ARM: dts: pico-imx7d: Add u-boot.dtsi for uboot specific dts change
Subsystems (2)
PATCH v2 1/3 ARM: dts: pico-imx7d: Add u-boot.dtsi for uboot specific dts change
This commit introduce u-boot.dtsi
Signed-off-by Joris Offouga <[email protected]>
Suggested-by Peng Fan <[email protected]>
--- arch/arm/dts/imx7d-pico-u-boot.dtsi | 11 +++++++++++ arch/arm/dts/imx7d-pico.dtsi | 8 +------- 2 files changed, 12 insertions(+), 7 deletions(-) create mode 100644 arch/arm/dts/imx7d-pico-u-boot.dtsi
arch/arm/dts/imx7d-pico-u-boot.dtsi new file +11 -0
@@ -0,0 +1,11 @@ +/{ + aliases { + mmc0 = &usdhc3; + usb0 = &usbotg1; + }; +}; + +&usbotg1 { + dr_mode = "peripheral"; + }; +
arch/arm/dts/imx7d-pico.dtsi +1 -7
@@ -5,14 +5,9 @@ /dts-v1/; #include "imx7d.dtsi" - +#include "imx7d-pico-u-boot.dtsi" / { - aliases { - mmc0 = &usdhc3; - usb0 = &usbotg1; - }; - /* Will be filled by the bootloader */ memory at 80000000 { device_type = "memory";
@@ -297,7 +292,6 @@ &usbotg1 { vbus-supply = <®_usb_otg1_vbus>; - dr_mode = "peripheral"; status = "okay"; };
Signature · 1 line
2.17.1
PATCH v2 2/3 ARM: dts: pico-imx7d: sync device tree with v5.3-rc6
Synchronize device tree with v5.3-rc6 label
Signed-off-by Joris Offouga <[email protected]>
--- arch/arm/dts/imx7d-pico.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/dts/imx7d-pico.dtsi +1 -1
@@ -93,7 +93,7 @@ <&clks IMX7D_ENET1_TIME_ROOT_CLK>; assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; assigned-clock-rates = <0>, <100000000>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <ðphy0>; fsl,magic-packet; phy-reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
Signature · 1 line
2.17.1
PATCH v2 3/3 configs: pico-imx7d: Convert to DM_VIDEO
In reply to Joris OffougaThis commit convert all pico-imx7d to DM_VIDEO
Signed-off-by Joris Offouga <[email protected]>
--- arch/arm/dts/imx7d-pico-u-boot.dtsi | 113 +++++++++++++++++++++++ board/technexion/pico-imx7d/pico-imx7d.c | 48 ++++------ configs/pico-hobbit-imx7d_defconfig | 2 +- configs/pico-imx7d_bl33_defconfig | 2 +- configs/pico-imx7d_defconfig | 2 +- configs/pico-pi-imx7d_defconfig | 2 +- include/configs/pico-imx7d.h | 2 +- 7 files changed, 135 insertions(+), 36 deletions(-)
arch/arm/dts/imx7d-pico-u-boot.dtsi +113 -0
@@ -2,10 +2,123 @@ aliases { mmc0 = &usdhc3; usb0 = &usbotg1; + display0 = &lcdif; }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + pwms = <&pwm4 0 50000 0>; + brightness-levels = <0 36 72 108 144 180 216 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + reg_lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + panel { + compatible = "vxt,vl050-8048nt-c01"; + backlight = <&backlight>; + power-supply = <®_lcd_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; }; &usbotg1 { dr_mode = "peripheral"; }; +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif>; + status = "okay"; + display = <&display0>; + u-boot,dm-pre-reloc; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + + display0: display { + bits-per-pixel = <16>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33260000>; + hactive = <800>; + vactive = <480>; + hback-porch = <11>; + hfront-porch = <11>; + vback-porch = <12>; + vfront-porch = <11>; + hsync-len = <46>; + vsync-len = <210>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + interlaced = <0>; + }; + }; + }; +}; + +&iomuxc { + pinctrl_backlight: backlight { + fsl,pins = < + MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x0 + >; + }; + + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 + MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79 + MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79 + MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79 + MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79 + MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79 + MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79 + MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79 + MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79 + MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79 + MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79 + MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79 + MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79 + MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79 + MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79 + MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79 + MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79 + MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79 + MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79 + MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79 + MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79 + MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79 + MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79 + MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79 + MX7D_PAD_LCD_CLK__LCD_CLK 0x79 + MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x78 + MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x78 + MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x78 + MX7D_PAD_LCD_RESET__GPIO3_IO4 0x14 + >; + }; + +};
board/technexion/pico-imx7d/pico-imx7d.c +17 -31
68 lines not on this page · raw message
configs/pico-hobbit-imx7d_defconfig +1 -1
@@ -66,4 +66,4 @@ CONFIG_USB_GADGET_MANUFACTURER="FSL" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y -CONFIG_VIDEO=y +CONFIG_DM_VIDEO=y
configs/pico-imx7d_bl33_defconfig +1 -1
@@ -62,5 +62,5 @@ CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_USB_ETHER=y CONFIG_USB_ETH_CDC=y CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00" -CONFIG_VIDEO=y +CONFIG_DM_VIDEO=y CONFIG_OF_LIBFDT_OVERLAY=y
configs/pico-imx7d_defconfig +1 -1
@@ -66,4 +66,4 @@ CONFIG_USB_GADGET_MANUFACTURER="FSL" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y -CONFIG_VIDEO=y +CONFIG_DM_VIDEO=y
configs/pico-pi-imx7d_defconfig +1 -1
@@ -66,4 +66,4 @@ CONFIG_USB_GADGET_MANUFACTURER="FSL" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y -CONFIG_VIDEO=y +CONFIG_DM_VIDEO=y
include/configs/pico-imx7d.h +1 -1
@@ -163,7 +163,7 @@#define CONFIG_POWER_PFUZE3000 #define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 -#ifdef CONFIG_VIDEO +#ifdef CONFIG_DM_VIDEO #define CONFIG_VIDEO_MXS #define CONFIG_VIDEO_LOGO #define CONFIG_SPLASH_SCREEN
Signature · 1 line
2.17.1