Skip to contentSkip to conversation

iommu: Bounce page for untrusted devices

PATCH Superseded Lu Baolu 2 participants 11 messages Aug 23, 2019 – Aug 30, 2019

Subsystems (7)
Documentation PCI Tracing IOMMU +3 more subsystems

v7 of 9 Superseded Latest is v9 →

lore
Share & tools
lore

Lu Baolu

author
#0 lore raw

v7 cover iommu: Bounce page for untrusted devices

The Thunderbolt vulnerabilities are public and have a nice name as Thunderclap [1] [3] nowadays. This patch series aims to mitigate those concerns.

An external PCI device is a PCI peripheral device connected to the system through an external bus, such as Thunderbolt. What makes it different is that it can't be trusted to the same degree as the devices build into the system. Generally, a trusted PCIe device will DMA into the designated buffers and not overrun or otherwise write outside the specified bounds. But it's different for an external device.

The minimum IOMMU mapping granularity is one page (4k), so for DMA transfers smaller than that a malicious PCIe device can access the whole page of memory even if it does not belong to the driver in question. This opens a possibility for DMA attack. For more information about DMA attacks imposed by an untrusted PCI/PCIe device, please refer to [2].

This implements bounce buffer for the untrusted external devices. The transfers should be limited in isolated pages so the IOMMU window does not cover memory outside of what the driver expects. Previously (v3 and before), we proposed an optimisation to only copy the head and tail of the buffer if it spans multiple pages, and directly map the ones in the middle. Figure 1 gives a big picture about this solution.

swiotlb System
IOVA bounce page Memory
.---------. .---------. .---------.
| | | | | |
| | | | | |

buffer_start .---------.      .---------.        .---------.
             |         |----->|         |*******>|         |
             |         |      |         | swiotlb|         |
             |         |      |         | mapping|         |
 IOMMU Page  '---------'      '---------'        '---------'
  Boundary   |         |                         |         |
             |         |                         |         |
             |         |                         |         |
             |         |------------------------>|         |
             |         |    IOMMU mapping        |         |
             |         |                         |         |
 IOMMU Page  .---------.                         .---------.
  Boundary   |         |                         |         |
             |         |                         |         |
             |         |------------------------>|         |
             |         |     IOMMU mapping       |         |
             |         |                         |         |
             |         |                         |         |
 IOMMU Page  .---------.      .---------.        .---------.
  Boundary   |         |      |         |        |         |
             |         |      |         |        |         |
             |         |----->|         |*******>|         |
  buffer_end '---------'      '---------' swiotlb'---------'
             |         |      |         | mapping|         |
             |         |      |         |        |         |
             '---------'      '---------'        '---------'

Figure 1: A big view of iommu bounce page

As Robin Murphy pointed out, this ties us to using strict mode for TLB maintenance, which may not be an overall win depending on the balance between invalidation bandwidth vs. memcpy bandwidth. If we use standard SWIOTLB logic to always copy the whole thing, we should be able to release the bounce pages via the flush queue to allow 'safe' lazy unmaps. So since v4 we start to use the standard swiotlb logic.

swiotlb System
IOVA bounce page Memory

buffer_start .---------.      .---------.        .---------.
             |         |      |         |        |         |
             |         |      |         |        |         |
             |         |      |         |        .---------.physical
             |         |----->|         | ------>|         |_start  
             |         |iommu |         | swiotlb|         |
             |         | map  |         |   map  |         |
 IOMMU Page  .---------.      .---------.        '---------'
  Boundary   |         |      |         |        |         |
             |         |      |         |        |         |
             |         |----->|         |        |         |
             |         |iommu |         |        |         |
             |         | map  |         |        |         |
             |         |      |         |        |         |
 IOMMU Page  .---------.      .---------.        .---------.
  Boundary   |         |      |         |        |         |
             |         |----->|         |        |         |
             |         |iommu |         |        |         |
             |         | map  |         |        |         |
             |         |      |         |        |         |
 IOMMU Page  |         |      |         |        |         |
  Boundary   .---------.      .---------.        .---------.
             |         |      |         |------->|         |
  buffer_end '---------'      '---------' swiotlb|         |
             |         |----->|         |   map  |         |
             |         |iommu |         |        |         |
             |         | map  |         |        '---------' physical
             |         |      |         |        |         | _end    
             '---------'      '---------'        '---------'

Figure 2: A big view of simplified iommu bounce page

The implementation of bounce buffers for untrusted devices will cause a little performance overhead, but we didn't see any user experience problems. The users could use the kernel parameter defined in the IOMMU driver to remove the performance overhead if they trust their devices enough.

This series introduces below APIs for bounce page:

* iommu_bounce_map(dev, addr, paddr, size, dir, attrs)
- Map a buffer start at DMA address @addr in bounce page manner. For buffer that doesn't cross whole minimal IOMMU pages, the bounce buffer policy is applied. A bounce page mapped by swiotlb will be used as the DMA target in the IOMMU page table.

* iommu_bounce_unmap(dev, addr, size, dir, attrs)
- Unmap the buffer mapped with iommu_bounce_map(). The bounce page will be torn down after the bounced data get synced.

* iommu_bounce_sync_single(dev, addr, size, dir, target)
- Synce the bounced data in case the bounce mapped buffer is reused.

The bounce page idea:

The patch series has been tested by:

Reference:
[1] https://thunderclap.io/
[2] https://thunderclap.io/thunderclap-paper-ndss2019.pdf
[3] https://christian.kellner.me/2019/02/27/thunderclap-and-linux/
[4] https://lkml.org/lkml/2019/3/4/644

Best regards,
Baolu

Change log:
v6->v7:
- The previous v6 was posted here:

    https://lkml.org/lkml/2019/7/30/18

- Remove the unnecessary bounce page iommu APIs

v5->v6:
- The previous v5 was posted here:

    https://lkml.org/lkml/2019/7/24/2134

- Move the per-device dma ops into another seperated series.
- Christoph Hellwig reviewed the patches and add his Reviewed-bys.
- Add Steven Rostedt's Review-by for the trace patch.
- Adress the review comments from Christoph Hellwig.
- This patch series is now based on v5.3-rc2.

v4->v5:
- The previous v4 was posted here:

    https://lkml.org/lkml/2019/6/2/187
  - Add per-device dma ops and use bounce buffer specific dma
    ops for those untrusted devices.
      devices with identity domains	-> system default dma ops
      trusted devices with dma domains	-> iommu/vt-d dma ops
      untrusted devices		 	-> bounced dma ops

- Address various review comments received since v4.
- This patch series is based on v5.3-rc1.

v3->v4:
- The previous v3 was posted here:

    https://lkml.org/lkml/2019/4/20/213

- Discard the optimization of only mapping head and tail partial pages, use the standard swiotlb in order to achieve iotlb flush efficiency.
- This patch series is based on the top of the vt-d branch of Joerg's iommu tree.

v2->v3:
- The previous v2 was posed here:

    https://lkml.org/lkml/2019/3/27/157

- Reuse the existing swiotlb APIs for bounce buffer by extending it to support bounce page.
- Move the bouce page APIs into iommu generic layer.
- This patch series is based on 5.1-rc1.

v1->v2:
- The previous v1 was posted here:

    https://lkml.org/lkml/2019/3/12/66

- Refactor the code to remove struct bounce_param;
- During the v1 review cycle, we discussed the possibility of reusing swiotlb code to avoid code dumplication, but we found the swiotlb implementations are not ready for the use of bounce page pool.
https://lkml.org/lkml/2019/3/19/259
- This patch series has been rebased to v5.1-rc2.

Lu Baolu (7):
iommu/vt-d: Don't switch off swiotlb if use direct dma
PCI: Add dev_is_untrusted helper
swiotlb: Split size parameter to map/unmap APIs
swiotlb: Zero out bounce buffer for untrusted device iommu/vt-d: Check whether device requires bounce buffer iommu/vt-d: Add trace events for device dma map/unmap iommu/vt-d: Use bounce buffer for untrusted devices

 .../admin-guide/kernel-parameters.txt         |   5 +
 drivers/iommu/Kconfig                         |   1 +
 drivers/iommu/Makefile                        |   1 +
 drivers/iommu/intel-iommu.c                   | 268 +++++++++++++++++-
 drivers/iommu/intel-trace.c                   |  14 +
 drivers/xen/swiotlb-xen.c                     |   8 +-
 include/linux/pci.h                           |   2 +
 include/linux/swiotlb.h                       |   8 +-
 include/trace/events/intel_iommu.h            |  84 ++++++
 kernel/dma/direct.c                           |   2 +-
 kernel/dma/swiotlb.c                          |  46 ++-
 11 files changed, 414 insertions(+), 25 deletions(-)
 create mode 100644 drivers/iommu/intel-trace.c
 create mode 100644 include/trace/events/intel_iommu.h
Signature · 1 line
2.17.1
author
#1 lore raw

PATCH v7 1/7 iommu/vt-d: Don't switch off swiotlb if use direct dma

The direct dma implementation depends on swiotlb. Hence, don't switch off swiotlb since direct dma interfaces are used in this driver.

---
 drivers/iommu/Kconfig       | 1 +
 drivers/iommu/intel-iommu.c | 6 ------
 2 files changed, 1 insertion(+), 6 deletions(-)
drivers/iommu/Kconfig +1 -0
index e15cdcd8cb3c..a4ddeade8ac4 100644
@@ -182,6 +182,7 @@ config INTEL_IOMMU
 	select IOMMU_IOVA
 	select NEED_DMA_MAP_STATE
 	select DMAR_TABLE
+	select SWIOTLB
 	help
 	  DMA remapping (DMAR) devices support enables independent address
 	  translations for Direct Memory Access (DMA) from devices.
drivers/iommu/intel-iommu.c +0 -6
index 12d094d08c0a..8316e57f047c 100644
@@ -4569,9 +4569,6 @@ static int __init platform_optin_force_iommu(void)
 		iommu_identity_mapping |= IDENTMAP_ALL;
 
 	dmar_disabled = 0;
-#if defined(CONFIG_X86) && defined(CONFIG_SWIOTLB)
-	swiotlb = 0;
-#endif
 	no_iommu = 0;
 
 	return 1;
@@ -4710,9 +4707,6 @@ int __init intel_iommu_init(void)
 	}
 	up_write(&dmar_global_lock);
 
-#if defined(CONFIG_X86) && defined(CONFIG_SWIOTLB)
-	swiotlb = 0;
-#endif
 	dma_ops = &intel_dma_ops;
 
 	init_iommu_pm_ops();
Signature · 1 line
2.17.1
author
#5 lore raw

PATCH v7 2/7 PCI: Add dev_is_untrusted helper

In reply to Lu Baolu

There are several places in the kernel where it is necessary to check whether a device is a pci untrusted device. Add a helper to simplify the callers.

---
 include/linux/pci.h | 2 ++
 1 file changed, 2 insertions(+)
include/linux/pci.h +2 -0
index 82e4cd1b7ac3..6c107eb381ac 100644
@@ -1029,6 +1029,7 @@ void pcibios_setup_bridge(struct pci_bus *bus, unsigned long type);
 void pci_sort_breadthfirst(void);
 #define dev_is_pci(d) ((d)->bus == &pci_bus_type)
 #define dev_is_pf(d) ((dev_is_pci(d) ? to_pci_dev(d)->is_physfn : false))
+#define dev_is_untrusted(d) ((dev_is_pci(d) ? to_pci_dev(d)->untrusted : false))
 
 /* Generic PCI functions exported to card drivers */
 
@@ -1768,6 +1769,7 @@ static inline struct pci_dev *pci_dev_get(struct pci_dev *dev) { return NULL; }
 
 #define dev_is_pci(d) (false)
 #define dev_is_pf(d) (false)
+#define dev_is_untrusted(d) (false)
 static inline bool pci_acs_enabled(struct pci_dev *pdev, u16 acs_flags)
 { return false; }
 static inline int pci_irqd_intx_xlate(struct irq_domain *d,
Signature · 1 line
2.17.1
author
#7 lore raw

PATCH v7 4/7 swiotlb: Zero out bounce buffer for untrusted device

In reply to Lu Baolu

This is necessary to avoid exposing valid kernel data to any malicious device.

---
 kernel/dma/swiotlb.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)
kernel/dma/swiotlb.c +15 -1
index 89066efa3840..04bea5a87462 100644
@@ -35,6 +35,7 @@
 #include <linux/scatterlist.h>
 #include <linux/mem_encrypt.h>
 #include <linux/set_memory.h>
+#include <linux/pci.h>
 #ifdef CONFIG_DEBUG_FS
 #include <linux/debugfs.h>
 #endif
@@ -458,6 +459,8 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,
 	unsigned long offset_slots;
 	unsigned long max_slots;
 	unsigned long tmp_io_tlb_used;
+	void *zero_addr;
+	size_t zero_size;
 
 	if (no_iotlb_memory)
 		panic("Can not allocate SWIOTLB buffer earlier and can't now provide you with the DMA bounce buffer");
@@ -565,9 +568,20 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,
 	 */
 	for (i = 0; i < nslots; i++)
 		io_tlb_orig_addr[index+i] = orig_addr + (i << IO_TLB_SHIFT);
+
+	zero_addr = phys_to_virt(tlb_addr);
+	zero_size = alloc_size;
+
 	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) &&
-	    (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL))
+	    (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL)) {
 		swiotlb_bounce(orig_addr, tlb_addr, mapping_size, DMA_TO_DEVICE);
+		zero_addr += mapping_size;
+		zero_size -= mapping_size;
+	}
+
+	/* Zero out the bounce buffer if the consumer is untrusted. */
+	if (dev_is_untrusted(hwdev) && zero_size)
+		memset(zero_addr, 0, zero_size);
 
 	return tlb_addr;
 }
Signature · 1 line
2.17.1
author
#6 lore raw

PATCH v7 3/7 swiotlb: Split size parameter to map/unmap APIs

In reply to Lu Baolu

This splits the size parameter to swiotlb_tbl_map_single() and swiotlb_tbl_unmap_single() into an alloc_size and a mapping_size parameter, where the latter one is rounded up to the iommu page size.

---
 drivers/xen/swiotlb-xen.c |  8 ++++----
 include/linux/swiotlb.h   |  8 ++++++--
 kernel/dma/direct.c       |  2 +-
 kernel/dma/swiotlb.c      | 30 +++++++++++++++++++-----------
 4 files changed, 30 insertions(+), 18 deletions(-)
drivers/xen/swiotlb-xen.c +4 -4
index ae1df496bf38..adcabd9473eb 100644
@@ -386,8 +386,8 @@ static dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,
 	 */
 	trace_swiotlb_bounced(dev, dev_addr, size, swiotlb_force);
 
-	map = swiotlb_tbl_map_single(dev, start_dma_addr, phys, size, dir,
-				     attrs);
+	map = swiotlb_tbl_map_single(dev, start_dma_addr, phys,
+				     size, size, dir, attrs);
 	if (map == (phys_addr_t)DMA_MAPPING_ERROR)
 		return DMA_MAPPING_ERROR;
 
@@ -397,7 +397,7 @@ static dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,
 	 * Ensure that the address returned is DMA'ble
 	 */
 	if (unlikely(!dma_capable(dev, dev_addr, size))) {
-		swiotlb_tbl_unmap_single(dev, map, size, dir,
+		swiotlb_tbl_unmap_single(dev, map, size, size, dir,
 				attrs | DMA_ATTR_SKIP_CPU_SYNC);
 		return DMA_MAPPING_ERROR;
 	}
@@ -433,7 +433,7 @@ static void xen_unmap_single(struct device *hwdev, dma_addr_t dev_addr,
 
 	/* NOTE: We use dev_addr here, not paddr! */
 	if (is_xen_swiotlb_buffer(dev_addr))
-		swiotlb_tbl_unmap_single(hwdev, paddr, size, dir, attrs);
+		swiotlb_tbl_unmap_single(hwdev, paddr, size, size, dir, attrs);
 }
 
 static void xen_swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
include/linux/swiotlb.h +6 -2
index 361f62bb4a8e..cde3dc18e21a 100644
@@ -46,13 +46,17 @@ enum dma_sync_target {
 
 extern phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,
 					  dma_addr_t tbl_dma_addr,
-					  phys_addr_t phys, size_t size,
+					  phys_addr_t phys,
+					  size_t mapping_size,
+					  size_t alloc_size,
 					  enum dma_data_direction dir,
 					  unsigned long attrs);
 
 extern void swiotlb_tbl_unmap_single(struct device *hwdev,
 				     phys_addr_t tlb_addr,
-				     size_t size, enum dma_data_direction dir,
+				     size_t mapping_size,
+				     size_t alloc_size,
+				     enum dma_data_direction dir,
 				     unsigned long attrs);
 
 extern void swiotlb_tbl_sync_single(struct device *hwdev,
kernel/dma/direct.c +1 -1
index 795c9b095d75..a7f2a0163426 100644
@@ -297,7 +297,7 @@ void dma_direct_unmap_page(struct device *dev, dma_addr_t addr,
 		dma_direct_sync_single_for_cpu(dev, addr, size, dir);
 
 	if (unlikely(is_swiotlb_buffer(phys)))
-		swiotlb_tbl_unmap_single(dev, phys, size, dir, attrs);
+		swiotlb_tbl_unmap_single(dev, phys, size, size, dir, attrs);
 }
 EXPORT_SYMBOL(dma_direct_unmap_page);
 
kernel/dma/swiotlb.c +19 -11
index 9de232229063..89066efa3840 100644
@@ -444,7 +444,9 @@ static void swiotlb_bounce(phys_addr_t orig_addr, phys_addr_t tlb_addr,
 
 phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,
 				   dma_addr_t tbl_dma_addr,
-				   phys_addr_t orig_addr, size_t size,
+				   phys_addr_t orig_addr,
+				   size_t mapping_size,
+				   size_t alloc_size,
 				   enum dma_data_direction dir,
 				   unsigned long attrs)
 {
@@ -464,6 +466,9 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,
 		pr_warn_once("%s is active and system is using DMA bounce buffers\n",
 			     sme_active() ? "SME" : "SEV");
 
+	if (WARN_ON(mapping_size > alloc_size))
+		return (phys_addr_t)DMA_MAPPING_ERROR;
+
 	mask = dma_get_seg_boundary(hwdev);
 
 	tbl_dma_addr &= mask;
@@ -481,8 +486,8 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,
 	 * For mappings greater than or equal to a page, we limit the stride
 	 * (and hence alignment) to a page size.
 	 */
-	nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
-	if (size >= PAGE_SIZE)
+	nslots = ALIGN(alloc_size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
+	if (alloc_size >= PAGE_SIZE)
 		stride = (1 << (PAGE_SHIFT - IO_TLB_SHIFT));
 	else
 		stride = 1;
@@ -547,7 +552,7 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,
 	spin_unlock_irqrestore(&io_tlb_lock, flags);
 	if (!(attrs & DMA_ATTR_NO_WARN) && printk_ratelimit())
 		dev_warn(hwdev, "swiotlb buffer is full (sz: %zd bytes), total %lu (slots), used %lu (slots)\n",
-			 size, io_tlb_nslabs, tmp_io_tlb_used);
+			 alloc_size, io_tlb_nslabs, tmp_io_tlb_used);
 	return (phys_addr_t)DMA_MAPPING_ERROR;
 found:
 	io_tlb_used += nslots;
@@ -562,7 +567,7 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,
 		io_tlb_orig_addr[index+i] = orig_addr + (i << IO_TLB_SHIFT);
 	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) &&
 	    (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL))
-		swiotlb_bounce(orig_addr, tlb_addr, size, DMA_TO_DEVICE);
+		swiotlb_bounce(orig_addr, tlb_addr, mapping_size, DMA_TO_DEVICE);
 
 	return tlb_addr;
 }
@@ -571,21 +576,24 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,
  * tlb_addr is the physical address of the bounce buffer to unmap.
  */
 void swiotlb_tbl_unmap_single(struct device *hwdev, phys_addr_t tlb_addr,
-			      size_t size, enum dma_data_direction dir,
-			      unsigned long attrs)
+			      size_t mapping_size, size_t alloc_size,
+			      enum dma_data_direction dir, unsigned long attrs)
 {
 	unsigned long flags;
-	int i, count, nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
+	int i, count, nslots = ALIGN(alloc_size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
 	int index = (tlb_addr - io_tlb_start) >> IO_TLB_SHIFT;
 	phys_addr_t orig_addr = io_tlb_orig_addr[index];
 
+	if (WARN_ON(mapping_size > alloc_size))
+		return;
+
 	/*
 	 * First, sync the memory before unmapping the entry
 	 */
 	if (orig_addr != INVALID_PHYS_ADDR &&
 	    !(attrs & DMA_ATTR_SKIP_CPU_SYNC) &&
 	    ((dir == DMA_FROM_DEVICE) || (dir == DMA_BIDIRECTIONAL)))
-		swiotlb_bounce(orig_addr, tlb_addr, size, DMA_FROM_DEVICE);
+		swiotlb_bounce(orig_addr, tlb_addr, mapping_size, DMA_FROM_DEVICE);
 
 	/*
 	 * Return the buffer to the free list by setting the corresponding
@@ -665,14 +673,14 @@ bool swiotlb_map(struct device *dev, phys_addr_t *phys, dma_addr_t *dma_addr,
 
 	/* Oh well, have to allocate and map a bounce buffer. */
 	*phys = swiotlb_tbl_map_single(dev, __phys_to_dma(dev, io_tlb_start),
-			*phys, size, dir, attrs);
+			*phys, size, size, dir, attrs);
 	if (*phys == (phys_addr_t)DMA_MAPPING_ERROR)
 		return false;
 
 	/* Ensure that the address returned is DMA'ble */
 	*dma_addr = __phys_to_dma(dev, *phys);
 	if (unlikely(!dma_capable(dev, *dma_addr, size))) {
-		swiotlb_tbl_unmap_single(dev, *phys, size, dir,
+		swiotlb_tbl_unmap_single(dev, *phys, size, size, dir,
 			attrs | DMA_ATTR_SKIP_CPU_SYNC);
 		return false;
 	}
Signature · 6 lines
2.17.1

_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
author
#8 lore raw

PATCH v7 5/7 iommu/vt-d: Check whether device requires bounce buffer

In reply to Lu Baolu

This adds a helper to check whether a device needs to use bounce buffer. It also provides a boot time option to disable the bounce buffer. Users can use this to prevent the iommu driver from using the bounce buffer for performance gain.

---
 Documentation/admin-guide/kernel-parameters.txt | 5 +++++
 drivers/iommu/intel-iommu.c                     | 6 ++++++
 2 files changed, 11 insertions(+)
Documentation/admin-guide/kernel-parameters.txt +5 -0
index 47d981a86e2f..aaca73080097 100644
@@ -1732,6 +1732,11 @@
 			Note that using this option lowers the security
 			provided by tboot because it makes the system
 			vulnerable to DMA attacks.
+		nobounce [Default off]
+			Disable bounce buffer for unstrusted devices such as
+			the Thunderbolt devices. This will treat the untrusted
+			devices as the trusted ones, hence might expose security
+			risks of DMA attacks.
 
 	intel_idle.max_cstate=	[KNL,HW,ACPI,X86]
 			0	disables intel_idle and fall back on acpi_idle.
drivers/iommu/intel-iommu.c +6 -0
index 8316e57f047c..b1ab3526e6fa 100644
@@ -360,6 +360,7 @@ static int dmar_forcedac;
 static int intel_iommu_strict;
 static int intel_iommu_superpage = 1;
 static int iommu_identity_mapping;
+static int intel_no_bounce;
 
 #define IDENTMAP_ALL		1
 #define IDENTMAP_GFX		2
@@ -373,6 +374,8 @@ EXPORT_SYMBOL_GPL(intel_iommu_gfx_mapped);
 static DEFINE_SPINLOCK(device_domain_lock);
 static LIST_HEAD(device_domain_list);
 
+#define device_needs_bounce(d) (!intel_no_bounce && dev_is_untrusted(d))
+
 /*
  * Iterate over elements in device_domain_list and call the specified
  * callback @fn against each element.
@@ -455,6 +458,9 @@ static int __init intel_iommu_setup(char *str)
 			printk(KERN_INFO
 				"Intel-IOMMU: not forcing on after tboot. This could expose security risk for tboot\n");
 			intel_iommu_tboot_noforce = 1;
+		} else if (!strncmp(str, "nobounce", 8)) {
+			pr_info("Intel-IOMMU: No bounce buffer. This could expose security risks of DMA attacks\n");
+			intel_no_bounce = 1;
 		}
 
 		str += strcspn(str, ",");
Signature · 1 line
2.17.1
author
#9 lore raw

PATCH v7 6/7 iommu/vt-d: Add trace events for device dma map/unmap

In reply to Lu Baolu

This adds trace support for the Intel IOMMU driver. It also declares some events which could be used to trace the events when an IOVA is being mapped or unmapped in a domain.

---
 drivers/iommu/Makefile             |  1 +
 drivers/iommu/intel-trace.c        | 14 +++++
 include/trace/events/intel_iommu.h | 84 ++++++++++++++++++++++++++++++
 3 files changed, 99 insertions(+)
 create mode 100644 drivers/iommu/intel-trace.c
 create mode 100644 include/trace/events/intel_iommu.h
drivers/iommu/Makefile +1 -0
index f13f36ae1af6..bfe27b2755bd 100644
@@ -17,6 +17,7 @@ obj-$(CONFIG_ARM_SMMU) += arm-smmu.o
 obj-$(CONFIG_ARM_SMMU_V3) += arm-smmu-v3.o
 obj-$(CONFIG_DMAR_TABLE) += dmar.o
 obj-$(CONFIG_INTEL_IOMMU) += intel-iommu.o intel-pasid.o
+obj-$(CONFIG_INTEL_IOMMU) += intel-trace.o
 obj-$(CONFIG_INTEL_IOMMU_DEBUGFS) += intel-iommu-debugfs.o
 obj-$(CONFIG_INTEL_IOMMU_SVM) += intel-svm.o
 obj-$(CONFIG_IPMMU_VMSA) += ipmmu-vmsa.o
drivers/iommu/intel-trace.c new file +14 -0
new file mode 100644
index 000000000000..bfb6a6e37a88
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel IOMMU trace support
+ *
+ * Copyright (C) 2019 Intel Corporation
+ *
+ * Author: Lu Baolu <[email protected]>
+ */
+
+#include <linux/string.h>
+#include <linux/types.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/intel_iommu.h>
include/trace/events/intel_iommu.h new file +84 -0

84 lines not on this page · raw message

Signature · 1 line
2.17.1
author
#10 lore raw

PATCH v7 7/7 iommu/vt-d: Use bounce buffer for untrusted devices

In reply to Lu Baolu

The Intel VT-d hardware uses paging for DMA remapping. The minimum mapped window is a page size. The device drivers may map buffers not filling the whole IOMMU window. This allows the device to access to possibly unrelated memory and a malicious device could exploit this to perform DMA attacks. To address this, the Intel IOMMU driver will use bounce pages for those buffers which don't fill whole IOMMU pages.

---
 drivers/iommu/intel-iommu.c | 256 ++++++++++++++++++++++++++++++++++++
 1 file changed, 256 insertions(+)
drivers/iommu/intel-iommu.c +256 -0
index b1ab3526e6fa..1f15c6f5880f 100644
@@ -41,9 +41,11 @@
 #include <linux/dma-direct.h>
 #include <linux/crash_dump.h>
 #include <linux/numa.h>
+#include <linux/swiotlb.h>
 #include <asm/irq_remapping.h>
 #include <asm/cacheflush.h>
 #include <asm/iommu.h>
+#include <trace/events/intel_iommu.h>
 
 #include "irq_remapping.h"
 #include "intel-pasid.h"
@@ -3746,6 +3748,252 @@ static const struct dma_map_ops intel_dma_ops = {
 	.dma_supported = dma_direct_supported,
 };
 
+static inline phys_addr_t
+iova_to_tlb_addr(struct dmar_domain *domain, dma_addr_t addr)
+{
+	struct dma_pte *pte;
+	int level = 0;
+	u64 phys = 0;
+
+	pte = pfn_to_dma_pte(domain, addr >> VTD_PAGE_SHIFT, &level);
+	if (pte)
+		phys = dma_pte_addr(pte);
+
+	return phys;
+}
+
+static void
+bounce_sync_single(struct device *dev, dma_addr_t addr, size_t size,
+		   enum dma_data_direction dir, enum dma_sync_target target)
+{
+	struct dmar_domain *domain;
+	phys_addr_t tlb_addr;
+
+	domain = find_domain(dev);
+	if (WARN_ON(!domain))
+		return;
+
+	tlb_addr = iova_to_tlb_addr(domain, addr);
+	if (is_swiotlb_buffer(tlb_addr))
+		swiotlb_tbl_sync_single(dev, tlb_addr, size, dir, target);
+}
+
+static dma_addr_t
+bounce_map_single(struct device *dev, phys_addr_t paddr, size_t size,
+		  enum dma_data_direction dir, unsigned long attrs,
+		  u64 dma_mask)
+{
+	size_t aligned_size = ALIGN(size, VTD_PAGE_SIZE);
+	struct dmar_domain *domain;
+	struct intel_iommu *iommu;
+	unsigned long iova_pfn;
+	unsigned long nrpages;
+	phys_addr_t tlb_addr;
+	int prot = 0;
+	int ret;
+
+	domain = find_domain(dev);
+	if (WARN_ON(dir == DMA_NONE || !domain))
+		return DMA_MAPPING_ERROR;
+
+	iommu = domain_get_iommu(domain);
+	if (WARN_ON(!iommu))
+		return DMA_MAPPING_ERROR;
+
+	nrpages = aligned_nrpages(0, size);
+	iova_pfn = intel_alloc_iova(dev, domain,
+				    dma_to_mm_pfn(nrpages), dma_mask);
+	if (!iova_pfn)
+		return DMA_MAPPING_ERROR;
+
+	/*
+	 * Check if DMAR supports zero-length reads on write only
+	 * mappings..
+	 */
+	if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL ||
+			!cap_zlr(iommu->cap))
+		prot |= DMA_PTE_READ;
+	if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL)
+		prot |= DMA_PTE_WRITE;
+
+	/*
+	 * If both the physical buffer start address and size are
+	 * page aligned, we don't need to use a bounce page.
+	 */
+	if (!IS_ALIGNED(paddr | size, VTD_PAGE_SIZE)) {
+		tlb_addr = swiotlb_tbl_map_single(dev,
+				__phys_to_dma(dev, io_tlb_start),
+				paddr, size, aligned_size, dir, attrs);
+		if (tlb_addr == DMA_MAPPING_ERROR)
+			goto swiotlb_error;
+	} else {
+		tlb_addr = paddr;
+	}
+
+	ret = domain_pfn_mapping(domain, mm_to_dma_pfn(iova_pfn),
+				 tlb_addr >> VTD_PAGE_SHIFT, nrpages, prot);
+	if (ret)
+		goto mapping_error;
+
+	trace_bounce_map_single(dev, iova_pfn << PAGE_SHIFT, paddr, size);
+
+	return (phys_addr_t)iova_pfn << PAGE_SHIFT;
+
+mapping_error:
+	if (is_swiotlb_buffer(tlb_addr))
+		swiotlb_tbl_unmap_single(dev, tlb_addr, size,
+					 aligned_size, dir, attrs);
+swiotlb_error:
+	free_iova_fast(&domain->iovad, iova_pfn, dma_to_mm_pfn(nrpages));
+	dev_err(dev, "Device bounce map: %zx@%llx dir %d --- failed\n",
+		size, (unsigned long long)paddr, dir);
+
+	return DMA_MAPPING_ERROR;
+}
+
+static void
+bounce_unmap_single(struct device *dev, dma_addr_t dev_addr, size_t size,
+		    enum dma_data_direction dir, unsigned long attrs)
+{
+	size_t aligned_size = ALIGN(size, VTD_PAGE_SIZE);
+	struct dmar_domain *domain;
+	phys_addr_t tlb_addr;
+
+	domain = find_domain(dev);
+	if (WARN_ON(!domain))
+		return;
+
+	tlb_addr = iova_to_tlb_addr(domain, dev_addr);
+	if (WARN_ON(!tlb_addr))
+		return;
+
+	intel_unmap(dev, dev_addr, size);
+	if (is_swiotlb_buffer(tlb_addr))
+		swiotlb_tbl_unmap_single(dev, tlb_addr, size,
+					 aligned_size, dir, attrs);
+
+	trace_bounce_unmap_single(dev, dev_addr, size);
+}
+
+static dma_addr_t
+bounce_map_page(struct device *dev, struct page *page, unsigned long offset,
+		size_t size, enum dma_data_direction dir, unsigned long attrs)
+{
+	return bounce_map_single(dev, page_to_phys(page) + offset,
+				 size, dir, attrs, *dev->dma_mask);
+}
+
+static dma_addr_t
+bounce_map_resource(struct device *dev, phys_addr_t phys_addr, size_t size,
+		    enum dma_data_direction dir, unsigned long attrs)
+{
+	return bounce_map_single(dev, phys_addr, size,
+				 dir, attrs, *dev->dma_mask);
+}
+
+static void
+bounce_unmap_page(struct device *dev, dma_addr_t dev_addr, size_t size,
+		  enum dma_data_direction dir, unsigned long attrs)
+{
+	bounce_unmap_single(dev, dev_addr, size, dir, attrs);
+}
+
+static void
+bounce_unmap_resource(struct device *dev, dma_addr_t dev_addr, size_t size,
+		      enum dma_data_direction dir, unsigned long attrs)
+{
+	bounce_unmap_single(dev, dev_addr, size, dir, attrs);
+}
+
+static void
+bounce_unmap_sg(struct device *dev, struct scatterlist *sglist, int nelems,
+		enum dma_data_direction dir, unsigned long attrs)
+{
+	struct scatterlist *sg;
+	int i;
+
+	for_each_sg(sglist, sg, nelems, i)
+		bounce_unmap_page(dev, sg->dma_address,
+				  sg_dma_len(sg), dir, attrs);
+}
+
+static int
+bounce_map_sg(struct device *dev, struct scatterlist *sglist, int nelems,
+	      enum dma_data_direction dir, unsigned long attrs)
+{
+	int i;
+	struct scatterlist *sg;
+
+	for_each_sg(sglist, sg, nelems, i) {
+		sg->dma_address = bounce_map_page(dev, sg_page(sg),
+						  sg->offset, sg->length,
+						  dir, attrs);
+		if (sg->dma_address == DMA_MAPPING_ERROR)
+			goto out_unmap;
+		sg_dma_len(sg) = sg->length;
+	}
+
+	return nelems;
+
+out_unmap:
+	bounce_unmap_sg(dev, sglist, i, dir, attrs | DMA_ATTR_SKIP_CPU_SYNC);
+	return 0;
+}
+
+static void
+bounce_sync_single_for_cpu(struct device *dev, dma_addr_t addr,
+			   size_t size, enum dma_data_direction dir)
+{
+	bounce_sync_single(dev, addr, size, dir, SYNC_FOR_CPU);
+}
+
+static void
+bounce_sync_single_for_device(struct device *dev, dma_addr_t addr,
+			      size_t size, enum dma_data_direction dir)
+{
+	bounce_sync_single(dev, addr, size, dir, SYNC_FOR_DEVICE);
+}
+
+static void
+bounce_sync_sg_for_cpu(struct device *dev, struct scatterlist *sglist,
+		       int nelems, enum dma_data_direction dir)
+{
+	struct scatterlist *sg;
+	int i;
+
+	for_each_sg(sglist, sg, nelems, i)
+		bounce_sync_single(dev, sg_dma_address(sg),
+				   sg_dma_len(sg), dir, SYNC_FOR_CPU);
+}
+
+static void
+bounce_sync_sg_for_device(struct device *dev, struct scatterlist *sglist,
+			  int nelems, enum dma_data_direction dir)
+{
+	struct scatterlist *sg;
+	int i;
+
+	for_each_sg(sglist, sg, nelems, i)
+		bounce_sync_single(dev, sg_dma_address(sg),
+				   sg_dma_len(sg), dir, SYNC_FOR_DEVICE);
+}
+
+static const struct dma_map_ops bounce_dma_ops = {
+	.alloc			= intel_alloc_coherent,
+	.free			= intel_free_coherent,
+	.map_sg			= bounce_map_sg,
+	.unmap_sg		= bounce_unmap_sg,
+	.map_page		= bounce_map_page,
+	.unmap_page		= bounce_unmap_page,
+	.sync_single_for_cpu	= bounce_sync_single_for_cpu,
+	.sync_single_for_device	= bounce_sync_single_for_device,
+	.sync_sg_for_cpu	= bounce_sync_sg_for_cpu,
+	.sync_sg_for_device	= bounce_sync_sg_for_device,
+	.map_resource		= bounce_map_resource,
+	.unmap_resource		= bounce_unmap_resource,
+	.dma_supported		= dma_direct_supported,
+};
+
 static inline int iommu_domain_cache_init(void)
 {
 	int ret = 0;
@@ -5309,6 +5557,11 @@ static int intel_iommu_add_device(struct device *dev)
 		}
 	}
 
+	if (device_needs_bounce(dev)) {
+		dev_info(dev, "Use Intel IOMMU bounce page dma_ops\n");
+		set_dma_ops(dev, &bounce_dma_ops);
+	}
+
 	return 0;
 }
 
@@ -5326,6 +5579,9 @@ static void intel_iommu_remove_device(struct device *dev)
 	iommu_group_remove_device(dev);
 
 	iommu_device_unlink(&iommu->iommu, dev);
+
+	if (device_needs_bounce(dev))
+		set_dma_ops(dev, NULL);
 }
 
 static void intel_iommu_get_resv_regions(struct device *device,
Signature · 1 line
2.17.1
maintainer
#2 lore raw

Re: [PATCH v7 1/7] iommu/vt-d: Don't switch off swiotlb if use direct dma

In reply to Lu Baolu
Quoted 13 lines · Lu Baolu
drivers/iommu/intel-iommu.c +0 -3
@@ -4569,9 +4569,6 @@ static int __init platform_optin_force_iommu(void)
 		iommu_identity_mapping |= IDENTMAP_ALL;
 
 	dmar_disabled = 0;
-#if defined(CONFIG_X86) && defined(CONFIG_SWIOTLB)
-	swiotlb = 0;
-#endif
 	no_iommu = 0;
 
 	return 1;

drivers/iommu/intel-iommu.c int __init intel_iommu_init(void) · line 4715

Quoted 6 lines
drivers/iommu/intel-iommu.c +0 -3
@@ -4710,9 +4707,6 @@ int __init intel_iommu_init(void)
 	}
 	up_write(&dmar_global_lock);
 
-#if defined(CONFIG_X86) && defined(CONFIG_SWIOTLB)
-	swiotlb = 0;
-#endif

So this will cause the 64MB SWIOTLB aperture to be allocated even when there will never be an untrusted device in the system, right? I guess this will break some kdump setups as they need to resize their low memory allocations to make room for the aperture because of this patch-set.

But I also don't see a way around this for now as untrusted devices are usually hotplugged and might not be present at boot. So we can't make the decision about the allocation at boot time.

But this mechanism needs to be moved to the dma-iommu implementation at some point, and then we should allocate the bounce memory pages on-demand. We can easily do this in page-size chunks and map them together with iommu page-tables. This way we don't need to pre-allocate a large memory-chunk at boot.

Regards,

Joerg

author
#3 lore raw

Re: [PATCH v7 1/7] iommu/vt-d: Don't switch off swiotlb if use direct dma

Hi Joerg,

Quoted 17 lines · Joerg Roedel
Quoted 16 lines · Lu Baolu
drivers/iommu/intel-iommu.c +0 -3
@@ -4569,9 +4569,6 @@ static int __init platform_optin_force_iommu(void)
  		iommu_identity_mapping |= IDENTMAP_ALL;
 
  	dmar_disabled = 0;
-#if defined(CONFIG_X86) && defined(CONFIG_SWIOTLB)
-	swiotlb = 0;
-#endif
  	no_iommu = 0;
 
  	return 1;
@@ -4710,9 +4707,6 @@ int __init intel_iommu_init(void)
  	}
  	up_write(&dmar_global_lock);
 
Quoted 9 lines

drivers/iommu/intel-iommu.c static int __init platform_optin_force_iommu(void) · line 4574

Quoted 3 lines
drivers/iommu/intel-iommu.c +0 -3
-#if defined(CONFIG_X86) && defined(CONFIG_SWIOTLB)
-	swiotlb = 0;
-#endif

So this will cause the 64MB SWIOTLB aperture to be allocated even when there will never be an untrusted device in the system, right? I guess this will break some kdump setups as they need to resize their low memory allocations to make room for the aperture because of this patch-set.

Yes, you are right. I didn't consider the kdump case.

Quoted 4 lines

But I also don't see a way around this for now as untrusted devices are usually hotplugged and might not be present at boot. So we can't make the decision about the allocation at boot time.

If a system has any external port, through which an untrusted device might be connected, the external port itself should be marked as an untrusted device, and all devices beneath it just inherit this attribution.

So during iommu driver initialization, we can easily know whether the system has (or potentially has) untrusted devices by iterating the device tree. I will add such check in the next version if no objections.

Quoted 10 lines

But this mechanism needs to be moved to the dma-iommu implementation at some point, and then we should allocate the bounce memory pages on-demand. We can easily do this in page-size chunks and map them together with iommu page-tables. This way we don't need to pre-allocate a large memory-chunk at boot.

Regards,

Joerg

Best regards,
Baolu

maintainer
#4 lore raw

Re: [PATCH v7 1/7] iommu/vt-d: Don't switch off swiotlb if use direct dma

Quoted 4 lines · Lu Baolu

If a system has any external port, through which an untrusted device might be connected, the external port itself should be marked as an untrusted device, and all devices beneath it just inherit this attribution.

Okay, makes sense.

Quoted 3 lines

So during iommu driver initialization, we can easily know whether the system has (or potentially has) untrusted devices by iterating the device tree. I will add such check in the next version if no objections.

Sounds good, thanks Baolu.

Joerg