Skip to contentSkip to conversation

i.MX7ULP: Workaround APLL PFD2 to 345.6Mhz

PATCH RESEND New sbabic at denx.de 1 participant 1 message Aug 5, 2019

lore
Share & tools
lore
#0 lore raw

PATCH RESEND 11/14 i.MX7ULP: Workaround APLL PFD2 to 345.6Mhz

Quoted 8 lines

From: Ye Li <[email protected]>
The GPU uses APLL PFD2 as its clock parent (483.84Mhz) with divider set to 1. This frequecy is out of ULP A0 spec. The MAX rate for GPU is 350Mhz. So we simply configure the APLL PFD2 to 345.6Mhz (FRAC=28) to workaround the problem. The correct fix should let GPU handle the clock rate in kernel.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================