259 [inline]
  io_ring_ctx_free fs/io_uring.c:2770 [inline]
  io_ring_ctx_wait_and_kill+0x268/0x880 fs/io_uring.c:2834
  io_uring_release+0x5d/0x70 fs/io_uring.c:2842
  __fput+0x2e4/0x740 fs/file_table.c:280
  ____fput+0x15/0x20 fs/file_table.c:313
  task_work_run+0x17e/0x1b0 kernel/task_work.c:113
  tracehook_notify_resume include/linux/tracehook.h:185 [inline]
  exit_to_usermode_loop arch/x86/entry/common.c:168 [inline]
  prepare_exit_to_usermode+0x402/0x4f0 arch/x86/entry/common.c:199
  syscall_return_slowpath+0x110/0x440 arch/x86/entry/common.c:279
  do_syscall_64+0x126/0x140 arch/x86/entry/common.c:304
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x412fb1
Code: 80 3b 7c 0f 84 c7 02 00 00 c7 85 d0 00 00 00 00 00 00 00 48 8b 05 cf

a6 24 00 49 8b 14 24 41 b9 cb 2a 44 00 48 89 ee 48 89 df <48> 85 c0 4c 0f 45 c8 45 31 c0 31 c9 e8 0e 5b 00 00 85 c0 41 89 c7
RSP: 002b:00007ffe7ee6a180 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000412fb1
RDX: 0000001b2d920000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 0000000000000001 R08: 00000000f3a3e1f8 R09: 00000000f3a3e1fc
R10: 00007ffe7ee6a260 R11: 0000000000000293 R12: 000000000075c9a0
R13: 000000000075c9a0 R14: 0000000000024c00 R15: 000000000075bf2c

=============================================

There is an wrong logic, when kthread_park running in front of io_sq_thread.

CPU#0 CPU#1

io_sq_thread_stop: int kthread(void *_create):

kthread_park()

					__kthread_parkme(self);	 <<< Wrong
kthread_stop()
    << wait for self->exited
    << clear_bit KTHREAD_SHOULD_PARK

					ret = threadfn(data);
					   |
					   |- io_sq_thread
					       |- kthread_should_park()	<< false
					       |- schedule() <<< nobody wake up

stuck CPU#0 stuck CPU#1

So, use a new variable sqo_thread_started to ensure that io_sq_thread run first, then io_sq_thread_stop.

---
 fs/io_uring.c | 5 +++++
 1 file changed, 5 insertions(+)
fs/io_uring.c +5 -0
index 4ef62a45045d..fef2cd44b2ac 100644
@@ -231,6 +231,7 @@ struct io_ring_ctx {
 	struct task_struct	*sqo_thread;	/* if using sq thread polling */
 	struct mm_struct	*sqo_mm;
 	wait_queue_head_t	sqo_wait;
+	struct completion	sqo_thread_started;
 
 	struct {
 		/* CQ ring */
@@ -403,6 +404,7 @@ static struct io_ring_ctx *io_ring_ctx_alloc(struct io_uring_params *p)
 	ctx->flags = p->flags;
 	init_waitqueue_head(&ctx->cq_wait);
 	init_completion(&ctx->ctx_done);
+	init_completion(&ctx->sqo_thread_started);
 	mutex_init(&ctx->uring_lock);
 	init_waitqueue_head(&ctx->wait);
 	for (i = 0; i < ARRAY_SIZE(ctx->pending_async); i++) {
@@ -2009,6 +2011,8 @@ static int io_sq_thread(void *data)
 	unsigned inflight;
 	unsigned long timeout;
 
+	complete(&ctx->sqo_thread_started);
+
 	old_fs = get_fs();
 	set_fs(USER_DS);
 
@@ -2243,6 +2247,7 @@ static int io_sqe_files_unregister(struct io_ring_ctx *ctx)
 static void io_sq_thread_stop(struct io_ring_ctx *ctx)
 {
 	if (ctx->sqo_thread) {
+		wait_for_completion(&ctx->sqo_thread_started);
 		/*
 		 * The park is a bit of a work-around, without it we get
 		 * warning spews on shutdown with SQPOLL set and affinity
Signature · 1 line
2.20.1
author maintainer
#135 lore raw

PATCH 131/171 RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM

In reply to Sasha Levin

From: Konstantin Taranov <[email protected]>

[ Upstream commit bdce1290493caa3f8119f24b5dacc3fb7ca27389 ]

Calculate the correct byte_len on the receiving side when a work completion is generated with IB_WC_RECV_RDMA_WITH_IMM opcode.

According to the IBA byte_len must indicate the number of written bytes, whereas it was always equal to zero for the IB_WC_RECV_RDMA_WITH_IMM opcode, even though data was transferred.

Fixes 8700e3e7c485 ("Soft RoCE driver")
---
 drivers/infiniband/sw/rxe/rxe_resp.c  | 5 ++++-
 drivers/infiniband/sw/rxe/rxe_verbs.h | 1 +
 2 files changed, 5 insertions(+), 1 deletion(-)
drivers/infiniband/sw/rxe/rxe_resp.c +4 -1
index aca9f60f9b21..1cbfbd98eb22 100644
@@ -431,6 +431,7 @@ static enum resp_states check_rkey(struct rxe_qp *qp,
 			qp->resp.va = reth_va(pkt);
 			qp->resp.rkey = reth_rkey(pkt);
 			qp->resp.resid = reth_len(pkt);
+			qp->resp.length = reth_len(pkt);
 		}
 		access = (pkt->mask & RXE_READ_MASK) ? IB_ACCESS_REMOTE_READ
 						     : IB_ACCESS_REMOTE_WRITE;
@@ -856,7 +857,9 @@ static enum resp_states do_complete(struct rxe_qp *qp,
 				pkt->mask & RXE_WRITE_MASK) ?
 					IB_WC_RECV_RDMA_WITH_IMM : IB_WC_RECV;
 		wc->vendor_err = 0;
-		wc->byte_len = wqe->dma.length - wqe->dma.resid;
+		wc->byte_len = (pkt->mask & RXE_IMMDT_MASK &&
+				pkt->mask & RXE_WRITE_MASK) ?
+					qp->resp.length : wqe->dma.length - wqe->dma.resid;
 
 		/* fields after byte_len are different between kernel and user
 		 * space
drivers/infiniband/sw/rxe/rxe_verbs.h +1 -0
index e8be7f44e3be..28bfb3ece104 100644
@@ -213,6 +213,7 @@ struct rxe_resp_info {
 	struct rxe_mem		*mr;
 	u32			resid;
 	u32			rkey;
+	u32			length;
 	u64			atomic_orig;
 
 	/* SRQ only */
Signature · 1 line
2.20.1
author maintainer
#124 lore raw

PATCH 120/171 PCI: mobiveil: Initialize Primary/Secondary/Subordinate bus numbers

In reply to Sasha Levin

From: Hou Zhiqiang <[email protected]>

[ Upstream commit 6f3ab451aa5c2cbff33197d82fe8489cbd55ad91 ]

The reset value of Primary, Secondary and Subordinate bus numbers is zero which is a broken setup.

Program a sensible default value for Primary/Secondary/Subordinate bus numbers.

---
 drivers/pci/controller/pcie-mobiveil.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/pci/controller/pcie-mobiveil.c +6 -0
index 88e9b70081fc..e4a1964e1b43 100644
@@ -501,6 +501,12 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
 		return err;
 	}
 
+	/* setup bus numbers */
+	value = csr_readl(pcie, PCI_PRIMARY_BUS);
+	value &= 0xff000000;
+	value |= 0x00ff0100;
+	csr_writel(pcie, value, PCI_PRIMARY_BUS);
+
 	/*
 	 * program Bus Master Enable Bit in Command Register in PAB Config
 	 * Space
Signature · 1 line
2.20.1
author maintainer
#123 lore raw

PATCH 119/171 kallsyms: exclude kasan local symbols on s390

In reply to Sasha Levin

From: Vasily Gorbik <[email protected]>

[ Upstream commit 33177f01ca3fe550146bb9001bec2fd806b2f40c ]

gcc asan instrumentation emits the following sequence to store frame pc when the kernel is built with CONFIG_RELOCATABLE:
debug/vsprintf.s:
.section .data.rel.ro.local,"aw"
.align 8
.LC3:

        .quad   .LASANPC4826@GOTOFF

.text
.align 8
.type number, @function
number:
.LASANPC4826:

and in case reloc is issued for LASANPC label it also gets into .symtab with the same address as actual function symbol:

$ nm -n vmlinux | grep 0000000001397150
0000000001397150 t .LASANPC4826
0000000001397150 t number

In the end kernel backtraces are almost unreadable:

[  143.748476] Call Trace:
[  143.748484] ([<000000002da3e62c>] .LASANPC2671+0x114/0x190)
[  143.748492]  [<000000002eca1a58>] .LASANPC2612+0x110/0x160
[  143.748502]  [<000000002de9d830>] print_address_description+0x80/0x3b0
[  143.748511]  [<000000002de9dd64>] __kasan_report+0x15c/0x1c8
[  143.748521]  [<000000002ecb56d4>] strrchr+0x34/0x60
[  143.748534]  [<000003ff800a9a40>] kasan_strings+0xb0/0x148 [test_kasan]
[  143.748547]  [<000003ff800a9bba>] kmalloc_tests_init+0xe2/0x528 [test_kasan]
[  143.748555]  [<000000002da2117c>] .LASANPC4069+0x354/0x748
[  143.748563]  [<000000002dbfbb16>] do_init_module+0x136/0x3b0
[  143.748571]  [<000000002dbff3f4>] .LASANPC3191+0x2164/0x25d0
[  143.748580]  [<000000002dbffc4c>] .LASANPC3196+0x184/0x1b8
[  143.748587]  [<000000002ecdf2ec>] system_call+0xd8/0x2d8

Since LASANPC labels are not even unique and get into .symtab only due to relocs filter them out in kallsyms.

---
 scripts/kallsyms.c | 3 +++
 1 file changed, 3 insertions(+)
scripts/kallsyms.c +3 -0
index e17837f1d3f2..ae6504d07fd6 100644
@@ -150,6 +150,9 @@ static int read_symbol(FILE *in, struct sym_entry *s)
 	/* exclude debugging symbols */
 	else if (stype == 'N' || stype == 'n')
 		return -1;
+	/* exclude s390 kasan local symbols */
+	else if (!strncmp(sym, ".LASANPC", 8))
+		return -1;
 
 	/* include the type field in the symbol name, so that it gets
 	 * compressed together */
Signature · 1 line
2.20.1
author maintainer
#117 lore raw

PATCH 113/171 IB/ipoib: Add child to parent list only if device initialized

In reply to Sasha Levin

From: Valentine Fatiev <[email protected]>

[ Upstream commit 91b01061fef9c57d2f5b712a6322ef51061f4efd ]

Despite failure in ipoib_dev_init() we continue with initialization flow and creation of child device. It causes to the situation where this child device is added too early to parent device list.

Change the logic, so in case of failure we properly return error from ipoib_dev_init() and add child only in success path.

---
 drivers/infiniband/ulp/ipoib/ipoib_main.c | 34 +++++++++++++----------
 1 file changed, 20 insertions(+), 14 deletions(-)
drivers/infiniband/ulp/ipoib/ipoib_main.c +20 -14
index 9b5e11d3fb85..bb904ec511be 100644
@@ -1893,12 +1893,6 @@ static void ipoib_child_init(struct net_device *ndev)
 	struct ipoib_dev_priv *priv = ipoib_priv(ndev);
 	struct ipoib_dev_priv *ppriv = ipoib_priv(priv->parent);
 
-	dev_hold(priv->parent);
-
-	down_write(&ppriv->vlan_rwsem);
-	list_add_tail(&priv->list, &ppriv->child_intfs);
-	up_write(&ppriv->vlan_rwsem);
-
 	priv->max_ib_mtu = ppriv->max_ib_mtu;
 	set_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags);
 	memcpy(priv->dev->dev_addr, ppriv->dev->dev_addr, INFINIBAND_ALEN);
@@ -1941,6 +1935,17 @@ static int ipoib_ndo_init(struct net_device *ndev)
 	if (rc) {
 		pr_warn("%s: failed to initialize device: %s port %d (ret = %d)\n",
 			priv->ca->name, priv->dev->name, priv->port, rc);
+		return rc;
+	}
+
+	if (priv->parent) {
+		struct ipoib_dev_priv *ppriv = ipoib_priv(priv->parent);
+
+		dev_hold(priv->parent);
+
+		down_write(&ppriv->vlan_rwsem);
+		list_add_tail(&priv->list, &ppriv->child_intfs);
+		up_write(&ppriv->vlan_rwsem);
 	}
 
 	return 0;
@@ -1958,6 +1963,14 @@ static void ipoib_ndo_uninit(struct net_device *dev)
 	 */
 	WARN_ON(!list_empty(&priv->child_intfs));
 
+	if (priv->parent) {
+		struct ipoib_dev_priv *ppriv = ipoib_priv(priv->parent);
+
+		down_write(&ppriv->vlan_rwsem);
+		list_del(&priv->list);
+		up_write(&ppriv->vlan_rwsem);
+	}
+
 	ipoib_neigh_hash_uninit(dev);
 
 	ipoib_ib_dev_cleanup(dev);
@@ -1969,15 +1982,8 @@ static void ipoib_ndo_uninit(struct net_device *dev)
 		priv->wq = NULL;
 	}
 
-	if (priv->parent) {
-		struct ipoib_dev_priv *ppriv = ipoib_priv(priv->parent);
-
-		down_write(&ppriv->vlan_rwsem);
-		list_del(&priv->list);
-		up_write(&ppriv->vlan_rwsem);
-
+	if (priv->parent)
 		dev_put(priv->parent);
-	}
 }
 
 static int ipoib_set_vf_link_state(struct net_device *dev, int vf, int link_state)
Signature · 1 line
2.20.1
author maintainer
#121 lore raw

PATCH 117/171 PCI: mobiveil: Fix PCI base address in MEM/IO outbound windows

In reply to Sasha Levin

From: Hou Zhiqiang <[email protected]>

[ Upstream commit f99536e9d2f55996038158a6559d4254a7cc1693 ]

The outbound memory windows PCI base addresses should be taken from the 'ranges' property of DT node to setup MEM/IO outbound windows decoding correctly instead of being hardcoded to zero.

Update the code to retrieve the PCI base address for each range and use it to program the outbound windows address decoders

Fixes 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver")
---
 drivers/pci/controller/pcie-mobiveil.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/pci/controller/pcie-mobiveil.c +3 -2
index 77052a0712d0..03d697b63e2a 100644
@@ -552,8 +552,9 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
 		if (type) {
 			/* configure outbound translation window */
 			program_ob_windows(pcie, pcie->ob_wins_configured,
-				win->res->start, 0, type,
-				resource_size(win->res));
+					   win->res->start,
+					   win->res->start - win->offset,
+					   type, resource_size(win->res));
 		}
 	}
 
Signature · 1 line
2.20.1
author maintainer
#120 lore raw

PATCH 116/171 KVM: nVMX: Stash L1's CR3 in vmcs01.GUEST_CR3 on nested entry w/o EPT

In reply to Sasha Levin

From: Sean Christopherson <[email protected]>

[ Upstream commit f087a02941feacf7d6f097522bc67c602fda18e6 ]

KVM does not have 100% coverage of VMX consistency checks, i.e. some checks that cause VM-Fail may only be detected by hardware during a nested VM-Entry. In such a case, KVM must restore L1's state to the pre-VM-Enter state as L2's state has already been loaded into KVM's software model.

L1's CR3 and PDPTRs in particular are loaded from vmcs01.GUEST_*. But when EPT is disabled, the associated fields hold KVM's shadow values, not L1's "real" values. Fortunately, when EPT is disabled the PDPTRs come from memory, i.e. are not cached in the VMCS. Which leaves CR3 as the sole anomaly.

A previously applied workaround to handle CR3 was to force nested early checks if EPT is disabled:

commit 2b27924bb1d48 ("KVM: nVMX: always use early vmcs check when EPT
is disabled")

Forcing nested early checks is undesirable as doing so adds hundreds of cycles to every nested VM-Entry. Rather than take this performance hit, handle CR3 by overwriting vmcs01.GUEST_CR3 with L1's CR3 during nested VM-Entry when EPT is disabled *and* nested early checks are disabled. By stuffing vmcs01.GUEST_CR3, nested_vmx_restore_host_state() will naturally restore the correct vcpu->arch.cr3 from vmcs01.GUEST_CR3.

These shenanigans work because nested_vmx_restore_host_state() does a full kvm_mmu_reset_context(), i.e. unloads the current MMU, which guarantees vmcs01.GUEST_CR3 will be rewritten with a new shadow CR3 prior to re-entering L1.

vcpu->arch.root_mmu.root_hpa is set to INVALID_PAGE via:

    nested_vmx_restore_host_state() ->
        kvm_mmu_reset_context() ->
            kvm_mmu_unload() ->
                kvm_mmu_free_roots()

kvm_mmu_unload() has WARN_ON(root_hpa != INVALID_PAGE), i.e. we can bank on 'root_hpa == INVALID_PAGE' unless the implementation of kvm_mmu_reset_context() is changed.

On the way into L1, VMCS.GUEST_CR3 is guaranteed to be written (on a successful entry) via:

    vcpu_enter_guest() ->
        kvm_mmu_reload() ->
            kvm_mmu_load() ->
                kvm_mmu_load_cr3() ->
                    vmx_set_cr3()

Stuff vmcs01.GUEST_CR3 if and only if nested early checks are disabled as a "late" VM-Fail should never happen win that case (KVM WARNs), and the conditional write avoids the need to restore the correct GUEST_CR3 when nested_vmx_check_vmentry_hw() fails.

Message-Id: <[email protected]>

---
 arch/x86/include/uapi/asm/vmx.h |  1 -
 arch/x86/kvm/vmx/nested.c       | 44 +++++++++++++++++----------------
 2 files changed, 23 insertions(+), 22 deletions(-)
arch/x86/include/uapi/asm/vmx.h +0 -1
index d213ec5c3766..f0b0c90dd398 100644
@@ -146,7 +146,6 @@
 
 #define VMX_ABORT_SAVE_GUEST_MSR_FAIL        1
 #define VMX_ABORT_LOAD_HOST_PDPTE_FAIL       2
-#define VMX_ABORT_VMCS_CORRUPTED             3
 #define VMX_ABORT_LOAD_HOST_MSR_FAIL         4
 
 #endif /* _UAPIVMX_H */
arch/x86/kvm/vmx/nested.c +23 -21

68 lines not on this page · raw message

Signature · 1 line
2.20.1
author maintainer
#112 lore raw

PATCH 108/171 RDMA/i40iw: Set queue pair state when being queried

In reply to Sasha Levin

From: "Liu, Changcheng" <[email protected]>

[ Upstream commit 2e67e775845373905d2c2aecb9062c2c4352a535 ]

The API for ib_query_qp requires the driver to set qp_state and cur_qp_state on return, add the missing sets.

Fixes d37498417947 ("i40iw: add files for iwarp interface")
---
 drivers/infiniband/hw/i40iw/i40iw_verbs.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/infiniband/hw/i40iw/i40iw_verbs.c +2 -0
index 5689d742bafb..4c88d6f72574 100644
@@ -772,6 +772,8 @@ static int i40iw_query_qp(struct ib_qp *ibqp,
 	struct i40iw_qp *iwqp = to_iwqp(ibqp);
 	struct i40iw_sc_qp *qp = &iwqp->sc_qp;
 
+	attr->qp_state = iwqp->ibqp_state;
+	attr->cur_qp_state = attr->qp_state;
 	attr->qp_access_flags = 0;
 	attr->cap.max_send_wr = qp->qp_uk.sq_size;
 	attr->cap.max_recv_wr = qp->qp_uk.rq_size;
Signature · 1 line
2.20.1
author maintainer
#104 lore raw

PATCH 100/171 mfd: arizona: Fix undefined behavior

In reply to Sasha Levin

From: Arnd Bergmann <[email protected]>

[ Upstream commit 5da6cbcd2f395981aa9bfc571ace99f1c786c985 ]

When the driver is used with a subdevice that is disabled in the kernel configuration, clang gets a little confused about the control flow and fails to notice that n_subdevs is only uninitialized when subdevs is NULL, and we check for that, leading to a false-positive warning:

drivers/mfd/arizona-core.c:1423:19: error: variable 'n_subdevs' is uninitialized when used here

      [-Werror,-Wuninitialized]
                              subdevs, n_subdevs, NULL, 0, NULL);
                                       ^~~~~~~~~
drivers/mfd/arizona-core.c:999:15: note: initialize the variable 'n_subdevs' to silence this warning
        int n_subdevs, ret, i;
                     ^
                      = 0

Ideally, we would rearrange the code to avoid all those early initializations and have an explicit exit in each disabled case, but it's much easier to chicken out and add one more initialization here to shut up the warning.

---
 drivers/mfd/arizona-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/mfd/arizona-core.c +1 -1
index 2bdc7b02157a..4a31907a4525 100644
@@ -993,7 +993,7 @@ int arizona_dev_init(struct arizona *arizona)
 	unsigned int reg, val;
 	int (*apply_patch)(struct arizona *) = NULL;
 	const struct mfd_cell *subdevs = NULL;
-	int n_subdevs, ret, i;
+	int n_subdevs = 0, ret, i;
 
 	dev_set_drvdata(arizona->dev, arizona);
 	mutex_init(&arizona->clk_lock);
Signature · 1 line
2.20.1
author maintainer
#103 lore raw

PATCH 99/171 mfd: core: Set fwnode for created devices

In reply to Sasha Levin

From: Robert Hancock <[email protected]>

[ Upstream commit c176c6d7e932662668bcaec2d763657096589d85 ]

The logic for setting the of_node on devices created by mfd did not set the fwnode pointer to match, which caused fwnode-based APIs to malfunction on these devices since the fwnode pointer was null. Fix this.

---
 drivers/mfd/mfd-core.c | 1 +
 1 file changed, 1 insertion(+)
drivers/mfd/mfd-core.c +1 -0
index dbf684c4ebfb..23276a80e3b4 100644
@@ -175,6 +175,7 @@ static int mfd_add_device(struct device *parent, int id,
 		for_each_child_of_node(parent->of_node, np) {
 			if (of_device_is_compatible(np, cell->of_compatible)) {
 				pdev->dev.of_node = np;
+				pdev->dev.fwnode = &np->fwnode;
 				break;
 			}
 		}
Signature · 1 line
2.20.1
author maintainer
#105 lore raw

PATCH 101/171 mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk

In reply to Sasha Levin

From: Axel Lin <[email protected]>

[ Upstream commit 7efd105c27fd2323789b41b64763a0e33ed79c08 ]

Since devm_regmap_init_mmio_clk can fail, add return value checking.

---
 drivers/mfd/hi655x-pmic.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/mfd/hi655x-pmic.c +2 -0
index f1c51ce309fa..7e3959aaa285 100644
@@ -109,6 +109,8 @@ static int hi655x_pmic_probe(struct platform_device *pdev)
 
 	pmic->regmap = devm_regmap_init_mmio_clk(dev, NULL, base,
 						 &hi655x_regmap_config);
+	if (IS_ERR(pmic->regmap))
+		return PTR_ERR(pmic->regmap);
 
 	regmap_read(pmic->regmap, HI655X_BUS_ADDR(HI655X_VER_REG), &pmic->ver);
 	if ((pmic->ver < PMU_VER_START) || (pmic->ver > PMU_VER_END)) {
Signature · 1 line
2.20.1
author maintainer
#100 lore raw

PATCH 96/171 recordmcount: Fix spurious mcount entries on powerpc

In reply to Sasha Levin

From: "Naveen N. Rao" <[email protected]>

[ Upstream commit 80e5302e4bc85a6b685b7668c36c6487b5f90e9a ]

An impending change to enable HAVE_C_RECORDMCOUNT on powerpc leads to warnings such as the following:

  # modprobe kprobe_example
  ftrace-powerpc: Not expected bl: opcode is 3c4c0001
  WARNING: CPU: 0 PID: 227 at kernel/trace/ftrace.c:2001 ftrace_bug+0x90/0x318
  Modules linked in:
  CPU: 0 PID: 227 Comm: modprobe Not tainted 5.2.0-rc6-00678-g1c329100b942 #2
  NIP:  c000000000264318 LR: c00000000025d694 CTR: c000000000f5cd30
  REGS: c000000001f2b7b0 TRAP: 0700   Not tainted  (5.2.0-rc6-00678-g1c329100b942)
  MSR:  900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]>  CR: 28228222  XER: 00000000
  CFAR: c0000000002642fc IRQMASK: 0
  <snip>
  NIP [c000000000264318] ftrace_bug+0x90/0x318
  LR [c00000000025d694] ftrace_process_locs+0x4f4/0x5e0
  Call Trace:
  [c000000001f2ba40] [0000000000000004] 0x4 (unreliable)
  [c000000001f2bad0] [c00000000025d694] ftrace_process_locs+0x4f4/0x5e0
  [c000000001f2bb90] [c00000000020ff10] load_module+0x25b0/0x30c0
  [c000000001f2bd00] [c000000000210cb0] sys_finit_module+0xc0/0x130
  [c000000001f2be20] [c00000000000bda4] system_call+0x5c/0x70
  Instruction dump:
  419e0018 2f83ffff 419e00bc 2f83ffea 409e00cc 4800001c 0fe00000 3c62ff96
  39000001 39400000 386386d0 480000c4 <0fe00000> 3ce20003 39000001 3c62ff96
  ---[ end trace 4c438d5cebf78381 ]---
  ftrace failed to modify
  [<c0080000012a0008>] 0xc0080000012a0008
   actual:   01:00:4c:3c
  Initializing ftrace call sites
  ftrace record flags: 2000000
   (0)
   expected tramp: c00000000006af4c

Looking at the relocation records in __mcount_loc shows a few spurious entries:

RELOCATION RECORDS FOR [__mcount_loc]:

  OFFSET           TYPE              VALUE
  0000000000000000 R_PPC64_ADDR64    .text.unlikely+0x0000000000000008
  0000000000000008 R_PPC64_ADDR64    .text.unlikely+0x0000000000000014
  0000000000000010 R_PPC64_ADDR64    .text.unlikely+0x0000000000000060
  0000000000000018 R_PPC64_ADDR64    .text.unlikely+0x00000000000000b4
  0000000000000020 R_PPC64_ADDR64    .init.text+0x0000000000000008
  0000000000000028 R_PPC64_ADDR64    .init.text+0x0000000000000014

The first entry in each section is incorrect. Looking at the relocation records, the spurious entries correspond to the R_PPC64_ENTRY records:

RELOCATION RECORDS FOR [.text.unlikely]:

  OFFSET           TYPE              VALUE
  0000000000000000 R_PPC64_REL64     .TOC.-0x0000000000000008
  0000000000000008 R_PPC64_ENTRY     *ABS*
  0000000000000014 R_PPC64_REL24     _mcount

<snip>

The problem is that we are not validating the return value from get_mcountsym() in sift_rel_mcount(). With this entry, mcountsym is 0, but Elf_r_sym(relp) also ends up being 0. Fix this by ensuring mcountsym is valid before processing the entry.

---
 scripts/recordmcount.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
scripts/recordmcount.h +2 -1
index 13c5e6c8829c..47fca2c69a73 100644
@@ -325,7 +325,8 @@ static uint_t *sift_rel_mcount(uint_t *mlocp,
 		if (!mcountsym)
 			mcountsym = get_mcountsym(sym0, relp, str0);
 
-		if (mcountsym == Elf_r_sym(relp) && !is_fake_mcount(relp)) {
+		if (mcountsym && mcountsym == Elf_r_sym(relp) &&
+				!is_fake_mcount(relp)) {
 			uint_t const addend =
 				_w(_w(relp->r_offset) - recval + mcount_adjust);
 			mrelp->r_offset = _w(offbase
Signature · 1 line
2.20.1
author maintainer
#101 lore raw

PATCH 97/171 mfd: cros_ec: Register cros_ec_lid_angle driver when presented

In reply to Sasha Levin

From: Gwendal Grignou <[email protected]>

[ Upstream commit 1bb407f17c5316888c3c446e26cb2bb78943f236 ]

Register driver when EC indicates has precise lid angle calculation code running.
Fix incorrect extra resource allocation in cros_ec_sensors_register().

---
 drivers/mfd/cros_ec_dev.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)
drivers/mfd/cros_ec_dev.c +10 -3
index a5391f96eafd..607383b67cf1 100644
@@ -285,13 +285,15 @@ static void cros_ec_sensors_register(struct cros_ec_dev *ec)
 
 	resp = (struct ec_response_motion_sense *)msg->data;
 	sensor_num = resp->dump.sensor_count;
-	/* Allocate 1 extra sensors in FIFO are needed */
-	sensor_cells = kcalloc(sensor_num + 1, sizeof(struct mfd_cell),
+	/*
+	 * Allocate 2 extra sensors if lid angle sensor and/or FIFO are needed.
+	 */
+	sensor_cells = kcalloc(sensor_num + 2, sizeof(struct mfd_cell),
 			       GFP_KERNEL);
 	if (sensor_cells == NULL)
 		goto error;
 
-	sensor_platforms = kcalloc(sensor_num + 1,
+	sensor_platforms = kcalloc(sensor_num,
 				   sizeof(struct cros_ec_sensor_platform),
 				   GFP_KERNEL);
 	if (sensor_platforms == NULL)
@@ -351,6 +353,11 @@ static void cros_ec_sensors_register(struct cros_ec_dev *ec)
 		sensor_cells[id].name = "cros-ec-ring";
 		id++;
 	}
+	if (cros_ec_check_features(ec,
+				EC_FEATURE_REFINED_TABLET_MODE_HYSTERESIS)) {
+		sensor_cells[id].name = "cros-ec-lid-angle";
+		id++;
+	}
 
 	ret = mfd_add_devices(ec->dev, 0, sensor_cells, id,
 			      NULL, 0, NULL);
Signature · 1 line
2.20.1
author maintainer
#93 lore raw

PATCH 89/171 PCI: xilinx-nwl: Fix Multi MSI data programming

In reply to Sasha Levin

From: Bharat Kumar Gogada <[email protected]>

[ Upstream commit 181fa434d0514e40ebf6e9721f2b72700287b6e2 ]

According to the PCI Local Bus specification Revision 3.0, section 6.8.1.3 (Message Control for MSI), endpoints that are Multiple Message Capable as defined by bits [3:1] in the Message Control for MSI can request a number of vectors that is power of two aligned.

As specified in section 6.8.1.6 "Message data for MSI", the Multiple Message Enable field (bits [6:4] of the Message Control register) defines the number of low order message data bits the function is permitted to modify to generate its system software allocated vectors.

The MSI controller in the Xilinx NWL PCIe controller supports a number of MSI vectors specified through a bitmap and the hwirq number for an MSI, that is the value written in the MSI data TLP is determined by the bitmap allocation.

For instance, in a situation where two endpoints sitting on the PCI bus request the following MSI configuration, with the current PCI Xilinx bitmap allocation code (that does not align MSI vector allocation on a power of two boundary):

Endpoint #1: Requesting 1 MSI vector - allocated bitmap bits 0 Endpoint #2: Requesting 2 MSI vectors - allocated bitmap bits [1,2]

The bitmap value(s) corresponds to the hwirq number that is programmed into the Message Data for MSI field in the endpoint MSI capability and is detected by the root complex to fire the corresponding MSI irqs. The value written in Message Data for MSI field corresponds to the first bit allocated in the bitmap for Multi MSI vectors.

The current Xilinx NWL MSI allocation code allows a bitmap allocation that is not a power of two boundaries, so endpoint #2, is allowed to toggle Message Data bit[0] to differentiate between its two vectors (meaning that the MSI data will be respectively 0x0 and 0x1 for the two vectors allocated to endpoint #2).

This clearly aliases with the Endpoint #1 vector allocation, resulting in a broken Multi MSI implementation.

Update the code to allocate MSI bitmap ranges with a power of two alignment, fixing the bug.

Fixes ab597d35ef11 ("PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller")
[[email protected]: updated commit log]
---
 drivers/pci/controller/pcie-xilinx-nwl.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/pci/controller/pcie-xilinx-nwl.c +5 -6
index 3b031f00a94a..45c0f344ccd1 100644
@@ -482,15 +482,13 @@ static int nwl_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
 	int i;
 
 	mutex_lock(&msi->lock);
-	bit = bitmap_find_next_zero_area(msi->bitmap, INT_PCI_MSI_NR, 0,
-					 nr_irqs, 0);
-	if (bit >= INT_PCI_MSI_NR) {
+	bit = bitmap_find_free_region(msi->bitmap, INT_PCI_MSI_NR,
+				      get_count_order(nr_irqs));
+	if (bit < 0) {
 		mutex_unlock(&msi->lock);
 		return -ENOSPC;
 	}
 
-	bitmap_set(msi->bitmap, bit, nr_irqs);
-
 	for (i = 0; i < nr_irqs; i++) {
 		irq_domain_set_info(domain, virq + i, bit + i, &nwl_irq_chip,
 				domain->host_data, handle_simple_irq,
@@ -508,7 +506,8 @@ static void nwl_irq_domain_free(struct irq_domain *domain, unsigned int virq,
 	struct nwl_msi *msi = &pcie->msi;
 
 	mutex_lock(&msi->lock);
-	bitmap_clear(msi->bitmap, data->hwirq, nr_irqs);
+	bitmap_release_region(msi->bitmap, data->hwirq,
+			      get_count_order(nr_irqs));
 	mutex_unlock(&msi->lock);
 }
 
Signature · 1 line
2.20.1
author maintainer
#88 lore raw

PATCH 84/171 iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions

In reply to Sasha Levin

From: Alexandru Ardelean <[email protected]>

[ Upstream commit 05b8bcc96278c9ef927a6f25a98e233e55de42e1 ]

The iio_triggered_buffer_{predisable,postenable} functions attach/detach the poll functions.

For the predisable hook, the disable code should occur before detaching the poll func, and for the postenable hook, the poll func should be attached before the enable code.

---
 drivers/iio/accel/st_accel_buffer.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)
drivers/iio/accel/st_accel_buffer.c +13 -9
index 54f2ae91f614..0205c0167cdd 100644
@@ -45,17 +45,19 @@ static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
 		goto allocate_memory_error;
 	}
 
-	err = st_sensors_set_axis_enable(indio_dev,
-					(u8)indio_dev->active_scan_mask[0]);
+	err = iio_triggered_buffer_postenable(indio_dev);
 	if (err < 0)
 		goto st_accel_buffer_postenable_error;
 
-	err = iio_triggered_buffer_postenable(indio_dev);
+	err = st_sensors_set_axis_enable(indio_dev,
+					(u8)indio_dev->active_scan_mask[0]);
 	if (err < 0)
-		goto st_accel_buffer_postenable_error;
+		goto st_sensors_set_axis_enable_error;
 
 	return err;
 
+st_sensors_set_axis_enable_error:
+	iio_triggered_buffer_predisable(indio_dev);
 st_accel_buffer_postenable_error:
 	kfree(adata->buffer_data);
 allocate_memory_error:
@@ -64,20 +66,22 @@ static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
 
 static int st_accel_buffer_predisable(struct iio_dev *indio_dev)
 {
-	int err;
+	int err, err2;
 	struct st_sensor_data *adata = iio_priv(indio_dev);
 
-	err = iio_triggered_buffer_predisable(indio_dev);
-	if (err < 0)
-		goto st_accel_buffer_predisable_error;
-
 	err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
 	if (err < 0)
 		goto st_accel_buffer_predisable_error;
 
 	err = st_sensors_set_enable(indio_dev, false);
+	if (err < 0)
+		goto st_accel_buffer_predisable_error;
 
 st_accel_buffer_predisable_error:
+	err2 = iio_triggered_buffer_predisable(indio_dev);
+	if (!err)
+		err = err2;
+
 	kfree(adata->buffer_data);
 	return err;
 }
Signature · 1 line
2.20.1
author maintainer
#84 lore raw

PATCH 80/171 staging: ks7010: Fix build error

In reply to Sasha Levin

From: YueHaibing <[email protected]>

[ Upstream commit 3e5bc68fa596874500e8c718605aa44d5e42a34c ]

when CRYPTO is m and KS7010 is y, building fails:

drivers/staging/ks7010/ks_hostif.o: In function `michael_mic.constprop.13':
ks_hostif.c:(.text+0x560): undefined reference to crypto_alloc_shash' ks_hostif.c:(.text+0x580): undefined reference to crypto_shash_setkey' ks_hostif.c:(.text+0x5e0): undefined reference to crypto_destroy_tfm' ks_hostif.c:(.text+0x614): undefined reference to crypto_shash_update' ks_hostif.c:(.text+0x62c): undefined reference to crypto_shash_update' ks_hostif.c:(.text+0x648): undefined reference to crypto_shash_finup'

Add CRYPTO and CRYPTO_HASH dependencies to fix this.

Fixes 8b523f20417d ("staging: ks7010: removed custom Michael MIC implementation.")
---
 drivers/staging/ks7010/Kconfig | 1 +
 1 file changed, 1 insertion(+)
drivers/staging/ks7010/Kconfig +1 -0
index 0987fdc2f70d..9d7cbc8b12df 100644
@@ -5,6 +5,7 @@ config KS7010
 	select WIRELESS_EXT
 	select WEXT_PRIV
 	select FW_LOADER
+	depends on CRYPTO && CRYPTO_HASH
 	help
 	  This is a driver for KeyStream KS7010 based SDIO WIFI cards. It is
 	  found on at least later Spectec SDW-821 (FCC-ID "S2Y-WLAN-11G-K" only,
Signature · 1 line
2.20.1