watchdog device drivers:pc87413_wdt:Rewriting of pc87413_wdt driver to utilize common watchdog interface
Subsystems (3)
PATCH 1/4 watchdog device drivers:pc87413_wdt:Rewriting of pc87413_wdt driver to utilize common watchdog interface
There is a potential for the variable swc_base_addr in the call chain of the driver initialization function (init) to be used before initialization. This brought up the need for, by rewriting the driver to use the common watchdog interface, ensuring to have all resources in place. This patch addresses this need by rewriting into common watchdog interface utilization for the driver.
--- drivers/media/pci/tw686x/Kconfig | 1 + drivers/watchdog/pc87413_wdt.c | 92 +++++++++++++++----------------- 2 files changed, 45 insertions(+), 48 deletions(-)
drivers/media/pci/tw686x/Kconfig +1 -0
@@ -5,6 +5,7 @@ config VIDEO_TW686X select VIDEOBUF2_DMA_CONTIG select VIDEOBUF2_DMA_SG select SND_PCM + select WATCHDOG_CORE help Support for Intersil/Techwell TW686x-based frame grabber cards.
drivers/watchdog/pc87413_wdt.c +44 -48
196 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH 2/4 watchdog device drivers:pc87413_wdt:Rewriting of pc87413_wdt driver to utilize common watchdog interface, with removal of file access functions for correct functionality
There is a potential for the variable swc_base_addr in the call chain of the driver initialization function (init) to be used before initialization. This brought up the need for, by rewriting the driver to use the common watchdog interface, ensuring to have all resources in place. This patch addresses this need by rewriting into common watchdog interface utilization for the driver.
--- drivers/watchdog/pc87413_wdt.c | 235 +++------------------------------ 1 file changed, 22 insertions(+), 213 deletions(-)
drivers/watchdog/pc87413_wdt.c +22 -213
@@ -217,37 +217,28 @@ static inline void pc87413_disable_sw_wd_trg(void)static void pc87413_start (void ) { -spin_lock (&io_lock); -pc87413_swc_bank3 ();pc87413_programm_wdto (timeout);pc87413_enable_wden ();pc87413_enable_sw_wd_tren ();pc87413_enable_sw_wd_trg (); -spin_unlock (&io_lock); }/* Disable/stop the watchdog */ static void pc87413_stop (void ) { -spin_lock (&io_lock); -pc87413_swc_bank3 ();pc87413_disable_sw_wd_tren ();pc87413_disable_sw_wd_trg ();pc87413_programm_wdto (0 ); - -spin_unlock (&io_lock); }/* Refresh/keepalive the watchdog */ static void pc87413_keepalive (struct watchdog_device *wdd) { -spin_lock (&io_lock); -pc87413_swc_bank3 ();pc87413_disable_sw_wd_tren ();pc87413_disable_sw_wd_trg ();
@@ -255,192 +246,11 @@ static void pc87413_keepalive(struct watchdog_device *wdd)pc87413_enable_wden ();pc87413_enable_sw_wd_tren ();pc87413_enable_sw_wd_trg (); - -spin_unlock (&io_lock); -return 0 ; } -/* -- File operations -------------------------------------------*/ - -/** -* pc87413_open: -* @inode: inode of device -* @file: file handle to device -* -*/ - -static int pc87413_open (struct inode *inode,struct file *file) -{ -/* /dev/watchdog can only be opened once */ - -if (test_and_set_bit (0 , &timer_enabled)) -return -EBUSY ; -/* Reload and activate timer */ -pc87413_refresh (); - -pr_info ("Watchdog enabled. Timeout set to %d minute(s).\n" , timeout); - -return nonseekable_open (inode, file); -} - -/** -* pc87413_release: -* @inode: inode to board -* @file: file handle to board -* -* The watchdog has a configurable API. There is a religious dispute -* between people who want their watchdog to be able to shut down and -* those who want to be sure if the watchdog manager dies the machine -* reboots. In the former case we disable the counters, in the latter -* case you have to open it again very soon. -*/ - -static int pc87413_release (struct inode *inode,struct file *file) -{ -/* Shut off the timer. */ - -if (expect_close ==42 ) { -pc87413_disable (); -pr_info ("Watchdog disabled, sleeping again...\n" ); - }else { -pr_crit ("Unexpected close, not stopping watchdog!\n" ); -pc87413_refresh (); - } -clear_bit (0 , &timer_enabled); - expect_close =0 ; -return 0 ; -} - -/** -* pc87413_status: -* -* return, if the watchdog is enabled (timeout is set...) -*/ - - -static int pc87413_status (void ) -{ -return 0 ;/* currently not supported */ -} - -/** -* pc87413_write: -* @data: data buffer to write -* @len: length in bytes -* @ppos: pointer to the position to write. No seeks allowed -* -* A write to a watchdog device is defined as a keepalive signal. Any -* write of data will do, as we we don't define content meaning. -*/ - -static ssize_t pc87413_write (struct file *file,const char __user *data, -size_t len,loff_t *ppos) -{ -/* See if we got the magic character 'V' and reload the timer */ -if (len) { -size_t i; - -/* reset expect flag */ - expect_close =0 ; - -/* scan to see whether or not we got the -magic character */ -for (i =0 ; i != len; i++) { -char c; -if (get_user (c, data + i)) -return -EFAULT ; -if (c =='V' ) - expect_close =42 ; - } - } - -/* someone wrote to us, we should reload the timer */ -pc87413_refresh (); - -return len; -} - -/** -* pc87413_ioctl: -* @file: file handle to the device -* @cmd: watchdog command -* @arg: argument pointer -* -* The watchdog API defines a common set of functions for all watchdogs -* according to their available features. We only actually usefully support -* querying capabilities and current status. -*/ - -static long pc87413_ioctl (struct file *file,unsigned int cmd, -unsigned long arg) -{ -int new_timeout; - -union { -struct watchdog_info __user *ident; -int __user *i; - } uarg; - -static const struct watchdog_info ident = { - .options =WDIOF_KEEPALIVEPING | -WDIOF_SETTIMEOUT | -WDIOF_MAGICCLOSE , - .firmware_version =1 , - .identity ="PC87413(HF/F) watchdog" , - }; - - uarg.i = (int __user *)arg; - -switch (cmd) { -case WDIOC_GETSUPPORT : -return copy_to_user (uarg.ident, &ident, -sizeof (ident)) ? -EFAULT :0 ; -case WDIOC_GETSTATUS : -return put_user (pc87413_status (), uarg.i); -case WDIOC_GETBOOTSTATUS : -return put_user (0 , uarg.i); -case WDIOC_SETOPTIONS : - { -int options, retval = -EINVAL ; -if (get_user (options, uarg.i)) -return -EFAULT ; -if (options &WDIOS_DISABLECARD ) { -pc87413_disable (); - retval =0 ; - } -if (options &WDIOS_ENABLECARD ) { -pc87413_start (); - retval =0 ; - } -return retval; - } -case WDIOC_KEEPALIVE : -pc87413_refresh (); -#ifdef DEBUG -pr_info (DPFX "keepalive\n" ); -#endif -return 0 ; -case WDIOC_SETTIMEOUT : -if (get_user (new_timeout, uarg.i)) -return -EFAULT ; -/* the API states this is given in secs */ - new_timeout /=60 ; -if (new_timeout <0 || new_timeout >MAX_TIMEOUT ) -return -EINVAL ; - timeout = new_timeout; -pc87413_refresh (); -/* fall through and return the new timeout... */ -case WDIOC_GETTIMEOUT : - new_timeout = timeout *60 ; -return put_user (new_timeout, uarg.i); -default : -return -ENOTTY ; - } -} - -/* -- Notifier funtions -----------------------------------------*/ +/* -- Notifier functions -----------------------------------------*/ /** * notify_sys:
@@ -454,22 +264,28 @@ static long pc87413_ioctl(struct file *file, unsigned int cmd,* trust me - if it happens it does suck. */ -static int pc87413_notify_sys (struct notifier_block *this, -unsigned long code, -void *unused) + +/* -- Module's structures ---------------------------------------*/ + + +static int watchdog_restart_notifier (struct notifier_block *nb, +unsigned long code,void *data) { -if (code ==SYS_DOWN || code ==SYS_HALT ) -/* Turn the card off */ -pc87413_stop (); + struct watchdog_device *wdd = container_of(nb, struct watchdog_device, + reboot_nb); + +if (code ==SYS_DOWN || code ==SYS_HALT ) { +int ret; + + ret = wdd->ops->stop (wdd); +if (ret) +return NOTIFY_BAD ; + } +return NOTIFY_DONE ; } -/* -- Module's structures ---------------------------------------*/ - -static struct notifier_block pc87413wdt_notifier = { - .notifier_call = pc87413_notify_sys, -};static struct watchdog_ops pc87413wdt_ops = { .owner =THIS_MODULE ,
@@ -482,7 +298,9 @@ static struct watchdog_ops pc87413wdt_ops = {static struct watchdog_device pc87413wdt_wdd = { .info = &pc87413wdt_ident, .ops = &pc87413wdt_ops, - .status =WATCHDOG_NOWAYOUT_INIT_STATUS + .status =WATCHDOG_NOWAYOUT_INIT_STATUS , + .exit = pc87413_exit, + .restart = watchdog_restart_notifier, };
@@ -493,7 +311,6 @@ static struct watchdog_device pc87413wdt_wdd = {* * Set up the WDT watchdog board. All we have to do is grab the * resources we require and bitch if anyone beat us to them. -* The open() function will actually kick the board off. */ static int __init pc87413_init (void )
@@ -528,8 +345,6 @@ static int __init pc87413_init(void) goto misc_unreg; } -pc87413_start (); -release_region (io,2 );pc87413_keepalive (&pc87413wdt_wdd);return 0 ;
@@ -554,13 +369,7 @@ reboot_unreg: static void __exit pc87413_exit(void) { -/* Stop the timer before we leave */ -if (!nowayout) { -pc87413_disable (); -pr_info ("Watchdog disabled\n" ); - } - -misc_deregister (&pc87413_miscdev); +watchdog_unregister_device (&pc87413wdt_wdd);unregister_reboot_notifier (&pc87413_notifier);release_region (swc_base_addr,0x20 );
Signature · 1 line
2.17.1
PATCH 3/4 watchdog device drivers:pc87413_wdt: Tidying up conversion of pc87413_wdt driver to common watchdog interface, removal of some stray nowayout parameters
In reply to Mark BalantzyanThere is a potential for the variable swc_base_addr in the call chain of the driver initialization function (init) to be used before initialization. This brought up the need for, by rewriting the driver to use the common watchdog interface, ensuring to have all resources in place. This patch addresses this need by rewriting into common watchdog interface utilization for the driver.
--- drivers/watchdog/pc87413_wdt.c | 6 ------ 1 file changed, 6 deletions(-)
drivers/watchdog/pc87413_wdt.c +0 -6
@@ -392,9 +392,3 @@ module_param(timeout, int, 0);MODULE_PARM_DESC (timeout, "Watchdog timeout in minutes (default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")."); - -module_param (nowayout, bool,0 ); -MODULE_PARM_DESC (nowayout, - "Watchdog cannot be stopped once started (default=" - __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -
Signature · 1 line
2.17.1
Guenter Roeck
maintainerRe: [PATCH 3/4] watchdog device drivers:pc87413_wdt: Tidying up conversion of pc87413_wdt driver to common watchdog interface, removal of some stray nowayout parameters
Quoted 18 lines · Mark Balantzyan
There is a potential for the variable
swc_base_addrin the call chain of the driver initialization function (init) to be used before initialization. This brought up the need for, by rewriting the driver to use the common watchdog interface, ensuring to have all resources in place. This patch addresses this need by rewriting into common watchdog interface utilization for the driver.Signed-off-by Mark Balantzyan <[email protected]>--- drivers/watchdog/pc87413_wdt.c | 6 ------ 1 file changed, 6 deletions(-)drivers/watchdog/pc87413_wdt.c +0
-0
drivers/watchdog/pc87413_wdt.c module_param(timeout, int, 0); · line 400
Quoted 9 lines
drivers/watchdog/pc87413_wdt.c +0
-6@@ -392,9 +392,3 @@ module_param(timeout, int, 0);MODULE_PARM_DESC (timeout, "Watchdog timeout in minutes (default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")."); - -module_param (nowayout, bool,0 ); -MODULE_PARM_DESC(nowayout,watchdog_set_nowayout - "Watchdog cannot be stopped once started (default=" - __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -
Why would you no longer want this module parameter ?
You should keep it and call watchdog_set_nowayout(wdev, nowayout); in the probe function.
Guenter
PATCH 4/4 watchdog device drivers:pc87413_wdt: Continuing revision of conversion of pc87413_wdt to use common watchdog interface, removed undeclared identifiers
In reply to Mark BalantzyanThere is a potential for the variable swc_base_addr in the call chain of the driver initialization function (init) to be used before initialization. This brought up the need for, by rewriting the driver to use the common watchdog interface, ensuring to have all resources in place. This patch addresses this need by rewriting into common watchdog interface utilization for the driver.
--- drivers/watchdog/pc87413_wdt.c | 1 - 1 file changed, 1 deletion(-)
drivers/watchdog/pc87413_wdt.c +0 -1
@@ -370,7 +370,6 @@ reboot_unreg: static void __exit pc87413_exit(void) {watchdog_unregister_device (&pc87413wdt_wdd); -unregister_reboot_notifier (&pc87413_notifier);release_region (swc_base_addr,0x20 );pr_info ("watchdog component driver removed\n" );
Signature · 1 line
2.17.1
Guenter Roeck
maintainerRe: [PATCH 4/4] watchdog device drivers:pc87413_wdt: Continuing revision of conversion of pc87413_wdt to use common watchdog interface, removed undeclared identifiers
Quoted 17 lines · Mark Balantzyan
There is a potential for the variable
swc_base_addrin the call chain of the driver initialization function (init) to be used before initialization. This brought up the need for, by rewriting the driver to use the common watchdog interface, ensuring to have all resources in place. This patch addresses this need by rewriting into common watchdog interface utilization for the driver.Signed-off-by Mark Balantzyan <[email protected]>--- drivers/watchdog/pc87413_wdt.c | 1 - 1 file changed, 1 deletion(-)drivers/watchdog/pc87413_wdt.c +0
-0
drivers/watchdog/pc87413_wdt.c reboot_unreg: · line 373
Quoted 4 lines
drivers/watchdog/pc87413_wdt.c +0
-1@@ -370,7 +370,6 @@ reboot_unreg: static void __exit pc87413_exit(void) {watchdog_unregister_device (&pc87413wdt_wdd); -unregister_reboot_notifier (&pc87413_notifier);
This needs to be in patch 2.
Quoted 4 lines
drivers/watchdog/pc87413_wdt.c +0
-0release_region (swc_base_addr,0x20 );pr_info ("watchdog component driver removed\n" );
Guenter Roeck
maintainerQuoted 6 lines · Mark Balantzyan
There is a potential for the variable
swc_base_addrin the call chain of the driver initialization function (init) to be used before initialization. This brought up the need for, by rewriting the driver to use the common watchdog interface, ensuring to have all resources in place. This patch addresses this need by rewriting into common watchdog interface utilization for the driver.
First, those four patches should be just one. Splitting them into four just makes review more difficult.
Second, the potential race is not the key change, even though it may have triggered it. Just describe the change, ie the rework to the watchdog API.
Then add that this also resolves a race condition.
Also see inline.
Thanks,
Guenter
Quoted 150 lines
Signed-off-by Mark Balantzyan <[email protected]>--- drivers/media/pci/tw686x/Kconfig | 1 + drivers/watchdog/pc87413_wdt.c | 92 +++++++++++++++----------------- 2 files changed, 45 insertions(+), 48 deletions(-)drivers/media/pci/tw686x/Kconfig +1
-0@@ -5,6 +5,7 @@ config VIDEO_TW686X select VIDEOBUF2_DMA_CONTIG select VIDEOBUF2_DMA_SG select SND_PCM + select WATCHDOG_CORE help Support for Intersil/Techwell TW686x-based frame grabber cards.drivers/watchdog/pc87413_wdt.c +24
-30@@ -22,12 +22,10 @@#include <linux/module.h> #include <linux/types.h> -#include <linux/miscdevice.h> #include <linux/watchdog.h> #include <linux/ioport.h> #include <linux/delay.h> #include <linux/notifier.h> -#include <linux/fs.h> #include <linux/reboot.h> #include <linux/init.h> #include <linux/spinlock.h> @@ -65,7 +63,6 @@ static char expect_close; /* is the close expected? */static DEFINE_SPINLOCK (io_lock);/* to guard us from io races */ -static bool nowayout =WATCHDOG_NOWAYOUT ;/* -- Low level function ----------------------------------------*/ @@ -216,9 +213,9 @@ static inline void pc87413_disable_sw_wd_trg(void)/* -- Higher level functions ------------------------------------*/ -/* Enable the watchdog */ +/* Enable/start the watchdog */ -static void pc87413_enable (void ) +static void pc87413_start (void ) {spin_lock (&io_lock);@@ -231,9 +228,9 @@ static void pc87413_enable(void)spin_unlock (&io_lock); } -/* Disable the watchdog */ +/* Disable/stop the watchdog */ -static void pc87413_disable (void ) +static void pc87413_stop (void ) {spin_lock (&io_lock);@@ -245,9 +242,9 @@ static void pc87413_disable(void)spin_unlock (&io_lock); } -/* Refresh the watchdog */ +/* Refresh/keepalive the watchdog */ -static void pc87413_refresh (void ) +static void pc87413_keepalive (struct watchdog_device *wdd) {spin_lock (&io_lock);@@ -260,6 +257,8 @@ static void pc87413_refresh(void)pc87413_enable_sw_wd_trg ();spin_unlock (&io_lock); + +return 0 ; }/* -- File operations -------------------------------------------*/ @@ -278,9 +277,6 @@ static int pc87413_open(struct inode *inode, struct file *file)if (test_and_set_bit (0 , &timer_enabled))return -EBUSY ; -if (nowayout) -__module_get (THIS_MODULE ); -/* Reload and activate timer */ pc87413_refresh ();@@ -331,7 +327,6 @@ static int pc87413_status(void)/** * pc87413_write: -* @file: file handle to the watchdog * @data: data buffer to write * @len: length in bytes * @ppos: pointer to the position to write. No seeks allowed @@ -345,26 +340,25 @@ static ssize_t pc87413_write(struct file *file, const char __user *data, {/* See if we got the magic character 'V' and reload the timer */ if (len) { -if (!nowayout) { -size_t i; - -/* reset expect flag */ - expect_close =0 ; - -/* scan to see whether or not we got the -magic character */ -for (i =0 ; i != len; i++) { -char c; -if (get_user (c, data + i)) -return -EFAULT ; -if (c =='V' ) - expect_close =42 ; - } +size_t i; + +/* reset expect flag */ + expect_close =0 ; + +/* scan to see whether or not we got the +magic character */ +for (i =0 ; i != len; i++) { +char c; +if (get_user (c, data + i)) +return -EFAULT ; +if (c =='V' ) + expect_close =42 ; } + }/* someone wrote to us, we should reload the timer */ -pc87413_refresh (); - } +pc87413_refresh (); +return len; }
drivers/watchdog/pc87413_wdt.c static long pc87413_ioctl(struct file *file, unsigned int cmd, · line 414
Quoted 5 lines
drivers/watchdog/pc87413_wdt.c +1
-1@@ -417,7 +411,7 @@ static long pc87413_ioctl(struct file *file, unsigned int cmd, retval =0 ; }if (options &WDIOS_ENABLECARD ) { -pc87413_enable (); +pc87413_start ();
This is where things get confusing. This function is removed in the next patch. Plus, it should be removed here, as you remove pc87413_fops below.
Why bother changing it only to remove it later ?
drivers/watchdog/pc87413_wdt.c static int pc87413_notify_sys(struct notifier_block *this, · line 463
Quoted 9 lines
drivers/watchdog/pc87413_wdt.c +1
-1retval =0 ; }return retval;@@ -466,31 +460,32 @@ static int pc87413_notify_sys(struct notifier_block *this, {if (code ==SYS_DOWN || code ==SYS_HALT )/* Turn the card off */ -pc87413_disable (); +pc87413_stop ();
This can be accomplished by calling watchdog_stop_on_reboot() in the probe function.
Quoted 51 lines
drivers/watchdog/pc87413_wdt.c +15
-14return NOTIFY_DONE ; }/* -- Module's structures ---------------------------------------*/ -static const struct file_operations pc87413_fops = { - .owner =THIS_MODULE , - .llseek = no_llseek, - .write = pc87413_write, - .unlocked_ioctl = pc87413_ioctl, - .open = pc87413_open, - .release = pc87413_release, -}; -static struct notifier_block pc87413_notifier = { +static struct notifier_block pc87413wdt_notifier = { .notifier_call = pc87413_notify_sys, }; -static struct miscdevice pc87413_miscdev = { - .minor =WATCHDOG_MINOR , - .name ="watchdog" , - .fops = &pc87413_fops, +static struct watchdog_ops pc87413wdt_ops = { + .owner =THIS_MODULE , + .start = pc87413wdt_start, + .stop = pc87413wdt_stop, + .ping = pc87413wdt_keepalive, + .set_timeout = pc87413wdt_set_heartbeat, +}; + +static struct watchdog_device pc87413wdt_wdd = { + .info = &pc87413wdt_ident, + .ops = &pc87413wdt_ops, + .status =WATCHDOG_NOWAYOUT_INIT_STATUS }; +/* -- Module init functions -------------------------------------*/ /** @@ -515,7 +510,7 @@ static int __init pc87413_init(void)if (ret !=0 )pr_err ("cannot register reboot notifier (err=%d)\n" , ret); - ret =misc_register (&pc87413_miscdev); + ret =watchdog_register_device (&pc87413wdt_wdd);if (ret !=0 ) {pr_err ("cannot register miscdev on minor=%d (err=%d)\n" ,WATCHDOG_MINOR , ret);
drivers/watchdog/pc87413_wdt.c static int __init pc87413_init(void) · line 531
Quoted 5 lines
drivers/watchdog/pc87413_wdt.c +1
-1@@ -533,13 +528,14 @@ static int __init pc87413_init(void) goto misc_unreg; } -pc87413_enable (); +pc87413_start ();
You should drop this; it doesn't make sense to start the watchdog here.
Quoted 12 lines
drivers/watchdog/pc87413_wdt.c +2
-1release_region (io,2 ); +pc87413_keepalive (&pc87413wdt_wdd);return 0 ; misc_unreg: -misc_deregister (&pc87413_miscdev); + watchdog_unregister_device(&pc87413wdt_wdd) reboot_unreg:unregister_reboot_notifier (&pc87413_notifier);release_region (io,2 );
Guenter Roeck
maintainerQuoted 50 lines · Mark Balantzyan
There is a potential for the variable
swc_base_addrin the call chain of the driver initialization function (init) to be used before initialization. This brought up the need for, by rewriting the driver to use the common watchdog interface, ensuring to have all resources in place. This patch addresses this need by rewriting into common watchdog interface utilization for the driver.Signed-off-by Mark Balantzyan <[email protected]>--- drivers/media/pci/tw686x/Kconfig | 1 + drivers/watchdog/pc87413_wdt.c | 92 +++++++++++++++----------------- 2 files changed, 45 insertions(+), 48 deletions(-)drivers/media/pci/tw686x/Kconfig +1
-0@@ -5,6 +5,7 @@ config VIDEO_TW686X select VIDEOBUF2_DMA_CONTIG select VIDEOBUF2_DMA_SG select SND_PCM + select WATCHDOG_CORE help Support for Intersil/Techwell TW686x-based frame grabber cards.drivers/watchdog/pc87413_wdt.c +0
-3@@ -22,12 +22,10 @@#include <linux/module.h> #include <linux/types.h> -#include <linux/miscdevice.h> #include <linux/watchdog.h> #include <linux/ioport.h> #include <linux/delay.h> #include <linux/notifier.h> -#include <linux/fs.h> #include <linux/reboot.h> #include <linux/init.h> #include <linux/spinlock.h> @@ -65,7 +63,6 @@ static char expect_close; /* is the close expected? */static DEFINE_SPINLOCK (io_lock);/* to guard us from io races */ -static bool nowayout =WATCHDOG_NOWAYOUT ;/* -- Low level function ----------------------------------------*/
drivers/watchdog/pc87413_wdt.c static inline void pc87413_disable_sw_wd_trg(void) · line 218
Quoted 8 lines
drivers/watchdog/pc87413_wdt.c +2
-2@@ -216,9 +213,9 @@ static inline void pc87413_disable_sw_wd_trg(void)/* -- Higher level functions ------------------------------------*/ -/* Enable the watchdog */ +/* Enable/start the watchdog */ -static void pc87413_enable (void ) +static void pc87413_start (void )
I really don't think that this code compiles without warning.
Guenter
Quoted 180 lines
drivers/watchdog/pc87413_wdt.c +42
-43{spin_lock (&io_lock);@@ -231,9 +228,9 @@ static void pc87413_enable(void)spin_unlock (&io_lock); } -/* Disable the watchdog */ +/* Disable/stop the watchdog */ -static void pc87413_disable (void ) +static void pc87413_stop (void ) {spin_lock (&io_lock);@@ -245,9 +242,9 @@ static void pc87413_disable(void)spin_unlock (&io_lock); } -/* Refresh the watchdog */ +/* Refresh/keepalive the watchdog */ -static void pc87413_refresh (void ) +static void pc87413_keepalive (struct watchdog_device *wdd) {spin_lock (&io_lock);@@ -260,6 +257,8 @@ static void pc87413_refresh(void)pc87413_enable_sw_wd_trg ();spin_unlock (&io_lock); + +return 0 ; }/* -- File operations -------------------------------------------*/ @@ -278,9 +277,6 @@ static int pc87413_open(struct inode *inode, struct file *file)if (test_and_set_bit (0 , &timer_enabled))return -EBUSY ; -if (nowayout) -__module_get (THIS_MODULE ); -/* Reload and activate timer */ pc87413_refresh ();@@ -331,7 +327,6 @@ static int pc87413_status(void)/** * pc87413_write: -* @file: file handle to the watchdog * @data: data buffer to write * @len: length in bytes * @ppos: pointer to the position to write. No seeks allowed @@ -345,26 +340,25 @@ static ssize_t pc87413_write(struct file *file, const char __user *data, {/* See if we got the magic character 'V' and reload the timer */ if (len) { -if (!nowayout) { -size_t i; - -/* reset expect flag */ - expect_close =0 ; - -/* scan to see whether or not we got the -magic character */ -for (i =0 ; i != len; i++) { -char c; -if (get_user (c, data + i)) -return -EFAULT ; -if (c =='V' ) - expect_close =42 ; - } +size_t i; + +/* reset expect flag */ + expect_close =0 ; + +/* scan to see whether or not we got the +magic character */ +for (i =0 ; i != len; i++) { +char c; +if (get_user (c, data + i)) +return -EFAULT ; +if (c =='V' ) + expect_close =42 ; } + }/* someone wrote to us, we should reload the timer */ -pc87413_refresh (); - } +pc87413_refresh (); +return len; }@@ -417,7 +411,7 @@ static long pc87413_ioctl(struct file *file, unsigned int cmd, retval =0 ; }if (options &WDIOS_ENABLECARD ) { -pc87413_enable (); +pc87413_start (); retval =0 ; }return retval;@@ -466,31 +460,32 @@ static int pc87413_notify_sys(struct notifier_block *this, {if (code ==SYS_DOWN || code ==SYS_HALT )/* Turn the card off */ -pc87413_disable (); +pc87413_stop ();return NOTIFY_DONE ; }/* -- Module's structures ---------------------------------------*/ -static const struct file_operations pc87413_fops = { - .owner =THIS_MODULE , - .llseek = no_llseek, - .write = pc87413_write, - .unlocked_ioctl = pc87413_ioctl, - .open = pc87413_open, - .release = pc87413_release, -}; -static struct notifier_block pc87413_notifier = { +static struct notifier_block pc87413wdt_notifier = { .notifier_call = pc87413_notify_sys, }; -static struct miscdevice pc87413_miscdev = { - .minor =WATCHDOG_MINOR , - .name ="watchdog" , - .fops = &pc87413_fops, +static struct watchdog_ops pc87413wdt_ops = { + .owner =THIS_MODULE , + .start = pc87413wdt_start, + .stop = pc87413wdt_stop, + .ping = pc87413wdt_keepalive, + .set_timeout = pc87413wdt_set_heartbeat, +}; + +static struct watchdog_device pc87413wdt_wdd = { + .info = &pc87413wdt_ident, + .ops = &pc87413wdt_ops, + .status =WATCHDOG_NOWAYOUT_INIT_STATUS }; +/* -- Module init functions -------------------------------------*/ /** @@ -515,7 +510,7 @@ static int __init pc87413_init(void)if (ret !=0 )pr_err ("cannot register reboot notifier (err=%d)\n" , ret); - ret =misc_register (&pc87413_miscdev); + ret =watchdog_register_device (&pc87413wdt_wdd);if (ret !=0 ) {pr_err ("cannot register miscdev on minor=%d (err=%d)\n" ,WATCHDOG_MINOR , ret);@@ -533,13 +528,14 @@ static int __init pc87413_init(void) goto misc_unreg; } -pc87413_enable (); +pc87413_start ();release_region (io,2 ); +pc87413_keepalive (&pc87413wdt_wdd);return 0 ; misc_unreg: -misc_deregister (&pc87413_miscdev); + watchdog_unregister_device(&pc87413wdt_wdd) reboot_unreg:unregister_reboot_notifier (&pc87413_notifier);release_region (io,2 );
Yes, each time I go through an edit I discover something I missed, apologies. Will be working on it for a bit, currently getting compile time errors. Just letting you know and it’s good we’re checking :-)
Thank you,
Mark