colibri_imx6/imx7/imx8x: use distroboot by default
PATCH 1/2 colibri_imx6/imx7/imx8x: use distroboot by default
From: Igor Opaniuk <[email protected]>
Use distro_bootcmd as defauult bootcmd instead of legacy wrappers.
---
include/configs/colibri-imx8x.h | 1 + include/configs/colibri_imx6.h | 4 ++-- include/configs/colibri_imx7.h | 5 +++-- 3 files changed, 6 insertions(+), 4 deletions(-)
include/configs/colibri-imx8x.h +1 -0
@@ -82,6 +82,7 @@CONFIG_MFG_ENV_SETTINGS \ M4_BOOT_ENV \MEM_LAYOUT_ENV_SETTINGS \ +"boot_file=Image\0" \"console=ttyLP3 earlycon\0" \"fdt_addr=0x83000000\0" \"fdt_file=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
include/configs/colibri_imx6.h +2 -2
@@ -92,6 +92,7 @@#ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES (func) \ + func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ func(USB, usb, 0) \ func(DHCP, dhcp, na)
@@ -168,8 +169,7 @@#define FDT_FILE "imx6dl-colibri-eval-v3.dtb"#define CONFIG_EXTRA_ENV_SETTINGS \ BOOTENV \ - "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \ - "setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \ + "bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd; " \ "usb start ; " \ "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ "boot_file=zImage\0" \
include/configs/colibri_imx7.h +3 -2
@@ -109,7 +109,8 @@"fdt_high=0xffffffff\0" \"initrd_high=0xffffffff\0" \"kernel_addr_r=0x81000000\0" \ - "ramdisk_addr_r=0x82100000\0" +"ramdisk_addr_r=0x82100000\0" \ + "scriptaddr=0x82500000\0"#if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND )#define SD_BOOTDEV 0
@@ -160,7 +161,7 @@"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ UBI_BOOTCMD#elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC ) -#define CONFIG_BOOTCOMMAND "run emmcboot ; echo ; echo emmcboot failed ; " \ +#define CONFIG_BOOTCOMMAND \ "setenv fdtfile ${soc}-colibri-emmc-${fdt_board}.dtb && run distro_bootcmd;"#define MODULE_EXTRA_ENV_SETTINGS \ "variant=-emmc\0" \
Signature · 1 line
2.17.1
PATCH 2/2 apalis_imx6: use distroboot by default
From: Igor Opaniuk <[email protected]>
Use distro_bootcmd as defauult bootcmd instead of legacy wrappers.
---
include/configs/apalis_imx6.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
include/configs/apalis_imx6.h +2 -2
@@ -102,6 +102,7 @@#ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES (func) \ + func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ func(MMC, mmc, 2) \ func(USB, usb, 0) \
@@ -184,8 +185,7 @@#endif #define CONFIG_EXTRA_ENV_SETTINGS \ BOOTENV \ - "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \ - "setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \ + "bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \ "usb start ; " \ "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ "boot_file=zImage\0" \
Signature · 1 line
2.17.1
PATCH 2/2 apalis_imx6: use distroboot by default
Quoted 6 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
Use
distro_bootcmdas defauult bootcmd instead of legacy wrappers.Signed-off-by Igor Opaniuk <[email protected]>
In general:
But if you will push a new version, please fix the typo in comment msg:
s/defauult/default/
Quoted 34 lines
---
include/configs/apalis_imx6.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)include/configs/apalis_imx6.h +2
-3@@ -102,6 +102,7 @@#ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES (func) \ + func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ func(MMC, mmc, 2) \ func(USB, usb, 0) \@@ -184,8 +185,7 @@#endif #define CONFIG_EXTRA_ENV_SETTINGS \ BOOTENV \ - "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \ - "setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \ + "bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \ "usb start ; " \ "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ "boot_file=zImage\0" \ --2.17.1
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
Signature · 4 lines
Best regards Oleksandr Suvorov cryosay at gmail.com
PATCH 1/2 colibri_imx6/imx7/imx8x: use distroboot by default
In reply to Igor OpaniukQuoted 6 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
Use
distro_bootcmdas defauult bootcmd instead of legacy wrappers.Signed-off-by Igor Opaniuk <[email protected]>
In general:
But if you will push a new version, please fix the typo in comment msg:
s/defauult/default/
Quoted 71 lines
---
include/configs/colibri-imx8x.h | 1 + include/configs/colibri_imx6.h | 4 ++-- include/configs/colibri_imx7.h | 5 +++-- 3 files changed, 6 insertions(+), 4 deletions(-)include/configs/colibri-imx8x.h +1
-0@@ -82,6 +82,7 @@CONFIG_MFG_ENV_SETTINGS \ M4_BOOT_ENV \MEM_LAYOUT_ENV_SETTINGS \ +"boot_file=Image\0" \"console=ttyLP3 earlycon\0" \"fdt_addr=0x83000000\0" \"fdt_file=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \include/configs/colibri_imx6.h +2
-2@@ -92,6 +92,7 @@#ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES (func) \ + func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ func(USB, usb, 0) \ func(DHCP, dhcp, na)@@ -168,8 +169,7 @@#define FDT_FILE "imx6dl-colibri-eval-v3.dtb"#define CONFIG_EXTRA_ENV_SETTINGS \ BOOTENV \ - "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \ - "setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \ + "bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd; " \ "usb start ; " \ "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ "boot_file=zImage\0" \include/configs/colibri_imx7.h +3
-3@@ -109,7 +109,8 @@"fdt_high=0xffffffff\0" \"initrd_high=0xffffffff\0" \"kernel_addr_r=0x81000000\0" \ - "ramdisk_addr_r=0x82100000\0" +"ramdisk_addr_r=0x82100000\0" \ + "scriptaddr=0x82500000\0"#if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND )#define SD_BOOTDEV 0@@ -160,7 +161,7 @@"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ UBI_BOOTCMD#elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC ) -#define CONFIG_BOOTCOMMAND "run emmcboot ; echo ; echo emmcboot failed ; " \ +#define CONFIG_BOOTCOMMAND \ "setenv fdtfile ${soc}-colibri-emmc-${fdt_board}.dtb && run distro_bootcmd;"#define MODULE_EXTRA_ENV_SETTINGS \ "variant=-emmc\0" \ --2.17.1
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
Signature · 4 lines
Best regards Oleksandr Suvorov cryosay at gmail.com